-
Temperature-invariant heat conductivity from compensating crystalline and glassy transport: from the Steinbach meteorite to furnace bricks
Authors:
Michele Simoncelli,
Daniele Fournier,
Massimiliano Marangolo,
Etienne Balan,
Keevin Béneut,
Benoit Baptiste,
Béatrice Doisneau,
Nicola Marzari,
Francesco Mauri
Abstract:
The thermal conductivities of crystals and glasses vary strongly and with opposite trends upon heating, decreasing in crystals and increasing in glasses. Here, we show--both with first-principles predictions based on the Wigner transport equation and with thermoreflectance experiments--that the dominant transport mechanisms of crystals (particle-like propagation) and glasses (wave-like tunnelling)…
▽ More
The thermal conductivities of crystals and glasses vary strongly and with opposite trends upon heating, decreasing in crystals and increasing in glasses. Here, we show--both with first-principles predictions based on the Wigner transport equation and with thermoreflectance experiments--that the dominant transport mechanisms of crystals (particle-like propagation) and glasses (wave-like tunnelling) can coexist and compensate in materials with crystalline bond order and nearly glassy bond geometry. We demonstrate that ideal compensation emerges in a sample of silica in the form of tridymite, carved from a meteorite found in Steinbach (Germany) in 1724, and yields a "propagation-tunneling-invariant" (PTI) conductivity that is independent from temperature and intermediate between the opposite trends of $α$-quartz crystal and silica glass. We show how such PTI conductivity occurs in the quantum regime below the Debye temperature, and can largely persist at high temperatures in a geometrically amorphous tridymite phase found in refractory bricks fired for years in furnaces for steel smelting. Last, we discuss implications to heat transfer in solids exposed to extreme temperature variations, ranging from planetary cooling to heating protocols to reduce the carbon footprint of industrial furnaces.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Inferring solar differential rotation and viscosity via passive imaging with inertial waves
Authors:
Tram Thi Ngoc Nguyen,
Thorsten Hohage,
Damien Fournier,
Laurent Gizon
Abstract:
The recent discovery of inertial waves on the surface of the Sun offers new possibilities to learn about the solar interior. These waves are long-lived with a period on the order of the Sun rotation period ($\sim$27 days) and are sensitive to parameters deep inside the Sun. They are excited by turbulent convection, leading to a passive imaging problem. In this work, we present the forward and inve…
▽ More
The recent discovery of inertial waves on the surface of the Sun offers new possibilities to learn about the solar interior. These waves are long-lived with a period on the order of the Sun rotation period ($\sim$27 days) and are sensitive to parameters deep inside the Sun. They are excited by turbulent convection, leading to a passive imaging problem. In this work, we present the forward and inverse problem of reconstructing viscosity and differential rotation on the Sun from cross-covariance observations of these inertial waves.
△ Less
Submitted 22 March, 2024; v1 submitted 1 March, 2024;
originally announced March 2024.
-
Infrared Imaging using thermally stable HgTe/CdS nanocrystals
Authors:
Huichen Zhang,
Yoann Prado,
Rodolphe Alchaar,
Henri Lehouelleur,
Mariarosa Cavallo,
Tung Huu Dang,
Adrien Khalili,
Erwan Bossavit,
Corentin Dabard,
Nicolas Ledos,
Mathieu G Silly,
Ali Madouri,
Daniele Fournier,
James K. Utterback,
Debora Pierucci,
Victor Parahyba,
Pierre Potet,
David Darson,
Sandrine Ithurria,
Bartłomiej Szafran,
Benjamin T. Diroll,
Juan I. Climente,
Emmanuel Lhuillier
Abstract:
Transferring the nanocrystals (NCs) from the laboratory environment toward practical applications has raised new challenges. In the case of NCs for display and lightning, the focus was on reduced Auger recombination and maintaining luminescence at high temperatures. When it comes to infrared sensing, narrow band gap materials are required and HgTe appears as the most spectrally tunable platform. I…
▽ More
Transferring the nanocrystals (NCs) from the laboratory environment toward practical applications has raised new challenges. In the case of NCs for display and lightning, the focus was on reduced Auger recombination and maintaining luminescence at high temperatures. When it comes to infrared sensing, narrow band gap materials are required and HgTe appears as the most spectrally tunable platform. Its low-temperature synthesis reduces the growth energy cost yet also favors sintering. As a result, once coupled to a read-out circuit, the Joule effect aggregates the particles leading to a poorly defined optical edge and dramatically large dark current. Here, we demonstrate that CdS shells bring the expected thermal stability (no redshift upon annealing, reduced tendency to form amalgams and preservation of photoconduction after an atomic layer deposition process). The peculiar electronic structure of these confined particles is unveiled using k.p self-consistent simulations showing a significant exciton biding energy at around 200 meV. After shelling, the material displays a p-type behavior that favors the generation of photoconductive gain. The latter is then used to increase the external quantum
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
Learned infinite elements for helioseismology -- Learning transparent boundary conditions for the solar atmosphere
Authors:
Damien Fournier,
Janosch Preuss,
Thorsten Hohage,
Laurent Gizon
Abstract:
Context. Acoustic waves in the Sun are affected by the atmospheric layers, but this region is often ignored in forward models due to the increase in computational cost. Aims. The purpose of this work is to take into account the solar atmosphere without increasing significantly the computational cost. Methods. We solve a scalar wave equation that describes the propagation of acoustic modes inside t…
▽ More
Context. Acoustic waves in the Sun are affected by the atmospheric layers, but this region is often ignored in forward models due to the increase in computational cost. Aims. The purpose of this work is to take into account the solar atmosphere without increasing significantly the computational cost. Methods. We solve a scalar wave equation that describes the propagation of acoustic modes inside the Sun using a finite element method. The boundary conditions used to truncate the computational domain are learned from the Dirichlet-to-Neumann operator, that is the relation between the solution and its normal derivative at the computational boundary. These boundary conditions may be applied at any height above which the background medium is assumed to be radially symmetric. Results. Taking into account the atmosphere is important even for wave frequencies below the acoustic cut-off. In particular, the mode frequencies computed for an isothermal atmosphere differ by up 10 μHz from those computed for the VAL-C atmospheric model. We show that learned infinite elements lead to a numerical accuracy similar to that obtained for a traditional radiation boundary condition. Its main advantage is to reproduce the solution for any radially symmetric atmosphere to a very good accuracy at a low computational cost. Conclusions. This work emphasizes the importance of including atmospheric layers in helioseismology and proposes a computationally efficient method to do so.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Assembling algorithm for Green's tensors and absorbing boundary conditions for Galbrun's equation in radial symmetry
Authors:
Ha Pham,
Florian Faucher,
Damien Fournier,
Hélène Barucq,
Laurent Gizon
Abstract:
Solar oscillations can be modeled by Galbrun's equation which describes Lagrangian wave displacement in a self-gravitating stratified medium. For spherically symmetric backgrounds, we construct an algorithm to compute efficiently and accurately the coefficients of the Green's tensor of the time-harmonic equation in vector spherical harmonic basis. With only two resolutions, our algorithm provides…
▽ More
Solar oscillations can be modeled by Galbrun's equation which describes Lagrangian wave displacement in a self-gravitating stratified medium. For spherically symmetric backgrounds, we construct an algorithm to compute efficiently and accurately the coefficients of the Green's tensor of the time-harmonic equation in vector spherical harmonic basis. With only two resolutions, our algorithm provides values of the kernels for all heights of source and receiver, and prescribes analytically the singularities of the kernels. We also derive absorbing boundary conditions (ABC) to model wave propagation in the atmosphere above the cut-off frequency. The construction of ABC, which contains varying gravity terms, is rendered difficult by the complex behavior of the solar potential in low atmosphere and for frequencies below the Lamb frequency. We carry out extensive numerical investigations to compare and evaluate the efficiency of the ABCs in capturing outgoing solutions. Finally, as an application towards helioseismology, we compute synthetic solar power spectra that contain pressure modes as well as internal-gravity (g-) and surface-gravity (f-) ridges which are missing in simpler approximations of the wave equation. For purpose of validation, the location of the ridges in the synthetic power spectra are compared with observed solar modes.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Quantitative passive imaging by iterative holography: The example of helioseismic holography
Authors:
Björn Müller,
Thorsten Hohage,
Damien Fournier,
Laurent Gizon
Abstract:
In passive imaging, one attempts to reconstruct some coefficients in a wave equation from correlations of observed randomly excited solutions to this wave equation. Many methods proposed for this class of inverse problem so far are only qualitative, e.g., trying to identify the support of a perturbation. Major challenges are the increase in dimensionality when computing correlations from primary d…
▽ More
In passive imaging, one attempts to reconstruct some coefficients in a wave equation from correlations of observed randomly excited solutions to this wave equation. Many methods proposed for this class of inverse problem so far are only qualitative, e.g., trying to identify the support of a perturbation. Major challenges are the increase in dimensionality when computing correlations from primary data in a preprocessing step, and often very poor pointwise signal-to-noise ratios. In this paper, we propose an approach that addresses both of these challenges: It works only on the primary data while implicitly using the full information contained in the correlation data, and it provides quantitative estimates and convergence by iteration.
Our work is motivated by helioseismic holography, a well-established imaging method to map heterogenities and flows in the solar interior. We show that the back-propagation used in classical helioseismic holography can be interpreted as the adjoint of the Fréchet derivative of the operator which maps the properties of the solar interior to the correlation data on the solar surface. The theoretical and numerical framework for passive imaging problems developed in this paper extends helioseismic holography to nonlinear problems and allows for quantitative reconstructions. We present a proof of concept in uniform media.
△ Less
Submitted 11 March, 2024; v1 submitted 5 October, 2023;
originally announced October 2023.
-
Contribution of flows around active regions to the north-south helioseismic travel-time measurements
Authors:
Paul-Louis Poulier,
Zhi-Chao Liang,
Damien Fournier,
Laurent Gizon
Abstract:
Context. In local helioseismology, the travel times of acoustic waves propagating in opposite directions along the same meridian inform us about horizontal flows in the north-south direction. The longitudinal averages of the north-south helioseismic travel-time shifts vary with the sunspot cycle. Aims. We aim to study the contribution of inflows into solar active regions to this solar-cycle variat…
▽ More
Context. In local helioseismology, the travel times of acoustic waves propagating in opposite directions along the same meridian inform us about horizontal flows in the north-south direction. The longitudinal averages of the north-south helioseismic travel-time shifts vary with the sunspot cycle. Aims. We aim to study the contribution of inflows into solar active regions to this solar-cycle variation. Methods. To do so, we identify the local flows around active regions in the horizontal flow maps obtained from correlation tracking of granulation in SDO/HMI continuum images. We compute the forward-modeled travel-time perturbations caused by these inflows using 3D sensitivity kernels. In order to compare with the observations, we average these forward-modeled travel-time perturbations over longitude and time in the same way as the measured travel times. Results. The forward-modeling approach shows that the inflows associated with active regions may account for only a fraction of the solar-cycle variations in the north-south travel-time measurements. Conclusions. The travel-time perturbations caused by the large-scale inflows surrounding the active regions do not explain in full the solar-cycle variations seen in the helioseismic measurements of the meridional circulation.
Keywords: Sun: activity -- Sun: helioseismology
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Viscous inertial modes on a differentially rotating sphere: Comparison with solar observations
Authors:
Damien Fournier,
Laurent Gizon,
Laura Hyest
Abstract:
In a previous paper we studied the effect of latitudinal rotation on solar equatorial Rossby modes in the beta-plane approximation. Since then, a rich spectrum of inertial modes has been observed on the Sun, which is not limited to the equatorial Rossby modes and includes high-latitude modes.
Here we extend the computation of toroidal modes in 2D to spherical geometry, using realistic solar diff…
▽ More
In a previous paper we studied the effect of latitudinal rotation on solar equatorial Rossby modes in the beta-plane approximation. Since then, a rich spectrum of inertial modes has been observed on the Sun, which is not limited to the equatorial Rossby modes and includes high-latitude modes.
Here we extend the computation of toroidal modes in 2D to spherical geometry, using realistic solar differential rotation and including viscous dam**. The aim is to compare the computed mode spectra with the observations and to study mode stability.
At fixed radius, we solve the eigenvalue problem numerically using a spherical harmonics decomposition of the velocity stream function. Due to the presence of viscous critical layers, the spectrum consists of four different families: Rossby modes, high-latitude modes, critical-latitude modes, and strongly damped modes. For each longitudinal wavenumber m<4, up to three Rossby-like modes are present on the sphere, in contrast to the equatorial beta plane where only the equatorial Rossby mode is present. The least damped modes in the model have eigenfrequencies and eigenfunctions that resemble the observed modes; the comparison improves when the radius is taken in the lower half of the convection zone. For radii above 0.75R and Ekman numbers E<10^{-4}, at least one mode is unstable. For either m=1 or m=2, up to two Rossby modes are unstable when the radial dependence of the Ekman number follows a quenched diffusivity model (E=2. 10^{-5} at the base of the convection zone). For m=3, up to two Rossby modes can be unstable, including the equatorial Rossby mode.
Although the 2D model discussed here is highly simplified, the spectrum of toroidal modes appears to include many of the observed solar inertial modes. The self-excited modes in the model have frequencies close to those of the observed modes with the largest amplitudes.
△ Less
Submitted 28 April, 2022;
originally announced April 2022.
-
The Effect of Stellar Contamination on Low-resolution Transmission Spectroscopy: Needs Identified by NASA's Exoplanet Exploration Program Study Analysis Group 21
Authors:
Benjamin V. Rackham,
Néstor Espinoza,
Svetlana V. Berdyugina,
Heidi Korhonen,
Ryan J. MacDonald,
Benjamin T. Montet,
Brett M. Morris,
Mahmoudreza Oshagh,
Alexander I. Shapiro,
Yvonne C. Unruh,
Elisa V. Quintana,
Robert T. Zellem,
Dániel Apai,
Thomas Barclay,
Joanna K. Barstow,
Giovanni Bruno,
Ludmila Carone,
Sarah L. Casewell,
Heather M. Cegla,
Serena Criscuoli,
Catherine Fischer,
Damien Fournier,
Mark S. Giampapa,
Helen Giles,
Aishwarya Iyer
, et al. (36 additional authors not shown)
Abstract:
Study Analysis Group 21 (SAG21) of NASA's Exoplanet Exploration Program Analysis Group (ExoPAG) was organized to study the effect of stellar contamination on space-based transmission spectroscopy, a method for studying exoplanetary atmospheres by measuring the wavelength-dependent radius of a planet as it transits its star. Transmission spectroscopy relies on a precise understanding of the spectru…
▽ More
Study Analysis Group 21 (SAG21) of NASA's Exoplanet Exploration Program Analysis Group (ExoPAG) was organized to study the effect of stellar contamination on space-based transmission spectroscopy, a method for studying exoplanetary atmospheres by measuring the wavelength-dependent radius of a planet as it transits its star. Transmission spectroscopy relies on a precise understanding of the spectrum of the star being occulted. However, stars are not homogeneous, constant light sources but have temporally evolving photospheres and chromospheres with inhomogeneities like spots, faculae, plages, granules, and flares. This SAG brought together an interdisciplinary team of more than 100 scientists, with observers and theorists from the heliophysics, stellar astrophysics, planetary science, and exoplanetary atmosphere research communities, to study the current research needs that can be addressed in this context to make the most of transit studies from current NASA facilities like HST and JWST. The analysis produced 14 findings, which fall into three Science Themes encompassing (1) how the Sun is used as our best laboratory to calibrate our understanding of stellar heterogeneities ("The Sun as the Stellar Benchmark"), (2) how stars other than the Sun extend our knowledge of heterogeneities ("Surface Heterogeneities of Other Stars") and (3) how to incorporate information gathered for the Sun and other stars into transit studies ("Map** Stellar Knowledge to Transit Studies"). In this invited review, we largely reproduce the final report of SAG21 as a contribution to the peer-reviewed literature.
△ Less
Submitted 17 March, 2023; v1 submitted 24 January, 2022;
originally announced January 2022.
-
Solar inertial modes: Observations, identification, and diagnostic promise
Authors:
Laurent Gizon,
Robert H. Cameron,
Yuto Bekki,
Aaron C. Birch,
Richard S. Bogart,
Allan Sacha Brun,
Cilia Damiani,
Damien Fournier,
Laura Hyest,
Kiran Jain,
B. Lekshmi,
Zhi-Chao Liang,
Bastian Proxauf
Abstract:
The oscillations of a slowly rotating star have long been classified into spheroidal and toroidal modes. The spheroidal modes include the well-known 5-min acoustic modes used in helioseismology. Here we report observations of the Sun's toroidal modes, for which the restoring force is the Coriolis force and whose periods are on the order of the solar rotation period. By comparing the observations w…
▽ More
The oscillations of a slowly rotating star have long been classified into spheroidal and toroidal modes. The spheroidal modes include the well-known 5-min acoustic modes used in helioseismology. Here we report observations of the Sun's toroidal modes, for which the restoring force is the Coriolis force and whose periods are on the order of the solar rotation period. By comparing the observations with the normal modes of a differentially rotating spherical shell, we are able to identify many of the observed modes. These are the high-latitude inertial modes, the critical-latitude inertial modes, and the equatorial Rossby modes. In the model, the high-latitude and critical-latitude modes have maximum kinetic energy density at the base of the convection zone, and the high-latitude modes are baroclinically unstable due to the latitudinal entropy gradient. As a first application of inertial-mode helioseismology, we constrain the superadiabaticity and the turbulent viscosity in the deep convection zone.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Modelling continuum intensity perturbations caused by solar acoustic oscillations
Authors:
N. M. Kostogryz,
D. Fournier,
L. Gizon
Abstract:
Helioseismology is the study of the solar interior using observations of oscillations at the surface. It suffers from systematic errors, such as a center-to-limb error in travel-time measurements. Understanding these errors requires a good understanding of the nontrivial relationship between wave displacement and helioseismic observables. The wave displacement causes perturbations in the atmospher…
▽ More
Helioseismology is the study of the solar interior using observations of oscillations at the surface. It suffers from systematic errors, such as a center-to-limb error in travel-time measurements. Understanding these errors requires a good understanding of the nontrivial relationship between wave displacement and helioseismic observables. The wave displacement causes perturbations in the atmospheric thermodynamical quantities which perturb the opacity, the optical depth, the source function, and the local ray geometry, thus affecting the emergent intensity. We aim to establish the most complete relationship up to now between the displacement and the intensity perturbation by solving the radiative transfer problem in the atmosphere. We derive an expression for the intensity perturbation caused by acoustic oscillations at any point on the solar disk by applying the first-order perturbation theory. As input, we consider adiabatic modes of oscillation of different degrees. The background and the perturbed intensities are computed considering the main sources of opacity in the continuum. We find that, for all modes, the perturbations to the thermodynamical quantities are not sufficient to model the intensity. In addition, the geometrical effects due to the displacement must be taken into account as they lead to a difference in amplitude and a phase shift between the temperature at the surface and intensity perturbations. The closer to the limb, the larger the differences. This work presents improvements for the computation of the intensity perturbations, in particular for high-degree modes, and explains differences in intensity computations in earlier works. The phase shifts and amplitude differences between the temperature and intensity perturbations increase towards the limb. This should help to interpret some of the systematic center-to-limb effects observed in local helioseismology.
△ Less
Submitted 15 July, 2021;
originally announced July 2021.
-
Acoustic wave propagation through solar granulation: Validity of effective-medium theories, coda waves
Authors:
P. -L. Poulier,
D. Fournier,
L. Gizon,
T. L. Duvall Jr
Abstract:
Context. The frequencies, lifetimes, and eigenfunctions of solar acoustic waves are affected by turbulent convection, which is random in space and in time. Since the correlation time of solar granulation and the periods of acoustic waves ($\sim$5 min) are similar, the medium in which the waves propagate cannot a priori be assumed to be time independent. Aims. We compare various effective-medium so…
▽ More
Context. The frequencies, lifetimes, and eigenfunctions of solar acoustic waves are affected by turbulent convection, which is random in space and in time. Since the correlation time of solar granulation and the periods of acoustic waves ($\sim$5 min) are similar, the medium in which the waves propagate cannot a priori be assumed to be time independent. Aims. We compare various effective-medium solutions with numerical solutions in order to identify the approximations that can be used in helioseismology. For the sake of simplicity, the medium is one dimensional. Methods. We consider the Keller approximation, the second-order Born approximation, and spatial homogenization to obtain theoretical values for the effective wave speed and attenuation (averaged over the realizations of the medium). Numerically, we computed the first and second statistical moments of the wave field over many thousands of realizations of the medium (finite-amplitude sound-speed perturbations are limited to a 30 Mm band and have a zero mean). Results. The effective wave speed is reduced for both the theories and the simulations. The attenuation of the coherent wave field and the wave speed are best described by the Keller theory. The numerical simulations reveal the presence of coda waves, trailing the coherent wave packet. These late arrival waves are due to multiple scattering and are easily seen in the second moment of the wave field. Conclusions. We find that the effective wave speed can be calculated, numerically and theoretically, using a single snapshot of the random medium (frozen medium); however, the attenuation is underestimated in the frozen medium compared to the time-dependent medium. Multiple scattering cannot be ignored when modeling acoustic wave propagation through solar granulation.
△ Less
Submitted 13 October, 2020; v1 submitted 2 October, 2020;
originally announced October 2020.
-
C2 representations of the solar background coefficients for the model S-AtmoI
Authors:
Florian Faucher,
Damien Fournier,
Ha Pham
Abstract:
We construct C2 representations of the background quantities that characterize the interior of the Sun and its atmosphere starting from the data-points of the standard solar model S. This model is further extended considering an isothermal atmosphere, that we refer to as model AtmoI. It is not trivial to build the C2 representations of the parameters from a discrete set of values, in particular in…
▽ More
We construct C2 representations of the background quantities that characterize the interior of the Sun and its atmosphere starting from the data-points of the standard solar model S. This model is further extended considering an isothermal atmosphere, that we refer to as model AtmoI. It is not trivial to build the C2 representations of the parameters from a discrete set of values, in particular in the transition region between the end of model S and the atmosphere. This technical work is needed as a crucial building block to study theoretically and numerically the propagation of waves in the Sun, using the equations of solar oscillations (also referred to as Galbrun's equation in aeroacoustics). The constructed models are available at http://phaidra.univie.ac.at/o:1097638.
△ Less
Submitted 3 September, 2020;
originally announced September 2020.
-
Effect of latitudinal differential rotation on solar Rossby waves: Critical layers, eigenfunctions, and momentum fluxes in the equatorial $β$ plane
Authors:
L. Gizon,
D. Fournier,
M. Albekioni
Abstract:
Retrograde-propagating waves of vertical vorticity with longitudinal wavenumbers between 3 and 15 have been observed on the Sun with a dispersion relation close to that of classical sectoral Rossby waves. The observed vorticity eigenfunctions are symmetric in latitude, peak at the equator, switch sign near $20^\circ$-$30^\circ$, and decrease at higher latitudes. We search for an explanation that t…
▽ More
Retrograde-propagating waves of vertical vorticity with longitudinal wavenumbers between 3 and 15 have been observed on the Sun with a dispersion relation close to that of classical sectoral Rossby waves. The observed vorticity eigenfunctions are symmetric in latitude, peak at the equator, switch sign near $20^\circ$-$30^\circ$, and decrease at higher latitudes. We search for an explanation that takes into account solar latitudinal differential rotation. In the equatorial $β$ plane, we study the propagation of linear Rossby waves (phase speed $c <0$) in a parabolic zonal shear flow, $U = - \overline{U}\ ξ^2<0$, where $\overline{U} = 244$ m/s and $ξ$ is the sine of latitude. In the inviscid case, the eigenvalue spectrum is real and continuous and the velocity stream functions are singular at the critical latitudes where $U = c$. We add eddy viscosity in the problem to account for wave attenuation. In the viscous case, the stream functions are solution of a fourth-order modified Orr-Sommerfeld equation. Eigenvalues are complex and discrete. For reasonable values of the eddy viscosity corresponding to supergranular scales and above (Reynolds number $100 \le Re \le 700$), all modes are stable. At fixed longitudinal wavenumber, the least damped mode is a symmetric mode with a real frequency close to that of the classical Rossby mode, which we call the R mode. For $Re \approx 300$, the attenuation and the real part of the eigenfunction is in qualitative agreement with the observations (unlike the imaginary part of the eigenfunction, which has a larger amplitude in the model. Conclusion: Each longitudinal wavenumber is associated with a latitudinally symmetric R mode trapped at low latitudes by solar differential rotation. In the viscous model, R modes transport significant angular momentum from the dissipation layers towards the equator.
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
Predicting frequency changes of global-scale solar Rossby modes due to solar cycle changes in internal rotation
Authors:
C. R. Goddard,
A. C. Birch,
D. Fournier,
L. Gizon
Abstract:
Context. Large-scale equatorial Rossby modes have been observed on the Sun over the last two solar cycles. Aims. We investigate the impact of the time-varying zonal flows on the frequencies of Rossby modes. Methods. A first-order perturbation theory approach is used to obtain an expression for the expected shift in the mode frequencies due to perturbations in the internal rotation rate. Results. U…
▽ More
Context. Large-scale equatorial Rossby modes have been observed on the Sun over the last two solar cycles. Aims. We investigate the impact of the time-varying zonal flows on the frequencies of Rossby modes. Methods. A first-order perturbation theory approach is used to obtain an expression for the expected shift in the mode frequencies due to perturbations in the internal rotation rate. Results. Using the time-varying rotation from helioseismic inversions we predict the changes in Rossby mode frequencies with azimuthal orders from m = 1 to m = 15 over the last two solar cycles. The peak-to-peak frequency change is less than 1 nHz for the m = 1 mode, grows with m, and reaches 25 nHz for m = 15. Conclusions. Given the observational uncertainties on mode frequencies due to the finite mode lifetimes, we find that the predicted frequency shifts are near the limit of detectability.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
Thermal conductivity of Bi$_2$Se$_3$ from bulk to thin films: theory and experiment
Authors:
Lorenzo Paulatto,
Danièle Fournier,
Massimiliano Marangolo,
Mahmoud Eddrief,
Paola Atkinson,
Matteo Calandra
Abstract:
We calculate the lattice-driven in-plane $(κ_{\parallel})$ and out-of-plane $(κ_{\perp})$ thermal conductivities of Bi$_2$Se$_3$ bulk, and of films of different thicknesses, using the Boltzmann equation with phonon scattering times obtained from anharmonic third order density functional perturbation theory.
We compare our results for the lattice component of the thermal conductivity with publish…
▽ More
We calculate the lattice-driven in-plane $(κ_{\parallel})$ and out-of-plane $(κ_{\perp})$ thermal conductivities of Bi$_2$Se$_3$ bulk, and of films of different thicknesses, using the Boltzmann equation with phonon scattering times obtained from anharmonic third order density functional perturbation theory.
We compare our results for the lattice component of the thermal conductivity with published data for $κ_{\parallel}$ on bulk samples and with our room-temperature thermoreflectance measurements of $κ_{\perp}$ on films of thickness (L) ranging from 18~nm to 191~nm, where the lattice component has been extracted via the Wiedemann-Franz law. Ab-initio theoretical calculations on bulk samples, including an effective model to account for finite sample thickness and defect scattering, compare favorably both for the bulk case (from literature) and thin films (new measurements). In the low-T limit the theoretical in-plane lattice thermal conductivity of bulk Bi$_2$Se$_3$ agrees with previous measurements by assuming the occurrence of intercalated Bi$_2$ layer defects. The measured thermal conductivity monotonically decreases by reducing $L$, its value is $κ_{\perp}\approx 0.39\pm 0.08$~W/m$\cdot$K for $L=18$ nm and $κ_{\perp}=0.68\pm0.14$~W/m$\cdot$K for $L=191$ nm. We show that the decrease of room-temperature $κ_{\perp}$ in Bi$_2$Se$_3$ thin films as a function of sample thickness can be explained by the incoherent scattering of out-of-plane momentum phonons with the film surface. Our work outlines the crucial role of sample thinning in reducing the out-of-plane thermal conductivity.
△ Less
Submitted 23 March, 2020; v1 submitted 13 December, 2019;
originally announced December 2019.
-
Signal and noise in helioseismic holography
Authors:
Laurent Gizon,
Damien Fournier,
Dan Yang,
Aaron C. Birch,
Hélène Barucq
Abstract:
Helioseismic holography is an imaging technique used to study heterogeneities and flows in the solar interior from observations of solar oscillations at the surface. Holograms contain noise due to the stochastic nature of solar oscillations. We provide a theoretical framework for modeling signal and noise in Porter-Bojarski helioseismic holography. The wave equation may be recast into a Helmholtz-…
▽ More
Helioseismic holography is an imaging technique used to study heterogeneities and flows in the solar interior from observations of solar oscillations at the surface. Holograms contain noise due to the stochastic nature of solar oscillations. We provide a theoretical framework for modeling signal and noise in Porter-Bojarski helioseismic holography. The wave equation may be recast into a Helmholtz-like equation, so as to connect with the acoustics literature and define the holography Green's function in a meaningful way. Sources of wave excitation are assumed to be stationary, horizontally homogeneous, and spatially uncorrelated. Using the first Born approximation we calculate holograms in the presence of perturbations in sound-speed, density, flows, and source covariance, as well as the noise level as a function of position. This work is a direct extension of the methods used in time-distance helioseismology to model signal and noise. To illustrate the theory, we compute the hologram intensity numerically for a buried sound-speed perturbation at different depths in the solar interior. The reference Green's function is obtained for a spherically-symmetric solar model using a finite-element solver in the frequency domain. Below the pupil area on the surface, we find that the spatial resolution of the hologram intensity is very close to half the local wavelength. For a sound-speed perturbation of size comparable to the local spatial resolution, the signal-to-noise ratio is approximately constant with depth. Averaging the hologram intensity over a number $N$ of frequencies above 3 mHz increases the signal-to-noise ratio by a factor nearly equal to the square root of $N$. This may not be the case at lower frequencies, where large variations in the holographic signal are due to the individual contributions of the long-lived modes of oscillation.
△ Less
Submitted 30 September, 2018;
originally announced October 2018.
-
Effect of ion-implantation-induced defects and Mg dopants on thermoelectric properties of ScN
Authors:
Nina Tureson,
Marc Marteau,
Thierry Cabioch,
Ngo Van Nong,
Jens Jensen,
Jun Lu,
Grzegorz Greczynski,
Daniele Fournier,
Niraj Singh,
Ajay Soni,
Laurent Belliard,
Per Eklund,
Arnaud le Febvrier
Abstract:
For applications in energy harvesting, environmentally friendly cooling, and as power sources in remote or portable applications, it is desired to enhance the efficiency of thermoelectric materials. One strategy consists of reducing the thermal conductivity while increasing or retaining the thermoelectric power factor. An approach to achieve this is do** to enhance the Seebeck coefficient and el…
▽ More
For applications in energy harvesting, environmentally friendly cooling, and as power sources in remote or portable applications, it is desired to enhance the efficiency of thermoelectric materials. One strategy consists of reducing the thermal conductivity while increasing or retaining the thermoelectric power factor. An approach to achieve this is do** to enhance the Seebeck coefficient and electrical conductivity, while simultaneously introducing defects in the materials to increase phonon scattering. Here, we use Mg ion implantation to induce defects in epitaxial ScN (111) films. The films were implanted with Mg+ ions with different concentration profiles along the thickness of the film, incorporating 0.35 to 2.2 at.% of Mg in ScN. Implantation at high temperature (600 C), with few defects due to the temperature, does not substantially affect the thermal conductivity compared to a reference ScN. Samples implanted at room temperature, in contrast, exhibited a reduction of the thermal conductivity by a factor of three. The sample doped with 2.2 at.% Mg also showed an increased power factor after implantation. This study thus shows the effect of ion-induced defects on thermal conductivity of ScN films. High-temperature implantation allows the defects to be annealed out during implantation, while the defects are retained for room-temperature implanted samples, allowing for a drastic reduction in thermal conductivity.
△ Less
Submitted 24 September, 2018;
originally announced September 2018.
-
Sensitivity kernels for time-distance helioseismology: efficient computation for spherically-symmetric solar models
Authors:
Damien Fournier,
Chris S. Hanson,
Laurent Gizon,
Helene Barucq
Abstract:
The interpretation of helioseismic measurements, such as wave travel-time, is based on the computation of kernels that give the sensitivity of the measurements to localized changes in the solar interior. These are computed using the ray or the Born approximation. The Born approximation is preferable as it takes finite-wavelength effects into account, but can be computationally expensive. We propos…
▽ More
The interpretation of helioseismic measurements, such as wave travel-time, is based on the computation of kernels that give the sensitivity of the measurements to localized changes in the solar interior. These are computed using the ray or the Born approximation. The Born approximation is preferable as it takes finite-wavelength effects into account, but can be computationally expensive. We propose a fast algorithm to compute travel-time sensitivity kernels under the assumption that the background solar medium is spherically symmetric. Kernels are typically expressed as products of Green's functions that depend upon depth, latitude and longitude. Here, we compute the spherical harmonic decomposition of the kernels and show that the integrals in latitude and longitude can be performed analytically. In particular, the integrals of the product of three associated Legendre polynomials can be computed thanks to the algorithm of Dong and Lemus (2002). The computations are fast and accurate and only require the knowledge of the Green's function where the source is at the pole. The computation time is reduced by two orders of magnitude compared to other recent computational frameworks. This new method allows for flexible and computationally efficient calculations of a large number of kernels, required in addressing key helioseismic problems. For example, the computation of all the kernels required for meridional flow inversion takes less than two hours on 100 cores.
△ Less
Submitted 16 May, 2018;
originally announced May 2018.
-
Comparison of Travel-Time and Amplitude Measurements for Deep-Focusing Time--Distance Helioseismology
Authors:
Majid Pourabdian,
Damien Fournier,
Laurent Gizon
Abstract:
The purpose of deep-focusing time--distance helioseismology is to construct seismic measurements that have a high sensitivity to the physical conditions at a desired target point in the solar interior. With this technique, pairs of points on the solar surface are chosen such that acoustic ray paths intersect at this target (focus) point. Considering acoustic waves in a homogeneous medium, we compa…
▽ More
The purpose of deep-focusing time--distance helioseismology is to construct seismic measurements that have a high sensitivity to the physical conditions at a desired target point in the solar interior. With this technique, pairs of points on the solar surface are chosen such that acoustic ray paths intersect at this target (focus) point. Considering acoustic waves in a homogeneous medium, we compare travel-time and amplitude measurements extracted from the deep-focusing cross-covariance functions. Using a single-scattering approximation, we find that the spatial sensitivity of deep-focusing travel times to sound-speed perturbations is zero at the target location and maximum in a surrounding shell. This is unlike the deep-focusing amplitude measurements, which have maximum sensitivity at the target point. We compare the signal-to-noise ratio for travel-time and amplitude measurements for different types of sound-speed perturbations, under the assumption that noise is solely due to the random excitation of the waves. We find that, for highly localized perturbations in sound speed, the signal-to-noise ratio is higher for amplitude measurements than for travel-time measurements. We conclude that amplitude measurements are a useful complement to travel-time measurements in time--distance helioseismology.
△ Less
Submitted 22 March, 2018;
originally announced April 2018.
-
Straightforward measurement of thermal properties of anisotropic materials: the case of Bi2Se3 single crystal
Authors:
Danièle Fournier,
Massimiliano Marangolo,
Mahmoud Eddrief,
Nikolai Kolesnikov,
Christian Fretigny
Abstract:
We show that by a simple two-steps measurement protocol one can extract the thermal properties of anisotropic insulator materials. We focus on Bi2Se3 single crystal, a layered crystal with individual sheets held together by Van der Waals force, presenting strong heat diffusion anisotropy. Since the shape of the sample does not allow experiments in the perpendicular direction the challenge is to me…
▽ More
We show that by a simple two-steps measurement protocol one can extract the thermal properties of anisotropic insulator materials. We focus on Bi2Se3 single crystal, a layered crystal with individual sheets held together by Van der Waals force, presenting strong heat diffusion anisotropy. Since the shape of the sample does not allow experiments in the perpendicular direction the challenge is to measure the in plane and out of plane thermal properties by in plane measurements. The optical properties of Bi2Se3 being known (opaque sample for the pump and probe beams), thermoreflectance microscopy experiments can be done on the bare substrate. In this case, the lateral heat diffusion is governed by the in plane thermal diffusivity. A 100 nm gold layer is then deposited on the sample. In this second experiment it is straightforward to demonstrate that the perpendicular thermal properties of the layer rule the lateral diffusivity. The good agreement of theoretical curves obtained by thermal models with experimental data permit us to evaluate the thermal conductivity coefficients of bulk Bi2Se3.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
-
Atmospheric radiation boundary conditions for high frequency waves in time-distance helioseismology
Authors:
Damien Fournier,
Michael Leguebe,
Chris S. Hanson,
Laurent Gizon,
Helene Barucq,
Juliette Chabassier,
Marc Durufle
Abstract:
The temporal covariance between seismic waves measured at two locations on the solar surface is the fundamental observable in time-distance helioseismology. Above the acoustic cut-off frequency ($\sim$5.3~mHz), waves are not trapped in the solar interior and the covariance function can be used to probe the upper atmosphere. We wish to implement appropriate radiative boundary conditions for computi…
▽ More
The temporal covariance between seismic waves measured at two locations on the solar surface is the fundamental observable in time-distance helioseismology. Above the acoustic cut-off frequency ($\sim$5.3~mHz), waves are not trapped in the solar interior and the covariance function can be used to probe the upper atmosphere. We wish to implement appropriate radiative boundary conditions for computing the propagation of high-frequency waves in the solar atmosphere. We consider the radiative boundary conditions recently developed by Barucq et al. (2017) for atmospheres in which sound-speed is constant and density decreases exponentially with radius. We compute the cross-covariance function using a finite element method in spherical geometry and in the frequency domain. The ratio between first- and second-skip amplitudes in the time-distance diagram is used as a diagnostic to compare boundary conditions and to compare with observations. We find that a boundary condition applied 500 km above the photosphere and derived under the approximation of small angles of incidence accurately reproduces the `infinite atmosphere' solution for high-frequency waves. When the radiative boundary condition is applied 2 Mm above the photosphere, we find that the choice of atmospheric model affects the time-distance diagram. In particular, the time-distance diagram exhibits double-ridge structure when using a VAL atmospheric model.
△ Less
Submitted 7 September, 2017;
originally announced September 2017.
-
Problems in computational helioseismology
Authors:
Laurent Gizon,
Damien Fournier,
Thorsten Hohage
Abstract:
We discuss current advances in forward and inverse modeling for local helioseismology. We report theoretical uniqueness results, in particular the Novikov-Agaltsov reconstruction algorithm, which is relevant to solving the non-linear inverse problem of time-distance helioseismology (finite amplitude pertubations to the medium). Numerical experiments were conducted to determine the number of freque…
▽ More
We discuss current advances in forward and inverse modeling for local helioseismology. We report theoretical uniqueness results, in particular the Novikov-Agaltsov reconstruction algorithm, which is relevant to solving the non-linear inverse problem of time-distance helioseismology (finite amplitude pertubations to the medium). Numerical experiments were conducted to determine the number of frequencies required to reconstruct density and sound speed in the solar interior.
△ Less
Submitted 25 July, 2017;
originally announced July 2017.
-
The amplitude of the cross-covariance function of solar oscillations as a diagnostic tool for wave attenuation and geometrical spreading
Authors:
Kaori Nagashima,
Damien Fournier,
Aaron C. Birch,
Laurent Gizon
Abstract:
Context. In time-distance helioseismology, wave travel times are measured from the two-point cross-covariance function of solar oscillations and are used to image the solar convection zone in three dimensions. There is, however, also information in the amplitude of the cross-covariance function, for example about seismic wave attenuation. Aims. Here we develop a convenient procedure to measure the…
▽ More
Context. In time-distance helioseismology, wave travel times are measured from the two-point cross-covariance function of solar oscillations and are used to image the solar convection zone in three dimensions. There is, however, also information in the amplitude of the cross-covariance function, for example about seismic wave attenuation. Aims. Here we develop a convenient procedure to measure the amplitude of the cross-covariance function of solar oscillations. Methods. In this procedure, the amplitude of the cross-covariance function is linearly related to the cross-covariance function and can be measured even for high levels of noise. Results. As an example application, we measure the amplitude perturbations of the seismic waves that propagate through the sunspot in active region NOAA 9787. We can recover the amplitude variations due to the scattering and attenuation of the waves by the sunspot and associated finite-wavelength effects. Conclusions. The proposed definition of cross-covariance amplitude is robust to noise, can be used to relate measured amplitudes to 3D perturbations in the solar interior under the Born approximation, and will provide independent information from the travel times.
△ Less
Submitted 28 December, 2016;
originally announced December 2016.
-
Computational helioseismology in the frequency domain: acoustic waves in axisymmetric solar models with flows
Authors:
Laurent Gizon,
Hélène Barucq,
Marc Duruflé,
Chris S. Hanson,
Michael Leguèbe,
Aaron C. Birch,
Juliette Chabassier,
Damien Fournier,
Thorsten Hohage,
Emanuele Papini
Abstract:
Local helioseismology has so far relied on semi-analytical methods to compute the spatial sensitivity of wave travel times to perturbations in the solar interior. These methods are cumbersome and lack flexibility. Here we propose a convenient framework for numerically solving the forward problem of time-distance helioseismology in the frequency domain. The fundamental quantity to be computed is th…
▽ More
Local helioseismology has so far relied on semi-analytical methods to compute the spatial sensitivity of wave travel times to perturbations in the solar interior. These methods are cumbersome and lack flexibility. Here we propose a convenient framework for numerically solving the forward problem of time-distance helioseismology in the frequency domain. The fundamental quantity to be computed is the cross-covariance of the seismic wavefield. We choose sources of wave excitation that enable us to relate the cross-covariance of the oscillations to the Green's function in a straightforward manner. We illustrate the method by considering the 3D acoustic wave equation in an axisymmetric reference solar model, ignoring the effects of gravity on the waves. The symmetry of the background model around the rotation axis implies that the Green's function can be written as a sum of longitudinal Fourier modes, leading to a set of independent 2D problems. We use a high-order finite-element method to solve the 2D wave equation in frequency space. The computation is `embarrassingly parallel', with each frequency and each azimuthal order solved independently on a computer cluster. We compute travel-time sensitivity kernels in spherical geometry for flows, sound speed, and density perturbations under the first Born approximation. Convergence tests show that travel times can be computed with a numerical precision better than one millisecond, as required by the most precise travel-time measurements. The method presented here is computationally efficient and will be used to interpret travel-time measurements in order to infer, e.g., the large-scale meridional flow in the solar convection zone. It allows the implementation of (full-waveform) iterative inversions, whereby the axisymmetric background model is updated at each iteration.
△ Less
Submitted 5 November, 2016;
originally announced November 2016.
-
Pinsker estimators for local helioseismology
Authors:
D. Fournier,
L. Gizon,
M. Holzke,
T. Hohage
Abstract:
A major goal of helioseismology is the three-dimensional reconstruction of the three velocity components of convective flows in the solar interior from sets of wave travel-time measurements. For small amplitude flows, the forward problem is described in good approximation by a large system of convolution equations. The input observations are highly noisy random vectors with a known dense covarianc…
▽ More
A major goal of helioseismology is the three-dimensional reconstruction of the three velocity components of convective flows in the solar interior from sets of wave travel-time measurements. For small amplitude flows, the forward problem is described in good approximation by a large system of convolution equations. The input observations are highly noisy random vectors with a known dense covariance matrix. This leads to a large statistical linear inverse problem.
Whereas for deterministic linear inverse problems several computationally efficient minimax optimal regularization methods exist, only one minimax-optimal linear estimator exists for statistical linear inverse problems: the Pinsker estimator. However, it is often computationally inefficient because it requires a singular value decomposition of the forward operator or it is not applicable because of an unknown noise covariance matrix, so it is rarely used for real-world problems. These limitations do not apply in helioseismology. We present a simplified proof of the optimality properties of the Pinsker estimator and show that it yields significantly better reconstructions than traditional inversion methods used in helioseismology, i.e.\ Regularized Least Squares (Tikhonov regularization) and SOLA (approximate inverse) methods.
Moreover, we discuss the incorporation of the mass conservation constraint in the Pinsker scheme using staggered grids. With this improvement we can reconstruct not only horizontal, but also vertical velocity components that are much smaller in amplitude.
△ Less
Submitted 3 February, 2016; v1 submitted 29 March, 2015;
originally announced March 2015.
-
Generalization of the noise model for time-distance helioseismology
Authors:
Damien Fournier,
Laurent Gizon,
Thorsten Hohage,
Aaron C. Birch
Abstract:
In time-distance helioseismology, information about the solar interior is encoded in measurements of travel times between pairs of points on the solar surface. Travel times are deduced from the cross-covariance of the random wave field. Here we consider travel times and also products of travel times as observables. They contain information about e.g. the statistical properties of convection in the…
▽ More
In time-distance helioseismology, information about the solar interior is encoded in measurements of travel times between pairs of points on the solar surface. Travel times are deduced from the cross-covariance of the random wave field. Here we consider travel times and also products of travel times as observables. They contain information about e.g. the statistical properties of convection in the Sun. The basic assumption of the model is that noise is the result of the stochastic excitation of solar waves, a random process which is stationary and Gaussian. We generalize the existing noise model (Gizon and Birch 2004) by drop** the assumption of horizontal spatial homogeneity. Using a recurrence relation, we calculate the noise covariance matrices for the moments of order 4, 6, and 8 of the observed wave field, for the moments of order 2, 3 and 4 of the cross-covariance, and for the moments of order 2, 3 and 4 of the travel times. All noise covariance matrices depend only on the expectation value of the cross-covariance of the observed wave field. For products of travel times, the noise covariance matrix consists of three terms proportional to $1/T$, $1/T^2$, and $1/T^3$, where $T$ is the duration of the observations. For typical observation times of a few hours, the term proportional to $1/T^2$ dominates and $Cov[τ_1 τ_2, τ_3 τ_4] \approx Cov[τ_1, τ_3] Cov[τ_2, τ_4] + Cov[τ_1, τ_4] Cov[τ_2, τ_3]$, where the $τ_i$ are arbitrary travel times. This result is confirmed for $p_1$ travel times by Monte Carlo simulations and comparisons with SDO/HMI observations. General and accurate formulae have been derived to model the noise covariance matrix of helioseismic travel times and products of travel times. These results could easily be generalized to other methods of local helioseismology, such as helioseismic holography and ring diagram analysis.
△ Less
Submitted 20 June, 2014;
originally announced June 2014.
-
Management of dangerous goods in container terminal with MAS model
Authors:
Mansoriya Hamidou,
Dominique Fournier,
Eric Sanlaville,
Frédéric Serin
Abstract:
In a container terminal, many operations occur within the storage area: containers import, containers export and containers shifting. All these operations require the respect of many rules and even laws in order to guarantee the port safety and to prevent risks, especially when hazardous material is concerned. In this paper, we propose a hybrid architecture, using a Cellular Automaton and a Multi-…
▽ More
In a container terminal, many operations occur within the storage area: containers import, containers export and containers shifting. All these operations require the respect of many rules and even laws in order to guarantee the port safety and to prevent risks, especially when hazardous material is concerned. In this paper, we propose a hybrid architecture, using a Cellular Automaton and a Multi-Agent System to handle the dangerous container storage problem. It is an optimization problem since the aim is to improve the container terminal configuration, that is, the way hazardous containers are dispatched through the terminal to improve its security. In our model, we consider containers as agents, in order to use a Multi-Agent System for the decision aid software, and a Cellular Automaton for modelling the terminal itself. To validate our approach many tests have been performed and the results show the relevance of our model.
△ Less
Submitted 27 March, 2014;
originally announced March 2014.
-
Application of a Hough search for continuous gravitational waves on data from the 5th LIGO science run
Authors:
The LIGO Scientific Collaboration,
The Virgo Collaboration,
J. Aasi,
J. Abadie,
B. P. Abbott,
R. Abbott,
T. Abbott,
M. R. Abernathy,
T. Accadia,
F. Acernese,
C. Adams,
T. Adams,
R. X. Adhikari,
C. Affeldt,
M. Agathos,
N. Aggarwal,
O. D. Aguiar,
P. Ajith,
B. Allen,
A. Allocca,
E. Amador Ceron,
D. Amariutei,
R. A. Anderson,
S. B. Anderson,
W. G. Anderson
, et al. (855 additional authors not shown)
Abstract:
We report on an all-sky search for periodic gravitational waves in the frequency range $\mathrm{50-1000 Hz}$ with the first derivative of frequency in the range $-8.9 \times 10^{-10}$ Hz/s to zero in two years of data collected during LIGO's fifth science run. Our results employ a Hough transform technique, introducing a $χ^2$ test and analysis of coincidences between the signal levels in years 1…
▽ More
We report on an all-sky search for periodic gravitational waves in the frequency range $\mathrm{50-1000 Hz}$ with the first derivative of frequency in the range $-8.9 \times 10^{-10}$ Hz/s to zero in two years of data collected during LIGO's fifth science run. Our results employ a Hough transform technique, introducing a $χ^2$ test and analysis of coincidences between the signal levels in years 1 and 2 of observations that offers a significant improvement in the product of strain sensitivity with compute cycles per data sample compared to previously published searches. Since our search yields no surviving candidates, we present results taking the form of frequency dependent, 95$%$ confidence upper limits on the strain amplitude $h_0$. The most stringent upper limit from year 1 is $1.0\times 10^{-24}$ in the $\mathrm{158.00-158.25 Hz}$ band. In year 2, the most stringent upper limit is $\mathrm{8.9\times10^{-25}}$ in the $\mathrm{146.50-146.75 Hz}$ band. This improved detection pipeline, which is computationally efficient by at least two orders of magnitude better than our flagship Einstein$@$Home search, will be important for "quick-look" searches in the Advanced LIGO and Virgo detector era.
△ Less
Submitted 17 March, 2014; v1 submitted 11 November, 2013;
originally announced November 2013.
-
Performance of the LHC, ATLAS and CMS in 2011
Authors:
Daniel Fournier
Abstract:
The path taken by the LHC team to reach 3.6 10$^{33}$ cm$^{-2}$ s$^{-1}$ instantaneous luminosity, and to deliver 5.6 fb$^{-1}$ per experiment is summarized. The main performances of the two experiments are highlighted, in particular the way they managed to cope with the already high level of "pile-up". Selected Standard Model and top physics results are given, and the status of the limits on the…
▽ More
The path taken by the LHC team to reach 3.6 10$^{33}$ cm$^{-2}$ s$^{-1}$ instantaneous luminosity, and to deliver 5.6 fb$^{-1}$ per experiment is summarized. The main performances of the two experiments are highlighted, in particular the way they managed to cope with the already high level of "pile-up". Selected Standard Model and top physics results are given, and the status of the limits on the Higgs boson search by each experiment is summarized. A brief overview of the search for supersymmetry and exotic phenomena is made at the end.
△ Less
Submitted 23 January, 2012;
originally announced January 2012.
-
Surface-enhanced charge-density-wave instability in underdoped Bi2201
Authors:
J. A. Rosen,
R. Comin,
G. Levy,
D. Fournier,
Z. -H. Zhu,
B. Ludbrook,
C. N. Veenstra,
A. Nicolaou,
D. Wong,
P. Dosanjh,
Y. Yoshida,
H. Eisaki,
G. R. Blake,
F. White,
T. T. M. Palstra,
R. Sutarto,
F. He,
A. Frano,
Y. Lu,
B. Keimer,
G. A. Sawatzky,
L. Petaccia,
A. Damascelli
Abstract:
Neutron and x-ray scattering experiments have provided mounting evidence for spin and charge ordering phenomena in underdoped cuprates. These range from early work on stripe correlations in Nd-LSCO to the latest discovery of charge-density-waves in YBCO. Both phenomena are characterized by a pronounced dependence on do**, temperature, and an externally applied magnetic field. Here we show that t…
▽ More
Neutron and x-ray scattering experiments have provided mounting evidence for spin and charge ordering phenomena in underdoped cuprates. These range from early work on stripe correlations in Nd-LSCO to the latest discovery of charge-density-waves in YBCO. Both phenomena are characterized by a pronounced dependence on do**, temperature, and an externally applied magnetic field. Here we show that these electron-lattice instabilities exhibit also a previously unrecognized bulk-surface dichotomy. Surface-sensitive electronic and structural probes uncover a temperature-dependent evolution of the CuO2 plane band dispersion and apparent Fermi pockets in underdoped Bi2201, which is directly associated with an hitherto-undetected strong temperature dependence of the incommensurate superstructure periodicity below 130K. In stark contrast, the structural modulation revealed by bulk-sensitive probes is temperature independent. These findings point to a surface-enhanced incipient charge-density-wave instability, driven by Fermi surface nesting. This discovery is of critical importance in the interpretation of single-particle spectroscopy data and establishes the surface of cuprates and other complex oxides as a rich playground for the study of electronically soft phases.
△ Less
Submitted 9 May, 2013; v1 submitted 11 November, 2011;
originally announced November 2011.
-
Reply to "Comment on arXiv:1012.1484v1 Structural origin of apparent Fermi surface pockets in angle-resolved photoemission of Bi_2Sr_{2-x}La_xCuO_{6+δ} by King et al."
Authors:
P. D. C. King,
J. A. Rosen,
W. Meevasana,
A. Tamai,
E. Rozbicki,
R. Comin,
G. Levy,
D. Fournier,
Y. Yoshida,
H. Eisaki,
K. M. Shen,
N. J. C. Ingle,
A. Damascelli,
F. Baumberger
Abstract:
Reply to comment by Zhou et al. (arXiv:1012.3602) on arXiv:1012.1484 / Phys. Rev. Lett. 106, 127005 (2011).
Reply to comment by Zhou et al. (arXiv:1012.3602) on arXiv:1012.1484 / Phys. Rev. Lett. 106, 127005 (2011).
△ Less
Submitted 10 May, 2011;
originally announced May 2011.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions im**ing on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
Structural origin of apparent Fermi surface pockets in angle-resolved photoemission of Bi$_2$Sr$_{2-x}$La$_x$CuO$_{6+δ}$
Authors:
P. D. C. King,
J. A. Rosen,
W. Meevasana,
A. Tamai,
E. Rozbicki,
R. Comin,
G. Levy,
D. Fournier,
Y. Yoshida,
H. Eisaki,
K. M. Shen,
N. J. C. Ingle,
A. Damascelli,
F. Baumberger
Abstract:
We observe apparent hole pockets in the Fermi surfaces of single-layer Bi-based cuprate superconductors from angle-resolved photoemission (ARPES). From detailed low-energy electron diffraction measurements and an analysis of the ARPES polarization-dependence, we show that these pockets are not intrinsic, but arise from multiple overlap** superstructure replicas of the main and shadow bands. We f…
▽ More
We observe apparent hole pockets in the Fermi surfaces of single-layer Bi-based cuprate superconductors from angle-resolved photoemission (ARPES). From detailed low-energy electron diffraction measurements and an analysis of the ARPES polarization-dependence, we show that these pockets are not intrinsic, but arise from multiple overlap** superstructure replicas of the main and shadow bands. We further demonstrate that the hole pockets reported recently from ARPES [Meng et al, Nature 462, 335 (2009)] have a similar structural origin, and are inconsistent with an intrinsic hole pocket associated with the electronic structure of a doped CuO$_2$ plane. The nature of the Fermi surface topology in the enigmatic pseudogap phase therefore remains an open question.
△ Less
Submitted 7 December, 2010;
originally announced December 2010.
-
Loss of nodal quasiparticle integrity in underdoped YBa2Cu3O6+x
Authors:
D. Fournier,
G. Levy,
Y. Pennec,
J. L. McChesney,
A. Bostwick,
E. Rotenberg,
R. Liang,
W. N. Hardy,
D. A. Bonn,
I. S. Elfimov,
A. Damascelli
Abstract:
Arguably the most intriguing aspect of the physics of cuprates is the close proximity between the record high-Tc superconductivity (HTSC) and the antiferromagnetic charge-transfer insulating state driven by Mott-like electron correlations. These are responsible for the intimate connection between high and low-energy scale physics, and their key role in the mechanism of HTSC was conjectured very ea…
▽ More
Arguably the most intriguing aspect of the physics of cuprates is the close proximity between the record high-Tc superconductivity (HTSC) and the antiferromagnetic charge-transfer insulating state driven by Mott-like electron correlations. These are responsible for the intimate connection between high and low-energy scale physics, and their key role in the mechanism of HTSC was conjectured very early on. More recently, the detection of quantum oscillations in high-magnetic field experiments on YBa2Cu3O6+x (YBCO) has suggested the existence of a Fermi surface of well-defined quasiparticles in underdoped cuprates, lending support to the alternative proposal that HTSC might emerge from a Fermi liquid across the whole cuprate phase diagram. Discriminating between these orthogonal scenarios hinges on the quantitative determination of the elusive quasiparticle weight Z, over a wide range of hole-do** p. By means of angle-resolved photoemission spectroscopy (ARPES) on in situ doped YBCO, and following the evolution of bilayer band-splitting, we show that the overdoped metal electronic structure (0.25<p<0.37) is in remarkable agreement with density functional theory and the Z=2p/(p+1) mean-field prediction. Below p~0.10-0.15, we observe the vanishing of the nodal quasiparticle weight Z_N; this marks a clear departure from Fermi liquid behaviour and -- consistent with dynamical mean-field theory -- is even a more rapid crossover to the Mott physics than expected for the doped resonating valence bond (RVB) spin liquid.
△ Less
Submitted 22 July, 2010;
originally announced July 2010.
-
Mixed pairing symmetry in κ-(BEDT-TTF)_2 X organic superconductors from ultrasonic velocity measurements
Authors:
Maxime Dion,
David Fournier,
Mario Poirier,
Kim D. Truong,
A. -M. S. Tremblay
Abstract:
Discontinuities in elastic constants are detected at the superconducting transition of layered organic conductors κ-(BEDT-TTF)_{2}X by longitudinal and transverse ultrasonic velocity measurements. Symmetry arguments show that discontinuities in shear elastic constants can be explained in the orthorhombic compound only if the superconducting order parameter has a mixed character that can be of tw…
▽ More
Discontinuities in elastic constants are detected at the superconducting transition of layered organic conductors κ-(BEDT-TTF)_{2}X by longitudinal and transverse ultrasonic velocity measurements. Symmetry arguments show that discontinuities in shear elastic constants can be explained in the orthorhombic compound only if the superconducting order parameter has a mixed character that can be of two types, either A_{1g}+B_{1g} or B_{2g}+B_{3g} in the classification of irreducible representations of the orthorhombic point group D_{2h}. Consistency with other measurements suggests that the A_{1g}+B_{1g} (d_{xy}+d_{z(x+y)}) possibility is realized. Such clear symmetry-imposed signatures of mixed order parameters have not been observed in other superconducting compounds.
△ Less
Submitted 15 May, 2009;
originally announced May 2009.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
Probing thermal waves on the free surface of various media: Surface Fluctuation Specular Reflection Spectroscopy
Authors:
Astrid Tay,
Caroline Thibierge,
Danièle Fournier,
Christian Frétigny,
François Lequeux,
Cécile Monteux,
Jean-Paul Roger,
Laurence Talini
Abstract:
Thermal motion gives rise to fluctuations in free surfaces; the propagation of the thermally excited waves on such surfaces depends on the mechanical properties of the medium. Their measurement can therefore provide information on those properties. We have developed an optical tool to probe the thermally excited waves on free surfaces: Surface Fluctuation Specular Reflection (SFSR) spectroscopy.…
▽ More
Thermal motion gives rise to fluctuations in free surfaces; the propagation of the thermally excited waves on such surfaces depends on the mechanical properties of the medium. Their measurement can therefore provide information on those properties. We have developed an optical tool to probe the thermally excited waves on free surfaces: Surface Fluctuation Specular Reflection (SFSR) spectroscopy. It consists in measuring the fluctuations in the position of a laser beam, which is specularly reflected onto the free surface of a medium, and is therefore sensitive to the roughness of that surface. We show how the measured signal is related to the medium properties. We also present measurements performed on Newtonian liquids as well as on a viscoelastic solid; we show that, in all cases, there is a very good agreement between experimental and computed spectra. SFSR thus applies to a broad range of materials. It moreover offers a very good temporal resolution and should provide a useful tool for dynamical measurements on complex fluids.
△ Less
Submitted 16 June, 2008;
originally announced June 2008.
-
Response Uniformity of the ATLAS Liquid Argon Electromagnetic Calorimeter
Authors:
M. Aharrouche,
J. Colas,
L. Di Ciaccio,
M. El Kacimi,
O. Gaumer,
M. Gouanere,
D. Goujdami,
R. Lafaye,
S. Laplace,
C. Le Maner,
L. Neukermans,
P. Perrodo,
L. Poggioli,
D. Prieur,
H. Przysiezniak,
G. Sauvage,
I. Wingerter-Seez,
R. Zitoun,
F. Lanni,
L. Lu,
H. Ma,
S. Rajago palan,
H. Takai,
A. Belymam,
D. Benchekroun
, et al. (77 additional authors not shown)
Abstract:
The construction of the ATLAS electromagnetic liquid argon calorimeter modules is completed and all the modules are assembled and inserted in the cryostats. During the production period four barrel and three endcap modules were exposed to test beams in order to assess their performance, ascertain the production quality and reproducibility, and to scrutinize the complete energy reconstruction cha…
▽ More
The construction of the ATLAS electromagnetic liquid argon calorimeter modules is completed and all the modules are assembled and inserted in the cryostats. During the production period four barrel and three endcap modules were exposed to test beams in order to assess their performance, ascertain the production quality and reproducibility, and to scrutinize the complete energy reconstruction chain from the readout and calibration electronics to the signal and energy reconstruction. It was also possible to check the full Monte Carlo simulation of the calorimeter. The analysis of the uniformity, resolution and extraction of constant term is presented. Typical non-uniformities of 0.5% and typical global constant terms of 0.6% are measured for the barrel and end-cap modules.
△ Less
Submitted 7 September, 2007;
originally announced September 2007.
-
Competition between magnetism and superconductivity in the organic metal $κ$-[BEDT-TTF]$_2$Cu[N(CN)$_2$]Br
Authors:
David Fournier,
Mario Poirier,
Kim Doan Truong
Abstract:
Ultrasonic velocity and attenuation measurements on the quasi-two-dimensional organic conductor $κ$-[BEDT-TTF]$_2$Cu[N(CN)$_2$]Br give the first determination of the coexistence zone of the antiferromagnetic and superconducting phases which extends deep in the metallic part of the pressure-temperature phase diagram of these salts. This zone is identified from a precise control of the ordering in…
▽ More
Ultrasonic velocity and attenuation measurements on the quasi-two-dimensional organic conductor $κ$-[BEDT-TTF]$_2$Cu[N(CN)$_2$]Br give the first determination of the coexistence zone of the antiferromagnetic and superconducting phases which extends deep in the metallic part of the pressure-temperature phase diagram of these salts. This zone is identified from a precise control of the ordering in ethylene end groups which acts as an internal pressure. The two phases are found to compete whereas superconducting fluctuations begin to contribute to the attenuation at 15 K, namely at the onset of magnetic order that is well above the superconducting transition temperature $T_c$ = 11.9 K. Finally, the temperature profile of sound attenuation for both longitudinal and transverse phonon polarizations is found to be inconsistent with a conventional \textit{s}-wave order parameter.
△ Less
Submitted 16 December, 2006;
originally announced December 2006.
-
Luminosity measurement at ATLAS - development, construction and test of scintillating fibre prototype detectors
Authors:
S. Ask,
P. Barillon,
A. Braem,
C. Cheiklali,
I. Efthymiopoulos,
D. Fournier,
C. de La Taille,
B. Di Girolamo,
P. Grafstroem,
C. Joram,
M. Haguenauer,
V. Hedberg,
B. Lavigne,
A. Maio,
A. Mapelli,
U. Mjoernmark,
P. Puzo,
M. Rijssenbeek,
J. Santos,
J. G. Saraiva,
H. Stenzel,
M. Thioye,
E. Valladolid,
V. Vorobel
Abstract:
We are reporting about a scintillating fibre tracker which is proposed for the precise determination of the absolute luminosity of the CERN LHC at interaction point 1 where the ATLAS experiment is located. The detector needs to track protons elastically scattered under micro-rad angles in direct vicinity to the LHC beam. It is based on square shaped scintillating plastic fibres read out by multi…
▽ More
We are reporting about a scintillating fibre tracker which is proposed for the precise determination of the absolute luminosity of the CERN LHC at interaction point 1 where the ATLAS experiment is located. The detector needs to track protons elastically scattered under micro-rad angles in direct vicinity to the LHC beam. It is based on square shaped scintillating plastic fibres read out by multi-anode photomultiplier tubes and is housed in Roman Pots. We describe the design and construction of prototype detectors and the results of a beam test experiment at DESY. The excellent detector performance established in this test validates the detector design and supports the feasibility of the proposed challenging method of luminosity measurement.
△ Less
Submitted 16 May, 2006;
originally announced May 2006.
-
Mott Transition, Compressibility Divergence and P-T Phase Diagram of Layered Organic Superconductors: An Ultrasonic Investigation
Authors:
D. Fournier,
M. Poirier,
M. Castonguay,
K. Truong
Abstract:
The phase diagram of the organic superconductor $κ$-(BEDT-TTF)$_2$Cu[N(CN)$_2$Cl has been investigated by ultrasonic velocity measurements under helium gas pressure. Different phase transitions were identified trough several elastic anomalies characterized from isobaric and isothermal sweeps. Our data reveal two crossover lines that end on the critical point terminating the first-order Mott tran…
▽ More
The phase diagram of the organic superconductor $κ$-(BEDT-TTF)$_2$Cu[N(CN)$_2$Cl has been investigated by ultrasonic velocity measurements under helium gas pressure. Different phase transitions were identified trough several elastic anomalies characterized from isobaric and isothermal sweeps. Our data reveal two crossover lines that end on the critical point terminating the first-order Mott transition line. When the critical point is approached along these lines, we observe a dramatic softening of the velocity which is consistent with a diverging compressibility of the electronic degrees of freedom.
△ Less
Submitted 23 September, 2002;
originally announced September 2002.
-
Periodic vacuum and particles in two dimensions
Authors:
Marianne Dufour Fournier,
Janos Polonyi
Abstract:
Different dynamical symmetry breaking patterns are explored for the two dimensional phi4 model with higher order derivative terms. The one-loop saddle point expansion predicts a rather involved phase structure and a new Gaussian critical line. This vacuum structure is corroborated by the Monte Carlo method, as well. Analogies with the structure of solids, the density wave phases and the effects…
▽ More
Different dynamical symmetry breaking patterns are explored for the two dimensional phi4 model with higher order derivative terms. The one-loop saddle point expansion predicts a rather involved phase structure and a new Gaussian critical line. This vacuum structure is corroborated by the Monte Carlo method, as well. Analogies with the structure of solids, the density wave phases and the effects of the quenched impurities are mentioned. The unitarity of the time evolution operator in real time is established by means of the reflection positivity.
△ Less
Submitted 5 December, 1999; v1 submitted 11 March, 1999;
originally announced March 1999.
-
Determination of the branching ratios $Γ(K_L \to 3 π^0) / Γ(K_L \to π^+ π^- π^0)$ and $Γ(K_L \to 3 π^0) / Γ(K_L \to πe ν)$
Authors:
A. Kreutz,
M. Holder,
M. Rost,
R. Werthenbach,
K. J. Peach,
H. Blümer,
R. Heinz,
K. Kleinknecht,
P. Mayer,
B. Panzer,
B. Renk,
H. Rohrer,
A. Wagner,
E. Augé,
D. Fournier,
L. Iconomidou-Fayard,
O. Perdereau,
A. C. Schaffer,
L. Serin,
L. Bertanza,
A. Bigi,
P. Calafiura,
M. Calvetti,
R. Carosi,
R. Casali
, et al. (5 additional authors not shown)
Abstract:
Improved branching ratios were measured for the $K_L \to 3 π^0 $ decay in a neutral beam at the CERN SPS with the NA31 detector: $Γ(K_L \to 3 π^0) / Γ(K_L \to π^+ π^- π^0) = 1.611 \pm 0.037$ and $Γ(K_L \to 3 π^0) / Γ(K_L \to πe ν) = 0.545 \pm 0.010$.
From the first number an upper limit for $ΔI =5/2$ and $ΔI = 7/2 $ transitions in neutral kaon decay is derived. Using older results for the Ke3/…
▽ More
Improved branching ratios were measured for the $K_L \to 3 π^0 $ decay in a neutral beam at the CERN SPS with the NA31 detector: $Γ(K_L \to 3 π^0) / Γ(K_L \to π^+ π^- π^0) = 1.611 \pm 0.037$ and $Γ(K_L \to 3 π^0) / Γ(K_L \to πe ν) = 0.545 \pm 0.010$.
From the first number an upper limit for $ΔI =5/2$ and $ΔI = 7/2 $ transitions in neutral kaon decay is derived. Using older results for the Ke3/K$μ$3 fraction, the 3$π^0$ branching ratio is found to be $Γ(K_L \to 3 π^0 )/ Γ_{tot} = (0.211 \pm 0.003)$, about a factor three more precise than from previous experiments.
△ Less
Submitted 21 September, 1994;
originally announced September 1994.