Showing 1–43 of 43 results for author: Fortier, T

Optical and microwave metrology at the 10-18 level with an Er/Yb:glass frequency comb

Authors: Nicholas V. Nardelli, Holly Leopardi, Thomas R. Schibli, Tara M. Fortier

Abstract: Optical frequency combs are an essential tool for precision metrology experiments ranging in application from remote spectroscopic sensing of trace gases to the characterization and comparison of optical atomic clocks for precision time-kee** and searches for physics beyond the standard model. Here we describe the architecture and fully characterize a telecom-band, self-modelocking frequency com… ▽ More Optical frequency combs are an essential tool for precision metrology experiments ranging in application from remote spectroscopic sensing of trace gases to the characterization and comparison of optical atomic clocks for precision time-kee** and searches for physics beyond the standard model. Here we describe the architecture and fully characterize a telecom-band, self-modelocking frequency comb based on a free-space laser with an Er/Yb co-doped glass gain medium. The laser provides a robust and cost-effective alternative to Er:fiber laser based frequency combs, while offering stability and noise performance similar to Ti:sapphire laser systems. Finally, we demonstrate the Er/Yb:glass frequency comb's utility in high-stability frequency synthesis using two ultra-stable optical references at 1157 nm and 1070 nm and in low-noise photonic microwave generation by dividing these references to the microwave domain. △ Less

Submitted 26 August, 2022; originally announced August 2022.

10 GHz Generation with Ultra-Low Phase Noise via the Transfer Oscillator Technique

Authors: Nicholas V. Nardelli, Tara M. Fortier, Marco Pomponio, Esther Baumann, Craig Nelson, Thomas R. Schibli, Archita Hati

Abstract: Coherent frequency division of high-stability optical sources permits the extraction of microwave signals with ultra-low phase noise, enabling their application to systems with stringent timing precision. To date, the highest performance systems have required tight phase stabilization of laboratory grade optical frequency combs to Fabry-Perot optical reference cavities for faithful optical-to-micr… ▽ More Coherent frequency division of high-stability optical sources permits the extraction of microwave signals with ultra-low phase noise, enabling their application to systems with stringent timing precision. To date, the highest performance systems have required tight phase stabilization of laboratory grade optical frequency combs to Fabry-Perot optical reference cavities for faithful optical-to-microwave frequency division. This requirement limits the technology to highly-controlled laboratory environments. Here, we employ a transfer oscillator technique, which employs digital and RF analog electronics to coherently suppress additive optical frequency comb noise. This relaxes the stabilization requirements and allows for the extraction of multiple independent microwave outputs from a single comb, while at the same time, permitting low-noise microwave generation from combs with higher noise profiles. Using this method we transferred the phase stability of two high-Finesse optical sources at 1157 nm and 1070 nm to two independent 10 GHz signals using a single frequency comb. We demonstrated absolute phase noise below -106 dBc/Hz at 1-Hz from carrier with corresponding 1 second fractional frequency instability below $2\times10^{-15}$. Finally, the latter phase noise levels were attainable for comb linewidths broadened up to 2 MHz, demonstrating the potential for out-of lab use with low SWaP lasers. △ Less

Submitted 1 October, 2021; originally announced October 2021.

Optical coherence between atomic species at the second scale: improved clock comparisons via differential spectroscopy

Authors: May E. Kim, William F. McGrew, Nicholas V. Nardelli, Ethan R. Clements, Youssef S. Hassan, Xiaogang Zhang, Jose L. Valencia, Holly Leopardi, David B. Hume, Tara M. Fortier, Andrw D. Ludlow, David R. Leibrandt

Abstract: Comparisons of high-accuracy optical atomic clocks \cite{Ludlow2015} are essential for precision tests of fundamental physics \cite{Safronova2018}, relativistic geodesy \cite{McGrew2018, Grotti2018, Delva2019}, and the anticipated redefinition of the SI second \cite{Riehle2018}. The scientific reach of these applications is restricted by the statistical precision of interspecies comparison measure… ▽ More Comparisons of high-accuracy optical atomic clocks \cite{Ludlow2015} are essential for precision tests of fundamental physics \cite{Safronova2018}, relativistic geodesy \cite{McGrew2018, Grotti2018, Delva2019}, and the anticipated redefinition of the SI second \cite{Riehle2018}. The scientific reach of these applications is restricted by the statistical precision of interspecies comparison measurements. The instability of individual clocks is limited by the finite coherence time of the optical local oscillator (OLO), which bounds the maximum atomic interrogation time. In this letter, we experimentally demonstrate differential spectroscopy \cite{Hume2016}, a comparison protocol that enables interrogating beyond the OLO coherence time. By phase-coherently linking a zero-dead-time (ZDT) \cite{Schioppo2017} Yb optical lattice clock with an Al$^+$ single-ion clock via an optical frequency comb and performing synchronised Ramsey spectroscopy, we show an improvement in comparison instability relative to our previous result \cite{network2020frequency} of nearly an order of magnitude. To our knowledge, this result represents the most stable interspecies clock comparison to date. △ Less

Submitted 24 November, 2021; v1 submitted 20 September, 2021; originally announced September 2021.

High-performance, compact optical standard

Authors: Zachary L. Newman, Vincent Maurice, Connor Fredrick, Tara Fortier, Holly Leopardi, Leo Hollberg, Scott A. Diddams, John Kitching, Matthew T. Hummon

Abstract: We describe a high-performance, compact optical frequency standard based on a microfabricated Rb vapor cell and a low-noise, external cavity diode laser operating on the Rb two-photon transition at 778 nm. The optical standard achieves an instability of 1.8x10$^{-13}$/$\sqrtτ$ for times less than 100 s and a flicker noise floor of 1x10$^{-14}$ out to 6000 s. At long integration times, the instabil… ▽ More We describe a high-performance, compact optical frequency standard based on a microfabricated Rb vapor cell and a low-noise, external cavity diode laser operating on the Rb two-photon transition at 778 nm. The optical standard achieves an instability of 1.8x10$^{-13}$/$\sqrtτ$ for times less than 100 s and a flicker noise floor of 1x10$^{-14}$ out to 6000 s. At long integration times, the instability is limited by variations in optical probe power and the AC Stark shift. The retrace was measured to 5.7x10$^{-13}$ after 30 hours of dormancy. Such a simple, yet high-performance optical standard could be suitable as an accurate realization of the SI meter or, if coupled with an optical frequency comb, as a compact atomic clock comparable to a hydrogen maser. △ Less

Submitted 2 May, 2021; originally announced May 2021.

Comments: 5 pages, 5 figures

Optical Atomic Clock Comparison through Turbulent Air

Authors: Martha I. Bodine, Jean-Daniel Deschênes, Isaac H. Khader, William C. Swann, Holly Leopardi, Kyle Beloy, Tobias Bothwell, Samuel M. Brewer, Sarah L. Bromley, Jwo-Sy Chen, Scott A. Diddams, Robert J. Fasano, Tara M. Fortier, Youssef S. Hassan, David B. Hume, Dhruv Kedar, Colin J. Kennedy, Amanda Koepke, David R. Leibrandt, Andrew D. Ludlow, William F. McGrew, William R. Milner, Daniele Nicolodi, Eric Oelker, Thomas E. Parker , et al. (10 additional authors not shown)

Abstract: We use frequency comb-based optical two-way time-frequency transfer (O-TWTFT) to measure the optical frequency ratio of state-of-the-art ytterbium and strontium optical atomic clocks separated by a 1.5 km open-air link. Our free-space measurement is compared to a simultaneous measurement acquired via a noise-cancelled fiber link. Despite non-stationary, ps-level time-of-flight variations in the fr… ▽ More We use frequency comb-based optical two-way time-frequency transfer (O-TWTFT) to measure the optical frequency ratio of state-of-the-art ytterbium and strontium optical atomic clocks separated by a 1.5 km open-air link. Our free-space measurement is compared to a simultaneous measurement acquired via a noise-cancelled fiber link. Despite non-stationary, ps-level time-of-flight variations in the free-space link, ratio measurements obtained from the two links, averaged over 30.5 hours across six days, agree to $6\times10^{-19}$, showing that O-TWTFT can support free-space atomic clock comparisons below the $10^{-18}$ level. △ Less

Submitted 11 September, 2020; v1 submitted 1 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. Research 2, 033395 (2020)

Frequency Ratio Measurements with 18-digit Accuracy Using a Network of Optical Clocks

Authors: Boulder Atomic Clock Optical Network, Collaboration, :, Kyle Beloy, Martha I. Bodine, Tobias Bothwell, Samuel M. Brewer, Sarah L. Bromley, Jwo-Sy Chen, Jean-Daniel Deschênes, Scott A. Diddams, Robert J. Fasano, Tara M. Fortier, Youssef S. Hassan, David B. Hume, Dhruv Kedar, Colin J. Kennedy, Isaac Khader, Amanda Koepke, David R. Leibrandt, Holly Leopardi, Andrew D. Ludlow, William F. McGrew, William R. Milner, Nathan R. Newbury , et al. (13 additional authors not shown)

Abstract: Atomic clocks occupy a unique position in measurement science, exhibiting higher accuracy than any other measurement standard and underpinning six out of seven base units in the SI system. By exploiting higher resonance frequencies, optical atomic clocks now achieve greater stability and lower frequency uncertainty than existing primary standards. Here, we report frequency ratios of the $^{27}$Al… ▽ More Atomic clocks occupy a unique position in measurement science, exhibiting higher accuracy than any other measurement standard and underpinning six out of seven base units in the SI system. By exploiting higher resonance frequencies, optical atomic clocks now achieve greater stability and lower frequency uncertainty than existing primary standards. Here, we report frequency ratios of the $^{27}$Al$^+$, $^{171}$Yb and $^{87}$Sr optical clocks in Boulder, Colorado, measured across an optical network spanned by both fiber and free-space links. These ratios have been evaluated with measurement uncertainties between $6\times10^{-18}$ and $8\times10^{-18}$, making them the most accurate reported measurements of frequency ratios to date. This represents a critical step towards redefinition of the SI second and future applications such as relativistic geodesy and tests of fundamental physics. △ Less

Submitted 29 May, 2020; originally announced May 2020.

Comments: 51 pages, 12 figures, 6 tables

Coherent Optical Clock Down-Conversion for Microwave Frequencies with 10-18 Instability

Authors: Takuma Nakamura, Josue Davila-Rodriguez, Holly Leopardi, Jeff A. Sherman, Tara M. Fortier, Xiaojun Xie, Joe C. Campbell, William F. McGrew, Xiaogang Zhang, Youssef S. Hassan, Daniele Nicolodi, Kyle Beloy, Andrew D. Ludlow, Scott A. Diddams, Franklyn Quinlan

Abstract: Optical atomic clocks are poised to redefine the SI second, thanks to stability and accuracy more than one hundred times better than the current microwave atomic clock standard. However, the best optical clocks have not seen their performance transferred to the electronic domain, where radar, navigation, communications, and fundamental research rely on less stable microwave sources. By comparing t… ▽ More Optical atomic clocks are poised to redefine the SI second, thanks to stability and accuracy more than one hundred times better than the current microwave atomic clock standard. However, the best optical clocks have not seen their performance transferred to the electronic domain, where radar, navigation, communications, and fundamental research rely on less stable microwave sources. By comparing two independent optical-to-electronic signal generators, we demonstrate a 10 GHz microwave signal with phase that exactly tracks that of the optical clock phase from which it is derived, yielding an absolute fractional frequency instability of 1*10-18 in the electronic domain. Such faithful reproduction of the optical clock phase expands the opportunities for optical clocks both technologically and scientifically for time-dissemination, navigation, and long-baseline interferometric imaging. △ Less

Submitted 9 March, 2020; v1 submitted 5 March, 2020; originally announced March 2020.

Comments: 19 page, 10 figures (including Supplementary Text)

Precision frequency-comb terahertz spectroscopy on pure quantum states of a single molecular ion

Authors: Chin-wen Chou, Alejandra L. Collopy, Christoph Kurz, Yiheng Lin, Michael E. Harding, Philipp N. Plessow, Tara Fortier, Scott Diddams, Dietrich Leibfried, David. R. Leibrandt

Abstract: Spectroscopy is a powerful tool for studying molecules and is commonly performed on large thermal molecular ensembles that are perturbed by motional shifts and interactions with the environment and one another, resulting in convoluted spectra and limited resolution. Here, we use generally applicable quantum-logic techniques to prepare a trapped molecular ion in a single quantum state, drive terahe… ▽ More Spectroscopy is a powerful tool for studying molecules and is commonly performed on large thermal molecular ensembles that are perturbed by motional shifts and interactions with the environment and one another, resulting in convoluted spectra and limited resolution. Here, we use generally applicable quantum-logic techniques to prepare a trapped molecular ion in a single quantum state, drive terahertz rotational transitions with an optical frequency comb, and read out the final state non-destructively, leaving the molecule ready for further manipulation. We resolve rotational transitions to 11 significant digits and derive the rotational constant of CaH+ to be B_R = 142501777.9(1.7) kHz. Our approach suits a wide range of molecular ions, including polyatomics and species relevant for tests of fundamental physics, chemistry, and astrophysics. △ Less

Submitted 28 November, 2019; originally announced November 2019.

Comments: 25 pages, 4 figures, 6 tables

20 years of developments in optical frequency comb technology and applications

Authors: Tara Fortier, Esther Baumann

Abstract: Optical frequency combs were developed nearly two decades ago to support the world's most precise atomic clocks. Acting as precision optical synthesizers, frequency combs enable the precise transfer of phase and frequency information from a high-stability reference to hundreds of thousands of tones in the optical domain. This versatility, coupled with near-continuous spectroscopic coverage from th… ▽ More Optical frequency combs were developed nearly two decades ago to support the world's most precise atomic clocks. Acting as precision optical synthesizers, frequency combs enable the precise transfer of phase and frequency information from a high-stability reference to hundreds of thousands of tones in the optical domain. This versatility, coupled with near-continuous spectroscopic coverage from the terahertz to the extreme ultra-violet, has enabled precision measurement capabilities in both fundamental and applied contexts. This review takes a tutorial approach to illustrate how 20 years of source development and technology has facilitated the journey of optical frequency combs from the lab into the field. △ Less

Submitted 11 September, 2019; originally announced September 2019.

Journal ref: Commun Phys 2, 153 (2019)

Ramsey-Bordé matter-wave interferometry for laser frequency stabilization at $10^{-16}$ frequency instability and below

Authors: Judith Olson, Richard W. Fox, Tara M. Fortier, Todd F. Sheerin, Roger C. Brown, Holly Leopardi, Richard E. Stoner, Chris W. Oates, Andrew D. Ludlow

Abstract: We demonstrate Ramsey-Bordé (RB) atom interferometry for high performance laser stabilization with fractional frequency instability $<2 \times 10^{-16}$ for timescales between 10 and 1000s. The RB spectroscopy laser interrogates two counterpropagating $^{40}$Ca beams on the $^1$S$_0$ -- $^3$P$_1$ transition at 657 nm, yielding 1.6 kHz linewidth interference fringes. Fluorescence detection of the e… ▽ More We demonstrate Ramsey-Bordé (RB) atom interferometry for high performance laser stabilization with fractional frequency instability $<2 \times 10^{-16}$ for timescales between 10 and 1000s. The RB spectroscopy laser interrogates two counterpropagating $^{40}$Ca beams on the $^1$S$_0$ -- $^3$P$_1$ transition at 657 nm, yielding 1.6 kHz linewidth interference fringes. Fluorescence detection of the excited state population is performed on the (4s4p) $^3$P$_1$ -- (4p$^2$) $^3$P$_0$ transition at 431 nm. Minimal thermal shielding and no vibration isolation are used. These stability results surpass performance from other thermal atomic or molecular systems by one to two orders of magnitude, and further improvements look feasible. △ Less

Submitted 15 July, 2019; originally announced July 2019.

Demonstration of a time scale based on a stable optical carrier

Authors: William R. Milner, John M. Robinson, Colin J. Kennedy, Tobias Bothwell, Dhruv Kedar, Dan G. Matei, Thomas Legero, Uwe Sterr, Fritz Riehle, Holly Leopardi, Tara M. Fortier, Jeffrey A. Sherman, Judah Levine, Jian Yao, Jun Ye, Eric Oelker

Abstract: We demonstrate a time scale based on a phase stable optical carrier that accumulates an estimated time error of $48\pm94$ ps over 34 days of operation. This all-optical time scale is formed with a cryogenic silicon cavity exhibiting improved long-term stability and an accurate $^{87}$Sr lattice clock. We show that this new time scale architecture outperforms existing microwave time scales, even wh… ▽ More We demonstrate a time scale based on a phase stable optical carrier that accumulates an estimated time error of $48\pm94$ ps over 34 days of operation. This all-optical time scale is formed with a cryogenic silicon cavity exhibiting improved long-term stability and an accurate $^{87}$Sr lattice clock. We show that this new time scale architecture outperforms existing microwave time scales, even when they are steered to optical frequency standards. Our analysis indicates that this time scale is capable of reaching a stability below $1\times10^{-17}$ after a few months of averaging, making timekee** at the $10^{-18}$ level a realistic prospect. △ Less

Submitted 6 July, 2019; originally announced July 2019.

Comments: 13 pages, 12 Figures

Journal ref: Phys. Rev. Lett. 123, 173201 (2019)

Measurements of $^{27}$Al$^{+}$ and $^{25}$Mg$^{+}$ magnetic constants for improved ion clock accuracy

Authors: S. M. Brewer, J. -S. Chen, K. Beloy, A. M. Hankin, E. R. Clements, C. W. Chou, W. F. McGrew, X. Zhang, R. J. Fasano, D. Nicolodi, H. Leopardi, T. M. Fortier, S. A. Diddams, A. D. Ludlow, D. J. Wineland, D. R. Leibrandt, D. B. Hume

Abstract: We have measured the quadratic Zeeman coefficient for the ${^{1}S_{0} \leftrightarrow {^{3}P_{0}}}$ optical clock transition in $^{27}$Al$^{+}$, $C_{2}=-71.944(24)$~MHz/T$^{2}$, and the unperturbed hyperfine splitting of the $^{25}$Mg$^{+}$ $^{2}S_{1/2}$ ground electronic state, $ΔW / h = 1~788~762~752.85(13)$~Hz, with improved uncertainties. Both constants are relevant to the evaluation of the… ▽ More We have measured the quadratic Zeeman coefficient for the ${^{1}S_{0} \leftrightarrow {^{3}P_{0}}}$ optical clock transition in $^{27}$Al$^{+}$, $C_{2}=-71.944(24)$~MHz/T$^{2}$, and the unperturbed hyperfine splitting of the $^{25}$Mg$^{+}$ $^{2}S_{1/2}$ ground electronic state, $ΔW / h = 1~788~762~752.85(13)$~Hz, with improved uncertainties. Both constants are relevant to the evaluation of the $^{27}$Al$^{+}$ quantum-logic clock systematic uncertainty. The measurement of $C_{2}$ is in agreement with a previous measurement and a new calculation at the $1~σ$ level. The measurement of $ΔW$ is in good agreement with a recent measurement and differs from a previously published result by approximately $2σ$. With the improved value for $ΔW$, we deduce an improved value for the nuclear-to-electronic g-factor ratio $g_{I}/g_{J} = 9.299 ~308 ~313(60) \times 10^{-5}$ and the nuclear g-factor for the $^{25}$Mg nucleus $g_{I} = 1.861 ~957 ~82(28) \times 10^{-4}$. Using the values of $C_{2}$ and $ΔW$ presented here, we derive a quadratic Zeeman shift of the $^{27}$Al$^{+}$ quantum-logic clock of $Δν/ ν= -(9241.8 \pm 3.7) \times 10^{-19}$, for a bias magnetic field of $B \approx 0.12$~mT. △ Less

Submitted 22 May, 2019; v1 submitted 11 March, 2019; originally announced March 2019.

Comments: 7 pages, 5 figures, updated

Journal ref: Phys. Rev. A 100, 013409 (2019)

Optical-Clock-Based Time Scale

Authors: Jian Yao, Jeff A. Sherman, Tara Fortier, Holly Leopardi, Thomas Parker, William McGrew, Xiaogang Zhang, Daniele Nicolodi, Robert Fasano, Stefan Schäffer, Kyle Beloy, Joshua Savory, Stefania Romisch, Chris Oates, Scott Diddams, Andrew Ludlow, Judah Levine

Abstract: A time scale is a procedure for accurately and continuously marking the passage of time. It is exemplified by Coordinated Universal Time (UTC), and provides the backbone for critical navigation tools such as the Global Positioning System (GPS). Present time scales employ microwave atomic clocks, whose attributes can be combined and averaged in a manner such that the composite is more stable, accur… ▽ More A time scale is a procedure for accurately and continuously marking the passage of time. It is exemplified by Coordinated Universal Time (UTC), and provides the backbone for critical navigation tools such as the Global Positioning System (GPS). Present time scales employ microwave atomic clocks, whose attributes can be combined and averaged in a manner such that the composite is more stable, accurate, and reliable than the output of any individual clock. Over the past decade, clocks operating at optical frequencies have been introduced which are orders of magnitude more stable than any microwave clock. However, in spite of their great potential, these optical clocks cannot be operated continuously, which makes their use in a time scale problematic. In this paper, we report the development of a hybrid microwave-optical time scale, which only requires the optical clock to run intermittently while relying upon the ensemble of microwave clocks to serve as the flywheel oscillator. The benefit of using clock ensemble as the flywheel oscillator, instead of a single clock, can be understood by the Dick-effect limit. This time scale demonstrates for the first time sub-nanosecond accuracy for a few months, attaining a fractional frequency uncertainty of 1.45*10-16 at 30 days and reaching the 10-17 decade at 50 days, with respect to UTC. This time scale significantly improves the accuracy in timekee** and could change the existing time-scale architectures. △ Less

Submitted 10 April, 2019; v1 submitted 18 February, 2019; originally announced February 2019.

Journal ref: Phys. Rev. Applied 12, 044069 (2019)

Towards Adoption of an Optical Second: Verifying Optical Clocks at the SI Limit

Authors: W. F. McGrew, X. Zhang, H. Leopardi, R. J. Fasano, D. Nicolodi, K. Beloy, J. Yao, J. A. Sherman, S. A. Schäffer, J. Savory, R. C. Brown, S. Römisch, C. W. Oates, T. E. Parker, T. M. Fortier, A. D. Ludlow

Abstract: The pursuit of ever more precise measures of time and frequency is likely to lead to the eventual redefinition of the second in terms of an optical atomic transition. To ensure continuity with the current definition, based on a microwave transition between hyperfine levels in ground-state $^{133}$Cs, it is necessary to measure the absolute frequency of candidate standards, which is done by compari… ▽ More The pursuit of ever more precise measures of time and frequency is likely to lead to the eventual redefinition of the second in terms of an optical atomic transition. To ensure continuity with the current definition, based on a microwave transition between hyperfine levels in ground-state $^{133}$Cs, it is necessary to measure the absolute frequency of candidate standards, which is done by comparing against a primary cesium reference. A key verification of this process can be achieved by performing a loop closure$-$comparing frequency ratios derived from absolute frequency measurements against ratios determined from direct optical comparisons. We measure the $^1$S$_0\!\rightarrow^3$P$_0$ transition of $^{171}$Yb by comparing the clock frequency to an international frequency standard with the aid of a maser ensemble serving as a flywheel oscillator. Our measurements consist of 79 separate runs spanning eight months, and we determine the absolute frequency to be 518 295 836 590 863.71(11) Hz, the uncertainty of which is equivalent to a fractional frequency of $2.1\times10^{-16}$. This absolute frequency measurement, the most accurate reported for any transition, allows us to close the Cs-Yb-Sr-Cs frequency measurement loop at an uncertainty of $<$3$\times10^{-16}$, limited by the current realization of the SI second. We use these measurements to tighten the constraints on variation of the electron-to-proton mass ratio, $μ=m_e/m_p$. Incorporating our measurements with the entire record of Yb and Sr absolute frequency measurements, we infer a coupling coefficient to gravitational potential of $k_\mathrmμ=(-1.9\pm 9.4)\times10^{-7}$ and a drift with respect to time of $\frac{\dotμ}μ=(5.3 \pm 6.5)\times10^{-17}/$yr. △ Less

Submitted 14 November, 2018; originally announced November 2018.

Optimizing the linearity in high-speed photodiodes

Authors: J. Davila-Rodriguez, X. Xie, J. Zang, C. J. Long, T. M. Fortier, H. Leopardi, T. Nakamura, J. C. Campbell, S. A. Diddams, F. Quinlan

Abstract: Analog photonic links require high-fidelity, high-speed optical-to-electrical conversion for applications such as radio-over-fiber, synchronization at kilometer-scale facilities, and low-noise electronic signal generation. Photodetector nonlinearity is a particularly vexing problem, causing signal distortion and excess noise, especially in systems utilizing ultrashort optical pulses. Here we show… ▽ More Analog photonic links require high-fidelity, high-speed optical-to-electrical conversion for applications such as radio-over-fiber, synchronization at kilometer-scale facilities, and low-noise electronic signal generation. Photodetector nonlinearity is a particularly vexing problem, causing signal distortion and excess noise, especially in systems utilizing ultrashort optical pulses. Here we show that photodetectors designed for high power handling and high linearity can perform optical-to-electrical conversion of ultrashort optical pulses with unprecedented linearity over a large photocurrent range. We also show that the broadband, complex impedance of the circuit following the photodiode modifies the linearity significantly. By externally manipulating the circuit impedance, we extend the detector's linear range to higher photocurrents, with over 50 dB rejection of amplitude-to-phase conversion for photocurrents up to 40 mA. This represents a 1000-fold improvement over state-of-the-art photodiodes and significantly extends the attainable microwave power by a factor of four. As such, we eliminate the long-standing requirement in ultrashort pulse detection of precise tuning of the photodiode's operating parameters (average photocurrent, bias voltage or temperature) to coincide with a nonlinearity minimum. These results should also apply more generally to reduce nonlinear distortion in a range of other microwave photonics applications. △ Less

Submitted 13 August, 2018; originally announced August 2018.

Hyperpolarizability and operational magic wavelength in an optical lattice clock

Authors: R. C. Brown, N. B. Phillips, K. Beloy, W. F. McGrew, M. Schioppo, R. J. Fasano, G. Milani, X. Zhang, N. Hinkley, H. Leopardi, T. H. Yoon, D. Nicolodi, T. M. Fortier, A. D. Ludlow

Abstract: Optical clocks benefit from tight atomic confinement enabling extended interrogation times as well as Doppler- and recoil-free operation. However, these benefits come at the cost of frequency shifts that, if not properly controlled, may degrade clock accuracy. Numerous theoretical studies have predicted optical lattice clock frequency shifts that scale nonlinearly with trap depth. To experimentall… ▽ More Optical clocks benefit from tight atomic confinement enabling extended interrogation times as well as Doppler- and recoil-free operation. However, these benefits come at the cost of frequency shifts that, if not properly controlled, may degrade clock accuracy. Numerous theoretical studies have predicted optical lattice clock frequency shifts that scale nonlinearly with trap depth. To experimentally observe and constrain these shifts in an $^{171}$Yb optical lattice clock, we construct a lattice enhancement cavity that exaggerates the light shifts. We observe an atomic temperature that is proportional to the optical trap depth, fundamentally altering the scaling of trap-induced light shifts and simplifying their parametrization. We identify an "operational" magic wavelength where frequency shifts are insensitive to changes in trap depth. These measurements and scaling analysis constitute an essential systematic characterization for clock operation at the $10^{-18}$ level and beyond. △ Less

Submitted 24 October, 2017; v1 submitted 29 August, 2017; originally announced August 2017.

Comments: 5 + 2 pages, 3 figures, added supplemental

Journal ref: Phys. Rev. Lett. 119, 253001 (2017)

Photonic-chip supercontinuum with tailored spectra for precision frequency metrology

Authors: David Carlson, Daniel Hickstein, Alexander Lind, Judith Olson, Richard Fox, Roger Brown, Andrew Ludlow, Qing Li, Daron Westly, Holly Leopardi, Tara Fortier, Kartik Srinivasan, Scott Diddams, Scott Papp

Abstract: Supercontinuum generation using chip-integrated photonic waveguides is a powerful approach for spectrally broadening pulsed laser sources with very low pulse energies and compact form factors. When pumped with a mode-locked laser frequency comb, these waveguides can coherently expand the comb spectrum to more than an octave in bandwidth to enable self-referenced stabilization. However, for applica… ▽ More Supercontinuum generation using chip-integrated photonic waveguides is a powerful approach for spectrally broadening pulsed laser sources with very low pulse energies and compact form factors. When pumped with a mode-locked laser frequency comb, these waveguides can coherently expand the comb spectrum to more than an octave in bandwidth to enable self-referenced stabilization. However, for applications in frequency metrology and precision spectroscopy, it is desirable to not only support self-referencing, but also to generate low-noise combs with customizable broadband spectra. In this work, we demonstrate dispersion-engineered waveguides based on silicon nitride that are designed to meet these goals and enable precision optical metrology experiments across large wavelength spans. We perform a clock comparison measurement and report a clock-limited relative frequency instability of $3.8\times10^{-15}$ at $τ= 2$ seconds between a 1550 nm cavity-stabilized reference laser and NIST's calcium atomic clock laser at 657 nm using a two-octave waveguide-supercontinuum comb. △ Less

Submitted 13 February, 2017; v1 submitted 10 February, 2017; originally announced February 2017.

Journal ref: Phys. Rev. Applied 8, 014027 (2017)

A compact, thermal noise limited reference cavity for ultra-low noise microwave generation

Authors: J. Davila-Rodriguez, F. N. Baynes, A. D. Ludlow, T. M. Fortier, H. Leopardi, S. A. Diddams, F. Quinlan

Abstract: We demonstrate an easy to manufacture, 25 mm long ultra-stable optical reference cavity for transportable photonic microwave generation systems. Employing a rigid holding geometry that is first-order insensitive to the squeezing force and a cavity geometry that improves the thermal noise limit at room temperature, we observe a laser phase noise that is nearly thermal noise limited for three freque… ▽ More We demonstrate an easy to manufacture, 25 mm long ultra-stable optical reference cavity for transportable photonic microwave generation systems. Employing a rigid holding geometry that is first-order insensitive to the squeezing force and a cavity geometry that improves the thermal noise limit at room temperature, we observe a laser phase noise that is nearly thermal noise limited for three frequency decades (1 Hz to 1 kHz offset) and supports 10 GHz generation with phase noise near -100 dBc/Hz at 1 Hz offset and <-173 dBc/Hz for all offsets >600 Hz. The fractional frequency stability reaches $2\times10^{-15}$ at 0.1 s of averaging. △ Less

Submitted 6 January, 2017; originally announced January 2017.

Comments: Letter

Single-branch Er:fiber frequency comb for optical synthesis at the $10^{-18}$ level

Authors: Holly Leopardi, Josue Davila-Rodriguez, Franklyn Quinlan, Judith Olson, Scott Diddams, Tara Fortier

Abstract: Laser frequency combs based on erbium-doped fiber mode-locked lasers have shown great potential for compact, robust and efficient optical clock comparisons. However, to simultaneously compare multiple optical clock species, fiber laser frequency combs typically require multiple amplifiers and fiber optic paths that reduce the achievable frequency stability near 1 part in $10^{16}$ at 1s. In this p… ▽ More Laser frequency combs based on erbium-doped fiber mode-locked lasers have shown great potential for compact, robust and efficient optical clock comparisons. However, to simultaneously compare multiple optical clock species, fiber laser frequency combs typically require multiple amplifiers and fiber optic paths that reduce the achievable frequency stability near 1 part in $10^{16}$ at 1s. In this paper we describe an erbium-fiber laser frequency comb that overcomes these conventional challenges and supports optical frequency synthesis at the millihertz level, or fractionally $3 x 10^{-18}$ $tau^{-1/2}$ by ensuring that all critical fiber paths are within the servo-controlled feedback loop. We demonstrate the application of this frequency comb as a synthesizer for optical clocks operating across a wavelength range from 650 nm to 2100 nm. △ Less

Submitted 7 November, 2016; originally announced November 2016.

Microresonator Brillouin Laser Stabilization Using a Microfabricated Rubidium Cell

Authors: William Loh, Matthew T. Hummon, Holly F. Leopardi, Tara M. Fortier, Frank Quinlan, John Kitching, Scott B. Papp, Scott A. Diddams

Abstract: We frequency stabilize the output of a miniature stimulated Brillouin scattering (SBS) laser to rubidium atoms in a microfabricated cell to realize a laser system with frequency stability at the $10^{-11}$ level over seven decades in averaging time. In addition, our system has the advantages of robustness, low cost and the potential for integration that would lead to still further miniaturization.… ▽ More We frequency stabilize the output of a miniature stimulated Brillouin scattering (SBS) laser to rubidium atoms in a microfabricated cell to realize a laser system with frequency stability at the $10^{-11}$ level over seven decades in averaging time. In addition, our system has the advantages of robustness, low cost and the potential for integration that would lead to still further miniaturization. The SBS laser operating at 1560 nm exhibits a spectral linewidth of 820 Hz, but its frequency drifts over a few MHz on the 1 hour timescale. By locking the second harmonic of the SBS laser to the Rb reference, we reduce this drift by a factor of $10^3$ to the level of a few kHz over the course of an hour. For our combined SBS and Rb laser system, we measure a frequency noise of $4\times10^4$ $Hz^2/Hz$ at 10 Hz offset frequency which rapidly rolls off to a level of 0.2 $Hz^2/Hz$ at 100 kHz offset. The corresponding Allan deviation is $\leq2\times10^{-11}$ for averaging times spanning $10^{-4}$ to $10^3$ s. By optically dividing the signal of the laser down to microwave frequencies, we generate an RF signal at 2 GHz with phase noise at the level of -76 dBc/Hz and -140 dBc/Hz at offset frequencies of 10 Hz and 10 kHz, respectively. △ Less

Submitted 24 April, 2016; originally announced April 2016.

Phase Coherent Link of an Atomic Clock to a Self-Referenced Microresonator Frequency Comb

Authors: Pascal Del'Haye, Aurelien Coillet, Tara Fortier, Katja Beha, Daniel C. Cole, Ki Youl Yang, Hansuek Lee, Kerry J. Vahala, Scott B. Papp, Scott A. Diddams

Abstract: The counting and control of optical cycles of light has become common with modelocked laser frequency combs. But even with advances in laser technology, modelocked laser combs remain bulk-component devices that are hand-assembled. In contrast, a frequency comb based on the Kerr-nonlinearity in a dielectric microresonator will enable frequency comb functionality in a micro-fabricated and chip-integ… ▽ More The counting and control of optical cycles of light has become common with modelocked laser frequency combs. But even with advances in laser technology, modelocked laser combs remain bulk-component devices that are hand-assembled. In contrast, a frequency comb based on the Kerr-nonlinearity in a dielectric microresonator will enable frequency comb functionality in a micro-fabricated and chip-integrated package suitable for use in a wide-range of environments. Such an advance will significantly impact fields ranging from spectroscopy and trace gas sensing, to astronomy, communications, atomic time kee** and photonic data processing. Yet in spite of the remarkable progress shown over the past years, microresonator frequency combs ("microcombs") have still been without the key function of direct f-2f self-referencing and phase-coherent frequency control that will be critical for enabling their full potential. Here we realize these missing elements using a low-noise 16.4 GHz silicon chip microcomb that is coherently broadened from its initial 1550 nm wavelength and subsequently f-2f self-referenced and phase-stabilized to an atomic clock. With this advance, we not only realize the highest repetition rate octave-span frequency comb ever achieved, but we highlight the low-noise microcomb properties that support highest atomic clock limited frequency stability. △ Less

Submitted 25 November, 2015; originally announced November 2015.

Digital-photonic synthesis of ultra-low noise tunable signals from RF to 100 GHz

Authors: T. M. Fortier, A. Rolland, F. Quinlan, F. N. Baynes, A. J. Metcalf, A. Hati, A. Ludlow, N. Hinkley, M. Shimizu, T. Ishibashi, J. C. Campbell, S. A. Diddams

Abstract: The demand for higher data rates and better synchronization in communication and navigation systems necessitates the development of new wideband and tunable sources with noise performance exceeding that provided by traditional oscillators and synthesizers. Precision synthesis is paramount for providing frequency references and timing in a broad range of applications including next-generation telec… ▽ More The demand for higher data rates and better synchronization in communication and navigation systems necessitates the development of new wideband and tunable sources with noise performance exceeding that provided by traditional oscillators and synthesizers. Precision synthesis is paramount for providing frequency references and timing in a broad range of applications including next-generation telecommunications, high precision measurement, and radar and sensing. Here we describe a digital-photonic synthesizer (DPS) based on optical frequency division that enables the generation of widely tunable signals from near DC to 100 GHz with a fractional frequency instability of 1 part in 10^15. The spectral purity of the DPS derived signals represents an improvement in close-to-carrier noise performance over the current state-of-the-art of nearly 7 orders of magnitude in the W-band (100 GHz), and up to 5 orders of magnitude in the X-band (10 GHz). △ Less

Submitted 10 June, 2015; originally announced June 2015.

Attosecond Timing in Optical-to-Electrical Conversion

Authors: Fred N. Baynes, Franklyn Quinlan, Tara Fortier, Qiugui Zhou, Andreas Beling, Joe C. Campbell, Scott A. Diddams

Abstract: The most frequency-stable sources of electromagnetic radiation are produced optically, and optical frequency combs provide the means for high fidelity frequency transfer across hundreds of terahertz and into the microwave domain. A critical step in this photonic-based synthesis of microwave signals is the optical-to-electrical conversion process. Here we show that attosecond (as) timing stability… ▽ More The most frequency-stable sources of electromagnetic radiation are produced optically, and optical frequency combs provide the means for high fidelity frequency transfer across hundreds of terahertz and into the microwave domain. A critical step in this photonic-based synthesis of microwave signals is the optical-to-electrical conversion process. Here we show that attosecond (as) timing stability can be preserved across the opto-electronic interface of a photodiode, despite an intrinsic temporal response that is more than six orders of magnitude slower. The excess timing noise in the photodetection of a periodic train of ultrashort optical pulses behaves as flicker noise (1/f) with amplitude of 4 as/Sqrt(Hz) at 1 Hz offset. The corresponding fractional frequency fluctuations are 1.4x10-17 at 1 second and 5.5x10-20 at 1000 seconds. These results demonstrate that direct photodetection, as part of frequency-comb-based microwave synthesis, can support the timing performance of the best optical frequency standards, and thereby opens the possibility for generating microwave signals with significantly better stability than any existing source. △ Less

Submitted 6 January, 2015; v1 submitted 27 October, 2014; originally announced October 2014.

Optical amplification and pulse interleaving for low noise photonic microwave generation

Authors: Franklyn Quinlan, Fred N. Baynes, Tara M. Fortier, Qiugui Zhou, Allen Cross, Joe C. Campbell, Scott A. Diddams

Abstract: We investigate the impact of pulse interleaving and optical amplification on the spectral purity of microwave signals generated by photodetecting the pulsed output of an Er:fiber-based optical frequency comb. It is shown that the microwave phase noise floor can be extremely sensitive to delay length errors in the interleaver, and the contribution of the quantum noise from optical amplification to… ▽ More We investigate the impact of pulse interleaving and optical amplification on the spectral purity of microwave signals generated by photodetecting the pulsed output of an Er:fiber-based optical frequency comb. It is shown that the microwave phase noise floor can be extremely sensitive to delay length errors in the interleaver, and the contribution of the quantum noise from optical amplification to the phase noise can be reduced ~10 dB for short pulse detection. We exploit optical amplification, in conjunction with high power handling modified uni-traveling carrier photodetectors, to generate a phase noise floor on a 10 GHz carrier of -175 dBc/Hz, the lowest ever demonstrated in the photodetection of a mode-locked fiber laser. At all offset frequencies, the photodetected 10 GHz phase noise performance is comparable to or better than the lowest phase noise results yet demonstrated with stabilized Ti:sapphire frequency combs. △ Less

Submitted 6 December, 2013; originally announced December 2013.

Absolute and relative stability of an optical frequency reference based on spectral hole burning in Eu$^{3+}$:Y$_2$SiO$_5$

Authors: David R. Leibrandt, Michael J. Thorpe, Chin-Wen Chou, Tara M. Fortier, Scott A. Diddams, Till Rosenband

Abstract: We present and analyze four frequency measurements designed to characterize the performance of an optical frequency reference based on spectral hole burning in \EuYSO. The first frequency comparison, between a single unperturbed spectral hole and a hydrogen maser, demonstrates a fractional frequency drift rate of $5 \times 10^{-18}$ s$^{-1}$. Optical-frequency comparisons between a pattern of spec… ▽ More We present and analyze four frequency measurements designed to characterize the performance of an optical frequency reference based on spectral hole burning in \EuYSO. The first frequency comparison, between a single unperturbed spectral hole and a hydrogen maser, demonstrates a fractional frequency drift rate of $5 \times 10^{-18}$ s$^{-1}$. Optical-frequency comparisons between a pattern of spectral holes, a Fabry-Pérot cavity, and an Al$^+$ optical atomic clock show a short-term fractional frequency stability of $1 \times10^{-15} τ^{-1/2}$ that averages down to $2.5^{+1.1}_{-0.5} \times 10^{-16}$ at $τ= 540~s$ (with linear frequency drift removed). Finally, spectral hole patterns in two different \EuYSO crystals located in the same cryogenic vessel are compared, yielding a short-term stability of $7 \times10^{-16} τ^{-1/2}$ that averages down to $5.5^{+1.8}_{-0.9} \times 10^{-17}$ at $τ= 204$~s (with quadratic frequency drift removed). △ Less

Submitted 31 October, 2013; v1 submitted 19 July, 2013; originally announced July 2013.

Comments: 5 pages, 4 figures

Analysis of shot noise in the detection of ultrashort optical pulse trains

Authors: Franklyn Quinlan, Tara M. Fortier, Haifeng Jiang, Scott A. Diddams

Abstract: We present a frequency domain model of shot noise in the photodetection of ultrashort optical pulse trains using a time-varying analysis. Shot noise-limited photocurrent power spectral densities, signal-to-noise expressions, and shot noise spectral correlations are derived that explicitly include the finite response of the photodetector. It is shown that the strength of the spectral correlations i… ▽ More We present a frequency domain model of shot noise in the photodetection of ultrashort optical pulse trains using a time-varying analysis. Shot noise-limited photocurrent power spectral densities, signal-to-noise expressions, and shot noise spectral correlations are derived that explicitly include the finite response of the photodetector. It is shown that the strength of the spectral correlations in the shot noise depends on the optical pulse width, and that these correlations can create orders-of-magnitude imbalance between the shot noise-limited amplitude and phase noise of photonically generated microwave carriers. It is also shown that only by accounting for spectral correlations can shot noise be equated with the fundamental quantum limit in the detection of optical pulse-to-pulse timing jitter. △ Less

Submitted 25 February, 2013; originally announced February 2013.

Comments: 27 pages, 5 figures. Submitted to JOSA B

Photonic microwave generation with high-power photodiodes

Authors: Tara M. Fortier, Franklyn Quinlan, Archita Hati, Craig Nelson, Jennifer A. Taylor, Yang Fu, Joe Campbell, Scott A. Diddams

Abstract: We utilize and characterize high-power, high-linearity modified uni-traveling carrier (MUTC) photodiodes for low-phase-noise photonic microwave generation based on optical frequency division. When illuminated with picosecond pulses from a repetition-rate-multiplied gigahertz Ti:sapphire modelocked laser, the photodiodes can achieve 10 GHz signal power of +14 dBm. Using these diodes, a 10 GHz micro… ▽ More We utilize and characterize high-power, high-linearity modified uni-traveling carrier (MUTC) photodiodes for low-phase-noise photonic microwave generation based on optical frequency division. When illuminated with picosecond pulses from a repetition-rate-multiplied gigahertz Ti:sapphire modelocked laser, the photodiodes can achieve 10 GHz signal power of +14 dBm. Using these diodes, a 10 GHz microwave tone is generated with less than 500 attoseconds absolute integrated timing jitter (1 Hz-10 MHz) and a phase noise floor of -177 dBc/Hz. We also characterize the electrical response, amplitude-to-phase conversion, saturation and residual noise of the MUTC photodiodes. △ Less

Submitted 24 February, 2013; originally announced February 2013.

Comments: 3 pages, 3 figures

Sub-femtosecond absolute timing precision with a 10 GHz hybrid photonic-microwave oscillator

Authors: T. M. Fortier, C. W. Nelson, A. Hati, F. Quinlan, J. Taylor, H. Jiang, C. W. Chou, T. Rosenband, N. Lemke, A. Ludlow, D. Howe, C. W. Oates, S. A. Diddams

Abstract: We present an optical-electronic approach to generating microwave signals with high spectral purity. By circumventing shot noise and operating near fundamental thermal limits, we demonstrate 10 GHz signals with an absolute timing jitter for a single hybrid oscillator of 420 attoseconds (1Hz - 5 GHz). We present an optical-electronic approach to generating microwave signals with high spectral purity. By circumventing shot noise and operating near fundamental thermal limits, we demonstrate 10 GHz signals with an absolute timing jitter for a single hybrid oscillator of 420 attoseconds (1Hz - 5 GHz). △ Less

Submitted 5 May, 2012; originally announced May 2012.

Journal ref: Applied Physics Letters 100, 231111 (2012)

Noise floor reduction of an Er:fiber laser-based photonic microwave generator

Authors: Haifeng Jiang, Jennifer Taylor, Franklyn Quinlan, Tara Fortier, Scott A. Diddams

Abstract: The generation of microwaves from optical signals suffers from thermal and shot noise inherent in the photodetection process. This problem is more acute at lower pulse repetition rates where photodiode saturation limits the achievable signal-to-noise ratio. In this paper, we demonstrate a 10-15 dB reduction in the 10 GHz phase noise floor by multiplication of the pulse repetition rate. Starting wi… ▽ More The generation of microwaves from optical signals suffers from thermal and shot noise inherent in the photodetection process. This problem is more acute at lower pulse repetition rates where photodiode saturation limits the achievable signal-to-noise ratio. In this paper, we demonstrate a 10-15 dB reduction in the 10 GHz phase noise floor by multiplication of the pulse repetition rate. Starting with a 250 MHz fundamentally mode-locked erbium(Er):fiber laser, we compare two different approaches to repetition rate multiplication: Fabry-Perot cavity filtering and a cascaded, unbalanced Mach-Zehnder fiber-based interferometer. These techniques reduce the phase noise floor on the 10 GHz photodetected harmonic to -158 dBc/Hz and -162 dBc/Hz, respectively, for Fourier frequencies higher than 100 kHz. △ Less

Submitted 10 September, 2011; originally announced September 2011.

Comments: 12 pages, 7 figures

Journal ref: subimtted to IEEE Photonics Journal 2011

Frequency-stabilization to 6x10^-16 via spectral-hole burning

Authors: Michael J. Thorpe, Lars Rippe, Tara M. Fortier, Matthew S. Kirchner, Till Rosenband

Abstract: We demonstrate two-stage laser stabilization based on a combination of Fabry- Perot and spectral-hole burning techniques. The laser is first pre-stabilized by the Fabry-Perot cavity to a fractional-frequency stability of sigma_y(tau) < 10^-13. A pattern of spectral holes written in the absorption spectrum of Eu3+:Y2SiO5 serves to further stabilize the laser to sigma_y(tau) = 6x10^-16 for 2 s < tau… ▽ More We demonstrate two-stage laser stabilization based on a combination of Fabry- Perot and spectral-hole burning techniques. The laser is first pre-stabilized by the Fabry-Perot cavity to a fractional-frequency stability of sigma_y(tau) < 10^-13. A pattern of spectral holes written in the absorption spectrum of Eu3+:Y2SiO5 serves to further stabilize the laser to sigma_y(tau) = 6x10^-16 for 2 s < tau < 8 s. Measurements characterizing the frequency sensitivity of Eu3+:Y2SiO5 spectral holes to environmental perturbations suggest that they can be more frequency stable than Fabry-Perot cavities. △ Less

Submitted 2 June, 2011; originally announced June 2011.

Ultralow phase noise microwave generation with an Er:fiber-based optical frequency divider

Authors: F. Quinlan, T. M. Fortier, M. S. Kirchner, J. A. Taylor, M. J. Thorpe, N. Lemke, A. D. Ludlow, Y. Jiang, C. W. Oates, S. A. Diddams

Abstract: We present an optical frequency divider based on a 200 MHz repetition rate Er:fiber mode-locked laser that, when locked to a stable optical frequency reference, generates microwave signals with absolute phase noise that is equal to or better than cryogenic microwave oscillators. At 1 Hz offset from a 10 GHz carrier, the phase noise is below -100 dBc/Hz, limited by the optical reference. For offset… ▽ More We present an optical frequency divider based on a 200 MHz repetition rate Er:fiber mode-locked laser that, when locked to a stable optical frequency reference, generates microwave signals with absolute phase noise that is equal to or better than cryogenic microwave oscillators. At 1 Hz offset from a 10 GHz carrier, the phase noise is below -100 dBc/Hz, limited by the optical reference. For offset frequencies > 10 kHz, the phase noise is shot noise limited at -145 dBc/Hz. An analysis of the contribution of the residual noise from the Er:fiber optical frequency divider is also presented. △ Less

Submitted 7 May, 2011; originally announced May 2011.

Comments: 4 pages, 3 figures

Generation of Ultrastable Microwaves via Optical Frequency Division

Authors: T. M. Fortier, M. S. Kirchner, F. Quinlan, J. Taylor, J. C. Bergquist, T. Rosenband, N. Lemke, A. Ludlow, Y. Jiang, C. W. Oates, S. A. Diddams

Abstract: There has been increased interest in the use and manipulation of optical fields to address challenging problems that have traditionally been approached with microwave electronics. Some examples that benefit from the low transmission loss, agile modulation and large bandwidths accessible with coherent optical systems include signal distribution, arbitrary waveform generation, and novel imaging. We… ▽ More There has been increased interest in the use and manipulation of optical fields to address challenging problems that have traditionally been approached with microwave electronics. Some examples that benefit from the low transmission loss, agile modulation and large bandwidths accessible with coherent optical systems include signal distribution, arbitrary waveform generation, and novel imaging. We extend these advantages to demonstrate a microwave generator based on a high-Q optical resonator and a frequency comb functioning as an optical-to-microwave divider. This provides a 10 GHz electrical signal with fractional frequency instability <8e-16 at 1 s, a value comparable to that produced by the best microwave oscillators, but without the need for cryogenic temperatures. Such a low-noise source can benefit radar systems, improve the bandwidth and resolution of communications and digital sampling systems, and be valuable for large baseline interferometry, precision spectroscopy and the realization of atomic time. △ Less

Submitted 28 April, 2011; v1 submitted 19 January, 2011; originally announced January 2011.

Journal ref: Nature Photonics 5, 425-429 (2011)

Femtosecond frequency comb measurement of absolute frequencies and hyperfine coupling constants in cesium vapor

Authors: Jason E. Stalnaker, Vela Mbele, Vladislav Gerginov, Tara M. Fortier, Scott A. Diddams, Leo Hollberg, Carol E. Tanner

Abstract: We report measurements of absolute transition frequencies and hyperfine coupling constants for the 8S_{1/2}, 9S_{1/2}, 7D_{3/2}, and 7D_{5/2} states in ^{133}Cs vapor. The stepwise excitation through either the 6P_{1/2} or 6P_{3/2} intermediate state is performed directly with broadband laser light from a stabilized femtosecond laser optical-frequency comb. The laser beam is split, counter-propa… ▽ More We report measurements of absolute transition frequencies and hyperfine coupling constants for the 8S_{1/2}, 9S_{1/2}, 7D_{3/2}, and 7D_{5/2} states in ^{133}Cs vapor. The stepwise excitation through either the 6P_{1/2} or 6P_{3/2} intermediate state is performed directly with broadband laser light from a stabilized femtosecond laser optical-frequency comb. The laser beam is split, counter-propagated and focused into a room-temperature Cs vapor cell. The repetition rate of the frequency comb is scanned and we detect the fluorescence on the 7P_{1/2,3/2} -> 6S_{1/2} branches of the decay of the excited states. The excitations to the different states are isolated by the introduction of narrow-bandwidth interference filters in the laser beam paths. Using a nonlinear least-squares method we find measurements of transition frequencies and hyperfine coupling constants that are in agreement with other recent measurements for the 8S state and provide improvement by two orders of magnitude over previously published results for the 9S and 7D states. △ Less

Submitted 18 January, 2010; originally announced January 2010.

Comments: 14 pages, 14 figures

Spin-1/2 Optical Lattice Clock

Authors: N. D. Lemke, A. D. Ludlow, Z. W. Barber, T. M. Fortier, S. A. Diddams, Y. Jiang, S. R. Jefferts, T. P. Heavner, T. E. Parker, C. W. Oates

Abstract: We experimentally investigate an optical clock based on $^{171}$Yb ($I=1/2$) atoms confined in an optical lattice. We have evaluated all known frequency shifts to the clock transition, including a density-dependent collision shift, with a fractional uncertainty of $3.4 \times 10^{-16}$, limited principally by uncertainty in the blackbody radiation Stark shift. We measured the absolute clock tran… ▽ More We experimentally investigate an optical clock based on $^{171}$Yb ($I=1/2$) atoms confined in an optical lattice. We have evaluated all known frequency shifts to the clock transition, including a density-dependent collision shift, with a fractional uncertainty of $3.4 \times 10^{-16}$, limited principally by uncertainty in the blackbody radiation Stark shift. We measured the absolute clock transition frequency relative to the NIST-F1 Cs fountain clock and find the frequency to be 518 295 836 590 865.2(0.7) Hz. △ Less

Submitted 24 July, 2009; v1 submitted 5 June, 2009; originally announced June 2009.

Comments: 4 pages, 2 figures, accepted to PRL

Probing Interactions between Ultracold Fermions

Authors: G. K. Campbell, M. M. Boyd, J. W. Thomsen, M. J. Martin, S. Blatt, M. D. Swallows, T. L. Nicholson, T. Fortier, C. W. Oates, S. A. Diddams, N. D. Lemke, P. Naidon, P. Julienne, Jun Ye, A. D. Ludlow

Abstract: At ultracold temperatures, the Pauli exclusion principle suppresses collisions between identical fermions. This has motivated the development of atomic clocks using fermionic isotopes. However, by probing an optical clock transition with thousands of lattice-confined, ultracold fermionic Sr atoms, we have observed density-dependent collisional frequency shifts. These collision effects have been… ▽ More At ultracold temperatures, the Pauli exclusion principle suppresses collisions between identical fermions. This has motivated the development of atomic clocks using fermionic isotopes. However, by probing an optical clock transition with thousands of lattice-confined, ultracold fermionic Sr atoms, we have observed density-dependent collisional frequency shifts. These collision effects have been measured systematically and are supported by a theoretical description attributing them to inhomogeneities in the probe excitation process that render the atoms distinguishable. This work has also yielded insights for zeroing the clock density shift. △ Less

Submitted 19 February, 2009; v1 submitted 15 February, 2009; originally announced February 2009.

Comments: accepted to Science

Journal ref: Science 324, 360 (2009)

Frequency evaluation of the doubly forbidden $^1S_0\to ^3P_0$ transition in bosonic $^{174}$Yb

Authors: N. Poli, Z. W. Barber, N. D. Lemke, C. W. Oates, L. S. Ma, J. E. Stalnaker, T. M. Fortier, S. A. Diddams, L. Hollberg, J. C. Bergquist, A. Brusch, S. Jefferts, T. Heavner, T. Parker

Abstract: We report an uncertainty evaluation of an optical lattice clock based on the $^1S_0\leftrightarrow^3P_0$ transition in the bosonic isotope $^{174}$Yb by use of magnetically induced spectroscopy. The absolute frequency of the $^1S_0\leftrightarrow^3P_0$ transition has been determined through comparisons with optical and microwave standards at NIST. The weighted mean of the evaluations is $ν$(… ▽ More We report an uncertainty evaluation of an optical lattice clock based on the $^1S_0\leftrightarrow^3P_0$ transition in the bosonic isotope $^{174}$Yb by use of magnetically induced spectroscopy. The absolute frequency of the $^1S_0\leftrightarrow^3P_0$ transition has been determined through comparisons with optical and microwave standards at NIST. The weighted mean of the evaluations is $ν$($^{174}$Yb)=518 294 025 309 217.8(0.9) Hz. The uncertainty due to systematic effects has been reduced to less than 0.8 Hz, which represents $1.5\times10^{-15}$ in fractional frequency. △ Less

Submitted 31 March, 2008; originally announced March 2008.

Comments: 4 pages, 3 figure -Submitted to PRA Rapid Communications

Astronomical spectrograph calibration with broad-spectrum frequency combs

Authors: D. A. Braje, M. S. Kirchner, S. Osterman, T. Fortier, S. A. Diddams

Abstract: Broadband femtosecond-laser frequency combs are filtered to spectrographically resolvable frequency-mode spacing, and the limitations of using cavities for spectral filtering are considered. Data and theory are used to show implications to spectrographic calibration of high-resolution, astronomical spectrometers. Broadband femtosecond-laser frequency combs are filtered to spectrographically resolvable frequency-mode spacing, and the limitations of using cavities for spectral filtering are considered. Data and theory are used to show implications to spectrographic calibration of high-resolution, astronomical spectrometers. △ Less

Submitted 4 March, 2008; originally announced March 2008.

Optical Lattice Induced Light Shifts in an Yb Atomic Clock

Authors: Z. W. Barber, J. E. Stalnaker, N. D. Lemke, N. Poli, C. W. Oates, T. M. Fortier, S. A. Diddams, L. Hollberg, C. W. Hoyt

Abstract: We present an experimental study of the lattice induced light shifts on the 1S_0-3P_0 optical clock transition (v_clock~518 THz) in neutral ytterbium. The ``magic'' frequency, v_magic, for the 174Yb isotope was determined to be 394 799 475(35)MHz, which leads to a first order light shift uncertainty of 0.38 Hz on the 518 THz clock transition. Also investigated were the hyperpolarizability shifts… ▽ More We present an experimental study of the lattice induced light shifts on the 1S_0-3P_0 optical clock transition (v_clock~518 THz) in neutral ytterbium. The ``magic'' frequency, v_magic, for the 174Yb isotope was determined to be 394 799 475(35)MHz, which leads to a first order light shift uncertainty of 0.38 Hz on the 518 THz clock transition. Also investigated were the hyperpolarizability shifts due to the nearby 6s6p 3P_0 - 6s8p 3P_0, 6s8p 3P_2, and 6s5f 3F_2 two-photon resonances at 759.708 nm, 754.23 nm, and 764.95 nm respectively. By tuning the lattice frequency over the two-photon resonances and measuring the corresponding clock transition shifts, the hyperpolarizability shift was estimated to be 170(33) mHz for a linear polarized, 50 uK deep, lattice at the magic wavelength. In addition, we have confirmed that a circularly polarized lattice eliminates the J=0 - J=0 two-photon resonance. These results indicate that the differential polarizability and hyperpolarizability frequency shift uncertainties in a Yb lattice clock could be held to well below 10^-17. △ Less

Submitted 1 February, 2008; originally announced February 2008.

Comments: Accepted to PRL

Sr lattice clock at 1x10^{-16} fractional uncertainty by remote optical evaluation with a Ca clock

Authors: A. D. Ludlow, T. Zelevinsky, G. K. Campbell, S. Blatt, M. M. Boyd, M. H. G. de Miranda, M. J. Martin, J. W. Thomsen, S. M. Foreman, Jun Ye, T. M. Fortier, J. E. Stalnaker, S. A. Diddams, Y. Le Coq, Z. W. Barber, N. Poli, N. D. Lemke, K. M. Beck, C. W. Oates

Abstract: Optical atomic clocks promise timekee** at the highest precision and accuracy, owing to their high operating frequencies. Rigorous evaluations of these clocks require direct comparisons between them. We have realized a high-performance remote comparison of optical clocks over km-scale urban distances, a key step for development, dissemination, and application of these optical standards. Throug… ▽ More Optical atomic clocks promise timekee** at the highest precision and accuracy, owing to their high operating frequencies. Rigorous evaluations of these clocks require direct comparisons between them. We have realized a high-performance remote comparison of optical clocks over km-scale urban distances, a key step for development, dissemination, and application of these optical standards. Through this remote comparison and a proper design of lattice-confined neutral atoms for clock operation, we evaluate the uncertainty of a strontium (Sr) optical lattice clock at the 1x10-16 fractional level, surpassing the best current evaluations of cesium (Cs) primary standards. We also report on the observation of density-dependent effects in the spin-polarized fermionic sample and discuss the current limiting effect of blackbody radiation-induced frequency shifts. △ Less

Submitted 28 March, 2008; v1 submitted 28 January, 2008; originally announced January 2008.

Comments: To be published in Science, 2008

Journal ref: Science 319, 1805 (2008)

Observation of the 1S0 - 3P0 clock transition in 27Al+

Authors: T. Rosenband, P. O. Schmidt, D. B. Hume, W. M. Itano, T. M. Fortier, J. E. Stalnaker, K. Kim, S. A. Diddams, J. C. J. Koelemeij, J. C. Bergquist, D. J. Wineland

Abstract: We report for the first time, laser spectroscopy of the 1S0 - 3P0 clock transition in 27Al+. A single aluminum ion and a single beryllium ion are simultaneously confined in a linear Paul trap, coupled by their mutual Coulomb repulsion. This coupling allows the beryllium ion to sympathetically cool the aluminum ion, and also enables transfer of the aluminum's electronic state to the beryllium's h… ▽ More We report for the first time, laser spectroscopy of the 1S0 - 3P0 clock transition in 27Al+. A single aluminum ion and a single beryllium ion are simultaneously confined in a linear Paul trap, coupled by their mutual Coulomb repulsion. This coupling allows the beryllium ion to sympathetically cool the aluminum ion, and also enables transfer of the aluminum's electronic state to the beryllium's hyperfine state, which can be measured with high fidelity. These techniques are applied to a measurement of the clock transition frequency, ν= 1 121 015 393 207 851(8) Hz. They are also used to measure the lifetime of the metastable clock state, τ= 20.6 +/- 1.4 s, the ground state 1S0 g-factor, g_S = -0.00079248(14), and the excited state 3P0 g-factor, g_P = -0.00197686(21), in units of the Bohr magneton. △ Less

Submitted 8 April, 2007; v1 submitted 6 March, 2007; originally announced March 2007.

Comments: 4 pages, 2 figures; updated author list

Measurement of excited-state transitions in cold calcium atoms by direct femtosecond frequency-comb spectroscopy

Authors: J. E. Stalnaker, Y. Le Coq, T. M. Fortier, S. A. Diddams, C. W. Oates, L. Hollberg

Abstract: We apply direct frequency-comb spectroscopy, in combination with precision cw spectroscopy, to measure the ${\rm 4s4p} ^3P_1 \to {\rm 4s5s} ^3S_1$ transition frequency in cold calcium atoms. A 657 nm ultrastable cw laser was used to excite atoms on the narrow ($γ\sim 400$ Hz) ${\rm 4s^2} ^1S_0 \to {\rm 4s4p} ^3P_1$ clock transition, and the direct output of the frequency comb was used to excite… ▽ More We apply direct frequency-comb spectroscopy, in combination with precision cw spectroscopy, to measure the ${\rm 4s4p} ^3P_1 \to {\rm 4s5s} ^3S_1$ transition frequency in cold calcium atoms. A 657 nm ultrastable cw laser was used to excite atoms on the narrow ($γ\sim 400$ Hz) ${\rm 4s^2} ^1S_0 \to {\rm 4s4p} ^3P_1$ clock transition, and the direct output of the frequency comb was used to excite those atoms from the ${\rm 4s4p} ^3P_1$ state to the ${\rm 4s5s} ^3S_1$ state. The resonance of this second stage was detected by observing a decrease in population of the ground state as a result of atoms being optically pumped to the metastable ${\rm 4s4p} ^3P_{0,2}$ states. The ${\rm 4s4p} ^3P_1 \to {\rm 4s5s} ^3S_1$ transition frequency is measured to be $ν= 489 544 285 713(56)$ kHz; which is an improvement by almost four orders of magnitude over the previously measured value. In addition, we demonstrate spectroscopy on magnetically trapped atoms in the ${\rm 4s4p} ^3P_2$ state. △ Less

Submitted 16 January, 2007; originally announced January 2007.

Comments: 4 pages 5 figures

Journal ref: Phys. Rev. A 75 (rapid comm.), 040502 (2007)

Kilohertz-resolution spectroscopy of cold atoms with an optical frequency comb

Authors: T. M. Fortier, Y. Le Coq, J. E. Stalnaker, D. Ortega, S. A. Diddams, C. W. Oates, L. Hollberg

Abstract: We have performed sub-Doppler spectroscopy on the narrow intercombination line of cold calcium atoms using the amplified output of a femtosecond laser frequency comb. Injection locking of a 657-nm diode laser with a femtosecond comb allows for two regimes of amplification, one in which many lines of the comb are amplified, and one where a single line is predominantly amplified. The output of the… ▽ More We have performed sub-Doppler spectroscopy on the narrow intercombination line of cold calcium atoms using the amplified output of a femtosecond laser frequency comb. Injection locking of a 657-nm diode laser with a femtosecond comb allows for two regimes of amplification, one in which many lines of the comb are amplified, and one where a single line is predominantly amplified. The output of the laser in both regimes was used to perform kilohertz-level spectroscopy. This experiment demonstrates the potential for high-resolution absolute-frequency spectroscopy over the entire spectrum of the frequency comb output using a single high-finesse optical reference cavity. △ Less

Submitted 3 May, 2006; originally announced May 2006.

Comments: 4 pages, 4 Figures

Journal ref: Phys. Rev. Lett., 97, 163905 (2006)

Observation and absolute frequency measurements of the 1S0 - 3P0 optical clock transition in ytterbium

Authors: C. W. Hoyt, Z. W. Barber, C. W. Oates, T. M. Fortier, S. A. Diddams, L. Hollberg

Abstract: We report the direct excitation of the highly forbidden (6s^2) 1S0 - (6s6p) 3P0 optical transition in two odd isotopes of ytterbium. As the excitation laser frequency is scanned, absorption is detected by monitoring the depletion from an atomic cloud at ~70 uK in a magneto-optical trap. The measured frequency in 171Yb (F=1/2) is 518,295,836,593.2 +/- 4.4 kHz. The measured frequency in 173Yb (F=5… ▽ More We report the direct excitation of the highly forbidden (6s^2) 1S0 - (6s6p) 3P0 optical transition in two odd isotopes of ytterbium. As the excitation laser frequency is scanned, absorption is detected by monitoring the depletion from an atomic cloud at ~70 uK in a magneto-optical trap. The measured frequency in 171Yb (F=1/2) is 518,295,836,593.2 +/- 4.4 kHz. The measured frequency in 173Yb (F=5/2) is 518,294,576,850.0 +/- 4.4 kHz. Measurements are made with a femtosecond-laser frequency comb calibrated by the NIST cesium fountain clock and represent nearly a million-fold reduction in uncertainty. The natural linewidth of these J=0 to J=0 transitions is calculated to be ~10 mHz, making them well-suited to support a new generation of optical atomic clocks based on confinement in an optical lattice. △ Less

Submitted 31 March, 2005; originally announced March 2005.

Comments: 4 pages, 3 figures