-
Human lumbar spine injury risk in dynamic combined compression and flexion loading
Authors:
Sophia K. Tushak,
Bronislaw D. Gepner,
Jason L. Forman,
Jason J. Hallman,
Bengt Pipkorn,
Jason R. Kerrigan
Abstract:
Anticipating changes to vehicle interiors with future automated driving systems, the automobile industry recently has focused attention on crash response in relaxed postures with increased seatback recline. Prior research found that this posture may result in greater risk of lumbar spine injury in the event of a frontal crash. This study developed a lumbar spine injury risk function that estimated…
▽ More
Anticipating changes to vehicle interiors with future automated driving systems, the automobile industry recently has focused attention on crash response in relaxed postures with increased seatback recline. Prior research found that this posture may result in greater risk of lumbar spine injury in the event of a frontal crash. This study developed a lumbar spine injury risk function that estimated injury risk as a function of simultaneously applied compression force and flexion moment. Force and moment failure data from 40 compression-flexion tests were utilized in a Weibull survival model, including appropriate data censoring. A mechanics-based injury metric was formulated, where lumbar spine compression force and flexion moment were normalized to specimen geometry. Subject age was incorporated as a covariate to further improve model fit. A weighting factor was included to adjust the influence of force and moment, and parameter optimization yielded a value of 0.11. Thus, the normalized compression force component had a greater effect on injury risk than the normalized flexion moment component. Additionally, as force was nominally increased, less moment was required to produce injury for a given age and specimen geometry. The resulting injury risk function can be utilized to improve occupant safety in the field.
△ Less
Submitted 21 June, 2022; v1 submitted 13 June, 2022;
originally announced June 2022.
-
Arpu Kuilpu: An H5 from the Outer Main Belt
Authors:
Patrick M. Shober,
Hadrien A. R. Devillepoix,
Eleanor K. Sansom,
Martin C. Towner,
Martin Cupák,
Seamus L. Anderson,
Gretchen Benedix,
Lucy Forman,
Phil A. Bland,
Robert M. Howie,
Benjamin A. D. Hartig,
Matthias Laubenstein,
Francesca Cary,
Andrew Langendam
Abstract:
On 1 June 2019, just before 7:30 PM local time, the Desert Fireball Network detected a -9.3 magnitude fireball over South Australia near the Western Australia border. The event was observed by six fireball observatories, and lasted for five seconds. One station was nearly directly underneath the trajectory, greatly constraining the trajectory solution. This trajectory's backward numerical integrat…
▽ More
On 1 June 2019, just before 7:30 PM local time, the Desert Fireball Network detected a -9.3 magnitude fireball over South Australia near the Western Australia border. The event was observed by six fireball observatories, and lasted for five seconds. One station was nearly directly underneath the trajectory, greatly constraining the trajectory solution. This trajectory's backward numerical integrations indicate that the object originated from the outer main belt with a semi-major axis of 2.75 au. A light curve was also extracted and showed that the body experienced very little fragmentation during its atmospheric passage. A search campaign was conducted with several Desert Fireball Network team members and other volunteers. One 42 g fragment was recovered within the predicted fall area based on the dark flight model. Based on measurements of short-lived radionuclides, the fragment was confirmed to be a fresh fall. The meteorite, Arpu Kuilpu, has been classified as an H5 ordinary chondrite. This marks the fifth fall recovered in Australia by the Desert Fireball Network, and the smallest meteoroid ($\simeq 2$ kg) to ever survive entry and be recovered as a meteorite.
△ Less
Submitted 14 February, 2022;
originally announced February 2022.
-
Trajectory, recovery, and orbital history of the Madura Cave meteorite
Authors:
Hadrien A. R. Devillepoix,
Eleanor K. Sansom,
Patrick Shober,
Seamus L. Anderson,
Martin C. Towner,
Anthony Lagain,
Martin Cupák,
Philip A. Bland,
Robert M. Howie,
Trent Jansen-Sturgeon,
Benjamin A. D. Hartig,
Marcin Sokolowski,
Gretchen Benedix,
Lucy Forman
Abstract:
On the 19th June 2020 at 20:05:07 UTC, a fireball lasting 5.5 s was observed above Western Australia by three Desert Fireball Network observatories. The meteoroid entered the atmosphere with a speed of $14.00 \pm 0.17$ km s$^{-1}$ and followed a $58^{\circ}$ slope trajectory from a height of 75 km down to 18.6 km. Despite the poor angle of triangulated planes between observatories (29$^{\circ}$) a…
▽ More
On the 19th June 2020 at 20:05:07 UTC, a fireball lasting 5.5 s was observed above Western Australia by three Desert Fireball Network observatories. The meteoroid entered the atmosphere with a speed of $14.00 \pm 0.17$ km s$^{-1}$ and followed a $58^{\circ}$ slope trajectory from a height of 75 km down to 18.6 km. Despite the poor angle of triangulated planes between observatories (29$^{\circ}$) and the large distance from the observatories, a well constrained kilo-size main mass was predicted to have fallen just South of Madura in Western Australia. However, the search area was predicted to be large due to the trajectory uncertainties. Fortunately, the rock was rapidly recovered along the access track during a reconnaissance trip. The 1.072 kg meteorite called Madura Cave was classified as an L5 ordinary chondrite. The calculated orbit is of Aten type (mostly contained within the Earth's orbit), the second time only a meteorite is observed on such an orbit after Bunburra Rockhole. Dynamical modelling shows that Madura Cave has been in near-Earth space for a very long time. The NEO dynamical lifetime for the progenitor meteoroid is predicted to be $\sim87$ Myr. This peculiar orbit also points to a delivery from the main asteroid belt via the $\nu6$ resonance, and therefore an origin in the inner belt. This result contributes to drawing a picture for the existence of a present-day L chondrite parent body in the inner belt.
△ Less
Submitted 14 February, 2022;
originally announced February 2022.
-
Failure Tolerance of the Human Lumbar Spine in Combined Compression and Flexion Loading
Authors:
S. K. Tushak,
J. P. Donlon,
B. D. Gepner,
A. Chebbi,
B. Pipkorn,
J. J. Hallman,
J. L. Forman,
J. R. Kerrigan
Abstract:
Vehicle safety systems have substantially decreased motor vehicle crash-related injuries and fatalities, but injuries to the lumbar spine still have been reported. Experimental and computational analyses of upright and, particularly, reclined occupants in frontal crashes have shown that the lumbar spine can be subjected to axial compression followed by combined compression-flexion loading. Lumbar…
▽ More
Vehicle safety systems have substantially decreased motor vehicle crash-related injuries and fatalities, but injuries to the lumbar spine still have been reported. Experimental and computational analyses of upright and, particularly, reclined occupants in frontal crashes have shown that the lumbar spine can be subjected to axial compression followed by combined compression-flexion loading. Lumbar spine failure tolerance in combined compression-flexion has not been widely explored in the literature. Therefore, the goal of this study was to measure the failure tolerance of the lumbar spine in combined compression and flexion. Forty 3-vertebra lumbar spine segments were pre-loaded with axial compression and then subjected to dynamic flexion bending until failure. Clinically relevant middle vertebra fractures were observed in twenty-one of the specimens, including compression and burst fractures. The remaining nineteen specimens experienced failure at the potting grip interface. Since specimen characteristics and pre-test axial load varied widely within the sample, failure forces (mean 3.4 kN, range 1.6-5.1 kN) and moments (mean 73 Nm, range 0-181 Nm) also varied widely. Tobit univariate regressions were performed to determine the relationship between censored failure tolerance and specimen sex, segment type (upper/lower), age, and cross-sectional area. Age, sex, and cross-sectional area significantly affected failure force and moment individually (p<0.0024). These data can be used to develop injury prediction tools for lumbar spine fractures and further research in future safety systems.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Murrili meteorite's fall and recovery from Kati Thanda
Authors:
E. K. Sansom,
P. A. Bland,
M. C. Towner,
H. A. R. D. Devillepoix,
M. Cupak,
R. M. Howie,
T. Jansen-Sturgeon,
M. A. Cox,
B. A. D. Hartig,
J. P. Paxman,
G. Benedix,
L. V. Forman
Abstract:
On the 27th of November 2015, at 10:43:45.526 UTC, a fireball was observed across South Australia by ten Desert Fireball Network observatories lasting 6.1 s. A $\sim37$ kg meteoroid entered the atmosphere with a speed of 13.68$\pm0.09\,\mbox{km s}^{-1}$ and was observed ablating from a height of 85 km down to 18 km, having slowed to 3.28$\pm0.21 \,\mbox{km s}^{-1}$. Despite the relatively steep 68…
▽ More
On the 27th of November 2015, at 10:43:45.526 UTC, a fireball was observed across South Australia by ten Desert Fireball Network observatories lasting 6.1 s. A $\sim37$ kg meteoroid entered the atmosphere with a speed of 13.68$\pm0.09\,\mbox{km s}^{-1}$ and was observed ablating from a height of 85 km down to 18 km, having slowed to 3.28$\pm0.21 \,\mbox{km s}^{-1}$. Despite the relatively steep 68.5$^\circ$ trajectory, strong atmospheric winds significantly influenced the darkfight phase and the predicted fall line, but the analysis put the fall site in the centre of Kati Thanda - Lake Eyre South. Kati Thanda has metres-deep mud under its salt-encrusted surface. Reconnaissance of the area where the meteorite landed from a low flying aircraft revealed a 60 cm circular feature in the muddy lake, less than 50 m from the predicted fall line. After a short search, which again employed light aircraft, the meteorite was recovered on the 31st December 2015 from a depth of 42 cm. Murrili is the first recovered observed fall by the digital Desert Fireball Network (DFN). In addition to its scientific value, connecting composition to solar system context via orbital data, the recover demonstrates and validates the capabilities of the DFN, with its next generation remote observatories and automated data reduction pipeline.
△ Less
Submitted 22 September, 2020; v1 submitted 12 June, 2020;
originally announced June 2020.
-
Accelerating delayed-acceptance Markov chain Monte Carlo algorithms
Authors:
Samuel Wiqvist,
Umberto Picchini,
Julie Lyng Forman,
Kresten Lindorff-Larsen,
Wouter Boomsma
Abstract:
Delayed-acceptance Markov chain Monte Carlo (DA-MCMC) samples from a probability distribution via a two-stages version of the Metropolis-Hastings algorithm, by combining the target distribution with a "surrogate" (i.e. an approximate and computationally cheaper version) of said distribution. DA-MCMC accelerates MCMC sampling in complex applications, while still targeting the exact distribution. We…
▽ More
Delayed-acceptance Markov chain Monte Carlo (DA-MCMC) samples from a probability distribution via a two-stages version of the Metropolis-Hastings algorithm, by combining the target distribution with a "surrogate" (i.e. an approximate and computationally cheaper version) of said distribution. DA-MCMC accelerates MCMC sampling in complex applications, while still targeting the exact distribution. We design a computationally faster, albeit approximate, DA-MCMC algorithm. We consider parameter inference in a Bayesian setting where a surrogate likelihood function is introduced in the delayed-acceptance scheme. When the evaluation of the likelihood function is computationally intensive, our scheme produces a 2-4 times speed-up, compared to standard DA-MCMC. However, the acceleration is highly problem dependent. Inference results for the standard delayed-acceptance algorithm and our approximated version are similar, indicating that our algorithm can return reliable Bayesian inference. As a computationally intensive case study, we introduce a novel stochastic differential equation model for protein folding data.
△ Less
Submitted 24 May, 2019; v1 submitted 15 June, 2018;
originally announced June 2018.
-
Bayesian inference for stochastic differential equation mixed effects models of a tumor xenography study
Authors:
Umberto Picchini,
Julie Lyng Forman
Abstract:
We consider Bayesian inference for stochastic differential equation mixed effects models (SDEMEMs) exemplifying tumor response to treatment and regrowth in mice. We produce an extensive study on how a SDEMEM can be fitted using both exact inference based on pseudo-marginal MCMC and approximate inference via Bayesian synthetic likelihoods (BSL). We investigate a two-compartments SDEMEM, these corre…
▽ More
We consider Bayesian inference for stochastic differential equation mixed effects models (SDEMEMs) exemplifying tumor response to treatment and regrowth in mice. We produce an extensive study on how a SDEMEM can be fitted using both exact inference based on pseudo-marginal MCMC and approximate inference via Bayesian synthetic likelihoods (BSL). We investigate a two-compartments SDEMEM, these corresponding to the fractions of tumor cells killed by and survived to a treatment, respectively. Case study data considers a tumor xenography study with two treatment groups and one control, each containing 5-8 mice. Results from the case study and from simulations indicate that the SDEMEM is able to reproduce the observed growth patterns and that BSL is a robust tool for inference in SDEMEMs. Finally, we compare the fit of the SDEMEM to a similar ordinary differential equation model. Due to small sample sizes, strong prior information is needed to identify all model parameters in the SDEMEM and it cannot be determined which of the two models is the better in terms of predicting tumor growth curves. In a simulation study we find that with a sample of 17 mice per group BSL is able to identify all model parameters and distinguish treatment groups.
△ Less
Submitted 17 February, 2019; v1 submitted 9 July, 2016;
originally announced July 2016.
-
Accelerating inference for diffusions observed with measurement error and large sample sizes using Approximate Bayesian Computation
Authors:
Umberto Picchini,
Julie Lyng Forman
Abstract:
In recent years dynamical modelling has been provided with a range of breakthrough methods to perform exact Bayesian inference. However it is often computationally unfeasible to apply exact statistical methodologies in the context of large datasets and complex models. This paper considers a nonlinear stochastic differential equation model observed with correlated measurement errors and an applicat…
▽ More
In recent years dynamical modelling has been provided with a range of breakthrough methods to perform exact Bayesian inference. However it is often computationally unfeasible to apply exact statistical methodologies in the context of large datasets and complex models. This paper considers a nonlinear stochastic differential equation model observed with correlated measurement errors and an application to protein folding modelling. An Approximate Bayesian Computation (ABC) MCMC algorithm is suggested to allow inference for model parameters within reasonable time constraints. The ABC algorithm uses simulations of "subsamples" from the assumed data generating model as well as a so-called "early rejection" strategy to speed up computations in the ABC-MCMC sampler. Using a considerate amount of subsamples does not seem to degrade the quality of the inferential results for the considered applications. A simulation study is conducted to compare our strategy with exact Bayesian inference, the latter resulting two orders of magnitude slower than ABC-MCMC for the considered setup. Finally the ABC algorithm is applied to a large size protein data. The suggested methodology is fairly general and not limited to the exemplified model and data.
△ Less
Submitted 22 December, 2014; v1 submitted 3 October, 2013;
originally announced October 2013.
-
Size-dependent same-material tribocharging in insulating grains
Authors:
Scott R. Waitukaitis,
Victor Lee,
James M. Pierson,
Steven L. Forman,
Heinrich M. Jaeger
Abstract:
Observations of flowing granular matter have suggested that same-material tribocharging de- pends on particle size, rendering large grains positive and small ones negative. Models assuming the transfer of trapped electrons can explain this, but so far have not been validated. Tracking individual grains in an electric field, we show quantitatively that charge is transferred based on size between ma…
▽ More
Observations of flowing granular matter have suggested that same-material tribocharging de- pends on particle size, rendering large grains positive and small ones negative. Models assuming the transfer of trapped electrons can explain this, but so far have not been validated. Tracking individual grains in an electric field, we show quantitatively that charge is transferred based on size between materially identical grains. However, the surface density of trapped electrons, measured independently by thermoluminescence techniques, is orders of magnitude too small to account for the scale of charge transferred. This suggests that another negatively charged species, such as ions, is responsible.
△ Less
Submitted 7 August, 2014; v1 submitted 10 September, 2013;
originally announced September 2013.
