-
Highly photo-stable, kHz-repetition-rate, diode pumped circulation-free liquid dye laser with thermal lens management
Authors:
A. Hamja,
R. Florentin,
S. Chénais,
Sebastien Forget
Abstract:
Liquid dye lasers have long been considered as ideal tunable laser sources in the visible range but are bulky, expensive, and require a complex system for dye circulation. Here, we present a system that relies on a low-cost blue laser diode as the pump source and a sealed dye cell with no flowing circuitry, resulting in a device that combines the convenience and size of a solid-state device with t…
▽ More
Liquid dye lasers have long been considered as ideal tunable laser sources in the visible range but are bulky, expensive, and require a complex system for dye circulation. Here, we present a system that relies on a low-cost blue laser diode as the pump source and a sealed dye cell with no flowing circuitry, resulting in a device that combines the convenience and size of a solid-state device with the stability of a liquid organic laser. A very high photo-stability is obtained (up to 1.2 x 10$^9$ pulses or 12 days at 1 kHz), which is five orders of magnitude higher than a solid-state dye laser operated in similar conditions. The number of pulses obtainable at low repetition rates is found to be limited by molecular self-diffusion and, hence, related to the total cuvette volume. In contrast, the repetition rate is limited to a few kHz, which suggests that thermal effects play a bigger role than triplet population effects. Thermal effects participate in the suppression of lasing through the buildup of a strong negative thermal lens; correcting the non-aberrant part of this thermal lens by resonator design enables the repetition rate to be pushed up to 14 kHz with possible further optimization. This work shows a route for building off-the-shelf, compact, low-cost, and convenient tunable pulsed lasers in the visible range that have superior stability over organic solid-state lasers.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Temporal dynamics of diode-pumped circulation-free liquid dye lasers
Authors:
A. Hamja,
S. Chénais,
Sebastien Forget
Abstract:
A highly stable diode-pumped circulation-free liquid dye laser in a vertical external cavity is reported. The design is simple (no fabrication process step required, no fluid circuitry), compact (~ cm sized), and cost-effective. An optical efficiency of 18% with a M${}^2$ of 1 are reported, with an excellent photostability-no efficiency drop was seen after 1.4 million pulses at 50 Hz, a value comp…
▽ More
A highly stable diode-pumped circulation-free liquid dye laser in a vertical external cavity is reported. The design is simple (no fabrication process step required, no fluid circuitry), compact (~ cm sized), and cost-effective. An optical efficiency of 18% with a M${}^2$ of 1 are reported, with an excellent photostability-no efficiency drop was seen after 1.4 million pulses at 50 Hz, a value comparable to flowing systems and much higher than values achievable with organic solid-state lasers. We show that thermal effects are central in the stability and also on the dynamics of this laser. The laser build-up and shutdown dynamics are studied in detail for different pump pulse durations/repetition rates; they reveal a pulse shortening with increasing pump pulse duration and repetition rate that are shown to be due to thermal lensing diffraction losses. This laser structure offers a very convenient and simple platform for testing or harvesting solution-processable gain materials.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Inkjet-printed vertically emitting solid-state organic lasers
Authors:
Oussama Mhibik,
Sébastien Chénais,
Sébastien Forget,
Christophe Defranoux,
Sébastien Sanaur
Abstract:
In this paper, we show that Inkjet Printing can be successfully applied to external-cavity vertically-emitting thin-film organic lasers, and can be used to generate a diffraction-limited output beam with an output energy as high as 33.6 uJ with a slope efficiency S of 34%. Laser emission shows to be continuously tunable from 570 to 670 nm using an intracavity polymer-based Fabry-Perot etalon. High…
▽ More
In this paper, we show that Inkjet Printing can be successfully applied to external-cavity vertically-emitting thin-film organic lasers, and can be used to generate a diffraction-limited output beam with an output energy as high as 33.6 uJ with a slope efficiency S of 34%. Laser emission shows to be continuously tunable from 570 to 670 nm using an intracavity polymer-based Fabry-Perot etalon. High-optical quality films with several um thicknesses are realized thanks to ink-jet printing. We introduce a new optical material where EMD6415 commercial ink constitutes the optical host matrix and exhibits a refractive index of 1.5 and an absorption coefficient of 0.66 cm-1 at 550-680 nm. Standard laser dyes like Pyromethene 597 and Rhodamine 640 are incorporated in solution to the EMD6415 ink. Such large size " printed pixels " of 50 mm 2 present uniform and flat surfaces, with roughness measured as low as 1.5 nm in different locations of a 50um x 50um AFM scan. Finally, as the gain capsules fabricated by Inkjet printing are simple and do not incorporate any tuning or cavity element, they are simple to make, have a negligible fabrication cost and can be used as fully disposable items. This works opens the way towards the fabrication of really low-cost tunable visible lasers with an affordable technology that has the potential to be widely disseminated.
△ Less
Submitted 25 May, 2016;
originally announced May 2016.
-
High brightness diode-pumped organic solid-state laser
Authors:
Zhuang Zhao,
Oussama Mhibik,
Malik Nafa,
Sébastien Chénais,
Sébastien Forget
Abstract:
High-power, diffraction-limited organic solid-state laser operation has been achieved in a vertical external cavity surface-emitting organic laser (VECSOL), pumped by a low-cost compact blue laser diode. The diode-pumped VECSOLs were demonstrated with various dyes in a polymer matrix, leading to laser emissions from 540 nm to 660 nm. Optimization of both the pump pulse duration and output coupling…
▽ More
High-power, diffraction-limited organic solid-state laser operation has been achieved in a vertical external cavity surface-emitting organic laser (VECSOL), pumped by a low-cost compact blue laser diode. The diode-pumped VECSOLs were demonstrated with various dyes in a polymer matrix, leading to laser emissions from 540 nm to 660 nm. Optimization of both the pump pulse duration and output coupling leads to a pump slope efficiency of 11% for a DCM based VECSOLs. We report output pulse energy up to 280 nJ with 100 ns long pump pulses, leading to a peak power of 3.5 W in a circularly symmetric, diffraction-limited beam.
△ Less
Submitted 24 February, 2015;
originally announced February 2015.
-
White organic light-emitting diodes with an ultra-thin premixed emitting layer
Authors:
T. Jeon,
Bernard Geffroy,
Denis Tondelier,
Yvan Bonnassieux,
Sebastien Forget,
Sebastien Chenais,
Elena Ishow
Abstract:
We described an approach to achieve fine color control of fluorescent White Organic Light-Emitting Diodes (OLED), based on an Ultra-thin Premixed emitting Layer (UPL). The UPL consists of a mixture of two dyes (red-emitting 4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene or fvin and green-emitting 4-di(4'-tert-butylbiphenyl-4-yl)aminobenzaldehyde or fcho) premixed in a single evaporat…
▽ More
We described an approach to achieve fine color control of fluorescent White Organic Light-Emitting Diodes (OLED), based on an Ultra-thin Premixed emitting Layer (UPL). The UPL consists of a mixture of two dyes (red-emitting 4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene or fvin and green-emitting 4-di(4'-tert-butylbiphenyl-4-yl)aminobenzaldehyde or fcho) premixed in a single evaporation cell: since these two molecules have comparable structures and similar melting temperatures, a blend can be evaporated, giving rise to thin films of identical and reproducible composition compared to those of the pre-mixture. The principle of fine color tuning is demonstrated by evaporating a 1-nm-thick layer of this blend within the hole-transport layer (4,4'-bis[N-(1-naphtyl)-N-phenylamino]biphenyl (α-NPB)) of a standard fluorescent OLED structure. Upon playing on the position of the UPL inside the hole-transport layer, as well as on the premix composition, two independent parameters are available to finely control the emitted color. Combined with blue emission from the heterojunction, white light with Commission Internationale de l'Eclairage 1931 color coordinates (0.34, 0.34) was obtained, with excellent color stability with the injected current. The spectrum reveals that the fcho material does not emit light due to efficient energy transfer to the red-emitting fvin compound but plays the role of a host matrix for fvin, allowing for a very precise adjustment of the red dopant amount in the device.
△ Less
Submitted 12 May, 2014;
originally announced May 2014.
-
Broadly tunable (440-670 nm) solid-state organic laser with disposable capsules
Authors:
Oussama Mhibik,
Tatiana Leang,
Alain Siove,
Sebastien Forget,
Sébastien Chenais
Abstract:
An innovative concept of thin-film organic solid-state laser is proposed, with diffraction-limited output and a broad tuning range covering the visible spectrum under UV optical pum**. The laser beam is tunable over 230 nm, from 440 to 670 nm, with a 3 nm full width at half maximum typical spectral width. The structure consists of a compact fixed bulk optical cavity, a polymeric intracavity etal…
▽ More
An innovative concept of thin-film organic solid-state laser is proposed, with diffraction-limited output and a broad tuning range covering the visible spectrum under UV optical pum**. The laser beam is tunable over 230 nm, from 440 to 670 nm, with a 3 nm full width at half maximum typical spectral width. The structure consists of a compact fixed bulk optical cavity, a polymeric intracavity etalon for wavelength tuning, as well as five different disposable glass slides coated with a dye-doped polymer film, forming a very simple and low-cost gain medium. The use of interchangeable/disposable "gain capsules" is an alternative solution to photodegradation issues, since gain chips can be replaced without realignment of the cavity. The laser lifetime of a single chip in ambient conditions and without encapsulation was extrapolated to be around 107 pulses at a microjoule energy-per-pulse level.
△ Less
Submitted 7 May, 2014;
originally announced May 2014.
-
Gain properties of dye-doped polymer thin films
Authors:
I. Gozhyk,
M. Boudreau,
H. Rabbani Haghighi,
N. Djellali,
S. Forget,
S. Chenais,
C. Ulysse,
A. Brosseau,
S. Gauvin,
J. Zyss,
M. Lebental
Abstract:
Hybrid pum** appears as a promising compromise in order to reach the much coveted goal of an electrically pumped organic laser. In such configuration the organic material is optically pumped by an electrically pumped inorganic device on chip. This engineering solution requires therefore an optimization of the organic gain medium under optical pum**. Here, we report a detailed study of the gain…
▽ More
Hybrid pum** appears as a promising compromise in order to reach the much coveted goal of an electrically pumped organic laser. In such configuration the organic material is optically pumped by an electrically pumped inorganic device on chip. This engineering solution requires therefore an optimization of the organic gain medium under optical pum**. Here, we report a detailed study of the gain features of dye-doped polymer thin films. In particular we introduce the gain efficiency $K$, in order to facilitate comparison between different materials and experimental conditions. The gain efficiency was measured with various setups (pump-probe amplification, variable stripe length method, laser thresholds) in order to study several factors which modify the actual gain of a layer, namely the confinement factor, the pump polarization, the molecular anisotropy, and the re-absorption. For instance, for a 600 nm thick 5 wt\% DCM doped PMMA layer, the different experimental approaches give a consistent value $K\simeq$ 80 cm.MW$^{-1}$. On the contrary, the usual model predicting the gain from the characteristics of the material leads to an overestimation by two orders of magnitude, which raises a serious problem in the design of actual devices. In this context, we demonstrate the feasibility to infer the gain efficiency from the laser threshold of well-calibrated devices. Besides, temporal measurements at the picosecond scale were carried out to support the analysis.
△ Less
Submitted 15 July, 2015; v1 submitted 28 March, 2014;
originally announced March 2014.
-
An insight into polarization states of solid-state organic lasers
Authors:
I. Gozhyk,
G. Clavier,
R. Meallet-Renault,
M. Dvorko,
R. Pansu,
J. -F. Audibert,
A. Brosseau,
C. Lafargue,
V. Tsvirkun,
S. Lozenko,
S. Forget,
S. Chenais,
C. Ulysse,
J. Zyss,
M. Lebental
Abstract:
The polarization states of lasers are crucial issues both for practical applications and fundamental research. In general, they depend in a combined manner on the properties of the gain material and on the structure of the electromagnetic modes. In this paper, we address this issue in the case of solid-state organic lasers, a technology which enables to vary independently gain and mode properties.…
▽ More
The polarization states of lasers are crucial issues both for practical applications and fundamental research. In general, they depend in a combined manner on the properties of the gain material and on the structure of the electromagnetic modes. In this paper, we address this issue in the case of solid-state organic lasers, a technology which enables to vary independently gain and mode properties. Different kinds of resonators are investigated: in-plane micro-resonators with Fabry-Perot, square, pentagon, stadium, disk, and kite shapes, and external vertical resonators. The degree of polarization P is measured in each case. It is shown that although TE modes prevail generally (P>0), kite-shaped micro-laser generates negative values for P, i.e. a flip of the dominant polarization which becomes mostly TM polarized. We at last investigated two degrees of freedom that are available to tailor the polarization of organic lasers, in addition to the pump polarization and the resonator geometry: upon using resonant energy transfer (RET) or upon pum** the laser dye to an higher excited state. We then demonstrate that significantly lower P factors can be obtained.
△ Less
Submitted 19 October, 2012; v1 submitted 20 July, 2012;
originally announced July 2012.
-
Recent advances in solid-state organic lasers
Authors:
Sébastien Chenais,
Sebastien Forget
Abstract:
Organic solid-state lasers are reviewed, with a special emphasis on works published during the last decade. Referring originally to dyes in solid-state polymeric matrices, organic lasers also include the rich family of organic semiconductors, paced by the rapid development of organic light emitting diodes. Organic lasers are broadly tunable coherent sources are potentially compact, convenient and…
▽ More
Organic solid-state lasers are reviewed, with a special emphasis on works published during the last decade. Referring originally to dyes in solid-state polymeric matrices, organic lasers also include the rich family of organic semiconductors, paced by the rapid development of organic light emitting diodes. Organic lasers are broadly tunable coherent sources are potentially compact, convenient and manufactured at low-costs. In this review, we describe the basic photophysics of the materials used as gain media in organic lasers with a specific look at the distinctive feature of dyes and semiconductors. We also outline the laser architectures used in state-of-the-art organic lasers and the performances of these devices with regard to output power, lifetime, and beam quality. A survey of the recent trends in the field is given, highlighting the latest developments in terms of wavelength coverage, wavelength agility, efficiency and compactness, or towards integrated low-cost sources, with a special focus on the great challenges remaining for achieving direct electrical pum**. Finally, we discuss the very recent demonstration of new kinds of organic lasers based on polaritons or surface plasmons, which open new and very promising routes in the field of organic nanophotonics.
△ Less
Submitted 24 November, 2011;
originally announced November 2011.
-
Tunable Ultraviolet Vertically-emitting Organic Laser
Authors:
Sebastien Forget,
Hadi Rabbani-Haghighi,
Nordine Diffalah,
Alain Siove,
Sebastien Chenais
Abstract:
A solid-state organic thin-film laser with intracavity frequency doubling is reported. Tunable ultraviolet emission from 309 to 322 nm is achieved from a vertical external cavity surface-emitting organic laser, with 2 % efficiency (1 $μ$J at 315 nm). The laser comprises a polymethyl(methacrylate) layer doped with Rhodamine 640, spun-cast onto a plane mirror, a remote concave mirror, a nonlinear cr…
▽ More
A solid-state organic thin-film laser with intracavity frequency doubling is reported. Tunable ultraviolet emission from 309 to 322 nm is achieved from a vertical external cavity surface-emitting organic laser, with 2 % efficiency (1 $μ$J at 315 nm). The laser comprises a polymethyl(methacrylate) layer doped with Rhodamine 640, spun-cast onto a plane mirror, a remote concave mirror, a nonlinear crystal and a dichroic separator. The output is spectrally narrow (<0.5 nm FWHM) and tunable through phase-matching selection of the fundamental radiation lasing modes. These results highlight a low-cost and portable alternative to tunable UV laser sources, useful for spectroscopic applications.
△ Less
Submitted 9 March, 2011;
originally announced March 2011.
-
Red-emitting fluorescent Organic Light emitting Diodes with low sensitivity to self-quenching
Authors:
Sebastien Forget,
Sebastien Chenais,
Denis Tondelier,
Bernard Geffroy,
Iryna Gozhyk,
Mélanie Lebental,
Elena Ishow
Abstract:
Concentration quenching is a major impediment to efficient organic light-emitting devices. We herein report on Organic Light-Emitting Diodes (OLEDs) based on a fluorescent amorphous red-emitting starbust triarylamine molecule (4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene, named FVIN), exhibiting a very small sensitivity to concentration quenching. OLEDs are fabricated with various…
▽ More
Concentration quenching is a major impediment to efficient organic light-emitting devices. We herein report on Organic Light-Emitting Diodes (OLEDs) based on a fluorescent amorphous red-emitting starbust triarylamine molecule (4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene, named FVIN), exhibiting a very small sensitivity to concentration quenching. OLEDs are fabricated with various do** levels of FVIN into Alq3, and show a remarkably stable external quantum efficiency of 1.5% for do** rates ranging from 5% up to 40%, which strongly relaxes the technological constraints on the do** accuracy. An efficiency of 1% is obtained for a pure undoped active region, along with deep red emission (x=0.6; y=0.35 CIE coordinates). A comparison of FVIN with the archetypal DCM dye is presented in an identical multilayer OLED structure.
△ Less
Submitted 23 September, 2010;
originally announced September 2010.
-
Highly-efficient, diffraction-limited laser emission from a Vertical External Cavity Surface-emitting Organic Laser
Authors:
Hadi Rabbani-Haghighi,
Sebastien Forget,
Sebastien Chenais,
Alain Siove
Abstract:
We report on a solid-state laser structure being the organic counterpart of the Vertical External-Cavity Surface-Emitting Laser (VECSEL) design. The gain medium is a poly (methyl methacrylate) film doped with Rhodamine 640, spin-casted onto the High-Reflectivity mirror of a plano-concave resonator. Upon pum** by 7-ns pulses at 532 nm, a diffraction-limited beam (M^2=1) was obtained, with a conve…
▽ More
We report on a solid-state laser structure being the organic counterpart of the Vertical External-Cavity Surface-Emitting Laser (VECSEL) design. The gain medium is a poly (methyl methacrylate) film doped with Rhodamine 640, spin-casted onto the High-Reflectivity mirror of a plano-concave resonator. Upon pum** by 7-ns pulses at 532 nm, a diffraction-limited beam (M^2=1) was obtained, with a conversion efficiency of 43%; higher peak powers (2kW) could be attained when resorting to shorter (0.5 ns) pump pulses. The spectrum was controlled by the thickness of the active layer playing the role of an intracavity etalon; tunability is demonstrated over up to 20 nm.
△ Less
Submitted 6 June, 2010;
originally announced June 2010.
-
Gain measurement and low-threshold laser operation in non-doped thin films made of a small-molecule organic red-emitter
Authors:
Hadi Rabbani-Haghighi,
Sebastien Forget,
Sebastien Chenais,
Alain Siove,
Marie-Claude Castex,
Elena Ishow
Abstract:
Stimulated emission in small-molecule organic films at a high dye concentration is generally hindered by fluorescence quenching, especially in the red region of the spectrum. Here we demonstrate the achievement of high net gains (up to 50 cm-1) around 640 nm in thermally evaporated non-doped films of 4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene, which makes this material suitable…
▽ More
Stimulated emission in small-molecule organic films at a high dye concentration is generally hindered by fluorescence quenching, especially in the red region of the spectrum. Here we demonstrate the achievement of high net gains (up to 50 cm-1) around 640 nm in thermally evaporated non-doped films of 4-di(4'-tert-butylbiphenyl-4-yl)amino-4'-dicyanovinylbenzene, which makes this material suitable for green-light pumped single-mode organic lasers with low threshold and superior stability. Lasing effect is demonstrated in a DBR resonator configuration, as well as under the form of random lasing at high pump intensities.
△ Less
Submitted 15 July, 2009; v1 submitted 28 June, 2009;
originally announced June 2009.
-
Comment on " Gain coefficient method for amplified spontaneous emission in thin waveguided film of a conjugated polymer " [APL 93, 163307 (2008)]
Authors:
Sebastien Chenais,
Sebastien Forget
Abstract:
Comment on " Gain coefficient method for amplified spontaneous emission in thin waveguided film of a conjugated polymer " [APL 93, 163307 (2008)]
Comment on " Gain coefficient method for amplified spontaneous emission in thin waveguided film of a conjugated polymer " [APL 93, 163307 (2008)]
△ Less
Submitted 24 February, 2009;
originally announced February 2009.
-
Diffusion of triplet excitons in an operational Organic Light Emitting Diode
Authors:
M. Lebental,
H. Choukri,
S. Chénais,
S. Forget,
A. Siove,
B. Geffroy,
E. Tutis
Abstract:
Measurements of the diffusion length L for triplet excitons in small molecular-weight organic semiconductors are commonly carried out using a technique in which a phosphorescent-doped probe layer is set in the vicinity of a supposed exciton generation zone. However, analyses commonly used to retrieve $L$ ignore microcavity effects that may induce a strong modulation of the emitted light as the p…
▽ More
Measurements of the diffusion length L for triplet excitons in small molecular-weight organic semiconductors are commonly carried out using a technique in which a phosphorescent-doped probe layer is set in the vicinity of a supposed exciton generation zone. However, analyses commonly used to retrieve $L$ ignore microcavity effects that may induce a strong modulation of the emitted light as the position of the exciton probe is shifted. The present paper investigates in detail how this technique may be improved to obtain more accurate results for L. The example of 4,4'-bis(carbazol-9-yl)1,1'-biphenyl (CBP) is taken, for which a triplet diffusion length of L=16 +/- 4 nm (at 3 mA/cm2) is inferred from experiments. The influence of triplet-triplet annihilation, responsible for an apparent decrease of L at high current densities, is theoretically investigated, as well as the 'invasiveness' of the thin probe layer on the exciton distribution. The interplay of microcavity effects and direct recombinations is demonstrated experimentally with the archetypal trilayer structure [N,N'-bis(naphthalen-1-yl)-N,N'-bis(phenyl)]-4,4'-diaminobiphenyl (NPB)/CBP/ 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (named bathocuproine, BCP). It is shown that in this device holes do cross the NPB/CBP junction, without the assistance of electrons and despite the high energetic barrier imposed by the shift between the HOMO levels. The use of the variable-thickness doped layer technique in this case is then discussed. Finally, some guidelines are given for improving the measure of the diffusion length of triplet excitons in operational OLEDs, applicable to virtually any small molecular-weight material.
△ Less
Submitted 18 February, 2009;
originally announced February 2009.
-
Enhanced generation of VUV radiation by four-wave mixing in mercury using pulsed laser vaporization
Authors:
Sebastien Chenais,
Sebastien Forget,
Laurent Philippet,
Marie-Claude Castex
Abstract:
The efficiency of a coherent VUV source at 125 nm, based on 2-photon resonant four-wave mixing in mercury vapor, has been enhanced by up to 2 orders of magnitude. This enhancement was obtained by locally heating a liquid Hg surface with a pulsed excimer laser, resulting in a high density vapor plume in which the nonlinear interaction occurred. Energies up to 5 μJ (1 kW peak power) have been…
▽ More
The efficiency of a coherent VUV source at 125 nm, based on 2-photon resonant four-wave mixing in mercury vapor, has been enhanced by up to 2 orders of magnitude. This enhancement was obtained by locally heating a liquid Hg surface with a pulsed excimer laser, resulting in a high density vapor plume in which the nonlinear interaction occurred. Energies up to 5 μJ (1 kW peak power) have been achieved while kee** the overall Hg cell at room temperature, avoiding the use of a complex heat pipe. We have observed a strong saturation of the VUV yield when peak power densities of the fundamental beams exceed the GW/cm2 range, as well as a large intensity-dependant broadening (up to ~30 cm-1) of the two-photon resonance. The source has potential applications for high resolution interference lithography and photochemistry.
△ Less
Submitted 23 May, 2007;
originally announced May 2007.
-
On thermal effects in solid state lasers: the case of ytterbium-doped materials
Authors:
Sebastien Chenais,
Frederic Druon,
Sebastien Forget,
Francois Balembois,
Patrick Georges
Abstract:
A review of theoretical and experimental studies of thermal effects in solid-state lasers is presented, with a special focus on diode-pumped ytterbium-doped materials. A large part of this review provides however general information applicable to any kind of solid-state laser. Our aim here is not to make a list of the techniques that have been used to minimize thermal effects, but instead to giv…
▽ More
A review of theoretical and experimental studies of thermal effects in solid-state lasers is presented, with a special focus on diode-pumped ytterbium-doped materials. A large part of this review provides however general information applicable to any kind of solid-state laser. Our aim here is not to make a list of the techniques that have been used to minimize thermal effects, but instead to give an overview of the theoretical aspects underneath, and give a state-of-the-art of the tools at the disposal of the laser scientist to measure thermal effects. After a presentation of some general properties of Yb-doped materials, we address the issue of evaluating the temperature map in Yb-doped laser crystals, both theoretically and experimentally. This is the first step before studying the complex problem of thermal lensing (part III). We will focus on some newly discussed aspects, like the definition of the thermo-optic coefficient: we will highlight some misleading interpretations of thermal lensing experiments due to the use of the dn/dT parameter in a context where it is not relevant. Part IV will be devoted to a state-of-the-art of experimental techniques used to measure thermal lensing. Eventually, in part V, we will give some concrete examples in Yb-doped materials, where their peculiarities will be pointed out.
△ Less
Submitted 5 April, 2007;
originally announced April 2007.
-
Doped and non-doped organic light-emitting diodes based on a yellow carbazole emitter into a blue-emitting matrix
Authors:
Hakim Choukri,
Alexis Fischer,
Sebastien Forget,
Sebastien Chenais,
Marie-Claude Castex,
Bernard Geffroy,
Dominique Ades,
Alain Siove
Abstract:
A new carbazole derivative with a 3,3'-bicarbazyl core 6,6'-substituted by dicyanovinylene groups (6,6'-bis(1-(2,2'-dicyano)vinyl)-N,N'-dioctyl-3,3'-bicarbazyl; named (OcCz2CN)2, was synthesized by carbonyl-methylene Knovenagel condensation, characterized and used as a component of multilayer organic light-emitting diodes (OLEDs). Due to its -donor-acceptor type structure, (OcCz2CN)2 was…
▽ More
A new carbazole derivative with a 3,3'-bicarbazyl core 6,6'-substituted by dicyanovinylene groups (6,6'-bis(1-(2,2'-dicyano)vinyl)-N,N'-dioctyl-3,3'-bicarbazyl; named (OcCz2CN)2, was synthesized by carbonyl-methylene Knovenagel condensation, characterized and used as a component of multilayer organic light-emitting diodes (OLEDs). Due to its -donor-acceptor type structure, (OcCz2CN)2 was found to emit a yellow light at max=590 nm (with the CIE coordinates x=0.51; y = 0.47) and was used either as a dopant or as an ultra-thin layer in a blue-emitting matrix of 4,4'-bis(2,2'-diphenylvinyl)-1,1'-biphenyl (DPVBi). DPVBi (OcCz2CN)2-doped structure exhibited, at do** ratio of 1.5 weight %, a yellowish-green light with the CIE coordinates (x = 0.31; y = 0.51), an electroluminescence efficiency EL=1.3 cd/A, an external quantum efficiency ext= 0.4 % and a luminance L= 127 cd/m2 (at 10 mA/cm2) whereas for non-doped devices utilizing the carbazolic fluorophore as a thin neat layer, a warm white with CIE coordinates (x = 0.40; y= 0.43), EL= 2.0 cd/A, ext= 0.7 %, L = 197 cd/m2 (at 10 mA/cm2) and a color rendering index (CRI) of 74, were obtained. Electroluminescence performances of both the doped and non-doped devices were compared with those obtained with 5,6,11,12-tetraphenylnaphtacene (rubrene) taken as a reference of highly efficient yellow emitter.
△ Less
Submitted 28 March, 2007; v1 submitted 19 January, 2007;
originally announced January 2007.
-
Picosecond laser source at 1 MHz with continuous tunability in the visible red band
Authors:
Sebastien Forget,
Francois Balembois,
Gaelle Lucas-Leclin,
Patrick Georges
Abstract:
We report the first demonstration to our knowledge of a continuously tunable picosecond laser operating around 1 MHz. The emission can be tuned from 640 to 685 nm and the repetition rate from 200 kHz to 1 MHz with a pulse duration of less than 200 ps. The system is based on a Nd:YVO4 passively Q-switched microchip laser providing a few tens of nJ per pulse. Two cascaded stages of amplification a…
▽ More
We report the first demonstration to our knowledge of a continuously tunable picosecond laser operating around 1 MHz. The emission can be tuned from 640 to 685 nm and the repetition rate from 200 kHz to 1 MHz with a pulse duration of less than 200 ps. The system is based on a Nd:YVO4 passively Q-switched microchip laser providing a few tens of nJ per pulse. Two cascaded stages of amplification are then used to increase the pulse energy to several microJ . The frequency doubled radiation is then used to pump a periodically-poled-niobate-lithium (PPLN)-based optical parametric generator in an all-solid-state architecture. 20 nJ of tunable signal radiation are obtained. We also demonstrated 300-ps pulses generation in the UV (355 nm) at 1 MHz.
△ Less
Submitted 10 October, 2006;
originally announced October 2006.
-
New 3D multipass amplifier based on Nd:YAG or Nd:YVO4 crystals
Authors:
Sebastien Forget,
Francois Balembois,
Pierre-Jean Devilder,
Patrick Georges
Abstract:
We report on new simple and efficient multipass amplifiers using prisms or corner cubes to perform several passes in different planes of incidence. This scheme provides an optimized overlap between the signal passes and the pumped volume. We investigated our amplification geometry with Nd:YAG and Nd: YVO4 crystals : the use of a low doped (0.3%) Nd:YVO4 crystal allowed better thermal behaviour a…
▽ More
We report on new simple and efficient multipass amplifiers using prisms or corner cubes to perform several passes in different planes of incidence. This scheme provides an optimized overlap between the signal passes and the pumped volume. We investigated our amplification geometry with Nd:YAG and Nd: YVO4 crystals : the use of a low doped (0.3%) Nd:YVO4 crystal allowed better thermal behaviour and higher performances. We amplified a pulsed microlaser (110 mW of average power at 1064 nm) and obtained a diffraction-limited output beam with an average power of 5.7 W for 15 W of pump power and a small-signal gain of 56 dB in a 6-pass configuration.
△ Less
Submitted 10 October, 2006;
originally announced October 2006.
-
Passively mode-locked diode-pumped Nd:YVO4 oscillator operating at ultra-low repetition rate
Authors:
Dimitris N. Papadopoulos,
Sebastien Forget,
M. Delaigue,
Frederic Druon,
Francois Balembois,
Patrick Georges
Abstract:
We demonstrate the operation of an ultra low repetition rate, high peak power, picosecond diode pumped Nd:YVO4 passively mode locked laser oscillator. Repetition rates even below 1 MHz were achieved with the use of a new design multiple-pass cavity and a semiconductor saturable absorber. Long term stable operation at 1.2 MHz, pulse duration of 16.3 ps and average output power of 470 mW correspon…
▽ More
We demonstrate the operation of an ultra low repetition rate, high peak power, picosecond diode pumped Nd:YVO4 passively mode locked laser oscillator. Repetition rates even below 1 MHz were achieved with the use of a new design multiple-pass cavity and a semiconductor saturable absorber. Long term stable operation at 1.2 MHz, pulse duration of 16.3 ps and average output power of 470 mW corresponding to 24 KW peak power pulses is reported. This is, to our knowledge, the lowest repetition rate high peak power pulses ever generated directly from a picosecond laser resonator without cavity dum**.
△ Less
Submitted 10 October, 2006;
originally announced October 2006.
-
Direct and absolute temperature map** and heat transfer measurements in diode-end-pumped Yb:YAG
Authors:
Sebastien Chenais,
Sebastien Forget,
Frederic Druon,
Francois Balembois,
Patrick Georges
Abstract:
We report direct and absolute temperature measurements in a diode-end-pumped Yb:YAG crystal, using a calibrated infrared camera, with a 60-$μ$m spatial resolution. The heat transfer coefficient has been measured, for the first time to our knowledge, with four different types of thermal contact (H = 0.25, 0.28, 0.9 and 2.0 for bare contact, graphite layer, indium foil and heat sink grease respect…
▽ More
We report direct and absolute temperature measurements in a diode-end-pumped Yb:YAG crystal, using a calibrated infrared camera, with a 60-$μ$m spatial resolution. The heat transfer coefficient has been measured, for the first time to our knowledge, with four different types of thermal contact (H = 0.25, 0.28, 0.9 and 2.0 for bare contact, graphite layer, indium foil and heat sink grease respectively). The dynamics of thermal effects is also presented.
△ Less
Submitted 10 October, 2006;
originally announced October 2006.
-
High power spatial single-mode quantum cascade lasers at 8.9 $μ$m
Authors:
Sebastien Forget,
Clement Faugeras,
Jean Yves Bengloan,
Michel Calligaro,
Olivier Parillaud,
Marcella Giovannini,
Jerome Faist,
Carlo Sirtori
Abstract:
High performance of InP-based quantum cascade lasers emitting at $λ$ ~ 9$μ$m are reported. Thick electroplated gold layer was deposited on top of the laser to improve heat dissipation. With one facet high reflection coated, the devices produce a maximum output power of 175mW at 40% duty cycle at room temperature and continuous-wave operation up to 278K.
High performance of InP-based quantum cascade lasers emitting at $λ$ ~ 9$μ$m are reported. Thick electroplated gold layer was deposited on top of the laser to improve heat dissipation. With one facet high reflection coated, the devices produce a maximum output power of 175mW at 40% duty cycle at room temperature and continuous-wave operation up to 278K.
△ Less
Submitted 29 September, 2006;
originally announced September 2006.
-
Passively Q-switched diode-pumped Cr4+:YAG/Nd3+:GdVO4 monolithic microchip laser
Authors:
Sebastien Forget,
Frederic Druon,
Francois Balembois,
Patrick Georges,
Nicolas Landru,
Jean Philippe Feve,
Jiali Lin,
Zhiming Weng
Abstract:
the realization of high repetition rate passively Q-switched monolithic microlaser is a challenge since a decade. To achieve this goal, we report here on the first passively Q-switched diode-pumped microchip laser based on the association of a Nd:GdVO4 crystal and a Cr4+:YAG saturable absorber. The monolithic design consists of 1 mm long 1% doped Nd:GdVO4 optically contacted on a 0.4 mm long Cr4…
▽ More
the realization of high repetition rate passively Q-switched monolithic microlaser is a challenge since a decade. To achieve this goal, we report here on the first passively Q-switched diode-pumped microchip laser based on the association of a Nd:GdVO4 crystal and a Cr4+:YAG saturable absorber. The monolithic design consists of 1 mm long 1% doped Nd:GdVO4 optically contacted on a 0.4 mm long Cr4+:YAG leading to a plano-plano cavity. A repetition rate as high as 85 kHz is achieved. The average output power is approximately 400 mW for 2.2 W of absorbed pump power and the pulse length is 1.1 ns.
△ Less
Submitted 29 September, 2006;
originally announced September 2006.
-
White Organic Light-Emitting Diodes with fine chromaticity tuning via ultrathin layer position shifting
Authors:
Hakim Choukri,
Alexis Fischer,
Sebastien Forget,
Sebastien Chenais,
Marie-Claude Castex,
Dominique Ades,
Alain Siove,
Bernard Geffroy
Abstract:
Non-doped white organic light-emitting diodes using an ultrathin yellow-emitting layer of rubrene (5,6,11,12-tetraphenylnaphtacene) inserted on either side of the interface between a hole-transporting NPB (4,4'-bis[N-(1-naphtyl)-N-phenylamino]biphenyl) layer and a blue-emitting DPVBi (4,4'-bis(2,2'-diphenylvinyl)-1,1'-biphenyl) layer are described. Both the thickness and the position of the rubr…
▽ More
Non-doped white organic light-emitting diodes using an ultrathin yellow-emitting layer of rubrene (5,6,11,12-tetraphenylnaphtacene) inserted on either side of the interface between a hole-transporting NPB (4,4'-bis[N-(1-naphtyl)-N-phenylamino]biphenyl) layer and a blue-emitting DPVBi (4,4'-bis(2,2'-diphenylvinyl)-1,1'-biphenyl) layer are described. Both the thickness and the position of the rubrene layer allow fine chromaticity tuning from deep-blue to pure-yellow via bright-white with CIE coordinates (x= 0.33, y= 0.32), a external quantum efficiency of 1.9%, and a color rendering index of 70. Such a structure also provides an accurate sensing tool to measure the exciton diffusion length in both DPVBi and NPB (8.7 and 4.9 nm respectively).
△ Less
Submitted 27 September, 2006;
originally announced September 2006.
-
Enhanced production of coherent pulsed radiation at 125 nm: the route towards a tabletop VUV laser
Authors:
Sebastien Chenais,
Sebastien Forget,
Marie-Claude Castex
Abstract:
A novel approach is used to enhance by nearly two orders of magnitude the conversion efficiency of a 125 nm-coherent source, based on four-wave mixing in room-temperature mercury vapor. Saturation issues are observed and discussed.
A novel approach is used to enhance by nearly two orders of magnitude the conversion efficiency of a 125 nm-coherent source, based on four-wave mixing in room-temperature mercury vapor. Saturation issues are observed and discussed.
△ Less
Submitted 7 April, 2006;
originally announced April 2006.
-
Highly efficient multilayer organic pure-blue-light emitting diodes with substituted carbazoles compounds in the emitting layer
Authors:
Alexis Fischer,
Sebastien Forget,
Sebastien Chenais,
Marie-Claude Castex,
Alain Siove,
Dominique Ades,
Bernard Geffroy,
Christine Denis,
Pascal Maisse
Abstract:
Bright blue organic light-emitting diodes (OLEDs) based on 1,4,5,8,N-pentamethylcarbazole (PMC) and on dimer of N-ethylcarbazole (N,N'-diethyl-3,3'-bicarbazyl) (DEC) as emitting layers or as dopants in a 4,4'-bis(2,2'-diphenylvinyl)-1,1'-biphenyl (DPVBi) matrix are described. Pure blue-light with the C.I.E. coordinates x = 0.153 y = 0.100, electroluminescence efficiency η_{EL} of 0.4 cd/A, exter…
▽ More
Bright blue organic light-emitting diodes (OLEDs) based on 1,4,5,8,N-pentamethylcarbazole (PMC) and on dimer of N-ethylcarbazole (N,N'-diethyl-3,3'-bicarbazyl) (DEC) as emitting layers or as dopants in a 4,4'-bis(2,2'-diphenylvinyl)-1,1'-biphenyl (DPVBi) matrix are described. Pure blue-light with the C.I.E. coordinates x = 0.153 y = 0.100, electroluminescence efficiency η_{EL} of 0.4 cd/A, external quantum efficiency η_{ext.} of 0.6% and luminance L of 236 cd/m2 (at 60 mA/cm2) were obtained with PMC as an emitter and the 2,9-dimethyl-4,7-diphenyl-1,10-phenantroline (BCP) as a hole-blocking material in five-layer emitting devices. The highest efficiencies η_{EL.} of 4.7 cd/A, and η_{ext} = 3.3% were obtained with a four-layer structure and a DPVBi DEC-doped active layer (CIE coordinates x = 0.158, y=0.169, λ_{peak} = 456 nm). The η_{ext.} value is one the highest reported at this wavelength for blue OLEDs and is related to an internal quantum efficiency up to 20%.
△ Less
Submitted 6 April, 2006;
originally announced April 2006.
