-
Performance of large-scale 6Li-doped pulse-shape discriminating plastic scintillators
Authors:
C. Roca,
N. S. Bowden,
L. Carman,
S. A. Dazeley,
S. R. Durham,
O. M. Falana,
M. J. Ford,
A. M. Glenn,
C. Hurlbut,
V. A. Li,
M. P. Mendenhall,
K. Shipp,
F. Sutanto,
N. P. Zaitseva
Abstract:
A $^6$Li-doped plastic scintillator with pulse-shape discrimination capabilities, commercially identified as EJ-299-50, has been developed and produced at the kilogram-scale. A total of 44 kg-scale bars of dimensions 5.5 cm $\times$ 5.5 cm $\times$ 50 cm of this material have been characterized. Optical properties like light output and effective attenuation length have been found to be comparable…
▽ More
A $^6$Li-doped plastic scintillator with pulse-shape discrimination capabilities, commercially identified as EJ-299-50, has been developed and produced at the kilogram-scale. A total of 44 kg-scale bars of dimensions 5.5 cm $\times$ 5.5 cm $\times$ 50 cm of this material have been characterized. Optical properties like light output and effective attenuation length have been found to be comparable to $^6$Li-doped liquid scintillators. The scintillator EJ-299-50 shows good neutron detection capabilities with an effective efficiency for capture on $^6$Li of approximately 85%. Stability tests performed on two formulation variations showed no intrinsic degradation in the material or optical properties during several months of observations.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Reliable density functional and G_0 W_0 approaches to the calculation of bandgaps in 2D materials
Authors:
Musen Li,
Michael J. Ford,
Rika Kobayashi,
Roger D. Amos,
Jeffrey R. Reimers
Abstract:
Optimizing density-functional theory (DFT) and G0W0 calculations present coupled problems as orbitals from DFT are needed as G0W0 starting points. Applied to 341 two-dimensional (2D) materials, we demonstrate that CAM-B3LYP provides minimal changes in bandgap (e.g., mean absolute deviation of 0.23 eV) when used to start G0W0 calculations, compared to traditional functionals such as PBE, PBE0, and…
▽ More
Optimizing density-functional theory (DFT) and G0W0 calculations present coupled problems as orbitals from DFT are needed as G0W0 starting points. Applied to 341 two-dimensional (2D) materials, we demonstrate that CAM-B3LYP provides minimal changes in bandgap (e.g., mean absolute deviation of 0.23 eV) when used to start G0W0 calculations, compared to traditional functionals such as PBE, PBE0, and HSE06 (1.07 eV, 1.48 eV, and 1.51 eV, respectively). CAM-B3LYP also delivers the smallest changes in orbital representation. These and other results indicate the suitability of CAM-B3LYP as a density-functional approach for modelling 2D materials, as well as for use in optimizing G0W0 calculations. Our findings parallel well established features of applications to molecules, as well as for spectroscopic applications involving 3D materials.
△ Less
Submitted 8 July, 2023;
originally announced July 2023.
-
$^6$Li-loaded liquid scintillators produced by direct dissolution of compounds in diisopropylnaphthalene (DIPN)
Authors:
N. P. Zaitseva,
M. L. Carman,
M. J. Ford,
A. M. Glenn,
C. Roca,
S. Durham,
F. Sutanto,
S. A. Dazeley,
N. S. Bowden
Abstract:
The paper describes preparation of $^6$Li-loaded liquid scintillators by methods involving direct dissolution of $^6$Li salts in the commercial diisopropylnaphthalene (DIPN) solvent, without the formation of water-in-oil emulsions. Methods include incorporation of $^6$Li that, unlike previously reported formulations, does not require additions of water or a strong acid such as hydrochloric acid (H…
▽ More
The paper describes preparation of $^6$Li-loaded liquid scintillators by methods involving direct dissolution of $^6$Li salts in the commercial diisopropylnaphthalene (DIPN) solvent, without the formation of water-in-oil emulsions. Methods include incorporation of $^6$Li that, unlike previously reported formulations, does not require additions of water or a strong acid such as hydrochloric acid (HCl). Results of the conducted experiments show that dissolution of aromatic and aliphatic $^6$Li salts in DIPN can be easily achieved at 0.1- 0.3% by weight of atomic $^6$Li, using small additions of waterless surfactants, or mild carboxylic acids. An alternative way suggests incorporation of $^6$Li as a part of a surfactant molecule that can be dissolved in DIPN without any solubilizing additions. Proposed methods enable preparation of efficient $^6$Li-loaded liquid scintillators that, at a large scale of 50 cm, exhibit good pulse shape discrimination (PSD) properties combined with up to 107% of light output and up to 115% of the attenuation length measured relative to standard undoped EJ-309 liquid scintillator.
△ Less
Submitted 13 June, 2024; v1 submitted 28 March, 2023;
originally announced March 2023.
-
Synthesis and processing of lithium-loaded plastic scintillators on the kilogram scale
Authors:
Michael J. Ford,
Elisabeth Aigeldinger,
Felicia Sutanto,
Natalia P. Zaitseva,
Viacheslav A. Li,
M. Leslie Carman,
Andrew Glenn,
Cristian R. Catala,
Steven A. Dazeley,
Nathaniel Bowden
Abstract:
Plastic scintillators that can discriminate between gamma rays, fast neutrons, and thermal neutrons were synthesized and characterized while considering the balance between processing and performance at the kilogram scale. These trade-offs were necessitated by the inclusion of 0.1 wt. % lithium-6 to enable detection of thermal neutrons. The synthesis and processing of these plastic scintillators o…
▽ More
Plastic scintillators that can discriminate between gamma rays, fast neutrons, and thermal neutrons were synthesized and characterized while considering the balance between processing and performance at the kilogram scale. These trade-offs were necessitated by the inclusion of 0.1 wt. % lithium-6 to enable detection of thermal neutrons. The synthesis and processing of these plastic scintillators on the kilogram scale required consideration of many factors. First, a comonomer (methacrylic acid) was used to solubilize salts of lithium-6, which allow for a thermal-neutron capture reaction that produces scintillation light following energy transfer. Second, scintillation performance and processability were considered because the increasing content of the comonomer resulted in a sharp decrease in the light output. The use of small amounts of comonomer (less than or equal to 3 wt. %) resulted in better performance but required high processing temperatures. At large scales, these high temperatures could initiate an exothermic polymerization that results in premature curing and/or defects. The deleterious effects of the comonomer may be mitigated by using m-terphenyl as a primary dye rather than 2,5-diphenyloxazole (PPO), which has been traditionally used in organic scintillators. Finally, the curing environment was controlled to avoid defects like cracking and discoloration while maintaining solubility of dopants during curing. For scintillators that were produced from kilogram-scale batches of precursors, the effective attenuation of scintillation light was characterized.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
Pulse-shape discrimination in water-based scintillators
Authors:
Michael J. Ford,
Natalia P. Zaitseva,
M. Leslie Carman,
Steven A. Dazeley,
Adam Bernstein,
Andrew Glenn,
Oluwatomi A. Akindele
Abstract:
This work describes a class of liquid scintillators that contain mostly water (>50 wt. % of the entire composition) and can discriminate between interactions induced by neutrons and gamma rays. By balancing the interface interactions between the components of the formulation, these scintillators form emulsions that can be thermodynamically stable. This approach, which considers a quantity known as…
▽ More
This work describes a class of liquid scintillators that contain mostly water (>50 wt. % of the entire composition) and can discriminate between interactions induced by neutrons and gamma rays. By balancing the interface interactions between the components of the formulation, these scintillators form emulsions that can be thermodynamically stable. This approach, which considers a quantity known as the hydrophilic-lipophilic difference, requires consideration of the salinity and temperature as well as characterization of the surfactants and oil phase. Emulsions comprised of water and various oils were characterized first. Then, the effect of scintillating dyes in the oil phase was considered, followed by the construction of partial phase diagrams of the emulsions. For transparent oil-in-water emulsions with a single phase, the scintillation light yield and properties of pulse-shape discrimination were measured. The best performing scintillators contained 33 wt. % of a scintillating oil phase and exhibited a light yield that was as high as 18% of the light yield of a commercially available liquid scintillator that does not contain water (EJ-309). These water-based liquid scintillators exhibited a figure of merit of neutron/gamma ray discrimination as high as 1.79 at about 1500 keVee.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Accurate prediction of the properties of materials using the CAM-B3LYP Density Functional
Authors:
Musen Li,
Jeffrey R. Reimers,
Michael J. Ford,
Rika Kobayashi,
Roger D. Amos
Abstract:
Density functionals with asymptotic corrections to the long-range potential provide entry-level methods for calculations on molecules that can sustain charge transfer, but similar applications in Materials Science are rare. We describe an implementation of the CAM-B3LYP range-separated functional within the Vienna Ab-initio Simulation Package (VASP) framework, together with its analytical function…
▽ More
Density functionals with asymptotic corrections to the long-range potential provide entry-level methods for calculations on molecules that can sustain charge transfer, but similar applications in Materials Science are rare. We describe an implementation of the CAM-B3LYP range-separated functional within the Vienna Ab-initio Simulation Package (VASP) framework, together with its analytical functional derivatives. Results obtained for eight representative materials: aluminum, diamond, graphene, silicon, NaCl, MgO, 2D h-BN and 3D h-BN, indicate that CAM-B3LYP predictions embody mean-absolute deviations (MAD) compared to HSE06 that are reduced by a factor of 6 for lattice parameters, 4 for quasiparticle band gaps, 3 for the lowest optical excitation energies, and 6 for exciton binding energies. Further, CAM-B3LYP appears competitive compared to ab initio G0W0 and Bethe-Salpeter equation (BSE) approaches. The CAM-B3LYP implementation in VASP was verified by comparison of optimized geometries and reaction energies for isolated molecules taken from the ACCDB database, evaluated in large periodic unit cells, to analogous results obtained using Gaussian basis sets. Using standard GW pseudopotentials and energy cutoffs for the plane-wave calculations and the aug-cc-pV5Z basis set for the atomic-basis ones, the MAD in energy for 1738 chemical reactions was 0.34 kcal mol-1, whilst for 480 unique bond lengths this was 0.0036 Å; these values reduced to 0.28 kcal mol-1 (largest error 0.94 kcal mol-1) and 0.0009 Å by increasing the plane-wave cuttoff energy to 850 eV.
△ Less
Submitted 2 February, 2022; v1 submitted 14 February, 2021;
originally announced February 2021.
-
Photoluminescence and photochemistry of the $V_B^-$ defect in hexagonal boron nitride
Authors:
Jeffrey R. Reimers,
Jun Shen,
Mehran Kianinia,
Carlo Bradac,
Igor Aharonovich,
Michael J. Ford,
Piotr Piecuch
Abstract:
Extensive photochemical and spectroscopic properties of the $V_B^-$ defect in hexagonal boron nitride are calculated, concluding that the observed photoemission associated with recently observed optically-detected magnetic resonance is most likely of (1)3E" to (1)3A2' origin. Rapid intersystem crossing from the defect's triplet to singlet manifolds explains the observed short excited-state lifetim…
▽ More
Extensive photochemical and spectroscopic properties of the $V_B^-$ defect in hexagonal boron nitride are calculated, concluding that the observed photoemission associated with recently observed optically-detected magnetic resonance is most likely of (1)3E" to (1)3A2' origin. Rapid intersystem crossing from the defect's triplet to singlet manifolds explains the observed short excited-state lifetime and very low quantum yield. New experimental results reveal smaller intrinsic spectral bandwidths than previously recognized, interpreted in terms spectral narrowing and zero-phonon-line shifting induced by the Jahn-Teller effect. Different types of computational methods are applied to map out the complex triplet and singlet defect manifolds, including the doubly ionised formulation of the equation-of-motion coupled-cluster theory that is designed to deal with the open-shell nature of defect states, and mixed quantum-mechanics/molecular-mechanics schemes enabling 5763-atom simulations. Two other energetically feasible spectral assignments from amongst the singlet and triplet manifolds are considered, but ruled out based on inappropriate photochemical properties.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Density functionals with asymptotic-potential corrections are required for the simulation of spectroscopic properties of materials
Authors:
Musen Li,
Rika Kobayashi,
Roger D. Amos,
Michael J. Ford,
Jeffrey R. Reimers
Abstract:
Five effects of correction of the asymptotic potential error in density functionals are identified that significantly improve calculated properties of molecular excited states involving charge-transfer character. Newly developed materials-science computational methods are used to demonstrate how these effects manifest in materials spectroscopy. Connection is made considering chlorophyll-a as a par…
▽ More
Five effects of correction of the asymptotic potential error in density functionals are identified that significantly improve calculated properties of molecular excited states involving charge-transfer character. Newly developed materials-science computational methods are used to demonstrate how these effects manifest in materials spectroscopy. Connection is made considering chlorophyll-a as a paradigm for molecular spectroscopy, 22 iconic materials as paradigms for 3D materials spectroscopy, and the VN- defect in hexagonal boron nitride as an example of the spectroscopy of defects in 2D materials pertaining to nanophotonics. Defects can equally be thought of as being "molecular" and "materials" in nature and hence bridge the realms of molecular and materials spectroscopies. It is concluded that the density functional HSE06, currently considered as the standard for accurate calculations of materials spectroscopy, should be replaced, in most instances, by the computationally similar but asymptotically corrected CAM-B3LYP functional, with some specific functionals for materials use only providing further improvements.
△ Less
Submitted 2 February, 2022; v1 submitted 29 June, 2020;
originally announced June 2020.
-
Possible nanophotonics applications of the $V_N N_B$ defect in hexagonal boron nitride
Authors:
A. Sajid,
Jeffrey R. Reimers,
Rika Kobayashi,
Michael J. Ford
Abstract:
The $V_N N_B$ defect in hexagonal boron nitride (h-BN), comprising a nitrogen vacancy adjacent to a nitrogen-for-boron substitution, is modelled in regard to its possible usefulness in a nanophotonics device. The modelling is done on both a simple model compound and on a 2D periodic representation of the defect, considering its magnetic and spectroscopic properties. The electronic distribution in…
▽ More
The $V_N N_B$ defect in hexagonal boron nitride (h-BN), comprising a nitrogen vacancy adjacent to a nitrogen-for-boron substitution, is modelled in regard to its possible usefulness in a nanophotonics device. The modelling is done on both a simple model compound and on a 2D periodic representation of the defect, considering its magnetic and spectroscopic properties. The electronic distribution in $V_N N_B$ excited states is very open-shell in nature, and to deal with this two new computational methods are developed: one allows standard density-functional theory (DFT) calculations to be employed to evaluate state energies, the other introduces techniques needed to apply the VASP computational package to these and many other problems involving excited states. Also of general use, results from DFT calculations are then calibrated against those from ab initio methods, seeking robust computational schemes. These innovations allow 45 electronic states of the defect in its neutral, +1 and -1 charged forms to be considered. The charged forms of the defect are predicted to display properties of potential interest to nanophotonics.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Convergence of defect energetics calculations
Authors:
Jeffrey R. Reimers,
A. Sajid,
Rika Kobayashi,
Michael J. Ford
Abstract:
Determination of the chemical and spectroscopic natures of defects in materials such as hexagonal boron nitride (h-BN) remains a serious challenge for both experiment and theory. To establish basics needs for reliable calculations, we consider a model defect $V_N N_B$ in h-BN in which a boron-for-nitrogen substitution is accompanied by a nitrogen vacancy, examining its lowest-energy transition, (1…
▽ More
Determination of the chemical and spectroscopic natures of defects in materials such as hexagonal boron nitride (h-BN) remains a serious challenge for both experiment and theory. To establish basics needs for reliable calculations, we consider a model defect $V_N N_B$ in h-BN in which a boron-for-nitrogen substitution is accompanied by a nitrogen vacancy, examining its lowest-energy transition, (1)2B1 to (1)2A1. This provides a relatively simple test system as open-shell and charge-transfer effects, that are difficult to model and can dominate defect spectroscopy, are believed to be small. We establish calculation convergence with respect to sample size using both cluster and 2D-periodic models, convergence with respect to numerical issues such as use of plane-wave or Gaussian-basis-set expansions, and convergence with respect to the treatment of electron correlation. The results strongly suggest that poor performance of computational methods for defects of other natures arise through intrinsic methodological shortcomings.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Identifying Carbon as the Source of Visible Single Photon Emission from Hexagonal Boron Nitride
Authors:
Noah Mendelson,
Dipankar Chugh,
Jeffrey R. Reimers,
Tin S. Cheng,
Andreas Gottscholl,
Hu Long,
Christopher J. Mellor,
Alex Zettl,
Vladimir Dyakonov,
Peter H. Beton,
Sergei V. Novikov,
Chennupati Jagadish,
Hark Hoe Tan,
Michael J. Ford,
Milos Toth,
Carlo Bradac,
Igor Aharonovich
Abstract:
Single photon emitters (SPEs) in hexagonal boron nitride (hBN) have garnered significant attention over the last few years due to their superior optical properties. However, despite the vast range of experimental results and theoretical calculations, the defect structure responsible for the observed emission has remained elusive. Here, by controlling the incorporation of impurities into hBN and by…
▽ More
Single photon emitters (SPEs) in hexagonal boron nitride (hBN) have garnered significant attention over the last few years due to their superior optical properties. However, despite the vast range of experimental results and theoretical calculations, the defect structure responsible for the observed emission has remained elusive. Here, by controlling the incorporation of impurities into hBN and by comparing various synthesis methods, we provide direct evidence that the visible SPEs are carbon related. Room temperature optically detected magnetic resonance (ODMR) is demonstrated on ensembles of these defects. We also perform ion implantation experiments and confirm that only carbon implantation creates SPEs in the visible spectral range. Computational analysis of hundreds of potential carbon-based defect transitions suggest that the emission results from the negatively charged VBCN- defect, which experiences long-range out-of-plane deformations and is environmentally sensitive. Our results resolve a long-standing debate about the origin of single emitters at the visible range in hBN and will be key to deterministic engineering of these defects for quantum photonic devices.
△ Less
Submitted 20 April, 2020; v1 submitted 2 March, 2020;
originally announced March 2020.
-
Identification of defects responsible for optically detected magnetic resonance in hexagonal boron nitride
Authors:
A Sajid,
Kristian S Thygesen,
Jeffrey R Reimers,
Michael J Ford
Abstract:
Crystal defects in the two-dimensional insulator hexagonal boron nitride (hBN) can host localised electronic states that are candidates for applications in quantum technology, yet the precise chemical and structural nature of the defects measured in experiments remains unknown. Recently, optically detected magnetic resonance (ODMR) has been measured from defects in hBN for the first time, providin…
▽ More
Crystal defects in the two-dimensional insulator hexagonal boron nitride (hBN) can host localised electronic states that are candidates for applications in quantum technology, yet the precise chemical and structural nature of the defects measured in experiments remains unknown. Recently, optically detected magnetic resonance (ODMR) has been measured from defects in hBN for the first time, providing rich information. In one case a tentative assignment has been made to the VB- defect. Here, we report density-functional theory (DFT) calculations of the energetics, zero field splitting parameter, D, and hyperfine coupling tensor, A, that confirm this assignment. We also show that a second ODMR measurement is consistent with the VN- defect. In both cases, the location of the defect at the edge or centre of layers is important. This advances our atomic-scale understanding of crystal defects in hBN, which is necessary for harnessing the potential of these systems for quantum technology applications.
△ Less
Submitted 16 December, 2019;
originally announced December 2019.
-
Impressive computational acceleration by using machine learning for 2-dimensional super-lubricant materials discovery
Authors:
Marco Fronzi,
Mutaz Abu Ghazaleh,
Olexandr Isayev,
David A. Winkler,
Joe Shapter,
Michael J. Ford
Abstract:
The screening of novel materials is an important topic in the field of materials science. Although traditional computational modeling, especially first-principles approaches, is a very useful and accurate tool to predict the properties of novel materials, it still demands extensive and expensive state-of-the-art computational resources. Additionally, they can be often extremely time consuming. We…
▽ More
The screening of novel materials is an important topic in the field of materials science. Although traditional computational modeling, especially first-principles approaches, is a very useful and accurate tool to predict the properties of novel materials, it still demands extensive and expensive state-of-the-art computational resources. Additionally, they can be often extremely time consuming. We describe a time and resource-efficient machine learning approach to create a large dataset of structural properties of van der Waals layered structures. In particular, we focus on the interlayer energy and the elastic constant of layered materials composed of two different 2-dimensional (2D) structures, that are important for novel solid lubricant and super-lubricant materials. We show that machine learning models can recapitulate results of computationally expansive approaches (i.e. density functional theory) with high accuracy.
△ Less
Submitted 29 July, 2020; v1 submitted 20 November, 2019;
originally announced November 2019.
-
Single photon emitters in hexagonal boron nitride: A review of progress
Authors:
A. Sajid,
Michael J. Ford,
Jeffrey R. Reimers
Abstract:
This report summarizes progress made in understanding properties such as zero-phonon-line energies, emission and absorption polarizations, electron-phonon couplings, strain tuning and hyperfine coupling of single photon emitters in hexagonal boron nitride. The primary aims of this research are to discover the chemical nature of the emitting centres and to facilitate deployment in device applicatio…
▽ More
This report summarizes progress made in understanding properties such as zero-phonon-line energies, emission and absorption polarizations, electron-phonon couplings, strain tuning and hyperfine coupling of single photon emitters in hexagonal boron nitride. The primary aims of this research are to discover the chemical nature of the emitting centres and to facilitate deployment in device applications. Critical analyses of the experimental literature and data interpretation, as well as theoretical approaches used to predict properties, are made. In particular, computational and theoretical limitations and challenges are discussed, with a range of suggestions made to overcome these limitations, striving to achieve realistic predictions concerning the nature of emitting centers. A symbiotic relationship is required in which calculations focus on properties that can easily be measured, whilst experiments deliver results in a form facilitating mass-produced calculations.
△ Less
Submitted 1 November, 2019;
originally announced November 2019.
-
The invasion speed of cell migration models with realistic cell cycle time distributions
Authors:
Enrico Gavagnin,
Matthew J. Ford,
Richard L. Mort,
Tim Rogers,
Christian A. Yates
Abstract:
Cell proliferation is typically incorporated into stochastic mathematical models of cell migration by assuming that cell divisions occur after an exponentially distributed waiting time. Experimental observations, however, show that this assumption is often far from the real cell cycle time distribution (CCTD). Recent studies have suggested an alternative approach to modelling cell proliferation ba…
▽ More
Cell proliferation is typically incorporated into stochastic mathematical models of cell migration by assuming that cell divisions occur after an exponentially distributed waiting time. Experimental observations, however, show that this assumption is often far from the real cell cycle time distribution (CCTD). Recent studies have suggested an alternative approach to modelling cell proliferation based on a multi-stage representation of the CCTD. In order to validate and parametrise these models, it is important to connect them to experimentally measurable quantities. In this paper we investigate the connection between the CCTD and the speed of the collective invasion. We first state a result for a general CCTD, which allows the computation of the invasion speed using the Laplace transform of the CCTD. We use this to deduce the range of speeds for the general case. We then focus on the more realistic case of multi-stage models, using both a stochastic agent-based model and a set of reaction-diffusion equations for the cells' average density. By studying the corresponding travelling wave solutions, we obtain an analytical expression for the speed of invasion for a general N-stage model with identical transition rates, in which case the resulting cell cycle times are Erlang distributed. We show that, for a general N-stage model, the Erlang distribution and the exponential distribution lead to the minimum and maximum invasion speed, respectively. This result allows us to determine the range of possible invasion speeds in terms of the average proliferation time for any multi-stage model.
△ Less
Submitted 8 June, 2018;
originally announced June 2018.
-
Van der Waals forces control ferroelectric-antiferroelectric ordering in ABP2X6 laminar materials
Authors:
Jeffrey R. Reimers,
Sherif Abdulkader Tawfik,
Michael J. Ford
Abstract:
We show how van der Waals (vdW) forces outcompete covalent and ionic forces to control ferroelectric ordering in CuInP2S6 nanoflakes as well as in CuInP2S6 and CuBiP2Se6 crystals. While the self-assembly of these 2D layered materials is clearly controlled by vdW effects, this result indicates that the internal layer structure is also similarly controlled. Using up to 14 first-principles computatio…
▽ More
We show how van der Waals (vdW) forces outcompete covalent and ionic forces to control ferroelectric ordering in CuInP2S6 nanoflakes as well as in CuInP2S6 and CuBiP2Se6 crystals. While the self-assembly of these 2D layered materials is clearly controlled by vdW effects, this result indicates that the internal layer structure is also similarly controlled. Using up to 14 first-principles computational methods, we predict that the bilayers of both materials should be antiferroelectric. However, antiferroelectric nanoflakes and bulk materials are shown to embody two fundamentally different types of inter-layer interactions, with vdW forces strongly favouring one and strongly disfavouring the other compared to ferroelectric ordering. Strong specific vdW interactions involving the Cu atoms control this effect. Thickness-dependent significant cancellation of these two large opposing vdW contributions results in a small net effect that interacts with weak ionic contributions to control ferroelectric ordering.
△ Less
Submitted 29 May, 2018;
originally announced May 2018.
-
van der Waals forces control the internal chemical structure of monolayers within ABP2X6 lamellar materials
Authors:
Sherif Abdulkader Tawfik,
Jeffrey R. Reimers,
Catherine Stampfl,
Michael J. Ford
Abstract:
Following the recent demonstration that van der Waals forces control the ferroelectric ordering of layers within nanoflakes and bulk samples of CuBiP2Se6 and CuInP2S6, it is demonstrated that they also control the internal geometrical structure of isolated monolayers of these materials. This internal structure involves large displacements of the copper atoms, either normal to the layer plane or el…
▽ More
Following the recent demonstration that van der Waals forces control the ferroelectric ordering of layers within nanoflakes and bulk samples of CuBiP2Se6 and CuInP2S6, it is demonstrated that they also control the internal geometrical structure of isolated monolayers of these materials. This internal structure involves large displacements of the copper atoms, either normal to the layer plane or else within the plane, that change its ligation environment. In both cases, the van der Waals dispersion force out-competes traditional bonding effects to control structure. However, we find that the aspects of the dispersion force giving rise to each effect are uncorrelated: long range effects control inter-layer ferroelectric ordering whereas short-range effects control internal layer structure. These conclusions are drawn considering predicted properties of monolayers, bilayers, and bulk materials obtained using 14 density-functional-theory based methods. While the different methods used often predict starkly different quantitative results, they concur as to the basic nature of ABP2X6 materials. Of the methods used, only the PBE-D3 and optPBEvdW methods were found to predict a wide range of observed properties without serious disparity. Finding optimal computational methods remains a significant challenge for which the unusual multi-scale nature of the van der Waals interactions in ABP2X6 materials provides demanding criteria.
△ Less
Submitted 29 May, 2018;
originally announced May 2018.
-
Superconductivity in intercalated buckled two-dimensional materials: KGe$_2$
Authors:
Sherif Abdulkader Tawfik,
Catherine Stampfl,
Michael J. Ford
Abstract:
Germanene has emerged as a novel two-dimensional material with various interesting properties and applications. Here we report the possibility of superconductivity in a stable potassium intercalated germanene compound, KGe$_2$, with a transition temperature $T_c \sim 11$ K, and an electron-phonon coupling of 1.9. Applying a 5\% tensile strain, which reduces the buckling height by 4.5\%, leads to t…
▽ More
Germanene has emerged as a novel two-dimensional material with various interesting properties and applications. Here we report the possibility of superconductivity in a stable potassium intercalated germanene compound, KGe$_2$, with a transition temperature $T_c \sim 11$ K, and an electron-phonon coupling of 1.9. Applying a 5\% tensile strain, which reduces the buckling height by 4.5\%, leads to the reduction of the electron-phonon coupling by 11\% and a slight increase in $T_c \sim 12$ K. That is, strong electron-phonon coupling results from the buckled structure of the germanene layers. Despite being an intercalated van der Waals material similar to intercalated graphite superconductors, it does not possess an occupied interlayer state.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
Understanding and calibrating Density-Functional-Theory calculations describing the energy and spectroscopy of defect sites in hexagonal boron nitride
Authors:
Jeffrey R. Reimers,
Ali Sajid,
Rika Kobayashi,
Michael J. Ford
Abstract:
Defect states in 2D materials present many possible uses but both experimental and computational characterization of their spectroscopic properties is difficult. We provide and compare results from 13 DFT and ab initio computational methods for up to 25 excited states of a paradigm system, the VNCB defect in hexagonal boron nitride (h-BN). Studied include include: (i) potentially catastrophic effe…
▽ More
Defect states in 2D materials present many possible uses but both experimental and computational characterization of their spectroscopic properties is difficult. We provide and compare results from 13 DFT and ab initio computational methods for up to 25 excited states of a paradigm system, the VNCB defect in hexagonal boron nitride (h-BN). Studied include include: (i) potentially catastrophic effects for computational methods arising from the multi-reference nature of the closed-shell and open-shell states of the defect, which intrinsically involves broken chemical bonds, (ii) differing results from DFT and time-dependent DFT (TDDFT) calculations, (iii) comparison of cluster models to periodic-slab models of the defect, (iv) the starkly differing effects of nuclear relaxation on the various electronic states as broken bonds try to heal that control the widths of photoabsorption and photoemission spectra, (v) the effect of zero-point energy and entropy on free-energy differences, (vi) defect-localized and conduction/valence band transition natures, and (vii) strategies needed to ensure that the lowest-energy state of a defect can be computationally identified.
△ Less
Submitted 9 February, 2018;
originally announced February 2018.
-
Defect states in hexagonal boron nitride: Assignments of observed properties and prediction of properties relevant to quantum computation
Authors:
A. Sajid,
Jeffrey R. Reimers,
Michael J. Ford
Abstract:
Key properties of nine possible defect sites in hexagonal boron nitride (h-BN) are predicted using density-functional theory and are corrected by applying results from high-level ab initio calculations. Observed h-BN electron-paramagnetic resonance signals at 22.4, 20.83, and 352.70 MHz are assigned to VN, CN, and VNO2B, respectively, while the observed photoemission at 1.95 eV is assigned to VNCB…
▽ More
Key properties of nine possible defect sites in hexagonal boron nitride (h-BN) are predicted using density-functional theory and are corrected by applying results from high-level ab initio calculations. Observed h-BN electron-paramagnetic resonance signals at 22.4, 20.83, and 352.70 MHz are assigned to VN, CN, and VNO2B, respectively, while the observed photoemission at 1.95 eV is assigned to VNCB. Detailed consideration of the available excited states, allowed spin-orbit couplings, zero-field splitting, and optical transitions are made for the two related defects VNCB and VBCN. VNCB is proposed for realizing long-lived quantum memory in h-BN. VBCN is predicted to have a triplet ground state, implying that spin initialization by optical means is feasible and suitable optical excitations are identified, making this defect of interest for possible quantum-qubit operations.
△ Less
Submitted 9 February, 2018;
originally announced February 2018.
-
Evaluation of van der Waals density functionals for layered materials
Authors:
Sherif Abdulkader Tawfik,
Tim Gould,
Catherine Stamp,
Michael J. Ford
Abstract:
In 2012, Bjorkman et al. posed the question "Are we van der Waals ready?" [J. Phys.: Condens. Matter, 2012, 24, 424218] about the ability of ab initio modelling to reproduce van der Waals (vdW) dispersion forces in layered materials. The answer at that time was no, however. Here we report on a new generation of vdW dispersion models and show that one, fractionally-ionic atom (FIA) theory, offers c…
▽ More
In 2012, Bjorkman et al. posed the question "Are we van der Waals ready?" [J. Phys.: Condens. Matter, 2012, 24, 424218] about the ability of ab initio modelling to reproduce van der Waals (vdW) dispersion forces in layered materials. The answer at that time was no, however. Here we report on a new generation of vdW dispersion models and show that one, fractionally-ionic atom (FIA) theory, offers close to quantitative predictions for layered structures. Furthermore, it does so from a qualitatively correct picture of dispersion forces. Other methods, such as D3 and optB88vdW also work well, albeit with some exceptions. We thus argue that we are nearly vdW ready, and that some modern dispersion methods are accurate enough to be used for nanomaterial prediction, albeit with some caution required.
△ Less
Submitted 28 March, 2018; v1 submitted 22 December, 2017;
originally announced December 2017.
-
A multi-stage representation of cell proliferation as a Markov process
Authors:
Christian A Yates,
Matthew J Ford,
Richard L Mort
Abstract:
The stochastic simulation algorithm commonly known as Gillespie's algorithm is now used ubiquitously in the modelling of biological processes in which stochastic effects play an important role. In well-mixed scenarios at the sub-cellular level it is often reasonable to assume that times between successive reaction/interaction events are exponentially distributed and can be appropriately modelled a…
▽ More
The stochastic simulation algorithm commonly known as Gillespie's algorithm is now used ubiquitously in the modelling of biological processes in which stochastic effects play an important role. In well-mixed scenarios at the sub-cellular level it is often reasonable to assume that times between successive reaction/interaction events are exponentially distributed and can be appropriately modelled as a Markov process and hence simulated by the Gillespie algorithm. However, Gillespie's algorithm is routinely applied to model biological systems for which it was never intended. In particular, processes in which cell proliferation is important should not be simulated naively using the Gillespie algorithm since the history-dependent nature of the cell cycle breaks the Markov process. The variance in experimentally measured cell cycle times is far less than in an exponential cell cycle time distribution with the same mean.
Here we suggest a method of modelling the cell cycle that restores the memoryless property to the system and is therefore consistent with simulation via the Gillespie algorithm. By breaking the cell cycle into a number of independent exponentially distributed stages we can restore the Markov property at the same time as more accurately approximating the appropriate cell cycle time distributions. The consequences of our revised mathematical model are explored analytically. We demonstrate the importance of employing the correct cell cycle time distribution by considering two models incorporating cellular proliferation (one spatial and one non-spatial) and demonstrating that changing the cell cycle time distribution makes quantitative and qualitative differences to their outcomes. Our adaptation will allow modellers and experimentalists alike to appropriately represent cellular proliferation, whilst still being able to take advantage of the Gillespie algorithm.
△ Less
Submitted 22 July, 2019; v1 submitted 26 May, 2017;
originally announced May 2017.
-
First principles investigation of quantum emission from hBN defects
Authors:
Sherif Abdulkader Tawfik,
Sajid Ali,
Marco Fronzi,
Mehran Kianinia,
Toan Trong Tran,
Catherine Stampfl,
Igor Aharonovich,
Milos Toth,
Michael J. Ford
Abstract:
Hexagonal boron nitride (hBN) has recently emerged as a fascinating platform for room-temperature quantum photonics due to the discovery of robust visible light single-photon emitters. In order to utilize these emitters, it is necessary to have a clear understanding of their atomic structure and the associated excitation processes that give rise to this single photon emission. Here we perform dens…
▽ More
Hexagonal boron nitride (hBN) has recently emerged as a fascinating platform for room-temperature quantum photonics due to the discovery of robust visible light single-photon emitters. In order to utilize these emitters, it is necessary to have a clear understanding of their atomic structure and the associated excitation processes that give rise to this single photon emission. Here we perform density-functional theory (DFT) and constrained DFT calculations for a range of hBN point defects in order to identify potential emission candidates. By applying a number of criteria on the electronic structure of the ground state and the atomic structure of the excited states of the considered defects, and then calculating the Huang-Rhys (HR) factor, we find that the CBVN defect, in which a carbon atom substitutes a boron atom and the opposite nitrogen atom is removed, is a potential emission source with a HR factor of 1.66, in good agreement with the experimental HR factor. We calculate the photoluminescence (PL) line shape for this defect and find that it reproduces a number of key features in the the experimental PL lineshape.
△ Less
Submitted 13 June, 2017; v1 submitted 16 May, 2017;
originally announced May 2017.
-
Tunable and high purity room-temperature single photon emission from atomic defects in hexagonal boron nitride
Authors:
Gabriele Grosso,
Hyowon Moon,
Benjamin Lienhard,
Sajid Ali,
Dmitri K. Efetov,
Marco M. Furchi,
Pablo Jarillo-Herrero,
Michael J. Ford,
Igor Aharonovich,
Dirk Englund
Abstract:
Two-dimensional van der Waals materials have emerged as promising platforms for solid-state quantum information processing devices with unusual potential for heterogeneous assembly. Recently, bright and photostable single photon emitters were reported from atomic defects in layered hexagonal boron nitride (hBN), but controlling inhomogeneous spectral distribution and reducing multi-photon emission…
▽ More
Two-dimensional van der Waals materials have emerged as promising platforms for solid-state quantum information processing devices with unusual potential for heterogeneous assembly. Recently, bright and photostable single photon emitters were reported from atomic defects in layered hexagonal boron nitride (hBN), but controlling inhomogeneous spectral distribution and reducing multi-photon emission presented open challenges. Here, we demonstrate that strain control allows spectral tunability of hBN single photon emitters over 6 meV, and material processing sharply improves the single-photon purity. We report high single photon count rates exceeding 10^7 counts/sec at saturation, which is the highest single photon detection rate for room-temperature single photon emitters, to our knowledge. Furthermore, these emitters are stable to material transfer to other substrates. High-purity and photostable single photon emission at room temperature, together with spectral tunability and transferability, opens the door to scalable integration of high-quality quantum emitters in photonic quantum technologies.
△ Less
Submitted 10 November, 2016;
originally announced November 2016.
-
Robust Solid State Quantum System Operating at 800 K
Authors:
Mehran Kianinia,
Sherif Abdulkader Tawfik,
Blake Regan,
Toan Trong Tran,
Michael J. Ford,
Igor Aharonovich,
Milos Toth
Abstract:
Realization of Quantum information and communications technologies requires robust, stable solid state single photon sources. However, most existing sources cease to function above cryogenic or room temperature due to thermal ionization or strong phonon coupling which impede their emissive and quantum properties. Here we present an efficient single photon source based on a defect in a van der Waal…
▽ More
Realization of Quantum information and communications technologies requires robust, stable solid state single photon sources. However, most existing sources cease to function above cryogenic or room temperature due to thermal ionization or strong phonon coupling which impede their emissive and quantum properties. Here we present an efficient single photon source based on a defect in a van der Waals crystal that is optically stable and operates at elevated temperatures of up to 800 K. The quantum nature of the source and the photon purity are maintained upon heating to 800 K and cooling back to room temperature. Our report of a robust high temperature solid state single photon source constitutes a significant step to-wards practical, integrated quantum technologies for real-world environments.
△ Less
Submitted 9 November, 2016;
originally announced November 2016.
-
Robust multicolor single photon emission from point defects in hexagonal boron nitride
Authors:
Toan Trong Tran,
Christopher ElBadawi,
Daniel Totonjian,
Charlene J Lobo,
Gabriele Grosso,
Hyowon Moon,
Dirk R. Englund,
Michael J. Ford,
Igor Aharonovich,
Milos Toth
Abstract:
Hexagonal boron nitride (hBN) is an emerging two dimensional material for quantum photonics owing to its large bandgap and hyperbolic properties. Here we report a broad range of multicolor room temperature single photon emissions across the visible and the near infrared spectral ranges from point defects in hBN multilayers. We show that the emitters can be categorized into two general groups, but…
▽ More
Hexagonal boron nitride (hBN) is an emerging two dimensional material for quantum photonics owing to its large bandgap and hyperbolic properties. Here we report a broad range of multicolor room temperature single photon emissions across the visible and the near infrared spectral ranges from point defects in hBN multilayers. We show that the emitters can be categorized into two general groups, but most likely possess similar crystallographic structure. We further show two approaches for engineering of the emitters using either electron beam irradiation or annealing, and characterize their photophysical properties. The emitters exhibit narrow line widths of sub 10 nm at room temperature, and a short excited state lifetime with high brightness. Remarkably, the emitters are extremely robust and withstand aggressive annealing treatments in oxidizing and reducing environments. Our results constitute the first step towards deterministic engineering of single emitters in 2D materials and hold great promise for the use of defects in boron nitride as sources for quantum information processing and nanophotonics.
△ Less
Submitted 31 March, 2016;
originally announced March 2016.
-
Quantum Emission From Hexagonal Boron Nitride Monolayers
Authors:
Toan Trong Tran,
Kerem Bray,
Michael J. Ford,
Milos Toth,
Igor Aharonovich
Abstract:
Atomically thin van der Waals crystals have recently enabled new scientific and technological breakthroughs across a variety of disciplines in materials science, nanophotonics and physics. However, non-classical photon emission from these materials has not been achieved to date. Here we report room temperature quantum emission from hexagonal boron nitride nanoflakes. The single photon emitter exhi…
▽ More
Atomically thin van der Waals crystals have recently enabled new scientific and technological breakthroughs across a variety of disciplines in materials science, nanophotonics and physics. However, non-classical photon emission from these materials has not been achieved to date. Here we report room temperature quantum emission from hexagonal boron nitride nanoflakes. The single photon emitter exhibits a combination of superb quantum optical properties at room temperature that include the highest brightness reported in the visible part of the spectrum, narrow line width, absolute photo-stability, a short excited state lifetime and a high quantum efficiency. Density functional theory modeling suggests that the emitter is the antisite nitrogen vacancy defect that is present in single and multi-layer hexagonal boron nitride. Our results constitute the unprecedented potential of van der Waals crystals for nanophotonics, optoelectronics and quantum information processing.
△ Less
Submitted 24 April, 2015;
originally announced April 2015.
-
A review of the optical properties of alloys and intermetallics for plasmonics
Authors:
Martin G Blaber,
Matthew D Arnold,
Michael J Ford
Abstract:
Alternative materials are required to enhance the efficacy of plasmonic devices. We discuss the optical properties of a number of alloys, doped metals, intermetallics, silicides, metallic glasses and high pressure materials. We conclude that due to the probability of low frequency interband transitions, materials with partially occupied d-states perform poorly as plasmonic materials, ruling out…
▽ More
Alternative materials are required to enhance the efficacy of plasmonic devices. We discuss the optical properties of a number of alloys, doped metals, intermetallics, silicides, metallic glasses and high pressure materials. We conclude that due to the probability of low frequency interband transitions, materials with partially occupied d-states perform poorly as plasmonic materials, ruling out many alloys, intermetallics and silicides as viable. The increased probability of electron-electron and electron-phonon scattering rules out many doped and glassy metals.
△ Less
Submitted 27 January, 2010;
originally announced January 2010.
-
Designing materials for plasmonic systems
Authors:
Martin G. Blaber,
Matthew D. Arnold,
Michael J. Ford
Abstract:
We use electronic structure calculations based upon density functional theory to search for ideal plasmonic materials among the alkali noble intermetallics. Importantly, we use density functional perturbation theory to calculate the electron-phonon interaction and from there use a first order solution to the Boltzmann equation to estimate the phenomenological dam** frequency in the Drude diele…
▽ More
We use electronic structure calculations based upon density functional theory to search for ideal plasmonic materials among the alkali noble intermetallics. Importantly, we use density functional perturbation theory to calculate the electron-phonon interaction and from there use a first order solution to the Boltzmann equation to estimate the phenomenological dam** frequency in the Drude dielectric function. We discuss the necessary electronic features of a plasmonic material and investigate the optical properties of the alkali-noble intermetallics in terms of some generic plasmonic system quality factors. We conclude that at low negative permittivities, KAu with a dam** frequency of 0.0224 eV and a high optical gap to bare plasma frequency ratio, outperforms gold and to some extent silver as a plasmonic material. Unfortunately, a low plasma frequency (1.54 eV) reduces its utility in modern plasmonics applications. We also discuss, briefly, the effect of local fields on the optical properties of these materials.
△ Less
Submitted 25 August, 2009;
originally announced August 2009.
-
Ab initio Molecular Dynamical Investigation of the Finite Temperature Behavior of the Tetrahedral Au$_{19}$ and Au$_{20}$ Clusters
Authors:
Sailaja Krishnamurty,
Ghazal Shafai,
D. G. Kanhere,
B. Soulé de Bas,
M. J. Ford
Abstract:
Density functional molecular dynamics simulations have been carried out to understand the finite temperature behavior of Au$_{19}$ and Au$_{20}$ clusters. Au$_{20}$ has been reported to be a unique molecule having tetrahedral geometry, a large HOMO-LUMO energy gap and an atomic packing similar to that of the bulk gold (J. Li et al., Science, {\bf 299} 864, 2003). Our results show that the geomet…
▽ More
Density functional molecular dynamics simulations have been carried out to understand the finite temperature behavior of Au$_{19}$ and Au$_{20}$ clusters. Au$_{20}$ has been reported to be a unique molecule having tetrahedral geometry, a large HOMO-LUMO energy gap and an atomic packing similar to that of the bulk gold (J. Li et al., Science, {\bf 299} 864, 2003). Our results show that the geometry of Au$_{19}$ is exactly identical to that of Au$_{20}$ with one missing corner atom (called as vacancy). Surprisingly, our calculated heat capacities for this nearly identical pair of gold cluster exhibit dramatic differences. Au$_{20}$ undergoes a clear and distinct solid like to liquid like transition with a sharp peak in the heat capacity curve around 770 K. On the other hand, Au$_{19}$ has a broad and flat heat capacity curve with continuous melting transition. This continuous melting transition turns out to be a consequence of a process involving series of atomic rearrangements along the surface to fill in the missing corner atom. This results in a restricted diffusive motion of atoms along the surface of Au$_{19}$ between 650 K to 900 K during which the shape of the ground state geometry is retained. In contrast, the tetrahedral structure of Au$_{20}$ is destroyed around 800 K, and the cluster is clearly in a liquid like state above 1000 K. Thus, this work clearly demonstrates that (i) the gold clusters exhibit size sensitive variations in the heat capacity curves and (ii) the broad and continuous melting transition in a cluster, a feature which has so far been attributed to the disorder or absence of symmetry in the system, can also be a consequence of a defect (absence of a cap atom) in the structure.
△ Less
Submitted 12 December, 2006;
originally announced December 2006.