-
Guidelines for Material Design in Semitransparent Organic Solar Cells
Authors:
Karen Forberich,
Alessandro Troisi,
Chao Liu,
Michael Wagner,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Organic solar cells (OSCs) are uniquely suited for semitransparent applications due to their adjustable absorption spectrum. However, most high-performance semitransparent cells reported to date are based on materials that have shown high power conversion efficiency for opaque devices. We therefore present a model to assess the optimum efficiency and transparency for a specific donor and acceptor…
▽ More
Organic solar cells (OSCs) are uniquely suited for semitransparent applications due to their adjustable absorption spectrum. However, most high-performance semitransparent cells reported to date are based on materials that have shown high power conversion efficiency for opaque devices. We therefore present a model to assess the optimum efficiency and transparency for a specific donor and acceptor band gap. The absorption characteristics of both donor and acceptor are modeled with spectral data of typical absorber materials from the literature which are adjusted to achieve the desired band gap value. The results show three distinct regions of high light utilization efficiency if the photopic curve is employed as a weighting function (corresponding to window applications), and a broad maximum for the plant action spectrum as a weighting function (corresponding to greenhouse applications). When comparing these findings to reported experimental values, it is evident that the band gaps of the materials used for the experimental studies do not correspond to the maxima identified by our simulation model. The analysis of the energy levels of molecules recorded in the literature confirms that all band gaps and therefore all LUE maxima are chemically feasible so that the performance of semitransparent OSCs can be further improved by designing materials with optimized absorption spectra.
△ Less
Submitted 11 November, 2023;
originally announced November 2023.
-
Matching the photocurrent of perovskite/organic tandem solar modules by varying the cell width
Authors:
Jose Garcia Cerrillo,
Andreas Distler,
Fabio Matteocci,
Karen Forberich,
Michael Wagner,
Robin Basu,
Luigi Angelo Castriotta,
Farshad Jafarzadeh,
Francesca Brunetti,
Fu Yang,
Ning Li,
Asiel Neftali Corpus Mendoza,
Aldo Di Carlo,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks. However, for thin film photovoltaic technologies at the module level, another design variable significantly alleviates the task of photocurrent matching, namely the c…
▽ More
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks. However, for thin film photovoltaic technologies at the module level, another design variable significantly alleviates the task of photocurrent matching, namely the cell width, whose modification can be readily realized by the adjustment of the module layout. Herein we demonstrate this concept at the experimental level for the first time for a 2T-mechanically stacked perovskite (FAPbBr3)/organic (PM6:Y6:PCBM) tandem mini-module, an unprecedented approach for these emergent photovoltaic technologies fabricated in an independent manner. An excellent Isc matching is achieved by tuning the cell widths of the perovskite and organic modules to 7.22 mm (PCEPVKT-mod= 6.69%) and 3.19 mm (PCEOPV-mod= 12.46%), respectively, leading to a champion efficiency of 14.94% for the tandem module interconnected in series with an aperture area of 20.25 cm2. Rather than demonstrating high efficiencies at the level of small lab cells, our successful experimental proof-of-concept at the module level proves to be particularly useful to couple devices with non-complementary semiconductors, either in series or in parallel electrical connection, hence overcoming the limitations imposed by the monolithic structure.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Bypassing the single junction limit with advanced photovoltaic architectures
Authors:
Larry Lüer,
Marius Peters,
Dan Bornstein,
Vincent M. Le Corre,
Karen Forberich,
Dirk Guldi,
Christoph J. Brabec
Abstract:
In single-junction photovoltaic (PV) devices, the maximum achievable power conversion efficiency (PCE) is mainly limited by thermalization and transmission losses, because polychromatic solar irradiation cannot be matched to a single bandgap. Several concepts are being investigated to reduce these losses, such as the classical vertical multijunction cells, 'lateral' tandem cells, and multi-exciton…
▽ More
In single-junction photovoltaic (PV) devices, the maximum achievable power conversion efficiency (PCE) is mainly limited by thermalization and transmission losses, because polychromatic solar irradiation cannot be matched to a single bandgap. Several concepts are being investigated to reduce these losses, such as the classical vertical multijunction cells, 'lateral' tandem cells, and multi-exciton generation in the form of photon up- and down-conversion. While in theory, efficiencies exceeding 90% are possible (Landsberg or thermodynamic limit), there are severe practical limitations in terms of processability, cost, and spectral sensitivity. Here, we present a simulation environment based on Bayesian Optimization that is able to predict and optimize the electrical performance of multi-junction architectures, both vertical and lateral, in combination with multi-exciton materials. With respect to vertical stacks, we show that by optimizing bandgap energies of multi-exciton generation (MEG) layers, double junctions can reach efficiencies beyond those of five-junction tandem devices (57%). Moreover, such combinations of MEG and double junction devices would be highly resilient against spectral changes of the incoming sunlight. We point out three main challenges for PV material science to realize such devices. With respect to lateral architectures, we show that MEG layers might allow reducing nonradiative voltage losses following the Energy Gap Law. Finally, we show that the simulation environment is able to use machine learned quantitative structure-property relationships obtained from high-throughput experiments to virtually optimise the active layer (such as, the film thickness and the donor-acceptor ratio) for a given architecture. The simulation environment thus represents an important building block towards a digital twin of PV materials.
△ Less
Submitted 19 May, 2023;
originally announced May 2023.
-
Cutting 'lab-to fab' short: High Throughput Optimization and Process Assessment in Roll-to-Roll Slot Die Coating of Printed Photovoltaics
Authors:
Michael Wagner,
Andreas Distler,
Vincent M. Le Corre,
Simon Zapf,
Burak Baydar,
Hans-Dieter Schmidt,
Madeleine Heyder,
Karen Forberich,
Larry Lüer,
Christoph J. Brabec,
H. -J. Egelhaaf
Abstract:
Commercialization of printed photovoltaics requires knowledge of the optimal composition and microstructure of the single layers, and the ability to control these properties over large areas under industrial conditions. While microstructure optimization can be readily achieved by lab scale methods, the transfer from laboratory scale to a pilot production line ('lab to fab') is a slow and cumbersom…
▽ More
Commercialization of printed photovoltaics requires knowledge of the optimal composition and microstructure of the single layers, and the ability to control these properties over large areas under industrial conditions. While microstructure optimization can be readily achieved by lab scale methods, the transfer from laboratory scale to a pilot production line ('lab to fab') is a slow and cumbersome process. Here, we show how we can optimize the performance of organic solar cells and at the same time assess process performance in a 2D combinatorial approach directly on an industrially relevant slot die coating line. This is enabled by a multi-nozzle slot die coating head allowing parameter variations along and across the web. This modification allows us to generate and analyze 3750 devices in a single coating run, varying the active layer donor:acceptor ratio and the thickness of the electron transport layer (ETL). We use Gaussian Process Regression (GPR) to exploit the whole dataset for precise determination of the optimal parameter combination. Performance-relevant features of the active layer morphology are inferred from UV-Vis absorption spectra. By map** morphology in this way, small undesired gradients of process conditions (extrusion rates, annealing temperatures) are detected and their effect on device performance is quantified. The correlation between process parameters, morphology and performance obtained by GPR provides hints to the underlying physics, which are finally quantified by automated high-throughput drift-diffusion simulations. This leads to the conclusion that voltage losses which are observed for very thin ETL coatings are due to incomplete coverage of the electrode by the ETL, which cause enhanced surface recombination.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
