-
Accurate Patient Alignment without Unnecessary Imaging Dose via Synthesizing Patient-specific 3D CT Images from 2D kV Images
Authors:
Yuzhen Ding,
Jason M. Holmes,
Hongying Feng,
Baoxin Li,
Lisa A. McGee,
Jean-Claude M. Rwigema,
Sujay A. Vora,
Daniel J. Ma,
Robert L. Foote,
Samir H. Patel,
Wei Liu
Abstract:
In radiotherapy, 2D orthogonally projected kV images are used for patient alignment when 3D-on-board imaging(OBI) unavailable. But tumor visibility is constrained due to the projection of patient's anatomy onto a 2D plane, potentially leading to substantial setup errors. In treatment room with 3D-OBI such as cone beam CT(CBCT), the field of view(FOV) of CBCT is limited with unnecessarily high imag…
▽ More
In radiotherapy, 2D orthogonally projected kV images are used for patient alignment when 3D-on-board imaging(OBI) unavailable. But tumor visibility is constrained due to the projection of patient's anatomy onto a 2D plane, potentially leading to substantial setup errors. In treatment room with 3D-OBI such as cone beam CT(CBCT), the field of view(FOV) of CBCT is limited with unnecessarily high imaging dose, thus unfavorable for pediatric patients. A solution to this dilemma is to reconstruct 3D CT from kV images obtained at the treatment position. Here, we propose a dual-models framework built with hierarchical ViT blocks. Unlike a proof-of-concept approach, our framework considers kV images as the solo input and can synthesize accurate, full-size 3D CT in real time(within milliseconds). We demonstrate the feasibility of the proposed approach on 10 patients with head and neck (H&N) cancer using image quality(MAE: <45HU), dosimetrical accuracy(Gamma passing rate (2%/2mm/10%)>97%) and patient position uncertainty(shift error: <0.4mm). The proposed framework can generate accurate 3D CT faithfully mirroring real-time patient position, thus significantly improving patient setup accuracy, kee** imaging dose minimum, and maintaining treatment veracity.
△ Less
Submitted 1 April, 2024;
originally announced May 2024.
-
A 25-micron single photon sensitive kinetic inductance detector
Authors:
Peter K. Day,
Nicholas F. Cothard,
Christopher Albert,
Logan Foote,
Elijah Kane,
Byeong H. Eom,
Ritoban Basu Thakur,
Reinier M. J. Janssen,
Andrew Beyer,
Pierre Echternach,
Sven van Berkel,
Steven Hailey-Dunsheath,
Thomas R. Stevenson,
Shahab Dabironezare,
Jochem J. A. Baselmans,
Jason Glenn,
C. Matt Bradford,
Henry G. Leduc
Abstract:
We report measurements characterizing the performance of a kinetic inductance detector array designed for a wavelength of 25 microns and very low optical background level suitable for applications such as a far-infrared instrument on a cryogenically cooled space telescope. In a pulse counting mode of operation at low optical flux, the detectors can resolve individual 25-micron photons. In an integ…
▽ More
We report measurements characterizing the performance of a kinetic inductance detector array designed for a wavelength of 25 microns and very low optical background level suitable for applications such as a far-infrared instrument on a cryogenically cooled space telescope. In a pulse counting mode of operation at low optical flux, the detectors can resolve individual 25-micron photons. In an integrating mode, the detectors remain photon noise limited over more than six orders of magnitude in absorbed power from 70 zW to 200 fW, with a limiting NEP of 4.6 x 10^-20 W/rtHz at 1 Hz. In addition, the detectors are highly stable with flat power spectra under optical load down to 1 mHz. Operational parameters of the detector are determined including the efficiency of conversion of the incident optical power into quasiparticles in the aluminum absorbing element and the quasiparticle self-recombination constant.
△ Less
Submitted 14 May, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
Modeling of cosmic rays and near-IR photons in aluminum KIDs
Authors:
Elijah Kane,
Chris Albert,
Ritoban Basu Thakur,
Charles,
Bradford,
Nicholas Cothard,
Peter Day,
Logan Foote,
Steven Hailey-Dunsheath,
Reinier Janssen,
Henry,
LeDuc,
Lun-Jun,
Liu,
Hien Nguyen,
Jonas Zmuidzinas
Abstract:
The PRobe far-Infrared Mission for Astrophysics (PRIMA) is working to develop kinetic inductance detectors (KIDs) that can meet the sensitivity targets of a far-infrared spectrometer on a cryogenically cooled space telescope. An important ingredient for achieving high sensitivity is increasing the fractional-frequency responsivity. Here we present a study of the responsivity of aluminum KIDs fabri…
▽ More
The PRobe far-Infrared Mission for Astrophysics (PRIMA) is working to develop kinetic inductance detectors (KIDs) that can meet the sensitivity targets of a far-infrared spectrometer on a cryogenically cooled space telescope. An important ingredient for achieving high sensitivity is increasing the fractional-frequency responsivity. Here we present a study of the responsivity of aluminum KIDs fabricated at the Jet Propulsion Laboratory. Specifically, we model the KID's temporal response to pair-breaking excitations in the framework of the Mattis-Bardeen theory, incorporating quasiparticle recombination dynamics and the pair-breaking efficiency. Using a near-IR laser, we measure time-resolved photon pulses and fit them to our model, extracting the time-resolved quasiparticle density and the quasiparticle recombination lifetime. Comparing the fit to the known energy of the laser provides a measurement of the pair-breaking efficiency. In addition to photon-sourced excitations, it is important to understand the KID's response to phonon-sourced excitations from cosmic rays. We measure the rate of secondary cosmic rays detected by our devices, and predict the dead time due to cosmic rays for an array in L2 orbit. This work provides confidence in KIDs' robustness to cosmic ray events in the space environment.
△ Less
Submitted 8 November, 2023;
originally announced November 2023.
-
Characterization of a Far-Infrared Kinetic Inductance Detector Prototype for PRIMA
Authors:
Steven Hailey-Dunsheath,
Sven van Berkel,
Andrew E. Beyer,
Logan Foote,
Reinier M. J. Janssen,
Henry G. LeDuc,
Pierre M. Echternach,
Charles M. Bradford,
Jochem J. A. Baselmans,
Shahab Dabironezare,
Peter K. Day,
Nicholas F. Cothard,
Jason Glenn
Abstract:
The PRobe far-Infrared Mission for Astrophysics (PRIMA) is under study as a potential far-IR space mission, featuring actively cooled optics, and both imaging and spectroscopic instrumentation. To fully take advantage of the low background afforded by a cold telescope, spectroscopy with PRIMA requires detectors with a noise equivalent power (NEP) better than $1 \times 10^{-19}$ W Hz$^{-1/2}$. To m…
▽ More
The PRobe far-Infrared Mission for Astrophysics (PRIMA) is under study as a potential far-IR space mission, featuring actively cooled optics, and both imaging and spectroscopic instrumentation. To fully take advantage of the low background afforded by a cold telescope, spectroscopy with PRIMA requires detectors with a noise equivalent power (NEP) better than $1 \times 10^{-19}$ W Hz$^{-1/2}$. To meet this goal we are develo** large format arrays of kinetic inductance detectors (KIDs) to work across the $25-250$ micron range. Here we present the design and characterization of a single pixel prototype detector optimized for $210$ micron. The KID consists of a lens-coupled aluminum inductor-absorber connected to a niobium interdigitated capacitor to form a 2 GHz resonator. We have fabricated a small array with 28 KIDs, and we measure the performance of one of these detectors with an optical loading in the $0.01 - 300$ aW range. At low loading the detector achieves an NEP of $9\times10^{-20}$ W Hz$^{-1/2}$ at a 10 Hz readout frequency, and the lens-absorber system achieves a good optical efficiency. An extrapolation of these measurements suggest this detector may remain photon noise limited at up to 20 fW of loading, offering a high dynamic range for PRIMA observations of bright astronomical sources.
△ Less
Submitted 17 April, 2024; v1 submitted 6 November, 2023;
originally announced November 2023.
-
High-sensitivity Kinetic Inductance Detector Arrays for the Probe Far-Infrared Mission for Astrophysics
Authors:
Logan Foote,
Chris Albert,
Jochem Baselmans,
Andrew Beyer,
Nicholas Cothard,
Peter Day,
Steven Hailey-Dunsheath,
Pierre Echternach,
Reinier Janssen,
Elijah Kane,
Henry Leduc,
Lun-Jun Liu,
Hien Nguyen,
Joanna Perido,
Jason Glenn,
Jonas Zmuidzinas,
Charles,
Bradford
Abstract:
Far-infrared (far-IR) astrophysics missions featuring actively cooled telescopes will offer orders of magnitude observing speed improvement at wavelengths where galaxies and forming planetary systems emit most of their light. The PRobe far-Infrared Mission for Astrophysics (PRIMA), which is currently under study, emphasizes low and moderate resolution spectroscopy throughout the far-IR. Full utili…
▽ More
Far-infrared (far-IR) astrophysics missions featuring actively cooled telescopes will offer orders of magnitude observing speed improvement at wavelengths where galaxies and forming planetary systems emit most of their light. The PRobe far-Infrared Mission for Astrophysics (PRIMA), which is currently under study, emphasizes low and moderate resolution spectroscopy throughout the far-IR. Full utilization of PRIMA's cold telescope requires far-IR detector arrays with per-pixel noise equivalent powers (NEPs) at or below 1 x 10-19 W/rtHz. We are develo** low-volume Aluminum kinetic inductance detector (KID) arrays to reach these sensitivities. We will present on the development of our long-wavelength (210 um) array approach, with a focus on multitone measurements of our 1,008-pixel arrays. We measure an NEP below 1 x 10-19 W/rtHz for 73 percent of our pixels.
△ Less
Submitted 29 May, 2024; v1 submitted 3 November, 2023;
originally announced November 2023.
-
Parallel Plate Capacitor Aluminum KIDs for Future Far-Infrared Space-Based Observatories
Authors:
Nicholas F. Cothard,
Christopher Albert,
Andrew D. Beyer,
Charles M. Bradford,
Pierre Echternach,
Byeong-Ho Eom,
Logan Foote,
Marc Foote,
Steven Hailey-Dunsheath,
Reinier M. J. Janssen,
Elijah Kane,
Henry LeDuc,
Joanna Perido,
Jason Glenn,
Peter K. Day
Abstract:
Future space-based far-infrared astrophysical observatories will require exquis-itely sensitive detectors consistent with the low optical backgrounds. The PRobe far-Infrared Mission for Astrophysics (PRIMA) will deploy arrays of thousands of superconducting kinetic inductance detectors (KIDs) sensitive to radiation between 25 and 265 $μ$m. Here, we present laboratory characterization of prototype,…
▽ More
Future space-based far-infrared astrophysical observatories will require exquis-itely sensitive detectors consistent with the low optical backgrounds. The PRobe far-Infrared Mission for Astrophysics (PRIMA) will deploy arrays of thousands of superconducting kinetic inductance detectors (KIDs) sensitive to radiation between 25 and 265 $μ$m. Here, we present laboratory characterization of prototype, 25 -- 80 $μ$m wavelength, low-volume, aluminum KIDs designed for the low-background environment expected with PRIMA. A compact parallel plate capacitor is used to minimize the detector footprint and suppress TLS noise. A novel resonant absorber is designed to enhance response in the band of interest. We present noise and optical efficiency measurements of these detectors taken with a low-background cryostat and a cryogenic blackbody. A microlens-hybridized KID array is found to be photon noise limited down to about 50 aW with a limiting detector NEP of about $6.5 \times 10^{-19}~\textrm{W/Hz}^{1/2}$. A fit to an NEP model shows that our optical system is well characterized and understood down to 50 aW. We discuss future plans for low-volume aluminum KID array development as well as the testbeds used for these measurements.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
High-sensitivity transition-edge-sensed bolometers: improved speed and characterization with AC and DC bias
Authors:
Logan Foote,
Michael D. Audley,
Charles,
Bradford,
Gert de Lange,
Pierre Echternach,
Dale J. Fixsen,
Howard Hui,
Matthew Kenyon,
Hien Nguyen,
Roger O'Brient,
Elmer H. Sharp,
Johannes G. Staguhn,
Jan van der Kuur,
Jonas Zmuidzinas
Abstract:
We report on efforts to improve the speed of low-G far-infrared transition-edged-sensed bolometers. We use a fabrication process that does not require any dry etch steps to reduce heat capacity on the suspended device and measure a reduction in the detector time constant. However, we also measure an increase in the temperature-normalized thermal conductance (G), and a corresponding increase in the…
▽ More
We report on efforts to improve the speed of low-G far-infrared transition-edged-sensed bolometers. We use a fabrication process that does not require any dry etch steps to reduce heat capacity on the suspended device and measure a reduction in the detector time constant. However, we also measure an increase in the temperature-normalized thermal conductance (G), and a corresponding increase in the noise-equivalent power (NEP). We employ a new near-IR photon-noise technique using a near-IR laser to calibrate the frequency-domain multiplexed AC system and compare the results to a well-understood DC circuit. We measure an NEP white noise level of 0.8 aW/rtHz with a 1/f knee below 0.1 Hz and a time constant of 3.2 ms.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
Modelling small block aperture in an in-house developed GPU-accelerated Monte Carlo-based dose engine for pencil beam scanning proton therapy
Authors:
Hongying Feng,
Jason M. Holmes,
Sujay A. Vora,
Joshua B. Stoker,
Martin Bues,
William W. Wong,
Terence S. Sio,
Robert L. Foote,
Samir H. Patel,
Jiajian Shen,
Wei Liu
Abstract:
Purpose: To enhance an in-house graphic-processing-unit (GPU) accelerated virtual particle (VP)-based Monte Carlo (MC) proton dose engine (VPMC) to model aperture blocks in both dose calculation and optimization for pencil beam scanning proton therapy (PBSPT)-based stereotactic radiosurgery (SRS). Methods and Materials: A block aperture module was integrated into VPMC. VPMC was validated by an ope…
▽ More
Purpose: To enhance an in-house graphic-processing-unit (GPU) accelerated virtual particle (VP)-based Monte Carlo (MC) proton dose engine (VPMC) to model aperture blocks in both dose calculation and optimization for pencil beam scanning proton therapy (PBSPT)-based stereotactic radiosurgery (SRS). Methods and Materials: A block aperture module was integrated into VPMC. VPMC was validated by an opensource code, MCsquare, in eight water phantom simulations with 3cm thick brass apertures: four were with aperture openings of 1, 2, 3, and 4cm without a range shifter, while the other four were with same aperture opening configurations with a range shifter of 45mm water equivalent thickness. VPMC was benchmarked with MCsquare and RayStation MC for 10 patients with small targets (average volume 8.4 cc). Finally, 3 patients were selected for robust optimization with aperture blocks using VPMC. Results: In the water phantoms, 3D gamma passing rate (2%/2mm/10%) between VPMC and MCsquare were 99.71$\pm$0.23%. In the patient geometries, 3D gamma passing rates (3%/2mm/10%) between VPMC/MCsquare and RayStation MC were 97.79$\pm$2.21%/97.78$\pm$1.97%, respectively. The calculation time was greatly decreased from 112.45$\pm$114.08 seconds (MCsquare) to 8.20$\pm$6.42 seconds (VPMC), both having statistical uncertainties of about 0.5%. The robustly optimized plans met all the dose-volume-constraints (DVCs) for the targets and OARs per our institutional protocols. The mean calculation time for 13 influence matrices in robust optimization by VPMC was 41.6 seconds. Conclusion: VPMC has been successfully enhanced to model aperture blocks in dose calculation and optimization for the PBSPT-based SRS.
△ Less
Submitted 3 July, 2023;
originally announced July 2023.
-
A 16-Year Photometric Campaign on the Eclipsing Novalike Variable DW Ursae Majoris
Authors:
D. R. S. Boyd,
E. de Miguel,
J. Patterson,
M. A. Wood,
D. Barrett,
J. Boardman,
O. Brettman,
D. Cejudo,
D. Collins,
L. M. Cook,
M. J. Cook,
J. L. Foote,
R. Fried,
T. L. Gomez,
F. -J. Hambsch,
J. L. Jones,
J. Kemp,
R. Koff,
M. Koppelman,
T. Krajci,
D. Lemay,
B. Martin,
J. V. McClusky,
K. Menzies,
D. Messier
, et al. (7 additional authors not shown)
Abstract:
We present an analysis of photometric observations of the eclipsing novalike variable DW UMa made by the CBA consortium between 1999 and 2015. Analysis of 372 new and 260 previously published eclipse timings reveals a 13.6 year period or quasi-period in the times of minimum light. The seasonal light curves show a complex spectrum of periodic signals: both positive and negative superhumps, likely a…
▽ More
We present an analysis of photometric observations of the eclipsing novalike variable DW UMa made by the CBA consortium between 1999 and 2015. Analysis of 372 new and 260 previously published eclipse timings reveals a 13.6 year period or quasi-period in the times of minimum light. The seasonal light curves show a complex spectrum of periodic signals: both positive and negative superhumps, likely arising from a prograde apsidal precession and a retrograde nodal precession of the accretion disc. These signals appear most prominently and famously as sidebands of the orbital frequency but the precession frequencies themselves, at 0.40 and 0.22 cycles per day, are also seen directly in the power spectrum. The superhumps are sometimes seen together and sometimes separately. The depth, width and skew of eclipses are all modulated in phase with both nodal and apsidal precession of the tilted and eccentric accretion disc. The superhumps, or more correctly the precessional motions which produce them, may be essential to understanding the mysterious SW Sextantis syndrome. Disc wobble and eccentricity can both produce Doppler signatures inconsistent with the true dynamical motions in the binary, and disc wobble might boost the mass-transfer rate by enabling the hot white dwarf to directly irradiate the secondary star.
△ Less
Submitted 20 December, 2016;
originally announced December 2016.
-
Tractrices, Bicycle Tire Tracks, Hatchet Planimeters, and a 100-year-old Conjecture
Authors:
R. L. Foote,
M. Levi,
S. Tabachnikov
Abstract:
Geometry of the tracks left by a bicycle is closely related with the so-called Prytz planimeter and with linear fractional transformations of the complex plane. We describe these relations, along with the history of the problem, and give a proof of a conjecture made by Menzin in 1906.
Geometry of the tracks left by a bicycle is closely related with the so-called Prytz planimeter and with linear fractional transformations of the complex plane. We describe these relations, along with the history of the problem, and give a proof of a conjecture made by Menzin in 1906.
△ Less
Submitted 3 July, 2012;
originally announced July 2012.
-
Infinitesimal isometries along curves and generalized Jacobi equations
Authors:
Robert L. Foote,
Chong-Kyu Han,
Jong-Won Oh
Abstract:
A Jacobi field on a Riemannian manifold M is defined along a geodesic. We generalize this notion to an arbitrary smooth curve, and call it an infinitesimal isometry along the curve. We give two approaches to this: 1) compute the complete prolongation of the Killing equation and then restrict to the curve, and 2) compute the variational equations of a rigid motion of the curve. This results in Kill…
▽ More
A Jacobi field on a Riemannian manifold M is defined along a geodesic. We generalize this notion to an arbitrary smooth curve, and call it an infinitesimal isometry along the curve. We give two approaches to this: 1) compute the complete prolongation of the Killing equation and then restrict to the curve, and 2) compute the variational equations of a rigid motion of the curve. This results in Killing transport along the curve, which is parallel transport for a related connection on the jet bundle J(TM). We study the curvature and holonomy of this connection. In particular, in dimension two the curvature is the local obstruction to infinitesimal isometries on M.
△ Less
Submitted 15 September, 2011; v1 submitted 3 June, 2009;
originally announced June 2009.
-
Integral-Geometric Formulas for Perimeter in S^2, H^2, and Hilbert Planes
Authors:
Ralph Alexander,
I. D. Berg,
Robert L. Foote
Abstract:
We develop two types of integral formulas for the perimeter of a convex body K in planar geometries. We derive Cauchy-type formulas for perimeter in planar Hilbert geometries. Specializing to H^2 we get a formula that appears to be new. We show that it implies the standard Cauchy-Santalo formula involving a central angle from an origin and the distance to the corresponding support line. The Mink…
▽ More
We develop two types of integral formulas for the perimeter of a convex body K in planar geometries. We derive Cauchy-type formulas for perimeter in planar Hilbert geometries. Specializing to H^2 we get a formula that appears to be new. We show that it implies the standard Cauchy-Santalo formula involving a central angle from an origin and the distance to the corresponding support line. The Minkowski formula for perimeter in E^2 involves polar coordinates and the geodesic curvature of the boundary of K. We generalize this to S^2 and H^2. In E^2 the Cauchy and Minkowski formulas are locally equivalent in the sense that the integrands are pointwise equal. In contrast, their generalizations in H^2 and S^2 are not locally equivalent.
△ Less
Submitted 15 March, 2005;
originally announced March 2005.
-
Geometry of the Prytz Planimeter
Authors:
Robert L. Foote
Abstract:
The Prytz planimeter is a simple example of a system governed by a non-holonomic constraint. It is unique among planimeters in that it measures something more subtle than area, combining the area, centroid and other moments of the region being measured, with weights depending on the length of the planimeter. As a tool for measuring area, it is most accurate for regions that are small relative to…
▽ More
The Prytz planimeter is a simple example of a system governed by a non-holonomic constraint. It is unique among planimeters in that it measures something more subtle than area, combining the area, centroid and other moments of the region being measured, with weights depending on the length of the planimeter. As a tool for measuring area, it is most accurate for regions that are small relative to its length.
The configuration space of the planimeter is a non-principal circle bundle acted on by SU(1,1), (isom. to SL(2,R)). The motion of the planimeter is realized as parallel translation for a connection on this bundle and for a connection on a principal SU(1,1)-bundle. The holonomy group is SU(1,1). As a consequence, the planimeter is an example of a system with a phase shift on the circle that is not a simple rotation.
There is a qualitative difference in the holonomy when tracing large regions as opposed to small ones. Generic elements of SU(1,1) act on S^1 with two fixed points or with no fixed points. When tracing small regions, the holonomy acts without fixed points. Menzin's conjecture states (roughly) that if a planimeter of length L traces the boundary of a region with area A > pi L^2, then it exhibits an asymptotic behavior and the holonomy acts with two fixed points, one attracting and one repelling. This is obvious if the region is a disk, and intuitively plausible if the region is convex and A >> pi L^2. A proof of this conjecture is given for a special case, and the conjecture is shown to imply the isoperimetric inequality.
△ Less
Submitted 16 August, 1998;
originally announced August 1998.
