-
Length and torsion dependence of thermal conductivity in twisted graphene nanoribbons
Authors:
Alexandre F. Fonseca,
Luiz Felipe C. Pereira
Abstract:
Research on the physical properties of materials at the nanoscale is crucial for the development of breakthrough nanotechnologies. One of the key properties to consider is the ability to conduct heat, i.e., its thermal conductivity. Graphene is a remarkable nanostructure with exceptional physical properties, including one of the highest thermal conductivities (TC) ever measured. Graphene nanoribbo…
▽ More
Research on the physical properties of materials at the nanoscale is crucial for the development of breakthrough nanotechnologies. One of the key properties to consider is the ability to conduct heat, i.e., its thermal conductivity. Graphene is a remarkable nanostructure with exceptional physical properties, including one of the highest thermal conductivities (TC) ever measured. Graphene nanoribbons (GNRs) share most fundamental properties with graphene, with the added benefit of having a controllable electronic bandgap. One method to achieve such control is by twisting the GNR, which can tailor its electronic properties, as well as change their TC. Here, we revisit the dependence of the TC of twisted GNRs (TGNRs) on the number of applied turns to the GNR by calculating more precise and mathematically well defined geometric parameters related to the TGNR shape, namely, its twist and writhe. We show that the dependence of the TC on twist is not a simple function of the number of turns initially applied to a straight GNR. In fact, we show that the TC of TGNRs requires at least two parameters to be properly described. Our conclusions are supported by atomistic molecular dynamics simulations to obtain the TC of suspended TGNRs prepared under different values of initially applied turns and different sizes of their suspended part. Among possible choices of parameter pairs, we show that TC can be appropriately described by the initial number of turns and the initial twist density of the TGNRs.
△ Less
Submitted 30 April, 2024;
originally announced April 2024.
-
Elastocaloric Effect in Graphene Kirigami
Authors:
Luiz A. Ribeiro Junior,
Marcelo L. Pereira Junior,
Alexandre F. Fonseca
Abstract:
Kirigami, a traditional Japanese art of paper-cutting, has recently been explored for its elastocaloric effect (ECE) in kirigami-based materials (KMs), where applying strain induces temperature changes. In this study, we investigate the ECE in a nanoscale graphene kirigami (GK) monolayer, representing the thinnest possible KM, to better understand this phenomenon. Through molecular dynamics simula…
▽ More
Kirigami, a traditional Japanese art of paper-cutting, has recently been explored for its elastocaloric effect (ECE) in kirigami-based materials (KMs), where applying strain induces temperature changes. In this study, we investigate the ECE in a nanoscale graphene kirigami (GK) monolayer, representing the thinnest possible KM, to better understand this phenomenon. Through molecular dynamics simulations, we analyze the temperature change and coefficient of performance (COP) of the nanoscale GK architecture. Our findings reveal that while GKs lack the intricate temperature changes observed in macroscopic KMs, they exhibit a substantial temperature change of approximately 9.32 K (23 times higher than that of macroscopic KMs, which is about 0.4K) for heating and -3.50 K for cooling. Additionally, they demonstrate reasonable COP values of approximately 1.57 and 0.62, respectively. It is noteworthy that the one-atom-thick graphene configuration prevents the occurrence of the complex temperature distribution observed in macroscopic KMs.
△ Less
Submitted 17 June, 2023;
originally announced June 2023.
-
Fully Atomistic Molecular Dynamics Investigation of the Simplest Model of Dry-Draw Fabrication of Carbon Nanotube Fibers
Authors:
Luís F. V. Thomazini,
Alexandre F. Fonseca
Abstract:
Macroscopic assemblies of carbon nanotubes (CNTs) are desirable materials because of the excellent CNT properties. Amongst the methods of production of these CNT materials, the dry-draw fabrication where CNT fibers (CNTFs) are directly pulled out from a CNT forest is known to provide good physical properties. Although it is known that vertical alignment of CNT bundles within the CNT forest is impo…
▽ More
Macroscopic assemblies of carbon nanotubes (CNTs) are desirable materials because of the excellent CNT properties. Amongst the methods of production of these CNT materials, the dry-draw fabrication where CNT fibers (CNTFs) are directly pulled out from a CNT forest is known to provide good physical properties. Although it is known that vertical alignment of CNT bundles within the CNT forest is important, the mechanisms behind the dry-draw fabrication of CNTFs are still not completely understood. The simplest known dry-draw model consists of CNT bundles laterally interacting by only van der Waals forces (vdWf). Here, by fully atomistic classical molecular dynamics simulations, we show that the simplest dry-draw model does not produce CNTFs. We also show one important condition for a pair of adjacent CNT bundles to connect themselves under vdWf only and discuss why it leads to the failure of the simplest model.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
Exploring the Elastic Properties and Fracture Patterns of Me-Graphene Monolayers and Nanotubes through Reactive Molecular Dynamics Simulations
Authors:
Marcelo L. Pereira Junior,
José. M. De Sousa,
Wjefferson H. S. Brandão,
Douglas. S. Galvão,
Alexandre F. Fonseca,
Luiz A. Ribeiro Junior
Abstract:
Me-graphene (MeG) is a novel two-dimensional (2D) carbon allotrope. Due to its attractive electronic and structural properties, it is important to study the mechanical behavior of MeG in its monolayer and nanotube topologies. In this work, we conducted fully atomistic reactive molecular dynamics simulations using the Tersoff force field to investigate their mechanical properties and fracture patte…
▽ More
Me-graphene (MeG) is a novel two-dimensional (2D) carbon allotrope. Due to its attractive electronic and structural properties, it is important to study the mechanical behavior of MeG in its monolayer and nanotube topologies. In this work, we conducted fully atomistic reactive molecular dynamics simulations using the Tersoff force field to investigate their mechanical properties and fracture patterns. Our results indicate that Young's modulus of MeG monolayers is about 414 GPa and in the range of 421-483 GPa for the nanotubes investigated here. MeG monolayers and MeGNTs directly undergo from elastic to complete fracture under critical strain without a plastic regime.
△ Less
Submitted 23 October, 2023; v1 submitted 13 March, 2023;
originally announced March 2023.
-
First-Principles and Reactive Molecular Dynamics Study of the Elastic Properties of Pentahexoctite-based Nanotubes
Authors:
W. H. S. Brandão,
J. M. De Sousa,
A. L. Aguiar,
D. S. Galvão,
L. A. Ribeiro Junior,
Alexandre F. Fonseca
Abstract:
Pentahexoctite (PH) is a pure sp$^2$ hybridized planar carbon allotrope whose structure consists of a symmetric combination of pentagons, hexagons, and octagons. The proposed PH structure was shown to be an intrinsically metallic material exhibiting good mechanical and thermal stability. PH nanotubes (PHNTs) have also been proposed, and their properties were obtained from first principles calculat…
▽ More
Pentahexoctite (PH) is a pure sp$^2$ hybridized planar carbon allotrope whose structure consists of a symmetric combination of pentagons, hexagons, and octagons. The proposed PH structure was shown to be an intrinsically metallic material exhibiting good mechanical and thermal stability. PH nanotubes (PHNTs) have also been proposed, and their properties were obtained from first principles calculations. Here, we carried out fully-atomistic simulations, combining reactive (ReaxFF) molecular dynamics (MD) and density functional theory (DFT) methods, to study the PHNTs elastic properties and fracture patterns. We have investigated the mechanical properties behavior as a function of the tube diameter and temperature regimes. Our results showed that the PHNTs, when subjected to large tensile strains, undergo abrupt structural transitions exhibiting brittle fracture patterns without a plastic regime.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Quantum Rate as a Spectroscopic Methodology for Measuring the Electronic Structure of Quantum Dots
Authors:
Edgar Fabian Pinzón,
Laís Cristine Lopes,
André Felipe Vale da Fonseca,
Marco Antonio Schiavon,
Paulo Roberto Bueno
Abstract:
The electronic structure of nanoscale moieties (such as molecules and quantum dots) governs the properties and performance of the bottom-up fabricated devices based on their assemblies. Accordingly, simple and faster experimental methods that permit to resolve the electronic density of states of these nanoscale materials (of which quantum dots are a particular example) are of great importance for…
▽ More
The electronic structure of nanoscale moieties (such as molecules and quantum dots) governs the properties and performance of the bottom-up fabricated devices based on their assemblies. Accordingly, simple and faster experimental methods that permit to resolve the electronic density of states of these nanoscale materials (of which quantum dots are a particular example) are of great importance for the development of man-made nanoscale interfaces and nanoelectronics. In the present work, we propose the quantum rate spectroscopy methodology (and introduce the fundamental physical basis of this technique) as a tool for resolving the electronic structure of zero-dimensional (quantum dot) structures at room temperature and environmental pressure conditions. This method is simpler than the traditional methods based on scanning tunneling microscopy. This spectroscopic approach based on the quantum rate theory was demonstrated for CdTe quantum dots, and was used to measure a spectrum that provides discrete energy levels that are consistent with those obtained by tunneling microscopy measurements.
△ Less
Submitted 22 February, 2024; v1 submitted 18 February, 2023;
originally announced February 2023.
-
Density dependence of elastic properties of graphynes
Authors:
Guilherme B. Kanegae,
Alexandre F. Fonseca
Abstract:
Graphyne is a two-dimensional carbon allotrope of graphene. Its structure is composed of aromatic rings and/or carbon-carbon bonds connected by one or more acetylene chains. As some graphynes present the most of the excellent properties of graphene and non-null bandgap, they have been extensively studied. Recently, Kanegae and Fonseca reported calculations of four elastic properties of 70 graphyne…
▽ More
Graphyne is a two-dimensional carbon allotrope of graphene. Its structure is composed of aromatic rings and/or carbon-carbon bonds connected by one or more acetylene chains. As some graphynes present the most of the excellent properties of graphene and non-null bandgap, they have been extensively studied. Recently, Kanegae and Fonseca reported calculations of four elastic properties of 70 graphynes, ten members of the seven families of graphynes [Carbon Trends 7, 100152 (2022)]. They showed that the acetylene chain length dependence of these properties can be simply modelled by a serial association of springs. Here, based on those results, we present the density dependence of these properties and show that the elastic moduli, $E$, of graphyne are less dependent on density, $ρ$, than porous cellular materials with an exponent of $E \sim ρ^{n}$, smaller than 2. We discuss the results in terms of the shape of the pores of the graphyne structures.
△ Less
Submitted 17 February, 2023;
originally announced February 2023.
-
On the Mechanical, Electronic, and Optical Properties of 8-16-4 Graphyne: A 2D Carbon Allotrope with Dirac Cones
Authors:
Raphael M. Tromer,
Marcelo L. Pereira Junior,
Kleuton A. L. Lima,
Alexandre F. Fonseca,
Luciano R. da Silva,
Douglas S. Galvao,
Luiz A. Ribeiro Junior
Abstract:
Due to the success achieved by graphene, several 2D carbon-based allotropes were theoretically predicted and experimentally synthesized. We used density functional theory and reactive molecular dynamics simulations to investigate the mechanical, structural, electronic, and optical properties of 8-16-4 Graphyne. The results showed that this material exhibits good dynamical and thermal stabilities.…
▽ More
Due to the success achieved by graphene, several 2D carbon-based allotropes were theoretically predicted and experimentally synthesized. We used density functional theory and reactive molecular dynamics simulations to investigate the mechanical, structural, electronic, and optical properties of 8-16-4 Graphyne. The results showed that this material exhibits good dynamical and thermal stabilities. Its formation energy and elastic moduli are -8.57 eV/atom and 262.37 GPa, respectively. This graphyne analogue is a semi-metal and presents two Dirac cones in its band structure. Moreover, it is transparent, and its intense optical activity is limited to the infrared region. Remarkably, the band structure of 8-16-4 Graphyne remains practically unchanged at even moderate strain regimes. As far as we know, this is the first 2D carbon allotrope to exhibit this behavior.
△ Less
Submitted 3 March, 2023; v1 submitted 16 February, 2023;
originally announced February 2023.
-
Scalable synthesis and characterization of multilayer $γ$-graphyne, new carbon crystals with a small direct bandgap
Authors:
Victor G. Desyatkin,
William B. Martin,
Ali E. Aliev,
Nathaniel E. Chapman,
Alexandre F. Fonseca,
Douglas S. Galvão,
E. Roy Miller,
Kevin H. Stone,
Zhong Wang,
Dante Zakhidov,
F. Ted Limpoco,
Sarah R. Almahdali,
Shane M. Parker,
Ray H. Baughman,
Valentin O. Rodionov
Abstract:
$γ$-Graphyne is the most symmetric sp2/sp1 allotrope of carbon, which can be viewed as graphene uniformly expanded through insertion of two-carbon acetylenic units between all the aromatic rings. To date, synthesis of bulk $γ$-graphyne has remained a challenge. We here report the synthesis of multilayer $γ…
▽ More
$γ$-Graphyne is the most symmetric sp2/sp1 allotrope of carbon, which can be viewed as graphene uniformly expanded through insertion of two-carbon acetylenic units between all the aromatic rings. To date, synthesis of bulk $γ$-graphyne has remained a challenge. We here report the synthesis of multilayer $γ$-graphyne through crystallization-assisted irreversible cross-coupling polymerization. Comprehensive characterization of this new carbon phase is described, including synchrotron X-ray diffraction, electron diffraction, lateral force microscopy, Raman and infrared spectroscopy, and cyclic voltammetry. Experiments indicate that $γ$-graphyne is a 0.48 eV bandgap semiconductor, with a hexagonal a-axis spacing of 6.88 Å and an interlayer spacing of 3.48 Å, which is consistent with theoretical predictions. The observed crystal structure has an aperiodic sheet stacking. The material is thermally stable up to 240 $^\circ$C but undergoes a transformation at higher temperatures. While conventional 2D polymerizations and reticular chemistry rely on error correction through reversibility, we demonstrate that a periodic covalent lattice can be synthesized under purely kinetic control. The reported methodology is scalable and inspires extension to other allotropes of the graphyne family.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
Investigating thermal transport in knotted graphene nanoribbons using non-equilibrium molecular dynamics
Authors:
Levi C. Felix,
Alexandre F. Fonseca,
Douglas S. Galvao
Abstract:
In this work, we investigated the effect of knots in the thermal transport of graphene nanoribbons through non-equilibrium molecular dynamics simulations. We considered the cases of one, two, and three knots are present. Temperature jumps appear in the temperature profile where the knots are located, which indicates that they introduce thermal resistances in the system, similar to interfacial Kapi…
▽ More
In this work, we investigated the effect of knots in the thermal transport of graphene nanoribbons through non-equilibrium molecular dynamics simulations. We considered the cases of one, two, and three knots are present. Temperature jumps appear in the temperature profile where the knots are located, which indicates that they introduce thermal resistances in the system, similar to interfacial Kapitza resistance present between two different materials and/or single materials with defects and/or lattice distortions. We found that the thermal resistance introduced by each individual knot is essentially the same as the overall resistance increase linearly with the number of knots, as they behave as thermal resistances associated in series. Also, the relative position between each knot in the arrangement does not strongly affect the thermal current produced by the temperature gradient, showing a weak thermal rectification effect.
△ Less
Submitted 2 August, 2022;
originally announced August 2022.
-
Fully Atomistic Molecular Dynamics Simulations of Elastic Properties of Tetragraphene Monolayer
Authors:
Wjefferson H. S. Brandão,
Acrisio L. Aguiar,
Alexandre F. Fonseca,
D. S. Galvão,
J. M. De Sousa
Abstract:
A quasi-2D semiconductor carbon allotrope called tetrahexcarbon, also named tetragraphene, was recently proposed featuring an unusual structure combining squared and hexagonal rings. Mechanical and electronic properties of tetragraphene have been predicted based on first-principles Density Functional Theory (DFT) calculations. However, a comprehensive study of its mechanical behavior under differe…
▽ More
A quasi-2D semiconductor carbon allotrope called tetrahexcarbon, also named tetragraphene, was recently proposed featuring an unusual structure combining squared and hexagonal rings. Mechanical and electronic properties of tetragraphene have been predicted based on first-principles Density Functional Theory (DFT) calculations. However, a comprehensive study of its mechanical behavior under different temperatures is still lacking. In this work, using fully atomistic reactive molecular dynamics (MD) simulations, we investigate the mechanical properties of monolayer tetragraphene under tensile strain from the linear regime up to the complete structural failure (fracture). Different temperatures were considered and the results were compared to that of two other known planar carbon allotropes: graphene and penta-graphene. One interesting result is that tetragraphene experiences a transition from crystalline to an amorphous structure by either temperature or tension application. At room temperature, the critical strains along the two orthogonal unit-cell directions of tetragraphene are 38\% and 30\%, which is higher than that for graphene and penta-graphene. Tetragraphene Young's modulus values along its directions are from three to six times smaller than that of graphene and about 57\% that of penta-graphene at room temperature. Ultimate tensile strength values along the two directions of tetragraphene were obtained and also shown to be smaller than that of graphene and penta-graphene.
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
High performance of carbon nanotube refrigerators over a large temperature span
Authors:
Tatiana Naomi Yamamoto Silva,
Alexandre F. Fonseca
Abstract:
Compression of greenhouse gases still dominates the market of refrigeration devices. Although well stablished and efficient, this technology is neither safe for the environment nor able to be scaled down to nanoscale. Solid-state cooling technologies are being developed to overcome these limitations, including studies at nanoscale. Among them, the so-called elastocaloric effect (eC) consists of th…
▽ More
Compression of greenhouse gases still dominates the market of refrigeration devices. Although well stablished and efficient, this technology is neither safe for the environment nor able to be scaled down to nanoscale. Solid-state cooling technologies are being developed to overcome these limitations, including studies at nanoscale. Among them, the so-called elastocaloric effect (eC) consists of the thermal response, $ΔT$, of a material under strain deformation. In this work, fully atomistic molecular dynamics simulations of the eC in carbon nanotubes (CNTs) are presented over a large temperature span. The efficiency of the CNTs as solid refrigerators is investigated by simulating their eC in a model of refrigerator machine running under Otto-like thermodynamic cycles (two adiabatic expansion/contraction plus two isochoric heat exchange processes) operating at temperatures, $T_\mbox{O}$, ranging from 300 to 2000 K. The coefficient-of-performance (COP), defined as the ratio of heat removed from the cold region to the total work performed by the system per thermodynamic cycle, is calculated for each value of $T_\mbox{O}$. Our results show a non-linear dependence of $ΔT$ on $T_\mbox{O}$, reaching a minimum value of about 30 K for $T_\mbox{O}$ between 500 and 600 K, then growing and converging to a linear dependence on $T_\mbox{O}$ for large temperatures. The COP of CNTs is shown to remain about the same and approximately equal to 8. These results are shown to be weakly depend on CNT diameter and chirality but not on length. The isothermal entropy change of the CNTs due to the eC is also estimated and shown to depend non-linearly on $T_\mbox{O}$ values. These results predict that CNTs can be considered versatile nanoscale solid refrigerators able to efficiently work over a large temperature span.
△ Less
Submitted 27 June, 2022;
originally announced June 2022.
-
Air filtration from sarin/air mixture by porous graphene-oxide membranes: a molecular dynamics study
Authors:
Marco A. E. Maria,
Alexandre F. Fonseca
Abstract:
Sarin is a very lethal synthetic organophosphorated compound that inhibits the nervous system muscle control. Although not used as a chemical weapon anymore, it still worries the authorities regarding possible use by terrorists. Most of the studies about sarin are theoretical/computational due to its high lethality and are concentrated in its detection and degradation. Few studies are about air fi…
▽ More
Sarin is a very lethal synthetic organophosphorated compound that inhibits the nervous system muscle control. Although not used as a chemical weapon anymore, it still worries the authorities regarding possible use by terrorists. Most of the studies about sarin are theoretical/computational due to its high lethality and are concentrated in its detection and degradation. Few studies are about air filtration from sarin gas. Here, the potential of graphene oxide-based membranes to filter air from sarin/air mixtures is investigated by classical molecular dynamics simulations. Membranes formed by one and two nanosheets of porous reduced graphene oxide (rGO) were considered. The passage of sarin and air molecules through these membranes from a highly concentrated region to an empty one, is evaluated as a function of temperature and sarin/air relative concentration. Sarin molecules are shown to be trapped by hydroxyl and carboxyl chemical groups in the nanosheet, while a considerable passage of air molecules (N$_2$, O$_2$ and Ar) through the membranes was verified. The results show the capacity of the rGO membranes to retain sarin from passing through, even at high temperatures, thus indicating their potential to be used as a filter for sarin gas.
△ Less
Submitted 13 December, 2021; v1 submitted 7 December, 2021;
originally announced December 2021.
-
Effective acetylene length dependence of the elastic properties of different kinds of graphynes
Authors:
Guilherme B. Kanegae,
Alexandre F. Fonseca
Abstract:
Graphyne is a planar network of connected carbon chains, each formed by $n$ acetylene linkages. Uncountable ways to make these connections lead to uncountable structural graphyne families (GFs). As the synthesis of graphynes with $n > 1$ has been reported in literature, it is of interest to find out how their physical properties depend on $n$ for each possible GF. Although literature already prese…
▽ More
Graphyne is a planar network of connected carbon chains, each formed by $n$ acetylene linkages. Uncountable ways to make these connections lead to uncountable structural graphyne families (GFs). As the synthesis of graphynes with $n > 1$ has been reported in literature, it is of interest to find out how their physical properties depend on $n$ for each possible GF. Although literature already present specific models to describe the dependence on $n$ of the elastic properties of specific GFs, there is not yet enough amount of data for the physical properties of different graphynes with different values of $n$. Based on fully atomistic molecular dynamics simulations, the Young's modulus, shear modulus, linear compressibility and Poisson's ratio of 10 graphyne members of 7 different GFs are calculated. A simple elastic model consisting of a serial combination of $n$ springs is proposed to describe the dependence on $n$ of the elastic properties of these 7 GFs. We show that except for the Poisson's ratio, this simple unique elastic model is able to numerically describe, with good precision, the Young's modulus, shear modulus and linear compressibility of all different graphynes, including anisotropy and negative values of linear compressibility of some GFs.
△ Less
Submitted 22 November, 2021;
originally announced November 2021.
-
Auxetic properties of a newly proposed $γ$-graphyne-like material
Authors:
Ricardo Paupitz,
Tales J. da Silva,
Marilia J. Caldas,
Douglas S. Galvão,
Alexandre F. Fonseca
Abstract:
In this work, we propose a new auxetic (negative Poisson's ratio values) structure, based on a $γ$-graphyne structure, here named $AγG$ $structure$. Graphynes are 2D carbon allotropes with phenylic rings connected by acetylenic groups. The A$γ$G structural/mechanical and electronic properties, as well as its thermal stability, were investigated using classical reactive and quantum molecular dynami…
▽ More
In this work, we propose a new auxetic (negative Poisson's ratio values) structure, based on a $γ$-graphyne structure, here named $AγG$ $structure$. Graphynes are 2D carbon allotropes with phenylic rings connected by acetylenic groups. The A$γ$G structural/mechanical and electronic properties, as well as its thermal stability, were investigated using classical reactive and quantum molecular dynamics simulations. We found that A$γ$G has a large bandgap of 2.48 eV and is thermally stable at a large range of temperatures. It presents a Young's modulus that is an order of magnitude smaller than that of graphene or $γ$-graphyne. The classical and quantum results are consistent and validate that the A$γ$G is auxetic, both when isolated (vacuum) and when deposited on a copper substrate. We believe that this is the densest auxetic structure belonging to the graphyne-like families.
△ Less
Submitted 9 September, 2021;
originally announced September 2021.
-
Twisting or untwisting graphene twisted nanoribbons without rotation
Authors:
Alexandre F. Fonseca
Abstract:
The common sense regarding twisting or untwisting a ribbon is that it requires the application of an external rotation to happen. However, at nanoscale, the application of precise amounts of rotation on a nanoribbon is not a trivial task. Here, the concept of an alternative method to add twist to or remove twist from a twisted graphene nanoribbon (TGNR) without rotation is presented. The method co…
▽ More
The common sense regarding twisting or untwisting a ribbon is that it requires the application of an external rotation to happen. However, at nanoscale, the application of precise amounts of rotation on a nanoribbon is not a trivial task. Here, the concept of an alternative method to add twist to or remove twist from a twisted graphene nanoribbon (TGNR) without rotation is presented. The method consists of suspending a TGNR on two separate substrates and by changing only their distance, the total amount of twist of the TGNR is shown to change. The possibility to fine-tuning the amount of twist of a TGNR is also shown. The concept is demonstrated through fully atomistic molecular dynamics simulations and numerical calculations of the topological parameters twist and writhe of a TGNR. It is shown that the above process satisfies the so-called linking number theorem of space curves. Besides being experimentally feasible, this concept reveals a new kind of twist to writhe transition phenomenon that is tension-free and does not require controlling neither the nanoribbon end-to-end distance nor its critical twist density.
△ Less
Submitted 1 July, 2021; v1 submitted 20 March, 2021;
originally announced March 2021.
-
Sarin and Air Permeation Through a Nanoporous Graphene
Authors:
Marco A. Maria,
Alexandre F. Fonseca
Abstract:
Sarin gas is a dangerous chemical warfare agent (CWA). It is a nerve agent capable of bringing a person to death in about 15 minutes. A lethal concentration of sarin molecules in air is about 30 mg/m3. Experimental research on this gas requires very careful safety protocols for handling and storage. Therefore, theoretical and computational studies on sarin gas are very welcome and might provide im…
▽ More
Sarin gas is a dangerous chemical warfare agent (CWA). It is a nerve agent capable of bringing a person to death in about 15 minutes. A lethal concentration of sarin molecules in air is about 30 mg/m3. Experimental research on this gas requires very careful safety protocols for handling and storage. Therefore, theoretical and computational studies on sarin gas are very welcome and might provide important safe guides towards the management of this lethal substance. In this work, we investigated the interactions between sarin, air and nanoporous graphene, using tools of classical molecular dynamics simulations. Aiming to cast some light in the possible sarin selective filtration by graphene, we designed a bipartite simulation box with a porous graphene nanosheet placed at the middle. Sarin and air molecules were initially placed only on one side of the box so as to create an initial pressure towards the passage of both to the other side. The box dimensions were chosen so that the hole in the graphene was the only possible way through which sarin and air molecules can get to the other side of the box. The number of molecules that passed through the hole in graphene was monitored during 10 ns of simulation and the results for different temperatures were compared. The results show that, as far as the size of the holes are small, van der Waals forces between graphene and the molecules play a significant role on kee** sarin near graphene, at room temperature.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
Graphene-based Nanoscale version of da Vinci's Reciprocal Structures
Authors:
Alexandre F. Fonseca,
Douglas S. Galvao
Abstract:
A reciprocal structure (RS) is a mechanical resistant structure formed by a set of self-supporting elements satisfying certain conditions of structural reciprocity (SR) . The first condition is that each element of the structure has to support and be supported by the others. The second condition is that these functions cannot occur in the same part of the element. These two properties make beams a…
▽ More
A reciprocal structure (RS) is a mechanical resistant structure formed by a set of self-supporting elements satisfying certain conditions of structural reciprocity (SR) . The first condition is that each element of the structure has to support and be supported by the others. The second condition is that these functions cannot occur in the same part of the element. These two properties make beams and two-dimensional materials very much appropriate to build RSs. Commonly seen in floors or roofs, SR is also present in art, religious symbols and decorative objects. Da Vinci has drawn several examples of such RSs. Here, we propose a simple nano version of a da Vinci's RS based on graphene nanoribbons. The stability and resistance against mechanical impacts (ballistic projectile) were investigated through fully atomistic molecular dynamics (MD) simulations. We considered structures with three and four joins with and without RS topologies. Our MD results showed that structures with RS topologies are more impact resistant than those without SR, despite the fact that the used graphene nanoribbons are highly pliable. We discuss these results in terms of the number of joins, energy absorption and stress on the structures. We discuss possible applications in nanoengineering.
△ Less
Submitted 18 November, 2020; v1 submitted 27 January, 2020;
originally announced January 2020.
-
Elastic and Fracture Properties of Single Walled Pentagraphene Nanotubes
Authors:
J. M. De Sousa,
A. L. Aguiar,
E. C. Girão,
Alexandre F. Fonseca,
V. R. Coluci,
D. S. Galvão
Abstract:
Membranes of carbon allotropes comprised solely of densely packed pentagonal rings, known as pentagraphene, exhibit negative Poisson's ratio (auxetic behavior) and a bandgap of $3.2$ eV. In this work, we investigated the structural stability, mechanical and fracture properties of nanotubes formed by rolling up pentagraphene membranes, the so-called pentagraphene nanotubes (PGNTs). Single-walled PG…
▽ More
Membranes of carbon allotropes comprised solely of densely packed pentagonal rings, known as pentagraphene, exhibit negative Poisson's ratio (auxetic behavior) and a bandgap of $3.2$ eV. In this work, we investigated the structural stability, mechanical and fracture properties of nanotubes formed by rolling up pentagraphene membranes, the so-called pentagraphene nanotubes (PGNTs). Single-walled PGNT of three distinct configurations: zigzag, $α$-armchair, and $β$-armchair were studied combining first-principles calculations and reactive molecular dynamics simulations. Our results showed Young's modulus values of $680-800 GPa$, critical strain of $18-21\%$, and ultimate tensile stress of $85-110 GPa$. We also observed auxetic behavior. During stretching at room temperature, we observed a transition between $β$-armchair to $α$-armchair PGNT close to the critical strain. With relation to fracture patterns, we observed that mechanical failure starts at bonds mostly aligned to the stretching direction and after tube radial collapse.
△ Less
Submitted 27 November, 2019;
originally announced November 2019.
-
Torsional refrigeration by twisted, coiled, and supercoiled fibers
Authors:
Run Wang,
Shaoli Fang,
Yicheng Xiao,
Enlai Gao,
Nan Jiang,
Yaowang Li,
Linlin Mou,
Yanan Shen,
Wubin Zhao,
Sitong Li,
Alexandre F. Fonseca,
Douglas S. Galvão,
Mengmeng Chen,
Wenqian He,
Kaiqing Yu,
Hongbing Lu,
Xuemin Wang,
Dong Qian,
Ali E. Aliev,
Na Li,
Carter S. Haines,
Zhongsheng Liu,
Jiuke Mu,
Zhong Wang,
Shougen Yin
, et al. (5 additional authors not shown)
Abstract:
Higher efficiency, lower cost refrigeration is needed for both large and small scale cooling. Refrigerators using entropy changes during cycles of stretching or hydrostatically compression of a solid are possible alternatives to the vapor-compression fridges found in homes. We show that high cooling results from twist changes for twisted, coiled, or supercoiled fibers, including those of natural r…
▽ More
Higher efficiency, lower cost refrigeration is needed for both large and small scale cooling. Refrigerators using entropy changes during cycles of stretching or hydrostatically compression of a solid are possible alternatives to the vapor-compression fridges found in homes. We show that high cooling results from twist changes for twisted, coiled, or supercoiled fibers, including those of natural rubber, NiTi, and polyethylene fishing line. By using opposite chiralities of twist and coiling, supercoiled natural rubber fibers and coiled fishing line fibers result that cool when stretched. A demonstrated twist-based device for cooling flowing water provides a high cooling energy and device efficiency. Theory describes the axial and spring index dependencies of twist-enhanced cooling and its origin in a phase transformation for polyethylene fibers.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Dynamics of Graphene/Al Interfaces using COMB3 Potentials
Authors:
Difan Zhang,
Alexandre F. Fonseca,
Tao Liang,
Simon R. Phillpot,
Susan B. Sinnott
Abstract:
This work describes the development of a third-generation charge optimized many-body (COMB3) potential for Al-C and its application to the investigation of aluminum/graphene nanostructures. In particular, the new COMB3 potential was used to investigate the interactions of aluminum surfaces with pristine and defective graphene sheets. Classical molecular dynamics simulations were performed at tempe…
▽ More
This work describes the development of a third-generation charge optimized many-body (COMB3) potential for Al-C and its application to the investigation of aluminum/graphene nanostructures. In particular, the new COMB3 potential was used to investigate the interactions of aluminum surfaces with pristine and defective graphene sheets. Classical molecular dynamics simulations were performed at temperatures of 300-900K to investigate the structural evolution of these interfaces. The results indicate that although the interfaces between Al and graphene are mostly weakly bonded, aluminum carbide can form under the right conditions, including the presence of vacancy defects in graphene, undercoordinated Al in surface regions with sharp boundaries, and at high temperatures. COMB3 potentials were further used to examine a new method to transfer graphene between Al surfaces as well as between Al and Cu surfaces by controlling the angle of the graphene between the two surfaces. The findings indicate that by controlling the peeling angles it is possible to transfer graphene without any damage from the surface having greater graphene/surface adhesion to another surface with less adhesion.
△ Less
Submitted 30 September, 2019;
originally announced September 2019.
-
New zero Poisson's ratio models
Authors:
Vladimir Gaal,
Varlei Rodrigues,
Socrates O. Dantas,
Douglas S. Galvao,
Alexandre F. Fonseca
Abstract:
Most materials exhibit positive Poisson's ratio (PR) values but special structures can also present negative and, even rarer, zero (or close to zero) PR. Null PR structures have received much attention due to their unusual properties and potential applications in different fields, such as aeronautics and bio-engineering. Here, we present a new and simple near-zero PR 2D topological model based on…
▽ More
Most materials exhibit positive Poisson's ratio (PR) values but special structures can also present negative and, even rarer, zero (or close to zero) PR. Null PR structures have received much attention due to their unusual properties and potential applications in different fields, such as aeronautics and bio-engineering. Here, we present a new and simple near-zero PR 2D topological model based on a structural block composed of two smooth and rigid bars connected by a soft membrane or spring. It is not based on re-entrant or honeycomb-like configurations, which have been the basis of many null or quasi-null PR models. Our topological model was 3D printed and the experimentally obtained PR was$-0.003\,\pm 0.001\,$, which is one the closest to zero value ever reported. This topological model can be easily extended to 3D systems and with compression in any direction. The advantages and disadvantages of these models are also addressed.
△ Less
Submitted 14 September, 2019;
originally announced September 2019.
-
Energy barriers for collapsing large-diameter carbon nanotubes
Authors:
Rafael R. Del Grande,
Alexandre F. da Fonseca,
Rodrigo B. Capaz
Abstract:
Single-wall carbon nanotubes (SWNTs) are best known in their hollow cylindrical shapes, but the ground state of large-diameter tubes actually corresponds to a collapsed dumbbell-like structure, where the opposite sides of the nanotube wall are brought in contact and stabilized by van der Waals attraction. For those tubes, the cylindrical shape is metastable and it is interesting to investigate the…
▽ More
Single-wall carbon nanotubes (SWNTs) are best known in their hollow cylindrical shapes, but the ground state of large-diameter tubes actually corresponds to a collapsed dumbbell-like structure, where the opposite sides of the nanotube wall are brought in contact and stabilized by van der Waals attraction. For those tubes, the cylindrical shape is metastable and it is interesting to investigate the energy barrier for jum** from one configuration to another. We calculate the energy barrier for SWNT collapse by considering a transition pathway that consists of an initial local deformation that subsequently propagates itself along the SWNT axis. This leads to finite and physically meaningful energy barriers in the limit of infinite nanotubes. Yet, such barriers are surprisingly large (tens of eV) and therefore virtually unsurmountable, which essentially prevents the thermal collapse of a metastable cylindrical at any reasonable temperatures. Moreover, we show that collapse barriers increase counterintuitively with SWNT diameter. Finally, we demonstrate that, despite such huge barriers, SWNTs may collapse relatively easily under external radial forces and we shed light on recent experimental observations of collapsed and cylindrical SWNTs of various diameters.
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
The Structure of Graphene on Graphene/C60/Cu Interfaces: A Molecular Dynamics Study
Authors:
Alexandre F. Fonseca,
Sócrates O. Dantas,
Douglas S. Galvão,
Difan Zhang,
Susan B. Sinnott
Abstract:
Two experimental studies reported the spontaneous formation of amorphous and crystalline structures of C60 intercalated between graphene and a substrate. They observed interesting phenomena ranging from reaction between C60 molecules under graphene to graphene sagging between the molecules and control of strain in graphene. Motivated by these works, we performed fully atomistic reactive molecular…
▽ More
Two experimental studies reported the spontaneous formation of amorphous and crystalline structures of C60 intercalated between graphene and a substrate. They observed interesting phenomena ranging from reaction between C60 molecules under graphene to graphene sagging between the molecules and control of strain in graphene. Motivated by these works, we performed fully atomistic reactive molecular dynamics simulations to study the formation and thermal stability of graphene wrinkles as well as graphene attachment to and detachment from the substrate when graphene is laid over a previously distributed array of C60 molecules on a copper substrate at different values of temperature. As graphene compresses the C60 molecules against the substrate, and graphene attachment to the substrate between C60s ("C60s" stands for plural of C60) depends on the height of graphene wrinkles, configurations with both frozen and non-frozen C60s structures were investigated in order to verify the experimental result of stable sagged graphene when the distance between C60s is about 4 nm and height of graphene wrinkles is about 0.8 nm. Below the distance of 4 nm between C60s, graphene becomes locally suspended and less strained. We show that this happens when C60s are allowed to deform under the compressive action of graphene. If we keep the C60s frozen, spontaneous "blanketing" of graphene happens only when the distance between them are equal or above 7 nm. Both above results for the existence of stable sagged graphene for C60 distances of 4 or 7 nm are shown to agree with a mechanical model relating the rigidity of graphene to the energy of graphene-substrate adhesion. In particular, this study might help the development of 2D confined nanoreactors that are considered in literature to be the next advanced step on chemical reactions.
△ Less
Submitted 22 April, 2019;
originally announced April 2019.
-
Representing pictures with emotions
Authors:
António Filipe Fonseca
Abstract:
Modern research in content-based image retrieval systems (CIBR) has become progressively more focused on the richness of human semantics. Several approaches may be used to reduced the 'semantic gap' between the high-level human experience and the low level visual features of pictures. Object ontology, among others, is one of the methods. In this paper we investigate the use of a codified emotion o…
▽ More
Modern research in content-based image retrieval systems (CIBR) has become progressively more focused on the richness of human semantics. Several approaches may be used to reduced the 'semantic gap' between the high-level human experience and the low level visual features of pictures. Object ontology, among others, is one of the methods. In this paper we investigate the use of a codified emotion ontology over global color features of images to annotate the images at a high semantic level. In order to speed up the annotation process the images are sampled so that each digital image is represented by a random subset of its content. We test within controlled conditions how this random subset may represent the adequate high level emotional concept presented in the image. We monitor this information reducing process with entropy measures, showing that controlled random sampling can capture with significant relevance high level concepts for picture representation.
△ Less
Submitted 7 December, 2018; v1 submitted 6 December, 2018;
originally announced December 2018.
-
Self-tearing and self-peeling of folded graphene nanoribbons
Authors:
Alexandre F. Fonseca,
Douglas S. Galvao
Abstract:
A recent experimental study showed that an induced folded flap of graphene can spontaneously drive itself its tearing and peeling off a substrate, thus producing long, micrometer sized, regular trapezoidal-shaped folded graphene nanoribbons. As long as the size of the graphene flaps is above a threshold value, the 'tug of war' between the forces of adhesion of graphene-graphene and graphene-substr…
▽ More
A recent experimental study showed that an induced folded flap of graphene can spontaneously drive itself its tearing and peeling off a substrate, thus producing long, micrometer sized, regular trapezoidal-shaped folded graphene nanoribbons. As long as the size of the graphene flaps is above a threshold value, the 'tug of war' between the forces of adhesion of graphene-graphene and graphene-substrate, flexural strain of folded region and carbon-carbon (C-C) covalent bonds favor the self-tearing and self-peeling off process. As the detailed information regarding the atomic scale mechanism involved in the process remains not fully understood, we carried out atomistic reactive molecular dynamics simulations to address some features of the process. We show that large thermal fluctuations can prevent the process by increasing the probability of chemical reactions between carbon dangling bonds of adjacent graphene layers. The effects of the strength of attraction between graphene and the substrate on the ribbon growth velocities at the early stages of the phenomenon were also investigated. Structures with initial armchair crack-edges were observed to form more uniform cuts than those having initial zigzag ones. Our results are of importance to help set up new experiments on this phenomenon, especially with samples with nanoscale sized cuts.
△ Less
Submitted 27 August, 2018;
originally announced August 2018.
-
Self-Driven Graphene Tearing and Peeling: A Fully Atomistic Molecular Dynamics Investigation
Authors:
Alexandre F. Fonseca,
Douglas S. Galvao
Abstract:
In spite of years of intense research, graphene continues to produce surprising results. Recently, it was experimentally observed that under certain conditions graphene can self-drive its tearing and peeling from substrates. This process can generate long, micrometer sized, folded nanoribbons without the action of any external forces. Also, during this cracking-like propagation process, the width…
▽ More
In spite of years of intense research, graphene continues to produce surprising results. Recently, it was experimentally observed that under certain conditions graphene can self-drive its tearing and peeling from substrates. This process can generate long, micrometer sized, folded nanoribbons without the action of any external forces. Also, during this cracking-like propagation process, the width of the graphene folded ribbon continuously decreases and the process only stops when the width reaches about few hundreds nanometers in size. It is believed that interplay between the strain energy of folded regions, breaking of carbon-carbon covalent bonds, and adhesion of graphene-graphene and graphene-substrate are the most fundamental features of this process, although the detailed mechanisms at atomic scale remain unclear. In order to gain further insights on these processes we carried out fully atomistic reactive molecular dynamics simulations using the AIREBO potential as available in the LAMMPS computational package. Although the reported tearing/peeling experimental observations were only to micrometer sized structures, our results showed that they could also occur at nanometer scale. Our preliminary results suggest that the graphene tearing/peeling process originates from thermal energy fluctuations that results in broken bonds, followed by strain release that creates a local elastic wave that can either reinforce the process, similar to a whip cracking propagation, or undermine it by producing carbon dangling bonds that evolve to the formation of bonds between the two layers of graphene. As the process continues in time and the folded graphene decreases in width, the carbon-carbon bonds at the ribbon edge and interlayer bonds get less stressed, thermal fluctuations become unable to break them and the process stops.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Mechanical Properties of Phagraphene Membranes: A Fully Atomistic Molecular Dynamics Investigation
Authors:
Jose M. de Sousa,
Acrisio L. Aguiar,
Eduardo C. Girao,
Alexandre F. Fonseca,
Antonio G. Sousa Filho,
Douglas S. Galvao
Abstract:
Recently, a new 2D carbon allotrope structure, named phagraphene (PG), was proposed. PG has a densely array of penta-hexa-hepta-graphene carbon rings. PG was shown to present low and anisotropic thermal conductivity and it is believed that this anisotropy should be also reflected in its mechanical properties. Although PG mechanical properties have been investigated, a detailed and comprehensive st…
▽ More
Recently, a new 2D carbon allotrope structure, named phagraphene (PG), was proposed. PG has a densely array of penta-hexa-hepta-graphene carbon rings. PG was shown to present low and anisotropic thermal conductivity and it is believed that this anisotropy should be also reflected in its mechanical properties. Although PG mechanical properties have been investigated, a detailed and comprehensive study is still lacking. In the present work we have carried out fully atomistic reactive molecular dynamics simulations using the ReaxFF force field, to investigate the mechanical properties and fracture patterns of PG membranes. The Young's modulus values of the PG membranes were estimated from the stress-strain curves. Our results show that these curves present three distinct regimes: one regime where ripples dominate the structure and mechanical properties of the PG membranes; an elastic regime where the membranes exhibit fully planar configurations; and finally a plastic regime where permanent deformations happened to the PG membrane up to the mechanical failure or fracture.
△ Less
Submitted 12 January, 2018;
originally announced January 2018.
-
Mechanical Properties of Pentagraphene-based Nanotubes: A Molecular Dynamics Study
Authors:
Jose M. de Sousa,
Acrisio L. Aguiar,
Eduardo C. Girão,
Alexandre F. Fonseca,
Antonio G. Sousa Filho,
Douglas S. Galvao
Abstract:
The study of the mechanical properties of nanostructured systems has gained importance in theoretical and experimental research in recent years. Carbon nanotubes (CNTs) are one of the strongest nanomaterials found in nature, with Young's Modulus (YM) in the order 1.25 TPa. One interesting question is about the possibility of generating new nanostructures with 1D symmetry and with similar and/or su…
▽ More
The study of the mechanical properties of nanostructured systems has gained importance in theoretical and experimental research in recent years. Carbon nanotubes (CNTs) are one of the strongest nanomaterials found in nature, with Young's Modulus (YM) in the order 1.25 TPa. One interesting question is about the possibility of generating new nanostructures with 1D symmetry and with similar and/or superior CNT properties. In this work, we present a study on the dynamical, structural, mechanical properties, fracture patterns and YM values for one class of these structures, the so-called pentagraphene nanotubes (PGNTs). These tubes are formed rolling up pentagraphene membranes (which are quasi-bidimensional structures formed by densely compacted pentagons of carbon atoms in sp3 and sp2 hybridized states) in the same form that CNTs are formed from rolling up graphene membranes. We carried out fully atomistic molecular dynamics simulations using the ReaxFF force field. We have considered zigzag-like and armchair-like PGNTs of different diameters. Our results show that PGNTs present YM ~ 800 GPa with distinct elastic behavior in relation to CNTs, mainly associated with mechanical failure, chirality dependent fracture patterns and extensive structural reconstructions.
△ Less
Submitted 12 January, 2018;
originally announced January 2018.
-
Synthesis, characterization and computational simulation of graphene nanoplatelets stabilized in poly(styrene sulfonate) sodium salt
Authors:
Celina M. Miyazaki,
Marco A. E. Maria,
Daiane Damasceno Borges,
Cristiano F. Woellner,
Gustavo Brunetto,
Alexandre F. Fonseca,
Carlos J. L. Constantino,
Marcelo A. Pereira-da-Silva,
Abner de Siervo,
Douglas S. Galvao,
Antonio Riul Jr
Abstract:
The production of large area interfaces and the use of scalable methods to build-up designed nanostructures generating advanced functional properties are of high interest for many materials science applications. Nevertheless, large area coverage remains a major problem for pristine graphene and here we present a hybrid, composite graphene-like material soluble in water, which can be exploited in m…
▽ More
The production of large area interfaces and the use of scalable methods to build-up designed nanostructures generating advanced functional properties are of high interest for many materials science applications. Nevertheless, large area coverage remains a major problem for pristine graphene and here we present a hybrid, composite graphene-like material soluble in water, which can be exploited in many areas, such as energy storage, electrodes fabrication, selective membranes and biosensing. Graphene oxide (GO) was produced by the traditional Hummers method being further reduced in the presence of poly(styrene sulfonate) sodium salt (PSS), thus creating stable reduced graphene oxide (rGO) nanoplateles wrapped by PSS (GPSS). Molecular dynamics simulations were carried out of further clarify the interactions between PSS molecules and rGO nanoplatelets, with calculations supported by FTIR analysis. The intermolecular forces between rGO nanoplatelets and PSS lead to the formation of a hybrid material (GPSS) stabilized by van der Waals forces, allowing the fabrication of high quality layer-by-layer (LbL) films with polyalillamine hydrochloride (PAH). Raman and electrical characterizations corroborated the successful modifications in the electronic structures from GO to GPSS after the chemical treatment, resulting in (PAH/GPSS) LbL films four orders of magnitude more conductive than (PAH/GO).
△ Less
Submitted 30 May, 2017;
originally announced May 2017.
-
Anisotropic Elastic Modulus, High Poisson's ratio and Negative Thermal Expansion of Graphynes and Graphdiynes
Authors:
Sergio A. Hernandez,
Alexandre F. Fonseca
Abstract:
Graphyne (GY) and graphdiyne (GDY) are two-dimensional one-atom-thick carbon allotropes highly considered to substitute graphene in electronic applications because of the prediction of non null band-gap. There are seven types of GY structures not yet fully investigated in literature. In this work, by means of classical molecular dynamics simulations, the Young's modulus, Poisson's ratio and linear…
▽ More
Graphyne (GY) and graphdiyne (GDY) are two-dimensional one-atom-thick carbon allotropes highly considered to substitute graphene in electronic applications because of the prediction of non null band-gap. There are seven types of GY structures not yet fully investigated in literature. In this work, by means of classical molecular dynamics simulations, the Young's modulus, Poisson's ratio and linear thermal expansion coefficient (TEC) of all originally proposed seven types of GYs and corresponding GDYs are calculated. The dependence of these properties with the density of the structure is investigated for the first time. Quadratic increasing of the TEC of GY and GDY structures with density was found. The elastic modulus of GYs and GDYs were shown to be more sensitive to their density than general porous materials. In particular, non-symmetric structures are much softer along the armchair direction than along zigzag direction, implying that the elasticity along armchair direction of GY and GDY structures are similar to that of porous gels materials. Values larger than unity were found for the Poisson's ratio of some non-symmetric GYs and GDYs. A simple honeycomb mechanical model is shown to capture the observed values of Poisson's ratio of GYs and GDYs.
△ Less
Submitted 3 April, 2017;
originally announced April 2017.
-
Mechanical Properties and Fracture Patterns of Pentagraphene Membranes
Authors:
J. M. de Sousa,
A. L. Aguiar,
E. C. Girao,
Alexandre F. Fonseca,
A. G. Souza Filho,
Douglas S. Galvao
Abstract:
Recently, a new two-dimensional carbon allotrope called pentagraphene (PG) was proposed. PG exhibits mechanical and electronic interesting properties, including typical band gap values of semiconducting materials. PG has a Cairo-tiling-like 2D lattice of non coplanar pentagons and its mechanical properties have not been yet fully investigated. In this work, we combined density functional theory (D…
▽ More
Recently, a new two-dimensional carbon allotrope called pentagraphene (PG) was proposed. PG exhibits mechanical and electronic interesting properties, including typical band gap values of semiconducting materials. PG has a Cairo-tiling-like 2D lattice of non coplanar pentagons and its mechanical properties have not been yet fully investigated. In this work, we combined density functional theory (DFT) calculations and reactive molecular dynamics (MD) simulations to investigate the mechanical properties and fracture patterns of PG membranes under tensile strain. We show that PG membranes can hold up to 20% of strain and that fracture occurs only after substantial dynamical bond breaking and the formation of 7, 8 and 11 carbon rings and carbon chains. The stress-strain behavior was observed to follow two regimes, one exhibiting linear elasticity followed by a plastic one, involving carbon atom re-hybridization with the formation of carbon rings and chains. Our results also show that mechanically induced structural transitions from PG to graphene is unlikely to occur, in contrast to what was previously speculated in the literature.
△ Less
Submitted 10 March, 2017;
originally announced March 2017.
-
Violation of the Universal Behavior of Membranes Inside Cylindrical Tubes at Nanoscale
Authors:
E. Perim,
A. F. Fonseca,
N. M. Pugno,
D. S. Galvao
Abstract:
Recently, it was proposed based on classical elasticity theory and experiments at macroscale, that the conformations of sheets inside cylindrical tubes present a universal behavior. A natural question is whether this behavior still holds at nanoscale. Based on molecular dynamics simulations and analytical modeling for graphene and boron nitride membranes confined inside carbon nanotubes, we show t…
▽ More
Recently, it was proposed based on classical elasticity theory and experiments at macroscale, that the conformations of sheets inside cylindrical tubes present a universal behavior. A natural question is whether this behavior still holds at nanoscale. Based on molecular dynamics simulations and analytical modeling for graphene and boron nitride membranes confined inside carbon nanotubes, we show that the class of universality observed at macroscale is violated at nanoscale. The precise origins of these discrepancies is addressed and proven to be related to both surface and atomistic effects.
△ Less
Submitted 27 February, 2014;
originally announced February 2014.
-
Isotope Effect on the Thermal Conductivity of Graphene
Authors:
Hengji Zhang,
Geunsik Lee,
Alexandre F. Fonseca,
Tammie L. Borders,
Kyeongjae Cho
Abstract:
The thermal conductivity (TC) of isolated graphene with different concentrations of isotopes (C13) is studied with equilibrium molecular dynamics method at 300K. In the limit of pure C12 or C13 graphene, TC of graphene in zigzag and armchair directions are ~630 W/mK and ~1000W/mK, respectively. We find that the TC of graphene can be maximally reduced by ~80%, in both armchair and zigzag directions…
▽ More
The thermal conductivity (TC) of isolated graphene with different concentrations of isotopes (C13) is studied with equilibrium molecular dynamics method at 300K. In the limit of pure C12 or C13 graphene, TC of graphene in zigzag and armchair directions are ~630 W/mK and ~1000W/mK, respectively. We find that the TC of graphene can be maximally reduced by ~80%, in both armchair and zigzag directions, when a random distribution of C12 and C13 is assumed at different do** concentrations. Therefore, our simulation results suggest an effective way to tune the TC of graphene without changing its atomic and electronic structure, thus yielding a promising application for nanoelectronics and thermoelectricity of graphene based nano-device.
△ Less
Submitted 8 July, 2010;
originally announced July 2010.
-
Entanglement and the nonlinear elastic behavior of forests of coiled carbon nanotubes
Authors:
Vitor R. Coluci,
Alexandre F. Fonseca,
Douglas S. Galvao,
Chiara Daraio
Abstract:
Helical or coiled nanostructures have been object of intense experimental and theoretical studies due to their special electronic and mechanical properties. Recently, it was experimentally reported that the dynamical response of foamlike forest of coiled carbon nanotubes under mechanical impact exhibits a nonlinear, non-Hertzian behavior, with no trace of plastic deformation. The physical origin…
▽ More
Helical or coiled nanostructures have been object of intense experimental and theoretical studies due to their special electronic and mechanical properties. Recently, it was experimentally reported that the dynamical response of foamlike forest of coiled carbon nanotubes under mechanical impact exhibits a nonlinear, non-Hertzian behavior, with no trace of plastic deformation. The physical origin of this unusual behavior is not yet fully understood. In this work, based on analytical models, we show that the entanglement among neighboring coils in the superior part of the forest surface must be taken into account for a full description of the strongly nonlinear behavior of the impact response of a drop-ball onto a forest of coiled carbon nanotubes.
△ Less
Submitted 28 August, 2007;
originally announced August 2007.
-
Circular and helical equilibrium solutions of inhomogeneous rods
Authors:
Alexandre F. da Fonseca,
C. P. Malta
Abstract:
Real filaments are not perfectly homogeneous. Most of them have various materials composition and shapes making their stiffnesses not constant along the arclength. We investigate the existence of circular and helical equilibrium solutions of an intrinsically straight rod with varying bending and twisting stiffnesses, within the framework of the Kirchhoff model. The planar ring equilibrium soluti…
▽ More
Real filaments are not perfectly homogeneous. Most of them have various materials composition and shapes making their stiffnesses not constant along the arclength. We investigate the existence of circular and helical equilibrium solutions of an intrinsically straight rod with varying bending and twisting stiffnesses, within the framework of the Kirchhoff model. The planar ring equilibrium solution only exists for a rod with a given form of variation of the bending stiffness. We show that the well known circular helix is not an equilibrium solution of the static Kirchhoff equations for a rod with non constant bending stiffness. Our results may provide an explanation for the variation of the curvature seen in small closed DNAs immersed in a solution containing Zn^{2+}, and in the DNA wrapped around a nucleosome.
△ Less
Submitted 13 July, 2006;
originally announced July 2006.
-
Mechanical properties of amorphous nanosprings
Authors:
Alexandre F. da Fonseca,
C. P. Malta,
D. S. Galvao
Abstract:
Helical amorphous nanosprings have attracted particular interest due to their special mechanical properties. In this work we present a simple model, within the framework of the Kirchhoff rod model, for investigating the structural properties of nanosprings having asymmetric cross section. We have derived expressions that can be used to obtain the Young's modulus and Poisson's ratio of the nanosp…
▽ More
Helical amorphous nanosprings have attracted particular interest due to their special mechanical properties. In this work we present a simple model, within the framework of the Kirchhoff rod model, for investigating the structural properties of nanosprings having asymmetric cross section. We have derived expressions that can be used to obtain the Young's modulus and Poisson's ratio of the nanospring material composite. We also address the importance of the presence of a catalyst in the growth process of amorphous nanosprings in terms of the stability of helical rods.
△ Less
Submitted 26 October, 2006; v1 submitted 11 July, 2006;
originally announced July 2006.
-
Lancret helices
Authors:
Alexandre F. da Fonseca,
C. P. Malta
Abstract:
Helical configurations of inhomogeneous symmetric rods with non-constant bending and twisting stiffness are studied within the framework of the Kirchhoff rod model. From the static Kirchhoff equations, we obtain a set of differential equations for the curvature and torsion of the centerline of the rod and the Lancret's theorem is used to find helical solutions. We obtain a free standing helical…
▽ More
Helical configurations of inhomogeneous symmetric rods with non-constant bending and twisting stiffness are studied within the framework of the Kirchhoff rod model. From the static Kirchhoff equations, we obtain a set of differential equations for the curvature and torsion of the centerline of the rod and the Lancret's theorem is used to find helical solutions. We obtain a free standing helical solution for an inhomogeneous rod whose curvature and torsion depend on the form of variation of the bending coefficient along the rod. These results are obtained for inhomogeneous rods without intrinsic curvature, and for a particular case of intrinsic curvature.
△ Less
Submitted 13 July, 2005;
originally announced July 2005.
-
Is it possible to grow amorphous normal nanosprings ?
Authors:
Alexandre F. Fonseca,
C. P. Malta,
D. S. Galvao
Abstract:
Nanosprings have been object of intense investigations in recent years. They can be classified as normal or binormal depending on the geometry of their cross-section. Normal amorphous nanosprings have not been observed experimentally up to now, and only recently the synthesis of a crystalline ZnO normal nanohelix has been reported. We discuss the shape of the catalyst in terms of the cross-secti…
▽ More
Nanosprings have been object of intense investigations in recent years. They can be classified as normal or binormal depending on the geometry of their cross-section. Normal amorphous nanosprings have not been observed experimentally up to now, and only recently the synthesis of a crystalline ZnO normal nanohelix has been reported. We discuss the shape of the catalyst in terms of the cross-sectional shape of the nanospring, and show that, within the vapor-liquid-solid model, the growth of amorphous normal nanospring is not energetically favoured.
△ Less
Submitted 5 October, 2007; v1 submitted 16 July, 2005;
originally announced July 2005.
-
Elastic Properties of Nanowires
Authors:
Alexandre F. da Fonseca,
C. P. Malta,
D. S. Galvão
Abstract:
We present a model to study Young's modulus and Poisson's ratio of the composite material of amorphous nanowires. It is an extension of the model derived by two of us [Da Fonseca and Galvao, Phys. Rev. Lett. 92, 175502 (2004)] to study the elastic properties of amorphous nanosprings. The model is based on twisting and tensioning a straight nanowire and we propose an experimental setup to obtain…
▽ More
We present a model to study Young's modulus and Poisson's ratio of the composite material of amorphous nanowires. It is an extension of the model derived by two of us [Da Fonseca and Galvao, Phys. Rev. Lett. 92, 175502 (2004)] to study the elastic properties of amorphous nanosprings. The model is based on twisting and tensioning a straight nanowire and we propose an experimental setup to obtain the elastic parameters of the nanowire. We used the Kirchhoff rod model to obtain the expressions for the elastic constants of the nanowire.
△ Less
Submitted 19 May, 2006; v1 submitted 13 July, 2005;
originally announced July 2005.
-
Kirchhoff rods with nonhomogeneous cross section
Authors:
Alexandre F. da Fonseca,
Coraci P. Malta
Abstract:
The Kirchhoff's theory for thin, inextensible, elastic rods with nonhomogeneous cross section is studied. The Young's and shear moduli of the rod are considered to vary radially, and it is shown that an analytical solution for the constitutive relations can be obtained for circular cross section and constant Poisson's ratio. We comment on possible applications of our results.
The Kirchhoff's theory for thin, inextensible, elastic rods with nonhomogeneous cross section is studied. The Young's and shear moduli of the rod are considered to vary radially, and it is shown that an analytical solution for the constitutive relations can be obtained for circular cross section and constant Poisson's ratio. We comment on possible applications of our results.
△ Less
Submitted 7 May, 2004;
originally announced May 2004.
-
Helical filaments with varying cross section radius
Authors:
Alexandre F. da Fonseca,
C. P. Malta
Abstract:
The tridimensional configuration and the twist density of helical rods with varying cross section radius are studied within the framework of the Kirchhoff rod model. It is shown that the twist density increases when the cross section radius decreases. Some tridimensional configurations of helix-like rods are displayed showing the effects of the nonhomogeneity considered here. Since the helix-lik…
▽ More
The tridimensional configuration and the twist density of helical rods with varying cross section radius are studied within the framework of the Kirchhoff rod model. It is shown that the twist density increases when the cross section radius decreases. Some tridimensional configurations of helix-like rods are displayed showing the effects of the nonhomogeneity considered here. Since the helix-like solutions of the nonhomogeneous rods do not present constant curvature and torsion a set of differential equations for these quantities is presented. We discuss the results and possible consequences.
△ Less
Submitted 21 October, 2003;
originally announced October 2003.
-
Resonant helical deformations in nonhomogeneous Kirchhoff filaments
Authors:
Alexandre F. da Fonseca,
C. P. Malta,
Marcus A. M. de Aguiar
Abstract:
We study the three-dimensional static configurations of nonhomogeneous Kirchhoff filaments with periodically varying Young's modulus. This type of variation may occur in long tandemly repeated sequences of DNA. We analyse the effects of the Young's modulus frequence and amplitude of oscillation in the stroboscopic maps, and in the regular (non chaotic) spatial configurations of the filaments. Ou…
▽ More
We study the three-dimensional static configurations of nonhomogeneous Kirchhoff filaments with periodically varying Young's modulus. This type of variation may occur in long tandemly repeated sequences of DNA. We analyse the effects of the Young's modulus frequence and amplitude of oscillation in the stroboscopic maps, and in the regular (non chaotic) spatial configurations of the filaments. Our analysis shows that the tridimensional conformations of long filaments may depend critically on the Young's modulus frequence in case of resonance with other natural frequencies of the filament. As expected, far from resonance the shape of the solutions remain very close to that of the homogeneous case. In the case of biomolecules, it is well known that various other elements, besides sequence-dependent effects, combine to determine their conformation, like self-contact, salt concentration, thermal fluctuations, anisotropy and interaction with proteins. Our results show that sequence-dependent effects alone may have a significant influence on the shape of these molecules, including DNA. This could, therefore, be a possible mechanical function of the ``junk'' sequences.
△ Less
Submitted 30 April, 2004; v1 submitted 29 October, 2002;
originally announced October 2002.
-
Solving the boundary value problem for finite Kirchhoff rods
Authors:
Alexandre F. da Fonseca,
Marcus A. M. de Aguiar,
.
Abstract:
The Kirchhoff model describes the statics and dynamics of thin rods within the approximations of the linear elasticity theory. In this paper we develop a method, based on a shooting technique, to find equilibrium configurations of finite rods subjected to boundary conditions and given load parameters. The method consists in making a series of small changes on a {\it trial} solution satisfying th…
▽ More
The Kirchhoff model describes the statics and dynamics of thin rods within the approximations of the linear elasticity theory. In this paper we develop a method, based on a shooting technique, to find equilibrium configurations of finite rods subjected to boundary conditions and given load parameters. The method consists in making a series of small changes on a {\it trial} solution satisfying the Kirchhoff equations but not necessarily the boundary conditions. By linearizing the differential equations around the trial solution we are able to push its end point to the desired position, step by step. The method is also useful to obtain configurations of rods with fixed end points but different mechanical parameters, such as tension, components of the moment or inhomogeneities.
△ Less
Submitted 13 September, 2002;
originally announced September 2002.