-
Differences in chemical evolution between isolated and embedded prestellar cores
Authors:
F. D. Priestley,
A. P. Whitworth,
E. Fogerty
Abstract:
Models of prestellar cores often assume that the cores are isolated from their environment - material outside the core boundary plays no role in the subsequent evolution. This is unlikely to be the case in reality, where cores are located within hierarchically substructured molecular clouds. We investigate the dynamical and chemical evolution of prestellar cores, modelled as Bonnor-Ebert spheres,…
▽ More
Models of prestellar cores often assume that the cores are isolated from their environment - material outside the core boundary plays no role in the subsequent evolution. This is unlikely to be the case in reality, where cores are located within hierarchically substructured molecular clouds. We investigate the dynamical and chemical evolution of prestellar cores, modelled as Bonnor-Ebert spheres, and show that the density of the ambient medium has a large impact on the resulting chemical properties of the cores. Models embedded in high-density, low-temperature surroundings have greatly enhanced abundances of several molecules, such as CO and CS, compared to models with more diffuse surroundings, corresponding to relatively isolated cores. The predicted intensities and profile shapes of molecular lines are also affected. The density of the ambient medium has a stronger effect on the chemical evolution than whether the cores are initially in or out of equilibrium. This suggests that the impact of environment cannot be neglected when modelling chemistry in prestellar cores; the results of these models are highly sensitive to the assumptions made about the core surroundings.
△ Less
Submitted 22 November, 2022;
originally announced November 2022.
-
Dust destruction by the reverse shock in the clumpy supernova remnant Cassiopeia A based on hydrodynamic simulations
Authors:
Florian Kirchschlager,
Franziska D. Schmidt,
M. J. Barlow,
Erica L. Fogerty,
Antonia Bevan,
Felix D. Priestley
Abstract:
Observations of the ejecta of core-collapse supernovae have shown that dust grains form in over-dense gas clumps in the expanding ejecta. The clumps are later subject to the passage of the reverse shock and a significant amount of the newly formed dust material can be destroyed due to the high temperatures and high velocities in the post-shock gas. To determine dust survival rates, we have perform…
▽ More
Observations of the ejecta of core-collapse supernovae have shown that dust grains form in over-dense gas clumps in the expanding ejecta. The clumps are later subject to the passage of the reverse shock and a significant amount of the newly formed dust material can be destroyed due to the high temperatures and high velocities in the post-shock gas. To determine dust survival rates, we have performed a set of hydrodynamic simulations using the grid-based code AstroBEAR in order to model a shock wave interacting with a clump of gas and dust. Afterwards, dust motions and dust destruction rates are computed using our newly developed external, post-processing code Paperboats, which includes gas and plasma drag, grain charging, kinematic and thermal sputtering as well as grain-grain collisions. We have determined dust survival rates for the oxygen-rich supernova remnant Cassiopeia A as a function of initial grain sizes, dust materials and clump gas densities.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
Dust survival rates in clumps passing through the Cas A reverse shock I: results for a range of clump densities
Authors:
Florian Kirchschlager,
Franziska D. Schmidt,
M. J. Barlow,
Erica L. Fogerty,
Antonia Bevan,
Felix D. Priestley
Abstract:
The reverse shock in the ejecta of core-collapse supernovae is potentially able to destroy newly formed dust material. In order to determine dust survival rates, we have performed a set of hydrodynamic simulations using the grid-based code AstroBEAR in order to model a shock wave interacting with clumpy supernova ejecta. Dust motions and destruction rates were computed using our newly developed ex…
▽ More
The reverse shock in the ejecta of core-collapse supernovae is potentially able to destroy newly formed dust material. In order to determine dust survival rates, we have performed a set of hydrodynamic simulations using the grid-based code AstroBEAR in order to model a shock wave interacting with clumpy supernova ejecta. Dust motions and destruction rates were computed using our newly developed external, post-processing code Paperboats, which includes gas drag, grain charging, sputtering and grain-grain collisions. We have determined dust destruction rates for the oxygen-rich supernova remnant Cassiopeia A as a function of initial grain sizes and clump gas density. We found that up to 30 % of the carbon dust mass is able to survive the passage of the reverse shock if the initial grain size distribution is narrow with radii around ~10 - 50 nm for high gas densities, or with radii around ~0.5 - 1.5 $μ$m for low and medium gas densities. Silicate grains with initial radii around 10 - 30 nm show survival rates of up to 40 % for medium and high density contrasts, while silicate material with micron sized distributions is mostly destroyed. For both materials, the surviving dust mass is rearranged into a new size distribution that can be approximated by two components: a power-law distribution of small grains and a log-normal distribution of grains having the same size range as the initial distribution. Our results show that grain-grain collisions and sputtering are synergistic and that grain-grain collisions can play a crucial role in determining the surviving dust budget in supernova remnants.
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
Hydrodynamic and Magnetohydrodynamic Simulations of Wire Turbulence
Authors:
Erica Fogerty,
Baowei Liu,
Adam Frank,
Jonathan Carroll-Nellenback,
Sergey Lebedev
Abstract:
We report on simulations of laboratory experiments in which magnetized supersonic flows are driven through a wire mesh. The goal of the study was to investigate the ability of such a configuration to generate supersonic, MHD turbulence. We first report on the morphological structures that develop in both magnetized and non-magnetized cases. We then analyze the flow using a variety of statistical m…
▽ More
We report on simulations of laboratory experiments in which magnetized supersonic flows are driven through a wire mesh. The goal of the study was to investigate the ability of such a configuration to generate supersonic, MHD turbulence. We first report on the morphological structures that develop in both magnetized and non-magnetized cases. We then analyze the flow using a variety of statistical measures, including power spectra and probability distribution functions of the density. Using these results we estimate the sonic mach number in the flows downstream of the wire mesh. We find the initially hypersonic (M=20) planar shock through the wire mesh does lead to downstream turbulent conditions. However, in both magnetized and non-magnetized cases, the resultant turbulence was marginally supersonic to transonic (M~1), and highly anisotropic in structure.
△ Less
Submitted 10 July, 2019; v1 submitted 12 February, 2019;
originally announced February 2019.
-
Reorienting MHD Colliding Flows: A Shock Physics Mechanism for Generating Filaments Normal to Magnetic Fields
Authors:
Erica L. Fogerty,
Jonathan Carroll-Nellenback,
Adam Frank,
Fabian Heitsch,
Andy Pon
Abstract:
We present numerical simulations of reorienting oblique shocks that form in the collision layer between magnetized colliding flows. Reorientation aligns parsec-scale post-shock filaments normal to the background magnetic field. We find that reorientation begins with pressure gradients between the collision region and the ambient medium. This drives a lateral expansion of post-shock gas, which reor…
▽ More
We present numerical simulations of reorienting oblique shocks that form in the collision layer between magnetized colliding flows. Reorientation aligns parsec-scale post-shock filaments normal to the background magnetic field. We find that reorientation begins with pressure gradients between the collision region and the ambient medium. This drives a lateral expansion of post-shock gas, which reorients the growing filament from the outside-in (i.e. from the flow-ambient boundary, toward the colliding flows axis). The final structures of our simulations resemble polarization observations of filaments in Taurus and Serpens South, as well as the integral-shaped filament in Orion A. Given the ubiquity of colliding flows in the interstellar medium, shock reorientation may be relevant to the formation of filaments normal to magnetic fields.
△ Less
Submitted 7 June, 2017; v1 submitted 9 September, 2016;
originally announced September 2016.
-
Molecular cloud formation in high-shear, magnetized colliding flows
Authors:
Erica Fogerty,
Adam Frank,
Fabian Heitsch,
Jonathan Carroll-Nellenback,
Christina Haig,
Marissa Adams
Abstract:
The colliding flows (CF) model is a well-supported mechanism for generating molecular clouds. However, to-date most CF simulations have focused on the formation of clouds in the normal-shock layer between head-on colliding flows. We performed simulations of magnetized colliding flows that instead meet at an oblique-shock layer. Oblique shocks generate shear in the post-shock environment, and this…
▽ More
The colliding flows (CF) model is a well-supported mechanism for generating molecular clouds. However, to-date most CF simulations have focused on the formation of clouds in the normal-shock layer between head-on colliding flows. We performed simulations of magnetized colliding flows that instead meet at an oblique-shock layer. Oblique shocks generate shear in the post-shock environment, and this shear creates inhospitable environments for star formation. As the degree of shear increases (i.e. the obliquity of the shock increases), we find that it takes longer for sink particles to form, they form in lower numbers, and they tend to be less massive. With regard to magnetic fields, we find that even a weak field stalls gravitational collapse within forming clouds. Additionally, an initially oblique collision interface tends to reorient over time in the presence of a magnetic field, so that it becomes normal to the oncoming flows. This was demonstrated by our most oblique shock interface, which became fully normal by the end of the simulation.
△ Less
Submitted 30 May, 2016; v1 submitted 1 February, 2016;
originally announced February 2016.