-
Fiber-taper collected emission from NV centers in high-$Q/V$ diamond microdisks
Authors:
Tamiko Masuda,
J. P. E. Hadden,
David P. Lake,
Matthew Mitchell,
Sigurd Flågan,
Paul E. Barclay
Abstract:
Fiber-coupled microdisks are a promising platform for enhancing the spontaneous emission from color centers in diamond. The measured cavity-enhanced emission from the microdisk is governed by the effective volume ($V$) of each cavity mode, the cavity quality factor ($Q$), and the coupling between the microdisk and the fiber. Here we observe photoluminescence from an ensemble of nitrogen-vacancy ce…
▽ More
Fiber-coupled microdisks are a promising platform for enhancing the spontaneous emission from color centers in diamond. The measured cavity-enhanced emission from the microdisk is governed by the effective volume ($V$) of each cavity mode, the cavity quality factor ($Q$), and the coupling between the microdisk and the fiber. Here we observe photoluminescence from an ensemble of nitrogen-vacancy centers into high $Q/V$ microdisk modes, which when combined with coherent spectroscopy of the microdisk modes, allows us to elucidate the relative contributions of these factors. The broad emission spectrum acts as an internal light source facilitating mode identification over several cavity free spectral ranges. Analysis of the fiber-taper collected microdisk emission reveals spectral filtering both by the cavity and the fiber-taper, the latter of which we find preferentially couples to higher-order microdisk modes. Coherent mode spectroscopy is used to measure $Q\sim 1\times10^{5}$ -- the highest reported values for diamond microcavities operating at visible wavelengths. With realistic optimization of the microdisk dimensions, we predict that Purcell factors of $\sim 50$ are within reach.
△ Less
Submitted 6 October, 2023;
originally announced October 2023.
-
Diamond Integrated Quantum Photonics: A Review
Authors:
Prasoon K. Shandilya,
Sigurd Flågan,
Natalia C. Carvalho,
Elham Zohari,
Vinaya K. Kavatamane,
Joseph E. Losby,
Paul E. Barclay
Abstract:
Integrated quantum photonics devices in diamond have tremendous potential for many quantum applications, including long-distance quantum communication, quantum information processing, and quantum sensing. These devices benefit from diamond's combination of exceptional thermal, optical, and mechanical properties. Its wide electronic bandgap makes diamond an ideal host for a variety of optical activ…
▽ More
Integrated quantum photonics devices in diamond have tremendous potential for many quantum applications, including long-distance quantum communication, quantum information processing, and quantum sensing. These devices benefit from diamond's combination of exceptional thermal, optical, and mechanical properties. Its wide electronic bandgap makes diamond an ideal host for a variety of optical active spin qubits that are key building blocks for quantum technologies. In landmark experiments, diamond spin qubits have enabled demonstrations of remote entanglement, memory-enhanced quantum communication, and multi-qubit spin registers with fault-tolerant quantum error correction, leading to the realization of multinode quantum networks. These advancements put diamond at the forefront of solid-state material platforms for quantum information processing. Recent developments in diamond nanofabrication techniques provide a promising route to further scaling of these landmark experiments towards real-life quantum technologies. In this paper, we focus on the recent progress in creating integrated diamond quantum photonic devices, with particular emphasis on spin-photon interfaces, cavity optomechanical devices, and spin-phonon transduction. Finally, we discuss prospects and remaining challenges for the use of diamond in scalable quantum technologies.
△ Less
Submitted 18 July, 2022;
originally announced July 2022.
-
Widely-tunable, doubly-resonant Raman scattering on diamond in an open microcavity
Authors:
Sigurd Flågan,
Patrick Maletinsky,
Richard J. Warburton,
Daniel Riedel
Abstract:
Raman lasers based on bulk diamond are a valuable resource for generating coherent light in wavelength regimes where no common laser diodes are available. Nevertheless, the widespread use of such lasers is limited by their high threshold power requirements on the order of several Watts. Using on-chip microresonators, a significant reduction of the lasing threshold by more than two orders of magnit…
▽ More
Raman lasers based on bulk diamond are a valuable resource for generating coherent light in wavelength regimes where no common laser diodes are available. Nevertheless, the widespread use of such lasers is limited by their high threshold power requirements on the order of several Watts. Using on-chip microresonators, a significant reduction of the lasing threshold by more than two orders of magnitude has been shown. However, these resonators lack a continuous tuning mechanism and, mainly due to fabrication limitations, their implementation in the visible remains elusive. Here, we propose a platform for a diamond Raman laser in the visible. The device is based on a miniaturized, open-access Fabry-Perot cavity. Our microcavity provides widely-tunable doubly-resonant enhancement of Raman scattering from high quality single-crystalline diamond. We demonstrate a $>$THz continuous tuning range of doubly-resonant Raman scattering, a range limited only by the reflective stopband of the mirrors. Based on the experimentally determined quality factors exceeding $300\,000$, our theoretical analysis suggests that, with realistic improvements, a sub-mW threshold is readily within reach. Our findings pave the way to the creation of a universal low-power frequency shifter, a potentially valuable addition to the nonlinear optics toolbox.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
High quality-factor diamond-confined open microcavity
Authors:
Sigurd Flågan,
Daniel Riedel,
Alisa Javadi,
Tomasz Jakubczyk,
Patrick Maletinsky,
Richard J. Warburton
Abstract:
With a highly coherent, optically addressable electron spin, the nitrogen vacancy (NV) centre in diamond is a promising candidate for a node in a quantum network. However, the NV centre is a poor source of coherent single photons owing to a long radiative lifetime, a small branching ratio into the zero-phonon line (ZPL) and a poor extraction efficiency out of the high-index host material. In princ…
▽ More
With a highly coherent, optically addressable electron spin, the nitrogen vacancy (NV) centre in diamond is a promising candidate for a node in a quantum network. However, the NV centre is a poor source of coherent single photons owing to a long radiative lifetime, a small branching ratio into the zero-phonon line (ZPL) and a poor extraction efficiency out of the high-index host material. In principle, these three shortcomings can be addressed by resonant coupling to a single mode of an optical cavity. Utilising the weak-coupling regime of cavity electrodynamics, resonant coupling between the ZPL and a single cavity-mode enhances the transition rate and branching ratio into the ZPL. Furthermore, the cavity channels the light into a well-defined mode thereby facilitating detection with external optics. Here, we present an open Fabry-Perot microcavity geometry containing a single-crystal diamond membrane, which operates in a regime where the vacuum electric field is strongly confined to the diamond membrane. There is a field anti-node at the diamond-air interface. Despite the presence of surface losses, quality factors exceeding $120\,000$ and a finesse $\mathcal{F}=11\,500$ were observed. We investigate the interplay between different loss mechanisms, and the impact these loss channels have on the performance of the cavity. This analysis suggests that the "waviness" (roughness with a spatial frequency comparable to that of the microcavity mode) is the mechanism preventing the quality factors from reaching even higher values. Finally, we apply the extracted cavity parameters to the NV centre and calculate a predicted Purcell factor exceeding 150.
△ Less
Submitted 18 May, 2021;
originally announced May 2021.
-
Low charge-noise nitrogen-vacancy centers in diamond created using laser writing with a solid-immersion lens
Authors:
Viktoria Yurgens,
Josh A. Zuber,
Sigurd Flågan,
Marta De Luca,
Brendan J. Shields,
Ilaria Zardo,
Patrick Maletinsky,
Richard J. Warburton,
Tomasz Jakubczyk
Abstract:
We report on pulsed-laser induced generation of nitrogen-vacancy (NV) centers in diamond facilitated by a solid-immersion lens (SIL). The SIL enables laser writing at energies as low as 5.8 nJ per pulse and allows vacancies to be formed close to a diamond surface without inducing surface graphitization. We operate in the previously unexplored regime where lattice vacancies are created following tu…
▽ More
We report on pulsed-laser induced generation of nitrogen-vacancy (NV) centers in diamond facilitated by a solid-immersion lens (SIL). The SIL enables laser writing at energies as low as 5.8 nJ per pulse and allows vacancies to be formed close to a diamond surface without inducing surface graphitization. We operate in the previously unexplored regime where lattice vacancies are created following tunneling breakdown rather than multiphoton ionization. We present three samples in which NV-center arrays were laser-written at distances between ~1 $μ$m and 40 $μ$m from a diamond surface, all presenting narrow distributions of optical linewidths with means between 62.1 MHz and 74.5 MHz. The linewidths include the effect of long-term spectral diffusion induced by a 532 nm repump laser for charge-state stabilization, thereby emphasizing the particularly low charge-noise environment of the created color centers. Such high-quality NV centers are excellent candidates for practical applications employing two-photon quantum interference with separate NV centers. Finally, we propose a model for disentangling power broadening from inhomogeneous broadening in the NV center optical linewidth.
△ Less
Submitted 11 August, 2021; v1 submitted 23 February, 2021;
originally announced February 2021.
-
Statistically Modeling Optical Linewidths of Nitrogen Vacancy Centers in Post-Implanted Nanostructures
Authors:
Mark Kasperczyk,
Josh A. Zuber,
Arne Barfuss,
Johannes Kölbl,
Viktoria Yurgens,
Sigurd Flågan,
Tomasz Jakubczyk,
Brendan Shields,
Richard J. Warburton,
Patrick Maletinsky
Abstract:
We investigate the effects of a novel approach to diamond nanofabrication and nitrogen vacancy (NV) center formation on the optical linewidth of the NV zero-phonon line (ZPL). In this post-implantation method, nitrogen is implanted after all fabrication processes have been completed. We examine three post-implanted samples, one implanted with $^{14}$N and two with $^{15}$N isotopes. We perform pho…
▽ More
We investigate the effects of a novel approach to diamond nanofabrication and nitrogen vacancy (NV) center formation on the optical linewidth of the NV zero-phonon line (ZPL). In this post-implantation method, nitrogen is implanted after all fabrication processes have been completed. We examine three post-implanted samples, one implanted with $^{14}$N and two with $^{15}$N isotopes. We perform photoluminescence excitation (PLE) spectroscopy to assess optical linewidths and optically detected magnetic resonance (ODMR) measurements to isotopically classify the NV centers. From this, we find that NV centers formed from nitrogen naturally occuring in the diamond lattice are characterized by a linewidth distribution peaked at an optical linewidth nearly two orders of magnitude smaller than the distribution characterizing most of the NV centers formed from implanted nitrogen. Surprisingly, we also observe a number of $^{15}$NV centers with narrow ($<500\,\mathrm{MHz}$) linewidths, implying that implanted nitrogen can yield NV centers with narrow optical linewidths. We further use a Bayesian approach to statistically model the linewidth distributions, to accurately quantify the uncertainty of fit parameters in our model, and to predict future linewidths within a particular sample. Our model is designed to aid comparisons between samples and research groups, in order to determine the best methods of achieving narrow NV linewidths in structured samples.
△ Less
Submitted 21 September, 2020; v1 submitted 7 May, 2020;
originally announced May 2020.
-
Cavity-enhanced Raman scattering for in situ alignment and characterization of solid-state microcavities
Authors:
Daniel Riedel,
Sigurd Flågan,
Patrick Maletinsky,
Richard J. Warburton
Abstract:
We report cavity-enhanced Raman scattering from a single-crystal diamond membrane embedded in a highly miniaturized fully-tunable Fabry-Pérot cavity. The Raman intensity is enhanced 58.8-fold compared to the corresponding confocal measurement. The strong signal amplification results from the Purcell effect. We show that the cavity-enhanced Raman scattering can be harnessed as a narrowband, high-in…
▽ More
We report cavity-enhanced Raman scattering from a single-crystal diamond membrane embedded in a highly miniaturized fully-tunable Fabry-Pérot cavity. The Raman intensity is enhanced 58.8-fold compared to the corresponding confocal measurement. The strong signal amplification results from the Purcell effect. We show that the cavity-enhanced Raman scattering can be harnessed as a narrowband, high-intensity, internal light-source. The Raman process can be triggered in a simple way by using an optical excitation frequency outside the cavity stopband and is independent of the lateral positioning of the cavity mode with respect to the diamond membrane. The strong Raman signal emerging from the cavity output facilitates in situ mode-matching of the cavity mode to single-mode collection optics; it also represents a simple way of measuring the dispersion and spatial intensity-profile of the cavity modes. The optimization of the cavity performance via the strong Raman process is extremely helpful in achieving efficient cavity-outcoupling of the relatively weak emission of single color-centers such as nitrogen-vacancy centers in diamond or rare-earth ions in crystalline hosts with low emitter density.
△ Less
Submitted 26 September, 2019;
originally announced September 2019.
