-
Development of proton beam irradiation system for the NA65/DsTau experiment
Authors:
Shigeki Aoki,
Akitaka Ariga,
Tomoko Ariga,
Nikolaos Charitonidis,
Sergey Dmitrievsky,
Radu Dobre,
Elena Firu,
Yury Gornushkin,
Ali Murat Guler,
Daiki Hayakawa,
Koichi Kodama,
Masahiro Komatsu,
Umut Kose,
Madalina Mihaela Miloi,
Manato Miura,
Mitsuhiro Nakamura,
Toshiyuki Nakano,
Alina-Tania Neagu,
Toranosuke Okumura,
Canay Oz,
Hiroki Rokujo,
Osamu Sato,
Svetlana Vasina,
Junya Yoshida,
Masahiro Yoshimoto
, et al. (1 additional authors not shown)
Abstract:
Tau neutrino is the least studied lepton of the Standard Model (SM). The NA65/DsTau experiment targets to investigate $D_s$, the parent particle of the $ν_τ$, using the nuclear emulsion-based detector and to decrease the systematic uncertainty of $ν_τ$ flux prediction from over 50% to 10% for future beam dump experiments. In the experiment, the emulsion detectors are exposed to the CERN SPS 400 Ge…
▽ More
Tau neutrino is the least studied lepton of the Standard Model (SM). The NA65/DsTau experiment targets to investigate $D_s$, the parent particle of the $ν_τ$, using the nuclear emulsion-based detector and to decrease the systematic uncertainty of $ν_τ$ flux prediction from over 50% to 10% for future beam dump experiments. In the experiment, the emulsion detectors are exposed to the CERN SPS 400 GeV proton beam. To provide optimal conditions for the reconstruction of interactions, the protons are required to be uniformly distributed over the detector's surface with an average density of $10^5~\rm{cm^{-2}}$ and the fluctuation of less than 10%. To address this issue, we developed a new proton irradiation system called the target mover. The new target mover provided irradiation with a proton density of $0.98~\rm{cm^{-2}}$ and the density fluctuation of $2.0\pm 0.3$% in the DsTau 2021 run.
△ Less
Submitted 3 April, 2024; v1 submitted 23 March, 2023;
originally announced March 2023.
-
Radiation hardness of GaAs: Cr and Si sensors irradiated by electron beam
Authors:
U. Kruchonak,
S. Abou El-Azm,
K. Afanaciev,
G. Chelkov,
M. Demichev,
M. Gostkin,
A. Guskov,
E. Firu,
V. Kobets,
A. Leyva,
d,
A. Nozdrin,
S. Porokhovoy,
A. Sheremetyeva,
P. Smolyanskiy,
A. Torres,
A. Tyazhev,
O. Tolbanov,
N. Zamyatin,
A. Zarubin,
A. Zhemchugov
Abstract:
The interest in using the radiation detectors based on high resistive chromium-compensated GaAs (GaAs:Cr) in high energy physics and others applied fields has been growing steadily due to its numerous advantages over others classical materials. High radiation hardness at room temperature stands out and needs to be systematically investigated. In this paper an experimental study of the effect of 20…
▽ More
The interest in using the radiation detectors based on high resistive chromium-compensated GaAs (GaAs:Cr) in high energy physics and others applied fields has been growing steadily due to its numerous advantages over others classical materials. High radiation hardness at room temperature stands out and needs to be systematically investigated. In this paper an experimental study of the effect of 20.9 MeV electrons generated by the LINAC-200 accelerator on some properties of GaAs:Cr based sensors is presented. In parallel, Si sensors were irradiated at the same conditions, measured and analyzed in order to perform a comparative study. The target sensors were irradiated with the dose up to 1.5 MGy. The current-voltage characteristics, resistivity, charge collection efficiency and their dependences on the bias voltage and temperature were measured at different absorbed doses. An analysis of the possible microscopic mechanisms leading to the observed effects in GaAs:Cr sensors is presented in the article.
△ Less
Submitted 1 June, 2020;
originally announced June 2020.
-
Unstable states in dissociation of relativistic nuclei. Recent findings and prospects of researches
Authors:
D. A. Artemenkov,
V. Bradnova,
M. M. Chernyavsky,
E. Firu,
M. Haiduc,
N. K. Kornegrutsa,
A. I. Malakhov,
E. Mitsova,
A. Neagu,
N. G. Peresadko,
V. V. Rusakova,
R. Stanoeva,
A. A. Zaitsev,
I. G. Zarubina,
P. I. Zarubin
Abstract:
The invariant mass method is used to identify the $^8$Be and $^9$B nuclei and Hoyle state formed in dissociation of relativistic nuclei in a nuclear track emulsion. It is shown that to identify these extremely short-lived states in the case of the isotopes $^9$Be, $^{10}$B, $^{10}$C, $^{11}$C, $^{12}$C, and $^{16}$O, it is sufficient to determine the invariant mass as a function of the angles in p…
▽ More
The invariant mass method is used to identify the $^8$Be and $^9$B nuclei and Hoyle state formed in dissociation of relativistic nuclei in a nuclear track emulsion. It is shown that to identify these extremely short-lived states in the case of the isotopes $^9$Be, $^{10}$B, $^{10}$C, $^{11}$C, $^{12}$C, and $^{16}$O, it is sufficient to determine the invariant mass as a function of the angles in pairs and triples of He and H fragments in the approximation of the conservation of momentum per nucleon of the parent nucleus. According to the criteria established in this way, the contribution of these three unstable states was evaluated in the relativistic fragmentation of the $^{28}$Si and $^{197}$Au nuclei.
△ Less
Submitted 21 September, 2020; v1 submitted 21 April, 2020;
originally announced April 2020.
-
Prospects of nuclear clustering studies via dissociation of relativistic nuclei in nuclear track emulsion
Authors:
D A Artemenkov,
V Bradnova,
E Firu,
M Haiduc,
N K Kornegrutsa,
A I Malakhov,
E Mitsova,
A Neagu,
N G Peresadko,
V V Rusakova,
R Stanoeva,
A A Zaitsev,
I G Zarubina,
P I Zarubin
Abstract:
Status and prospects of nuclear clustering studies by dissociation of relativistic nuclei in nuclear track emulsion are presented. The unstable $^{8}$Be and $^{9}$B nuclei are identified in dissociation of the isotopes $^{9}$Be, $^{10}$B, $^{10}$C and $^{11}$C, and the Hoyle state in the cases $^{12}$C and $^{16}$O. On this ground searching for the Hoyle state and more complex $α$-particle states…
▽ More
Status and prospects of nuclear clustering studies by dissociation of relativistic nuclei in nuclear track emulsion are presented. The unstable $^{8}$Be and $^{9}$B nuclei are identified in dissociation of the isotopes $^{9}$Be, $^{10}$B, $^{10}$C and $^{11}$C, and the Hoyle state in the cases $^{12}$C and $^{16}$O. On this ground searching for the Hoyle state and more complex $α$-particle states in the dissociation of the heavier nuclei is suggested. A detailed study of a low-density baryonic matter arising in dissociation of the heaviest nuclei is forthcoming long-term problem. An analysis of nuclear fragmentation induced by relativistic muons is proposed to examine the mechanism dissociation.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
DsTau: Study of tau neutrino production with 400 GeV protons from the CERN-SPS
Authors:
Shigeki Aoki,
Akitaka Ariga,
Tomoko Ariga,
Sergey Dmitrievsky,
Elena Firu,
Dean Forshaw,
Tsutomu Fukuda,
Yuri Gornushkin,
Ali Murat Guler,
Maria Haiduc,
Koichi Kodama,
Masahiro Komatsu,
Muhtesem Akif Korkmaz,
Umut Kose,
Madalina Miloi,
Antonio Miucci,
Motoaki Miyanishi,
Mitsuhiro Nakamura,
Toshiyuki Nakano,
Alina Neagu,
Hiroki Rokujo,
Osamu Sato,
Elizaveta Sitnikova,
Yosuke Suzuki,
Tomoki Takao
, et al. (5 additional authors not shown)
Abstract:
In the DsTau experiment at the CERN SPS, an independent and direct way to measure tau neutrino production following high energy proton interactions was proposed. As the main source of tau neutrinos is a decay of Ds mesons, produced in proton-nucleus interactions, the project aims at measuring a differential cross section of this reaction. The experimental method is based on a use of high resolutio…
▽ More
In the DsTau experiment at the CERN SPS, an independent and direct way to measure tau neutrino production following high energy proton interactions was proposed. As the main source of tau neutrinos is a decay of Ds mesons, produced in proton-nucleus interactions, the project aims at measuring a differential cross section of this reaction. The experimental method is based on a use of high resolution emulsion detectors for effective registration of events with short lived particle decays. Here we present the motivation of the study, details of the experimental technique, and the first results of the analysis of the data collected during test runs, which prove feasibility of the full scale study of the process in future.
△ Less
Submitted 8 June, 2019;
originally announced June 2019.
-
Detector Technologies for CLIC
Authors:
A. C. Abusleme Hoffman,
G. Parès,
T. Fritzsch,
M. Rothermund,
H. Jansen,
K. Krüger,
F. Sefkow,
A. Velyka,
J. Schwandt,
I. Perić,
L. Emberger,
C. Graf,
A. Macchiolo,
F. Simon,
M. Szalay,
N. van der Kolk,
H. Abramowicz,
Y. Benhammou,
O. Borysov,
M. Borysova,
A. Joffe,
S. Kananov,
A. Levy,
I. Levy,
G. Eigen
, et al. (107 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a high-energy high-luminosity linear electron-positron collider under development. It is foreseen to be built and operated in three stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. It offers a rich physics program including direct searches as well as the probing of new physics through a broad set of precision measurements of Stan…
▽ More
The Compact Linear Collider (CLIC) is a high-energy high-luminosity linear electron-positron collider under development. It is foreseen to be built and operated in three stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. It offers a rich physics program including direct searches as well as the probing of new physics through a broad set of precision measurements of Standard Model processes, particularly in the Higgs-boson and top-quark sectors. The precision required for such measurements and the specific conditions imposed by the beam dimensions and time structure put strict requirements on the detector design and technology. This includes low-mass vertexing and tracking systems with small cells, highly granular imaging calorimeters, as well as a precise hit-time resolution and power-pulsed operation for all subsystems. A conceptual design for the CLIC detector system was published in 2012. Since then, ambitious R&D programmes for silicon vertex and tracking detectors, as well as for calorimeters have been pursued within the CLICdp, CALICE and FCAL collaborations, addressing the challenging detector requirements with innovative technologies. This report introduces the experimental environment and detector requirements at CLIC and reviews the current status and future plans for detector technology R&D.
△ Less
Submitted 7 May, 2019;
originally announced May 2019.
-
Toward ternary fission accompanied by the ${}^{8}$Be nucleus
Authors:
D. A. Artemenkov,
V. Bradnova,
M. V. Gustova,
O. M. Ivanov,
R. R. Kattabekov,
K. Z. Mamatkulov,
V. V. Rusakova,
A. V. Sabelnikov,
A. A. Zaitsev,
P. I. Zarubin,
I. G. Zarubina,
I. Ambrouzova,
M. Kakona,
M. Luuzova,
O. Ploc,
K. Turek,
E. Firu,
M. Haiduc,
A. Neagu,
R. Stanoeva
Abstract:
Experiments in preparation for search for uranium ternary fission by means of nuclear track emulsion are summarized. The study will be focused on the possible involvement of the unstable nucleus ${}^{8}$Be in the suggested scenario of the collinear tri-partition in the fission.
Experiments in preparation for search for uranium ternary fission by means of nuclear track emulsion are summarized. The study will be focused on the possible involvement of the unstable nucleus ${}^{8}$Be in the suggested scenario of the collinear tri-partition in the fission.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
Performance and Moli`ere radius measurements using a compact prototype of LumiCal in an electron test beam
Authors:
H. Abramowicz,
A. Abusleme,
K. Afanaciev,
Y. Benhammou,
O. Borysov,
M. Borysova,
I. Bozovic- Jelisavcic,
W. Daniluk,
D. Dannheim,
M. Demichev,
K. Elsener,
M. Firlej,
E. Firu,
T. Fiutowski,
V. Ghenescu,
M. Gostkin,
M. Hempelb,
H. Henschel,
M. Idzik,
A. Ignatenkoc,
A. Ishikawa,
A. Joffe,
G. Kacarevic,
S. Kananov,
O. Karachebanb
, et al. (29 additional authors not shown)
Abstract:
A new design of a detector plane of sub-millimetre thickness for an electromagnetic sampling calorimeter is presented. It is intended to be used in the luminometers LumiCal and BeamCal in future linear $e^+e^-$ collider experiments. The detector planes were produced utilising novel connectivity scheme technologies. They were installed in a compact prototype of the calorimeter and tested at DESY wi…
▽ More
A new design of a detector plane of sub-millimetre thickness for an electromagnetic sampling calorimeter is presented. It is intended to be used in the luminometers LumiCal and BeamCal in future linear $e^+e^-$ collider experiments. The detector planes were produced utilising novel connectivity scheme technologies. They were installed in a compact prototype of the calorimeter and tested at DESY with an electron beam of energy 1-5 GeV. The performance of a prototype of a compact LumiCal comprising eight detector planes was studied. The effective Moli`ere radius at 5 GeV was determined to be (8.1 +/- 0.1 (stat) +/- 0.3 (syst)) mm, a value well reproduced by the Monte Carlo (MC) simulation (8.4 +/- 0.1) mm. The dependence of the effective Moli`ere radius on the electron energy in the range 1-5 GeV was also studied. Good agreement was obtained between data and MC simulation.
△ Less
Submitted 25 October, 2019; v1 submitted 29 December, 2018;
originally announced December 2018.
-
Nuclear track emulsion in search for the Hoyle-state in dissociation of relativistic ${}^{12}$C nuclei
Authors:
D. A. Artemenkov,
V. Bradnova,
G. I. Britvich,
E. Firu,
M. Haiduc,
V. A. Kalinin,
S. P. Kharlamov,
N. K. Kornegrutsa,
M. Yu Kostin,
A. V. Maksimov,
E. Mitsevae,
A. Neagu,
V. A. Pikalov,
M. K. Polkovnikov,
V. V. Rusakova,
R. Stanoeva,
A. A. Zaitsev,
P. I. Zarubin,
I. G. Zarubina
Abstract:
Production of ensembles of $α$-particle triples associated with the Hoyle state (the second excited state of the ${}^{12}$C nucleus) in peripheral dissociation of relativistic ${}^{12}$C nuclei is studied. Stacks of nuclear track emulsion pellicles exposed to ${}^{12}$C with an energy from hundreds MeV to a few GeV per nucleon serve as the material for studies. The Hoyle state decays are reconstru…
▽ More
Production of ensembles of $α$-particle triples associated with the Hoyle state (the second excited state of the ${}^{12}$C nucleus) in peripheral dissociation of relativistic ${}^{12}$C nuclei is studied. Stacks of nuclear track emulsion pellicles exposed to ${}^{12}$C with an energy from hundreds MeV to a few GeV per nucleon serve as the material for studies. The Hoyle state decays are reconstructed via measurement of emission angles of $α$ particles with the precision sufficient for identification of the unstable ${}^{8}$Be nucleus. The estimate of the contribution of Hoyle's state to the ${}^{12}$C $\to$ 3$α$ dissociation is 10-15\%.
△ Less
Submitted 21 December, 2018;
originally announced December 2018.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Event by Event analysis of Maximum Pseudo-rapidity Gap Fluctuation in High energy Nucleus-nucleus Collisions
Authors:
Swarnapratim Bhattacharyya,
Maria Haiduc,
Alina Tania Neagu,
Elena Firu
Abstract:
A study of Event by Event analysis of maximum Pseudo-rapidity Gap Fluctuation in heavy-ion collisions in terms of the scaled variance ω has been carried out for relativistic AA collisions with multiplicity cut (N >10) using nuclear emulsion data at 4.5 AGeV/c. The values of scaled variance are found to be greater than zero indicating the presence of strong fluctuation of maximum rap gap values in…
▽ More
A study of Event by Event analysis of maximum Pseudo-rapidity Gap Fluctuation in heavy-ion collisions in terms of the scaled variance ω has been carried out for relativistic AA collisions with multiplicity cut (N >10) using nuclear emulsion data at 4.5 AGeV/c. The values of scaled variance are found to be greater than zero indicating the presence of strong fluctuation of maximum rap gap values in the multiparticle production process. The event by event fluctuations are found to decrease with the increase of average multiplicity of the interactions. Experimental analysis has been compared with the results obtained from the analysis of events simulated by generating random numbers (MC-RAND events) and also by Ultra Relativistic Quantum Molecular Dynamics (UrQMD) model. UrQMD model simulated values of event by event fluctuations of maximum rapidity gap are less than the corresponding experimental values.
△ Less
Submitted 2 September, 2018;
originally announced September 2018.
-
Multifractal analysis of charged particle multiplicity distribution in the framework of Renyi entropy
Authors:
Swarnapratim Bhattacharyya,
Maria Haiduc,
Alina Tania Neagu,
Elena Firu
Abstract:
A study of multifractality and multifractal specific heat has been carried out for the produced shower particles in nuclear emulsion detector for 16O-AgBr, 28Si-AgBr and 32S-AgBr interactions at 4.5AGeV/c in the framework of Renyi entropy. Experimental results have been compared with the prediction of Ultra Relativistic Quantum Molecular Dynamics (UrQMD) model. Our analysis reveals the presence of…
▽ More
A study of multifractality and multifractal specific heat has been carried out for the produced shower particles in nuclear emulsion detector for 16O-AgBr, 28Si-AgBr and 32S-AgBr interactions at 4.5AGeV/c in the framework of Renyi entropy. Experimental results have been compared with the prediction of Ultra Relativistic Quantum Molecular Dynamics (UrQMD) model. Our analysis reveals the presence of multifractality in the multiparticle production process in high energy nucleus-nucleus interactions. Degree of multifractality is found to be higher for the experimental data and it increases with the increase of projectile mass. The investigation of quark-hadron phase transition in the multiparticle production in 16O-AgBr, 28Si-AgBr and 32S-AgBr interactions at 4.5 AGeV/c in the framework of Ginzburg-Landau theory from the concept of multifractality has also been presented. Evidence of constant multifractal specific heat has been obtained for both experimental and UrQMD simulated data.
△ Less
Submitted 22 May, 2018; v1 submitted 19 February, 2018;
originally announced February 2018.
-
Projectile Fragmentation of relativistic nuclei in peripheral Collisions
Authors:
Swarnapratim Bhattacharyya,
Maria Haiduc,
Alina Tania Neagu,
Elena Firu
Abstract:
A study of multiplicity distribution of singly charged, doubly charged, multi charged projectile fragments and shower particles have been carried out for the peripheral collisions in 16O-emulsion,22Ne-emulsion and 28Si-emulsion interactions at an incident momentum of (4.1-4.5) AGeV/c. Events having no target fragments have been designated as peripheral collision events. Percentage of peripheral ev…
▽ More
A study of multiplicity distribution of singly charged, doubly charged, multi charged projectile fragments and shower particles have been carried out for the peripheral collisions in 16O-emulsion,22Ne-emulsion and 28Si-emulsion interactions at an incident momentum of (4.1-4.5) AGeV/c. Events having no target fragments have been designated as peripheral collision events. Percentage of peripheral events has been found to increase with the increase of projectile mass. Dispersion of the multiplicity distribution and its dependence on projectile mass for projectile fragments and shower particles has also been investigated. Dependence of average multiplicity of projectile fragments and shower particles on the mass of the projectile beam has been studied. Study of different fragmentation mode during the emission of multi charged projectile fragments has also been carried out.
△ Less
Submitted 19 February, 2018; v1 submitted 4 September, 2017;
originally announced September 2017.
-
Study of tau-neutrino production at the CERN SPS
Authors:
S. Aoki,
A. Ariga,
T. Ariga,
E. Firu,
T. Fukuda,
Y. Gornushkin,
A. M. Guler,
M. Haiduc,
K. Kodama,
M. A. Korkmaz,
U. Kose,
M. Nakamura,
T. Nakano,
A. T. Neagu,
H. Rokujo,
O. Sato,
S. Vasina,
M. Vladymyrov,
M. Yoshimoto
Abstract:
The DsTau project proposes to study tau-neutrino production in high-energy proton interactions. The outcome of this experiment are prerequisite for measuring the $ν_τ$ charged-current cross section that has never been well measured. Precisely measuring the cross section would enable testing of lepton universality in $ν_τ$ scattering and it also has practical implications for neutrino oscillation e…
▽ More
The DsTau project proposes to study tau-neutrino production in high-energy proton interactions. The outcome of this experiment are prerequisite for measuring the $ν_τ$ charged-current cross section that has never been well measured. Precisely measuring the cross section would enable testing of lepton universality in $ν_τ$ scattering and it also has practical implications for neutrino oscillation experiments and high-energy astrophysical $ν_τ$ observations. $D_s$ mesons, the source of tau neutrinos, following high-energy proton interactions will be studied by a novel approach to detect the double-kink topology of the decays $D_s \rightarrow τν_τ$ and $τ\rightarrowν_τX$. Directly measuring $D_s\rightarrow τ$ decays will provide an inclusive measurement of the $D_s$ production rate and decay branching ratio to $τ$. The momentum reconstruction of $D_s$ will be performed by combining topological variables. This project aims to detect 1,000 $D_s \rightarrow τ$ decays in $2.3 \times 10^8$ proton interactions in tungsten target to study the differential production cross section of $D_s$ mesons. To achieve this, state-of-the-art emulsion detectors with a nanometric-precision readout will be used. The data generated by this project will enable the $ν_τ$ cross section from DONUT to be re-evaluated, and this should significantly reduce the total systematic uncertainty. Furthermore, these results will provide essential data for future $ν_τ$ experiments such as the $ν_τ$ program in the SHiP project at CERN. In addition, the analysis of $2.3 \times 10^8$ proton interactions, combined with the expected high yield of $10^5$ charmed decays as by-products, will enable the extraction of additional physical quantities.
△ Less
Submitted 29 August, 2017;
originally announced August 2017.
-
A Comparative Study of kaon to pion ratio in Proton-Proton Collisions at different energies ---Experimental Results vs. Model Simulation
Authors:
Swarnapratim Bhattacharyya,
Maria Haiduc,
Alina Tania Neagu,
Elena Firu
Abstract:
A detailed study of energy dependence of positive kaon to pion, negative kaon to pion and total kaon to pion multiplicity ratio have been carried out in pp collisions at 6.3, 17.3, 62.4, 200 and 900 GeV and also at root s =2.76 TeV and 7 TeV in the framework of UrQMD and DPMJET III model. Energy dependence of positive kaon to pion and negative kaon to pion show different behavior in case of UrQMD…
▽ More
A detailed study of energy dependence of positive kaon to pion, negative kaon to pion and total kaon to pion multiplicity ratio have been carried out in pp collisions at 6.3, 17.3, 62.4, 200 and 900 GeV and also at root s =2.76 TeV and 7 TeV in the framework of UrQMD and DPMJET III model. Energy dependence of positive kaon to pion and negative kaon to pion show different behavior in case of UrQMD and DPMJET III model. The presence of the horn like structure in the variation of positive kaon to pion and negative kaon to pion ratio with energy for the experimental data is supported by the DPMJET III model. Experimentally it has been observed that as energy increases, the total kaon to pion multiplicity ratio increases systematically for pp collisions at lower energies and becomes independent of energy in LHC energy regime. Our analysis on total kaon to pion multiplicity ratio with UrQMD data is well supported by the experimental results obtained by different collaborations in different times. In case of DPMJET III data, the saturation of kaon to pion ratio at LHC region has not been observed.
△ Less
Submitted 3 December, 2017; v1 submitted 23 July, 2017;
originally announced July 2017.
-
Measurement of shower development and its Molière radius with a four-plane LumiCal test set-up
Authors:
H. Abramowicz,
A. Abusleme,
K. Afanaciev,
Y. Benhammou,
L. Bortko,
O. Borysov,
M. Borysova,
I. Bozovic-Jelisavcic,
G. Chelkov,
W. Daniluk,
D. Dannheim,
K. Elsener,
M. Firlej,
E. Firu,
T. Fiutowski,
V. Ghenescu,
M. Gostkin,
M. Hempel,
H. Henschel,
M. Idzik,
A. Ignatenko,
A. Ishikawa,
S. Kananov,
O. Karacheban,
W. Klempt
, et al. (35 additional authors not shown)
Abstract:
A prototype of a luminometer, designed for a future e+e- collider detector, and consisting at present of a four-plane module, was tested in the CERN PS accelerator T9 beam. The objective of this beam test was to demonstrate a multi-plane tungsten/silicon operation, to study the development of the electromagnetic shower and to compare it with MC simulations. The Molière radius has been determined t…
▽ More
A prototype of a luminometer, designed for a future e+e- collider detector, and consisting at present of a four-plane module, was tested in the CERN PS accelerator T9 beam. The objective of this beam test was to demonstrate a multi-plane tungsten/silicon operation, to study the development of the electromagnetic shower and to compare it with MC simulations. The Molière radius has been determined to be 24.0 +/- 0.6 (stat.) +/- 1.5 (syst.) mm using a parametrization of the shower shape. Very good agreement was found between data and a detailed Geant4 simulation.
△ Less
Submitted 12 March, 2018; v1 submitted 10 May, 2017;
originally announced May 2017.
-
Higgs Physics at the CLIC Electron-Positron Linear Collider
Authors:
H. Abramowicz,
A. Abusleme,
K. Afanaciev,
N. Alipour Tehrani,
C. Balázs,
Y. Benhammou,
M. Benoit,
B. Bilki,
J. -J. Blaising,
M. J. Boland,
M. Boronat,
O. Borysov,
I. Božović-Jelisavčić,
M. Buckland,
S. Bugiel,
P. N. Burrows,
T. K. Charles,
W. Daniluk,
D. Dannheim,
R. Dasgupta,
M. Demarteau,
M. A. Díaz Gutierrez,
G. Eigen,
K. Elsener,
U. Felzmann
, et al. (99 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is an option for a future e+e- collider operating at centre-of-mass energies up to 3 TeV, providing sensitivity to a wide range of new physics phenomena and precision physics measurements at the energy frontier. This paper is the first comprehensive presentation of the Higgs physics reach of CLIC operating at three energy stages: sqrt(s) = 350 GeV, 1.4 TeV and 3…
▽ More
The Compact Linear Collider (CLIC) is an option for a future e+e- collider operating at centre-of-mass energies up to 3 TeV, providing sensitivity to a wide range of new physics phenomena and precision physics measurements at the energy frontier. This paper is the first comprehensive presentation of the Higgs physics reach of CLIC operating at three energy stages: sqrt(s) = 350 GeV, 1.4 TeV and 3 TeV. The initial stage of operation allows the study of Higgs boson production in Higgsstrahlung (e+e- -> ZH) and WW-fusion (e+e- -> Hnunu), resulting in precise measurements of the production cross sections, the Higgs total decay width Gamma_H, and model-independent determinations of the Higgs couplings. Operation at sqrt(s) > 1 TeV provides high-statistics samples of Higgs bosons produced through WW-fusion, enabling tight constraints on the Higgs boson couplings. Studies of the rarer processes e+e- -> ttH and e+e- -> HHnunu allow measurements of the top Yukawa coupling and the Higgs boson self-coupling. This paper presents detailed studies of the precision achievable with Higgs measurements at CLIC and describes the interpretation of these measurements in a global fit.
△ Less
Submitted 5 June, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
Updated baseline for a staged Compact Linear Collider
Authors:
The CLIC,
CLICdp collaborations,
:,
M. J. Boland,
U. Felzmann,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
C. Balazs,
T. K. Charles,
K. Afanaciev,
I. Emeliantchik,
A. Ignatenko,
V. Makarenko,
N. Shumeiko,
A. Patapenka,
I. Zhuk,
A. C. Abusleme Hoffman,
M. A. Diaz Gutierrez,
M. Vogel Gonzalez,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu
, et al. (493 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.
△ Less
Submitted 27 March, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
ECFA Detector R&D Panel, Review Report
Authors:
The FCAL Collaboration,
H. Abramowicz,
A. Abusleme,
K. Afanaciev,
J. Aguilar,
E. Alvarez,
P. Bambade,
L. Bortko,
I. Bozovic-Jelisavcic,
E. Castro,
G. Chelkov,
C. Coca,
W. Daniluk,
A. Dragone,
L. Dumitru,
K. Elsener,
I. Emeliantchik,
E. Firu,
J. Fischer,
T. Fiutowski,
V. Ghenescu,
M. Gostkin,
G. Grzelak,
G. Haller,
H. Henschel
, et al. (46 additional authors not shown)
Abstract:
Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to measure the rate of low angle Bhabha scattering events with a precision better than 10$^{-3}$ at the ILC and 10$^{-2}$ at CLIC, and a low polar-angle calorimeter (BeamCal). The latter will be hit by a large amount of beamstrahlung remnants. The in…
▽ More
Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to measure the rate of low angle Bhabha scattering events with a precision better than 10$^{-3}$ at the ILC and 10$^{-2}$ at CLIC, and a low polar-angle calorimeter (BeamCal). The latter will be hit by a large amount of beamstrahlung remnants. The intensity and the spatial shape of these depositions will provide a fast luminosity estimate, as well as determination of beam parameters. The sensors of this calorimeter must be radiation-hard. Both devices will improve the e.m. hermeticity of the detector in the search for new particles. Finely segmented and very compact electromagnetic calorimeters will match these requirements. Due to the high occupancy, fast front-end electronics will be needed. Monte Carlo studies were performed to investigate the impact of beam-beam interactions and physics background processes on the luminosity measurement, and of beamstrahlung on the performance of BeamCal, as well as to optimise the design of both calorimeters. Dedicated sensors, front-end and ADC ASICs have been designed for the ILC and prototypes are available. Prototypes of sensor planes fully assembled with readout electronics have been studied in electron beams.
△ Less
Submitted 19 November, 2014; v1 submitted 18 November, 2014;
originally announced November 2014.
-
Performance of fully instrumented detector planes of the forward calorimeter of a Linear Collider detector
Authors:
The FCAL Collaboration,
H. Abramowicz,
A. Abusleme,
K. Afanaciev,
J. Aguilar,
E. Alvarez,
D. Avila,
Y. Benhammou,
L. Bortko,
O. Borysov,
M. Bergholz,
I. Bozovic-Jelisavcic,
E. Castro,
G. Chelkov,
C. Coca,
W. Daniluk,
L. Dumitru,
K. Elsener,
V. Fadeyev,
M. Firlej,
E. Firu,
T. Fiutowski,
V. Ghenescu,
M. Gostkin,
H. Henschel
, et al. (44 additional authors not shown)
Abstract:
Detector-plane prototypes of the very forward calorimetry of a future detector at an e+e- collider have been built and their performance was measured in an electron beam. The detector plane comprises silicon or GaAs pad sensors, dedicated front-end and ADC ASICs, and an FPGA for data concentration. Measurements of the signal-to-noise ratio and the response as a function of the position of the sens…
▽ More
Detector-plane prototypes of the very forward calorimetry of a future detector at an e+e- collider have been built and their performance was measured in an electron beam. The detector plane comprises silicon or GaAs pad sensors, dedicated front-end and ADC ASICs, and an FPGA for data concentration. Measurements of the signal-to-noise ratio and the response as a function of the position of the sensor are presented. A deconvolution method is successfully applied, and a comparison of the measured shower shape as a function of the absorber depth with a Monte-Carlo simulation is given.
△ Less
Submitted 1 June, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
Physics at the CLIC e+e- Linear Collider -- Input to the Snowmass process 2013
Authors:
Halina Abramowicz,
Angel Abusleme,
Konstatin Afanaciev,
Gideon Alexander,
Niloufar Alipour Tehrani,
Oscar Alonso,
Kristoffer K. Andersen,
Samir Arfaoui,
Csaba Balazs,
Tim Barklow,
Marco Battaglia,
Mathieu Benoit,
Burak Bilki,
Jean-Jacques Blaising,
Mark Boland,
Marça Boronat,
Ivanka Božović Jelisavčić,
Philip Burrows,
Maximilien Chefdeville,
Roberto Contino,
Dominik Dannheim,
Marcel Demarteau,
Marco Aurelio Diaz Gutierrez,
Angel Diéguez,
Jorge Duarte Campderros
, et al. (98 additional authors not shown)
Abstract:
This paper summarizes the physics potential of the CLIC high-energy e+e- linear collider. It provides input to the Snowmass 2013 process for the energy-frontier working groups on The Higgs Boson (HE1), Precision Study of Electroweak Interactions (HE2), Fully Understanding the Top Quark (HE3), as well as The Path Beyond the Standard Model -- New Particles, Forces, and Dimensions (HE4). It is accomp…
▽ More
This paper summarizes the physics potential of the CLIC high-energy e+e- linear collider. It provides input to the Snowmass 2013 process for the energy-frontier working groups on The Higgs Boson (HE1), Precision Study of Electroweak Interactions (HE2), Fully Understanding the Top Quark (HE3), as well as The Path Beyond the Standard Model -- New Particles, Forces, and Dimensions (HE4). It is accompanied by a paper describing the CLIC accelerator study, submitted to the Frontier Capabilities group of the Snowmass process.
△ Less
Submitted 30 September, 2013; v1 submitted 19 July, 2013;
originally announced July 2013.
-
Study of Peripheral Collisions of 56fe at 1 a Gev/c in Nuclear Emulsion
Authors:
E. Firu,
V. Bradnova,
M. Haiduc,
A. D. Kovalenko,
A. I. Malakhov,
A. T. Neagu,
P. A. Rukoyatkin,
V. V. Rusakova,
S. Vokal,
P. I. Zarubin
Abstract:
We have investigated the interactions of 1 A GeV 56Fe in nuclear emulsion. We measured the charge and the angular distributions of single and multiple charged relativistic particles emitted from peripheral interactions. We investigate a possible new method of separating interactions of electromagnetic origin. We provide the values of several parameters evaluated in a sample selected using the cl…
▽ More
We have investigated the interactions of 1 A GeV 56Fe in nuclear emulsion. We measured the charge and the angular distributions of single and multiple charged relativistic particles emitted from peripheral interactions. We investigate a possible new method of separating interactions of electromagnetic origin. We provide the values of several parameters evaluated in a sample selected using the classical method, and the method proposed in this paper.
△ Less
Submitted 8 February, 2010;
originally announced February 2010.
