-
Ultrafast Radiographic Imaging and Tracking: An overview of instruments, methods, data, and applications
Authors:
Zhehui Wang,
Andrew F. T. Leong,
Angelo Dragone,
Arianna E. Gleason,
Rafael Ballabriga,
Christopher Campbell,
Michael Campbell,
Samuel J. Clark,
Cinzia Da Vià,
Dana M. Dattelbaum,
Marcel Demarteau,
Lorenzo Fabris,
Kamel Fezzaa,
Eric R. Fossum,
Sol M. Gruner,
Todd Hufnagel,
Xiaolu Ju,
Ke Li,
Xavier Llopart,
Bratislav Lukić,
Alexander Rack,
Joseph Strehlow,
Audrey C. Therrien,
Julia Thom-Levy,
Feixiang Wang
, et al. (3 additional authors not shown)
Abstract:
Ultrafast radiographic imaging and tracking (U-RadIT) use state-of-the-art ionizing particle and light sources to experimentally study sub-nanosecond dynamic processes in physics, chemistry, biology, geology, materials science and other fields. These processes, fundamental to nuclear fusion energy, advanced manufacturing, green transportation and others, often involve one mole or more atoms, and t…
▽ More
Ultrafast radiographic imaging and tracking (U-RadIT) use state-of-the-art ionizing particle and light sources to experimentally study sub-nanosecond dynamic processes in physics, chemistry, biology, geology, materials science and other fields. These processes, fundamental to nuclear fusion energy, advanced manufacturing, green transportation and others, often involve one mole or more atoms, and thus are challenging to compute by using the first principles of quantum physics or other forward models. One of the central problems in U-RadIT is to optimize information yield through, e.g. high-luminosity X-ray and particle sources, efficient imaging and tracking detectors, novel methods to collect data, and large-bandwidth online and offline data processing, regulated by the underlying physics, statistics, and computing power. We review and highlight recent progress in: a.) Detectors; b.) U-RadIT modalities; c.) Data and algorithms; and d.) Applications. Hardware-centric approaches to U-RadIT optimization are constrained by detector material properties, low signal-to-noise ratio, high cost and long development cycles of critical hardware components such as ASICs. Interpretation of experimental data, including comparisons with forward models, is frequently hindered by sparse measurements, model and measurement uncertainties, and noise. Alternatively, U-RadIT make increasing use of data science and machine learning algorithms, including experimental implementations of compressed sensing. Machine learning and artificial intelligence approaches, refined by physics and materials information, may also contribute significantly to data interpretation, uncertainty quantification, and U-RadIT optimization.
△ Less
Submitted 4 September, 2023; v1 submitted 21 August, 2023;
originally announced August 2023.
-
Estimation of spatio-temporal temperature evolution during laser spot melting using in-situ dynamic x-ray radiography
Authors:
Rakesh R. Kamath,
Hahn Choo,
Kamel Fezzaa,
Sudarsanam Suresh Babu
Abstract:
Understanding the spatio-temporal evolution of thermal gradient (G) at and velocity (R) of the solid-liquid and liquid-vapor interfaces is critical for the control of site-specific microstructures in additive manufacturing. In-situ dynamic x-ray radiography (DXR) has been used in recent years to probe the evolution of R with high spatial and temporal resolutions. However, the current methods used…
▽ More
Understanding the spatio-temporal evolution of thermal gradient (G) at and velocity (R) of the solid-liquid and liquid-vapor interfaces is critical for the control of site-specific microstructures in additive manufacturing. In-situ dynamic x-ray radiography (DXR) has been used in recent years to probe the evolution of R with high spatial and temporal resolutions. However, the current methods used to measure the temperature (and therefore, G) are inadequate for sub-melt-pool surface measurement (e.g. thermography) or have lower resolution or limited field-of-view (e.g. x-ray diffraction). In this study, we demonstrate a novel approach to estimate the sub-surface temperature distribution and its time evolution with significantly higher resolutions using DXR data. This methodology uses the Beer-Lambert's law as a physical basis and is demonstrated using an in-situ laser spot-melting experiment on Ti-6Al-4V alloy.
△ Less
Submitted 5 July, 2023; v1 submitted 13 May, 2023;
originally announced May 2023.
-
Picosecond X-ray Imaging of Shockwaves with Non-Rankine-Hugoniot Behavior
Authors:
Christopher S. Campbell,
Mirza Akhter,
Samuel Clark,
Kamel Fezzaa,
Zhehui Wang,
David Staack
Abstract:
The first-known observation of plasma-induced cavitation bubbles and expanding shockwaves in liquid during plasma initiation timescales reveals deviation from expected Rankine-Hugoniot shock behavior due to coupled shock-cavitation dynamics, imaged using megahertz-framerate picosecond X-ray imaging. The imaging target features an inexpensive benchtop-scale pulsed plasma device used to generate wel…
▽ More
The first-known observation of plasma-induced cavitation bubbles and expanding shockwaves in liquid during plasma initiation timescales reveals deviation from expected Rankine-Hugoniot shock behavior due to coupled shock-cavitation dynamics, imaged using megahertz-framerate picosecond X-ray imaging. The imaging target features an inexpensive benchtop-scale pulsed plasma device used to generate well-timed spark discharges in ambient liquid heptane at an unprecedented repetition rate ($>$3/min) compared with more commonly used dynamic targets. These shockwaves are relatively weak (Mach number $\leq$ 1.4) compared with X-ray-imaged shockwaves in prior literature, advancing the resolution and sensitivity limits of this high-speed imaging diagnostic. Phase contrast imaging (PCI) has facilitated enhanced quantitative analysis of the expanding shocks in this work, via comparison to thermodynamic models and a Fresnel-Kirchhoff diffraction model.
△ Less
Submitted 17 October, 2023; v1 submitted 23 March, 2023;
originally announced March 2023.
-
Morphological stability of solid-liquid interfaces under additive manufacturing conditions
Authors:
D. Tourret,
J. Klemm-Toole,
A. Eres Castellanos,
B. Rodgers,
G. Becker,
A. Saville,
B. Ellyson,
C. Johnson,
B. Milligan,
J. Copley,
R. Ochoa,
A. Polonsky,
K. Pusch,
M. P. Haines,
K. Fezzaa,
T. Sun,
K. Clarke,
S. Babu,
T. Pollock,
A. Karma,
A. Clarke
Abstract:
Understanding rapid solidification behavior at velocities relevant to additive manufacturing (AM) is critical to controlling microstructure selection. Although in-situ visualization of solidification dynamics is now possible, systematic studies under AM conditions with microstructural outcomes compared to solidification theory remain lacking. Here we measure solid-liquid interface velocities of Ni…
▽ More
Understanding rapid solidification behavior at velocities relevant to additive manufacturing (AM) is critical to controlling microstructure selection. Although in-situ visualization of solidification dynamics is now possible, systematic studies under AM conditions with microstructural outcomes compared to solidification theory remain lacking. Here we measure solid-liquid interface velocities of Ni-Mo-Al alloy single crystals under AM conditions with synchrotron X-ray imaging, characterize the microstructures, and show discrepancies with classical theories regarding the onset velocity for absolute stability of a planar solid-liquid interface. Experimental observations reveal cellular/dendritic microstructures can persist at velocities larger than the expected absolute stability limit, where banded structure formation should theoretically appear. We show that theory and experimental observations can be reconciled by properly accounting for the effect of solute trap** and kinetic undercooling on the velocity-dependent solidus and liquidus temperatures of the alloy. Further theoretical developments and accurate assessments of key thermophysical parameters - like liquid diffusivities, solid-liquid interface excess free energies, and kinetic coefficients - remain needed to quantitatively investigate such discrepancies and pave the way for the prediction and control of microstructure selection under rapid solidification conditions.
△ Less
Submitted 16 March, 2023;
originally announced March 2023.
-
Vorticity-induced flow-focusing leads to bubble entrainment in an inkjet printhead: synchrotron X-ray and volume-of-fluid visualizations
Authors:
Maaike Rump,
Youssef Saade,
Uddalok Sen,
Kamel Fezzaa,
Michel Versluis,
Detlef Lohse,
Tim Segers
Abstract:
The oscillatory flows present in an inkjet printhead can lead to strong deformations of the air-liquid interface at the nozzle exit. Such deformations may lead to an inward directed air jet with bubble pinch-off and the subsequent entrainment of an air bubble, which is highly detrimental to the stability of inkjet printing. Understanding the mechanisms of bubble entrainment is therefore crucial in…
▽ More
The oscillatory flows present in an inkjet printhead can lead to strong deformations of the air-liquid interface at the nozzle exit. Such deformations may lead to an inward directed air jet with bubble pinch-off and the subsequent entrainment of an air bubble, which is highly detrimental to the stability of inkjet printing. Understanding the mechanisms of bubble entrainment is therefore crucial in improving print stability. In the present work, we use ultrafast X-ray phase-contrast imaging and direct numerical simulations based on the Volume-of-Fluid method to study the mechanisms underlying the bubble entrainment in a piezo-acoustic printhead. We first demonstrate good agreement between experiments and numerics. We then show the different classes of bubble pinch-off obtained in experiments, and that those were also captured numerically. The numerical results are then used to show that the baroclinic torque, which is generated at the gas-liquid interface due to the misalignment of density and pressure gradients, results in a flow-focusing effect that drives the formation of the air jet from which a bubble can pinch-off.
△ Less
Submitted 8 August, 2022; v1 submitted 13 May, 2022;
originally announced May 2022.
-
Structural study of TATB under detonation-induced shock conditions
Authors:
Elissaios Stavrou,
Michael Bagge-Hansen,
Joshua A. Hammons,
Michael H. Nielsen,
William L. Shaw,
Will Bassett,
Thomas W. Myers,
Lisa M. Lauderbach,
Ralph L. Hodgin,
Nicholas A. Perez-Marty,
Kamel Fezzaa,
Alex Deriy,
Sorin Bastea,
Laurence E. Fried,
Lara D. Leininger,
Trevor M. Willey
Abstract:
We explore the response of the insensitive high explosive (IHE) 1,3,5-Triamino-2,4,6- trinitrobenzene (TATB) under detonation-induced shock conditions using in-situ synchrotron X-ray diffraction in the 100 ns time scale using either a conventional or a colliding detonation drive. In all of the detonation experiments on various sizes and morphologies of TATB, we observe an extended stability of the…
▽ More
We explore the response of the insensitive high explosive (IHE) 1,3,5-Triamino-2,4,6- trinitrobenzene (TATB) under detonation-induced shock conditions using in-situ synchrotron X-ray diffraction in the 100 ns time scale using either a conventional or a colliding detonation drive. In all of the detonation experiments on various sizes and morphologies of TATB, we observe an extended stability of the TATB triclinic crystal structure. As the detonation front passes through the TATB, X-ray diffraction indicates a portion of the TATB exhibits a compression up to 30+ GPa, followed subsequently by a pressure release and continued decomposition over a few hundred nanoseconds. Likewise, for colliding detonation-driven shock compression of single crystals of TATB, a significant portion of the triclinic crystal structure appears to be stable up to 60+ GPa. Conversely, in similar detonations of a LLM-105 PBX, X-ray diffraction is simply indicative of decomposition without the apparent compression and slow decomposition seen in TATB. The results indicate the surprising resilience of TATB under these high-pressure, temperature and shock conditions, providing a baseline for understanding the insensitivity of TATB that is considered the industry standard for an insensitive high explosive. The results also provide intriguing information for the extended reaction zone in TATB, and the hot-spot mechanisms for initiating and propagating detonation in this uniquely insensitive explosive.
△ Less
Submitted 17 September, 2021; v1 submitted 22 November, 2020;
originally announced November 2020.
-
PhaseGAN: A deep-learning phase-retrieval approach for unpaired datasets
Authors:
Yuhe Zhang,
Mike Andreas Noack,
Patrik Vagovic,
Kamel Fezzaa,
Francisco Garcia-Moreno,
Tobias Ritschel,
Pablo Villanueva-Perez
Abstract:
Phase retrieval approaches based on DL provide a framework to obtain phase information from an intensity hologram or diffraction pattern in a robust manner and in real time. However, current DL architectures applied to the phase problem rely i) on paired datasets, i.e., they are only applicable when a satisfactory solution of the phase problem has been found, and ii) on the fact that most of them…
▽ More
Phase retrieval approaches based on DL provide a framework to obtain phase information from an intensity hologram or diffraction pattern in a robust manner and in real time. However, current DL architectures applied to the phase problem rely i) on paired datasets, i.e., they are only applicable when a satisfactory solution of the phase problem has been found, and ii) on the fact that most of them ignore the physics of the imaging process. Here, we present PhaseGAN, a new DL approach based on Generative Adversarial Networks, which allows the use of unpaired datasets and includes the physics of image formation. Performance of our approach is enhanced by including the image formation physics and provides phase reconstructions when conventional phase retrieval algorithms fail, such as ultra-fast experiments. Thus, PhaseGAN offers the opportunity to address the phase problem when no phase reconstructions are available, but good simulations of the object or data from other experiments are available, enabling us to obtain results not possible before.
△ Less
Submitted 19 November, 2020; v1 submitted 15 November, 2020;
originally announced November 2020.
-
Ultrafast X-ray imaging of pulsed plasmas in water
Authors:
Christopher Campbell,
Xin Tang,
Yancey Sechrest,
Kamel Fezzaa,
Zhehui Wang,
David Staack
Abstract:
Pulsed plasmas in liquids exhibit complex interaction between three phases of matter (liquids, gas, plasmas) and are currently used in a wide range of applications across several fields, however significant knowledge gaps in our understanding of plasma initiation in liquids hinder additional application and control; this area of research currently lacks a comprehensive predictive model. To aid pro…
▽ More
Pulsed plasmas in liquids exhibit complex interaction between three phases of matter (liquids, gas, plasmas) and are currently used in a wide range of applications across several fields, however significant knowledge gaps in our understanding of plasma initiation in liquids hinder additional application and control; this area of research currently lacks a comprehensive predictive model. To aid progress in this area experimentally, here we present the first-known ultrafast (50 ps) X-ray images of pulsed plasma initiation processes in water (+25 kV, 10 ns, 5 mJ), courtesy of the X-ray imaging techniques available at Argonne National Laboratory's Advanced Photon Source (APS), with supporting nanosecond optical imaging and a computational X-ray diffraction model. These results clearly resolve narrow (~10 micron) low-density plasma channels during initiation timescales typically obscured by optical emission (<100 ns), a well-known and difficult problem to plasma experiments without access to state-of-the-art X-ray sources such as the APS synchrotron. Images presented in this work speak to several of the prevailing plasma initiation hypotheses, supporting electrostriction and bubble deformation as dominant initiation phenomena. We also demonstrate the plasma setup used in this work as a cheap ($<$US\$100k), compact, and repeatable benchmark imaging target (29.1 km/s, 1 TW/cm$^2$) useful for the development of next-generation ultrafast imaging of high-energy-density physics (HEDP), as well as easier integration of HEDP research into synchrotron-enabled facilities.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Detonation-induced transformation of graphite to hexagonal diamond
Authors:
Elissaios Stavrou,
Michael Bagge-Hansen,
Joshua A. Hammons,
Michael H. Nielsen,
Bradley A. Steele,
Penghao Xiao,
Matthew P. Kroonblawd,
Matthew D. Nelms,
William L. Shaw,
Will Bassett,
Sorin Bastea,
Lisa M. Lauderbach,
Ralph L. Hodgin,
Nicholas A. Perez-Marty,
Saransh Singh,
Pinaki Das,
Yuelin Li,
Adam Schuman,
Nicholas Sinclair,
Kamel Fezzaa,
Alex Deriy,
Lara D. Leininger,
Trevor M. Willey
Abstract:
We explore the structural evolution of highly oriented pyrolytic graphite (HOPG) under detonation-induced shock conditions using in-situ synchrotron X-ray diffraction in the ns time scale. We observe the formation of hexagonal diamond (lonsdaleite) at pressures above 50 GPa, in qualitative agreement with recent gas gun experiments. First-principles density functional calculations reveal that under…
▽ More
We explore the structural evolution of highly oriented pyrolytic graphite (HOPG) under detonation-induced shock conditions using in-situ synchrotron X-ray diffraction in the ns time scale. We observe the formation of hexagonal diamond (lonsdaleite) at pressures above 50 GPa, in qualitative agreement with recent gas gun experiments. First-principles density functional calculations reveal that under uniaxial compression the energy barrier for the transition towards hexagonal diamond is lower than cubic diamond. Finally, no indication of cubic diamond formation was observed up to >70 GPa.
△ Less
Submitted 22 July, 2020;
originally announced July 2020.
-
Boiling transitions during droplet contact on superheated nano/micro-structured surfaces
Authors:
Navid Saneie,
Varun Kulkarni,
Kamel Fezzaa,
Neelesh Patankar,
Sushant Anand
Abstract:
Manipulating surface topography is one of the most promising strategies for increasing the efficiency of numerous industrial processes involving droplet contact with superheated surfaces. In such scenarios, the droplets may immediately boil upon contact, splash and boil, or could levitate on their own vapor in the Leidenfrost state. In this work, we report the outcomes of water droplets coming in…
▽ More
Manipulating surface topography is one of the most promising strategies for increasing the efficiency of numerous industrial processes involving droplet contact with superheated surfaces. In such scenarios, the droplets may immediately boil upon contact, splash and boil, or could levitate on their own vapor in the Leidenfrost state. In this work, we report the outcomes of water droplets coming in gentle contact with designed nano/micro-textured surfaces at a wide range of temperatures as observed using high-speed optical and X-ray imaging. We report a paradoxical increase in the Leidenfrost temperature (TLFP) as the texture spacing is reduced below a critical value (~10 um). Although droplets on such textured solids appear to boil upon contact, our studies suggest that their behavior is dominated by hydrodynamic instabilities implying that the increase in TLFP may not necessarily lead to enhanced heat transfer. On such surfaces, the droplets display a new regime characterized by splashing accompanied by a vapor jet penetrating through the droplets before they transition to the Leidenfrost state. We provide a comprehensive map of boiling behavior of droplets over a wide range of texture spacings that may have significant implications towards applications such as electronics cooling, spray cooling, nuclear reactor safety and containment of fire calamities.
△ Less
Submitted 24 March, 2020;
originally announced March 2020.
-
Drop Impact on Hot Plates: Contact times, Lift-off and the Lamella Rupture
Authors:
Sang-Hyeon Lee,
Kirsten Harth,
Maaike Rump,
Minwoo Kim,
Detlef Lohse,
Kamel Fezzaa,
Jung Ho Je
Abstract:
When a liquid drop impacts on a heated substrate, it can remain deposited, or violently boil in contact, or lift off with or without ever touching the surface. The latter is known as the Leidenfrost effect. The duration and area of the liquid--substrate contact is highly relevant for the heat transfer, as well as other effects such as corrosion. However, most experimental studies rely on side view…
▽ More
When a liquid drop impacts on a heated substrate, it can remain deposited, or violently boil in contact, or lift off with or without ever touching the surface. The latter is known as the Leidenfrost effect. The duration and area of the liquid--substrate contact is highly relevant for the heat transfer, as well as other effects such as corrosion. However, most experimental studies rely on side view imaging to determine contact times, and those are often mixed with the time until the drop lifts off from the substrate. Here, we develop and validate a reliable method of contact time determination using high-speed X-ray and Total Internal Reflection measurements. We exemplarily compare contact and lift-off times on flat silicon and sapphire substrates. We show that drops can rebound even without formation of a complete vapor layer, with a wide range of lift-off times. On sapphire, we find a local minimum of lift-off times much shorter than by capillary rebound in the comparatively low-temperature regime of transition boiling / thermal atomization. We elucidate the underlying mechanism related to spontaneous rupture of the lamella and receding of the contact area.
△ Less
Submitted 14 July, 2020; v1 submitted 16 March, 2020;
originally announced March 2020.
-
X-ray tomography of extended objects: a comparison of data acquisition approaches
Authors:
Ming Du,
Rafael Vescovi,
Kamel Fezzaa,
Chris Jacobsen,
Doga Gursoy
Abstract:
The penetration power of x-rays allows one to image large objects. For example, centimeter-sized specimens can be imaged with micron-level resolution using synchrotron sources. In this case, however, the limited beam diameter and detector size preclude the acquisition of the full sample in a single take, necessitating strategies for combining data from multiple regions. Object stitching involves t…
▽ More
The penetration power of x-rays allows one to image large objects. For example, centimeter-sized specimens can be imaged with micron-level resolution using synchrotron sources. In this case, however, the limited beam diameter and detector size preclude the acquisition of the full sample in a single take, necessitating strategies for combining data from multiple regions. Object stitching involves the combination of local tomography data from overlap** regions, while projection stitching involves the collection of projections at multiple offset positions from the rotation axis followed by data merging and reconstruction. We compare these two approaches in terms of radiation dose applied to the specimen, and reconstructed image quality. Object stitching involves an easier data alignment problem, and immediate viewing of subregions before the entire dataset has been acquired. Projection stitching is more dose-efficient, and avoids certain artifacts of local tomography; however, it also involves a more difficult data assembly and alignment procedure, in that it is more sensitive to accumulative registration error.
△ Less
Submitted 11 July, 2018; v1 submitted 24 May, 2018;
originally announced May 2018.
-
Short time dynamics of water coalescence on a flat water pool
Authors:
Su ** Lim,
Bopil Gim,
Kamel Fezzaa,
Byung Mook Weon
Abstract:
Coalescence is an important hydrodynamic event that frequently takes place in nature as well as in industry. Here we provide an experimental study on short time dynamics of water coalescence, particularly when a water droplet comes in contact with a flat water surface, by utilizing high-resolution high-penetration ultrafast X-ray microscopy. Our results demonstrate a possibility that an extreme cu…
▽ More
Coalescence is an important hydrodynamic event that frequently takes place in nature as well as in industry. Here we provide an experimental study on short time dynamics of water coalescence, particularly when a water droplet comes in contact with a flat water surface, by utilizing high-resolution high-penetration ultrafast X-ray microscopy. Our results demonstrate a possibility that an extreme curvature difference between a drop and a flat surface can significantly modify the hydrodynamics of water coalescence, which is unexpected in the existing theory. We suggest a plausible explanation for why coalescence can be modified by an extreme curvature difference.
△ Less
Submitted 14 April, 2016;
originally announced April 2016.
-
Quantifying mesoscale neuroanatomy using X-ray microtomography
Authors:
Eva L. Dyer,
William Gray Roncal,
Hugo L. Fernandes,
Doga Gürsoy,
Vincent De Andrade,
Rafael Vescovi,
Kamel Fezzaa,
Xianghui Xiao,
Joshua T. Vogelstein,
Chris Jacobsen,
Konrad P. Körding,
Narayanan Kasthuri
Abstract:
Methods for resolving the 3D microstructure of the brain typically start by thinly slicing and staining the brain, and then imaging each individual section with visible light photons or electrons. In contrast, X-rays can be used to image thick samples, providing a rapid approach for producing large 3D brain maps without sectioning. Here we demonstrate the use of synchrotron X-ray microtomography (…
▽ More
Methods for resolving the 3D microstructure of the brain typically start by thinly slicing and staining the brain, and then imaging each individual section with visible light photons or electrons. In contrast, X-rays can be used to image thick samples, providing a rapid approach for producing large 3D brain maps without sectioning. Here we demonstrate the use of synchrotron X-ray microtomography ($μ$CT) for producing mesoscale $(1~μm^3)$ resolution brain maps from millimeter-scale volumes of mouse brain. We introduce a pipeline for $μ$CT-based brain map** that combines methods for sample preparation, imaging, automated segmentation of image volumes into cells and blood vessels, and statistical analysis of the resulting brain structures. Our results demonstrate that X-ray tomography promises rapid quantification of large brain volumes, complementing other brain map** and connectomics efforts.
△ Less
Submitted 26 July, 2016; v1 submitted 12 April, 2016;
originally announced April 2016.
-
The structural origin of the hard-sphere glass transition in granular packing
Authors:
Chengjie Xia,
**dong Li,
Yixin Cao,
Binquan Kou,
Xinaghui Xiao,
Kamel Fezzaa,
Tiqiao Xiao,
Yujie Wang
Abstract:
Glass transition is accompanied by a rapid growth of the structural relaxation time and a concomitant decrease of configurational entropy. It remains unclear whether the transition has a thermodynamic origin, and whether the dynamic arrest is associated with the growth of a certain static order. Using granular packing as a model hard-sphere glass, we show the glass transition as a thermodynamic ph…
▽ More
Glass transition is accompanied by a rapid growth of the structural relaxation time and a concomitant decrease of configurational entropy. It remains unclear whether the transition has a thermodynamic origin, and whether the dynamic arrest is associated with the growth of a certain static order. Using granular packing as a model hard-sphere glass, we show the glass transition as a thermodynamic phase transition with a "hidden" polytetrahedral order. This polytetrahedral order is spatially correlated with the slow dynamics. It is geometrically frustrated and has a peculiar fractal dimension. Additionally, as the packing fraction increases, its growth follows an entropy-driven nucleation process, similar to that of the random first-order transition theory. Our study essentially identifies a long-sought-after structural glass order in hard-sphere glasses.
△ Less
Submitted 29 September, 2015;
originally announced September 2015.
-
Dynamic synchrotron X-ray imaging study of effective temperature in a vibrated granular medium
Authors:
Yixin Cao,
Xiaodan Zhang,
Binquan Kou,
Xiangting Li,
Xianghui Xiao,
Kamel Fezzaa,
Yujie Wang
Abstract:
We present a dynamic synchrotron X-ray imaging study of the effective temperature $T_{eff}$ in a vibrated granular medium. By tracking the directed motion and the fluctuation dynamics of the tracers inside, we obtained $T_{eff}$ of the system using Einstein relation. We found that as the system unjams with increasing vibration intensities $Γ$, the structural relaxation time $τ$ increases substanti…
▽ More
We present a dynamic synchrotron X-ray imaging study of the effective temperature $T_{eff}$ in a vibrated granular medium. By tracking the directed motion and the fluctuation dynamics of the tracers inside, we obtained $T_{eff}$ of the system using Einstein relation. We found that as the system unjams with increasing vibration intensities $Γ$, the structural relaxation time $τ$ increases substantially which can be fitted by an Arrhenius law using $T_{eff}$. And the characteristic energy scale of structural relaxation yielded by the Arrhenius fitting is $E = 0.21 \pm 0.02$ $pd^3$, where $p$ is the pressure and $d$ is the background particle diameter, which is consistent with those from hard sphere simulations in which the structural relaxation happens via the opening up of free volume against pressure.
△ Less
Submitted 21 March, 2014; v1 submitted 6 December, 2013;
originally announced December 2013.
-
Vibration and Nonlinear Resonance in the Break-up of an Underwater Bubble
Authors:
Lipeng Lai,
Nathan C. Keim,
Kamel Fezzaa,
Wendy W. Zhang,
Sidney R. Nagel
Abstract:
We use high-speed X-ray phase-contrast imaging, weakly nonlinear analysis and boundary integral simulations to characterize the final stage of underwater bubble break-up. The X-ray imaging study shows that an initial azimuthal perturbation to the shape of the bubble neck gives rise to oscillations that increasingly distort the cross-section shape. These oscillations terminate in a pinch-off where…
▽ More
We use high-speed X-ray phase-contrast imaging, weakly nonlinear analysis and boundary integral simulations to characterize the final stage of underwater bubble break-up. The X-ray imaging study shows that an initial azimuthal perturbation to the shape of the bubble neck gives rise to oscillations that increasingly distort the cross-section shape. These oscillations terminate in a pinch-off where the bubble surface develops concave regions that contact similar to what occurs when two liquid drops coalesce. We also present a weakly nonlinear analysis that shows that this coalescence-like mode of pinch-off occurs when the initial shape oscillation interferes constructively with the higher harmonics it generates and thus reinforce each other's effects in bringing about bubble break-up. Finally we present numerical results that confirm the weakly nonlinear analysis scenario as well as provide insight into observed shape reversals. They demonstrate that when the oscillations interfere destructively, a qualitatively different mode of pinch-off results where the cross-section profile of the bubble neck develops sharply-curved regions.
△ Less
Submitted 24 July, 2013;
originally announced July 2013.
-
Gas gun shock experiments with single-pulse x-ray phase contrast imaging and diffraction at the Advanced Photon Source
Authors:
S. N. Luo,
B. J. Jensen,
D. E. Hooks,
K. Fezzaa,
K. J. Ramos,
J. D. Yeager,
K. Kwiatkowski,
1,
T. Shimada
Abstract:
The highly transient nature of shock loading and pronounced microstructure effects on dynamic materials response call for {\it in situ}, temporally and spatially resolved, x-ray-based diagnostics. Third-generation synchrotron x-ray sources are advantageous for x-ray phase contrast imaging (PCI) and diffraction under dynamic loading, due to their high photon energy, high photon fluxes, high coheren…
▽ More
The highly transient nature of shock loading and pronounced microstructure effects on dynamic materials response call for {\it in situ}, temporally and spatially resolved, x-ray-based diagnostics. Third-generation synchrotron x-ray sources are advantageous for x-ray phase contrast imaging (PCI) and diffraction under dynamic loading, due to their high photon energy, high photon fluxes, high coherency, and high pulse repetition rates. The feasibility of bulk-scale gas gun shock experiments with dynamic x-ray PCI and diffraction measurements was investigated at the beamline 32ID-B of the Advanced Photon Source. The x-ray beam characteristics, experimental setup, x-ray diagnostics, and static and dynamic test results are described. We demonstrate ultrafast, multiframe, single-pulse PCI measurements with unprecedented temporal ($<$100 ps) and spatial ($\sim$2 $μ$m) resolutions for bulk-scale shock experiments, as well as single-pulse dynamic Laue diffraction. The results not only substantiate the potential of synchrotron-based experiments for addressing a variety of shock physics problems, but also allow us to identify the technical challenges related to image detection, x-ray source, and dynamic loading.
△ Less
Submitted 26 April, 2012;
originally announced April 2012.
-
Similarity between the primary and secondary air-assisted liquid jet breakup mechanism
Authors:
Y. J. Wang,
Kyoung-Su Im,
K. Fezzaa
Abstract:
we report an ultrafast synchrotron x-ray phase contrast imaging study of the primary breakup mechanism of a coaxial air-assisted water jet. We demonstrate that there exist great similarities in the phenomenology of primary breakup with that of the secondary breakup. Especially, a membrane-mediated breakup mechanism dominates the breakup process for a wide range of air speeds. This finding reveal…
▽ More
we report an ultrafast synchrotron x-ray phase contrast imaging study of the primary breakup mechanism of a coaxial air-assisted water jet. We demonstrate that there exist great similarities in the phenomenology of primary breakup with that of the secondary breakup. Especially, a membrane-mediated breakup mechanism dominates the breakup process for a wide range of air speeds. This finding reveals the intrinsic connections of these two breakup regimes and has deep implications on the unified theoretical approach in treating the breakup mechanism of high speed liquid jet.
△ Less
Submitted 31 May, 2007;
originally announced June 2007.