-
Solid-state heating using the multicaloric effect in multiferroics
Authors:
Melvin M. Vopson,
Yuri K. Fetisov,
Ian Hepburn
Abstract:
The multicaloric effect is defined as the adiabatic temperature change in multiferroic materials induced by the application of an external electric or magnetic field, and it was first proposed in 2012. The multicaloric effects in multiferroics, as well as other similar caloric effects in single-ferroics, have been the focus of much research due to their potential commercialization in solid-state r…
▽ More
The multicaloric effect is defined as the adiabatic temperature change in multiferroic materials induced by the application of an external electric or magnetic field, and it was first proposed in 2012. The multicaloric effects in multiferroics, as well as other similar caloric effects in single-ferroics, have been the focus of much research due to their potential commercialization in solid-state refrigeration. In this short communication ar-ticle we examine the thermodynamics of the multicaloric effect for solid-state heating applications. A possible thermodynamic multicaloric heating cycle is proposed, and then implemented to estimate the solid-state heating effect for a known electrocaloric system. This work offers a path to the implementation of caloric and multicaloric effects to effi-cient heating systems and we offer a theoretical estimate of the upper limit of the tem-perature change achievable in a multicaloric cooling or heating effect.
△ Less
Submitted 29 November, 2021;
originally announced January 2022.
-
Magnetoelectric Interactions in Layered Composites of Piezoelectric Quartz and Magnetostrictive Alloys
Authors:
G. Sreenivasulu,
V. M. Petrov,
L. Y. Fetisov,
Y. K. Fetisov,
G. Srinivasan
Abstract:
Mechanical strain mediated magnetoelectric effects are studied in bilayers and trilayers of piezoelectric quartz and magnetostrictive permendur (P), an alloy of Fe-Co-V. It is shown that the magneto-electric voltage coefficient (MEVC), proportional to the ratio of the piezoelectric coupling coefficient to the permittivity, is higher in quart-based composites than for traditional ferroelectrics bas…
▽ More
Mechanical strain mediated magnetoelectric effects are studied in bilayers and trilayers of piezoelectric quartz and magnetostrictive permendur (P), an alloy of Fe-Co-V. It is shown that the magneto-electric voltage coefficient (MEVC), proportional to the ratio of the piezoelectric coupling coefficient to the permittivity, is higher in quart-based composites than for traditional ferroelectrics based ME composites. In bilayers of X-cut single crystal quartz and permendur, the MEVC varies from 1.5 V/cm Oe at 20 Hz to ~ 185 V/cm Oe at bending resonance or electromechanical resonance corresponding to longitudinal acoustic modes. In symmetric quartz-P trilayers, the MEVC ~ 4.8 V/cm Oe at 20 Hz and ~ 175 V/cm Oe at longitudinal acoustic resonance. A model for low-frequency and resonance ME effects is provided for theoretical estimates of MEVC and calculated MEVC are in general agreement with measured values. Magneto-electric composites with quartz have the desired characteristics such as the absence of ferroelectric hysteresis and pyroelectric losses and could potentially replace ferroelectrics in composite-based magnetic sensors, transducers and high frequency devices.
△ Less
Submitted 24 November, 2012; v1 submitted 14 July, 2012;
originally announced July 2012.
-
Dielectric and Pyroelectric Properties of Thick Film Ferromagnetic - Piezoelectric Structures
Authors:
Y. K. Fetisov,
A. A. Bush,
K. E. Kamentsev,
G. Srinivasan
Abstract:
Layered ferromagnetic-piezoelectric composites show mechanical strain mediated electromagnetic coupling. Here we discuss dielectric and piezoelectric properties of ferrite-lead zirconate titanate (PZT) and lanthanum manganite-PZT samples. Results of our investigations on dielectric and pyroelectric properties of multilayer ferromagnetic-piezoelectric are presented here. Lead zircinate-titanate P…
▽ More
Layered ferromagnetic-piezoelectric composites show mechanical strain mediated electromagnetic coupling. Here we discuss dielectric and piezoelectric properties of ferrite-lead zirconate titanate (PZT) and lanthanum manganite-PZT samples. Results of our investigations on dielectric and pyroelectric properties of multilayer ferromagnetic-piezoelectric are presented here. Lead zircinate-titanate PbZrxTi1-xO3 (PZT) was used for the piezoelectric phase in all the structures. The following materials were used for the ferromagnetic component: nickel-zinc ferrites Ni0.9Zn 0.1Fe2O4 (NFO1) and Ni0.8Zn0.2Fe2O4 (NFO2), cobalt ferrite (CFO), lithium ferrite (LFO), lanthanum strontium manganite La0.7Sr0.3MnO3 (LSM), and lanthanum-calcium manganite La0.7Ca0.3MnO3 (LCM). The pyroelectric effect was studied by measuring the current J flowing through a closed loop containing the sample and an electrometer as the sample temperature T was slowly varied at the rate 0.1 K/s. Polarized PZT layers generate a pyroelectric current as the temperature changes. The main indicator of pyroelectric nature of the current is the sign reversal when the thermal cycle is switched from heating to cooling. Almost all of the multilayer structures showed a pyroelectric current, but the pyroelectric coefficient varied in a wide range. (i) For NFO1-PZT system the coefficient was in the range 0.01 - 10 nC/(cm2 K), depending on the temperature. (ii) CFO-PZT and LFO-PZT structures showed a large thermal current and a weak pyroelectric effect. (iii) Thermal currents, however, were absent in LCM-PZT within the temperature range from the room temperature to 400 K. (iv) In LSM-PZT, the thermal current exceeded the pyroelectric current. A model is proposed for an understanding of these results.
△ Less
Submitted 24 January, 2004;
originally announced January 2004.
-
Structural and magnetoelectric properties of MFe2O4-PZT (M=Ni,Co) and (La)x(Ca,Sr)1-x - PZT multilayers
Authors:
G. Srinivasan,
E. T. Rasmussen,
A. A. Bush,
K. E. Kamentsev,
V. F. Meshcheryakov,
Y. K. Fetisov
Abstract:
Thick film layered magnetoelectric composites consisting of ferromagnetic and ferroelectric phases have been synthesized with nickel ferrite (NFO), cobalt ferrite (CFO), La0.7Sr0.3MnO3 (LSMO), or La0.7Ca0.3MnO3 (LCMO) and lead zirconate titanate (PZT). Structural, magnetic and ferromagnetic resonance characterization shows evidence for defect free ferrites, but deterioration of manganite paramet…
▽ More
Thick film layered magnetoelectric composites consisting of ferromagnetic and ferroelectric phases have been synthesized with nickel ferrite (NFO), cobalt ferrite (CFO), La0.7Sr0.3MnO3 (LSMO), or La0.7Ca0.3MnO3 (LCMO) and lead zirconate titanate (PZT). Structural, magnetic and ferromagnetic resonance characterization shows evidence for defect free ferrites, but deterioration of manganite parameters. The resistivity and dielectric constants are smaller than expected values. The magnetoelectric effect (ME) is stronger in ferrite-PZT than in manganite-PZT. The ME voltage coefficient aE at room temperature is the highest in NFO-PZT and the smallest for LCMO-PZT. The transverse ME effect is an order of magnitude stronger than the longitudinal effect. The magnitude of aE correlates well with magnetic permeability for the ferrites.
△ Less
Submitted 13 July, 2003;
originally announced July 2003.
-
Magnetic and microwave properties of (Ni,Co)Fe2O4-ferroelectric and (La,Ca,Sr)MnO3-ferroelectric multilayer structures
Authors:
A. A. Bush,
Y. K. Fetisov,
K. E. Kamentsev,
V. F. Meshcheryakov,
G. Srinivasan
Abstract:
Structural, magnetic and ferromagnetic resonance characterization studies have been performed on lay-ered ferromagnetic-ferroelectric oxides that show strong magnetoelectric coupling. The samples contained thick films of ferrites or substituted lanthanum manganites for the ferromagnetic phase and lead zirconate titanate for the ferroelectric phase, and were sintered high temperatures. Results in…
▽ More
Structural, magnetic and ferromagnetic resonance characterization studies have been performed on lay-ered ferromagnetic-ferroelectric oxides that show strong magnetoelectric coupling. The samples contained thick films of ferrites or substituted lanthanum manganites for the ferromagnetic phase and lead zirconate titanate for the ferroelectric phase, and were sintered high temperatures. Results indicate defect free ferrites, but deterioration of manganite parameters due to diffusion at the interface and accounts for poor magnetoelectric coupling in manganite-PZT samples.
△ Less
Submitted 12 July, 2003;
originally announced July 2003.
