-
Luttinger surface dominance and Fermi liquid behaviour of topological Kondo insulators SmB$_6$ and YbB$_{12}$
Authors:
Andrea Blason,
Ivan Pasqua,
Michel Ferrero,
Michele Fabrizio
Abstract:
Defying the traditional classification into metals and insulators, several materials simultaneously display metallic thermal properties and insulating electric behaviour, as if they hosted quasiparticles carrying entropy but not charge. Among them, some materials also possess quantum oscillations in magnetic fields as if they had well-defined Fermi surfaces despite the insulating gap. This remarka…
▽ More
Defying the traditional classification into metals and insulators, several materials simultaneously display metallic thermal properties and insulating electric behaviour, as if they hosted quasiparticles carrying entropy but not charge. Among them, some materials also possess quantum oscillations in magnetic fields as if they had well-defined Fermi surfaces despite the insulating gap. This remarkable dichotomy has been observed in the topological Kondo insulators SmB$_6$ and YbB$_{12}$. Prompted by the peculiar mixed-valence nature of these compounds, involving $f$ and $d$ electrons of the lanthanide, we propose an explanation of their intriguing properties drawing inspiration from the physics of the pseudogap phase in underdoped cuprates. We argue that the $f$ and $d$ subsystems, when considered separately, act, respectively, as electron- and hole-doped Mott insulators, featuring Fermi pockets coexisting with Luttinger surfaces responsible for the pseudogap. When the two are coupled to each other a hybridisation gap opens up, and the whole turns into a topological insulator endowed with genuine chiral edge states. However, the Luttinger surfaces persist and support neutral quasiparticles. This scenario, supported by numerical simulations within the dynamical cluster approximation, effectively resolves the paradoxical phenomenology of SmB$_6$ and YbB$_{12}$.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Effective quantum dynamics for magnetic fermions
Authors:
Margherita Ferrero,
Domenico Monaco
Abstract:
We show how to derive an effective nonlinear dynamics, described by the Hartree-Fock equations, for fermionic quantum particles confined to a two-dimensional box and in presence of an external, uniform magnetic field. The derivation invokes the Dirac-Frenkel principle. We discuss the validity of this effective description with respect to the many-body Schrödinger dynamics for small times and for w…
▽ More
We show how to derive an effective nonlinear dynamics, described by the Hartree-Fock equations, for fermionic quantum particles confined to a two-dimensional box and in presence of an external, uniform magnetic field. The derivation invokes the Dirac-Frenkel principle. We discuss the validity of this effective description with respect to the many-body Schrödinger dynamics for small times and for weak interactions, and also in regards to the number of particles.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Compact fermionic quantum state preparation with a natural-orbitalizing variational quantum eigensolving scheme
Authors:
Pauline Besserve,
Michel Ferrero,
Thomas Ayral
Abstract:
Assemblies of strongly interacting fermions, whether in a condensed-matter or a quantum chemistry context, range amongst the most promising candidate systems for which quantum computing platforms could provide an advantage. Near-term quantum state preparation is typically realized by means of the variational quantum eigensolver (VQE) algorithm. One of the main challenges to a successful implementa…
▽ More
Assemblies of strongly interacting fermions, whether in a condensed-matter or a quantum chemistry context, range amongst the most promising candidate systems for which quantum computing platforms could provide an advantage. Near-term quantum state preparation is typically realized by means of the variational quantum eigensolver (VQE) algorithm. One of the main challenges to a successful implementation of VQE lies in the sensitivity to noise exhibited by deep variational circuits. On the other hand, sufficient depth must be allowed to be able to reach a good approximation to the target state. In this work, we present a refined VQE scheme that consists in top** VQE with state-informed updates of the elementary fermionic modes (spin-orbitals). These updates consist in moving to the natural-orbital basis of the current, converged variational state, a basis we argue eases the task of state preparation. We test the method on the Hubbard model in the presence of experimentally relevant noise levels. For a fixed circuit structure, the method is shown to enhance the capabilities of the circuit to reach a state close to the target state without incurring too much overhead from shot noise. Moreover, coupled with an adaptive VQE scheme that constructs the circuit on the fly, we evidence reduced requirements on the depth of the circuit as the orbitals get updated.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Interaction-enhanced nesting in Spin-Fermion and Fermi-Hubbard models
Authors:
R. Rossi,
F. Simkovic IV,
M. Ferrero,
A. Georges,
A. M. Tsvelik,
N. V. Prokof'ev,
I. S. Tupitsyn
Abstract:
The spin-fermion (SF) model postulates that the dominant coupling between low-energy fermions in near critical metals is mediated by collective spin fluctuations (paramagnons) peaked at the Néel wave vector, ${\bf Q}_N$, connecting hot spots on opposite sides of the Fermi surface. It has been argued that strong correlations at hot spots lead to a Fermi surface deformation (FSD) featuring flat regi…
▽ More
The spin-fermion (SF) model postulates that the dominant coupling between low-energy fermions in near critical metals is mediated by collective spin fluctuations (paramagnons) peaked at the Néel wave vector, ${\bf Q}_N$, connecting hot spots on opposite sides of the Fermi surface. It has been argued that strong correlations at hot spots lead to a Fermi surface deformation (FSD) featuring flat regions and increased nesting. This conjecture was confirmed in the perturbative self-consistent calculations when the paramagnon propagator dependence on momentum deviation from ${\bf Q}_N$ is given by $χ^{-1} \propto |Δq|$. Using diagrammatic Monte Carlo (diagMC) technique we show that such a dependence holds only at temperatures orders of magnitude smaller than any other energy scale in the problem, indicating that a different mechanism may be at play. Instead, we find that a $χ^{-1} \propto |Δq|^{2}$ dependence yields a robust finite-$T$ scenario for achieving FSD. To link phenomenological and microscopic descriptions, we applied the connected determinant diagMC method to the $(t-t')$ Hubbard model and found that in this case: (i) the FSD is not very pronounced, and, instead, it is the lines of zeros of the renormalized dispersion relation that deform towards nesting; (ii) this phenomenon appears at large $U/t>5.5$ before the formation of electron and hole pockets; (iii) the static spin susceptibility is well described by $χ^{-1} \propto |Δq|^{2}$. Flat FS regions yield a non-trivial scenario for realizing a non-Fermi liquid state.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
-
Efficiency of neural quantum states in light of the quantum geometric tensor
Authors:
Sidhartha Dash,
Filippo Vicentini,
Michel Ferrero,
Antoine Georges
Abstract:
Neural quantum state (NQS) ansätze have shown promise in variational Monte Carlo algorithms by their theoretical capability of representing any quantum state. However, the reason behind the practical improvement in their performance with an increase in the number of parameters is not fully understood. In this work, we systematically study the efficiency of restricted Boltzmann Machines (RBMs) to r…
▽ More
Neural quantum state (NQS) ansätze have shown promise in variational Monte Carlo algorithms by their theoretical capability of representing any quantum state. However, the reason behind the practical improvement in their performance with an increase in the number of parameters is not fully understood. In this work, we systematically study the efficiency of restricted Boltzmann Machines (RBMs) to represent the ground states in different phases of the spin-1 bilinear-biquadratic model, as the hidden layer density $α$ increases. We train our ansatz by minimizing two different loss functions: 1) energy, and 2) infidelity of the NQS ansatz w.r.t. that of the exact ground state. We observe that the accuracy of our ansatz saturates with $α$ in both cases. We demonstrate that this can be explained by looking at the spectrum of the quantum geometric tensor (QGT). We find that the rank of the QGT saturates beyond a certain $α$, and we emphasize that it corresponds to the \textit{dimension of the relevant manifold} for an optimized NQS. This provides a useful diagnostics for the practical representation power of an NQS ansatz.
△ Less
Submitted 3 March, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
First test beam measurement of the 4D resolution of an RSD 450 microns pitch pixel matrix connected to a FAST2 ASIC
Authors:
L. Menzio,
F. Siviero,
R. Arcidiacono,
N. Cartiglia,
M. Costa,
T. Croci,
M. Ferrero,
C. Hanna,
L. Lanteri,
S. Mazza,
R. Mulargiaa,
H-F W. Sadrozinski,
A. Seiden,
V. Sola,
R. Whitea,
M. Wilder
Abstract:
This paper reports on the spatial and temporal resolutions of an RSD 450 microns pitch pixels array measured at the DESY test beam facility. RSDs, Resistive Silicon Detectors, also known as AC-LGAD, achieve excellent position and temporal resolution by exploiting charge sharing among neighboring electrodes. The RSD matrix used in this study is part of the second FBK RSD production, RSD2, and it is…
▽ More
This paper reports on the spatial and temporal resolutions of an RSD 450 microns pitch pixels array measured at the DESY test beam facility. RSDs, Resistive Silicon Detectors, also known as AC-LGAD, achieve excellent position and temporal resolution by exploiting charge sharing among neighboring electrodes. The RSD matrix used in this study is part of the second FBK RSD production, RSD2, and it is composed of 450 microns pitch pixel with cross-shaped electrodes. A 7-pixel matrix was read out by the FAST2 ASIC, a 16-channel amplifier fully custom ASIC developed by INFN Torino using the 110 nm CMOS technology. The total area covered by the matrix is about 1.5 mm$^2$. The position resolution reached in this test is 15 microns, about 4\% of the pitch. The temporal resolution achieved in this work is 60 ps, dominated by the FAST2 resolution. The work also demonstrates that RSD sensors with cross-shaped electrodes achieve 100% fill factor and homogenous resolutions over the whole matrix surface, making them a suitable choice for 4D tracking applications.
△ Less
Submitted 17 February, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
Superconductivity and Mottness in Organic Charge Transfer Materials
Authors:
Henri Menke,
Marcel Klett,
Kazushi Kanoda,
Antoine Georges,
Michel Ferrero,
Thomas Schäfer
Abstract:
The phase diagrams of quasi two-dimensional organic superconductors display a plethora of fundamental phenomena associated with strong electron correlations, such as unconventional superconductivity, metal-insulator transitions, frustrated magnetism and spin liquid behavior. We analyze a minimal model for these compounds, the Hubbard model on an anisotropic triangular lattice, using cutting-edge q…
▽ More
The phase diagrams of quasi two-dimensional organic superconductors display a plethora of fundamental phenomena associated with strong electron correlations, such as unconventional superconductivity, metal-insulator transitions, frustrated magnetism and spin liquid behavior. We analyze a minimal model for these compounds, the Hubbard model on an anisotropic triangular lattice, using cutting-edge quantum embedding methods respecting the lattice symmetry. We demonstrate the existence of unconventional superconductivity by directly entering the symmetry-broken phase. We show that the crossover from the Fermi liquid metal to the Mott insulator is associated with the formation of a pseudogap. The predicted momentum-selective destruction of the Fermi surface into hot and cold regions provides motivation for further spectroscopic studies. Our results are in remarkable agreement with experimental phase diagrams of $κ$-BEDT organics.
△ Less
Submitted 27 February, 2024; v1 submitted 19 January, 2024;
originally announced January 2024.
-
Livestock feeding behaviour: A review on automated systems for ruminant monitoring
Authors:
José Chelotti,
Luciano Martinez-Rau,
Mariano Ferrero,
Leandro Vignolo,
Julio Galli,
Alejandra Planisich,
H. Leonardo Rufiner,
Leonardo Giovanini
Abstract:
Livestock feeding behaviour is an influential research area for those involved in animal husbandry and agriculture. In recent years, there has been a growing interest in automated systems for monitoring the behaviour of ruminants. Despite the developments accomplished in the last decade, there is still much to do and learn about the methods for measuring and analysing livestock feeding behaviour.…
▽ More
Livestock feeding behaviour is an influential research area for those involved in animal husbandry and agriculture. In recent years, there has been a growing interest in automated systems for monitoring the behaviour of ruminants. Despite the developments accomplished in the last decade, there is still much to do and learn about the methods for measuring and analysing livestock feeding behaviour. Automated monitoring systems mainly use motion, acoustic, and image sensors to collect animal behavioural data. The performance evaluation of existing methods is a complex task and direct comparisons between studies are difficult. Several factors prevent a direct comparison, starting from the diversity of data and performance metrics used in the experiments. To the best of our knowledge, this work represents the first tutorial-style review on the analysis of the feeding behaviour of ruminants, emphasising the relationship between sensing methodologies, signal processing, and computational intelligence methods. It assesses the main sensing methodologies (i.e. based on movement, sound, images/videos, and pressure) and the main techniques to measure and analyse the signals associated with feeding behaviour, evaluating their use in different settings and situations. It also highlights the potentiality of automated monitoring systems to provide valuable information that improves our understanding of livestock feeding behaviour. The relevance of these systems is increasingly important due to their impact on production systems and research. Finally, the paper closes by discussing future challenges and opportunities in livestock feeding behaviour monitoring.
△ Less
Submitted 2 July, 2024; v1 submitted 3 December, 2023;
originally announced December 2023.
-
Simple predictors of $T_c$ in superconducting cuprates and the role of interactions between effective Wannier orbitals in the $d-p$ 3-band model
Authors:
Jaksa Vucicevic,
Michel Ferrero
Abstract:
At optimal do**, different cuprate compounds can exhibit vastly different critical temperatures for superconductivity ($T_c$), ranging from about 20 K to about 135 K. The precise properties of the lattice that determine the magnitude of the $T_c$ are currently unknown. In this paper, we investigate the dependence of the optimal do** $T_c$ on the parameters of the Emery ($d-p$) model for the Cu…
▽ More
At optimal do**, different cuprate compounds can exhibit vastly different critical temperatures for superconductivity ($T_c$), ranging from about 20 K to about 135 K. The precise properties of the lattice that determine the magnitude of the $T_c$ are currently unknown. In this paper, we investigate the dependence of the optimal do** $T_c$ on the parameters of the Emery ($d-p$) model for the CuO$_2$ planes in the cuprates. We show that the best scaling is obtained not with the parameters of the model written in the real ($d/p$-orbital) space, but rather written in the space of effective Wannier orbitals. In this basis, one obtains a model of three sublattices coupled through all possible 4-point interactions. We identify multiple predictor variables that fit the experimental $T_c$ to about $\pm4-5$ K and that remarkably depend on the leading attractive coupling constants in the transformed Hamiltonian.
△ Less
Submitted 2 February, 2024; v1 submitted 18 August, 2023;
originally announced August 2023.
-
A new Low Gain Avalanche Diode concept: the double-LGAD
Authors:
F. Carnesecchi,
S. Strazzi,
A. Alici,
R. Arcidiacono,
N. Cartiglia,
D. Cavazza,
S. Durando,
M. Ferrero,
A. Margotti,
L. Menzio,
R. Nania,
B. Sabiu,
G. Scioli,
F. Siviero,
V. Sola,
G. Vignola
Abstract:
This paper describes the new concept of the double-LGAD. The goal is to increase the charge at the input of the electronics, kee** a time resolution equal or better than a standard (single) LGAD; this has been realized by adding the charges of two coupled LGADs while still using a single front-end electronics. The study here reported has been done starting from single LGAD with a thickness of 25…
▽ More
This paper describes the new concept of the double-LGAD. The goal is to increase the charge at the input of the electronics, kee** a time resolution equal or better than a standard (single) LGAD; this has been realized by adding the charges of two coupled LGADs while still using a single front-end electronics. The study here reported has been done starting from single LGAD with a thickness of 25 \textmu{m}, 35 \textmu{m} and 50 \textmu{m}.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
A noise-robust acoustic method for recognizing foraging activities of grazing cattle
Authors:
Luciano S. Martinez-Rau,
José O. Chelotti,
Mariano Ferrero,
Julio R. Galli,
Santiago A. Utsumi,
Alejandra M. Planisich,
H. Leonardo Rufiner,
Leonardo L. Giovanini
Abstract:
Farmers must continuously improve their livestock production systems to remain competitive in the growing dairy market. Precision livestock farming technologies provide individualized monitoring of animals on commercial farms, optimizing livestock production. Continuous acoustic monitoring is a widely accepted sensing technique used to estimate the daily rumination and grazing time budget of free-…
▽ More
Farmers must continuously improve their livestock production systems to remain competitive in the growing dairy market. Precision livestock farming technologies provide individualized monitoring of animals on commercial farms, optimizing livestock production. Continuous acoustic monitoring is a widely accepted sensing technique used to estimate the daily rumination and grazing time budget of free-ranging cattle. However, typical environmental and natural noises on pastures noticeably affect the performance limiting the practical application of current acoustic methods. In this study, we present the operating principle and generalization capability of an acoustic method called Noise-Robust Foraging Activity Recognizer (NRFAR). The proposed method determines foraging activity bouts by analyzing fixed-length segments of identified jaw movement events produced during grazing and rumination. The additive noise robustness of the NRFAR was evaluated for several signal-to-noise ratios using stationary Gaussian white noise and four different nonstationary natural noise sources. In noiseless conditions, NRFAR reached an average balanced accuracy of 86.4%, outperforming two previous acoustic methods by more than 7.5%. Furthermore, NRFAR performed better than previous acoustic methods in 77 of 80 evaluated noisy scenarios (53 cases with p<0.05). NRFAR has been shown to be effective in harsh free-ranging environments and could be used as a reliable solution to improve pasture management and monitor the health and welfare of dairy cows. The instrumentation and computational algorithms presented in this publication are protected by a pending patent application: AR P20220100910. Web demo available at: https://sinc.unl.edu.ar/web-demo/nrfar
△ Less
Submitted 28 August, 2023; v1 submitted 28 April, 2023;
originally announced April 2023.
-
Magnetism and Metallicity in Moiré Transition Metal Dichalcogenides
Authors:
Patrick Tscheppe,
Jiawei Zang,
Marcel Klett,
Seher Karakuzu,
Armelle Celarier,
Zhengqian Cheng,
Chris A. Marianetti,
Thomas A. Maier,
Michel Ferrero,
Andrew J. Millis,
Thomas Schäfer
Abstract:
The ability to control the properties of twisted bilayer transition metal dichalcogenides in situ makes them an ideal platform for investigating the interplay of strong correlations and geometric frustration. Of particular interest are the low energy scales, which make it possible to experimentally access both temperature and magnetic fields that are of the order of the bandwidth or the correlatio…
▽ More
The ability to control the properties of twisted bilayer transition metal dichalcogenides in situ makes them an ideal platform for investigating the interplay of strong correlations and geometric frustration. Of particular interest are the low energy scales, which make it possible to experimentally access both temperature and magnetic fields that are of the order of the bandwidth or the correlation scale. In this manuscript we analyze the moiré Hubbard model, believed to describe the low energy physics of an important subclass of the twisted bilayer compounds. We establish its magnetic and the metal-insulator phase diagram for the full range of magnetic fields up to the fully spin polarized state. We find a rich phase diagram including fully and partially polarized insulating and metallic phases of which we determine the interplay of magnetic order, Zeeman-field, and metallicity, and make connection to recent experiments.
△ Less
Submitted 27 April, 2023; v1 submitted 23 March, 2023;
originally announced March 2023.
-
Resistive Read-out in Thin Silicon Sensors with Internal Gain
Authors:
N. Cartiglia,
F. Moscatelli,
R. Arcidiacono,
P. Asenov,
M. Costa,
T. Croci,
M. Ferrero,
A. Fondacci,
L. Lanteri,
L. Menzio,
A. Morozzi,
R. Mulargia,
D. Passeri,
F. Siviero,
V. Sola,
M. Tornago
Abstract:
Two design innovations, low-gain avalanche (Low-Gain Avalance Diode, LGAD) and resistive read-out (Resistive Silicon Detector, RSD), have brought strong performance improvements to silicon sensors. Large signals, due to the added gain mechanism, lead to improved temporal precision, while charge sharing, introduced by resistive read-out, allows for achieving excellent spatial resolution even with l…
▽ More
Two design innovations, low-gain avalanche (Low-Gain Avalance Diode, LGAD) and resistive read-out (Resistive Silicon Detector, RSD), have brought strong performance improvements to silicon sensors. Large signals, due to the added gain mechanism, lead to improved temporal precision, while charge sharing, introduced by resistive read-out, allows for achieving excellent spatial resolution even with large pixels. LGAD- and RSD- based silicon sensors are now adopted, or considered, in several future experiments and are the basis for almost every next 4D-trackers. New results obtained with sensors belonging to the second FBK production of RSD (RSD2) demonstrate how a combined resolution of 30 ps and 30 \microns can be obtained with pixels as large as $1 \times 1 $ mm$^2$.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
High-Precision 4D Tracking with Large Pixels using Thin Resistive Silicon Detectors
Authors:
R. Arcidiacono,
G. Borghi,
M. Boscardin,
N. Cartiglia,
M. Centis Vignali,
M. Costa,
G-F. Dalla Betta,
M. Ferrero,
F. Ficorella,
G. Gioachin,
L. Lanteri,
M. Mandurrino,
L. Menzio,
R. Mulargia,
L. Pancheri,
G. Paternoster,
A. Rojas,
H-F W. Sadrozinski,
A. Seiden,
F. Siviero,
V. Sola,
M. Tornago
Abstract:
The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the signals seen on the electrodes surrounding the impact point, achieve excellent space and time resolutions even with very large pixels. In this paper, a TCT system using a 1064 nm picosecond laser is used to characterize sen…
▽ More
The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the signals seen on the electrodes surrounding the impact point, achieve excellent space and time resolutions even with very large pixels. In this paper, a TCT system using a 1064 nm picosecond laser is used to characterize sensors from the second RSD production at the Fondazione Bruno Kessler. The paper first introduces the parametrization of the errors in the determination of the position and time coordinates in RSD, then outlines the reconstruction method, and finally presents the results. Three different pixel sizes are used in the analysis: 200 x 340, 450 x 450, and 1300 x 1300 microns^2. At gain = 30, the 450 x 450 microns^2 pixel achieves a time jitter of 20 ps and a spatial resolution of 15 microns concurrently, while the 1300 x 1300 microns^2 pixel achieves 30 ps and 30 micron, respectively. The implementation of cross-shaped electrodes improves considerably the response uniformity over the pixel surface.
△ Less
Submitted 24 November, 2022;
originally announced November 2022.
-
Symmetry-broken perturbation theory to large orders in antiferromagnetic phases
Authors:
R. Garioud,
F. Šimkovic IV,
R. Rossi,
G. Spada,
T. Schäfer,
F. Werner,
M. Ferrero
Abstract:
We introduce a spin-symmetry-broken extension of the connected determinant algorithm [Phys. Rev. Lett. 119, 045701 (2017)]. The resulting systematic perturbative expansions around an antiferromagnetic state allow for numerically exact calculations directly inside a magnetically ordered phase. We show new precise results for the magnetic phase diagram and thermodynamics of the three-dimensional cub…
▽ More
We introduce a spin-symmetry-broken extension of the connected determinant algorithm [Phys. Rev. Lett. 119, 045701 (2017)]. The resulting systematic perturbative expansions around an antiferromagnetic state allow for numerically exact calculations directly inside a magnetically ordered phase. We show new precise results for the magnetic phase diagram and thermodynamics of the three-dimensional cubic Hubbard model at half-filling. With detailed computations of the order parameter in the low to intermediate-coupling regime, we establish the N{é}el phase boundary. The critical behavior in its vicinity is shown to be compatible with the $O(3)$ Heisenberg universality class. By determining the evolution of the entropy with decreasing temperature through the phase transition we identify the different physical regimes at $U/t\!=\!4$. We provide quantitative results for several thermodynamic quantities deep inside the antiferromagnetic dome up to large interaction strengths and investigate the crossover between the Slater and Heisenberg regimes.
△ Less
Submitted 27 June, 2023; v1 submitted 31 October, 2022;
originally announced October 2022.
-
Origin and fate of the pseudogap in the doped Hubbard model
Authors:
Fedor Simkovic,
Riccardo Rossi,
Antoine Georges,
Michel Ferrero
Abstract:
We investigate the doped two-dimensional Hubbard model at finite temperature using controlled diagrammatic Monte Carlo calculations allowing for the computation of spectral properties in the infinite-size limit and, crucially, with arbitrary momentum resolution. We show that three distinct regimes are found as a function of do** and interaction strength, corresponding to a weakly correlated meta…
▽ More
We investigate the doped two-dimensional Hubbard model at finite temperature using controlled diagrammatic Monte Carlo calculations allowing for the computation of spectral properties in the infinite-size limit and, crucially, with arbitrary momentum resolution. We show that three distinct regimes are found as a function of do** and interaction strength, corresponding to a weakly correlated metal with properties close to those of the non-interacting system, a correlated metal with strong interaction effects including a resha** of the Fermi surface, and a pseudogap regime at low do** in which quasiparticle excitations are selectively destroyed near the antinodal regions of momentum space. We study the physical mechanism leading to the pseudogap and show that it forms both at weak coupling when the magnetic correlation length is large and at strong coupling when it is shorter. In both cases, we show that spin-fluctuation theory can be modified in order to account for the behavior of the non-local component of the self-energy. We discuss the fate of the pseudogap as temperature goes to zero and show that, remarkably, this regime extrapolates precisely to the ordered stripe phase found by ground-state methods. This handshake between finite temperature and ground-state results significantly advances the elaboration of a comprehensive picture of the physics of the doped Hubbard model.
△ Less
Submitted 19 September, 2022;
originally announced September 2022.
-
A Compensated Design of the LGAD Gain Layer
Authors:
Valentina Sola,
Roberta Arcidiacono,
Patrick Asenov,
Giacomo Borghi,
Maurizio Boscardin,
Nicolò Cartiglia,
Matteo Centis Vignali,
Tommaso Croci,
Marco Ferrero,
Alessandro Fondacci,
Giulia Gioachin,
Simona Giordanengo,
Leonardo Lantieri,
Marco Mandurrino,
Luca Menzio,
Vincenzo Monaco,
Arianna Morozzi,
Francesco Moscatelli,
Daniele Passeri,
Nadia Pastrone,
Giovanni Paternoster,
Federico Siviero,
Amedeo Staiano,
Marta Tornago
Abstract:
In this contribution, we present an innovative design of the Low-Gain Avalanche Diode (LGAD) gain layer, the p$^+$ implant responsible for the local and controlled signal multiplication. In the standard LGAD design, the gain layer is obtained by implanting $\sim$ 5E16/cm$^3$ atoms of an acceptor material, typically Boron or Gallium, in the region below the n$^{++}$ electrode. In our design, we aim…
▽ More
In this contribution, we present an innovative design of the Low-Gain Avalanche Diode (LGAD) gain layer, the p$^+$ implant responsible for the local and controlled signal multiplication. In the standard LGAD design, the gain layer is obtained by implanting $\sim$ 5E16/cm$^3$ atoms of an acceptor material, typically Boron or Gallium, in the region below the n$^{++}$ electrode. In our design, we aim at designing a gain layer resulting from the overlap of a p$^+$ and an n$^+$ implants: the difference between acceptor and donor do** will result in an effective concentration of about 5E16/cm$^3$, similar to standard LGADs. At present, the gain mechanism of LGAD sensors under irradiation is maintained up to a fluence of $\sim$ 1-2E15/cm$^2$, and then it is lost due to the acceptor removal mechanism. The new design will be more resilient to radiation, as both acceptor and donor atoms will undergo removal with irradiation, but their difference will maintain constant. The compensated design will empower the 4D tracking ability typical of the LGAD sensors well above 1E16/cm$^2$.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Silicon sensors with resistive read-out: Machine Learning techniques for ultimate spatial resolution
Authors:
Marta Tornago,
Flavio Giobergia,
Luca Menzio,
Federico Siviero,
Roberta Arcidiacono,
Nicolò Cartiglia,
Marco Costa,
Marco Ferrero,
Giulia Gioachin,
Marco Mandurrino,
Valentina Sola
Abstract:
Resistive AC-coupled Silicon Detectors (RSDs) are based on the Low Gain Avalanche Diode (LGAD) technology, characterized by a continuous gain layer, and by the innovative introduction of resistive read-out. Thanks to a novel electrode design aimed at maximizing signal sharing, RSD2, the second RSD production by Fondazione Bruno Kessler (FBK), achieves a position resolution on the whole pixel surfa…
▽ More
Resistive AC-coupled Silicon Detectors (RSDs) are based on the Low Gain Avalanche Diode (LGAD) technology, characterized by a continuous gain layer, and by the innovative introduction of resistive read-out. Thanks to a novel electrode design aimed at maximizing signal sharing, RSD2, the second RSD production by Fondazione Bruno Kessler (FBK), achieves a position resolution on the whole pixel surface of about 8 $μm$ for 200-$μm$ pitch. RSD2 arrays have been tested using a Transient Current Technique setup equipped with a 16-channel digitizer, and results on spatial resolution have been obtained with machine learning algorithms.
△ Less
Submitted 2 November, 2022; v1 submitted 17 August, 2022;
originally announced August 2022.
-
Beam test results of 25 $μ$m and 35 $μ$m thick FBK UFSD]{Beam test results of 25 $μ$m and 35 $μ$m thick FBK ultra fast silicon detectors
Authors:
F. Carnesecchi,
S. Strazzi,
A. Alici,
R. Arcidiacono,
G. Borghi,
M. Boscardin,
N. Cartiglia,
M. Centis Vignali,
D. Cavazza,
G. -F. Dalla Betta,
S. Durando,
M. Ferrero,
F. Ficorella,
O. Hammad Ali,
M. Mandurrino,
A. Margotti,
L. Menzio,
R. Nania,
L. Pancheri,
G. Paternoster,
G. Scioli,
F. Siviero,
V. Sola,
M. Tornago,
G. Vignola
Abstract:
This paper presents the measurements on first very thin Ultra Fast Silicon Detectors (UFSDs) produced by Fondazione Bruno Kessler; the data have been collected in a beam test setup at the CERN PS, using beam with a momentum of 12 GeV/c. UFSDs with a nominal thickness of 25 $μ$m and 35 $μ$m and an area of 1 $\times$ 1 $\text{mm}^2$ have been considered, together with an additional HPK 50-$μ$m thick…
▽ More
This paper presents the measurements on first very thin Ultra Fast Silicon Detectors (UFSDs) produced by Fondazione Bruno Kessler; the data have been collected in a beam test setup at the CERN PS, using beam with a momentum of 12 GeV/c. UFSDs with a nominal thickness of 25 $μ$m and 35 $μ$m and an area of 1 $\times$ 1 $\text{mm}^2$ have been considered, together with an additional HPK 50-$μ$m thick sensor, taken as reference. Their timing performances have been studied as a function of the applied voltage and gain. A time resolution of about 25 ps and of 22 ps at a voltage of 120 V and 240 V has been obtained for the 25 and 35 $μ$m thick UFSDs, respectively.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
Charge fluctuations, hydrodynamics and transport in the square-lattice Hubbard model
Authors:
J. Vucicevic,
S. Predin,
M. Ferrero
Abstract:
Recent experimental results suggest that a particular hydrodynamic theory describes charge fluctuations at long wavelengths in the square-lattice Hubbard model. Due to the continuity equation, the correlation functions for the charge and the current are directly connected: the parameters of the effective hydrodynamic model thus determine the optical conductivity. Here we investigate the validity o…
▽ More
Recent experimental results suggest that a particular hydrodynamic theory describes charge fluctuations at long wavelengths in the square-lattice Hubbard model. Due to the continuity equation, the correlation functions for the charge and the current are directly connected: the parameters of the effective hydrodynamic model thus determine the optical conductivity. Here we investigate the validity of the proposed hydrodynamic theory in the full range of parameters of the Hubbard model. In the non-interacting case, there is no effective hydrodynamics, and the charge fluctuations present a rich variety of non-universal behaviors. At weak coupling, the optical conductivity is consistent with the hydrodynamic theory: at low frequency one observes a Lorentzian-shaped Drude peak, but the high-frequency asymptotics is necessarily different; the high-temperature limit for the product of the two hydrodynamic model parameters is also in agreement with numerical data. At strong coupling, we find that a generalization of the proposed hydrodynamic law is consistent with our quantum Monte Carlo, as well as the finite-temperature Lanczos results from literature. Most importantly, the temperature dependence of the hydrodynamic parameters as well as the dc resistivity are found to be very similar in the weak and the strong-coupling regimes.
△ Less
Submitted 31 March, 2023; v1 submitted 8 August, 2022;
originally announced August 2022.
-
DC-coupled resistive silicon detectors for 4-D tracking
Authors:
L. Menzio,
R. Arcidiacono,
G. Borghi,
M. Boscardin,
N. Cartiglia,
M. Centis Vignali,
M. Costa,
G-F. Dalla Betta,
M. Ferrero,
F. Ficorella,
G. Gioachin,
M. Mandurrino,
L. Pancheri,
G. Paternoster,
F. Siviero,
V. Sola,
M. Tornago
Abstract:
In this work, we introduce a new design concept: the DC-Coupled Resistive Silicon Detectors, based on the LGAD technology. This new approach intends to address a few known features of the first generation of AC-Coupled Resistive Silicon Detectors (RSD). Our simulation exploits a fast hybrid approach based on a combination of two packages, Weightfield2 and LTSpice. It demonstrates that the key feat…
▽ More
In this work, we introduce a new design concept: the DC-Coupled Resistive Silicon Detectors, based on the LGAD technology. This new approach intends to address a few known features of the first generation of AC-Coupled Resistive Silicon Detectors (RSD). Our simulation exploits a fast hybrid approach based on a combination of two packages, Weightfield2 and LTSpice. It demonstrates that the key features of the RSD design are maintained, yielding excellent timing and spatial resolutions: a few tens of ps and a few microns. In the presentation, we will outline the optimization methodology and the results of the simulation. We will present detailed studies on the effect of changing the ratio between the n+ layer resistivity and the low-resistivity ring and on the achievable temporal and spatial resolution.
△ Less
Submitted 14 April, 2022;
originally announced April 2022.
-
4D Tracking: Present Status and Perspective
Authors:
N. Cartiglia,
R. Arcidiacono,
M. Costa,
M. Ferrero,
G. Gioachin,
M. Mandurrino,
L. Menzio,
F. Siviero,
V. Sola,
M. Tornago
Abstract:
The past ten years have seen the advent of silicon-based precise timing detectors for charged particle tracking. The underlying reason for this evolution is a design innovation: the Low-Gain Avalanche Diode (LGAD). In its simplicity, the LGAD design is an obvious step with momentous consequences: low gain leads to large signals maintaining sensors stability and low noise, allowing sensor segmentat…
▽ More
The past ten years have seen the advent of silicon-based precise timing detectors for charged particle tracking. The underlying reason for this evolution is a design innovation: the Low-Gain Avalanche Diode (LGAD). In its simplicity, the LGAD design is an obvious step with momentous consequences: low gain leads to large signals maintaining sensors stability and low noise, allowing sensor segmentation. Albeit introduced for a different reason, to compensate for charge trap** in irradiated silicon sensors, LGAD found fertile ground in the design of silicon-based timing detectors. Spurred by this design innovation, solid-state-based timing detectors for charged particles are going through an intense phase of R&D, and hybrid and monolithic sensors, with or without internal gain, are being explored. This contribution offers a review of this booming field.
△ Less
Submitted 11 July, 2022; v1 submitted 13 April, 2022;
originally announced April 2022.
-
First experimental results of the spatial resolution of RSD pad arrays read out with a 16-ch board
Authors:
F. Siviero,
F. Giobergia,
L. Menzio,
F. Miserocchi,
M. Tornago,
R. Arcidiacono,
N. Cartiglia,
M. Costa,
M. Ferrero,
G. Gioachin,
M. Mandurrino,
V. Sola
Abstract:
Resistive Silicon Detectors (RSD, also known as AC-LGAD) are innovative silicon sensors, based on the LGAD technology, characterized by a continuous gain layer that spreads across the whole sensor active area. RSDs are very promising tracking detectors, thanks to the combination of the built-in signal sharing with the internal charge multiplication, which allows large signals to be seen over multi…
▽ More
Resistive Silicon Detectors (RSD, also known as AC-LGAD) are innovative silicon sensors, based on the LGAD technology, characterized by a continuous gain layer that spreads across the whole sensor active area. RSDs are very promising tracking detectors, thanks to the combination of the built-in signal sharing with the internal charge multiplication, which allows large signals to be seen over multiple read-out channels. This work presents the first experimental results obtained from a 3$\times$4 array with 200~\mum~pitch, coming from the RSD2 production manufactured by FBK, read out with a 16-ch digitizer. A machine learning model has been trained, with experimental data taken with a precise TCT laser setup, and then used to predict the laser shot positions, finding a spatial resolution of $\sim$~5.5~\mum.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.
-
Tuning of gain layer do** concentration and Carbon implantation effect on deep gain layer
Authors:
S. M. Mazza,
C. Gee,
Y. Zhao,
R. Padilla,
E. Ryan,
N. Tournebise,
B. Darby,
F. McKinney-Martinez,
H. F. -W. Sadrozinski,
A. Seiden,
B. Schumm,
V. Cindro,
G. Kramberger,
I. Mandić,
M. Mikuž,
M. Zavrtanik,
R. Arcidiacono,
N. Cartiglia,
M. Ferrero,
M. Mandurrino,
V. Sola,
A. Staiano,
M. Boscardin,
G. F. Della Betta,
F. Ficorella
, et al. (2 additional authors not shown)
Abstract:
Next generation Low Gain Avalanche Diodes (LGAD) produced by Hamamatsu photonics (HPK) and Fondazione Bruno Kessler (FBK) were tested before and after irradiation with ~1MeV neutrons at the JSI facility in Ljubljana. Sensors were irradiated to a maximum 1-MeV equivalent fluence of 2.5E15 Neq/cm2. The sensors analysed in this paper are an improvement after the lessons learned from previous FBK and…
▽ More
Next generation Low Gain Avalanche Diodes (LGAD) produced by Hamamatsu photonics (HPK) and Fondazione Bruno Kessler (FBK) were tested before and after irradiation with ~1MeV neutrons at the JSI facility in Ljubljana. Sensors were irradiated to a maximum 1-MeV equivalent fluence of 2.5E15 Neq/cm2. The sensors analysed in this paper are an improvement after the lessons learned from previous FBK and HPK productions that were already reported in precedent papers. The gain layer of HPK sensors was fine-tuned to optimize the performance before and after irradiation. FBK sensors instead combined the benefit of Carbon infusion and deep gain layer to further the radiation hardness of the sensors and reduced the bulk thickness to enhance the timing resolution. The sensor performance was measured in charge collection studies using \b{eta}-particles from a 90Sr source and in capacitance-voltage scans (C-V) to determine the bias to deplete the gain layer. The collected charge and the timing resolution were measured as a function of bias voltage at -30C. Finally a correlation is shown between the bias voltage to deplete the gain layer and the bias voltage needed to reach a certain amount of gain in the sensor. HPK sensors showed a better performance before irradiation while maintaining the radiation hardness of the previous production. FBK sensors showed exceptional radiation hardness allowing a collected charge up to 10 fC and a time resolution of 40 ps at the maximum fluence.
△ Less
Submitted 31 January, 2022; v1 submitted 21 January, 2022;
originally announced January 2022.
-
Optimization of the Gain Layer Design of Ultra-Fast Silicon Detectors
Authors:
Federico Siviero,
Roberta Arcidiacono,
Giacomo Borghi,
Maurizio Boscardin,
Nicolo Cartiglia,
Matteo Centis Vignali,
Marco Costa,
Gian Franco Dalla Betta,
Marco Ferrero,
Francesco Ficorella,
Giulia Gioachin,
Marco Mandurrino,
Simone Mazza,
Luca Menzio,
Lucio Pancheri,
Giovanni Paternoster,
Hartmut F. W. Sadrozinski,
Abraham Seiden,
Valentina Sola,
Marta Tornago
Abstract:
In the past few years, the need of measuring accurately the spatial and temporal coordinates of the particles generated in high-energy physics experiments has spurred a strong R\&D in the field of silicon sensors. Within these research activities, the so-called Ultra-Fast Silicon Detectors (UFSDs), silicon sensors optimized for timing based on the Low-Gain Avalanche Diode (LGAD) design, have been…
▽ More
In the past few years, the need of measuring accurately the spatial and temporal coordinates of the particles generated in high-energy physics experiments has spurred a strong R\&D in the field of silicon sensors. Within these research activities, the so-called Ultra-Fast Silicon Detectors (UFSDs), silicon sensors optimized for timing based on the Low-Gain Avalanche Diode (LGAD) design, have been proposed and adopted by the CMS and ATLAS collaborations for their respective timing layers. The defining feature of the Ultra-Fast Silicon Detectors (UFSDs) is the internal multiplication mechanism, determined by the gain layer design. In this paper, the performances of several types of gain layers, measured with a telescope instrumented with a $^{90}$Sr $β$-source, are reported and compared. The measured sensors are produced by Fondazione Bruno Kessler (FBK) and Hamamatsu Photonics (HPK). The sensor yielding the best performance, both when new and irradiated, is an FBK 45\mum-thick sensor with a carbonated deep gain implant, where the carbon and the boron implants are annealed concurrently with a low thermal load. This sensor is able to achieve a time resolution of 40~ps up to a radiation fluence of~\fluence{2.5}{15}, delivering at least 5~fC of charge.
△ Less
Submitted 8 March, 2022; v1 submitted 1 December, 2021;
originally announced December 2021.
-
The second production of RSD (AC-LGAD) at FBK
Authors:
M. Mandurrino,
R. Arcidiacono,
A. Bisht,
G. Borghi,
M. Boscardin,
N. Cartiglia,
M. Centis Vignali,
G. -F. Dalla Betta,
M. Ferrero,
F. Ficorella,
O. Hammad Ali,
A. D. Martinez Rojas,
L. Menzio,
L. Pancheri,
G. Paternoster,
F. Siviero,
V. Sola,
M. Tornago
Abstract:
In this contribution we describe the second run of RSD (Resistive AC-Coupled Silicon Detectors) designed at INFN Torino and produced by Fondazione Bruno Kessler (FBK), Trento. RSD are n-in-p detectors intended for 4D particle tracking based on the LGAD technology that get rid of any segmentation implant in order to achieve the 100% fill-factor. They are characterized by three key-elements, (i) a c…
▽ More
In this contribution we describe the second run of RSD (Resistive AC-Coupled Silicon Detectors) designed at INFN Torino and produced by Fondazione Bruno Kessler (FBK), Trento. RSD are n-in-p detectors intended for 4D particle tracking based on the LGAD technology that get rid of any segmentation implant in order to achieve the 100% fill-factor. They are characterized by three key-elements, (i) a continuous gain implant, (ii) a resistive n-cathode and (iii) a dielectric coupling layer deposited on top, guaranteeing a good spatial reconstruction of the hit position while benefiting from the good timing properties of LGADs. We will start from the very promising results of our RSD1 batch in terms of tracking performances and then we will move to the description of the design of the RSD2 run. In particular, the principles driving the sensor design and the specific AC-electrode layout adopted to optimize the signal confinement will be addressed.
△ Less
Submitted 8 June, 2022; v1 submitted 28 November, 2021;
originally announced November 2021.
-
Inter-pad dead regions of irradiated FBK Low Gain Avalanche Detectors
Authors:
B. Darby,
S. M. Mazza,
F. McKinney-Martinez,
R. Padilla,
H. F. -W. Sadrozinski,
A. Seiden,
B. Schumm,
M. Wilder,
Y. Zhao,
R. Arcidiacono,
N. Cartiglia,
M. Ferrero,
M. Mandurrino,
V. Sola,
A. Staiano,
V. Cindro,
G. Kranberger,
I. Mandiz,
M. Mikuz,
M. Zavtranik,
M. Boscardin,
G. F. Della Betta,
F. Ficorella,
L. Pancheri,
G. Paternoster
Abstract:
Low Gain Avalanche Detectors (LGADs) are a type of thin silicon detector with a highly doped gain layer. LGADs manufactured by Fondazione Bruno Kessler (FBK) were tested before and after irradiation with neutrons. In this study, the Inter-pad distances (IPDs), defined as the width of the distances between pads, were measured with a TCT laser system. The response of the laser was tuned using $β$-pa…
▽ More
Low Gain Avalanche Detectors (LGADs) are a type of thin silicon detector with a highly doped gain layer. LGADs manufactured by Fondazione Bruno Kessler (FBK) were tested before and after irradiation with neutrons. In this study, the Inter-pad distances (IPDs), defined as the width of the distances between pads, were measured with a TCT laser system. The response of the laser was tuned using $β$-particles from a 90Sr source. These insensitive "dead zones" are created by a protection structure to avoid breakdown, the Junction Termination Extension (JTE), which separates the pads. The effect of neutron radiation damage at \fluence{1.5}{15}, and \fluence{2.5}{15} on IPDs was studied. These distances are compared to the nominal distances given from the vendor, it was found that the higher fluence corresponds to a better matching of the nominal IPD.
△ Less
Submitted 19 September, 2022; v1 submitted 24 November, 2021;
originally announced November 2021.
-
The Weak, the Strong and the Long Correlation Regimes of the Two-Dimensional Hubbard Model at Finite Temperature
Authors:
Fedor Šimkovic IV,
Riccardo Rossi,
Michel Ferrero
Abstract:
We investigate the momentum-resolved spin and charge susceptibilities, as well as the chemical potential and double occupancy in the two-dimensional Hubbard model as functions of do**, temperature and interaction strength. Through these quantities, we identify a weak-coupling regime, a strong-coupling regime with short-range correlations and an intermediate-coupling regime with long magnetic cor…
▽ More
We investigate the momentum-resolved spin and charge susceptibilities, as well as the chemical potential and double occupancy in the two-dimensional Hubbard model as functions of do**, temperature and interaction strength. Through these quantities, we identify a weak-coupling regime, a strong-coupling regime with short-range correlations and an intermediate-coupling regime with long magnetic correlation lengths. In the spin channel, we observe an additional crossover from commensurate to incommensurate correlations. In contrast, we find charge correlations to be only short ranged for all studied temperatures, which suggests that the spin and charge responses are decoupled. These findings were obtained by a novel connected determinant diagrammatic Monte Carlo algorithm for the computation of double expansions, which we introduce in this paper. This permits us to obtain numerically exact results at unprecedentedly low temperatures $T\geq 0.067$ for interactions up to $U\leq 8$, while working on arbitrarily large lattices. Our method also allows us to gain physical insights from investigating the analytic structure of perturbative series. We connect to previous work by studying smaller lattice geometries and report substantial finite-size effects.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Inexorable Edge Kondo Breakdown in Topological Kondo Insulators
Authors:
Zhihui Luo,
Michel Ferrero,
Dao-Xin Yao,
Wei Wu
Abstract:
Kondo breakdown is one of the most intriguing problems in strongly correlated electron systems, as it is rooted in many anomalous electron behaviors found in heavy-fermion materials. In Kondo lattice systems, Kondo breakdown can arise from either strong magnetic frustrations or critical fluctuations of collective modes. Here, we reveal a new type of Kondo breakdown with a fully different origin in…
▽ More
Kondo breakdown is one of the most intriguing problems in strongly correlated electron systems, as it is rooted in many anomalous electron behaviors found in heavy-fermion materials. In Kondo lattice systems, Kondo breakdown can arise from either strong magnetic frustrations or critical fluctuations of collective modes. Here, we reveal a new type of Kondo breakdown with a fully different origin in interacting topological Kondo insulators. By employing numerically exact quantum Monte Carlo simulations, we show that with open boundary conditions, Kondo screening is inexorably destroyed by interaction effects on edges or corners in these systems. We argue that the Kondo breakdown is enforced by the symmetries of the system, because the ground states are symmetry protected Haldane phases.
△ Less
Submitted 14 November, 2021; v1 submitted 9 October, 2021;
originally announced October 2021.
-
Combined analysis of HPK 3.1 LGADs using a proton beam, beta source, and probe station towards establishing high volume quality control
Authors:
Ryan Heller,
Andrés Abreu,
Artur Apresyan,
Roberta Arcidiacono,
Nicolò Cartiglia,
Karri DiPetrillo,
Marco Ferrero,
Meraj Hussain,
Margaret Lazarovitz,
Hakseong Lee,
Sergey Los,
Chang-Seong Moon,
Cristián Peña,
Federico Siviero,
Valentina Sola,
Tanvi Wamorkar,
Si Xie
Abstract:
The upgrades of the CMS and ATLAS experiments for the high luminosity phase of the Large Hadron Collider will employ precision timing detectors based on Low Gain Avalanche Detectors (LGADs). We present a suite of results combining measurements from the Fermilab Test Beam Facility, a beta source telescope, and a probe station, allowing full characterization of the HPK type 3.1 production of LGAD pr…
▽ More
The upgrades of the CMS and ATLAS experiments for the high luminosity phase of the Large Hadron Collider will employ precision timing detectors based on Low Gain Avalanche Detectors (LGADs). We present a suite of results combining measurements from the Fermilab Test Beam Facility, a beta source telescope, and a probe station, allowing full characterization of the HPK type 3.1 production of LGAD prototypes developed for these detectors. We demonstrate that the LGAD response to high energy test beam particles is accurately reproduced with a beta source. We further establish that probe station measurements of the gain implant accurately predict the particle response and operating parameters of each sensor, and conclude that the uniformity of the gain implant in this production is sufficient to produce full-sized sensors for the ATLAS and CMS timing detectors.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector
Authors:
R. Abbott,
A. Abreu,
F. Addesa,
M. Alhusseini,
T. Anderson,
Y. Andreev,
A. Apresyan,
R. Arcidiacono,
M. Arenton,
E. Auffray,
D. Bastos,
L. A. T. Bauerdick,
R. Bellan,
M. Bellato,
A. Benaglia,
M. Benettoni,
R. Bertoni,
M. Besancon,
S. Bharthuar,
A. Bornheim,
E. Brücken,
J. N. Butler,
C. Campagnari,
M. Campana,
R. Carlin
, et al. (174 additional authors not shown)
Abstract:
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about…
▽ More
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices.
△ Less
Submitted 16 July, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
Fast Principal Minor Algorithms for Quantum Many Body Systems
Authors:
Fedor Šimkovic,
Michel Ferrero
Abstract:
The computation of determinants plays a central role in diagrammatic Monte Carlo algorithms for strongly correlated systems. The evaluation of large numbers of determinants can often be the limiting computational factor determining the number of attainable diagrammatic expansion orders. In this work we build upon the algorithm presented in [\emph{Linear Algebra and its applications} 419.1 (2006),…
▽ More
The computation of determinants plays a central role in diagrammatic Monte Carlo algorithms for strongly correlated systems. The evaluation of large numbers of determinants can often be the limiting computational factor determining the number of attainable diagrammatic expansion orders. In this work we build upon the algorithm presented in [\emph{Linear Algebra and its applications} 419.1 (2006), 107-124] which computes all principal minors of a matrix in $O(2^n)$ operations. We present multiple generalizations of the algorithm to the efficient evaluation of certain subsets of all principal minors with immediate applications to Connected Determinant Diagrammatic Monte Carlo within the normal and symmetry-broken phases as well as Continuous-time Quantum Monte Carlo. Additionally, we improve the asymptotic scaling of diagrammatic Monte Carlo formulated in real-time to $O(2^n)$ and report speedups of up to a factor $25$ at computationally realistic expansion orders. We further show that all permanent-principal-minors, corresponding to sums of bosonic Feynman diagrams, can be computed in $O(3^n)$, making diagrammatic Monte Carlo for bosonic and mixed systems a viable path worth exploring.
△ Less
Submitted 29 July, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
High-order expansion around BCS theory
Authors:
G. Spada,
R. Rossi,
F. Simkovic,
R. Garioud,
M. Ferrero,
K. Van Houcke,
F. Werner
Abstract:
We demonstrate that summation of connected diagrams to high order starting from a BCS hamiltonian is a viable generic unbiased approach for strongly correlated fermions in superconducting or superfluid phases. For the 3D attractive Hubbard model in a strongly correlated regime, we observe convergence of the diagrammatic series, evaluated up to 12 loops thanks to the connected determinant diagramma…
▽ More
We demonstrate that summation of connected diagrams to high order starting from a BCS hamiltonian is a viable generic unbiased approach for strongly correlated fermions in superconducting or superfluid phases. For the 3D attractive Hubbard model in a strongly correlated regime, we observe convergence of the diagrammatic series, evaluated up to 12 loops thanks to the connected determinant diagrammatic Monte Carlo algorithm. Our study includes the polarized regime, where conventional quantum Monte Carlo methods suffer from the fermion sign problem. Upon increasing the Zeeman field, we observe the first-order superconducting-to-normal phase transition at low temperature, and a thermally activated polarization of the superconducting phase well described by quasiparticle theory.
△ Less
Submitted 20 June, 2023; v1 submitted 22 March, 2021;
originally announced March 2021.
-
Mott insulating states with competing orders in the triangular lattice Hubbard model
Authors:
Alexander Wietek,
Riccardo Rossi,
Fedor Šimkovic IV,
Marcel Klett,
Philipp Hansmann,
Michel Ferrero,
E. Miles Stoudenmire,
Thomas Schäfer,
Antoine Georges
Abstract:
The physics of the triangular lattice Hubbard model exhibits a rich phenomenology, ranging from a metal-insulator transition, intriguing thermodynamic behavior, and a putative spin liquid phase at intermediate coupling, ultimately becoming a magnetic insulator at strong coupling. In this multimethod study, we combine a finite-temperature tensor network method, minimally entangled thermal typical s…
▽ More
The physics of the triangular lattice Hubbard model exhibits a rich phenomenology, ranging from a metal-insulator transition, intriguing thermodynamic behavior, and a putative spin liquid phase at intermediate coupling, ultimately becoming a magnetic insulator at strong coupling. In this multimethod study, we combine a finite-temperature tensor network method, minimally entangled thermal typical states (METTS), with two Green-function-based methods, connected-determinant diagrammatic Monte Carlo and cellular dynamical mean-field theory, to establish several aspects of this model. We elucidate the evolution from the metallic to the insulating regime from the complementary perspectives brought by these different methods. We compute the full thermodynamics of the model on a width-four cylinder using METTS in the intermediate to strong coupling regime. We find that the insulating state hosts a large entropy at intermediate temperatures, which increases with the strength of the coupling. Correspondingly, and consistently with a thermodynamic Maxwell relation, the double occupancy has a minimum as a function of temperature which is the manifestation of the Pomeranchuk effect of increased localization upon heating. The intermediate coupling regime is found to exhibit both pronounced chiral as well as stripy antiferromagnetic spin correlations. We propose a scenario in which time-reversal symmetry-broken states compete with stripy-spin states at lowest temperatures.
△ Less
Submitted 19 October, 2021; v1 submitted 25 February, 2021;
originally announced February 2021.
-
Analytical solution for time-integrals in diagrammatic expansions: application to real-frequency diagrammatic Monte Carlo
Authors:
J. Vucicevic,
P. Stipsic,
M. Ferrero
Abstract:
The past years have seen a revived interest in the diagrammatic Monte Carlo (DiagMC) methods for interacting fermions on a lattice. A promising recent development allows one to now circumvent the analytical continuation of dynamic observables in DiagMC calculations within the Matsubara formalism. This is made possible by symbolic algebra algorithms, which can be used to analytically solve the inte…
▽ More
The past years have seen a revived interest in the diagrammatic Monte Carlo (DiagMC) methods for interacting fermions on a lattice. A promising recent development allows one to now circumvent the analytical continuation of dynamic observables in DiagMC calculations within the Matsubara formalism. This is made possible by symbolic algebra algorithms, which can be used to analytically solve the internal Matsubara frequency summations of Feynman diagrams. In this paper, we take a different approach and show that it yields improved results. We present a closed-form analytical solution of imaginary-time integrals that appear in the time-domain formulation of Feynman diagrams. We implement and test a DiagMC algorithm based on this analytical solution and show that it has numerous significant advantages. Most importantly, the algorithm is general enough for any kind of single-time correlation function series, involving any single-particle vertex insertions. Therefore, it readily allows for the use of action-shifted schemes, aimed at improving the convergence properties of the series. By performing a frequency-resolved action-shift tuning, we are able to further improve the method and converge the self-energy in a non-trivial regime, with only 3-4 perturbation orders. Finally, we identify time integrals of the same general form in many commonly used Monte Carlo algorithms and therefore expect a broader usage of our analytical solution.
△ Less
Submitted 25 March, 2021; v1 submitted 16 November, 2020;
originally announced November 2020.
-
First application of machine learning algorithms to the position reconstruction in Resistive Silicon Detectors
Authors:
Federico Siviero,
Roberta Arcidiacono,
Nicolò Cartiglia,
Marco Costa,
Marco Ferrero,
Marco Mandurrino,
Valentina Sola,
Amedeo Staiano,
Marta Tornago
Abstract:
RSDs (Resistive AC-Coupled Silicon Detectors) are n-in-p silicon sensors based on the LGAD (Low-Gain Avalanche Diode) technology, featuring a continuous gain layer over the whole sensor area. The truly innovative feature of these sensors is that the signal induced by an ionising particle is seen on several pixels, allowing the use of reconstruction techniques that combine the information from many…
▽ More
RSDs (Resistive AC-Coupled Silicon Detectors) are n-in-p silicon sensors based on the LGAD (Low-Gain Avalanche Diode) technology, featuring a continuous gain layer over the whole sensor area. The truly innovative feature of these sensors is that the signal induced by an ionising particle is seen on several pixels, allowing the use of reconstruction techniques that combine the information from many read-out channels. In this contribution, the first application of a machine learning technique to RSD devices is presented. The spatial resolution of this technique is compared to that obtained with the standard RSD reconstruction methods that use analytical descriptions of the signal sharing mechanism. A Multi-Output regressor algorithm, trained with a combination of simulated and real data, leads to a spatial resolution of less than 2 $μm$ for a sensor with a 100 $μm$ pixel. The prospects of future improvements are also discussed.
△ Less
Submitted 26 January, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
Efficient One-Loop-Renormalized Vertex Expansions with Connected Determinant Diagrammatic Monte Carlo
Authors:
Fedor Šimkovic IV,
Riccardo Rossi,
Michel Ferrero
Abstract:
We present a technique that enables the evaluation of perturbative expansions based on one-loop-renormalized vertices up to large expansion orders. Specifically, we show how to compute large-order corrections to the random phase approximation in either the particle-hole or particle-particle channels. The algorithm's efficiency is achieved by the summation over contributions of all symmetrized Feyn…
▽ More
We present a technique that enables the evaluation of perturbative expansions based on one-loop-renormalized vertices up to large expansion orders. Specifically, we show how to compute large-order corrections to the random phase approximation in either the particle-hole or particle-particle channels. The algorithm's efficiency is achieved by the summation over contributions of all symmetrized Feynman diagram topologies using determinants, and by integrating out analytically the two-body long-range interactions in order to yield an effective zero-range interaction. Notably, the exponential scaling of the algorithm as a function of perturbation order leads to a polynomial scaling of the approximation error with computational time for a convergent series. To assess the performance of our approach, we apply it to the non-perturbative regime of the square-lattice fermionic Hubbard model away from half-filling and report, as compared to the bare interaction expansion algorithm, significant improvements of the Monte Carlo variance as well as the convergence properties of the resulting perturbative series.
△ Less
Submitted 17 August, 2020;
originally announced August 2020.
-
Resistive AC-Coupled Silicon Detectors: principles of operation and first results from a combined analysis of beam test and laser data
Authors:
M. Tornago,
R. Arcidiacono,
N. Cartiglia,
M. Costa,
M. Ferrero,
M. Mandurrino,
F. Siviero,
V. Sola,
A. Staiano,
A. Apresyan,
K. Di Petrillo,
R. Heller,
S. Los,
G. Borghi,
M. Boscardin,
G-F Dalla Betta,
F. Ficorella,
L. Pancheri,
G. Paternoster,
H. Sadrozinski,
A. Seiden
Abstract:
This paper presents the principles of operation of Resistive AC-Coupled Silicon Detectors (RSDs) and measurements of the temporal and spatial resolutions using a combined analysis of laser and beam test data. RSDs are a new type of n-in-p silicon sensor based on the Low-Gain Avalanche Diode (LGAD) technology, where the $n^+$ implant has been designed to be resistive, and the read-out is obtained v…
▽ More
This paper presents the principles of operation of Resistive AC-Coupled Silicon Detectors (RSDs) and measurements of the temporal and spatial resolutions using a combined analysis of laser and beam test data. RSDs are a new type of n-in-p silicon sensor based on the Low-Gain Avalanche Diode (LGAD) technology, where the $n^+$ implant has been designed to be resistive, and the read-out is obtained via AC-coupling. The truly innovative feature of RSD is that the signal generated by an im**ing particle is shared isotropically among multiple read-out pads without the need for floating electrodes or an external magnetic field. Careful tuning of the coupling oxide thickness and the $n^+$ do** profile is at the basis of the successful functioning of this device. Several RSD matrices with different pad width-pitch geometries have been extensively tested with a laser setup in the Laboratory for Innovative Silicon Sensors in Torino, while a smaller set of devices have been tested at the Fermilab Test Beam Facility with a 120 GeV/c proton beam. The measured spatial resolution ranges between $2.5\; μm$ for 70-100 pad-pitch geometry and $17\; μm$ with 200-500 matrices, a factor of 10 better than what is achievable in binary read-out ($bin\; size/ \sqrt{12}$). Beam test data show a temporal resolution of $\sim 40\; ps$ for 200-$μm$ pitch devices, in line with the best performances of LGAD sensors at the same gain.
△ Less
Submitted 11 February, 2021; v1 submitted 18 July, 2020;
originally announced July 2020.
-
Tracking the Footprints of Spin Fluctuations: A MultiMethod, MultiMessenger Study of the Two-Dimensional Hubbard Model
Authors:
Thomas Schäfer,
Nils Wentzell,
Fedor Šimkovic IV,
Yuan-Yao He,
Cornelia Hille,
Marcel Klett,
Christian J. Eckhardt,
Behnam Arzhang,
Viktor Harkov,
François-Marie Le Régent,
Alfred Kirsch,
Yan Wang,
Aaram J. Kim,
Evgeny Kozik,
Evgeny A. Stepanov,
Anna Kauch,
Sabine Andergassen,
Philipp Hansmann,
Daniel Rohe,
Yuri M. Vilk,
James P. F. LeBlanc,
Shiwei Zhang,
A. -M. S. Tremblay,
Michel Ferrero,
Olivier Parcollet
, et al. (1 additional authors not shown)
Abstract:
The Hubbard model represents the fundamental model for interacting quantum systems and electronic correlations. Using the two-dimensional half-filled Hubbard model at weak coupling as a testing ground, we perform a comparative study of a comprehensive set of state of the art quantum many-body methods. Upon cooling into its insulating antiferromagnetic ground-state, the model hosts a rich sequence…
▽ More
The Hubbard model represents the fundamental model for interacting quantum systems and electronic correlations. Using the two-dimensional half-filled Hubbard model at weak coupling as a testing ground, we perform a comparative study of a comprehensive set of state of the art quantum many-body methods. Upon cooling into its insulating antiferromagnetic ground-state, the model hosts a rich sequence of distinct physical regimes with crossovers between a high-temperature incoherent regime, an intermediate temperature metallic regime and a low-temperature insulating regime with a pseudogap created by antiferromagnetic fluctuations. We assess the ability of each method to properly address these physical regimes and crossovers through the computation of several observables probing both quasiparticle properties and magnetic correlations, with two numerically exact methods (diagrammatic and determinantal quantum Monte Carlo) serving as a benchmark. By combining computational results and analytical insights, we elucidate the nature and role of spin fluctuations in each of these regimes. Based on this analysis, we explain how quasiparticles can coexist with increasingly long-range antiferromagnetic correlations, and why dynamical mean-field theory is found to provide a remarkably accurate approximation of local quantities in the metallic regime. We also critically discuss whether imaginary time methods are able to capture the non-Fermi liquid singularities of this fully nested system.
△ Less
Submitted 29 March, 2021; v1 submitted 18 June, 2020;
originally announced June 2020.
-
Intrinsic time resolution of 3D-trench silicon pixels for charged particle detection
Authors:
Lucio Anderlini,
Mauro Aresti,
Andrea Bizzeti,
Maurizio Boscardin,
Alessandro Cardini,
Gian-Franco Dalla Betta,
Marco Ferrero,
Giulio Forcolin,
Michela Garau,
Adriano Lai,
Andrea Lampis,
Angelo Loi,
Chiara Lucarelli,
Roberto Mendicino,
Roberto Mulargia,
Margherita Obertino,
Enrico Robutti,
Sabina Ronchin,
Marta Ruspa,
Stefania Vecchi
Abstract:
In the last years, high-resolution time tagging has emerged as the tool to tackle the problem of high-track density in the detectors of the next generation of experiments at particle colliders. Time resolutions below 50ps and event average repetition rates of tens of MHz on sensor pixels having a pitch of 50$μ$m are typical minimum requirements. This poses an important scientific and technological…
▽ More
In the last years, high-resolution time tagging has emerged as the tool to tackle the problem of high-track density in the detectors of the next generation of experiments at particle colliders. Time resolutions below 50ps and event average repetition rates of tens of MHz on sensor pixels having a pitch of 50$μ$m are typical minimum requirements. This poses an important scientific and technological challenge on the development of particle sensors and processing electronics. The TIMESPOT initiative (which stands for TIME and SPace real-time Operating Tracker) aims at the development of a full prototype detection system suitable for the particle trackers of the next-to-come particle physics experiments. This paper describes the results obtained on the first batch of TIMESPOT silicon sensors, based on a novel 3D MEMS (micro electro-mechanical systems) design. Following this approach, the performance of other ongoing silicon sensor developments has been matched and overcome, while using a technology which is known to be robust against radiation degradation. A time resolution of the order of 20ps has been measured at room temperature suggesting also possible improvements after further optimisations of the front-end electronics processing stage.
△ Less
Submitted 29 July, 2020; v1 submitted 22 April, 2020;
originally announced April 2020.
-
Effect of deep gain layer and Carbon infusion on LGAD radiation hardness
Authors:
R Padilla,
C. Labitan,
Z. Galloway,
C. Gee,
S. M. Mazza,
F. McKinney-Martinez,
H. F. -W. Sadrozinski,
A. Seiden,
B. Schumm,
M. Wilder,
Y. Zhao,
H. Ren,
Y. **,
M. Lockerby,
V. Cindro,
G. Kramberger,
I. Mandiz,
M. Mikuz,
M. Zavrtanik,
R. Arcidiacono,
N. Cartiglia,
M. Ferrero,
M. Mandurrino,
V. Sola,
A. Staiano
Abstract:
The properties of 50 um thick Low Gain Avalanche Diode (LGAD) detectors manufactured by Hamamatsu photonics (HPK) and Fondazione Bruno Kessler (FBK) were tested before and after irradiation with 1 MeV neutrons. Their performance were measured in charge collection studies using b-particles from a 90Sr source and in capacitance-voltage scans (C-V) to determine the bias to deplete the gain layer. Car…
▽ More
The properties of 50 um thick Low Gain Avalanche Diode (LGAD) detectors manufactured by Hamamatsu photonics (HPK) and Fondazione Bruno Kessler (FBK) were tested before and after irradiation with 1 MeV neutrons. Their performance were measured in charge collection studies using b-particles from a 90Sr source and in capacitance-voltage scans (C-V) to determine the bias to deplete the gain layer. Carbon infusion to the gain layer of the sensors was tested by FBK in the UFSD3 production. HPK instead produced LGADs with a very thin, highly doped and deep multiplication layer. The sensors were exposed to a neutron fluence from 4e14 neq/cm2 to 4e15 neq/cm2. The collected charge and the timing resolution were measured as a function of bias voltage at -30C, furthermore the profile of the capacitance over voltage of the sensors was measured.
△ Less
Submitted 27 July, 2020; v1 submitted 10 April, 2020;
originally announced April 2020.
-
Silicon Sensors for Future Particle Trackers
Authors:
N. Cartiglia,
R. Arcidiacono,
G. Borghi,
M. Boscardin,
M. Costa,
Z. Galloway,
F. Fausti,
M. Ferrero,
F. Ficorella,
M. Mandurrino,
S. Mazza,
E. J. Olave,
G. Paternoster,
F. Siviero,
H. F-W. Sadrozinski,
V. Sola,
A. Staiano,
A. Seiden,
M. Tornago,
Y. Zhao
Abstract:
Several future high-energy physics facilities are currently being planned. The proposed projects include high energy $e^+ e^-$ circular and linear colliders, hadron colliders and muon colliders, while the Electron-Ion Collider (EIC) has already been approved for construction at the Brookhaven National Laboratory. Each proposal has its own advantages and disadvantages in term of readiness, cost, sc…
▽ More
Several future high-energy physics facilities are currently being planned. The proposed projects include high energy $e^+ e^-$ circular and linear colliders, hadron colliders and muon colliders, while the Electron-Ion Collider (EIC) has already been approved for construction at the Brookhaven National Laboratory. Each proposal has its own advantages and disadvantages in term of readiness, cost, schedule and physics reach, and each proposal requires the design and production of specific new detectors. This paper first presents the performances required to the future silicon tracking systems at the various new facilities, and then it illustrates a few possibilities for the realization of such silicon trackers. The challenges posed by the future facilities require a new family of silicon detectors, where features such as impact ionization, radiation damage saturation, charge sharing, and analog readout are exploited to meet these new demands.
△ Less
Submitted 31 March, 2020;
originally announced March 2020.
-
A new detector for the beam energy measurement in proton therapy: a feasibility study
Authors:
A. Vignati,
S. Giordanengo,
F. Mas Milian,
Z. Ahmadi Ganjeh,
M. Donetti,
F. Fausti,
M. Ferrero,
O. Hammad Ali,
O. A. Martì Villarreal,
G. Mazza,
Z. Shakarami,
V. Sola,
A. Staiano,
R. Cirio,
R. Sacchi,
V. Monaco,
.
Abstract:
Fast procedures for the beam quality assessment and for the monitoring of beam energy modulations during the irradiation are among the most urgent improvements in particle therapy. Indeed, the online measurement of the particle beam energy could allow assessing the range of penetration during treatments, encouraging the development of new dose delivery techniques for moving targets. Towards this e…
▽ More
Fast procedures for the beam quality assessment and for the monitoring of beam energy modulations during the irradiation are among the most urgent improvements in particle therapy. Indeed, the online measurement of the particle beam energy could allow assessing the range of penetration during treatments, encouraging the development of new dose delivery techniques for moving targets. Towards this end, the proof of concept of a new device, able to measure in a few seconds the energy of clinical proton beams (from 60 to 230 MeV) from the Time of Flight (ToF) of protons, is presented. The prototype consists of two Ultra Fast Silicon Detector (UFSD) pads, featuring an active thickness of 80 um and a sensitive area of 3 x 3 mm2, aligned along the beam direction in a telescope configuration, connected to a broadband amplifier and readout by a digitizer. Measurements were performed at the Centro Nazionale di Adroterapia Oncologica (CNAO, Pavia, Italy), at five different clinical beam energies and four distances between the sensors (from 7 to 97 cm) for each energy. In order to derive the beam energy from the measured average ToF, several systematic effects were considered, Monte Carlo simulations were developed to validate the method and a global fit approach was adopted to calibrate the system. The results were benchmarked against the energy values obtained from the water equivalent depths provided by CNAO. Deviations of few hundreds of keV have been achieved for all considered proton beam energies for both 67 and 97 cm distances between the sensors and few seconds of irradiation were necessary to collect the required statistics. These preliminary results indicate that a telescope of UFSDs could achieve in a few seconds the accuracy required for the clinical application and therefore encourage further investigations towards the improvement and the optimization of the present prototype.
△ Less
Submitted 19 March, 2020;
originally announced March 2020.
-
Experimental Study of Acceptor Removal in UFSD
Authors:
Y. **,
H. Ren,
S. Christie,
Z. Galloway,
C. Gee,
C. Labitan,
M. Lockerby,
F. Martinez-McKinney,
S. M. Mazza,
R. Padilla,
H. F. -W. Sadrozinski,
B. Schumm,
A. Seiden,
M. Wilder,
W. Wyatt,
Y. Zhao,
R. Arcidiacono,
N. Cartiglia,
M. Ferrero,
M. Mandurrino,
F. Siviero,
V. Sola,
M. Tornago,
V. Cindro,
A. Howard
, et al. (3 additional authors not shown)
Abstract:
The performance of the Ultra-Fast Silicon Detectors (UFSD) after irradiation with neutrons and protons is compromised by the removal of acceptors in the thin layer below the junction responsible for the gain. This effect is tested both with C-V measurements of the do** concentration and with measurements of charge collection using charged particles. We find a perfect linear correlation between t…
▽ More
The performance of the Ultra-Fast Silicon Detectors (UFSD) after irradiation with neutrons and protons is compromised by the removal of acceptors in the thin layer below the junction responsible for the gain. This effect is tested both with C-V measurements of the do** concentration and with measurements of charge collection using charged particles. We find a perfect linear correlation between the bias voltage to deplete the gain layer determined with C-V and the bias voltage to collect a defined charge, measured with charge collection. An example for the usefulness of this correlation is presented.
△ Less
Submitted 16 September, 2020; v1 submitted 16 March, 2020;
originally announced March 2020.
-
High performance picosecond- and micron-level 4D particle tracking with 100% fill-factor Resistive AC-Coupled Silicon Detectors (RSD)
Authors:
M. Mandurrino,
N. Cartiglia,
M. Tornago,
M. Ferrero,
F. Siviero,
G. Paternoster,
F. Ficorella,
M. Boscardin,
L. Pancheri,
G. F. Dalla Betta
Abstract:
In this paper we present a complete characterization of the first batch of Resistive AC-Coupled Silicon Detectors, called RSD1, designed at INFN Torino and manufactured by Fondazione Bruno Kessler (FBK) in Trento. With their 100% fill-factor, RSD represent the new enabling technology for high-precision 4D-tracking. Indeed, being based on the well-known charge multiplication mechanism of Low-Gain A…
▽ More
In this paper we present a complete characterization of the first batch of Resistive AC-Coupled Silicon Detectors, called RSD1, designed at INFN Torino and manufactured by Fondazione Bruno Kessler (FBK) in Trento. With their 100% fill-factor, RSD represent the new enabling technology for high-precision 4D-tracking. Indeed, being based on the well-known charge multiplication mechanism of Low-Gain Avalanche Detectors (LGAD), they benefit from the very good timing performances of such technology together with an unprecedented resolution of the spatial tracking, which allows to reach the micron-level scale in the track reconstruction. This is essentially due to the absence of any segmentation structure between pads (100% fill-factor) and to other two innovative key-features: the first one is a properly doped n+ resistive layer, slowing down the charges just after being multiplied, and the second one is a dielectric layer grown on Silicon, inducing a capacitive coupling on the metal pads deposited on top of the detector. The very good spatial resolution (micron-level) we measured experimentally - higher than the nominal pad pitch - comes from the analogical nature of the readout of signals, whose amplitude attenuates from the pad center to its periphery, while the outstanding results in terms of timing (less than 14 ps, even better than standard LGAD) are due to a combination of very-fine pitch, analogical response and charge multiplication.
△ Less
Submitted 24 March, 2020; v1 submitted 10 March, 2020;
originally announced March 2020.
-
Renormalized perturbation theory at large expansion orders
Authors:
Riccardo Rossi,
Fedor Simkovic,
Michel Ferrero
Abstract:
We present a general formalism that allows for the computation of large-order renormalized expansions in the spacetime representation, effectively doubling the numerically attainable perturbation order of renormalized Feynman diagrams. We show that this formulation compares advantageously to the currently standard techniques due to its high efficiency, simplicity, and broad range of applicability.…
▽ More
We present a general formalism that allows for the computation of large-order renormalized expansions in the spacetime representation, effectively doubling the numerically attainable perturbation order of renormalized Feynman diagrams. We show that this formulation compares advantageously to the currently standard techniques due to its high efficiency, simplicity, and broad range of applicability. Our formalism permits to easily complement perturbation theory with non-perturbative information, which we illustrate by implementing expansions renormalized by the addition of a gap or the inclusion of Dynamical Mean-Field Theory. As a result, we present numerically-exact results for the square-lattice Fermi-Hubbard model in the low temperature non-Fermi-liquid regime and show the momentum-dependent suppression of fermionic excitations in the antinodal region.
△ Less
Submitted 24 January, 2020;
originally announced January 2020.
-
Not all doped Mott insulators have a pseudogap: key role of van Hove singularities
Authors:
Wei Wu,
Mathias S. Scheurer,
Michel Ferrero,
Antoine Georges
Abstract:
The Mott insulating phase of the parent compounds is frequently taken as starting point for the underdoped high-$T_c$ cuprate superconductors. In particular, the pseudogap state is often considered as deriving from the Mott insulator. In this work, we systematically investigate different weakly-doped Mott insulators on the square and triangular lattice to clarify the relationship between the pseud…
▽ More
The Mott insulating phase of the parent compounds is frequently taken as starting point for the underdoped high-$T_c$ cuprate superconductors. In particular, the pseudogap state is often considered as deriving from the Mott insulator. In this work, we systematically investigate different weakly-doped Mott insulators on the square and triangular lattice to clarify the relationship between the pseudogap and Mottness. We show that do** a two-dimensional Mott insulator does not necessarily lead to a pseudogap phase. Despite its inherent strong-coupling nature, we find that the existence or absence of a pseudogap depends sensitively on non-interacting band parameters and identify the crucial role played by the van Hove singularities of the system. Motivated by a SU(2) gauge theory for the pseudogap state, we propose and verify numerically a simple equation that governs the evolution of characteristic features in the electronic scattering rate.
△ Less
Submitted 31 December, 2019;
originally announced January 2020.
-
Finite temperature density matrix embedding theory
Authors:
Chong Sun,
Ushnish Ray,
Zhi-Hao Cui,
Miles Stoudenmire,
Michel Ferrero,
Garnet Kin-Lic Chan
Abstract:
We describe a formulation of the density matrix embedding theory at finite temperature. We present a generalization of the ground-state bath orbital construction that embeds a mean-field finite-temperature density matrix up to a given order in the Hamiltonian, or the Hamiltonian up to a given order in the density matrix. We assess the performance of the finite-temperature density matrix embedding…
▽ More
We describe a formulation of the density matrix embedding theory at finite temperature. We present a generalization of the ground-state bath orbital construction that embeds a mean-field finite-temperature density matrix up to a given order in the Hamiltonian, or the Hamiltonian up to a given order in the density matrix. We assess the performance of the finite-temperature density matrix embedding on the 1D Hubbard model both at half-filling and away from it, and the 2D Hubbard model at half-filling, comparing to exact data where available, as well as results from finite-temperature density matrix renormalization group, dynamical mean-field theory, and dynamical cluster approximations. The accuracy of finite-temperature density matrix embedding appears comparable to that of the ground-state theory, with at most a modest increase in bath size, and competitive with that of cluster dynamical mean-field theory.
△ Less
Submitted 18 November, 2019;
originally announced November 2019.
-
Real-frequency Diagrammatic Monte Carlo at Finite Temperature
Authors:
Jaksa Vucicevic,
Michel Ferrero
Abstract:
Diagrammatic expansions are a central tool for treating correlated electron systems. At thermal equilibrium, they are most naturally defined within the Matsubara formalism. However, extracting any dynamic response function from a Matsubara calculation ultimately requires the ill-defined analytical continuation from the imaginary- to the real-frequency domain. It was recently proposed [Phys. Rev. B…
▽ More
Diagrammatic expansions are a central tool for treating correlated electron systems. At thermal equilibrium, they are most naturally defined within the Matsubara formalism. However, extracting any dynamic response function from a Matsubara calculation ultimately requires the ill-defined analytical continuation from the imaginary- to the real-frequency domain. It was recently proposed [Phys. Rev. B 99, 035120 (2019)] that the internal Matsubara summations of any interaction-expansion diagram can be performed analytically by using symbolic algebra algorithms. The result of the summations is then an analytical function of the complex frequency rather than Matsubara frequency. Here we apply this principle and develop a diagrammatic Monte Carlo technique which yields results directly on the real-frequency axis. We present results for the self-energy $Σ(ω)$ of the doped 32x32 cyclic square-lattice Hubbard model in a non-trivial parameter regime, where signatures of the pseudogap appear close to the antinode. We discuss the behavior of the perturbation series on the real-frequency axis and in particular show that one must be very careful when using the maximum entropy method on truncated perturbation series. Our approach holds great promise for future application in cases when analytical continuation is difficult and moderate-order perturbation theory may be sufficient to converge the result.
△ Less
Submitted 15 January, 2020; v1 submitted 30 August, 2019;
originally announced August 2019.
-
First demonstration of 200, 100, and 50 um pitch Resistive AC-Coupled Silicon Detectors (RSD) with 100% fill-factor for 4D particle tracking
Authors:
M. Mandurrino,
R. Arcidiacono,
M. Boscardin,
N. Cartiglia,
G. F. Dalla Betta,
M. Ferrero,
F. Ficorella,
L. Pancheri,
G. Paternoster,
F. Siviero,
M. Tornago
Abstract:
We designed, produced, and tested RSD (Resistive AC-Coupled Silicon Detectors) devices, an evolution of the standard LGAD (Low-Gain Avalanche Diode) technology where a resistive n-type implant and a coupling dielectric layer have been implemented. The first feature works as a resistive sheet, freezing the multiplied charges, while the second one acts as a capacitive coupling for readout pads. We s…
▽ More
We designed, produced, and tested RSD (Resistive AC-Coupled Silicon Detectors) devices, an evolution of the standard LGAD (Low-Gain Avalanche Diode) technology where a resistive n-type implant and a coupling dielectric layer have been implemented. The first feature works as a resistive sheet, freezing the multiplied charges, while the second one acts as a capacitive coupling for readout pads. We succeeded in the challenging goal of obtaining very fine pitch (50, 100, and 200 um) while maintaining the signal waveforms suitable for high timing and 4D-tracking performances, as in the standard LGAD-based devices.
△ Less
Submitted 23 September, 2019; v1 submitted 7 July, 2019;
originally announced July 2019.