-
Memory effects on the current induced propagation of spin textures in NdCo$_5$/Ni$_8$Fe$_2$ bilayers
Authors:
Victoria Vega Fernández,
Alicia Estela Herguedas-Alonso,
Javier Hermosa,
Lucía Aballe,
Andrea Sorrentino,
Ricardo Valcarcel,
Carlos Quiros,
Jose Ignacio Martín,
Eva Pereiro,
Salvador Ferrer,
Aurelio Hierro-Rodríguez,
María Vélez
Abstract:
Bilayers of NdCo$_5$/Ni$_8$Fe$_2$ can act as reconfigurable racetracks thanks to the parallel stripe domain configuration present in the hard magnetic material with weak perpendicular anisotropy (NdCo$_5$), and its imprint on the soft magnetic layer (Ni$_8$Fe$_2$). This pattern hosts spin textures with well defined topological charges and establishes paths for their deterministic propagation under…
▽ More
Bilayers of NdCo$_5$/Ni$_8$Fe$_2$ can act as reconfigurable racetracks thanks to the parallel stripe domain configuration present in the hard magnetic material with weak perpendicular anisotropy (NdCo$_5$), and its imprint on the soft magnetic layer (Ni$_8$Fe$_2$). This pattern hosts spin textures with well defined topological charges and establishes paths for their deterministic propagation under the effect of pulsed currents, which has been studied as a function of externally applied fields by using Magnetic Transmission X-ray Microscopy. The experiments show guided vortex/antivortex propagation events within the Ni$_8$Fe$_2$ above a threshold current of $3\cdot10^{11}$ A/m$^2$. Opposite propagation senses have been observed depending on the topological charge of the spin texture, both in the remnant state and under an applied external field. Micromagnetic simulations of our multilayer reveal that the guiding effect and asymmetric propagation sense are due to the magnetic history of the hard magnetic layer. An exchange-bias-based memory effect acts as a magnetic spring and controls the propagation sense by favoring a specific orientation of the in plane magnetization, leading to a system which behaves as a hard-soft magnetic composite with reconfigurable capabilities for a controlled propagation of magnetic topological textures.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Hyperbolic Bloch points in ferrimagnetic exchange spring
Authors:
Javier Hermosa-Muñoz,
Aurelio Hierro-Rodríguez,
Andrea Sorrentino,
José I. Martín,
Luis M. Alvarez-Prado,
Eva Pereiro,
Carlos Quirós,
María Velez,
Salvador Ferrer
Abstract:
Bloch points in magnetic materials are attractive entities in view of magnetic information transport. Here, Bloch point configuration has been investigated and experimentally determined in a magnetic trilayer ($Gd_{12}Co_{88}/Nd_{17}Co_{83}/Gd_{24}Co_{76}$) with carefully adjusted composition within the ferrimagnetic $Gd_{x}Co_{1-x}$ alloys in order to engineer saturation magnetization, exchange l…
▽ More
Bloch points in magnetic materials are attractive entities in view of magnetic information transport. Here, Bloch point configuration has been investigated and experimentally determined in a magnetic trilayer ($Gd_{12}Co_{88}/Nd_{17}Co_{83}/Gd_{24}Co_{76}$) with carefully adjusted composition within the ferrimagnetic $Gd_{x}Co_{1-x}$ alloys in order to engineer saturation magnetization, exchange length, and interlayer couplings (ferromagnetic vs antiferromagnetic). X-ray vector magnetic tomography has allowed us to determine experimentally Bloch point polarity (related to topological charge) and Bloch point helicity $γ$ (determined by magnetostatic energy). At the bottom layer (close to the ferromagnetic interface), Bloch points adopt a standard circulating configuration with helicity $γ$ close to $π/2$. Within the top layer (with much lower saturation magnetization), Bloch points nucleate within a Neel-like exchange spring domain wall created by the antiferromagnetic coupling and adopt an uncommon hyperbolic configuration, characterized by much larger helicity angles. Our results indicate a path for Bloch point engineering in future applications adjusting material parameters and domain wall characteristics.
△ Less
Submitted 15 December, 2023;
originally announced December 2023.
-
Topological magnetic dipoles and emergent field bundles in a ferromagnetic microstructure by X-ray magnetic vector tomography
Authors:
Javier Hermosa,
Aurelio Hierro-Rodriguez,
Carlos Quirós,
José I. Martin,
Andrea Sorrentino,
Lucia Aballe,
Eva Pereiro,
Maria Vélez,
Salvador Ferrer
Abstract:
Advanced vector imaging techniques provide us with 3D maps of magnetization fields in which topological concepts can be directly applied to describe real-space experimental textures in non-ideal geometries. Here, the 3D magnetization of a low symmetry permalloy microstructure is obtained by X-ray vector magnetic tomography and analysed in detail in terms of topological charges and emergent fields.…
▽ More
Advanced vector imaging techniques provide us with 3D maps of magnetization fields in which topological concepts can be directly applied to describe real-space experimental textures in non-ideal geometries. Here, the 3D magnetization of a low symmetry permalloy microstructure is obtained by X-ray vector magnetic tomography and analysed in detail in terms of topological charges and emergent fields. A central asymmetric domain wall with a complex 3D structure is observed in which magnetization chirality transitions are mediated by Bloch points arranged in several dipoles and a triplet. The ideal spherical symmetry of the emergent field of an isolated monopole is severely modified due to shape effects of the permalloy microstructure. Emergent field lines aggregate into bundles that either connect adjacent Bloch points within a topological dipole or tend towards the surface. These bundles may present different textures such as helical vortices or half merons, depending on asymmetries and confinement, but are constrained by topological charge conservation in a given sample volume. This precise description of the singularities in realistic systems, enabled by the quantitative experimental information on magnetization vector fields, can significantly improve our understanding of topological constraints in 3D magnetic systems and provide advancements in the design of magnetic devices.
△ Less
Submitted 6 June, 2022;
originally announced June 2022.
-
Adjustable 3D magnetic configuration in ferrimagnetic multilayers with competing interactions visualized by soft X-ray vector tomography
Authors:
J. Hermosa-Muñoz,
A. Hierro-Rodríguez,
A. Sorrentino,
J. I. Martín,
L. M. Alvarez-Prado,
S. Rehbein,
E. Pereiro,
C. Quirós,
M. Vélez,
S. Ferrer
Abstract:
Soft X-ray magnetic vector tomography has been used to visualize with unprecedented detail and solely from experimental data the 3D magnetic configuration of a ferrimagnetic Gd12Co88/Nd17Co83/Gd24Co76 multilayer with competing anisotropy, exchange and magnetostatic interactions at different depths. The trilayer displays magnetic stripe domains, arranged in a chevron pattern, which are imprinted fr…
▽ More
Soft X-ray magnetic vector tomography has been used to visualize with unprecedented detail and solely from experimental data the 3D magnetic configuration of a ferrimagnetic Gd12Co88/Nd17Co83/Gd24Co76 multilayer with competing anisotropy, exchange and magnetostatic interactions at different depths. The trilayer displays magnetic stripe domains, arranged in a chevron pattern, which are imprinted from the central Nd17Co83 into the bottom Gd12Co88 layer with a distorted closure domain structure across the thickness. Near the top Gd24Co76 layer, local exchange springs with out-of-plane magnetization reversal, modulated ripple patterns and magnetic vortices and antivortices across the thickness are observed. The detailed analysis of the magnetic tomogram shows that the effective strength of the exchange spring at the NdCo/GdCo interface can be finely tuned by GdxCo1-x composition and anisotropy (determined by sample fabrication) and in-plane stripe orientation (adjustable), demonstrating the capability of 3D magnetic visualization techniques in magnetic engineering research.
△ Less
Submitted 9 September, 2021;
originally announced September 2021.
-
Creation and confirmation of Hopfions in magnetic multilayer systems
Authors:
N. Kent,
N. Reynolds,
D. Raftrey,
I. T. G. Campbell,
S. Virasawmy,
S. Dhuey,
R. V. Chopdekar,
A. Hierro-Rodriguez,
A. Sorrentino,
E. Pereiro,
S. Ferrer,
F. Hellman,
P. Sutcliffe,
P. Fischer
Abstract:
Topological solitons have been studied for decades in classical field theories, and have started recently to impact condensed matter physics. Among those solitons, magnetic skyrmions are two-dimensional particle-like objects with a continuous winding of the magnetization, and magnetic Hopfions are three-dimensional topological solitons that can be formed from a closed loop of a twisted skyrmion st…
▽ More
Topological solitons have been studied for decades in classical field theories, and have started recently to impact condensed matter physics. Among those solitons, magnetic skyrmions are two-dimensional particle-like objects with a continuous winding of the magnetization, and magnetic Hopfions are three-dimensional topological solitons that can be formed from a closed loop of a twisted skyrmion string. Whereas intense research is underway with magnetic skyrmions towards a fundamental understanding and potential applications in advanced storage and logic devices, the experimental creation and confirmation of magnetic Hopfions has been elusive so far. Theoretical models suggest that Hopfions can be stabilized in frustrated or chiral magnetic systems, and that target skymions can be transformed into Hopfions by adapting their perpendicular magnetic anisotropy. Here, we present experimental evidence of magnetic Hopfions that were created in magnetic Ir/Co/Pt multilayers shaped into nanoscale disks, which are known to host target skyrmions. The three-dimensional spin texture, which distinguishes magnetic Hopfions from target skyrmions was confirmed by combining two advanced element-specific magnetic X-ray microscopy techniques with about 20-30nm lateral resolution, using X-ray magnetic circular dichroism effect as magnetic contrast mechanism in surface-sensitive X-ray photoemission electron microscopy and bulk-sensitive soft x-ray transmission microscopy. We anticipate that these results will stimulate further investigations of Hopfions with different topologies and their potential application in three-dimensional spintronics devices.
△ Less
Submitted 16 October, 2020;
originally announced October 2020.
-
Artificial double-helix for geometrical control of magnetic chirality
Authors:
Dédalo Sanz-Hernández,
Aurelio Hierro-Rodriguez,
Claire Donnelly,
Javier Pablo-Navarro,
Andrea Sorrentino,
Eva Pereiro,
César Magén,
Stephen McVitie,
José María de Teresa,
Salvador Ferrer,
Peter Fischer,
Amalio Fernández-Pacheco
Abstract:
Chirality plays a major role in nature, from particle physics to DNA, and its control is much sought-after due to the scientific and technological opportunities it unlocks. For magnetic materials, chiral interactions between spins promote the formation of sophisticated swirling magnetic states such as skyrmions, with rich topological properties and great potential for future technologies. Currentl…
▽ More
Chirality plays a major role in nature, from particle physics to DNA, and its control is much sought-after due to the scientific and technological opportunities it unlocks. For magnetic materials, chiral interactions between spins promote the formation of sophisticated swirling magnetic states such as skyrmions, with rich topological properties and great potential for future technologies. Currently, chiral magnetism requires either a restricted group of natural materials or synthetic thin-film systems that exploit interfacial effects. Here, using state-of-the-art nanofabrication and magnetic X-ray microscopy, we demonstrate the imprinting of complex chiral spin states via three-dimensional geometric effects at the nanoscale. By balancing dipolar and exchange interactions in an artificial ferromagnetic double-helix nanostructure, we create magnetic domains and domain walls with a well-defined spin chirality, determined solely by the chiral geometry. We further demonstrate the ability to create confined 3D spin textures and topological defects by locally interfacing geometries of opposite chirality. The ability to create chiral spin textures via 3D nano-patterning alone enables exquisite control over the properties and location of complex topological magnetic states, of great importance for the development of future metamaterials and devices in which chirality provides enhanced functionality.
△ Less
Submitted 20 January, 2020;
originally announced January 2020.
-
Water-methanol solutions characterized by liquid $μ$-jet XPS and DFT; the methanol hydration case
Authors:
Eric Pellegrin,
Virginia Perez-Dieste,
Carlos Escudero,
Jordi Fraxedas,
Pawel Rejmak,
Nahikari Gonzalez,
Abel Fontsere,
Jordi Prat,
Salvador Ferrer
Abstract:
The advent of liquid $μ$-jet setups as proposed by Faubel and Winter in conjunction with X-ray Photoemission Spectroscopy (XPS) has opened up a large variety of experimental possibilities in the field of atomic and molecular physics. In this study, we present first results from a synchrotron-based XPS core level and valence band electron spectroscopy study on water (10$^{-4}$M aqueous NaCl solutio…
▽ More
The advent of liquid $μ$-jet setups as proposed by Faubel and Winter in conjunction with X-ray Photoemission Spectroscopy (XPS) has opened up a large variety of experimental possibilities in the field of atomic and molecular physics. In this study, we present first results from a synchrotron-based XPS core level and valence band electron spectroscopy study on water (10$^{-4}$M aqueous NaCl solution) as well as a water-methanol mixture using the newly commissioned ALBA liquid $μ$-jet setup. The experimental results are compared with simulations from density functional theory (DFT) regarding the electronic structure of single molecules, pure molecular clusters, and mixed clusters configurations as well as previous experimental studies. We give a detailed interpretation of the core level and valence band spectra for the vapour and liquid phases of both sample systems. The resulting overall picture gives insight into the water-methanol concentrations of the vapour and liquid phases as well as into the local electronic structure of the pertinent molecular clusters under consideration, with a special emphasis on methanol as the simplest amphiphilic molecule capable of creating hydrogen bonds.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Chiral asymmetry detected in a 2D array of permalloy square nanomagnets using circularly polarized X ray Resonant Magnetic Scattering
Authors:
J. Díaz,
P. Gargiani,
C. Quirós,
C. Redondo,
R. Morales,
L. M. Álvarez-Prado,
J. I. Martín,
A. Scholl,
S. Ferrer,
M. Vélez,
S. M. Valvidares
Abstract:
The sensitivity of Circularly polarized X ray Resonant Magnetic Scattering (CXRMS) to chiral asymmetry has been demonstrated. The study was performed on a 2D array of Permalloy (Py) square nanomagnets of 700 nm lateral size arranged in a chess lattice of 1000 nm lattice parameter. Previous X ray Magnetic Circular Dichroism Photoemission Electron microscopy (XMCD-PEEM) images on this sample showed…
▽ More
The sensitivity of Circularly polarized X ray Resonant Magnetic Scattering (CXRMS) to chiral asymmetry has been demonstrated. The study was performed on a 2D array of Permalloy (Py) square nanomagnets of 700 nm lateral size arranged in a chess lattice of 1000 nm lattice parameter. Previous X ray Magnetic Circular Dichroism Photoemission Electron microscopy (XMCD-PEEM) images on this sample showed the formation of vortices at remanence and a preference in their chiral state. The magnetic hysteresis loops of the array along the diagonal axis of the squares indicate a non-negligible and anisotropic interaction between vortices. The intensity of the magnetic scattering using circularly polarized light along one of the diagonal axes of the square magnets becomes asymmetric in intensity in the direction transversal to the incident plane at fields where the vortex states are formed. The asymmetry sign is inverted when the direction of the applied magnetic field is inverted. The result is the expected in the presence of an unbalanced chiral distribution. The effect is observed by CXRMS due to the interference between the charge scattering and the magnetic scattering.
△ Less
Submitted 16 September, 2019; v1 submitted 3 July, 2019;
originally announced July 2019.
-
Revealing 3D Magnetization of Thin Films with Soft X-ray Tomography: Closure Domains and Magnetic Singularities
Authors:
A. Hierro-Rodriguez,
C. Quirós,
A. Sorrentino,
L. M. Alvarez-Prado,
J. I. Martín,
J. M. Alameda,
S. McVitie,
E. Pereiro,
M. Vélez,
S. Ferrer
Abstract:
The knowledge of how the magnetization looks inside a ferromagnet is often hindered by the limitations of the available experimental methods that are sensitive only to the surface regions or limited in spatial resolution. We report the 3D tomographic reconstruction of the magnetization within a ferromagnetic film of 240 nm in thickness using soft X ray microscopy and magnetic dichroism. The film h…
▽ More
The knowledge of how the magnetization looks inside a ferromagnet is often hindered by the limitations of the available experimental methods that are sensitive only to the surface regions or limited in spatial resolution. We report the 3D tomographic reconstruction of the magnetization within a ferromagnetic film of 240 nm in thickness using soft X ray microscopy and magnetic dichroism. The film has periodic magnetic domains forming stripes and closure domains found to be shifted from the stripe array by 1/4 of the period. In addition, the bifurcations of the stripes, which act as inversion nuclei of the magnetization, evidence in 3D meron singularities and Bloch points at the interior of the film. This novel method can be easily extended to magnetic stacks in spintronics applications and other singularities in films.
△ Less
Submitted 12 February, 2020; v1 submitted 2 July, 2019;
originally announced July 2019.
-
Alternative Angle-Based Approach to the KS-Map. An Interpretation Through Symmetry and Reduction
Authors:
Sebastian Ferrer,
Francisco Crespo
Abstract:
The $\mathcal{KS}$ map is revisited in terms of an $S^1$-action in $T^*\mathbb{H}_0$ with the bilinear function as the associated momentum map. Indeed, the $\mathcal{KS}$ transformation maps the $S^1$-fibers related to the mentioned action to single points. By means of this perspective a second twin-bilinear function is obtained with an analogous $S^1$-action. We also show that the connection betw…
▽ More
The $\mathcal{KS}$ map is revisited in terms of an $S^1$-action in $T^*\mathbb{H}_0$ with the bilinear function as the associated momentum map. Indeed, the $\mathcal{KS}$ transformation maps the $S^1$-fibers related to the mentioned action to single points. By means of this perspective a second twin-bilinear function is obtained with an analogous $S^1$-action. We also show that the connection between the 4-D isotropic harmonic oscillator and the spatial Kepler systems can be done in a straightforward way after regularization and through the extension to 4 degrees of freedom of the Euler angles, when the bilinear relation is imposed. This connection incorporates both bilinear functions among the variables. We will show that an alternative regularization separates the oscillator expressed in Projective Euler variables. This setting takes advantage of the two bilinear functions and another integral of the system including them among a new set of variables that allows to connect the 4-D isotropic harmonic oscillator and the planar Kepler system. In addition, our approach makes transparent that only when we refer to rectilinear solutions, both bilinear relations defining the $\mathcal{KS}$ transformations are needed.
△ Less
Submitted 22 November, 2017;
originally announced November 2017.
-
On the N-Extended Euler System I. Generalized Jacobi Elliptic Functions
Authors:
Sebastián Ferrer,
Francisco Crespo,
Francisco Javier Molero
Abstract:
We study the integrable system of first order differential equations $ω_i(v)'=α_i\,\prod_{j\neq i}ω_j(v)$, $(1\!\leq i, j\leq\! N)$ as an initial value problem, with real coefficients $α_i$ and initial conditions $ω_i(0)$. The analysis is based on its quadratic first integrals. For each dimension $N$, the system defines a family of functions, generically hyperelliptic functions. When $N=3$, this s…
▽ More
We study the integrable system of first order differential equations $ω_i(v)'=α_i\,\prod_{j\neq i}ω_j(v)$, $(1\!\leq i, j\leq\! N)$ as an initial value problem, with real coefficients $α_i$ and initial conditions $ω_i(0)$. The analysis is based on its quadratic first integrals. For each dimension $N$, the system defines a family of functions, generically hyperelliptic functions. When $N=3$, this system generalizes the classic Euler system for the reduced flow of the free rigid body problem, thus we call it $N$-extended Euler system ($N$-EES). In this Part I the cases $N=4$ and $N=5$ are studied, generalizing Jacobi elliptic functions which are defined as a 3-EES. Taking into account the nested structure of the $N$-EES, we propose reparametrizations of the type ${\rm d}v^*=g(ω_i)\,{\rm d}v$ that separate geometry from dynamic. Some of those parametrizations turn out to be generalization of the {\sl Jacobi amplitude}. In Part II we consider geometric properties of the $N$-system and the numeric computation of the functions involved. It will be published elsewhere.
△ Less
Submitted 22 May, 2015;
originally announced May 2015.
-
Expanding the simple pendulum's rotation solution in action-angle variables
Authors:
Martin Lara,
Sebastián Ferrer
Abstract:
Integration of Hamiltonian systems by reduction to action-angle variables has proven to be a successful approach. However, when the solution depends on elliptic functions the transformation to action-angle variables may need to remain in implicit form. This is exactly the case of the simple pendulum, where in order to make explicit the transformation to action-angle variables one needs to resort t…
▽ More
Integration of Hamiltonian systems by reduction to action-angle variables has proven to be a successful approach. However, when the solution depends on elliptic functions the transformation to action-angle variables may need to remain in implicit form. This is exactly the case of the simple pendulum, where in order to make explicit the transformation to action-angle variables one needs to resort to nontrivial expansions of special functions and series reversion. Alternatively, it is shown that the explicit expansion of the transformation to action-angle variables can be constructed directly, and that this direct construction leads naturally to the Lie transforms method, in this way avoiding the intricacies related to the traditional expansion of elliptic functions.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
Poisson and symplectic reductions of 4-DOF isotropic oscillators. The van der Waals system as benchmark
Authors:
Francisco Crespo,
Gema María Díaz-Toca,
Sebastián Ferrer,
Martín Lara
Abstract:
This paper is devoted to studying Hamiltonian oscillators in 1:1:1:1 resonance with symmetries, which include several models of perturbed Keplerian systems. Normal forms are computed in Poisson and symplectic formalisms, by mean of invariants and Lie-transforms respectively. The first procedure relies on the quadratic invariants associated to the symmetries, and is carried out using Gröbner bases.…
▽ More
This paper is devoted to studying Hamiltonian oscillators in 1:1:1:1 resonance with symmetries, which include several models of perturbed Keplerian systems. Normal forms are computed in Poisson and symplectic formalisms, by mean of invariants and Lie-transforms respectively. The first procedure relies on the quadratic invariants associated to the symmetries, and is carried out using Gröbner bases. In the symplectic approach, hinging on the maximally superintegrable character of the isotropic oscillator, the normal form is computed {\it a la} Delaunay, using a generalization of those variables for 4-DOF systems. Due to the symmetries of the system, isolated as well as circles of stationary points and invariant tori should be expected. These solutions manifest themselves rather differently in both approaches, due to the constraints among the invariants versus the singularities associated to the Delaunay chart.
Taking the generalized van der Waals family as a benchmark, the explicit expression of the Delaunay normalized Hamiltonian up to the second order is presented, showing that it may be extended to higher orders in a straightforward way. The search for the relative equilibria is used for comparison of their main features of both treatments. The pros and cons are given in detail for some values of the parameter and the integrals.
△ Less
Submitted 7 February, 2015;
originally announced February 2015.
-
A Classical Morphological Analysis of Galaxies in the Spitzer Survey of Stellar Structure in Galaxies (S4G)
Authors:
R. Buta,
K. Sheth,
E. Athanassoula,
A. Bosma,
J. Knapen,
E. Laurikainen,
H. Salo,
D. Elmegreen,
L. Ho,
D. Zaritsky,
H. Courtois,
J. Hinz,
J-C. Muñoz-Mateos,
T. Kim,
M. Regan,
D. Gadotti,
A. Gil de Paz,
J. Laine,
K. Menendez-Delmestre,
Sebastien Comeron,
S. Erroz Ferrer,
M. Seibert,
T. Mizusawa,
B. Holwerda,
B. Madore
Abstract:
The Spitzer Survey of Stellar Structure in Galaxies (S4G) is the largest available database of deep, homogeneous middle-infrared (mid-IR) images of galaxies of all types. The survey, which includes 2352 nearby galaxies, reveals galaxy morphology only minimally affected by interstellar extinction. This paper presents an atlas and classifications of S4G galaxies in the Comprehensive de Vaucouleurs r…
▽ More
The Spitzer Survey of Stellar Structure in Galaxies (S4G) is the largest available database of deep, homogeneous middle-infrared (mid-IR) images of galaxies of all types. The survey, which includes 2352 nearby galaxies, reveals galaxy morphology only minimally affected by interstellar extinction. This paper presents an atlas and classifications of S4G galaxies in the Comprehensive de Vaucouleurs revised Hubble-Sandage (CVRHS) system. The CVRHS system follows the precepts of classical de Vaucouleurs (1959) morphology, modified to include recognition of other features such as inner, outer, and nuclear lenses, nuclear rings, bars, and disks, spheroidal galaxies, X patterns and box/peanut structures, OLR subclass outer rings and pseudorings, bar ansae and barlenses, parallel sequence late-types, thick disks, and embedded disks in 3D early-type systems. We show that our CVRHS classifications are internally consistent, and that nearly half of the S4G sample consists of extreme late-type systems (mostly bulgeless, pure disk galaxies) in the range Scd-Im. The most common family classification for mid-IR types S0/a to Sc is SA while that for types Scd to Sm is SB. The bars in these two type domains are very different in mid-IR structure and morphology. This paper examines the bar, ring, and type classification fractions in the sample, and also includes several montages of images highlighting the various kinds of "stellar structures" seen in mid-IR galaxy morphology.
△ Less
Submitted 18 January, 2015; v1 submitted 2 January, 2015;
originally announced January 2015.
-
Early type galaxies with tidal debris and their scaling relations in the Spitzer Survey of Stellar Structure in Galaxies (S4G)
Authors:
Taehyun Kim,
Kartik Sheth,
Joannah L. Hinz,
Myung Gyoon Lee,
Dennis Zaritsky,
Dimitri A. Gadotti,
Johan H. Knapen,
Eva Schinnerer,
Luis C. Ho,
Eija Laurikainen,
Heikki Salo,
E. Athanassoula,
Albert Bosma,
Bonita de Swardt,
Juan-Carlos Muñoz-Mateos,
Barry F. Madore,
Sébastien Comerón,
Michael W. Regan,
Karín Menéndez-Delmestre,
Armando Gil de Paz,
Mark Seibert,
Jarkko Laine,
Santiago Erroz Ferrer,
Trisha Mizusawa
Abstract:
Tidal debris around galaxies can yield important clues on their evolution. We have identified tidal debris in 11 early type galaxies (T \leq 0) from a sample of 65 early types drawn from the Spitzer Survey of Stellar Structure in Galaxies (S4G). The tidal debris includes features such as shells, ripples and tidal tails. A variety of techniques, including two-dimensional decomposition of galactic s…
▽ More
Tidal debris around galaxies can yield important clues on their evolution. We have identified tidal debris in 11 early type galaxies (T \leq 0) from a sample of 65 early types drawn from the Spitzer Survey of Stellar Structure in Galaxies (S4G). The tidal debris includes features such as shells, ripples and tidal tails. A variety of techniques, including two-dimensional decomposition of galactic structures, was used to quantify the residual tidal features. The tidal debris contributes ~3 - 10% to the total 3.6 μm luminosity of the host galaxy. Structural parameters of the galaxies were estimated using two-dimensional profile fitting. We investigate the locations of galaxies with tidal debris in the Fundamental Plane and Kormendy relation. We find that galaxies with tidal debris lie within the scatter of early type galaxies without tidal features. Assuming that the tidal debris is indicative of recent gravitational interaction or merger, this suggests that these galaxies have either undergone minor merging events so that the overall structural properties of the galaxies are not significantly altered, or they have undergone a major merging events but already have experienced sufficient relaxation and phase-mixing so that their structural properties become similar to those of the non-interacting early type galaxies.
△ Less
Submitted 17 April, 2012;
originally announced April 2012.
-
Integration of the Euler-Poinsot Problem in New Variables
Authors:
Martin Lara,
Sebastián Ferrer
Abstract:
The essentially unique reduction of the Euler-Poinsot problem may be performed in different sets of variables. Action-angle variables are usually preferred because of their suitability for approaching perturbed rigid-body motion. But they are just one among the variety of sets of canonical coordinates that integrate the problem. We present an alternate set of variables that, while allowing for sim…
▽ More
The essentially unique reduction of the Euler-Poinsot problem may be performed in different sets of variables. Action-angle variables are usually preferred because of their suitability for approaching perturbed rigid-body motion. But they are just one among the variety of sets of canonical coordinates that integrate the problem. We present an alternate set of variables that, while allowing for similar performances than action-angles in the study of perturbed problems, show an important advantage over them: Their transformation from and to Andoyer variables is given in explicit form.
△ Less
Submitted 31 December, 2010;
originally announced January 2011.
-
The Projective Andoyer transformation and the connection between the 4-D isotropic oscillator and Kepler systems
Authors:
Sebastián Ferrer
Abstract:
Extending to 4 degrees of freedom a symplectomorphism used in attitude dynamics it is shown in a direct way the connection between the 4-D isotropic harmonic oscillator and the 3-D Kepler systems. This approach made transparent that only when we refer to rectilinear solutions, the {\sl bilinear relation} defining the KS transformation is needed.
Extending to 4 degrees of freedom a symplectomorphism used in attitude dynamics it is shown in a direct way the connection between the 4-D isotropic harmonic oscillator and the 3-D Kepler systems. This approach made transparent that only when we refer to rectilinear solutions, the {\sl bilinear relation} defining the KS transformation is needed.
△ Less
Submitted 12 November, 2010;
originally announced November 2010.
-
Families of Canonical Transformations by Hamilton-Jacobi-Poincaré equation. Application to Rotational and Orbital Motion
Authors:
Sebastián Ferrer,
Martin Lara
Abstract:
The Hamilton-Jacobi equation in the sense of Poincaré, i.e. formulated in the extended phase space and including regularization, is revisited building canonical transformations with the purpose of Hamiltonian reduction. We illustrate our approach dealing with orbital and attitude dynamics. Based on the use of Whittaker and Andoyer symplectic charts, for which all but one coordinates are cyclic i…
▽ More
The Hamilton-Jacobi equation in the sense of Poincaré, i.e. formulated in the extended phase space and including regularization, is revisited building canonical transformations with the purpose of Hamiltonian reduction. We illustrate our approach dealing with orbital and attitude dynamics. Based on the use of Whittaker and Andoyer symplectic charts, for which all but one coordinates are cyclic in the Hamilton-Jacobi equation, we provide whole families of canonical transformations, among which one recognizes the familiar ones used in orbital and attitude dynamics. In addition, new canonical transformations are demonstrated.
△ Less
Submitted 18 November, 2009; v1 submitted 29 June, 2009;
originally announced June 2009.
-
Order-disorder transition driven by dynamical effects between the Sn/Ge(111)-($3\times3$) and $(\sqrt{3}\times\sqrt{3})R30^{\circ}$ phases
Authors:
J. Avila,
A. Mascaraque,
G. Le Lay,
E. G. Michel,
M. Gothelid,
H. Ascolani,
J. Alvarez,
S. Ferrer,
M. C. Asensio
Abstract:
This paper was withdrawn by the authors.
This paper was withdrawn by the authors.
△ Less
Submitted 4 December, 2003; v1 submitted 13 April, 2001;
originally announced April 2001.
