-
Stacking-engineered ferroelectricity and multiferroic order in van der Waals magnets
Authors:
Daniel Bennett,
Gabriel Martínez-Carracedo,
Xu He,
Jaime Ferrer,
Philippe Ghosez,
Riccardo Comin,
Efthimios Kaxiras
Abstract:
Two-dimensional (2D) materials that exhibit spontaneous magnetization, polarization or strain (referred to as ferroics) have the potential to revolutionize nanotechnology by enhancing the multifunctionality of nanoscale devices. However, multiferroic order is difficult to achieve, requiring complicated coupling between electron and spin degrees of freedom. We propose a universal method to engineer…
▽ More
Two-dimensional (2D) materials that exhibit spontaneous magnetization, polarization or strain (referred to as ferroics) have the potential to revolutionize nanotechnology by enhancing the multifunctionality of nanoscale devices. However, multiferroic order is difficult to achieve, requiring complicated coupling between electron and spin degrees of freedom. We propose a universal method to engineer multiferroics from van der Waals magnets by taking advantage of the fact that changing the stacking between 2D layers can break inversion symmetry, resulting in ferroelectricity and possibly magnetoelectric coupling. We illustrate this concept using first-principles calculations in bilayer NiI$_2$, which can be made ferroelectric upon rotating two adjacent layers by $180^{\circ}$ with respect to the bulk stacking. Furthermore, we discover a novel multiferroic order induced by interlayer charge transfer which couples the interlayer spin order and electronic polarization. Our approach is not only general but also systematic, and can enable the discovery of a wide variety of 2D multiferroics.
△ Less
Submitted 31 May, 2024; v1 submitted 30 May, 2024;
originally announced May 2024.
-
Solution of the mean-field Hubbard model of graphene rectangulenes
Authors:
Amador García-Fuente,
Jaime Ferrer
Abstract:
We present a complete analytical solution of the mean-field Hubbard model of undoped and doped graphene rectangulenes. These are non-chiral ribbons of arbitrary length and width, whose dimensions range from simple short acene molecules all the way up to the bulk limit. We rewrite the Hubbard model in the basis of bulk and edge non-interacting eigen-states, and provide explicit expressions for the…
▽ More
We present a complete analytical solution of the mean-field Hubbard model of undoped and doped graphene rectangulenes. These are non-chiral ribbons of arbitrary length and width, whose dimensions range from simple short acene molecules all the way up to the bulk limit. We rewrite the Hubbard model in the basis of bulk and edge non-interacting eigen-states, and provide explicit expressions for the Coulomb matrix elements. We present a general mean-field decoupling of the Hamiltonian, and discuss in detail the paramagnetic, ferromagnetic and antiferromagnetic mean-field solutions. We calculate the eigen-energies, occupations, spin densities and addition energies of rectangulenes with lengths and widths ranging from a nanometer to several hundreds of them. We rewrite the exact mean-field tight-binding Hamiltonian back in the site-occupation basis, that can be used to model electronic, thermo-electric, transport and optical properties of experimental-size graphene flakes.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Comparing Hyper-optimized Machine Learning Models for Predicting Efficiency Degradation in Organic Solar Cells
Authors:
David Valiente,
Fernando Rodríguez-Mas,
Juan V. Alegre-Requena,
David Dalmau,
Juan C. Ferrer
Abstract:
This work presents a set of optimal machine learning (ML) models to represent the temporal degradation suffered by the power conversion efficiency (PCE) of polymeric organic solar cells (OSCs) with a multilayer structure ITO/PEDOT:PSS/P3HT:PCBM/Al. To that aim, we generated a database with 996 entries, which includes up to 7 variables regarding both the manufacturing process and environmental cond…
▽ More
This work presents a set of optimal machine learning (ML) models to represent the temporal degradation suffered by the power conversion efficiency (PCE) of polymeric organic solar cells (OSCs) with a multilayer structure ITO/PEDOT:PSS/P3HT:PCBM/Al. To that aim, we generated a database with 996 entries, which includes up to 7 variables regarding both the manufacturing process and environmental conditions for more than 180 days. Then, we relied on a software framework that brings together a conglomeration of automated ML protocols that execute sequentially against our database by simply command-line interface. This easily permits hyper-optimizing and randomizing seeds of the ML models through exhaustive benchmarking so that optimal models are obtained. The accuracy achieved reaches values of the coefficient determination (R2) widely exceeding 0.90, whereas the root mean squared error (RMSE), sum of squared error (SSE), and mean absolute error (MAE)>1% of the target value, the PCE. Additionally, we contribute with validated models able to screen the behavior of OSCs never seen in the database. In that case, R2~0.96-0.97 and RMSE~1%, thus confirming the reliability of the proposal to predict. For comparative purposes, classical Bayesian regression fitting based on non-linear mean squares (LMS) are also presented, which only perform sufficiently for univariate cases of single OSCs. Hence they fail to outperform the breadth of the capabilities shown by the ML models. Finally, thanks to the standardized results offered by the ML framework, we study the dependencies between the variables of the dataset and their implications for the optimal performance and stability of the OSCs. Reproducibility is ensured by a standardized report altogether with the dataset, which are publicly available at Github.
△ Less
Submitted 10 June, 2024; v1 submitted 29 March, 2024;
originally announced April 2024.
-
Axion-Polaritons in quark stars: a possible solution to the missing pulsar problem
Authors:
E. J. Ferrer,
V. de la Incera
Abstract:
This paper proposes an alternative mechanism to solve the so-called missing pulsar problem, a standing paradox between the theoretical expectations about the number of pulsars that should exist in the galaxy center of the Milky Way and their absence in the observations. The mechanism is based on the transformation of incident $γ$ rays into hybridized modes, known as axion-polaritons, which can exi…
▽ More
This paper proposes an alternative mechanism to solve the so-called missing pulsar problem, a standing paradox between the theoretical expectations about the number of pulsars that should exist in the galaxy center of the Milky Way and their absence in the observations. The mechanism is based on the transformation of incident $γ$ rays into hybridized modes, known as axion-polaritons, which can exist inside highly magnetized quark stars with a quark matter phase known as the magnetic dual chiral density wave phase. This phase, which is favored over several other dense matter phases candidates at densities a few times nuclear saturation density, has already passed several important astrophysical tests. In the proposed mechanism, the absence of young magnetars occurs because as electromagnetic waves inside the star can only propagate through the hybridized modes, incident photons coming from a $γ$-ray burst get transformed into massless and massive axion polaritons by the Primakoff effect. Once thermalized, the massive axion-polaritons can self-gravitate up to a situation where their total mass overpasses the Chandrasekhar limit for these bosons, producing a mini blackhole that collapses the star.
△ Less
Submitted 24 March, 2024;
originally announced March 2024.
-
Automatizing Software Cognitive Complexity Reduction through Integer Linear Programming
Authors:
Rubén Saborido,
Javier Ferrer,
Francisco Chicano
Abstract:
Reducing the cognitive complexity of a piece of code to a given threshold is not trivial. Recently, we modeled software cognitive complexity reduction as an optimization problem and we proposed an approach to assist developers on this task. This approach enumerates sequences of code extraction refactoring operations until a stop** criterion is met. As a result, it returns the minimal sequence of…
▽ More
Reducing the cognitive complexity of a piece of code to a given threshold is not trivial. Recently, we modeled software cognitive complexity reduction as an optimization problem and we proposed an approach to assist developers on this task. This approach enumerates sequences of code extraction refactoring operations until a stop** criterion is met. As a result, it returns the minimal sequence of code extraction refactoring operations that is able to reduce the cognitive complexity of a code to the given threshold. However, exhaustive enumeration algorithms fail to scale with the code size. The number of refactoring plans can grow exponentially with the number of lines of code. In this paper, instead of enumerating sequences of code extraction refactoring operations, we model the cognitive complexity reduction as an Integer Linear Programming problem. This opens the door to the use of efficient solvers to find optimal solutions in large programs.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
CMSA algorithm for solving the prioritized pairwise test data generation problem in software product lines
Authors:
Javier Ferrer,
Francisco Chicano,
José Antonio Ortega Toro
Abstract:
In Software Product Lines (SPLs) it may be difficult or even impossible to test all the products of the family because of the large number of valid feature combinations that may exist. Thus, we want to find a minimal subset of the product family that allows us to test all these possible combinations (pairwise). Furthermore, when testing a single product is a great effort, it is desirable to first…
▽ More
In Software Product Lines (SPLs) it may be difficult or even impossible to test all the products of the family because of the large number of valid feature combinations that may exist. Thus, we want to find a minimal subset of the product family that allows us to test all these possible combinations (pairwise). Furthermore, when testing a single product is a great effort, it is desirable to first test products composed of a set of priority features. This problem is called Prioritized Pairwise Test Data Generation Problem.
State-of-the-art algorithms based on Integer Linear Programming for this problema are faster enough for small and medium instances. However, there exists some real instances that are too large to be computed with these algorithms in a reasonable time because of the exponential growth of the number of candidate solutions. Also, these heuristics not always lead us to the best solutions. In this work we propose a new approach based on a hybrid metaheuristic algorithm called Construct, Merge, Solve & Adapt. We compare this matheuristic with four algorithms: a Hybrid algorithm based on Integer Linear Programming ((HILP), a Hybrid algorithm based on Integer Nonlinear Programming (HINLP), the Parallel Prioritized Genetic Solver (PPGS), and a greedy algorithm called prioritized-ICPL. The analysis reveals that CMSA results in statistically significantly better quality solutions in most instances and for most levels of weighted coverage, although it requires more execution time.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Impact of family-friendly HRM policies in organizational performance
Authors:
Jose Maria Biedma Ferrer,
Jose Aurelio Medina Garrido
Abstract:
Purpose: The objective of this work is to analyze the impact of implementing work-family reconciliation measures on workers' perception and how this can influence their behavior, especially in their organizational performance. Design/methodology/approach: A literature review and the main research works related to the work-family conflict and reconciliation measures to overcome this conflict have b…
▽ More
Purpose: The objective of this work is to analyze the impact of implementing work-family reconciliation measures on workers' perception and how this can influence their behavior, especially in their organizational performance. Design/methodology/approach: A literature review and the main research works related to the work-family conflict and reconciliation measures to overcome this conflict have been conducted to draw conclusions about their impact on worker performance. Contributions and results: This work proposes an integrative model that shows the existing relationships between work-family reconciliation and perceptual variables on one side, and those related to the worker's organizational behavior on the other. Perceptual variables such as stress, job satisfaction, and motivation are analyzed. Regarding variables related to the worker's organizational behavior, absenteeism, turnover, and performance are analyzed. The results of the analysis provide evidence that the existence of work-family reconciliation is perceived favorably by workers and improves their organizational behavior, especially their performance. Originality/Added value: This study integrates different perspectives related to the conflict and work-family reconciliation, from an eclectic vision. Thus, it contributes to existing literature with a more comprehensive approach to the investigated topic. Additionally, the proposed integrative model allows for useful conclusions for management from both a purely human resources management perspective and organizational productivity improvement. Keywords: Work-family conflict, work-family reconciliation, perceptual variables, organizational performance, human resources managements
△ Less
Submitted 14 December, 2023; v1 submitted 24 November, 2023;
originally announced November 2023.
-
Conformal TiO$_2$ aerogel-like films by plasma deposition: from omniphobic antireflective coatings to perovskite solar cells photoelectrodes
Authors:
Jose M. Obrero,
Lidia Contreras-Bernal,
Francisco J. Aparicio,
Teresa C. Rojas,
Francisco J. Ferrer,
Noe Orozco,
Zineb Saghi,
Triana Czermak,
Jose M. Pedrosa,
Carmen Lopez-Santos,
Kostya,
Ostrikov,
Ana Borras,
Juan Ramon Sanchez-Valencia,
Angel Barranco
Abstract:
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by spin-coating-based wet chemical methods. Besides, special techniques such as supercritical drying are required to replace the pore liquid with air while mainta…
▽ More
The ability to control porosity in oxide thin films is one of the key factors that determine their properties. Despite the abundance of dry processes for the synthesis of oxide porous layers, the high porosity range is typically achieved by spin-coating-based wet chemical methods. Besides, special techniques such as supercritical drying are required to replace the pore liquid with air while maintaining the porous network. In this study, we propose a new method for the fabrication of ultra-porous titanium dioxide thin films at room or mild temperatures (T lower or equal to 120 degrees Celsius) by the sequential process involving plasma deposition and etching. These films are conformal to the substrate topography even for high-aspect-ratio substrates and show percolated porosity values above 85 percent that are comparable to advanced aerogels. The films deposited at room temperature are amorphous. However, they become partly crystalline at slightly higher temperatures presenting a distribution of anatase clusters embedded in the sponge-like structure. Surprisingly, the porous structure remains after annealing the films at 450 degrees Celsius in air, which increases the fraction of the embedded anatase nanocrystals. The films are antireflective, omniphobic, and photoactive becoming super-hydrophilic subjected to UV light irradiation The supported percolated nanoporous structure can be used as an electron-conducting electrode in perovskite solar cells. The properties of the cells depend on the aerogel film thickness reaching efficiencies close to those of commercial mesoporous anatase electrodes. This generic solvent-free synthesis is scalable and is applicable to ultra-high porous conformal oxides of different compositions with potential applications in photonics, optoelectronics, energy storage, and controlled wetting.
△ Less
Submitted 17 November, 2023;
originally announced November 2023.
-
Landslide Topology Uncovers Failure Movements
Authors:
Kamal Rana,
Kushanav Bhuyan,
Joaquin Vicente Ferrer,
Fabrice Cotton,
Ugur Ozturk,
Filippo Catani,
Nishant Malik
Abstract:
The death toll and monetary damages from landslides continue to rise despite advancements in predictive modeling. The predictive capability of these models is limited as landslide databases used in training and assessing the models often have crucial information missing, such as underlying failure types. Here, we present an approach for identifying failure types based on their movements, e.g., sli…
▽ More
The death toll and monetary damages from landslides continue to rise despite advancements in predictive modeling. The predictive capability of these models is limited as landslide databases used in training and assessing the models often have crucial information missing, such as underlying failure types. Here, we present an approach for identifying failure types based on their movements, e.g., slides and flows by leveraging 3D landslide topology. We observe topological proxies reveal prevalent signatures of mass movement mechanics embedded in the landslide's morphology or shape, such as detecting coupled movement styles within complex landslides. We find identical failure types exhibit similar topological properties, and by using them as predictors, we can identify failure types in historic and event-specific landslide databases (including multi-temporal) from various geomorphological and climatic contexts such as Italy, the US Pacific Northwest region, Denmark, Turkey, and China with 80 to 94 % accuracy. To demonstrate the real-world application of the method, we implement it in two undocumented datasets from China and publicly release the datasets. These new insights can considerably improve the performance of landslide predictive models and impact assessments. Moreover, our work introduces a new paradigm for studying landslide shapes to understand underlying processes through the lens of landslide topology.
△ Less
Submitted 14 October, 2023;
originally announced October 2023.
-
Relativistic magnetic interactions from non-orthogonal basis sets
Authors:
Gabriel Martínez-Carracedo,
László Oroszlány,
Amador García-Fuente,
Bendegúz Nyári,
László Udvardi,
László Szunyogh,
Jaime Ferrer
Abstract:
We propose a method to determine the magnetic exchange interaction and on-site anisotropy tensors of extended Heisenberg spin models from density functional theory including relativistic effects. The method is based on the Liechtenstein-Katsnelson-Antropov-Gubanov torque formalism, whereby energy variations upon infinitesimal rotations are performed. We assume that the Kohn-Sham Hamiltonian is exp…
▽ More
We propose a method to determine the magnetic exchange interaction and on-site anisotropy tensors of extended Heisenberg spin models from density functional theory including relativistic effects. The method is based on the Liechtenstein-Katsnelson-Antropov-Gubanov torque formalism, whereby energy variations upon infinitesimal rotations are performed. We assume that the Kohn-Sham Hamiltonian is expanded in a non-orthogonal basis set of pseudo-atomic orbitals. We define local operators that are both hermitian and satisfy relevant sum rules. We demonstrate that in the presence of spin-orbit coupling a correct map** from the density functional total energy to a spin model that relies on the rotation of the exchange field part of the Hamiltonian can not be accounted for by transforming the full Hamiltonian. We derive a set of sum rules that pose stringent validity tests on any specific calculation. We showcase the flexibility and accuracy of the method by computing the exchange and anisotropy tensors of both well-studied magnetic nanostructures and of recently synthesized two-dimensional magnets. Specifically, we benchmark our approach against the established Korringa-Kohn-Rostoker Green's function method and show that they agree well. Finally, we demonstrate how the application of biaxial strain on the two-dimensional magnet T-CrTe2 can trigger a magnetic phase transition.
△ Less
Submitted 19 December, 2023; v1 submitted 5 September, 2023;
originally announced September 2023.
-
Thermal phonon fluctuations and stability of the magnetic dual chiral density wave phase in dense QCD
Authors:
E. J Ferrer,
W. Gyory,
V. de la Incera
Abstract:
We study the stability against thermal phonon fluctuations of the magnetic dual chiral density wave (MDCDW) phase, an inhomogeneous phase arising in cold dense QCD in a magnetic field. Following a recent study that demonstrated the absence of the Landau-Peierls (LP) instability from this phase, we calculate the (threshold) temperature at which the phonon fluctuations wash out the long-range order…
▽ More
We study the stability against thermal phonon fluctuations of the magnetic dual chiral density wave (MDCDW) phase, an inhomogeneous phase arising in cold dense QCD in a magnetic field. Following a recent study that demonstrated the absence of the Landau-Peierls (LP) instability from this phase, we calculate the (threshold) temperature at which the phonon fluctuations wash out the long-range order over a range of magnetic fields and densities relevant to astrophysical applications. Using a high-order Ginzburg-Landau expansion, we find that the threshold temperature is very near the critical temperature for fields of order $10^{18}$ G, and still a sizable fraction of the critical temperature for fields of order $10^{17}$ G. Therefore, at sufficiently large magnetic fields, the long-range order of the MDCDW phase is preserved over most of the parameter space where it is energetically favored; at smaller magnetic fields, the long-range order is still preserved over a considerable region of parameter space relevant to compact stars. We provide general symmetry arguments to explain why a magnetic field alone is not enough to eliminate the LP instability that characterizes single-modulated phases in 3+1 dimensions.
△ Less
Submitted 24 March, 2024; v1 submitted 11 July, 2023;
originally announced July 2023.
-
GHz sample excitation at the ALBA-PEEM
Authors:
Muhammad Waqas Khaliq,
José M. Álvarez,
Antonio Camps,
Nahikari González,
José Ferrer,
Ana Martinez-Carboneres,
Jordi Prat,
Sandra Ruiz-Gómez,
Miguel Angel Niño,
Ferran Macià,
Lucia Aballe,
Michael Foerster
Abstract:
We describe a setup that is used for high-frequency electrical sample excitation in a cathode lens electron microscope with the sample stage at high voltage as used in many synchrotron light sources. Electrical signals are transmitted by dedicated high-frequency components to the printed circuit board supporting the sample. Sub-miniature push-on connectors (SMP) are used to realize the connection…
▽ More
We describe a setup that is used for high-frequency electrical sample excitation in a cathode lens electron microscope with the sample stage at high voltage as used in many synchrotron light sources. Electrical signals are transmitted by dedicated high-frequency components to the printed circuit board supporting the sample. Sub-miniature push-on connectors (SMP) are used to realize the connection in the ultra-high vacuum chamber, bypassing the standard feedthrough. A bandwidth up to 4 GHz with -6 dB attenuation was measured at the sample position, which allows to apply sub-nanosecond pulses. We describe different electronic sample excitation schemes and demonstrate a spatial resolution of 56 nm employing the new setup.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
Full analytical solution of finite-length armchair/zigzag nanoribbons
Authors:
A. García-Fuente,
D. Carrascal,
G. Ross,
J. Ferrer
Abstract:
Finite-length armchair graphene nanoribbons can behave as one dimensional topological materials, that may show edge states in their zigzag-terminated edges, depending on their width and termination. We show here a full solution of Tight-Binding graphene rectangles of any length and width that can be seen as either finite-length armchair or zigzag ribbons. We find exact analytical expressions for b…
▽ More
Finite-length armchair graphene nanoribbons can behave as one dimensional topological materials, that may show edge states in their zigzag-terminated edges, depending on their width and termination. We show here a full solution of Tight-Binding graphene rectangles of any length and width that can be seen as either finite-length armchair or zigzag ribbons. We find exact analytical expressions for both bulk and edge eigen-states and eigen-energies. We write down exact expressions for the Coulomb interactions among edge states and introduce a Hubbard-dimer model to analyse the emergence and features of different magnetic states at the edges, whose existence depends on the ribbon length. We find ample room for experimental testing of our predictions in N = 5 armchair ribbons. We compare the analytical results with ab initio simulations to benchmark the quality of the dimer model and to set its parameters. A further detailed analysis of the ab initio Hamiltonian allows us to identify those variations of the Tight-Binding parameters that affect the topological properties of the ribbons.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
A-BASE-DE-PROS: una implementación práctica de los Objetivos de Desarrollo Sostenible en la Universidad Politécnica de Madrid
Authors:
Patricia Almendros,
Silvia Otegui,
Alejandro Nares,
Laura del Fresno,
Javier Ablanque,
Irene Blanco,
Juan Ramón Ferrer,
Sonia Benito,
Carmen Lopez,
Sonia García,
León Fernández,
Sergio Zubelzu,
Raúl Sánchez,
Paloma Esteve,
Rosa María Benito,
Juan Carlos Losada,
Antonio Saa,
Gabriel Gascó,
Ana M. Méndez,
Mónica Montoya,
Marina de Francisco,
Jesús Ruiz,
Samuel Seoanez,
Sara Castilla,
Dámaris Fuente
, et al. (24 additional authors not shown)
Abstract:
The influence of the Sustainable Development Goals (SDGs) has been widely spread over the last years, establishing new public and privat policies. Education has also been experiencing this change by aligning with the previous goals. In this chapter, we briefly summarize the main activities conducted under the Grant APS22.2003 'Service-based learning of the SDGs related to a responsible production…
▽ More
The influence of the Sustainable Development Goals (SDGs) has been widely spread over the last years, establishing new public and privat policies. Education has also been experiencing this change by aligning with the previous goals. In this chapter, we briefly summarize the main activities conducted under the Grant APS22.2003 'Service-based learning of the SDGs related to a responsible production and consumption (A-BASE-DE-PROS)', which uses the SDG 12 as a guide line to raise the awareness of the importance of the 2030 Agenda among undergraduate and secondary-school students. In general, the service-based learning has increased the knowledge of the SDGs among the students. Furthermore, most of the (university and secondary) students found the service-learning
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Measurement of the $^{14}$N(n,p)$^{14}$C cross section at the CERN n_TOF facility from sub-thermal energy to 800 keV
Authors:
P. Torres-Sánchez,
J. Praena,
I. Porras,
M. Sabaté-Gilarte,
C. Lederer-Woods,
O. Aberle,
V. Alcayne,
S. Amaducci,
J. Andrzejewski,
L. Audouin,
V. Bécares,
V. Babiano-Suarez,
M. Bacak,
M. Barbagallo,
F. Bečvář,
G. Bellia,
E. Berthoumieux,
J. Billowes,
D. Bosnar,
A. Brown,
M. Busso,
M. Caamaño,
L. Caballero,
F. Calviño,
M. Calviani
, et al. (107 additional authors not shown)
Abstract:
Background: The $^{14}$N(n,p)$^{14}$C reaction is of interest in neutron capture therapy, where nitrogen-related dose is the main component due to low-energy neutrons, and in astrophysics, where 14N acts as a neutron poison in the s-process. Several discrepancies remain between the existing data obtained in partial energy ranges: thermal energy, keV region and resonance region. Purpose: Measuring…
▽ More
Background: The $^{14}$N(n,p)$^{14}$C reaction is of interest in neutron capture therapy, where nitrogen-related dose is the main component due to low-energy neutrons, and in astrophysics, where 14N acts as a neutron poison in the s-process. Several discrepancies remain between the existing data obtained in partial energy ranges: thermal energy, keV region and resonance region. Purpose: Measuring the 14N(n,p)14C cross section from thermal to the resonance region in a single measurement for the first time, including characterization of the first resonances, and providing calculations of Maxwellian averaged cross sections (MACS). Method: Time-of-flight technique. Experimental Area 2 (EAR-2) of the neutron time-of-flight (n_TOF) facility at CERN. $^{10}$B(n,$α$)$^7$Li and $^{235}$U(n,f) reactions as references. Two detection systems running simultaneously, one on-beam and another off-beam. Description of the resonances with the R-matrix code sammy. Results: The cross section has been measured from sub-thermal energy to 800 keV resolving the two first resonances (at 492.7 and 644 keV). A thermal cross-section (1.809$\pm$0.045 b) lower than the two most recent measurements by slightly more than one standard deviation, but in line with the ENDF/B-VIII.0 and JEFF-3.3 evaluations has been obtained. A 1/v energy dependence of the cross section has been confirmed up to tens of keV neutron energy. The low energy tail of the first resonance at 492.7 keV is lower than suggested by evaluated values, while the overall resonance strength agrees with evaluations. Conclusions: Our measurement has allowed to determine the $^{14}$N(n,p) cross-section over a wide energy range for the first time. We have obtained cross-sections with high accuracy (2.5 %) from sub-thermal energy to 800 keV and used these data to calculate the MACS for kT = 5 to kT = 100 keV.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Relevance of Shockley states on the electrical and thermoelectric response of gold-based single-molecule junctions
Authors:
Saúl Sánchez-González,
Amador García-Fuente,
Jaime Ferrer
Abstract:
Noble metals break preferably exposing (111)-oriented surfaces, that host Shockley type surface states (SSs). Nevertheless, the relevance of SSs on the electrical properties of gold-based molecular junctions has not been explored in detail yet. Here, we present ab initio simulations that show how the gold (111) SS, that lies approximately 0.5 eV below the Fermi energy, is key to determining correc…
▽ More
Noble metals break preferably exposing (111)-oriented surfaces, that host Shockley type surface states (SSs). Nevertheless, the relevance of SSs on the electrical properties of gold-based molecular junctions has not been explored in detail yet. Here, we present ab initio simulations that show how the gold (111) SS, that lies approximately 0.5 eV below the Fermi energy, is key to determining correctly the electrical and thermoelectric response of the above junctions. We show how the ability to shift in a controlled way the energy position of gold SS enables us to tune the electrical and thermoelectric response of gold molecular junctions. We also show that gold's SS appears in our simulations only if the 5d orbitals are included explicitly in the valence shell. To illustrate this behaviour, we discuss in detail Benzenediamine (BDA) and Benzenedicarbonitrile (BDCN) gold (111) junctions.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
Electrically driven singlet-triplet transition in triangulene spin-1 chains
Authors:
Gabriel Martínez-Carracedo,
László Oroszlány,
Amador García-Fuente,
László Szunyogh,
Jaime Ferrer
Abstract:
Recently, graphene triangulene chains have been synthesized and their magnetic response has been analyzed by STM methods by Mishra and coworkers (Nature 598, 287 (2021)). Motivated by this study, we determine the exchange bilinear and biquadratic constants of the triangulene chains by calculating two-spin rotations in the spirit of the magnetic force theorem. We then analyze open-ended, odd-number…
▽ More
Recently, graphene triangulene chains have been synthesized and their magnetic response has been analyzed by STM methods by Mishra and coworkers (Nature 598, 287 (2021)). Motivated by this study, we determine the exchange bilinear and biquadratic constants of the triangulene chains by calculating two-spin rotations in the spirit of the magnetic force theorem. We then analyze open-ended, odd-numbered chains, whose edge states pair up forming a triplet ground state. We propose three experimental approaches that enable us to trigger and control a singlet-triplet spin transition. Two of these methods are based on applying a mechanical distortion to the chain. We finally show that the transition can be controlled efficiently by the application of an electric field.
△ Less
Submitted 16 February, 2023; v1 submitted 27 July, 2022;
originally announced July 2022.
-
darfix: Data analysis for dark-field X-ray microscopy
Authors:
Júlia Garriga Ferrer,
Raquel Rodríguez-Lamas,
Henri Payno,
Wout De Nolf,
Phil Cook,
Vicente Armando Solé Jover,
Vincent Favre-Nicolin,
Can Yıldırım,
Carsten Detlefs
Abstract:
A Python package for the analysis of dark-field X-ray microscopy (DFXM) and rocking curve imaging (RCI) data is presented. \textit{darfix} provides a set of data processing and visualization tools that can be either imported as library components or accessed through a graphical user interface (GUI) as an Orange add-on. In the latter case, the different analysis modules can be easily chained to def…
▽ More
A Python package for the analysis of dark-field X-ray microscopy (DFXM) and rocking curve imaging (RCI) data is presented. \textit{darfix} provides a set of data processing and visualization tools that can be either imported as library components or accessed through a graphical user interface (GUI) as an Orange add-on. In the latter case, the different analysis modules can be easily chained to define computational workflows. Operations on larger-than-memory image sets are supported through the implementation of online versions of the data processing algorithms, effectively trading performance for feasibility when the computing resources are limited. The software can automatically extract the relevant instrument angle settings from the input files metadata. The currently available input file format is EDF and in future releases HDF5 will be incorporated.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
Speed of Sound for Hadronic and Quark Phases in a Magnetic Field
Authors:
E. J. Ferrer,
A. Hackebill
Abstract:
In this paper we calculate the speed of sound for three phases that may exist inside a magnetized hybrid neutron star at different density regions: A hadronic phase at low densities, quark-matter in the magnetic dual chiral density wave (MDCDW) phase at intermediate densities and a free-quark phase modeled by the MIT bag model at higher densities. It is found that the speed of sound exhibits a non…
▽ More
In this paper we calculate the speed of sound for three phases that may exist inside a magnetized hybrid neutron star at different density regions: A hadronic phase at low densities, quark-matter in the magnetic dual chiral density wave (MDCDW) phase at intermediate densities and a free-quark phase modeled by the MIT bag model at higher densities. It is found that the speed of sound exhibits a non-monotonic behavior, that goes from values smaller than the conformal limit ($c_s^2 < 1/3$) in the hadronic phase, to peak ($c_s^2 > 1/3$) in the MDCDW phase, to finally reach the conformal limit ($c_s^2 \sim 1/3$) at higher densities for quarks in the MIT bag model. Also, the anisotropic speed of sound in the presence of a magnetic field is derived from first principles. This is a consequence of the anisotropy in the system's pressures produced by the breaking of the rotational symmetry in the presence of a magnetic field. The role played by the lowest Landau level contribution in affecting the speed of sound in the magnetized phases is discussed.
△ Less
Submitted 17 January, 2023; v1 submitted 30 March, 2022;
originally announced March 2022.
-
Magnetic Dual Chiral Density Wave: A Candidate Quark Matter Phase for the Interior of Neutron Stars
Authors:
E. J. Ferrer,
V. de la Incera
Abstract:
In this review, we discuss the physical characteristics of the magnetic dual chiral density wave (MDCDW) phase of dense quark matter and argued why it is a promising candidate for the interior matter phase of neutron stars. The MDCDW condensate occurs in the presence of a magnetic field. It is a single-modulated chiral density wave characterized by two dynamically generated parameters: the fermion…
▽ More
In this review, we discuss the physical characteristics of the magnetic dual chiral density wave (MDCDW) phase of dense quark matter and argued why it is a promising candidate for the interior matter phase of neutron stars. The MDCDW condensate occurs in the presence of a magnetic field. It is a single-modulated chiral density wave characterized by two dynamically generated parameters: the fermion quasiparticle mass $m$ and the condensate spatial modulation $q$. The lowest Landau level quasiparticle modes in the MDCDW system are asymmetric about the zero energy, a fact that leads to the topological properties and anomalous electric transport exhibited by this phase. The topology makes the MDCDW phase robust against thermal phonon fluctuations, and as such, it does not display the Landau-Peierls instability, a stapled feature of single-modulated inhomogeneous chiral condensates in three dimensions. The topology is also reflected in the presence of the electromagnetic chiral anomaly in the effective action and in the formation of hybridized propagating modes known as an axion-polaritons. Taking into account that one of the axion-polaritons of this quark phase is gapped, we argued how incident $γ$-ray photons can be converted into gapped axion-polaritons in the interior of a magnetar star in the MDCDW phase leading the star to collapse, a phenomenon that can serve to explain the so-called missing pulsar problem in the galactic center.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
LOS: Local-Optimistic Scheduling of Periodic Model Training For Anomaly Detection on Sensor Data Streams in Meshed Edge Networks
Authors:
Soeren Becker,
Florian Schmidt,
Lauritz Thamsen,
Ana Juan Ferrer,
Odej Kao
Abstract:
Anomaly detection is increasingly important to handle the amount of sensor data in Edge and Fog environments, Smart Cities, as well as in Industry 4.0. To ensure good results, the utilized ML models need to be updated periodically to adapt to seasonal changes and concept drifts in the sensor data. Although the increasing resource availability at the edge can allow for in-situ execution of model tr…
▽ More
Anomaly detection is increasingly important to handle the amount of sensor data in Edge and Fog environments, Smart Cities, as well as in Industry 4.0. To ensure good results, the utilized ML models need to be updated periodically to adapt to seasonal changes and concept drifts in the sensor data. Although the increasing resource availability at the edge can allow for in-situ execution of model training directly on the devices, it is still often offloaded to fog devices or the cloud.
In this paper, we propose Local-Optimistic Scheduling (LOS), a method for executing periodic ML model training jobs in close proximity to the data sources, without overloading lightweight edge devices. Training jobs are offloaded to nearby neighbor nodes as necessary and the resource consumption is optimized to meet the training period while still ensuring enough resources for further training executions. This scheduling is accomplished in a decentralized, collaborative and opportunistic manner, without full knowledge of the infrastructure and workload. We evaluated our method in an edge computing testbed on real-world datasets. The experimental results show that LOS places the training executions close to the input sensor streams, decreases the deviation between training time and training period by up to 40% and increases the amount of successfully scheduled training jobs compared to an in-situ execution.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
One-reactor vacuum and plasma synthesis of transparent conducting oxide nanotubes and nanotrees: from single wire conductivity to ultra-broadband perfect absorbers in the NIR
Authors:
Javier Castillo-Seoane,
Jorge Gil-Rostra,
Victor Lopez-Flores,
Gabriel Lozano,
F. Javier Ferrer,
Juan P. Espinos,
Kostya Ostrikov,
Francisco Yubero,
Agustin R. Gonzalez-Elipe,
Angel Barranco,
Juan R. Sanchez-Valencia,
Ana Borras
Abstract:
The eventual exploitation of one-dimensional nanomaterials yet needs the development of scalable, high yield, homogeneous, and environmentally friendly methods able to meet the requirements for the fabrication of under design functional nanomaterials. In this article, we demonstrate a vacuum and plasma one-reactor approach for the synthesis of the fundamental common element in solar energy and opt…
▽ More
The eventual exploitation of one-dimensional nanomaterials yet needs the development of scalable, high yield, homogeneous, and environmentally friendly methods able to meet the requirements for the fabrication of under design functional nanomaterials. In this article, we demonstrate a vacuum and plasma one-reactor approach for the synthesis of the fundamental common element in solar energy and optoelectronics, i.e. the transparent conducting electrode but in the form of nanotubes and nanotrees architectures. Although the process is generic and can be used for a variety of TCOs and wide-bandgap semiconductors, we focus herein on Indium Doped Tin Oxide (ITO) as the most extended in the previous applications. This protocol combines widely applied deposition techniques such as thermal evaporation for the formation of organic nanowires serving as 1D and 3D soft templates, deposition of polycrystalline layers by magnetron sputtering, and removal of the template by simply annealing under mild vacuum conditions. The process variables are tuned to control the stoichiometry, morphology, and alignment of the ITO nanotubes and nanotrees. Four-probe characterization reveals the improved lateral connectivity of the ITO nanotrees and applied on individual nanotubes shows resistivities as low as 3.5 +/- 0.9 x 10-4 Ω.cm, a value comparable to single-crystalline counterparts. The assessment of diffuse reflectance and transmittance in the UV-VIS range confirms the viability of the supported ITO nanotubes as a random optical media working as strong scattering layers. Further ability to form ITO nanotrees opens the path for practical applications as ultra-broadband absorbers in the NIR. The demonstrated low resistivity and optical properties of these ITO nanostructures open the way for their use in LEDs, IR shield, energy harvesting, nanosensors, and photoelectrochemical applications
△ Less
Submitted 18 May, 2021;
originally announced May 2021.
-
Integrating van der Waals materials on paper substrates for electrical and optical applications
Authors:
Wenliang Zhang,
Qinghua Zhao,
Carmen Munuera,
Martin Lee,
Eduardo Flores,
João E. F. Rodrigues,
Jose R. Ares,
Carlos Sanchez,
Javier Gainza,
Herre S. J. van der Zant,
José A. Alonso,
Isabel J. Ferrer,
Tao Wang,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (v…
▽ More
Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (vdW) materials, many research groups have worked towards the integration of vdW materials-based devices on paper. Recently, a method to deposit a continuous film of densely packed interconnects of vdW materials on paper by simply rubbing the vdW crystals against the rough surface of paper has been presented. This method utilizes the weak interlayer vdW interactions and allows cleaving of the crystals into micro platelets through the abrasion against the paper. Here, we aim to illustrate the general character and the potential of this technique by fabricating films of 39 different vdW materials (including superconductors, semi-metals, semiconductors, and insulators) on standard copier paper. We have thoroughly characterized their optical properties showing their high optical quality: one can easily resolve the absorption band edge of semiconducting vdW materials and even the excitonic features present in some vdW materials with high exciton binding energy. We also measured the electrical resistivity for several vdW materials films on paper finding exceptionally low values, which are in some cases, orders of magnitude lower than those reported for analogous films produced by inkjet printing. We finally demonstrate the fabrication of field-effect devices with vdW materials on paper using the paper substrate as an ionic gate.
△ Less
Submitted 7 May, 2021;
originally announced May 2021.
-
Tidal deformability of strange stars and the GW170817 event
Authors:
Odilon Lourenço,
César H. Lenzi,
Mariana Dutra,
Efrain J. Ferrer,
Vivian de la Incera,
Laura Paulucci,
J. E. Horvath
Abstract:
In this work we consider strange stars formed by quark matter in the color-flavor-locked (CFL) phase of color superconductivity. The CFL phase is described by a Nambu-Jona-Lasinio model with four-fermion vector and diquark interaction channels. The effect of the color superconducting medium on the gluons are incorporated into the model by including the gluon self-energy in the thermodynamic potent…
▽ More
In this work we consider strange stars formed by quark matter in the color-flavor-locked (CFL) phase of color superconductivity. The CFL phase is described by a Nambu-Jona-Lasinio model with four-fermion vector and diquark interaction channels. The effect of the color superconducting medium on the gluons are incorporated into the model by including the gluon self-energy in the thermodynamic potential. We construct parametrizations of the model by varying the vector coupling $G_V$ and comparing the results to the data on tidal deformability from the GW170817 event, the observational data on maximum masses from massive pulsars such as the MSP J0740+6620, and the mass/radius fits to NICER data for PSR J003+0451. Our results points out to windows for the $G_V$ parameter space of the model, with and without gluon effects included, that are compatible with all these astrophysical constraints, namely, $0.21<G_V/G_S<0.4$, and $0.02<G_V/G_S<0.1$, respectively. We also observe a strong correlation between the tidal deformabilites of the GW170817 event and $G_V$. Our results indicate that strange stars cannot be ruled out in collisions of compact binaries from the structural point of view.
△ Less
Submitted 15 April, 2021;
originally announced April 2021.
-
Towards a Cognitive Compute Continuum: An Architecture for Ad-Hoc Self-Managed Swarms
Authors:
Ana Juan Ferrer,
Soeren Becker,
Florian Schmidt,
Lauritz Thamsen,
Odej Kao
Abstract:
In this paper we introduce our vision of a Cognitive Computing Continuum to address the changing IT service provisioning towards a distributed, opportunistic, self-managed collaboration between heterogeneous devices outside the traditional data center boundaries. The focal point of this continuum are cognitive devices, which have to make decisions autonomously using their on-board computation and…
▽ More
In this paper we introduce our vision of a Cognitive Computing Continuum to address the changing IT service provisioning towards a distributed, opportunistic, self-managed collaboration between heterogeneous devices outside the traditional data center boundaries. The focal point of this continuum are cognitive devices, which have to make decisions autonomously using their on-board computation and storage capacity based on information sensed from their environment. Such devices are moving and cannot rely on fixed infrastructure elements, but instead realise on-the-fly networking and thus frequently join and leave temporal swarms. All this creates novel demands for the underlying architecture and resource management, which must bridge the gap from edge to cloud environments, while kee** the QoS parameters within required boundaries. The paper presents an initial architecture and a resource management framework for the implementation of this type of IT service provisioning.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
Quark matter contribution to the heat capacity of magnetized neutron stars
Authors:
E. J. Ferrer,
V. de la Incera,
P. Sanson
Abstract:
In this paper, we find the heat capacity of the magnetic dual chiral density wave (MDCDW) phase of dense quark matter and use it to explore the feasibility of this phase for a neutron star interior. MDCDW is a spatially inhomogeneous phase of quark matter known to be favored at intermediate densities over the chirally symmetric phase and the color-flavor-locked superconducting phase. By comparing…
▽ More
In this paper, we find the heat capacity of the magnetic dual chiral density wave (MDCDW) phase of dense quark matter and use it to explore the feasibility of this phase for a neutron star interior. MDCDW is a spatially inhomogeneous phase of quark matter known to be favored at intermediate densities over the chirally symmetric phase and the color-flavor-locked superconducting phase. By comparing our result to the lower limit of the core heat capacity established from observations of transiently accreting neutron stars, we show that the heat capacity of MDCDW quark matter is well above that lower limit and hence cannot be ruled out. This result adds to a wealth of complementary investigations, all of which has served to strengthen the viability of a neutron star interior made of MDCDW quark matter. For completeness, we review the contributions to the heat capacity of the main neutron star ingredients at low, high and intermediate densities, with and without the presence of a magnetic field.
△ Less
Submitted 3 June, 2021; v1 submitted 11 January, 2021;
originally announced January 2021.
-
Raman Fingerprint of Pressure-Induced Phase Transitions in TiS3 Nanoribbons: Implications for Thermal Measurements under Extreme Stress Conditions
Authors:
K. K. Mishra,
T. R. Ravindran,
Joshua O. Island,
Eduardo Flores,
Jose Ramon Ares,
Carlos Sanchez,
Isabel J. Ferrer,
Herre S. J. van der Zant,
Amit Pawbake,
R. Kanawade,
Andres Castellanos-Gomez,
Dattatray J. Late
Abstract:
Two-dimensional layered trichalcogenide materials have recently attracted the attention of the scientific community because of its robust mechanical, thermal properties and applications in opto and nanoelectronics devices. We report the pressure dependence of out-of plane Ag Raman modes in high quality few-layers titanium trisulfide (TiS3) nanoribbons grown using a direct solid-gas reaction method…
▽ More
Two-dimensional layered trichalcogenide materials have recently attracted the attention of the scientific community because of its robust mechanical, thermal properties and applications in opto and nanoelectronics devices. We report the pressure dependence of out-of plane Ag Raman modes in high quality few-layers titanium trisulfide (TiS3) nanoribbons grown using a direct solid-gas reaction method and infer their cross-plane thermal expansion coefficient.Both mechanical stability and thermal properties of the TiS3 nanoribbons are elucidated using phonon-spectrum analyses. Raman spectroscopic studies at high pressure (up to 34 GPa) using a diamond anvil cell identify four prominent Ag Raman bands; a band at 557 cm-1 softens under compression, and others at 175, 300, and 370 cm-1 show normal hardening. Anomalies in phonon mode frequencies and excessive broadening in line-width of the soft phonon about ~ 13 GPa are attributed to the possible onset of a reversible structural transition. A complete structural phase transition at 43 GPa is inferred from Ag soft mode frequency (557 cm-1) versus pressure extrapolation curve, consistent with recent reported theoretical predictions. Using the experimental mode Grüneisen parameters i of Raman modes, the cross-plane thermal expansion coefficient Cv of the TiS3 nanoribbons at ambient phase is estimated to be1.32110-6K-1. The observed results are expected to be useful in calibration and performance of next generation nano-electronics and optical devices under extreme stress conditions.
△ Less
Submitted 25 November, 2020;
originally announced November 2020.
-
Hadron-Quark Phase Transition at Finite Density in the Presence of a Magnetic Field: Anisotropic Approach
Authors:
E. J. Ferrer,
A. Hackebill
Abstract:
We investigate the hadron-quark phase transition at finite density in the presence of a magnetic field taking into account the anisotropy created by a uniform magnetic field in the system's equations of state. We find a new anisotropic equilibrium condition that will drive the first-order phase transition along the boundary between the two phases. Fixing the magnetic field in the hadronic phase, t…
▽ More
We investigate the hadron-quark phase transition at finite density in the presence of a magnetic field taking into account the anisotropy created by a uniform magnetic field in the system's equations of state. We find a new anisotropic equilibrium condition that will drive the first-order phase transition along the boundary between the two phases. Fixing the magnetic field in the hadronic phase, the phase transition is realized by increasing the baryonic chemical potential at zero temperature. It is shown that the magnetic field is mildly boosted after the system transitions from the hadronic to the quark phase. The magnetic-field discontinuity between the two phases is supported by a surface density of magnetic monopoles, which accumulate at the boundary separating the two phases. The mechanism responsible for the monopole charge density generation is discussed. Each phase is found to be paramagnetic with higher magnetic susceptibility in the quark phase. The connection with the physics of neutron stars is highlighted through out the paper.
△ Less
Submitted 17 March, 2022; v1 submitted 20 October, 2020;
originally announced October 2020.
-
Axion-Polaritons in the Magnetic Dual Chiral Density Wave Phase of Dense QCD
Authors:
Efrain J. Ferrer,
Vivian de la Incera
Abstract:
We investigate the propagation of electromagnetic radiation in the magnetic dual chiral density wave (MDCDW) phase of dense quark matter. Considering the theory of low-energy fluctuations in this phase, we show how linearly polarized photons reaching the MDCDW medium couple to the fluctuation field to produce two hybridized modes of propagation that we call in analogy with similar phenomenon in co…
▽ More
We investigate the propagation of electromagnetic radiation in the magnetic dual chiral density wave (MDCDW) phase of dense quark matter. Considering the theory of low-energy fluctuations in this phase, we show how linearly polarized photons reaching the MDCDW medium couple to the fluctuation field to produce two hybridized modes of propagation that we call in analogy with similar phenomenon in condensed matter physics axion polaritons, one of them being gapless and the other gapped. The gapped mode's gap is proportional to the background magnetic field and inversely proportional to the amplitude of the inhomogeneous condensate. The generation of axion polaritons can be traced back to the presence of the chiral anomaly in the low-energy theory of the fluctuations. Considering the Primakoff effect in the MDCDW medium, we argued that axion polaritons can be generated inside quark stars bombarded by energetic photons coming from gamma-ray bursts and point out that this mechanism could serve to explain the missing pulsar paradox in the galaxy center.
△ Less
Submitted 15 August, 2023; v1 submitted 5 October, 2020;
originally announced October 2020.
-
Tunable Photodetectors via in situ Thermal Conversion of TiS$_3$ to TiO$_2$
Authors:
Foad Ghasemi,
Riccardo Frisenda,
Eduardo Flores,
Nikos Papadopoulos,
Robert Biele,
David Perez de Lara,
Herre S. J. van der Zant,
Kenji Watanabe,
Takashi Taniguchi,
Roberto D'Agosta,
Jose R. Ares,
Carlos Sánchez,
Isabel J. Ferrer,
Andres Castellanos-Gomez
Abstract:
In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semi…
▽ More
In two-dimensional materials research, oxidation is usually considered as a common source for the degradation of electronic and optoelectronic devices or even device failure. However, in some cases a controlled oxidation can open the possibility to widely tune the band structure of 2D materials. In particular, we demonstrate the controlled oxidation of titanium trisulfide (TiS$_3$), a layered semiconductor that has attracted much attention recently thanks to its quasi-1D electronic and optoelectronic properties and its direct bandgap of 1.1 eV. Heating TiS$_3$ in air above 300 °C gradually converts it into TiO$_2$, a semiconductor with a wide bandgap of 3.2 eV with ap-plications in photo-electrochemistry and catalysis. In this work, we investigate the controlled thermal oxidation of individual TiS$_3$ nanoribbons and its influence on the optoelectronic properties of TiS$_3$-based photodetectors. We observe a step-wise change in the cut-off wavelength from its pristine value ~1000 nm to 450 nm after subjecting the TiS$_3$ devices to subsequent thermal treatment cycles. Ab-initio and many-body calculations confirm an increase in the bandgap of titanium oxysulfide (TiO$_{2-x}$S$_x$) when increasing the amount of oxygen and reducing the amount of sulfur.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
SIESTA: recent developments and applications
Authors:
Alberto García,
Nick Papior,
Arsalan Akhtar,
Emilio Artacho,
Volker Blum,
Emanuele Bosoni,
Pedro Brandimarte,
Mads Brandbyge,
J. I. Cerdá,
Fabiano Corsetti,
Ramón Cuadrado,
Vladimir Dikan,
Jaime Ferrer,
Julian Gale,
Pablo García-Fernández,
V. M. García-Suárez,
Sandra García,
Georg Huhs,
Sergio Illera,
Richard Korytár,
Peter Koval,
Irina Lebedeva,
Lin Lin,
Pablo López-Tarifa,
Sara G. Mayo
, et al. (11 additional authors not shown)
Abstract:
A review of the present status, recent enhancements, and applicability of the SIESTA program is presented. Since its debut in the mid-nineties, SIESTA's flexibility, efficiency and free distribution has given advanced materials simulation capabilities to many groups worldwide. The core methodological scheme of SIESTA combines finite-support pseudo-atomic orbitals as basis sets, norm-conserving pse…
▽ More
A review of the present status, recent enhancements, and applicability of the SIESTA program is presented. Since its debut in the mid-nineties, SIESTA's flexibility, efficiency and free distribution has given advanced materials simulation capabilities to many groups worldwide. The core methodological scheme of SIESTA combines finite-support pseudo-atomic orbitals as basis sets, norm-conserving pseudopotentials, and a real-space grid for the representation of charge density and potentials and the computation of their associated matrix elements. Here we describe the more recent implementations on top of that core scheme, which include: full spin-orbit interaction, non-repeated and multiple-contact ballistic electron transport, DFT+U and hybrid functionals, time-dependent DFT, novel reduced-scaling solvers, density-functional perturbation theory, efficient Van der Waals non-local density functionals, and enhanced molecular-dynamics options. In addition, a substantial effort has been made in enhancing interoperability and interfacing with other codes and utilities, such as Wannier90 and the second-principles modelling it can be used for, an AiiDA plugin for workflow automatization, interface to Lua for steering SIESTA runs, and various postprocessing utilities. SIESTA has also been engaged in the Electronic Structure Library effort from its inception, which has allowed the sharing of various low level libraries, as well as data standards and support for them, in particular the PSML definition and library for transferable pseudopotentials, and the interface to the ELSI library of solvers. Code sharing is made easier by the new open-source licensing model of the program. This review also presents examples of application of the capabilities of the code, as well as a view of on-going and future developments.
△ Less
Submitted 1 June, 2020;
originally announced June 2020.
-
Multi-terminal electronic transport in boron nitride encapsulated TiS$_3$ nanosheets
Authors:
Nikos Papadopoulos,
Eduardo Flores,
Kenji Watanabe,
Takashi Taniguchi,
Jose R. Ares,
Carlos Sanchez,
Isabel J. Ferrer,
Andres Castellanos-Gomez,
Gary A. Steele,
Herre S. J. van der Zant
Abstract:
We have studied electrical transport as a function of carrier density, temperature and bias in multi-terminal devices consisting of hexagonal boron nitride (h-BN) encapsulated titanium trisulfide (TiS$_3$) sheets. Through the encapsulation with h-BN, we observe metallic behavior and high electron mobilities. Below $\sim$60 K an increase in the resistance, and non-linear transport with plateau-like…
▽ More
We have studied electrical transport as a function of carrier density, temperature and bias in multi-terminal devices consisting of hexagonal boron nitride (h-BN) encapsulated titanium trisulfide (TiS$_3$) sheets. Through the encapsulation with h-BN, we observe metallic behavior and high electron mobilities. Below $\sim$60 K an increase in the resistance, and non-linear transport with plateau-like features in the differential resistance are present, in line with the expected charge density wave (CDW) formation. Importantly, the critical temperature and the threshold field of the CDW phase can be controlled through the back-gate.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
A Mechanically Tunable Quantum Dot in a Graphene Break Junction
Authors:
Sabina Caneva,
Matthijs D. Hermans,
Martin Lee,
Amador Garcia-Fuente,
Kenji Watanabe,
Takashi Taniguchi,
Cees Dekker,
Jaime Ferrer,
Herre S. J. van der Zant,
Pascal Gehring
Abstract:
Graphene quantum dots (QDs) are intensively studied as platforms for the next generation of quantum electronic devices. Fine tuning of the transport properties in monolayer graphene QDs, in particular with respect to the independent modulation of the tunnel barrier transparencies, remains challenging and is typically addressed using electrostatic gating. We investigate charge transport in back-gat…
▽ More
Graphene quantum dots (QDs) are intensively studied as platforms for the next generation of quantum electronic devices. Fine tuning of the transport properties in monolayer graphene QDs, in particular with respect to the independent modulation of the tunnel barrier transparencies, remains challenging and is typically addressed using electrostatic gating. We investigate charge transport in back-gated graphene mechanical break junctions and reveal Coulomb blockade physics characteristic of a single, high-quality QD when a nanogap is opened in a graphene constriction. By mechanically controlling the distance across the newly-formed graphene nanogap, we achieve reversible tunability of the tunnel coupling to the drain electrode by five orders of magnitude, while kee** the source-QD tunnel coupling constant. These findings indicate that the tunnel coupling asymmetry can be significantly modulated with a mechanical tuning knob and has important implications for the development of future graphene-based devices, including energy converters and quantum calorimeters.
△ Less
Submitted 10 February, 2020;
originally announced February 2020.
-
Lack of Debye and Meissner screening in strongly magnetized quark matter at intermediate densities
Authors:
Bo Feng,
Efrain J. Ferrer,
Israel Portillo
Abstract:
We study the static responses of cold quark matter in the intermediate baryonic density region (characterized by a chemical potential $μ$) in the presence of a strong magnetic field. We consider in particular, the so-called Magnetic Dual Chiral Density Wave (MDCDW) phase, which is materialized by an inhomogeneous condensate formed by a particle-hole pair. It is shown, that the MDCDW phase is more…
▽ More
We study the static responses of cold quark matter in the intermediate baryonic density region (characterized by a chemical potential $μ$) in the presence of a strong magnetic field. We consider in particular, the so-called Magnetic Dual Chiral Density Wave (MDCDW) phase, which is materialized by an inhomogeneous condensate formed by a particle-hole pair. It is shown, that the MDCDW phase is more stable in the weak-coupling regime than the one considered in the magnetic catalysis of chiral symmetry braking phenomenon (MC$χ$SB) and even than the chiral symmetric phase that was expected to be realized at sufficiently high baryonic chemical potential. The different components of the photon polarization operator of the MDCDW phase in the one-loop approximation are calculated. We found that in the MDCDW phase there is no Debye screening neither Meissner effect in the lowest-Landau-level approximation. The obtained Debye length depends on the amplitude $m$ and modulation $b$ of the inhomogeneous condensate and it is only different from zero if the relation $| μ-b| > m$ holds. But, we found that in the region of interest this inequality is not satisfied. Thus, no Debye screening takes place under those conditions. On the other hand, since the particle-hole condensate is electrically neutral, the U(1) electromagnetic group is not broken by the ground state and consequently there is no Meissner effect. These results can be of interest for the astrophysics of neutron stars.
△ Less
Submitted 9 April, 2020; v1 submitted 8 January, 2020;
originally announced January 2020.
-
Magnetic Field Effect in the Fine-Structure Constant and Electron Dynamical Mass
Authors:
E. J. Ferrer,
A. Sanchez
Abstract:
We investigate the effect of an applied constant and uniform magnetic field in the fine-structure constant of massive and massless QED. In massive QED, it is shown that a strong magnetic field removes the so called Landau pole and that the fine-structure constant becomes anisotropic having different values along and transverse to the field direction. Contrary to other results in the literature, we…
▽ More
We investigate the effect of an applied constant and uniform magnetic field in the fine-structure constant of massive and massless QED. In massive QED, it is shown that a strong magnetic field removes the so called Landau pole and that the fine-structure constant becomes anisotropic having different values along and transverse to the field direction. Contrary to other results in the literature, we find that the anisotropic fine-structure constant always decreases with the field. We also study the effect of the running of the coupling constant with the magnetic field on the electron mass. We find that in both cases of massive and massless QED, the electron dynamical mass always decreases with the magnetic field, what can be interpreted as an inverse magnetic catalysis effect.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
ServerMix: Tradeoffs and Challenges of Serverless Data Analytics
Authors:
Pedro García-López,
Marc Sánchez-Artigas,
Simon Shillaker,
Peter Pietzuch,
David Breitgand,
Gil Vernik,
Pierre Sutra,
Tristan Tarrant,
Ana Juan Ferrer
Abstract:
Serverless computing has become very popular today since it largely simplifies cloud programming. Developers do not need to longer worry about provisioning or operating servers, and they pay only for the compute resources used when their code is run. This new cloud paradigm suits well for many applications, and researchers have already begun investigating the feasibility of serverless computing fo…
▽ More
Serverless computing has become very popular today since it largely simplifies cloud programming. Developers do not need to longer worry about provisioning or operating servers, and they pay only for the compute resources used when their code is run. This new cloud paradigm suits well for many applications, and researchers have already begun investigating the feasibility of serverless computing for data analytics. Unfortunately, today's serverless computing presents important limitations that make it really difficult to support all sorts of analytics workloads. This paper first starts by analyzing three fundamental trade-offs of today's serverless computing model and their relationship with data analytics. It studies how by relaxing disaggregation, isolation, and simple scheduling, it is possible to increase the overall computing performance, but at the expense of essential aspects of the model such as elasticity, security, or sub-second activations, respectively. The consequence of these trade-offs is that analytics applications may well end up embracing hybrid systems composed of serverless and serverful components, which we call Servermix in this paper. We will review the existing related work to show that most applications can be actually categorized as Servermix. Finally, this paper will introduce the major challenges of the CloudButton research project to manage these trade-offs.
△ Less
Submitted 26 July, 2019;
originally announced July 2019.
-
Design of the coherent diffusive photon gun for generating non-classical states
Authors:
Matthew Thornton,
Anton Sakovich,
Alexander Mikhalychev,
Jesus Diaz Ferrer,
Pablo de la Hoz,
Natalia Korolkova,
Dmitri Mogilevtsev
Abstract:
We suggest and discuss a concept of deterministic integrated source of non-classical light based on the coherent diffusive photonics, a coherent light flow in a system of dissipatively coupled waveguides. We show how this practical quantum device can be realized with a system of single-mode waveguides laser-inscribed in nonlinear glass. We describe a hierarchy of models, from the complete multi-mo…
▽ More
We suggest and discuss a concept of deterministic integrated source of non-classical light based on the coherent diffusive photonics, a coherent light flow in a system of dissipatively coupled waveguides. We show how this practical quantum device can be realized with a system of single-mode waveguides laser-inscribed in nonlinear glass. We describe a hierarchy of models, from the complete multi-mode model of the waveguide network to the single mode coupled to a bath, analyze the conditions for validity of the simplest single-mode model and demonstrate feasibility of the generation of bright sub-Poissonian light states merely from a coherent input. Notably, the generation of non-classical states occurs at the initial stages of the dynamics, and can be accounted for in the linear model that allows us to circumvent the prohibiting computational complexity of the exact full quantum representation.
△ Less
Submitted 25 November, 2019; v1 submitted 3 July, 2019;
originally announced July 2019.
-
Engineering a QoS Provider Mechanism for Edge Computing with Deep Reinforcement Learning
Authors:
Francisco Carpio,
Admela Jukan,
Roman Sosa,
Ana Juan Ferrer
Abstract:
With the development of new system solutions that integrate traditional cloud computing with the edge/fog computing paradigm, dynamic optimization of service execution has become a challenge due to the edge computing resources being more distributed and dynamic. How to optimize the execution to provide Quality of Service (QoS) in edge computing depends on both the system architecture and the resou…
▽ More
With the development of new system solutions that integrate traditional cloud computing with the edge/fog computing paradigm, dynamic optimization of service execution has become a challenge due to the edge computing resources being more distributed and dynamic. How to optimize the execution to provide Quality of Service (QoS) in edge computing depends on both the system architecture and the resource allocation algorithms in place. We design and develop a QoS provider mechanism, as an integral component of a fog-to-cloud system, to work in dynamic scenarios by using deep reinforcement learning. We choose reinforcement learning since it is particularly well suited for solving problems in dynamic and adaptive environments where the decision process needs to be frequently updated. We specifically use a Deep Q-learning algorithm that optimizes QoS by identifying and blocking devices that potentially cause service disruption due to dynamicity. We compare the reinforcement learning based solution with state-of-the-art heuristics that use telemetry data, and analyze pros and cons.
△ Less
Submitted 2 May, 2019;
originally announced May 2019.
-
Polarization-sensitive and broadband photodetection based on a mixed-dimensionality TiS3/Si p-n junction
Authors:
Yue Niu,
Riccardo Frisenda,
Eduardo Flores,
Jose R. Ares,
Weicheng Jiao,
David Perez de Lara,
Carlos Sanchez,
Rongguo Wang,
Isabel J. Ferrer,
Andres Castellanos-Gomez
Abstract:
The capability to detect the polarization state of light is crucial in many day-life applications and scientific disciplines. Novel anisotropic two-dimensional materials such as TiS3 combine polarization sensitivity, given by the in-plane optical anisotropy, with excellent electrical properties. Here we demonstrate the fabrication of a monolithic polarization sensitive broadband photodetector base…
▽ More
The capability to detect the polarization state of light is crucial in many day-life applications and scientific disciplines. Novel anisotropic two-dimensional materials such as TiS3 combine polarization sensitivity, given by the in-plane optical anisotropy, with excellent electrical properties. Here we demonstrate the fabrication of a monolithic polarization sensitive broadband photodetector based on a mixed-dimensionality TiS3/Si p-n junction. The fabricated devices show broadband responsivity up to 1050 nm, a strong sensitivity to linearly polarized illumination with difference between the two orthogonal polarization states up to 350 % and a good detectivity and fast response time. The discussed devices can be used as building blocks to fabricate more complex polarization sensitive systems such as polarimeters.
△ Less
Submitted 22 September, 2020; v1 submitted 27 March, 2019;
originally announced March 2019.
-
Thermodynamics of Neutrons in a Magnetic Field and its Implications for Neutron Stars
Authors:
E. J. Ferrer,
A. Hackebill
Abstract:
We investigate the effects of a magnetic field on the thermodynamics of a neutron system at finite density and temperature. Our main motivation is to deepen the understanding of the physics of a class of neutron stars known as magnetars, which exhibit extremely strong magnetic fields. Taking into account two facts, (i) the existence of a pressure anisotropy in the presence of a magnetic field and…
▽ More
We investigate the effects of a magnetic field on the thermodynamics of a neutron system at finite density and temperature. Our main motivation is to deepen the understanding of the physics of a class of neutron stars known as magnetars, which exhibit extremely strong magnetic fields. Taking into account two facts, (i) the existence of a pressure anisotropy in the presence of a magnetic field and (ii) that the quantum field theory contribution to the pressure is non-negligible, we show that the maximum value that the inner magnetic field of a star can reach while being in agreement with the magnetohydrostatic equilibrium between the gravitational and matter pressures becomes $10^{17}$ G, an order of magnitude smaller than the previous value obtained through the scalar virial theorem; that the magnetic field has a negligible effect on the neutron system's equation of state; that the system's magnetic susceptibility increases with the temperature; and that the specific heat $C_V$ does not significantly change with the magnetic field in the range of temperatures characteristic of protoneutron stars.
△ Less
Submitted 4 June, 2019; v1 submitted 19 March, 2019;
originally announced March 2019.
-
Chemical Vapor Deposition Growth of Boron-Carbon-Nitrogen layers from Methylamine Borane Thermolysis Products
Authors:
Fabrice Leardini,
Eduardo Flores,
Andrés R. Galvis,
Isabel Jiménez Ferrer,
José Ramón Ares,
Carlos Sánchez,
Pablo Molina,
Herko P. van der Meulen,
Cristina Gómez Navarro,
Guillermo López Polin,
Fernando J. Urbanos,
Daniel Granados,
F. Javier García-García,
Umit B. Demirci,
Pascal G. Yot,
Filippo Mastrangelo,
Maria Grazia Betti,
Carlo Mariani
Abstract:
This work investigates the growth of B-C-N layers by chemical vapor deposition using methylamine borane (MeAB) as single-source precursor. MeAB has been synthesized and characterized, paying particular attention to the analysis of its thermolysis products, which are the gaseous precursors for B-C-N growth. Samples have been grown on Cu foils and transferred onto different substrates for their morp…
▽ More
This work investigates the growth of B-C-N layers by chemical vapor deposition using methylamine borane (MeAB) as single-source precursor. MeAB has been synthesized and characterized, paying particular attention to the analysis of its thermolysis products, which are the gaseous precursors for B-C-N growth. Samples have been grown on Cu foils and transferred onto different substrates for their morphological, structural, chemical, electronic and optical characterizations. The results of these characterizations indicate a segregation of h-BN and Graphene-like (Gr) domains. However, there is an important presence of B and N interactions with C at the Gr borders, and of C interacting at the h-BN-edges, respectively, in the obtained nano-layers. In particular, there is significant presence of C-N bonds, at Gr/h-BN borders and in the form of N do** of Gr domains. The overall B:C:N contents in the layers is close to 1:3:1.5. A careful analysis of the optical bandgap determination of the obtained B-C-N layers is presented, discussed and compared with previous seminal works with samples of similar composition.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
Absence of Landau-Peierls Instability in the Magnetic Dual Chiral Density Wave Phase of Dense QCD
Authors:
Efrain J Ferrer,
Vivian de la Incera
Abstract:
We investigate the stability of the Magnetic Dual Chiral Density Wave (MDCDW) phase of cold and dense QCD against collective low-energy fluctuations of the order parameter. The appearance of additional structures in the system free-energy due to the explicit breaking of the rotational and isospin symmetries by the external magnetic field and the field-induced asymmetry of the lowest Landau level m…
▽ More
We investigate the stability of the Magnetic Dual Chiral Density Wave (MDCDW) phase of cold and dense QCD against collective low-energy fluctuations of the order parameter. The appearance of additional structures in the system free-energy due to the explicit breaking of the rotational and isospin symmetries by the external magnetic field and the field-induced asymmetry of the lowest Landau level modes play a crucial role in the analysis. The new structures not only affect the condensate minimum equations, but also the spectrum of the thermal fluctuations, which lacks the transverse soft modes that typically affect single-modulated inhomogeneous phases in the absence of a magnetic field. Consequently, the long-range order of the MDCDW phase is preserved at finite temperature. The lack of Landau-Peierls instabilities in the MDCDW phase makes this inhomogeneous phase of dense quark matter particularly relevant for the physics of neutron stars.
△ Less
Submitted 9 May, 2020; v1 submitted 18 February, 2019;
originally announced February 2019.
-
Large birefringence and linear dichroism in TiS3 nanosheets
Authors:
Nikos Papadopoulos,
Riccardo Frisenda,
Robert Biele,
Eduardo Flores,
Jose R. Ares,
Carlos Sanchez,
Herre S. J. van der Zant,
Isabel J. Ferrer,
Roberto D'Agosta,
Andres Castellanos-Gomez
Abstract:
TiS3 nanosheets have proven to be promising candidates for ultrathin optoelectronic devices due to their direct narrow band-gap and the strong light-matter interaction. In addition, the marked in-plane anisotropy of TiS3 is appealing for the fabrication of polarization sensitive optoelectronic devices. Herein, we study the optical contrast of TiS3 nanosheets of variable thickness on SiO2/Si substr…
▽ More
TiS3 nanosheets have proven to be promising candidates for ultrathin optoelectronic devices due to their direct narrow band-gap and the strong light-matter interaction. In addition, the marked in-plane anisotropy of TiS3 is appealing for the fabrication of polarization sensitive optoelectronic devices. Herein, we study the optical contrast of TiS3 nanosheets of variable thickness on SiO2/Si substrates, from which we obtain the complex refractive index in the visible spectrum. We find that TiS3 exhibits very large birefringence, larger than that of well-known strong birefringent materials like TiO2 or calcite, and linear dichroism. These findings are in qualitative agreement with ab initio calculations that suggest an excitonic origin for the birefringence and linear dichroism of the material.
△ Less
Submitted 24 September, 2020; v1 submitted 1 October, 2018;
originally announced October 2018.
-
Exchange interactions from a nonorthogonal basis set: from bulk ferromagnets to the magnetism in low-dimensional graphene systems
Authors:
László Oroszlány,
Jaime Ferrer,
András Deák,
László Udvardi,
László Szunyogh
Abstract:
We present a computational method to determine the exchange constants in isotropic spin models. The method uses the Hamiltonian and overlap matrices computed from density functional schemes that are based on nonorthogonal basis sets. We demonstrate that the new method as implemented in the SIESTA code reproduces the Heisenberg interactions of simple metallic bulk ferromagnets as obtained from form…
▽ More
We present a computational method to determine the exchange constants in isotropic spin models. The method uses the Hamiltonian and overlap matrices computed from density functional schemes that are based on nonorthogonal basis sets. We demonstrate that the new method as implemented in the SIESTA code reproduces the Heisenberg interactions of simple metallic bulk ferromagnets as obtained from former well--established computational approaches. Then we address $sp$ magnetism in graphene nanostructures. For fluorinated graphene we obtain exchange interactions in fairly good agreement with previous calculations using maximally localized Wannier functions and we confirm the theoretical prediction of a 120$^\circ$ Néel state. Associated with the magnetic edge-states of a zigzag graphene nanoribbon we find rapidly decaying exchange interactions, however, with an unconventional distance dependence of $\exp(-\sqrt{r/δ})$. We show that the stiffness constant derived from the exchange interactions is consistent with previous estimate based on total energy differences of twisted spin configurations. We highlight that our method is an efficient tool for the analysis of novel hybrid nano-structures where metallic and organic components are integrated to form exotic magnetic patterns.
△ Less
Submitted 2 February, 2019; v1 submitted 24 September, 2018;
originally announced September 2018.
-
Spin signatures in the electrical response of graphene nanogaps
Authors:
V. M. Garcia-Suarez,
A. Garcia-Fuente,
D. Carrascal,
E. Burzuri,
M. Koole,
H. S. J. van der Zant,
M. El Abbassi,
M. Calame,
J. Ferrer
Abstract:
We analyse the electrical response of narrow graphene nanogaps in search for transport signatures stemming from spin-polarized edge states. We find that the electrical transport across graphene nanogaps having perfectly defined zigzag edges does not carry any spin-related signature. We also analyse the magnetic and electrical properties of nanogaps whose electrodes have wedges that possibly occur…
▽ More
We analyse the electrical response of narrow graphene nanogaps in search for transport signatures stemming from spin-polarized edge states. We find that the electrical transport across graphene nanogaps having perfectly defined zigzag edges does not carry any spin-related signature. We also analyse the magnetic and electrical properties of nanogaps whose electrodes have wedges that possibly occur in the currently fabricated nanogaps. These wedges can host spin polarized wedge low-energy states due to the bipartite nature of the graphene lattice. We find that these spin-polarized low-energy modes give rise to low-voltage signatures in the differential conductance and to distinctive features in the stability diagrams. These are caused by fully spin-polarized currents.
△ Less
Submitted 19 September, 2018;
originally announced September 2018.
-
No Net Charge Separation in Hot QCD in a Magnetic Field
Authors:
E. J. Ferrer,
V de la Incera
Abstract:
We study the realization of axion electrodynamics in QCD in the presence of a background magnetic field at temperatures high enough for the occurrence of topological charge transitions that are reflected in the presence of a $θ$-vacuum term in the action. We show that in this system, the Maxwell equations contain two equal and opposite electric currents that are proportional to the time derivative…
▽ More
We study the realization of axion electrodynamics in QCD in the presence of a background magnetic field at temperatures high enough for the occurrence of topological charge transitions that are reflected in the presence of a $θ$-vacuum term in the action. We show that in this system, the Maxwell equations contain two equal and opposite electric currents that are proportional to the time derivative of the axion field $θ$. One of these currents comes directly from the Abelian chiral anomaly term in the action and can be interpreted as a polarization current due to the magnetoelectricity of the system with CP-broken symmetry. The other current is obtained from the regular tadpole diagrams and can be understood as produced by the medium chiral imbalance and the single spin projection of the quarks in the lowest Landau level. Since the two currents cancel out, the net electric charge separation along the magnetic field, a phenomenon known as the Chiral Magnetic Effect, does not take place in hight-T QCD at least in equilibrium, in sharp contrast with many claims in the literature. We discuss the similarities and differences with Weyl semimetals in a magnetic field.
△ Less
Submitted 14 July, 2018;
originally announced July 2018.
-
BIN-CT: Urban Waste Collection based in Predicting the Container Fill Level
Authors:
Javier Ferrer,
Enrique Alba
Abstract:
The fast demographic growth, together with the concentration of the population in cities and the increasing amount of daily waste, are factors that push to the limit the ability of waste assimilation by Nature. Therefore, we need technological means to make an optimal management of the waste collection process, which represents 70% of the operational cost in waste treatment. In this article, we pr…
▽ More
The fast demographic growth, together with the concentration of the population in cities and the increasing amount of daily waste, are factors that push to the limit the ability of waste assimilation by Nature. Therefore, we need technological means to make an optimal management of the waste collection process, which represents 70% of the operational cost in waste treatment. In this article, we present a free intelligent software system, based on computational learning algorithms, which plans the best routes for waste collection supported by past (historical) and future (predictions) data.
The objective of the system is the cost reduction of the waste collection service by means of the minimization in distance traveled by any truck to collect a container, hence the fuel consumption. At the same time the quality of service to the citizen is increased avoiding the annoying overflows of containers thanks to the accurate fill level predictions performed by BIN-CT. In this article we show the features of our software system, illustrating it operation with a real case study of a Spanish city. We conclude that the use of BIN-CT avoids unnecessary visits to containers, reduces the distance traveled to collect a container and therefore we obtain a reduction of total costs and harmful emissions thrown to the atmosphere.
△ Less
Submitted 22 April, 2019; v1 submitted 3 July, 2018;
originally announced July 2018.
-
Blip: JIT and Footloose On The Edge
Authors:
Andy Edmonds,
Chris Woods,
Ana Juan Ferrer,
Juan Francisco Ribera,
Thomas Micheal Bohnert
Abstract:
Edge environments offer a number of advantages for software developers including the ability to create services which can offer lower latency, better privacy, and reduced operational costs than traditional cloud hosted services. However large technical challenges exist, which prevent developers from utilising the Edge; complexities related to the heterogeneous nature of the Edge environment, issue…
▽ More
Edge environments offer a number of advantages for software developers including the ability to create services which can offer lower latency, better privacy, and reduced operational costs than traditional cloud hosted services. However large technical challenges exist, which prevent developers from utilising the Edge; complexities related to the heterogeneous nature of the Edge environment, issues with orchestration and application management and lastly, the inherent issues in creating decentralised distributed applications which operate at a large geographic scale. In this conceptual and architectural paper we envision a solution, Blip, which offers an easy to use programming and operational environment which addresses the these issues. It aims to remove the technical barriers which will inhibit the wider adoption Edge application development. This paper validates the Blip concept by demonstrating how it will deliver on the advantages of the Edge for a familiar scenario.
△ Less
Submitted 31 May, 2018;
originally announced June 2018.
-
Spin-State dependent Conductance Switching in Single Molecule-Graphene Junctions
Authors:
Enrique Burzurí,
Amador García-Fuente,
Victor García-Suárez,
Kuppusamy Senthil Kumar,
Mario Ruben,
Jaime Ferrer,
Herre S. J. van der Zant
Abstract:
Spin-crossover (SCO) molecules are versatile magnetic switches with applications in molecular electronics and spintronics. Downscaling devices to the single-molecule level remains, however, a challenging task since the switching mechanism in bulk is mediated by cooperative intermolecular interactions. Here, we report on electron transport through individual Fe-SCO molecules coupled to few-layer gr…
▽ More
Spin-crossover (SCO) molecules are versatile magnetic switches with applications in molecular electronics and spintronics. Downscaling devices to the single-molecule level remains, however, a challenging task since the switching mechanism in bulk is mediated by cooperative intermolecular interactions. Here, we report on electron transport through individual Fe-SCO molecules coupled to few-layer graphene electrodes \textit{via} $π- π$ stacking. We observe a distinct bistability in the conductance of the molecule and a careful comparison with density functional theory (DFT) calculations allows to associate the bistability with a SCO-induced orbital reconfiguration of the molecule. We find long spin-state lifetimes that are caused by the specific coordination of the magnetic core and the absence of intermolecular interactions according to our calculations. In contrast with bulk samples, the SCO transition is not triggered by temperature but induced by small perturbations in the molecule at any temperature. We propose plausible mechanisms that could trigger the SCO at the single-molecule level.
△ Less
Submitted 21 May, 2018;
originally announced May 2018.
-
Mechanically Controlled Quantum Interference in Graphene Break Junctions
Authors:
Sabina Caneva,
Pascal Gehring,
Víctor M. García-Suárez,
Amador García-Fuente,
Davide Stefani,
Ignacio J. Olavarria-Contreras,
Jaime Ferrer,
Cees Dekker,
Herre S. J. van der Zant
Abstract:
The ability to detect and distinguish quantum interference signatures is important for both fundamental research and for the realization of devices including electron resonators, interferometers and interference-based spin filters. Consistent with the principles of subwavelength optics, the wave nature of electrons can give rise to various types of interference effects, such as Fabry-Pérot resonan…
▽ More
The ability to detect and distinguish quantum interference signatures is important for both fundamental research and for the realization of devices including electron resonators, interferometers and interference-based spin filters. Consistent with the principles of subwavelength optics, the wave nature of electrons can give rise to various types of interference effects, such as Fabry-Pérot resonances, Fano resonances and the Aharonov-Bohm effect. Quantum-interference conductance oscillations have indeed been predicted for multiwall carbon nanotube shuttles and telescopes, and arise from atomic-scale displacements between the inner and outer tubes. Previous theoretical work on graphene bilayers indicates that these systems may display similar interference features as a function of the relative position of the two sheets. Experimental verification is, however, still lacking. Graphene nanoconstrictions represent an ideal model system to study quantum transport phenomena due to the electronic coherence and the transverse confinement of the carriers. Here, we demonstrate the fabrication of bowtie-shaped nanoconstrictions with mechanically controlled break junctions (MCBJs) made from a single layer of graphene. We find that their electrical conductance displays pronounced oscillations at room temperature, with amplitudes that modulate over an order of magnitude as a function of sub-nanometer displacements. Surprisingly, the oscillations exhibit a period larger than the graphene lattice constant. Charge-transport calculations show that the periodicity originates from a combination of quantum-interference and lattice-commensuration effects of two graphene layers that slide across each other. Our results provide direct experimental observation of Fabry-Pérot-like interference of electron waves that are partially reflected/transmitted at the edges of the graphene bilayer overlap region.
△ Less
Submitted 5 October, 2018; v1 submitted 15 March, 2018;
originally announced March 2018.