-
Laser cooling $^{88}$Sr to microkelvin temperature with an integrated-photonics system
Authors:
Andrew R. Ferdinand,
Zheng Luo,
Sindhu Jammi,
Zachary Newman,
Grisha Spektor,
Okan Koksal,
Parth B. Patel,
Daniel Sheredy,
William Lunden,
Akash Rakholia,
Travis C. Briles,
Wenqi Zhu,
Martin M. Boyd,
Amit Agrawal,
Scott B. Papp
Abstract:
We report on experiments generating a magneto-optical trap (MOT) of 88-strontium ($^{88}$Sr) atoms at microkelvin temperature, using integrated-photonics devices. With metasurface optics integrated on a fused-silica substrate, we generate six-beam, circularly polarized, counter-propagating MOTs on the blue broad-line, 461 nm, and red narrow-line, 689 nm, Sr cooling transitions without bulk optics.…
▽ More
We report on experiments generating a magneto-optical trap (MOT) of 88-strontium ($^{88}$Sr) atoms at microkelvin temperature, using integrated-photonics devices. With metasurface optics integrated on a fused-silica substrate, we generate six-beam, circularly polarized, counter-propagating MOTs on the blue broad-line, 461 nm, and red narrow-line, 689 nm, Sr cooling transitions without bulk optics. By use of a diverging beam configuration, we create up to 10 mm diameter MOT beams at the trap** location. To frequency stabilize and linewidth narrow the cooling lasers, we use fiber-packaged, integrated nonlinear waveguides to spectrally broaden a frequency comb. The ultra-coherent supercontinuum of the waveguides covers 650 nm to 2500 nm, enabling phase locks of the cooling lasers to hertz level linewidth. Our work highlights the possibility to simplify the preparation of an ultracold 88Sr gas for an optical-lattice clock with photonic devices. By implementing a timing sequence for control of the MOT lasers and the quadrupole magnetic-field gradient, we collect atoms directly from a thermal beam into the blue MOT and continuously cool into a red MOT with dynamic detuning and intensity control. There, the red MOT temperature is as low as $2~μ$K and the overall transfer efficiency up to 16%. We characterize this sequence, including an intermediate red MOT with modulated detuning. Our experiments demonstrate an integrated photonics system capable of cooling alkaline-earth gases to microkelvin temperature with sufficient transfer efficiencies for adoption in scalable optical clocks and quantum sensors.
△ Less
Submitted 19 April, 2024;
originally announced April 2024.
-
Three-dimensional, multi-wavelength beam formation with integrated metasurface optics for Sr laser cooling
Authors:
Sindhu Jammi,
Andrew R. Ferdinand,
Zheng Luo,
Zachary L. Newman,
Gregory Spektor,
Junyeob Song,
Okan Koksal,
Akash V. Rakholia,
William Lunden,
Daniel Sheredy,
Parth B. Patel,
Martin M. Boyd,
Wenqi Zhu,
Amit Agrawal,
Travis C. Briles,
Scott B. Papp
Abstract:
We demonstrate the formation of a complex, multi-wavelength, three-dimensional laser beam configuration with integrated metasurface optics. Our experiments support the development of a compact Sr optical-lattice clock, which leverages magneto-optical trap** on atomic transitions at 461 nm and 689 nm without bulk free-space optics. We integrate six, mm-scale metasurface optics on a fused-silica s…
▽ More
We demonstrate the formation of a complex, multi-wavelength, three-dimensional laser beam configuration with integrated metasurface optics. Our experiments support the development of a compact Sr optical-lattice clock, which leverages magneto-optical trap** on atomic transitions at 461 nm and 689 nm without bulk free-space optics. We integrate six, mm-scale metasurface optics on a fused-silica substrate and illuminate them with light from optical fibers. The metasurface optics provide full control of beam pointing, divergence, and polarization to create the laser configuration for a magneto-optical trap. We report the efficiency and integration of the three-dimensional visible laser beam configuration, demonstrating the suitability of metasurface optics for atomic laser cooling.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Universal visible emitters in nanoscale integrated photonics
Authors:
Grisha Spektor,
David Carlson,
Zach Newman,
**hee Lee Skarda,
Neil Sapra,
Logan Su,
Sindhu Jammi,
Andrew R. Ferdinand,
Amit Agrawal,
Jelena Vučković,
Scott B. Papp
Abstract:
Visible wavelengths of light control the quantum matter of atoms and molecules and are foundational for quantum technologies, including computers, sensors, and clocks. The development of visible integrated photonics opens the possibility for scalable circuits with complex functionalities, advancing both the scientific and technological frontiers. We experimentally demonstrate an inverse design app…
▽ More
Visible wavelengths of light control the quantum matter of atoms and molecules and are foundational for quantum technologies, including computers, sensors, and clocks. The development of visible integrated photonics opens the possibility for scalable circuits with complex functionalities, advancing both the scientific and technological frontiers. We experimentally demonstrate an inverse design approach based on superposition of guided-mode sources, allowing the generation and full control of free-space radiation directly from within a single 150 nm layer Ta2O5, showing low loss across visible and near-infrared spectra. We generate diverging circularly-polarized beams at the challenging 461 nm wavelength that can be directly used for magneto-optical traps of strontium atoms, constituting a fundamental building block for a range of atomic-physics-based quantum technologies. Our generated topological vortex beams and spatially-varying polarization emitters could open unexplored light-matter interaction pathways, enabling a broad new photonic-atomic paradigm. Our platform highlights the generalizability of nanoscale devices for visible-laser emission and will be critical for scaling quantum technologies.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
First full cool down of the SPIRAL 2 superconducting LINAC
Authors:
Adnan Ghribi,
Muhammad Aburas,
Yoann Baumont,
Pierre-Emmanuel Bernaudin,
Stéphane Bonneau,
Guillaume Duteil,
Robin Ferdinand,
Michel Lechartier,
Jean-François Leyge,
Guillaume Lescalié,
Yann Thivel,
Arnaud Trudel,
Laurent Valentin,
Adrien Vassal
Abstract:
SPIRAL 2 is a high intensity heavy ions beams accelerator project that has been going on for more than 10 years now. Countless efforts in different disciplines made it what it is today. One of the most important steps after the set up of the different equipments has been the very first full cool down of the superconducting cavities in an accelerator operation type configuration. While this has bee…
▽ More
SPIRAL 2 is a high intensity heavy ions beams accelerator project that has been going on for more than 10 years now. Countless efforts in different disciplines made it what it is today. One of the most important steps after the set up of the different equipments has been the very first full cool down of the superconducting cavities in an accelerator operation type configuration. While this has been a major achievement for the SPIRAL 2 teams, it also hi-lighted new challenges and constraints that would have to be addressed in order to have a high availability rate of the beam from the cryogenics side. This paper retraces this particular episode.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
Multi-state discrimination below the quantum noise limit at the single-photon level
Authors:
A. R. Ferdinand,
M. T. DiMario,
F. E. Becerra
Abstract:
Measurements approaching the ultimate quantum limits of sensitivity are central in quantum information processing, quantum metrology, and communication. Quantum measurements to discriminate multiple states at the single-photon level are essential for optimizing information transfer in low-power optical communications and quantum communications, and can enhance the capabilities of many quantum info…
▽ More
Measurements approaching the ultimate quantum limits of sensitivity are central in quantum information processing, quantum metrology, and communication. Quantum measurements to discriminate multiple states at the single-photon level are essential for optimizing information transfer in low-power optical communications and quantum communications, and can enhance the capabilities of many quantum information protocols. Here, we theoretically investigate and experimentally demonstrate the discrimination of multiple coherent states of light with sensitivities surpassing the quantum noise limit (QNL) at the single-photon level under realistic conditions of loss and noise based on strategies implementing globally-optimized adaptive measurements with single photon counting and displacement operations. These discrimination strategies can provide realistic advantages to enhance information transfer at low powers, and are compatible with photon number resolving detection, which provides robustness at high powers, thus allowing for surpassing the QNL at arbitrary input power levels under realistic conditions.
△ Less
Submitted 31 October, 2017;
originally announced November 2017.
-
Status Report on the 5 Mev Iphi RFQ
Authors:
R. Ferdinand,
P-Y. Beauvais,
R. Duperrier,
A. France,
J. Gaiffier,
J-M. Lagniel,
M. Painchault,
F. Simoens,
CEA-Saclay,
DSM-DAPNIA-SEA,
P. Balleyguier,
CEA-Bruyeres le Chatel,
DAM
Abstract:
A 5-MeV RFQ designed for a proton current up to 100-mA CW is now under construction as part of the High Intensity Proton Injector project (IPHI). Its computed transmission is greater than 99 %. The main goals of the project are to verify the accuracy of the design codes, to gain the know-how on fabrication, tuning procedures and operations, to measure the output beam characteristics in order to…
▽ More
A 5-MeV RFQ designed for a proton current up to 100-mA CW is now under construction as part of the High Intensity Proton Injector project (IPHI). Its computed transmission is greater than 99 %. The main goals of the project are to verify the accuracy of the design codes, to gain the know-how on fabrication, tuning procedures and operations, to measure the output beam characteristics in order to optimise the higher energy part of the linac, and to reach a high availability with minimum beam trips. A cold model has been built to develop the tuning procedure. The present status of the IPHI RFQ is presented.
△ Less
Submitted 18 August, 2000;
originally announced August 2000.
-
Design of the Ess RFQs and Chop** Line
Authors:
R. Duperrier,
R. Ferdinand,
P. Gros,
J-M. Lagniel,
N. Pichoff,
D. Uriot,
CEA-Saclay,
DSM-DAPNIA-SEA
Abstract:
The chop** line is a critical part of the ESS linac in term of technical realisation of the choppers and preservation of the beam qualities. A new optimised design of the ESS RFQs and chop** lines is reported. The beam dynamics has been optimised with H- beam currents up to 100-mA to have safety margin with respect to the ESS goals. The first RFQ transmits almost 99.7% of the beam up to 2 Me…
▽ More
The chop** line is a critical part of the ESS linac in term of technical realisation of the choppers and preservation of the beam qualities. A new optimised design of the ESS RFQs and chop** lines is reported. The beam dynamics has been optimised with H- beam currents up to 100-mA to have safety margin with respect to the ESS goals. The first RFQ transmits almost 99.7% of the beam up to 2 MeV. The line with two choppers allows a perfect chop** between 2 bunches. The second RFQ accelerates the particles up to 5 MeV with a transmission close to 100%.
△ Less
Submitted 18 August, 2000;
originally announced August 2000.
-
An ECR hydrogen negative ion source at CEA/Saclay: preliminary results
Authors:
R. Gobin,
P-Y. Beauvais,
O. Delferriere,
R. Ferdinand,
F. Harrault,
J-M. Lagniel
Abstract:
The development of a high intensity negative ion source is part of a considerably larger activity presently undergoing at CEA Saclay in the field of high intensity linear accelerators. Preliminary studies toward the construction of a 2.45 GHz ECR H- ion source have been performed for few months. This new test bench takes advantage of our experience on the French high intensity proton source SILH…
▽ More
The development of a high intensity negative ion source is part of a considerably larger activity presently undergoing at CEA Saclay in the field of high intensity linear accelerators. Preliminary studies toward the construction of a 2.45 GHz ECR H- ion source have been performed for few months. This new test bench takes advantage of our experience on the French high intensity proton source SILHI. In the new source, the high-energy electrons created in the ECR zone are trapped by a dipole magnetic filter. A rectangular 200 mm long plasma chamber and an intermediate iron shield are used to minimize the magnetic field in the extraction region. A second magnetic filter separates electrons and negative ions in a 10 kV extraction system. To reduce the electron/H- ratio, the plasma electrode is slightly polarized. The design allows future evolutions such as cesium injection, higher energy extraction and plasma diagnostics. The installation of the source is now in progress. The first helium plasma has been produced for few weeks to verify the electron separator behavior. The design, computations and the first results of the source are presented.
△ Less
Submitted 18 August, 2000;
originally announced August 2000.
-
Toutatis, the Cea-Saclay RFQ code
Authors:
R. Duperrier,
R. Ferdinand,
J. -M. Lagniel,
N. Pichoff
Abstract:
A CW high power linear accelerator can only work with very low particles losses and structure activation. At low energy, the RFQ is a very sensitive element to losses. To design the RFQ, a good understanding of the beam dynamics is requested. Generally, the reference code PARMTEQM is enough to design the accelerator. TOUTATIS has been written with goals of cross-checking results and obtaining a…
▽ More
A CW high power linear accelerator can only work with very low particles losses and structure activation. At low energy, the RFQ is a very sensitive element to losses. To design the RFQ, a good understanding of the beam dynamics is requested. Generally, the reference code PARMTEQM is enough to design the accelerator. TOUTATIS has been written with goals of cross-checking results and obtaining a more reliable dynamics. This paper relates the different numerical methods used in the code. It is time-based, using multigrids methods and adaptive mesh for a fine description of the forces without being time consuming.
The field is accurately calculated through a Poisson solver and the vanes are fully described, allowing to properly simulate the coupling gaps and RFQs extremities. Differences with PARMTEQM and LIDOS.RFQ are shown.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
