-
Experimental and numerical investigation of bubble migration in shear flow: deformability-driven chaining and repulsion
Authors:
Blandine Feneuil,
Kazi Tassawar Iqbal,
Atle Jensen,
Luca Brandt,
Outi Tammisola,
Andreas Carlson
Abstract:
We study the interaction-induced migration of bubbles in shear flow and observe that bubbles suspended in elastoviscoplastic emulsions organise into chains aligned in the flow direction, similarly to particles in viscoelastic fluids. To investigate the driving mechanism, we perform experiments and simulations on bubble pairs, using suspending fluids with different rheological properties. First, we…
▽ More
We study the interaction-induced migration of bubbles in shear flow and observe that bubbles suspended in elastoviscoplastic emulsions organise into chains aligned in the flow direction, similarly to particles in viscoelastic fluids. To investigate the driving mechanism, we perform experiments and simulations on bubble pairs, using suspending fluids with different rheological properties. First, we notice that, for all fluids, the interaction type depends on the relative position of the bubbles. If they are aligned in the vorticity direction, they repel, if not, they attract each other. The simulations show a similar behavior in Newtonian fluids as in viscoelastic and elastoviscoplastic fluids, as long as the capillary number is sufficiently large. This shows that the interaction-related migration of the bubbles is strongly affected by the bubble deformation. We suggest that the cause of migration is the interaction between the heterogeneous pressure fields around the deformed bubbles, due to capillary pressure.
△ Less
Submitted 21 April, 2023; v1 submitted 13 May, 2022;
originally announced May 2022.
-
Growth of a viscoplastic blister underneath an elastic sheet
Authors:
Torstein Sæter,
Olivier Galland,
Blandine Feneuil,
Andreas Carlson
Abstract:
Inspired by the formation of geological structures as earth's crust deforms by magmatic intrusions, we investigate the elastohydrodynamic growth of a viscoplastic blister under an elastic sheet. By combining experiments, scaling analysis and numerical simulations we reveal a new regime for the growth of the blister's height $\sim t^{5/9}$ and radius $\sim t^{2/9}$. A plug like flow inside the blis…
▽ More
Inspired by the formation of geological structures as earth's crust deforms by magmatic intrusions, we investigate the elastohydrodynamic growth of a viscoplastic blister under an elastic sheet. By combining experiments, scaling analysis and numerical simulations we reveal a new regime for the growth of the blister's height $\sim t^{5/9}$ and radius $\sim t^{2/9}$. A plug like flow inside the blister dictates its dynamics, whereas the blister takes a quasi-static self-similar shape given by a balance in the pressure gradient induced by bending of the elastic sheet and the fluid's yield stress.
△ Less
Submitted 8 March, 2022;
originally announced March 2022.
-
Elastic modulus measurements of cooked Lutefisk
Authors:
Blandine Feneuil,
Eirik Strøm Lillebø,
Christian Larris Honstad,
Atle Jensen,
Andreas Carlson
Abstract:
Lutefisk is a traditional Norwegian Christmas dish, made of dry cod soaked in a lye solution before re-hydrated. We report measurements of the tissue softness of cooked Lutefisk. Surprisingly, we find that the elastic modulus does not seem to depend heavily on cooking time, cooking temperature and the amount of salt, but depends instead mainly on the size of the fish fillets and the period of fish…
▽ More
Lutefisk is a traditional Norwegian Christmas dish, made of dry cod soaked in a lye solution before re-hydrated. We report measurements of the tissue softness of cooked Lutefisk. Surprisingly, we find that the elastic modulus does not seem to depend heavily on cooking time, cooking temperature and the amount of salt, but depends instead mainly on the size of the fish fillets and the period of fishing. Although the salting and cooking of the Lutefisk affects strongly the visual aspect of the fish fillets, these changes are not measurable with a rheometer.
△ Less
Submitted 25 May, 2022; v1 submitted 15 December, 2021;
originally announced December 2021.
-
Destabilization and phase separation of particle suspensions in emulsions
Authors:
Blandine Feneuil,
Atle Jensen,
Andreas Carlson
Abstract:
Yield stress fluids are widely used in industrial application to arrest dense solid particles, which can be studied by using a concentrated emulsion as a model fluid. We show in experiments that particle sedimentation in emulsions cannot be predicted by the classical criterion for spheres embedded in a yield stress fluid. Phase separation processes take place, where a liquid layer forms and partic…
▽ More
Yield stress fluids are widely used in industrial application to arrest dense solid particles, which can be studied by using a concentrated emulsion as a model fluid. We show in experiments that particle sedimentation in emulsions cannot be predicted by the classical criterion for spheres embedded in a yield stress fluid. Phase separation processes take place, where a liquid layer forms and particle sedimentation is enhanced by the emulsion drainage. In addition, emulsion drainage can be arrested or enhanced by the amount of particles embedded in the emulsion. A minimal mathematical model is developed and solved in numerical simulations to describe the emulsion drainage in the presence of particles, which favorably compares with the experimental stability diagram and the sedimentation dynamics.
△ Less
Submitted 15 October, 2020; v1 submitted 14 August, 2020;
originally announced August 2020.
-
Yield stress of aerated cement paste
Authors:
Blandine Feneuil,
Nicolas Roussel,
Olivier Pitois
Abstract:
Yield stress of aerated cement paste is studied. Samples are prepared by mixing aqueous foam with cement paste, which allows controlling bubble size, gas volume fraction and yield stress of the cement paste. Two distinct behaviors are observed depending on the surfactant used to prepare the precursor aqueous foam: (i) For a surfactant with low adsorption ability with respect to cement grains, bubb…
▽ More
Yield stress of aerated cement paste is studied. Samples are prepared by mixing aqueous foam with cement paste, which allows controlling bubble size, gas volume fraction and yield stress of the cement paste. Two distinct behaviors are observed depending on the surfactant used to prepare the precursor aqueous foam: (i) For a surfactant with low adsorption ability with respect to cement grains, bubbles tend to decrease the yield stress of the paste with magnitude governed by the Bingham capillary number, which accounts for bubble deformability. (ii) For a surfactant with high adsorption ability, bubbles increase significantly the yield stress. This behavior is shown to result from the surfactant-induced hydrophobization of the cement grains, which adsorb at the surface of the bubbles and tend to rigidify them. Within this regime, the effect of air incorporation is comparable to the effect of added solid particles.
△ Less
Submitted 25 October, 2019;
originally announced October 2019.
-
Optimal cement paste yield stress for the production of stable cement foams
Authors:
Blandine Feneuil,
Nicolas Roussel,
Olivier Pitois
Abstract:
Production of morphology-controlled cement foams remains challenging, mainly due to bubble stability issues during cement setting. The use of cement paste with high yield stress is expected to promote stability by dam** intrinsic bubble kinetics. Here we show however that for given W/C ratio, fresh foam stability can be achieved instead by decreasing the yield stress of the cement paste. Indeed,…
▽ More
Production of morphology-controlled cement foams remains challenging, mainly due to bubble stability issues during cement setting. The use of cement paste with high yield stress is expected to promote stability by dam** intrinsic bubble kinetics. Here we show however that for given W/C ratio, fresh foam stability can be achieved instead by decreasing the yield stress of the cement paste. Indeed, in this low apparent yield stress regime, van der Waals attraction between cement grains is reduced and grains are allowed to be efficiently packed by bubbles, providing enhanced mechanical properties. This result is obtained for two distinct additives used at controlled concentrations and without resorting to set accelerators, which highlights the general significance of the underlying stability mechanism. It offers a promising solution to produce stable cement foams at high air content.
△ Less
Submitted 10 September, 2019;
originally announced September 2019.
-
Stability criterion for fresh cement foams
Authors:
Blandine Feneuil,
Patrick Aimedieu,
Mario Scheel,
Jonathan Perrin,
Nicolas Roussel,
Olivier Pitois
Abstract:
We prepare and study cement foam samples with well-controlled structure, i.e. containing monodisperse bubbles. We observe that the foam structure often changes before cement setting and identify ripening as the major destabilization mechanism at stake. Drainage plays only a minor role in cement foam destabilization except when bubble size is large. Then we show that a single stability criterion ca…
▽ More
We prepare and study cement foam samples with well-controlled structure, i.e. containing monodisperse bubbles. We observe that the foam structure often changes before cement setting and identify ripening as the major destabilization mechanism at stake. Drainage plays only a minor role in cement foam destabilization except when bubble size is large. Then we show that a single stability criterion can be defined, for a large range of cement foams with different formulations. This criterion involves the bubble radius and the yield stress of the cement paste such as confined by and between the bubbles, at a given characteristic time after sample preparation.
△ Less
Submitted 10 September, 2019; v1 submitted 30 April, 2019;
originally announced July 2019.
