-
Raman Fingerprints of Graphene Produced by Anodic Electrochemical Exfoliation
Authors:
Vaiva Nagyte,
Daniel J. Kelly,
Alexandre Felten,
Gennaro Picardi,
YuYoung Shin,
Adriana Alieva,
Robyn E. Worsley,
Khaled Parvez,
Simone Dehm,
Ralph Krupke,
Sarah J. Haigh,
Antonios Oikonomou,
Andrew J. Pollard,
Cinzia Casiraghi
Abstract:
Electrochemical exfoliation is one of the most promising methods for scalable production of graphene. However, limited understanding of its Raman spectrum as well as lack of measurement standards for graphene strongly limit its industrial applications. In this work we show a systematic study of the Raman spectrum of electrochemically exfoliated graphene, produced using different electrolytes and d…
▽ More
Electrochemical exfoliation is one of the most promising methods for scalable production of graphene. However, limited understanding of its Raman spectrum as well as lack of measurement standards for graphene strongly limit its industrial applications. In this work we show a systematic study of the Raman spectrum of electrochemically exfoliated graphene, produced using different electrolytes and different types of solvents in varying amounts. We demonstrate that no information on the thickness can be extracted from the shape of the 2D peak as this type of graphene is defective. Furthermore, the number of defects and the uniformity of the samples strongly depend on the experimental conditions, including post-processing. Under specific conditions, formation of short conductive trans-polyacetylene chains has been observed. Our Raman analysis provides guidance for the community on how to get information on defects coming from electrolyte, temperature and other experimental conditions, by making Raman spectroscopy a powerful metrology tool.
△ Less
Submitted 15 April, 2020;
originally announced June 2020.
-
Water-based and Inkjet Printable Inks made by Electrochemically Exfoliated Graphene
Authors:
Khaled Parvez,
Robyn Worsley,
Adriana Alieva,
Alexandre Felten,
Cinzia Casiraghi
Abstract:
Inkjet printable graphene inks are very attractive for applications in flexible and foldable electronics, such as wearable electronics and the Internet of Things. However, the ink preparation is still very time consuming as high concentrations can be achieved only with prolonged sonication (>24 hours) or with expensive setups. Here we demonstrate a water-based inkjet printable ink made from electr…
▽ More
Inkjet printable graphene inks are very attractive for applications in flexible and foldable electronics, such as wearable electronics and the Internet of Things. However, the ink preparation is still very time consuming as high concentrations can be achieved only with prolonged sonication (>24 hours) or with expensive setups. Here we demonstrate a water-based inkjet printable ink made from electrochemically exfoliated graphene. A printable and stable (> 1 month) ink with concentration of ~2.25 mg mL-1 was formulated in less than 5 hrs, using two successive steps: first exfoliation and dispersion of large graphene flakes (> 5 um) followed by 1 hour tip-sonication to reduce the flake size below 1 um, as required for the material to be ejected by the nozzle. The formulated ink contains more than 75% single- and few-layers (i.e. less than 2 nm in thickness) graphene flakes with an average lateral size of 740 nm. Thermal annealing allows to achieve high C/O ratio (>10), which translates into one of the highest electrical conductivity (~3.91 x 104 S m-1) reported so far for solution-processed graphene, without the use of any harsh chemical processing.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
Restoring self-limited growth of single-layer graphene on copper foil via backside coating
Authors:
Nicolas Reckinger,
Marcello Casa,
Jeroen E. Scheerder,
Wout Keijers,
Matthieu Paillet,
Jean-Roch Huntzinger,
Emile Haye,
Alexandre Felten,
Joris Van de Vondel,
Maria Sarno,
Luc Henrard,
Jean-Francois Colomer
Abstract:
The growth of single-layer graphene (SLG) by chemical vapor deposition (CVD) on copper surfaces is very popular because of the self-limiting effect that prevents the growth of few-layer graphene (FLG). However, the reproducibility of the CVD growth of homogeneous SLG remains a major challenge, especially if one wants to avoid heavy surface treatments, monocrystalline substrates and expensive equip…
▽ More
The growth of single-layer graphene (SLG) by chemical vapor deposition (CVD) on copper surfaces is very popular because of the self-limiting effect that prevents the growth of few-layer graphene (FLG). However, the reproducibility of the CVD growth of homogeneous SLG remains a major challenge, especially if one wants to avoid heavy surface treatments, monocrystalline substrates and expensive equipment to control the atmosphere inside the growth system. We demonstrate here that backside tungsten coating of copper foil allows the exclusive growth of SLG with full coverage by atmospheric pressure CVD implemented in a vacuum-free outfit. We show that the absence of FLG patches is related to the absence of decomposition of methane on the backside and consequently to the suppression of C diffusion through copper. In the perspective of large-scale production of graphene, this approach constitutes a significant improvement to the traditional CVD growth process since (1) a tight control of the hydrocarbon flow is no longer required to avoid FLG formation and, consequently, (2) the growth duration necessary to reach full coverage can be dramatically shortened.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
Light emission, light detection and strain sensing with nanocrystalline graphene
Authors:
Adnan Riaz,
Feliks Pyatkov,
Asiful Alam,
Simone Dehm,
Alexandre Felten,
Venkata S. K. Chakravadhanula,
Benjamin S. Flavel,
Christian Kübel,
Uli Lemmer,
Ralph Krupke
Abstract:
Graphene is of increasing interest for optoelectronic applications exploiting light detection, light emission and light modulation. Intrinsically light matter interaction in graphene is of a broadband type. However by integrating graphene into optical micro cavities also narrow band light emitters and detectors have been demonstrated. The devices benefit from the transparency, conductivity and pro…
▽ More
Graphene is of increasing interest for optoelectronic applications exploiting light detection, light emission and light modulation. Intrinsically light matter interaction in graphene is of a broadband type. However by integrating graphene into optical micro cavities also narrow band light emitters and detectors have been demonstrated. The devices benefit from the transparency, conductivity and processability of the atomically thin material. To this end we explore in this work the feasibility of replacing graphene by nanocrystalline graphene, a material which can be grown on dielectric surfaces without catalyst by graphitization of polymeric films. We have studied the formation of nanocrystalline graphene on various substrates and under different graphitization conditions. The samples were characterized by resistance, optical transmission, Raman, X-ray photoelectron spectroscopy, atomic force microscopy and electron microscopy measurements. The conducting and transparent wafer-scale material with nanometer grain size was also patterned and integrated into devices for studying light-matter interaction. The measurements show that nanocrystalline graphene can be exploited as an incandescent emitter and bolometric detector similar to crystalline graphene. Moreover the material exhibits piezoresistive behavior which makes nanocrystalline graphene interesting for transparent strain sensors.
△ Less
Submitted 18 October, 2016;
originally announced October 2016.
-
Carbon nanotubes decorated with gold, platinum and rhodium clusters by injection of colloidal solutions into the post-discharge of a RF atmospheric plasma
Authors:
Nicolas Claessens,
Frédéric Demoisson,
Thierry Dufour,
Ali Mansour,
Alexandre Felten,
Jérôme Guillot,
Jean-Jacques Pireaux,
François Reniers
Abstract:
In this paper, we present a new, simple, robust and efficient technique to decorate multi-wall carbon nanotubes (MWCNT) with metal nanoparticles. As case studies, Au, Pt and Rh nanoparticles are grafted onto MWCNTs by spraying a colloidal solution into the post-discharge of an atmospheric argon or argon/oxygen RF plasma. The method that we introduce here is different from those usually described i…
▽ More
In this paper, we present a new, simple, robust and efficient technique to decorate multi-wall carbon nanotubes (MWCNT) with metal nanoparticles. As case studies, Au, Pt and Rh nanoparticles are grafted onto MWCNTs by spraying a colloidal solution into the post-discharge of an atmospheric argon or argon/oxygen RF plasma. The method that we introduce here is different from those usually described in the literature, since the treatment is operated at atmospheric pressure, allowing the realization in only one step of the surface activation and the deposition processes. We demonstrate experimentally that the addition of oxygen gas in the plasma increases significantly the amount of grafted metal nanoparticles. Moreover, TEM pictures clearly show that the grafted nanoparticles are well controlled in size.
△ Less
Submitted 2 May, 2016;
originally announced May 2016.
-
Heterostructures produced from nanosheet-based inks
Authors:
F. Withers,
H. Yang,
L. Britnell,
A. P Rooney,
E. Lewis,
A. Felten,
C. R. Woods,
V. Sanchez Romaguera,
T. Georgiou,
A. Eckmann,
Y. J. Kim,
S. G. Yeates,
S. J. Haigh,
A. K. Geim,
K. S. Novoselov,
C. Casiraghi
Abstract:
The new paradigm of heterostructures based on two-dimensional (2D) atomic crystals has already led to the observation of exciting physical phenomena and creation of novel devices. The possibility of combining layers of different 2D materials in one stack allows unprecedented control over the electronic and optical properties of the resulting material. Still, the current method of mechanical transf…
▽ More
The new paradigm of heterostructures based on two-dimensional (2D) atomic crystals has already led to the observation of exciting physical phenomena and creation of novel devices. The possibility of combining layers of different 2D materials in one stack allows unprecedented control over the electronic and optical properties of the resulting material. Still, the current method of mechanical transfer of individual 2D crystals, though allowing exceptional control over the quality of such structures and interfaces, is not scalable. Here we show that such heterostructures can be assembled from chemically exfoliated 2D crystals, allowing for low-cost and scalable methods to be used in the device fabrication.
△ Less
Submitted 4 September, 2014;
originally announced September 2014.
-
The influence of residual oxidizing impurities on the synthesis of graphene by atmospheric pressure chemical vapor deposition
Authors:
Nicolas Reckinger,
Alexandre Felten,
Cristiane Nascimento Santos,
Benoît Hackens,
Jean-François Colomer
Abstract:
The growth of graphene on copper by atmospheric pressure chemical vapor deposition in a system free of pum** equipment is investigated. The emphasis is put on the necessity of hydrogen presence during graphene synthesis and cooling. In the absence of hydrogen during the growth step or cooling at slow rate, weak carbon coverage, consisting mostly of oxidized and amorphous carbon, is obtained on t…
▽ More
The growth of graphene on copper by atmospheric pressure chemical vapor deposition in a system free of pum** equipment is investigated. The emphasis is put on the necessity of hydrogen presence during graphene synthesis and cooling. In the absence of hydrogen during the growth step or cooling at slow rate, weak carbon coverage, consisting mostly of oxidized and amorphous carbon, is obtained on the copper catalyst. The oxidation originates from the inevitable occurrence of residual oxidizing impurities in the reactor's atmosphere. Graphene with appreciable coverage can be grown within the vacuum-free furnace only upon admitting hydrogen during the growth step. After formation, it is preserved from the destructive effect of residual oxidizing contaminants once exposure at high temperature is minimized by fast cooling or hydrogen flow. Under these conditions, micrometer-sized hexagon-shaped graphene domains of high structural quality are achieved.
△ Less
Submitted 15 June, 2013; v1 submitted 16 March, 2013;
originally announced March 2013.
-
Probing the Nature of Defects in Graphene by Raman Spectroscopy
Authors:
Axel Eckmann,
Alexandre Felten,
Artem Mishchenko,
Liam Britnell,
Ralph Krupke,
Kostya S. Novoselov,
Cinzia Casiraghi
Abstract:
Raman Spectroscopy is able to probe disorder in graphene through defect-activated peaks. It is of great interest to link these features to the nature of disorder. Here we present a detailed analysis of the Raman spectra of graphene containing different type of defects. We found that the intensity ratio of the D and D' peak is maximum (~ 13) for sp3-defects, it decreases for vacancy-like defects (~…
▽ More
Raman Spectroscopy is able to probe disorder in graphene through defect-activated peaks. It is of great interest to link these features to the nature of disorder. Here we present a detailed analysis of the Raman spectra of graphene containing different type of defects. We found that the intensity ratio of the D and D' peak is maximum (~ 13) for sp3-defects, it decreases for vacancy-like defects (~ 7) and reaches a minimum for boundaries in graphite (~3.5).
△ Less
Submitted 9 July, 2012;
originally announced July 2012.
-
The Role of Oxygen at the Interface between Titanium and Carbon Nanotubes
Authors:
Alexandre Felten,
Irene Suarez-Martinez,
Xiaoxing Ke,
Gustaaf Van Tendeloo,
Jacques Ghijsen,
Jean Jacques Pireaux,
Wolfgang Drube,
Carla Bittencourt,
Christopher Ewels
Abstract:
We study the interface between carbon nanotubes (CNTs) and surface-deposited titanium using electron microscopy and photoemission spectroscopy, supported by density functional calculations. Charge transfer from the Ti atoms to the nanotube and carbide formation is observed at the interface which indicates strong interaction. Nevertheless, the presence of oxygen between the Ti and the CNTs signif…
▽ More
We study the interface between carbon nanotubes (CNTs) and surface-deposited titanium using electron microscopy and photoemission spectroscopy, supported by density functional calculations. Charge transfer from the Ti atoms to the nanotube and carbide formation is observed at the interface which indicates strong interaction. Nevertheless, the presence of oxygen between the Ti and the CNTs significantly weakens the Ti?CNT interaction. Ti atoms at the surface will preferentially bond to oxygenated sites. Potential sources of oxygen impurities are examined, namely oxygen from any residual atmosphere and pre-existing oxygen impurities on the nanotube surface, which we enhance through oxygen plasma surface pretreatment. Variation in literature data concerning Ohmic contacts between Ti and carbon nanotubes is explained via sample pre-treatment and differing vacuum levels, and we suggest improved treatment routes for reliable Schottky barrier-free Ti?nanotube contact formation.
△ Less
Submitted 13 October, 2009;
originally announced October 2009.
