-
Analysis of the neutral fluxes in the divertor region of Wendelstein 7-X under attached and detached conditions using EMC3-EIRENE
Authors:
Dieter Boeyaerta,
Yuhe Feng,
Heinke Frerichs,
Thierry Kremeyer,
Dirk Naujoks,
Felix Reimold,
Oliver Schmitz,
Victoria Winters,
Sergey Bozhenkov,
Joris Fellinger,
Marcin Jakubowski,
Ralf König,
Maciej Krychowiak,
Valeria Perseo,
Georg Schlisio,
Uwe Wenzel,
W7-X team
Abstract:
This paper analyzes the neutral fluxes in the divertor region of the W7-X standard configuration for different input powers, both under attached and detached conditions. The performed analysis is conducted through EMC3-EIRENE simulations. They show the importance of the horizontal divertor to generate neutrals, and resolve the neutral plugging in the divertor region. Simulations of detached cases…
▽ More
This paper analyzes the neutral fluxes in the divertor region of the W7-X standard configuration for different input powers, both under attached and detached conditions. The performed analysis is conducted through EMC3-EIRENE simulations. They show the importance of the horizontal divertor to generate neutrals, and resolve the neutral plugging in the divertor region. Simulations of detached cases show a decrease in the number of generated neutrals compared to the attached simulations, in addition to a higher fraction of the ion flux arriving on the baffles during detachment. As the ionization takes place further inside the plasma during detachment, a larger percentage of the generated neutral particles leave the divertor as neutrals. The leakage in the poloidal and toroidal direction increases, just as the fraction of collected particles at the pum** gap. The fraction of pumped particles increases with a factor two, but stays below one percent. This demonstrates that detachment with the current target geometry, although it improves the power exhaust, is not yet leading to an increased particle exhaust.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Simple approach for extending the ambiguity-free-range of dual-comb ranging
Authors:
Jakob Fellinger,
Georg Winkler,
P. E. Collin Aldia,
Aline S. Mayer,
Valentina Shumakova,
Lukas W. Perner,
Vito F. Pecile,
Tadeusz Martynkien,
Pawel Mergo,
Grzegorz Sobo,
Oliver H. Heckl
Abstract:
Dual-comb (DC) ranging is an established method for high-precision and high-accuracy distance measurements. It is, however, restricted by an inherent length ambiguity and the requirement for complex control loops for comb stabilization. Here, we present a simple approach for expanding the ambiguity-free measurement length of dual-comb ranging by exploiting the intrinsic intensity modulation of a s…
▽ More
Dual-comb (DC) ranging is an established method for high-precision and high-accuracy distance measurements. It is, however, restricted by an inherent length ambiguity and the requirement for complex control loops for comb stabilization. Here, we present a simple approach for expanding the ambiguity-free measurement length of dual-comb ranging by exploiting the intrinsic intensity modulation of a single-cavity dualcolor DC for simultaneous time-of-flight a nd D C distance measurements. This measurement approach enables the measurement of distances up to several hundred km with the precision and accuracy of a dualcomb interferometric setup while providing a high data acquisition rate (~2 kHz) and requiring only the repetition rate of one of the combs to be stabilized.
△ Less
Submitted 8 June, 2021;
originally announced June 2021.
-
Compact, all-PM fiber integrated and alignment-free ultrafast Yb:fiber NALM laser with sub-femtosecond timing jitter
Authors:
Yuxuan Ma,
Sarper H. Salman,
Chen Li,
Christoph Mahnke,
Yi Hua,
Stefan Droste,
Jakob Fellinger,
Aline S. Mayer,
Oliver H. Heckl,
Christoph M. Heyl,
Ingmar Hartl
Abstract:
We report a simple and compact design of a dispersion compensated mode-locked Yb:fiber oscillator based on a nonlinear amplifying loop mirror (NALM). The fully polarization maintaining (PM) fiber integrated laser features a chirped fiber Bragg grating (CFBG) for dispersion compensation and a fiber integrated compact non-reciprocal phase bias device, which is alignment-free. The main design paramet…
▽ More
We report a simple and compact design of a dispersion compensated mode-locked Yb:fiber oscillator based on a nonlinear amplifying loop mirror (NALM). The fully polarization maintaining (PM) fiber integrated laser features a chirped fiber Bragg grating (CFBG) for dispersion compensation and a fiber integrated compact non-reciprocal phase bias device, which is alignment-free. The main design parameters were determined by numerically simulating the pulse evolution in the oscillator and by analyzing their impact on the laser performance. Experimentally, we achieved an 88 fs compressed pulse duration with sub-fs timing jitter at 54 MHz repetition rate and 51 mW of output power with 5.5 * 10-5 [20 Hz, 1 MHz] integrated relative intensity noise (RIN). Furthermore, we demonstrate tight phase-locking of the laser's carrier-envelope offset frequency (fceo) to a stable radio frequency (RF) reference and of one frequency comb tooth to a stable optical reference at 291 THz.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
Mid-infrared monocrystalline interference coatings with excess optical loss below 10 ppm
Authors:
G. Winkler,
L. W. Perner,
G. -W. Truong,
G. Zhao,
D. Bachmann,
A. S. Mayer,
J. Fellinger,
D. Follman,
P. Heu,
C. Deutsch,
D. M. Bailey,
H. Peelaers,
S. Puchegger,
A. J. Fleisher,
G. D. Cole,
O. H. Heckl
Abstract:
We present high-reflectivity substrate-transferred single-crystal GaAs/AlGaAs interference coatings at a center wavelength of 4.54 um with record-low excess optical loss below 10 parts per million. These high-performance mirrors are realized via a novel microfabrication process that differs significantly from the production of amorphous multilayers generated via physical vapor deposition processes…
▽ More
We present high-reflectivity substrate-transferred single-crystal GaAs/AlGaAs interference coatings at a center wavelength of 4.54 um with record-low excess optical loss below 10 parts per million. These high-performance mirrors are realized via a novel microfabrication process that differs significantly from the production of amorphous multilayers generated via physical vapor deposition processes. This new process enables reduced scatter loss due to the low surface and interfacial roughness, while low background do** in epitaxial growth ensures strongly reduced absorption. We report on a suite of optical measurements, including cavity ring-down, transmittance spectroscopy, and direct absorption tests to reveal the optical losses for a set of prototype mirrors. In the course of these measurements, we observe a unique polarization-orientation-dependent loss mechanism which we attribute to elastic anisotropy of these strained epitaxial multilayers. A future increase in layer count and a corresponding reduction of transmittance will enable optical resonators with a finesse in excess of 100 000 in the mid-infrared spectral region, allowing for advances in high resolution spectroscopy, narrow-linewidth laser stabilization, and ultrasensitive measurements of various light-matter interactions.
△ Less
Submitted 10 September, 2020;
originally announced September 2020.
-
Flexible all-PM NALM Yb:fiber laser design for frequency comb applications: operation regimes and their noise properties
Authors:
Aline S. Mayer,
Wilfrid Grosinger,
Jakob Fellinger,
Georg Winkler,
Lukas W. Perner,
Stefan Droste,
Sarper H. Salman,
Chen Li,
Christoph M. Heyl,
Ingmar Hartl,
Oliver H. Heckl
Abstract:
We present a flexible all-polarization-maintaining (PM) mode-locked ytterbium (Yb):fiber laser based on a nonlinear amplifying loop mirror (NALM). In addition to providing detailed design considerations, we discuss the different operation regimes accessible by this versatile laser architecture and experimentally analyze five representative mode-locking states. These five states were obtained in a…
▽ More
We present a flexible all-polarization-maintaining (PM) mode-locked ytterbium (Yb):fiber laser based on a nonlinear amplifying loop mirror (NALM). In addition to providing detailed design considerations, we discuss the different operation regimes accessible by this versatile laser architecture and experimentally analyze five representative mode-locking states. These five states were obtained in a 78-MHz configuration at different intracavity group delay dispersion (GDD) values ranging from anomalous (-0.035 ps$^2$) to normal (+0.015 ps$^2$). We put a particular focus on the characterization of the intensity noise as well as the free-running linewidth of the carrier-envelope-offset (CEO) frequency as a function of the different operation regimes. We observe that operation points far from the spontaneous emission peak of Yb (~1030 nm) and close to zero intracavity dispersion can be found, where the influence of pump noise is strongly suppressed. For such an operation point, we show that a CEO linewidth of less than 10-kHz at 1 s integration can be obtained without any active stabilization.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Validating the ASCOT modelling of NBI fast ions in Wendelstein 7-X stellarator
Authors:
S. Äkäslompolo,
P. Drewelow,
Y. Gao,
A. Ali,
C. Biedermann,
S. Bozhenkov,
C. P. Dhard,
M. Endler,
J. Fellinger,
O. P. Ford,
B. Geiger,
J. Geiger,
N. den Harderd,
D. Hartmann,
D. Hathiramani,
M. Isobe,
M. Jakubowski,
Y. Kazakov,
C. Killer,
S. Lazerson,
M. Mayerd,
P. McNeely,
D. Naujoks,
T. W. C. Neelis,
J. Kontula
, et al. (15 additional authors not shown)
Abstract:
The first fast ion experiments in Wendelstein 7-X were performed in 2018. They are one of the first steps in demonstrating the optimised fast ion confinement of the stellarator. The fast ions were produced with a neutral beam injection (NBI) system and detected with infrared cameras (IR), a fast ion loss detector (FILD), fast ion charge exchange spectroscopy (FIDA), and post-mortem analysis of pla…
▽ More
The first fast ion experiments in Wendelstein 7-X were performed in 2018. They are one of the first steps in demonstrating the optimised fast ion confinement of the stellarator. The fast ions were produced with a neutral beam injection (NBI) system and detected with infrared cameras (IR), a fast ion loss detector (FILD), fast ion charge exchange spectroscopy (FIDA), and post-mortem analysis of plasma facing components. The fast ion distribution function in the plasma and at the wall is being modelled with the ASCOT suite of codes. They calculate the ionisation of the injected neutrals and the consecutive slowing down process of the fast ions. The primary output of the code is the multidimensional fast ion distribution function within the plasma and the distribution of particle hit locations and velocities on the wall. Synthetic measurements based on ASCOT output are compared to experimental results to assess the validity of the modelling. This contribution presents an overview of the various fast ion measurements in 2018 and the current modelling status. The validation and data-analysis is on-going, but the wall load IR modelling already yield results that match with the experiments.
△ Less
Submitted 10 September, 2019; v1 submitted 18 June, 2019;
originally announced June 2019.
-
Tunable dual-comb from an all-polarization-maintaining single-cavity dual-color Yb:fiber laser
Authors:
Jakob Fellinger,
Aline S. Mayer,
Georg Winkler,
Wilfrid Grosinger,
Gar-Wing Truong,
Stefan Droste,
Chen Li,
Christoph M. Heyl,
Ingmar Hartl,
Oliver H. Heckl
Abstract:
We demonstrate dual-comb generation from an all-polarization-maintaining dual-color ytterbium (Yb) fiber laser. Two pulse trains with center wavelengths at 1030 nm and 1060 nm respectively are generated within the same laser cavity with a repetition rate around 77 MHz. Dual-color operation is induced using a tunable mechanical spectral filter, which cuts the gain spectrum into two spectral regions…
▽ More
We demonstrate dual-comb generation from an all-polarization-maintaining dual-color ytterbium (Yb) fiber laser. Two pulse trains with center wavelengths at 1030 nm and 1060 nm respectively are generated within the same laser cavity with a repetition rate around 77 MHz. Dual-color operation is induced using a tunable mechanical spectral filter, which cuts the gain spectrum into two spectral regions that can be independently mode-locked. Spectral overlap of the two pulse trains is achieved outside the laser cavity by amplifying the 1030-nm pulses and broadening them in a nonlinear fiber. Spatially overlap** the two arms on a simple photodiode then generates a down-converted radio frequency comb. The difference in repetition rates between the two pulse trains and hence the line spacing of the down-converted comb can easily be tuned in this setup. This feature allows for a flexible adjustment of the tradeoff between non-aliasing bandwidth vs. measurement time in spectroscopy applications. Furthermore, we show that by fine-tuning the center-wavelengths of the two pulse trains, we are able to shift the down-converted frequency comb along the radio-frequency axis. The usability of this dual-comb setup is demonstrated by measuring the transmission of two different etalons while the laser is completely free-running.
△ Less
Submitted 7 June, 2019;
originally announced June 2019.
-
Validating fast-ion wall-load IR analysis-methods against W7-X NBI empty-torus experiment
Authors:
S. Äkäslompolo,
P. Drewelow,
Y. Gao,
A. Ali,
O. Asunta,
S. Bozhenkov,
J. Fellinger,
O. P. Ford,
N. den Harder,
D. Hartmann,
M. Jakubowski,
P. McNeely,
H. Niemann,
F. Pisano,
N. Rust,
A. Puig Sitjes,
M. Sleczka,
A. Spanier,
R. C. Wolf,
the W7-X Team
Abstract:
The first neutral beam injection (NBI) experiments in Wendelstein 7-X (W7-X) stellarator were conducted in the summer of 2018. The NBI system is used to heat the magnetically confined plasma by neutralising an accelerated hydrogen ion beam and directing it into the plasma, where the resulting energetic ions release their energy to heat the plasma. The modelling of the NBI fast ion experiments has…
▽ More
The first neutral beam injection (NBI) experiments in Wendelstein 7-X (W7-X) stellarator were conducted in the summer of 2018. The NBI system is used to heat the magnetically confined plasma by neutralising an accelerated hydrogen ion beam and directing it into the plasma, where the resulting energetic ions release their energy to heat the plasma. The modelling of the NBI fast ion experiments has commenced, including estimation of the shine-through and the orbit-losses. The stellarator has a wide-angle infra red (IR) imaging system to monitor the machine plasma facing component surface temperatures. This work validates the NBI model "Beamlet Based NBI (BBNBI)" and the newly written synthetic IR camera model. The validation is accomplished by comparing the measured and the synthetic IR camera measurements of an experiment where the NBI was injected into the vacuum vessel without a plasma. A good qualitative and quantitative match was found. This agreement is further supported by spectroscopic and calibration measurements of the NBI and and IR camera systems.
△ Less
Submitted 20 June, 2019; v1 submitted 6 June, 2019;
originally announced June 2019.
-
Non-planar femtosecond enhancement cavity for VUV frequency comb applications
Authors:
Georg Winkler,
Jakob Fellinger,
Jozsef Seres,
Enikoe Seres,
Thorsten Schumm
Abstract:
External passive femtosecond enhancement cavities (fsECs) are widely used to increase the efficiency of non-linear conversion processes like high harmonic generation (HHG) at high repetition rates. Their performance is often limited by beam ellipticity, caused by oblique incidence on spherical focusing mirrors. We introduce a novel three-dimensionally folded variant of the typical planar bow-tie r…
▽ More
External passive femtosecond enhancement cavities (fsECs) are widely used to increase the efficiency of non-linear conversion processes like high harmonic generation (HHG) at high repetition rates. Their performance is often limited by beam ellipticity, caused by oblique incidence on spherical focusing mirrors. We introduce a novel three-dimensionally folded variant of the typical planar bow-tie resonator geometry that guarantees circular beam profiles, maintains linear polarization, and allows for a significantly tighter focus as well as a larger beam cross-section on the cavity mirrors. The scheme is applied to improve focusing in a Ti:Sapphire based VUV frequency comb system, targeting the 5th harmonic around 160 nm (7.8 eV) towards high-precision spectroscopy of the low-energy isomer state of Thorium-229. It will also be beneficial in fsEC-applications with even higher seeding and intracavity power where the damage threshold of the mirrors becomes a major concern.
△ Less
Submitted 11 January, 2016;
originally announced January 2016.
