-
Encircling exceptional points as a non-Hermitian extension of rapid adiabatic passage
Authors:
Juraj Feilhauer,
Alexander Schumer,
Jörg Doppler,
Alexei A. Mailybaev,
Julian Böhm,
Ulrich Kuhl,
Nimrod Moiseyev,
Stefan Rotter
Abstract:
The efficient transfer of excitations between different levels of a quantum system is a task with many applications. Among the various protocols to carry out such a state transfer in driven systems, rapid adiabatic passage (RAP) is one of the most widely used. Here we show both theoretically and experimentally that adding a suitable amount of loss to the driven Hamiltonian turns a RAP protocol int…
▽ More
The efficient transfer of excitations between different levels of a quantum system is a task with many applications. Among the various protocols to carry out such a state transfer in driven systems, rapid adiabatic passage (RAP) is one of the most widely used. Here we show both theoretically and experimentally that adding a suitable amount of loss to the driven Hamiltonian turns a RAP protocol into a scheme for encircling an exceptional point including the chiral state transfer associated with it. Our work thus discloses an intimate connection between a whole body of literature on RAP and recent studies on the dynamics in the vicinity of an exceptional point, which we expect to serve as a bridge between the disjoint communities working on these two scenarios.
△ Less
Submitted 11 April, 2020;
originally announced April 2020.
-
Controlled motion of skyrmions in a magnetic antidot lattice
Authors:
J. Feilhauer,
S. Saha,
J. Tobik,
M. Zelent,
L. J. Heyderman,
M. Mruczkiewicz
Abstract:
Future spintronic devices based on skyrmions will require precise control of the skyrmion motion. We show that this goal can be achieved through the use of magnetic antidot arrays. With micromagnetic simulations and semi-analytical calculations based on Thiele equation, we demonstrate that an antidot array can guide the skyrmions in different directions depending on the parameters of the applied c…
▽ More
Future spintronic devices based on skyrmions will require precise control of the skyrmion motion. We show that this goal can be achieved through the use of magnetic antidot arrays. With micromagnetic simulations and semi-analytical calculations based on Thiele equation, we demonstrate that an antidot array can guide the skyrmions in different directions depending on the parameters of the applied current pulse. Despite the fixed direction of the net driving current, due to the non-trivial interplay between the repulsive potential introduced by the antidots, the skyrmion Hall effect and the non-uniform current distribution, full control of skyrmion motion in a 2D lattice can be achieved. Moreover, we demonstrate that the direction of skyrmion motion can be controlled by tuning only a single parameter of the current pulse, i.e. current magnitude. For lower current magnitudes the skyrmion can be moved perpendicularly to the current direction, and can overcome the skyrmion Hall effect. For larger current magnitudes, the skyrmion Hall effect can be effectively suppressed and skyrmions can move parallel to the applied current.
△ Less
Submitted 16 October, 2019;
originally announced October 2019.
-
Nonequilibrium mesoscopic conductance fluctuations as the origin of 1/f noise in epitaxial graphene
Authors:
Cay-Christian Kalmbach,
Franz Josef Ahlers,
Jürgen Schurr,
André Müller,
Juraj Feilhauer,
Mattias Kruskopf,
Klaus Pierz,
Frank Hohls,
Rolf J. Haug
Abstract:
We investigate the 1/f noise properties of epitaxial graphene devices at low temperatures as a function of temperature, current and magnetic flux density. At low currents, an exponential decay of the 1/f noise power spectral density with increasing temperature is observed that indicates mesoscopic conductance fluctuations as the origin of 1/f noise at temperatures below 50 K. At higher currents, d…
▽ More
We investigate the 1/f noise properties of epitaxial graphene devices at low temperatures as a function of temperature, current and magnetic flux density. At low currents, an exponential decay of the 1/f noise power spectral density with increasing temperature is observed that indicates mesoscopic conductance fluctuations as the origin of 1/f noise at temperatures below 50 K. At higher currents, deviations from the typical quadratic current dependence and the exponential temperature dependence occur as a result of nonequilibrium conditions due to current heating. By applying the theory of Kubakaddi [S. S. Kubakaddi, Phys. Rev. B 79, 075417 (2009)], a model describing the 1/f noise power spectral density of nonequilibrium mesoscopic conductance fluctuations in epitaxial graphene is developed and used to determine the energy loss rate per carrier. In the regime of Shubnikov-de Haas oscillations a strong increase of 1/f noise is observed, which we attribute to an additional conductance fluctuation mechanism due to localized states in quantizing magnetic fields. When the device enters the regime of quantized Hall resistance, the 1/f noise vanishes. It reappears if the current is increased and the quantum Hall breakdown sets in.
△ Less
Submitted 16 September, 2016;
originally announced September 2016.
-
Merging of the Dirac points in electronic artificial graphene
Authors:
J. Feilhauer,
W. Apel,
L. Schweitzer
Abstract:
Theory predicts that graphene under uniaxial compressive strain in an armchair direction should undergo a topological phase transition from a semimetal into an insulator. Due to the change of the hop** integrals under compression, both Dirac points shift away from the corners of the Brillouin zone towards each other. For sufficiently large strain, the Dirac points merge and an energy gap appears…
▽ More
Theory predicts that graphene under uniaxial compressive strain in an armchair direction should undergo a topological phase transition from a semimetal into an insulator. Due to the change of the hop** integrals under compression, both Dirac points shift away from the corners of the Brillouin zone towards each other. For sufficiently large strain, the Dirac points merge and an energy gap appears. However, such a topological phase transition has not yet been observed in normal graphene (due to its large stiffness) neither in any other electronic system. We show numerically and analytically that such a merging of the Dirac points can be observed in electronic artificial graphene created from a two-dimensional electron gas by application of a triangular lattice of repulsive antidots. Here, the effect of strain is modeled by tuning the distance between the repulsive potentials along the armchair direction. Our results show that the merging of the Dirac points should be observable in a recent experiment with molecular graphene.
△ Less
Submitted 13 August, 2015;
originally announced August 2015.
-
Coexistence of diffusive resistance and ballistic persistent current in disordered metallic rings with rough edges: Possible origin of puzzling experimental values
Authors:
J. Feilhauer,
M. Mosko
Abstract:
Typical persistent current ($I_{typ}$) in a mesoscopic normal metal ring with disorder due to rough edges and random grain boundaries is calculated by a scattering matrix method. In addition, resistance of a corresponding metallic wire is obtained from the Landauer formula and the electron mean free path ($l$) is determined. If disorder is due to the rough edges, a ballistic persistent current…
▽ More
Typical persistent current ($I_{typ}$) in a mesoscopic normal metal ring with disorder due to rough edges and random grain boundaries is calculated by a scattering matrix method. In addition, resistance of a corresponding metallic wire is obtained from the Landauer formula and the electron mean free path ($l$) is determined. If disorder is due to the rough edges, a ballistic persistent current $I_{typ} \simeq e v_F/L$ is found to coexist with the diffusive resistance ($ \propto L/l$), where $v_F$ is the Fermi velocity and $L \gg l$ is the ring length. This ballistic current is due to a single electron that moves almost in parallel with the rough edges and thus hits them rarely (it is shown that this parallel motion exists in the ring geometry owing to the Hartree-Fock interaction). Our finding agrees with a puzzling experimental result $I_{typ}\simeq e v_F/L$, reported by Chandrasekhar et al. [Phys. Rev. Lett. \textbf{67}, 3578 (1991)] for metallic rings of length $L \simeq 100 l$. If disorder is due to the grain boundaries, our data reproduce theoretical result $I_{typ}\simeq (e v_F/L) (l/L)$ that holds for the white-noise-like disorder and has been observed in recent experiments. Thus, result $I_{typ}\simeq e v_F/L$ in a disordered metallic ring of length $L \gg l$ is as normal as result $I_{typ}\simeq (e v_F/L)(l/L)$. Which result is observed depends on the nature of disorder. Experiments that would determine $I_{typ}$ and $l$ in correlation with the nature of disorder can be instructive.
△ Less
Submitted 6 September, 2013;
originally announced September 2013.
-
Ballistic persistent currents in disordered metallic rings: Origin of puzzling experimental values
Authors:
J. Feilhauer,
M. Mosko
Abstract:
Typical persistent current ($I_{typ}$) in a normal metal ring with disorder due to random grain boundaries and rough edges is calculated microscopically. If disorder is due to the rough edges, a ballistic current $I_{typ}\simeq e v_F/L$ is found in spite of the diffusive resistance ($ \propto L/l$), where $v_F$ is the Fermi velocity, $l$ is the mean free path, and $L \gg l$ is the ring length. Thi…
▽ More
Typical persistent current ($I_{typ}$) in a normal metal ring with disorder due to random grain boundaries and rough edges is calculated microscopically. If disorder is due to the rough edges, a ballistic current $I_{typ}\simeq e v_F/L$ is found in spite of the diffusive resistance ($ \propto L/l$), where $v_F$ is the Fermi velocity, $l$ is the mean free path, and $L \gg l$ is the ring length. This ballistic current has a simple interpretation: It is due to a single coherent electron that moves in parallel with the edges and thus does not feel the roughness. Our calculations explain a puzzling experimental result $I_{typ}\simeq e v_F/L$, reported by Chandrasekhar et al. [Phys. Rev. Lett. 67, 3578 (1991)] for metal rings of length $L \simeq 100 l$. If disorder is due to the grain boundaries, our results agree with diffusive result $I_{typ}\simeq (e v_F/L) (l/L)$, derived by Cheung et al. [Phys. Rev. Lett. 62, 587 (1989)] and observed by Bluhm et al. [Phys. Rev. Lett. 102, 136802 (2009)] and Bleszynsky-Jayich et al. [Science 326, 272 (2009)].
△ Less
Submitted 14 December, 2012; v1 submitted 29 March, 2012;
originally announced March 2012.
-
Conductance and persistent current in quasi-one-dimensional systems with grain boundaries: Effects of the strongly reflecting and columnar grains
Authors:
J. Feilhauer,
M. Mosko
Abstract:
We study mesoscopic transport in the Q1D wires and rings made of a 2D conductor of width W and length L >> W. Our aim is to compare an impurity-free conductor with grain boundaries with a grain-free conductor with impurity disorder. A single grain boundary is modeled as a set of the 2D-$δ$-function-like barriers positioned equidistantly on a straight line and disorder is emulated by a large number…
▽ More
We study mesoscopic transport in the Q1D wires and rings made of a 2D conductor of width W and length L >> W. Our aim is to compare an impurity-free conductor with grain boundaries with a grain-free conductor with impurity disorder. A single grain boundary is modeled as a set of the 2D-$δ$-function-like barriers positioned equidistantly on a straight line and disorder is emulated by a large number of such straight lines, intersecting the conductor with random orientation in random positions. The impurity disorder is modeled by the 2D $δ$-barriers with the randomly chosen positions and signs. The electron transmission through the wires is calculated by the scattering-matrix method, and the Landauer conductance is obtained. We calculate the persistent current in the rings threaded by magnetic flux: We incorporate into the scattering-matrix method the flux-dependent cyclic boundary conditions and we introduce a trick allowing to study the persistent currents in rings of almost realistic size. We mainly focus on the numerical results for L much larger than the electron mean-free path, when the transport is diffusive. If the grain boundaries are weakly reflecting, the systems with grain boundaries show the same (mean) conductance and the same (typical) persistent current as the systems with impurities, and the results also agree with the single-particle theories treating disorder as a white-noise-like potential. If the grain boundaries are strongly reflecting, the typical persistent currents can be about three times larger than the results of the white-noise-based theory, thus resembling the experimental results of Jariwala et al. (PRL 2001). We extend our study to the 3D conductors with columnar grains. We find that the persistent current exceeds the white-noise-based result by another one order of magnitude, similarly as in the experiment of Chandrasekhar et al. (PRL 1991).
△ Less
Submitted 16 June, 2011; v1 submitted 3 December, 2010;
originally announced December 2010.
-
Quantum and Boltzmann transport in the quasi-one-dimensional wire with rough edges
Authors:
J. Feilhauer,
M. Mosko
Abstract:
We study quantum transport in Q1D wires made of a 2D conductor of width W and length L>>W. Our aim is to compare an impurity-free wire with rough edges with a smooth wire with impurity disorder. We calculate the electron transmission through the wires by the scattering-matrix method, and we find the Landauer conductance for a large ensemble of disordered wires. We study the impurity-free wire whos…
▽ More
We study quantum transport in Q1D wires made of a 2D conductor of width W and length L>>W. Our aim is to compare an impurity-free wire with rough edges with a smooth wire with impurity disorder. We calculate the electron transmission through the wires by the scattering-matrix method, and we find the Landauer conductance for a large ensemble of disordered wires. We study the impurity-free wire whose edges have a roughness correlation length comparable with the Fermi wave length. The mean resistance <ρ> and inverse mean conductance 1/<g> are evaluated in dependence on L. For L -> 0 we observe the quasi-ballistic dependence 1/<g> = <ρ> = 1/N_c + ρ_{qb} L/W, where 1/N_c is the fundamental contact resistance and ρ_{qb} is the quasi-ballistic resistivity. As L increases, we observe crossover to the diffusive dependence 1/<g> = <ρ> = 1/N^{eff}_c + ρ_{dif} L/W, where ρ_{dif} is the resistivity and 1/N^{eff}_c is the effective contact resistance corresponding to the N^{eff}_c open channels. We find the universal results ρ_{qb}/ρ_{dif} = 0.6N_c and N^{eff}_c = 6 for N_c >> 1. As L exceeds the localization length ξ, the resistance shows onset of localization while the conductance shows the diffusive dependence 1/<g> = 1/N^{eff}_c + ρ_{dif} L/W up to L = 2ξand the localization for L > 2ξonly. On the contrary, for the impurity disorder we find a standard diffusive behavior, namely 1/<g> = <ρ> = 1/N_c + ρ_{dif} L/W for L < ξ. We also derive the wire conductivity from the semiclassical Boltzmann equation, and we compare the semiclassical electron mean-free path with the mean free path obtained from the quantum resistivity ρ_{dif}. They coincide for the impurity disorder, however, for the edge roughness they strongly differ, i.e., the diffusive transport is not semiclassical. It becomes semiclassical for the edge roughness with large correlation length.
△ Less
Submitted 26 April, 2011; v1 submitted 29 November, 2010;
originally announced November 2010.
