-
A community-led calibration of the Zr isotope Reference Materials: NIST candidate RM 8299 and SRM 3169
Authors:
François L. H. Tissot,
Mauricio Ibañez-Mejia,
Savelas A. Rabb,
Rebecca A. Kraft,
Robert D. Vocke,
Manuela A. Fehr,
Maria Schönbächler,
Haolan Tang,
Edward D. Young
Abstract:
As the field of Zr stable isotopes is rapidly expanding from the study of mass-independent to that of mass-dependent isotope effects, a variety of Zr standards have appeared in the literature. While several of these standards have been proposed as the ideal isotope reference material (iRM) against which all data should be reported, none of them have been shown to meet the compositional and/or conf…
▽ More
As the field of Zr stable isotopes is rapidly expanding from the study of mass-independent to that of mass-dependent isotope effects, a variety of Zr standards have appeared in the literature. While several of these standards have been proposed as the ideal isotope reference material (iRM) against which all data should be reported, none of them have been shown to meet the compositional and/or conflict-of-interest-free distribution requirements put forth by the community. To remedy this situation, we report on a community-led effort to develop and calibrate a scale defining iRM for Zr isotopes: NIST RM 8299. Developed in partnership with the National Institute of Standards and Technology (NIST) from the widely used SRM 3169 Zr Standard Solution, the candidate RM 8299 was calibrated through an inter-laboratory study involving three laboratories. Our data show that RM 8299 meets all requirements of an ideal iRM. It is an isotopically homogeneous, high-purity reference material, that is free of isotope anomalies, and whose composition is identical to that of a major geological reservoir (Ocean Island Basalts). Furthermore, RM 8299 will be curated and distributed by NIST, a neutral, conflict-of-interest free organization, and was produced in sufficient quantities to last multiple decades. We recommend that all Zr isotope data to be reported against RM 8299. Our results also show that SRM 3169 lots #130920 and #071226 have identical composition to RM 8299. Therefore, using RM 8299 as the scale defining iRM will enable direct comparison of all future data with the vast majority of the existing literature data, both for mass-independent and mass-dependent isotope effects. To facilitate conversion of d94/90Zr values reported against other Zr standards, we provide high-precision conversion factors to the RM 8299 scale obtained using the double-spike method.
△ Less
Submitted 30 January, 2024;
originally announced April 2024.
-
Room Temperature Dynamics of an Optically Addressable Single Spin in Hexagonal Boron Nitride
Authors:
Raj N. Patel,
Rebecca E. K. Fishman,
Tzu-Yung Huang,
Jordan A. Gusdorff,
David A. Fehr,
David A. Hopper,
S. Alex Breitweiser,
Benjamin Porat,
Michael E. Flatté,
Lee C. Bassett
Abstract:
Hexagonal boron nitride (h-BN) hosts pure single-photon emitters that have shown evidence of optically detected electronic spin dynamics. However, the electrical and chemical structure of these optically addressable spins is unknown, and the nature of their spin-optical interactions remains mysterious. Here, we use time-domain optical and microwave experiments to characterize a single emitter in h…
▽ More
Hexagonal boron nitride (h-BN) hosts pure single-photon emitters that have shown evidence of optically detected electronic spin dynamics. However, the electrical and chemical structure of these optically addressable spins is unknown, and the nature of their spin-optical interactions remains mysterious. Here, we use time-domain optical and microwave experiments to characterize a single emitter in h-BN exhibiting room temperature optically detected magnetic resonance. Using dynamical simulations, we constrain and quantify transition rates in the model, and we design optical control protocols that optimize the signal-to-noise ratio for spin readout. This constitutes a necessary step towards quantum control of spin states in h-BN.
△ Less
Submitted 8 November, 2023; v1 submitted 11 September, 2023;
originally announced September 2023.
-
Millimeter Dust Emission and Planetary Dynamics in the HD 106906 System
Authors:
Anna Fehr,
A. Meredith Hughes,
Rebekah I. Dawson,
Rachel E. Marino,
Matan Ackelsberg,
Jamar Kittling,
Kevin M. Flaherty,
Erika Nesvold,
John Carpenter,
Sean M. Andrews,
Brenda Matthews,
Katie Crotts,
Paul Kalas
Abstract:
Debris disks are dusty, optically thin structures around main sequence stars. HD 106906AB is a short-period stellar binary, host to a wide separation planet, HD 106906b, and a debris disk. Only a few known systems include a debris disk and a directly imaged planet, and HD 106906 is the only one in which the planet is exterior to the disk. The debris disk is edge-on and highly asymmetric in scatter…
▽ More
Debris disks are dusty, optically thin structures around main sequence stars. HD 106906AB is a short-period stellar binary, host to a wide separation planet, HD 106906b, and a debris disk. Only a few known systems include a debris disk and a directly imaged planet, and HD 106906 is the only one in which the planet is exterior to the disk. The debris disk is edge-on and highly asymmetric in scattered light. Here we resolve the disk structure at a resolution of 0.38" (39 au) with the Atacama Large Millimeter/submillimeter Array (ALMA) at a wavelength of 1.3 mm. We model the disk with both a narrow and broad ring of material, and find that a radially broad, axisymmetric disk between radii of $\sim$50$-$100 au is able to capture the structure of the observations without evidence of any asymmetry or eccentricity, other than a tentative stellocentric offset. We place stringent upper limits on both the gas and dust content of a putative circumplanetary disk. We interpret the ALMA data in concert with scattered light observations of the inner ring and astrometric constraints on the planet's orbit, and find that the observations are consistent with a large-separation, low-eccentricity orbit for the planet. A dynamical analysis indicates that the central binary can efficiently stabilize planetesimal orbits interior to $\sim$100 au, which relaxes the constraints on eccentricity and semimajor axis somewhat. The observational constraints are consistent with in situ formation via gravitational instability, but cannot rule out a scattering event as the origin for HD 106906b's current orbit.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
Direct visualization of ultrafast lattice ordering triggered by an electron-hole plasma in 2D perovskites
Authors:
Hao Zhang,
Wenbin Li,
Joseph Essman,
Claudio Quarti,
Isaac Metcalf,
Wei-Yi Chiang,
Siraj Sidhik,
** Hou,
Austin Fehr,
Andrew Attar,
Ming-Fu Lin,
Alexander Britz,
Xiaozhe Shen,
Stephan Link,
Xijie Wang,
Uwe Bergmann,
Mercouri G. Kanatzidis,
Claudine Katan,
Jacky Even,
Jean-Christophe Blancon,
Aditya D. Mohite
Abstract:
Direct visualization of ultrafast coupling between charge carriers and lattice degrees of freedom in photo-excited semiconductors has remained a long-standing challenge and is critical for understanding the light-induced physical behavior of materials under extreme non-equilibrium conditions. Here, by monitoring the evolution of the wave-vector resolved ultrafast electron diffraction intensity fol…
▽ More
Direct visualization of ultrafast coupling between charge carriers and lattice degrees of freedom in photo-excited semiconductors has remained a long-standing challenge and is critical for understanding the light-induced physical behavior of materials under extreme non-equilibrium conditions. Here, by monitoring the evolution of the wave-vector resolved ultrafast electron diffraction intensity following above-bandgap photo-excitation, we obtain a direct visual of the structural dynamics in monocrystalline 2D perovskites. Analysis reveals a surprising, light-induced ultrafast lattice ordering resulting from a strong interaction between hot-carriers and the perovskite lattice, which induces an in-plane octahedra rotation, towards a more symmetric phase. Correlated ultrafast spectroscopy performed at the same carrier density as ultrafast electron diffraction reveals that the creation of a hot and dense electron-hole plasma triggers lattice ordering at short timescales by modulating the crystal cohesive energy. Finally, we show that the interaction between the carrier gas and the lattice can be altered by tailoring the rigidity of the 2D perovskite by choosing the appropriate organic spacer layer.
△ Less
Submitted 3 April, 2022;
originally announced April 2022.
-
Resolving Structure in the Debris Disk around HD 206893 with ALMA
Authors:
Ava Nederlander,
A. Meredith Hughes,
Anna J. Fehr,
Kevin M. Flaherty,
Kate Y. L. Su,
Attila Moor,
Eugene Chiang,
Sean M. Andrews,
David J. Wilner,
Sebastian Marino
Abstract:
Debris disks are tenuous, dusty belts surrounding main sequence stars generated by collisions between planetesimals. HD 206893 is one of only two stars known to host a directly imaged brown dwarf orbiting interior to its debris ring, in this case at a projected separation of 10.4 au. Here we resolve structure in the debris disk around HD 206893 at an angular resolution of 0.6" (24 au) and waveleng…
▽ More
Debris disks are tenuous, dusty belts surrounding main sequence stars generated by collisions between planetesimals. HD 206893 is one of only two stars known to host a directly imaged brown dwarf orbiting interior to its debris ring, in this case at a projected separation of 10.4 au. Here we resolve structure in the debris disk around HD 206893 at an angular resolution of 0.6" (24 au) and wavelength of 1.3 mm with the Atacama Large Millimeter/submillimeter Array (ALMA). We observe a broad disk extending from a radius of <51 au to 194^{+13}_{-2} au. We model the disk with a continuous, gapped, and double power-law model of the surface density profile, and find strong evidence for a local minimum in the surface density distribution near a radius of 70 au, consistent with a gap in the disk with an inner radius of 63^{+8}_{-16} au and width 31^{+11}_{-7} au. Gapped structure has been observed in four other debris disks -- essentially every other radially resolved debris disk observed with sufficient angular resolution and sensitivity with ALMA -- and could be suggestive of the presence of an additional planetary-mass companion.
△ Less
Submitted 21 January, 2021;
originally announced January 2021.
-
MuPix and ATLASPix -- Architectures and Results
Authors:
A. Schöning,
J. Anders,
H. Augustin,
M. Benoit,
N. Berger,
S. Dittmeier,
F. Ehrler,
A. Fehr,
T. Golling,
S. Gonzalez Sevilla,
J. Hammerich,
A. Herkert,
L. Huth,
G. Iacobucci,
D. Immig,
M. Kiehn,
J. Kröger,
F. Meier,
A. Meneses Gonzalez,
A. Miucci,
L. O. S. Noehte,
I. Peric,
M. Prathapan,
T. Rudzki,
R. Schimassek
, et al. (7 additional authors not shown)
Abstract:
High Voltage Monolithic Active Pixel Sensors (HV-MAPS) are based on a commercial High Voltage CMOS process and collect charge by drift inside a reversely biased diode. HV-MAPS represent a promising technology for future pixel tracking detectors. Two recent developments are presented. The MuPix has a continuous readout and is being developed for the Mu3e experiment whereas the ATLASPix is being dev…
▽ More
High Voltage Monolithic Active Pixel Sensors (HV-MAPS) are based on a commercial High Voltage CMOS process and collect charge by drift inside a reversely biased diode. HV-MAPS represent a promising technology for future pixel tracking detectors. Two recent developments are presented. The MuPix has a continuous readout and is being developed for the Mu3e experiment whereas the ATLASPix is being developed for LHC applications with a triggered readout. Both variants have a fully monolithic design including state machines, clock circuitries and serial drivers. Several prototypes and design variants were characterised in the lab and in testbeam campaigns to measure efficiencies, noise, time resolution and radiation tolerance. Results from recent MuPix and ATLASPix prototypes are presented and prospects for future improvements are discussed.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
Electrical characterization of AMS aH18 HV-CMOS after neutrons and protons irradiation
Authors:
D M S Sultan,
Sergio Gonzalez Sevilla,
Didier Ferrere,
Giuseppe Iacobucci,
Ettore Zaffaroni,
Winnie Wong,
Mateus Vicente Barrero Pinto,
Moritz Kiehn,
Mridula Prathapan,
Felix Ehrler,
Ivan Peric,
Antonio Miucci,
John Kenneth Anders,
Armin Fehr,
Michele Weber,
Andre Schoening,
Adrian Herkert,
Heiko Augustin,
Mathieu Benoit
Abstract:
In view of the tracking detector application to the ATLAS High Luminosity LHC (HL-LHC) upgrade, we have developed a new generation of High Voltage CMOS (HV-CMOS) monolithic pixel-sensor prototypes featuring the AMS aH18 (180 nm) commercial CMOS technology. By fully integrating both analog and digital readout-circuitry on the same particle-detecting substrate, current challenges of hybrid sensor te…
▽ More
In view of the tracking detector application to the ATLAS High Luminosity LHC (HL-LHC) upgrade, we have developed a new generation of High Voltage CMOS (HV-CMOS) monolithic pixel-sensor prototypes featuring the AMS aH18 (180 nm) commercial CMOS technology. By fully integrating both analog and digital readout-circuitry on the same particle-detecting substrate, current challenges of hybrid sensor technologies, i.e., larger readout input-capacitance, lower production-yield, and higher production and integration cost, can be downscaled. The large electrode design using high-resistivity substrates actively helps to mitigate the charge-trap** effects, making these chips radiation hard. The surface and bulk damage induced in high irradiation environment change the effective do** concentration of the device, which modulates high electric fields as the reverse-bias voltage increases. This effect can cause high leakage current and premature electrical breakdown, driven by impact ionization. In order to assess the characteristics of heavily irradiated samples, we have carried out dedicated campaigns on ATLASPix1 chips that included irradiations of neutrons and protons, made at different facilities. Here, we report on the electrical characterization of the irradiated samples at different ambient conditions, also in comparison to their pre-irradiation properties. Results demonstrate that hadron irradiated devices can be safely operated at a voltage high enough to allow for high efficiency, up to the fluence of 2E15 neq/cm2, beyond the radiation levels (TID and NIEL) expected in the outermost pixel layers of the new ATLAS tracker for HL-LHC.
△ Less
Submitted 28 May, 2020; v1 submitted 15 February, 2019;
originally announced February 2019.
-
Charge collection characterisation with the Transient Current Technique of the ams H35DEMO CMOS detector after proton irradiation
Authors:
John Anders,
Mathieu Benoit,
Saverio Braccini,
Raimon Casanova,
Hucheng Chen,
Kai Chen,
Francesco Armando di Bello,
Armin Fehr,
Didier Ferrere,
Dean Forshaw,
Tobias Golling,
Sergio Gonzalez-Sevilla,
Giuseppe Iacobucci,
Moritz Kiehn,
Francesco Lanni,
Hongbin Liu,
Lingxin Meng,
Claudia Merlassino,
Antonio Miucci,
Marzio Nessi,
Ivan Perić,
Marco Rimoldi,
D M S Sultan,
Mateus Vincente Barreto Pinto,
Eva Vilella
, et al. (4 additional authors not shown)
Abstract:
This paper reports on the characterisation with Transient Current Technique measurements of the charge collection and depletion depth of a radiation-hard high-voltage CMOS pixel sensor produced at ams AG. Several substrate resistivities were tested before and after proton irradiation with two different sources: the 24 GeV Proton Synchrotron at CERN and the 16.7 MeV Cyclotron at Bern Inselspital.
This paper reports on the characterisation with Transient Current Technique measurements of the charge collection and depletion depth of a radiation-hard high-voltage CMOS pixel sensor produced at ams AG. Several substrate resistivities were tested before and after proton irradiation with two different sources: the 24 GeV Proton Synchrotron at CERN and the 16.7 MeV Cyclotron at Bern Inselspital.
△ Less
Submitted 25 July, 2018;
originally announced July 2018.
-
A facility for radiation hardness studies based on the Bern medical cyclotron
Authors:
John Anders,
Saverio Braccini,
Tommaso Carzaniga,
Antonio Ereditato,
Armin Fehr,
Federico Meloni,
Claudia Merlassino,
Antonio Miucci,
Marco Rimoldi,
Michele Weber
Abstract:
The development of instrumentation to be operated in high-radiation environments is one of the main challenges in fundamental research. Besides space and nuclear applications, particle physics experiments also need radiation-hard devices. The focus of this paper is a new irradiation facility based on the medical cyclotron located at the Bern University Hospital (Insespital), which is used as a con…
▽ More
The development of instrumentation to be operated in high-radiation environments is one of the main challenges in fundamental research. Besides space and nuclear applications, particle physics experiments also need radiation-hard devices. The focus of this paper is a new irradiation facility based on the medical cyclotron located at the Bern University Hospital (Insespital), which is used as a controlled 18 MeV proton source. The adjustable beam current allows for dose rate dependent characterisation over a large dynamic range, from 0.1 to 1000 Grad per hour. The beam can be tuned so that the user can obtain the desired irradiation conditions. A complete study of the device under irradiation is possible thanks to dedicated beam monitoring systems as well as a power control system for the device under irradiation, which can be operated on-line. Further characterisations of the irradiated devices are possible thanks to a laboratory equipped with gamma spectroscopy detectors, ammeters and transient current technique setups.
△ Less
Submitted 5 March, 2018;
originally announced March 2018.