Showing 1–48 of 48 results for author: Fedoseev, A

GazeRace: Revolutionizing Remote Piloting with Eye-Gaze Control

Authors: Issatay Tokmurziyev, Valerii Serpiva, Alexey Fedoseev, Miguel Altamirano Cabrera, Dzmitry Tsetserukou

Abstract: This paper introduces the GazeRace method for drone navigation, employing a computer vision interface facilitated by eye-tracking technology. This interface is designed to be compatible with a single camera and uses a convolutional neural network to convert eye movements into control commands for the drone. Experimental validation demonstrates that users equipped with the eye-tracking interface ac… ▽ More This paper introduces the GazeRace method for drone navigation, employing a computer vision interface facilitated by eye-tracking technology. This interface is designed to be compatible with a single camera and uses a convolutional neural network to convert eye movements into control commands for the drone. Experimental validation demonstrates that users equipped with the eye-tracking interface achieve comparable performance to a traditional remote control interface when completing a drone racing task. Ten participants completed flight tests in which they navigated a drone through a racing track in a Gazebo simulation environment. Users reduced drone trajectory length by 18% (73.44 m vs. 89.29 m) using the eye-tracking interface to navigate racing gates effectively. The time taken to complete the route using the eye-tracking method (average of 70.01 seconds) was only 3.5% slower than using the remote control method (also average of 70.01 seconds), indicating the good efficiency of the interface. It is also worth mentioning that four of the participants completed the race with an average time that was 25.9% faster than the other participants. In addition, users evaluated highly the performance (M = 34.0, SD = 14.2) and low frustration (M = 30.5, SD = 9.2) with the eye-tracking interface compared to performance (M = 63.0, SD = 10.1) and frustration (M = 49.0, SD = 11.7) with the baseline remote controller. The hedonic quality (M = 1.65, SD = 0.45) was also evaluated high by the users in the UEQ questionnaire. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Comments: Accepted in: IEEE International Conference on Systems, Man, and Cybernetics (SMC 2024)

TornadoDrone: Bio-inspired DRL-based Drone Landing on 6D Platform with Wind Force Disturbances

Authors: Robinroy Peter, Lavanya Ratnabala, Demetros Aschu, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Autonomous drone navigation faces a critical challenge in achieving accurate landings on dynamic platforms, especially under unpredictable conditions such as wind turbulence. Our research introduces TornadoDrone, a novel Deep Reinforcement Learning (DRL) model that adopts bio-inspired mechanisms to adapt to wind forces, mirroring the natural adaptability seen in birds. This model, unlike tradition… ▽ More Autonomous drone navigation faces a critical challenge in achieving accurate landings on dynamic platforms, especially under unpredictable conditions such as wind turbulence. Our research introduces TornadoDrone, a novel Deep Reinforcement Learning (DRL) model that adopts bio-inspired mechanisms to adapt to wind forces, mirroring the natural adaptability seen in birds. This model, unlike traditional approaches, derives its adaptability from indirect cues such as changes in position and velocity, rather than direct wind force measurements. TornadoDrone was rigorously trained in the gym-pybullet-drone simulator, which closely replicates the complexities of wind dynamics in the real world. Through extensive testing with Crazyflie 2.1 drones in both simulated and real windy conditions, TornadoDrone demonstrated a high performance in maintaining high-precision landing accuracy on moving platforms, surpassing conventional control methods such as PID controllers with Extended Kalman Filters. The study not only highlights the potential of DRL to tackle complex aerodynamic challenges but also paves the way for advanced autonomous systems that can adapt to environmental changes in real-time. The success of TornadoDrone signifies a leap forward in drone technology, particularly for critical applications such as surveillance and emergency response, where reliability and precision are paramount. △ Less

Submitted 25 June, 2024; v1 submitted 23 June, 2024; originally announced June 2024.

Comments: Submitted to IEEE. arXiv admin note: substantial text overlap with arXiv:2403.06572

MARLander: A Local Path Planning for Drone Swarms using Multiagent Deep Reinforcement Learning

Authors: Demetros Aschu, Robinroy Peter, Sausar Karaf, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Achieving safe and precise landings for a swarm of drones poses a significant challenge, primarily attributed to conventional control and planning methods. This paper presents the implementation of multi-agent deep reinforcement learning (MADRL) techniques for the precise landing of a drone swarm at relocated target locations. The system is trained in a realistic simulated environment with a maxim… ▽ More Achieving safe and precise landings for a swarm of drones poses a significant challenge, primarily attributed to conventional control and planning methods. This paper presents the implementation of multi-agent deep reinforcement learning (MADRL) techniques for the precise landing of a drone swarm at relocated target locations. The system is trained in a realistic simulated environment with a maximum velocity of 3 m/s in training spaces of 4 x 4 x 4 m and deployed utilizing Crazyflie drones with a Vicon indoor localization system. The experimental results revealed that the proposed approach achieved a landing accuracy of 2.26 cm on stationary and 3.93 cm on moving platforms surpassing a baseline method used with a Proportional-integral-derivative (PID) controller with an Artificial Potential Field (APF). This research highlights drone landing technologies that eliminate the need for analytical centralized systems, potentially offering scalability and revolutionizing applications in logistics, safety, and rescue missions. △ Less

Submitted 6 June, 2024; originally announced June 2024.

FlockGPT: Guiding UAV Flocking with Linguistic Orchestration

Authors: Artem Lykov, Sausar Karaf, Mikhail Martynov, Valerii Serpiva, Aleksey Fedoseev, Mikhail Konenkov, Dzmitry Tsetserukou

Abstract: This article presents the world's first rapid drone flocking control using natural language through generative AI. The described approach enables the intuitive orchestration of a flock of any size to achieve the desired geometry. The key feature of the method is the development of a new interface based on Large Language Models to communicate with the user and to generate the target geometry descri… ▽ More This article presents the world's first rapid drone flocking control using natural language through generative AI. The described approach enables the intuitive orchestration of a flock of any size to achieve the desired geometry. The key feature of the method is the development of a new interface based on Large Language Models to communicate with the user and to generate the target geometry descriptions. Users can interactively modify or provide comments during the construction of the flock geometry model. By combining flocking technology and defining the target surface using a signed distance function, smooth and adaptive movement of the drone swarm between target states is achieved. Our user study on FlockGPT confirmed a high level of intuitive control over drone flocking by users. Subjects who had never previously controlled a swarm of drones were able to construct complex figures in just a few iterations and were able to accurately distinguish the formed swarm drone figures. The results revealed a high recognition rate for six different geometric patterns generated through the LLM-based interface and performed by a simulated drone flock (mean of 80% with a maximum of 93\% for cube and tetrahedron patterns). Users commented on low temporal demand (19.2 score in NASA-TLX), high performance (26 score in NASA-TLX), attractiveness (1.94 UEQ score), and hedonic quality (1.81 UEQ score) of the developed system. The FlockGPT demo code repository can be found at: coming soon △ Less

Submitted 9 May, 2024; originally announced May 2024.

FlyNeRF: NeRF-Based Aerial Map** for High-Quality 3D Scene Reconstruction

Authors: Maria Dronova, Vladislav Cheremnykh, Alexey Kotcov, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Current methods for 3D reconstruction and environmental map** frequently face challenges in achieving high precision, highlighting the need for practical and effective solutions. In response to this issue, our study introduces FlyNeRF, a system integrating Neural Radiance Fields (NeRF) with drone-based data acquisition for high-quality 3D reconstruction. Utilizing unmanned aerial vehicle (UAV) f… ▽ More Current methods for 3D reconstruction and environmental map** frequently face challenges in achieving high precision, highlighting the need for practical and effective solutions. In response to this issue, our study introduces FlyNeRF, a system integrating Neural Radiance Fields (NeRF) with drone-based data acquisition for high-quality 3D reconstruction. Utilizing unmanned aerial vehicle (UAV) for capturing images and corresponding spatial coordinates, the obtained data is subsequently used for the initial NeRF-based 3D reconstruction of the environment. Further evaluation of the reconstruction render quality is accomplished by the image evaluation neural network developed within the scope of our system. According to the results of the image evaluation module, an autonomous algorithm determines the position for additional image capture, thereby improving the reconstruction quality. The neural network introduced for render quality assessment demonstrates an accuracy of 97%. Furthermore, our adaptive methodology enhances the overall reconstruction quality, resulting in an average improvement of 2.5 dB in Peak Signal-to-Noise Ratio (PSNR) for the 10% quantile. The FlyNeRF demonstrates promising results, offering advancements in such fields as environmental monitoring, surveillance, and digital twins, where high-fidelity 3D reconstructions are crucial. △ Less

Submitted 19 April, 2024; originally announced April 2024.

MorphoGear: An UAV with Multi-Limb Morphogenetic Gear for Rough-Terrain Locomotion

Authors: Mikhail Martynov, Zhanibek Darush, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Robots able to run, fly, and grasp have a high potential to solve a wide scope of tasks and navigate in complex environments. Several mechatronic designs of such robots with adaptive morphologies are emerging. However, the task of landing on an uneven surface, traversing rough terrain, and manipulating objects still presents high challenges. This paper introduces the design of a novel rotor UAV… ▽ More Robots able to run, fly, and grasp have a high potential to solve a wide scope of tasks and navigate in complex environments. Several mechatronic designs of such robots with adaptive morphologies are emerging. However, the task of landing on an uneven surface, traversing rough terrain, and manipulating objects still presents high challenges. This paper introduces the design of a novel rotor UAV MorphoGear with morphogenetic gear and includes a description of the robot's mechanics, electronics, and control architecture, as well as walking behavior and an analysis of experimental results. MorphoGear is able to fly, walk on surfaces with several gaits, and grasp objects with four compatible robotic limbs. Robotic limbs with three degrees of freedom (DoFs) are used by this UAV as pedipulators when walking or flying and as manipulators when performing actions in the environment. We performed a locomotion analysis of the landing gear of the robot. Three types of robot gaits have been developed. The experimental results revealed low crosstrack error of the most accurate gait (mean of 1.9 cm and max of 5.5 cm) and the ability of the drone to move with a 210 mm step length. Another type of robot gait also showed low crosstrack error (mean of 2.3 cm and max of 6.9 cm). The proposed MorphoGear system can potentially achieve a high scope of tasks in environmental surveying, delivery, and high-altitude operations. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: Published in: 2023 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM)

Lander.AI: Adaptive Landing Behavior Agent for Expertise in 3D Dynamic Platform Landings

Authors: Robinroy Peter, Lavanya Ratnabala, Demetros Aschu, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Mastering autonomous drone landing on dynamic platforms presents formidable challenges due to unpredictable velocities and external disturbances caused by the wind, ground effect, turbines or propellers of the docking platform. This study introduces an advanced Deep Reinforcement Learning (DRL) agent, Lander:AI, designed to navigate and land on platforms in the presence of windy conditions, thereb… ▽ More Mastering autonomous drone landing on dynamic platforms presents formidable challenges due to unpredictable velocities and external disturbances caused by the wind, ground effect, turbines or propellers of the docking platform. This study introduces an advanced Deep Reinforcement Learning (DRL) agent, Lander:AI, designed to navigate and land on platforms in the presence of windy conditions, thereby enhancing drone autonomy and safety. Lander:AI is rigorously trained within the gym-pybullet-drone simulation, an environment that mirrors real-world complexities, including wind turbulence, to ensure the agent's robustness and adaptability. The agent's capabilities were empirically validated with Crazyflie 2.1 drones across various test scenarios, encompassing both simulated environments and real-world conditions. The experimental results showcased Lander:AI's high-precision landing and its ability to adapt to moving platforms, even under wind-induced disturbances. Furthermore, the system performance was benchmarked against a baseline PID controller augmented with an Extended Kalman Filter, illustrating significant improvements in landing precision and error recovery. Lander:AI leverages bio-inspired learning to adapt to external forces like birds, enhancing drone adaptability without knowing force magnitudes.This research not only advances drone landing technologies, essential for inspection and emergency applications, but also highlights the potential of DRL in addressing intricate aerodynamic challenges. △ Less

Submitted 12 March, 2024; v1 submitted 11 March, 2024; originally announced March 2024.

CognitiveOS: Large Multimodal Model based System to Endow Any Type of Robot with Generative AI

Authors: Artem Lykov, Mikhail Konenkov, Koffivi Fidèle Gbagbe, Mikhail Litvinov, Denis Davletshin, Aleksey Fedoseev, Miguel Altamirano Cabrera, Robinroy Peter, Dzmitry Tsetserukou

Abstract: This paper introduces CognitiveOS, the first operating system designed for cognitive robots capable of functioning across diverse robotic platforms. CognitiveOS is structured as a multi-agent system comprising modules built upon a transformer architecture, facilitating communication through an internal monologue format. These modules collectively empower the robot to tackle intricate real-world ta… ▽ More This paper introduces CognitiveOS, the first operating system designed for cognitive robots capable of functioning across diverse robotic platforms. CognitiveOS is structured as a multi-agent system comprising modules built upon a transformer architecture, facilitating communication through an internal monologue format. These modules collectively empower the robot to tackle intricate real-world tasks. The paper delineates the operational principles of the system along with descriptions of its nine distinct modules. The modular design endows the system with distinctive advantages over traditional end-to-end methodologies, notably in terms of adaptability and scalability. The system's modules are configurable, modifiable, or deactivatable depending on the task requirements, while new modules can be seamlessly integrated. This system serves as a foundational resource for researchers and developers in the cognitive robotics domain, alleviating the burden of constructing a cognitive robot system from scratch. Experimental findings demonstrate the system's advanced task comprehension and adaptability across varied tasks, robotic platforms, and module configurations, underscoring its potential for real-world applications. Moreover, in the category of Reasoning it outperformed CognitiveDog (by 15%) and RT2 (by 31%), achieving the highest to date rate of 77%. We provide a code repository and dataset for the replication of CognitiveOS: link will be provided in camera-ready submission. △ Less

Submitted 19 March, 2024; v1 submitted 29 January, 2024; originally announced January 2024.

Comments: The paper is submitted to the IEEE conference

NeuroSwarm: Multi-Agent Neural 3D Scene Reconstruction and Segmentation with UAV for Optimal Navigation of Quadruped Robot

Authors: Iana Zhura, Denis Davletshin, Nipun Dhananjaya Weerakkodi Mudalige, Aleksey Fedoseev, Robinroy Peter, Dzmitry Tsetserukou

Abstract: Quadruped robots have the distinct ability to adapt their body and step height to navigate through cluttered environments. Nonetheless, for these robots to utilize their full potential in real-world scenarios, they require awareness of their environment and obstacle geometry. We propose a novel multi-agent robotic system that incorporates cutting-edge technologies. The proposed solution features a… ▽ More Quadruped robots have the distinct ability to adapt their body and step height to navigate through cluttered environments. Nonetheless, for these robots to utilize their full potential in real-world scenarios, they require awareness of their environment and obstacle geometry. We propose a novel multi-agent robotic system that incorporates cutting-edge technologies. The proposed solution features a 3D neural reconstruction algorithm that enables navigation of a quadruped robot in both static and semi-static environments. The prior areas of the environment are also segmented according to the quadruped robots' abilities to pass them. Moreover, we have developed an adaptive neural field optimal motion planner (ANFOMP) that considers both collision probability and obstacle height in 2D space.Our new navigation and map** approach enables quadruped robots to adjust their height and behavior to navigate under arches and push through obstacles with smaller dimensions. The multi-agent map** operation has proven to be highly accurate, with an obstacle reconstruction precision of 82%. Moreover, the quadruped robot can navigate with 3D obstacle information and the ANFOMP system, resulting in a 33.3% reduction in path length and a 70% reduction in navigation time. △ Less

Submitted 3 August, 2023; originally announced August 2023.

MorphoLander: Reinforcement Learning Based Landing of a Group of Drones on the Adaptive Morphogenetic UAV

Authors: Sausar Karaf, Aleksey Fedoseev, Mikhail Martynov, Zhanibek Darush, Aleksei Shcherbak, Dzmitry Tsetserukou

Abstract: This paper focuses on a novel robotic system MorphoLander representing heterogeneous swarm of drones for exploring rough terrain environments. The morphogenetic leader drone is capable of landing on uneven terrain, traversing it, and maintaining horizontal position to deploy smaller drones for extensive area exploration. After completing their tasks, these drones return and land back on the landin… ▽ More This paper focuses on a novel robotic system MorphoLander representing heterogeneous swarm of drones for exploring rough terrain environments. The morphogenetic leader drone is capable of landing on uneven terrain, traversing it, and maintaining horizontal position to deploy smaller drones for extensive area exploration. After completing their tasks, these drones return and land back on the landing pads of MorphoGear. The reinforcement learning algorithm was developed for a precise landing of drones on the leader robot that either remains static during their mission or relocates to the new position. Several experiments were conducted to evaluate the performance of the developed landing algorithm under both even and uneven terrain conditions. The experiments revealed that the proposed system results in high landing accuracy of 0.5 cm when landing on the leader drone under even terrain conditions and 2.35 cm under uneven terrain conditions. MorphoLander has the potential to significantly enhance the efficiency of the industrial inspections, seismic surveys, and rescue missions in highly cluttered and unstructured environments. △ Less

Submitted 28 July, 2023; v1 submitted 26 July, 2023; originally announced July 2023.

Comments: Accepted paper at the 2023 IEEE Conference on Systems, Man, and Cybernetics

SwarmGear: Heterogeneous Swarm of Drones with Reconfigurable Leader Drone and Virtual Impedance Links for Multi-Robot Inspection

Authors: Zhanibek Darush, Mikhail Martynov, Aleksey Fedoseev, Aleksei Shcherbak, Dzmitry Tsetserukou

Abstract: The continuous monitoring by drone swarms remains a challenging problem due to the lack of power supply and the inability of drones to land on uneven surfaces. Heterogeneous swarms, including ground and aerial vehicles, can support longer inspections and carry a higher number of sensors on board. However, their capabilities are limited by the mobility of wheeled and legged robots in a cluttered en… ▽ More The continuous monitoring by drone swarms remains a challenging problem due to the lack of power supply and the inability of drones to land on uneven surfaces. Heterogeneous swarms, including ground and aerial vehicles, can support longer inspections and carry a higher number of sensors on board. However, their capabilities are limited by the mobility of wheeled and legged robots in a cluttered environment. In this paper, we propose a novel concept for autonomous inspection that we call SwarmGear. SwarmGear utilizes a heterogeneous swarm that investigates the environment in a leader-follower formation. The leader drone is able to land on rough terrain and traverse it by four compliant robotic legs, possessing both the functionalities of an aerial and mobile robot. To preserve the formation of the swarm during its motion, virtual impedance links were developed between the leader and the follower drones. We evaluated experimentally the accuracy of the hybrid leader drone's ground locomotion. By changing the step parameters, the optimal step configuration was found. Two types of gaits were evaluated. The experiments revealed low crosstrack error (mean of 2 cm and max of 4.8 cm) and the ability of the leader drone to move with a 190 mm step length and a 3 degree standard yaw deviation. Four types of drone formations were considered. The best formation was used for experiments with SwarmGear, and it showed low overall crosstrack error for the swarm (mean 7.9 cm for the type 1 gait and 5.1 cm for the type 2 gait). The proposed system can potentially improve the performance of autonomous swarms in cluttered and unstructured environments by allowing all agents of the swarm to switch between aerial and ground formations to overcome various obstacles and perform missions over a large area. △ Less

Submitted 6 April, 2023; originally announced April 2023.

Comments: IEEE International Conference on Unmanned Aircraft System (ICUAS 2023), Warsaw, Poland, June 6-9, 2023, 2023, in print

Effect of local Coulomb interaction on Majorana corner modes: weak and strong correlation limits

Authors: S. V. Aksenov, A. D. Fedoseev, M. S. Shustin, A. O. Zlotnikov

Abstract: Here we present an analysis of the evolution of Majorana corner modes realizing in a higher-order topological superconductor (HOTSC) on a square lattice under the influence of local Coulomb repulsion. The HOTSC spectral properties were considered in two regimes: when the intensities of many-body interactions are either weak or strong. The weak regime was studied using the mean-field approximation… ▽ More Here we present an analysis of the evolution of Majorana corner modes realizing in a higher-order topological superconductor (HOTSC) on a square lattice under the influence of local Coulomb repulsion. The HOTSC spectral properties were considered in two regimes: when the intensities of many-body interactions are either weak or strong. The weak regime was studied using the mean-field approximation with self-consistent solutions carried out both in the uniform case and taking into account of the boundary of the finite square-shaped system. It is shown that in the uniform case the topologically nontrivial phase on the phase diagram is widened by the Coulomb repulsion. The boundary effect, resulting in an inhomogeneous spatial distribution of the correlators, leads to the appearance of the crossover from the symmetric spin-independent solution to the spin-dependent one characterized by a spontaneously broken symmetry. In the former the corner states have energies that are determined by the overlap of the excitation wave functions localized at the different corners. In the latter the corner excitation energy is defined by the Coulomb repulsion intensity with a quadratic law. The crossover is a finite size effect, i.e. the larger the system the lesser the critical value of the Coulomb repulsion. In the strong repulsion regime we derive the effective HOTSC Hamiltonian in the atomic representation and found a rich variety of interactions induced by virtual processes between the lower and upper Hubbard subbands. It is shown that Majorana corner modes still can be realized in the limit of the infinite repulsion. Although the boundaries of the topologically nontrivial phase are strongly renormalized by Hubbard corrections. △ Less

Submitted 6 December, 2022; originally announced December 2022.

Comments: 13 pages, 6 figures

On certain properties of pseudo-Riemannian Bertrand manifolds

Authors: D. A. Fedoseev

Abstract: In the present article we prove and discuss several properties of pseudo-Riemannian Bertrand manifolds, and give an overview of the state of the theory together with problems for future work. In particular, we prove that there are no pseudo-Riemannian completely Bertrand systems -- dynamical systems of movement in a central field on a pseudo-Riemannian 2-dimensional manifold of revolution such tha… ▽ More In the present article we prove and discuss several properties of pseudo-Riemannian Bertrand manifolds, and give an overview of the state of the theory together with problems for future work. In particular, we prove that there are no pseudo-Riemannian completely Bertrand systems -- dynamical systems of movement in a central field on a pseudo-Riemannian 2-dimensional manifold of revolution such that all trajectories of movement are closed. △ Less

Submitted 4 December, 2022; originally announced December 2022.

Comments: 8 pages

DeltaFinger: a 3-DoF Wearable Haptic Display Enabling High-Fidelity Force Vector Presentation at a User Finger

Authors: Artem Lykov, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: This paper presents a novel haptic device DeltaFinger designed to deliver the force of interaction with virtual objects by guiding user's finger with wearable delta mechanism. The developed interface is capable to deliver 3D force vector to the fingertip of the index finger of the user, allowing complex rendering of virtual reality (VR) environment. The developed device is able to produce the kine… ▽ More This paper presents a novel haptic device DeltaFinger designed to deliver the force of interaction with virtual objects by guiding user's finger with wearable delta mechanism. The developed interface is capable to deliver 3D force vector to the fingertip of the index finger of the user, allowing complex rendering of virtual reality (VR) environment. The developed device is able to produce the kinesthetic feedback up to 1.8 N in vertical projection and 0.9 N in horizontal projection without restricting the motion freedom of of the remaining fingers. The experimental results showed a sufficient precision in perception of force vector with DeltaFinger (mean force vector error of 0.6 rad). The proposed device potentially can be applied to VR communications, medicine, and navigation of the people with vision problems. △ Less

Submitted 1 November, 2022; originally announced November 2022.

Comments: 13 pages, 8 figures, accepted version to AsiaHaptics 2022

DroneARchery: Human-Drone Interaction through Augmented Reality with Haptic Feedback and Multi-UAV Collision Avoidance Driven by Deep Reinforcement Learning

Authors: Ekaterina Dorzhieva, Ahmed Baza, Ayush Gupta, Aleksey Fedoseev, Miguel Altamirano Cabrera, Ekaterina Karmanova, Dzmitry Tsetserukou

Abstract: We propose a novel concept of augmented reality (AR) human-drone interaction driven by RL-based swarm behavior to achieve intuitive and immersive control of a swarm formation of unmanned aerial vehicles. The DroneARchery system developed by us allows the user to quickly deploy a swarm of drones, generating flight paths simulating archery. The haptic interface LinkGlide delivers a tactile stimulus… ▽ More We propose a novel concept of augmented reality (AR) human-drone interaction driven by RL-based swarm behavior to achieve intuitive and immersive control of a swarm formation of unmanned aerial vehicles. The DroneARchery system developed by us allows the user to quickly deploy a swarm of drones, generating flight paths simulating archery. The haptic interface LinkGlide delivers a tactile stimulus of the bowstring tension to the forearm to increase the precision of aiming. The swarm of released drones dynamically avoids collisions between each other, the drone following the user, and external obstacles with behavior control based on deep reinforcement learning. The developed concept was tested in the scenario with a human, where the user shoots from a virtual bow with a real drone to hit the target. The human operator observes the ballistic trajectory of the drone in an AR and achieves a realistic and highly recognizable experience of the bowstring tension through the haptic display. The experimental results revealed that the system improves trajectory prediction accuracy by 63.3% through applying AR technology and conveying haptic feedback of pulling force. DroneARchery users highlighted the naturalness (4.3 out of 5 point Likert scale) and increased confidence (4.7 out of 5) when controlling the drone. We have designed the tactile patterns to present four sliding distances (tension) and three applied force levels (stiffness) of the haptic display. Users demonstrated the ability to distinguish tactile patterns produced by the haptic display representing varying bowstring tension(average recognition rate is of 72.8%) and stiffness (average recognition rate is of 94.2%). The novelty of the research is the development of an AR-based approach for drone control that does not require special skills and training from the operator. △ Less

Submitted 14 October, 2022; originally announced October 2022.

Comments: Accepted to the IEEE Int. Symp. on Mixed and Augmented Reality (ISMAR 2022). Copyright 20XX IEEE. Personal use of this material is permitted

SwarMan: Anthropomorphic Swarm of Drones Avatar with Body Tracking and Deep Learning-Based Gesture Recognition

Authors: Ahmed Baza, Ayush Gupta, Ekaterina Dorzhieva, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Anthropomorphic robot avatars present a conceptually novel approach to remote affective communication, allowing people across the world a wider specter of emotional and social exchanges over traditional 2D and 3D image data. However, there are several limitations of current telepresence robots, such as the high weight, complexity of the system that prevents its fast deployment, and the limited wor… ▽ More Anthropomorphic robot avatars present a conceptually novel approach to remote affective communication, allowing people across the world a wider specter of emotional and social exchanges over traditional 2D and 3D image data. However, there are several limitations of current telepresence robots, such as the high weight, complexity of the system that prevents its fast deployment, and the limited workspace of the avatars mounted on either static or wheeled mobile platforms. In this paper, we present a novel concept of telecommunication through a robot avatar based on an anthropomorphic swarm of drones; SwarMan. The developed system consists of nine nanocopters controlled remotely by the operator through a gesture recognition interface. SwarMan allows operators to communicate by directly following their motions and by recognizing one of the prerecorded emotional patterns, thus rendering the captured emotion as illumination on the drones. The LSTM MediaPipe network was trained on a collected dataset of 600 short videos with five emotional gestures. The accuracy of achieved emotion recognition was 97% on the test dataset. As communication through the swarm avatar significantly changes the visual appearance of the operator, we investigated the ability of the users to recognize and respond to emotions performed by the swarm of drones. The experimental results revealed a high consistency between the users in rating emotions. Additionally, users indicated low physical demand (2.25 on the Likert scale) and were satisfied with their performance (1.38 on the Likert scale) when communicating by the SwarMan interface. △ Less

Submitted 4 October, 2022; originally announced October 2022.

Comments: 6 pages, 8 figures, IEEE SMC 2022 conference

DandelionTouch: High Fidelity Haptic Rendering of Soft Objects in VR by a Swarm of Drones

Authors: Aleksey Fedoseev, Ahmed Baza, Ayush Gupta, Ekaterina Dorzhieva, Riya Neelesh Gujarathi, Dzmitry Tsetserukou

Abstract: To achieve high fidelity haptic rendering of soft objects in a high mobility virtual environment, we propose a novel haptic display DandelionTouch. The tactile actuators are delivered to the fingertips of the user by a swarm of drones. Users of DandelionTouch are capable of experiencing tactile feedback in a large space that is not limited by the device's working area. Importantly, they will not e… ▽ More To achieve high fidelity haptic rendering of soft objects in a high mobility virtual environment, we propose a novel haptic display DandelionTouch. The tactile actuators are delivered to the fingertips of the user by a swarm of drones. Users of DandelionTouch are capable of experiencing tactile feedback in a large space that is not limited by the device's working area. Importantly, they will not experience muscle fatigue during long interactions with virtual objects. Hand tracking and swarm control algorithm allow guiding the swarm with hand motions and avoid collisions inside the formation. Several topologies of the impedance connection between swarm units were investigated in this research. The experiment, in which drones performed a point following task on a square trajectory in real-time, revealed that drones connected in a Star topology performed the trajectory with low mean positional error (RMSE decreased by 20.6% in comparison with other impedance topologies and by 40.9% in comparison with potential field-based swarm control). The achieved velocities of the drones in all formations with impedance behavior were 28% higher than for the swarm controlled with the potential field algorithm. Additionally, the perception of several vibrotactile patterns was evaluated in a user study with 7 participants. The study has shown that the proposed combination of temporal delay and frequency modulation allows users to successfully recognize the surface property and motion direction in VR simultaneously (mean recognition rate of 70%, maximum of 93%). DandelionTouch suggests a new type of haptic feedback in VR systems where no hand-held or wearable interface is required. △ Less

Submitted 22 September, 2022; v1 submitted 21 September, 2022; originally announced September 2022.

Comments: Accepted to the 2022 IEEE International Conference on Systems, Man, and Cybernetics (SMC). Copyright 20XX IEEE. Personal use of this material is permitted

HyperGuider: Virtual Reality Framework for Interactive Path Planning of Quadruped Robot in Cluttered and Multi-Terrain Environments

Authors: Ildar Babataev, Aleksey Fedoseev, Nipun Weerakkodi, Elena Nazarova, Dzmitry Tsetserukou

Abstract: Quadruped platforms have become an active topic of research due to their high mobility and traversability in rough terrain. However, it is highly challenging to determine whether the clattered environment could be passed by the robot and how exactly its path should be calculated. Moreover, the calculated path may pass through areas with dynamic objects or environments that are dangerous for the ro… ▽ More Quadruped platforms have become an active topic of research due to their high mobility and traversability in rough terrain. However, it is highly challenging to determine whether the clattered environment could be passed by the robot and how exactly its path should be calculated. Moreover, the calculated path may pass through areas with dynamic objects or environments that are dangerous for the robot or people around. Therefore, we propose a novel conceptual approach of teaching quadruped robots navigation through user-guided path planning in virtual reality (VR). Our system contains both global and local path planners, allowing robot to generate path through iterations of learning. The VR interface allows user to interact with environment and to assist quadruped robot in challenging scenarios. The results of comparison experiments show that cooperation between human and path planning algorithms can increase the computational speed of the algorithm by 35.58% in average, and non-critically increasing of the path length (average of 6.66%) in test scenario. Additionally, users described VR interface as not requiring physical demand (2.3 out of 10) and highly evaluated their performance (7.1 out of 10). The ability to find a less optimal but safer path remains in demand for the task of navigating in a cluttered and unstructured environment. △ Less

Submitted 20 September, 2022; originally announced September 2022.

Comments: 6 pages, 9 figures, IEEE SMC 2022 conference

HyperPalm: DNN-based hand gesture recognition interface for intelligent communication with quadruped robot in 3D space

Authors: Elena Nazarova, Ildar Babataev, Nipun Weerakkodi, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Nowadays, autonomous mobile robots support people in many areas where human presence either redundant or too dangerous. They have successfully proven themselves in expeditions, gas industry, mines, warehouses, etc. However, even legged robots may stuck in rough terrain conditions requiring human cognitive abilities to navigate the system. While gamepads and keyboards are convenient for wheeled rob… ▽ More Nowadays, autonomous mobile robots support people in many areas where human presence either redundant or too dangerous. They have successfully proven themselves in expeditions, gas industry, mines, warehouses, etc. However, even legged robots may stuck in rough terrain conditions requiring human cognitive abilities to navigate the system. While gamepads and keyboards are convenient for wheeled robot control, the quadruped robot in 3D space can move along all linear coordinates and Euler angles, requiring at least 12 buttons for independent control of their DoF. Therefore, more convenient interfaces of control are required. In this paper we present HyperPalm: a novel gesture interface for intuitive human-robot interaction with quadruped robots. Without additional devices, the operator has full position and orientation control of the quadruped robot in 3D space through hand gesture recognition with only 5 gestures and 6 DoF hand motion. The experimental results revealed to classify 5 static gestures with high accuracy (96.5%), accurately predict the position of the 6D position of the hand in three-dimensional space. The absolute linear deviation Root mean square deviation (RMSD) of the proposed approach is 11.7 mm, which is almost 50% lower than for the second tested approach, the absolute angular deviation RMSD of the proposed approach is 2.6 degrees, which is almost 27% lower than for the second tested approach. Moreover, the user study was conducted to explore user's subjective experience from human-robot interaction through the proposed gesture interface. The participants evaluated their interaction with HyperPalm as intuitive (2.0), not causing frustration (2.63), and requiring low physical demand (2.0). △ Less

Submitted 20 September, 2022; originally announced September 2022.

Comments: 6 pages, 9 figures, IEEE SMC 2022

HyperDog: An Open-Source Quadruped Robot Platform Based on ROS2 and micro-ROS

Authors: Nipun Dhananjaya Weerakkodi Mudalige, Iana Zhura, Ildar Babataev, Elena Nazarova, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Nowadays, design and development of legged quadruped robots is a quite active area of scientific research. In fact, the legged robots have become popular due to their capabilities to adapt to harsh terrains and diverse environmental conditions in comparison to other mobile robots. With the higher demand for legged robot experiments, more researches and engineers need an affordable and quick way of… ▽ More Nowadays, design and development of legged quadruped robots is a quite active area of scientific research. In fact, the legged robots have become popular due to their capabilities to adapt to harsh terrains and diverse environmental conditions in comparison to other mobile robots. With the higher demand for legged robot experiments, more researches and engineers need an affordable and quick way of locomotion algorithm development. In this paper, we present a new open source quadruped robot HyperDog platform, which features 12 RC servo motors, onboard NVIDIA Jetson nano computer and STM32F4 Discovery board. HyperDog is an open-source platform for quadruped robotic software development, which is based on Robot Operating System 2 (ROS2) and micro-ROS. Moreover, the HyperDog is a quadrupedal robotic dog entirely built from 3D printed parts and carbon fiber, which allows the robot to have light weight and good strength. The idea of this work is to demonstrate an affordable and customizable way of robot development and provide researches and engineers with the legged robot platform, where different algorithms can be tested and validated in simulation and real environment. The developed project with code is available on GitHub (https://github.com/NDHANA94/hyperdog_ros2). △ Less

Submitted 19 September, 2022; originally announced September 2022.

Comments: 6 pages, 13 figures, IEEE SMC 2022 conference

Exploring the Role of Electro-Tactile and Kinesthetic Feedback in Telemanipulation Task

Authors: Daria Trinitatova, Miguel Altamirano Cabrera, Polina Ponomareva, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Teleoperation of robotic systems for precise and delicate object gras** requires high-fidelity haptic feedback to obtain comprehensive real-time information about the grasp. In such cases, the most common approach is to use kinesthetic feedback. However, a single contact point information is insufficient to detect the dynamically changing shape of soft objects. This paper proposes a novel telema… ▽ More Teleoperation of robotic systems for precise and delicate object gras** requires high-fidelity haptic feedback to obtain comprehensive real-time information about the grasp. In such cases, the most common approach is to use kinesthetic feedback. However, a single contact point information is insufficient to detect the dynamically changing shape of soft objects. This paper proposes a novel telemanipulation system that provides kinesthetic and cutaneous stimuli to the user's hand to achieve accurate liquid dispensing by dexterously manipulating the deformable object (i.e., pipette). The experimental results revealed that the proposed approach to provide the user with multimodal haptic feedback considerably improves the quality of dosing with a remote pipette. Compared with pure visual feedback, the relative dosing error decreased by 66\% and task execution time decreased by 18\% when users manipulated the deformable pipette with a multimodal haptic interface in combination with visual feedback. The proposed technology can be potentially implemented in delicate dosing procedures during the antibody tests for COVID-19, chemical experiments, operation with organic materials, and telesurgery. △ Less

Submitted 30 August, 2022; originally announced August 2022.

Comments: Accepted paper in IEEE CASE (International Conference on Automation Science and Engineering) 2022, IEEE copyrigh

SwarmHawk: Self-Sustaining Multi-Agent System for Landing on a Moving Platform through an Agent Supervision

Authors: Ayush Gupta, Ekaterina Dorzhieva, Ahmed Baza, Mert Alper, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Heterogeneous teams of mobile robots and UAVs are offering a substantial benefit in an autonomous exploration of the environment. Nevertheless, although joint exploration scenarios for such systems are widely discussed, they are still suffering from low adaptability to changes in external conditions and faults of swarm agents during the UAV docking. We propose a novel vision-based drone swarm dock… ▽ More Heterogeneous teams of mobile robots and UAVs are offering a substantial benefit in an autonomous exploration of the environment. Nevertheless, although joint exploration scenarios for such systems are widely discussed, they are still suffering from low adaptability to changes in external conditions and faults of swarm agents during the UAV docking. We propose a novel vision-based drone swarm docking system for robust landing on a moving platform when one of the agents lost its position signal. The proposed SwarmHawk system relies on vision-based detection for the mobile platform tracking and navigation of its agents. Each drone of the swarm carries an RGB camera and AprilTag3 QR-code marker on board. SwarmHawk can switch between two modes of operation, acting as a homogeneous swarm in case of global UAV localization or assigning leader drones to navigate its neighbors in case of a camera fault in one of the drones or global localization failure. Two experiments were performed to evaluate SwarmHawk's performance under the global and local localization with static and moving platforms. The experimental results revealed a sufficient accuracy in the swarm landing task on a static mobile platform (error of 4.2 cm in homogeneous formation and 1.9 cm in leader-follower formation) and on moving platform (error of 6.9 cm in homogeneous formation and 4.7 cm in leader-follower formation). Moreover, the drones showed a good landing on a platform moving along a complex trajectory (average error of 19.4 cm) in leader-follower formation. The proposed SwarmHawk technology can be potentially applied in various swarm scenarios, including complex environment exploration, inspection, and drone delivery. △ Less

Submitted 17 June, 2022; originally announced June 2022.

Comments: Accepted paper at IEEE International Conference on Unmanned Aircraft System (ICUAS 2022), IEEE copyright

SwarmHive: Heterogeneous Swarm of Drones for Robust Autonomous Landing on Moving Robot

Authors: Ayush Gupta, Ahmed Baza, Ekaterina Dorzhieva, Mert Alper, Mariia Makarova, Stepan Perminov, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: The paper focuses on a heterogeneous swarm of drones to achieve a dynamic landing of formation on a moving robot. This challenging task was not yet achieved by scientists. The key technology is that instead of facilitating each agent of the swarm of drones with computer vision that considerably increases the payload and shortens the flight time, we propose to install only one camera on the leader… ▽ More The paper focuses on a heterogeneous swarm of drones to achieve a dynamic landing of formation on a moving robot. This challenging task was not yet achieved by scientists. The key technology is that instead of facilitating each agent of the swarm of drones with computer vision that considerably increases the payload and shortens the flight time, we propose to install only one camera on the leader drone. The follower drones receive the commands from the leader UAV and maintain a collision-free trajectory with the artificial potential field. The experimental results revealed a high accuracy of the swarm landing on a static mobile platform (RMSE of 4.48 cm). RMSE of swarm landing on the mobile platform moving with the maximum velocities of 1.0 m/s and 1.5 m/s equals 8.76 cm and 8.98 cm, respectively. The proposed SwarmHive technology will allow the time-saving landing of the swarm for further drone recharging. This will make it possible to achieve self-sustainable operation of a multi-agent robotic system for such scenarios as rescue operations, inspection and maintenance, autonomous warehouse inventory, cargo delivery, and etc. △ Less

Submitted 17 June, 2022; originally announced June 2022.

Comments: Accepted paper at IEEE Vehicular Technology Conference 2022 (IEEE VTC 2022), IEEE copyright

DogTouch: CNN-based Recognition of Surface Textures by Quadruped Robot with High Density Tactile Sensors

Authors: Nipun Dhananjaya Weerakkodi Mudalige, Elena Nazarova, Ildar Babataev, Pavel Kopanev, Aleksey Fedoseev, Miguel Altamirano Cabrera, Dzmitry Tsetserukou

Abstract: The ability to perform locomotion in various terrains is critical for legged robots. However, the robot has to have a better understanding of the surface it is walking on to perform robust locomotion on different terrains. Animals and humans are able to recognize the surface with the help of the tactile sensation on their feet. Although, the foot tactile sensation for legged robots has not been mu… ▽ More The ability to perform locomotion in various terrains is critical for legged robots. However, the robot has to have a better understanding of the surface it is walking on to perform robust locomotion on different terrains. Animals and humans are able to recognize the surface with the help of the tactile sensation on their feet. Although, the foot tactile sensation for legged robots has not been much explored. This paper presents research on a novel quadruped robot DogTouch with tactile sensing feet (TSF). TSF allows the recognition of different surface textures utilizing a tactile sensor and a convolutional neural network (CNN). The experimental results show a sufficient validation accuracy of 74.37\% for our trained CNN-based model, with the highest recognition for line patterns of 90\%. In the future, we plan to improve the prediction model by presenting surface samples with the various depths of patterns and applying advanced Deep Learning and Shallow learning models for surface recognition. Additionally, we propose a novel approach to navigation of quadruped and legged robots. We can arrange the tactile paving textured surface (similar that used for blind or visually impaired people). Thus, DogTouch will be capable of locomotion in unknown environment by just recognizing the specific tactile patterns which will indicate the straight path, left or right turn, pedestrian crossing, road, and etc. That will allow robust navigation regardless of lighting condition. Future quadruped robots equipped with visual and tactile perception system will be able to safely and intelligently navigate and interact in the unstructured indoor and outdoor environment. △ Less

Submitted 9 June, 2022; originally announced June 2022.

Comments: Accepted paper at IEEE Vehicular Technology Conference 2022 (IEEE VTC 2022), IEEE copyright

Topological superconductivity and Majorana states in low-dimensional systems

Authors: V. V. Val'kov, M. S. Shustin, S. V. Aksenov, A. O. Zlotnikov, A. D. Fedoseev, V. A. Mitskan, M. Yu. Kagan

Abstract: We discuss the properties of topologically nontrivial superconducting phases and the conditions for their realization in condensed matter, and the principles for identifying Majorana bound states (MBSs). Along with the well-known Kitaev chain and superconducting nanowire (SW) models with spin-orbit coupling in an external magnetic field, we discuss models of quasi-2D materials in which MBSs are re… ▽ More We discuss the properties of topologically nontrivial superconducting phases and the conditions for their realization in condensed matter, and the principles for identifying Majorana bound states (MBSs). Along with the well-known Kitaev chain and superconducting nanowire (SW) models with spin-orbit coupling in an external magnetic field, we discuss models of quasi-2D materials in which MBSs are realized in the presence of noncollinear spin ordering. For finite-length SWs, we demonstrate a cascade of quantum transitions occurring with a change in the magnetic field, accompanied by a change in the fermion parity of the ground state. The corresponding anomalous behavior of the magnetocaloric effect can be used as a tool for identifying MBSs. We devote considerable attention to the analysis of the transport characteristics of devices that contain topologically nontrivial materials. The results of studying the conductance of an Aharonov-Bohm ring whose arms are connected by an SW are discussed in detail. An important feature of this device is the appearance of Fano resonances in the dependence of conductance on the magnetic field when the SW is in a topologically nontrivial phase. We establish a relation between the characteristics of such resonances and the spatial structure of the lowest-energy SW state. The conditions for the occurrence of an MBS in the phase of the coexistence of chiral $d+id$ superconductivity and 120-degree spin ordering are determined in the framework of the $t-J-V$ model on a triangular lattice. We take electron-electron interactions into account in discussing the topological invariants of low-dimensional superconducting materials with noncollinear spin ordering. The formation of Majorana modes in regions with an odd value of a topological $\mathbb{Z}$ invariant is demonstrated. The spatial structure of these excitations in the Hubbard fermion ensemble is determined. △ Less

Submitted 20 May, 2022; originally announced May 2022.

Comments: 114 pages, 31 figures

Journal ref: Physics Uspekhi 65, 2 (2022)

Multiplication of quandle structures

Authors: Valeriy G. Bardakov, Denis A. Fedoseev

Abstract: We generalise the construction of $Q$-family of quandles and $G$-family of quandles which were introduced in the paper of A. Ishii, M. Iwakiri, Y. Jang, K. Oshiro, and find connection with other constructions of quandles. We define a composition of quandl's structures, which are defined on the same set and find conditions under which this composition gives a quandle. Further we prove that under th… ▽ More We generalise the construction of $Q$-family of quandles and $G$-family of quandles which were introduced in the paper of A. Ishii, M. Iwakiri, Y. Jang, K. Oshiro, and find connection with other constructions of quandles. We define a composition of quandl's structures, which are defined on the same set and find conditions under which this composition gives a quandle. Further we prove that under this multiplication we get a group and show that this group is abelian. △ Less

Submitted 26 April, 2022; originally announced April 2022.

GraspLook: a VR-based Telemanipulation System with R-CNN-driven Augmentation of Virtual Environment

Authors: Polina Ponomareva, Daria Trinitatova, Aleksey Fedoseev, Ivan Kalinov, Dzmitry Tsetserukou

Abstract: The teleoperation of robotic systems in medical applications requires stable and convenient visual feedback for the operator. The most accessible approach to delivering visual information from the remote area is using cameras to transmit a video stream from the environment. However, such systems are sensitive to the camera resolution, limited viewpoints, and cluttered environment bringing addition… ▽ More The teleoperation of robotic systems in medical applications requires stable and convenient visual feedback for the operator. The most accessible approach to delivering visual information from the remote area is using cameras to transmit a video stream from the environment. However, such systems are sensitive to the camera resolution, limited viewpoints, and cluttered environment bringing additional mental demands to the human operator. The paper proposes a novel system of teleoperation based on an augmented virtual environment (VE). The region-based convolutional neural network (R-CNN) is applied to detect the laboratory instrument and estimate its position in the remote environment to display further its digital twin in the VE, which is necessary for dexterous telemanipulation. The experimental results revealed that the developed system allows users to operate the robot smoother, which leads to a decrease in task execution time when manipulating test tubes. In addition, the participants evaluated the developed system as less mentally demanding (by 11%) and requiring less effort (by 16%) to accomplish the task than the camera-based teleoperation approach and highly assessed their performance in the augmented VE. The proposed technology can be potentially applied for conducting laboratory tests in remote areas when operating with infectious and poisonous reagents. △ Less

Submitted 24 October, 2021; originally announced October 2021.

Comments: Accepted to IEEE 20th International Conference on Advanced Robotics (ICAR) 2021, 6 pages, 8 figures

DroneStick: Flying Joystick as a Novel Type of Interface

Authors: Evgeny Tsykunov, Aleksey Fedoseev, Ekaterina Dorzhieva, Ruslan Agishev, Roman Ibrahimov, Derek Vasquez, Luiza Labazanova, Dzmitry Tsetserukou

Abstract: DroneStick is a novel hands-free method for smooth interaction between a human and a robotic system via one of its agents, without training and any additional handheld or wearable device or infrastructure. A flying joystick (DroneStick), being a part of a multi-robot system, is composed of a flying drone and coiled wire with a vibration motor. By pulling on the coiled wire, the operator commands c… ▽ More DroneStick is a novel hands-free method for smooth interaction between a human and a robotic system via one of its agents, without training and any additional handheld or wearable device or infrastructure. A flying joystick (DroneStick), being a part of a multi-robot system, is composed of a flying drone and coiled wire with a vibration motor. By pulling on the coiled wire, the operator commands certain motions of the follower robotic system. The DroneStick system does not require the user to carry any equipment before or after performing the required interaction. DroneStick provides useful feedback to the operator in the form of force transferred through the wire, translation/rotation of the flying joystick, and motor vibrations at the fingertips. Feedback allows users to interact with different forms of robotic systems intuitively. A potential application can enhance an automated `last mile' delivery when a recipient needs to guide a delivery drone/robot gently to a spot where a parcel has to be dropped. △ Less

Submitted 18 October, 2021; originally announced October 2021.

Comments: 2 pages, 1 figure, to be published in ACM SIGGRAPH Asia 2021 Emerging Technologies

Aspects of topological superconductivity in 2D systems: noncollinear magnetism, skyrmions, and higher-order topology

Authors: A. O. Zlotnikov, M. S. Shustin, A. D. Fedoseev

Abstract: The review is aimed at highlighting the aspects of topological superconductivity in the absence of spin-orbit interaction in two-dimensional systems with long-range non-collinear spin ordering or magnetic skyrmions. Another purpose is to give a brief introduction to the new concept of topological superconductivity, i.e. higher-order topology in two-dimensional systems including spin-orbit coupled… ▽ More The review is aimed at highlighting the aspects of topological superconductivity in the absence of spin-orbit interaction in two-dimensional systems with long-range non-collinear spin ordering or magnetic skyrmions. Another purpose is to give a brief introduction to the new concept of topological superconductivity, i.e. higher-order topology in two-dimensional systems including spin-orbit coupled structures. The formation of Majorana modes due to magnetic textures is discussed. The role of effective triplet pairings and odd fermion parity of the ground state wave function in different systems is emphasized. We describe the peculiarities of the magnetic skyrmions, leading to the formation of the Majorana modes and defects on which the modes are localized. The problem of braiding in the two-dimensional systems, especially in higher-order topological superconductors, is considered. △ Less

Submitted 20 October, 2021; v1 submitted 7 September, 2021; originally announced September 2021.

Comments: 37 pages, 22 figures, review

Journal ref: Journal of Superconductivity and Novel Magnetism, (2021)

SwarmPlay: Interactive Tic-tac-toe Board Game with Swarm of Nano-UAVs driven by Reinforcement Learning

Authors: Ekaterina Karmanova, Valerii Serpiva, Stepan Perminov, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: Reinforcement learning (RL) methods have been actively applied in the field of robotics, allowing the system itself to find a solution for a task otherwise requiring a complex decision-making algorithm. In this paper, we present a novel RL-based Tic-tac-toe scenario, i.e. SwarmPlay, where each playing component is presented by an individual drone that has its own mobility and swarm intelligence to… ▽ More Reinforcement learning (RL) methods have been actively applied in the field of robotics, allowing the system itself to find a solution for a task otherwise requiring a complex decision-making algorithm. In this paper, we present a novel RL-based Tic-tac-toe scenario, i.e. SwarmPlay, where each playing component is presented by an individual drone that has its own mobility and swarm intelligence to win against a human player. Thus, the combination of challenging swarm strategy and human-drone collaboration aims to make the games with machines tangible and interactive. Although some research on AI for board games already exists, e.g., chess, the SwarmPlay technology has the potential to offer much more engagement and interaction with the user as it proposes a multi-agent swarm instead of a single interactive robot. We explore user's evaluation of RL-based swarm behavior in comparison with the game theory-based behavior. The preliminary user study revealed that participants were highly engaged in the game with drones (70% put a maximum score on the Likert scale) and found it less artificial compared to the regular computer-based systems (80%). The affection of the user's game perception from its outcome was analyzed and put under discussion. User study revealed that SwarmPlay has the potential to be implemented in a wider range of games, significantly improving human-drone interactivity. △ Less

Submitted 3 August, 2021; originally announced August 2021.

Comments: Accepted to the 30th IEEE International Conference on Robot and Human Interactive Communication (RO-MAN). 2021. IEEE copyright. arXiv admin note: substantial text overlap with arXiv:2108.00488

SwarmPlay: A Swarm of Nano-Quadcopters Playing Tic-tac-toe Board Game against a Human

Authors: Ekaterina Karmanova, Valerii Serpiva, Stepan Perminov, Roman Ibrahimov, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: We present a new paradigm of games, i.e. SwarmPlay, where each playing component is presented by an individual drone that has its own mobility and swarm intelligence to win against a human player. The motivation behind the research is to make the games with machines tangible and interactive. Although some research on the robotic players for board games already exists, e.g., chess, the SwarmPlay te… ▽ More We present a new paradigm of games, i.e. SwarmPlay, where each playing component is presented by an individual drone that has its own mobility and swarm intelligence to win against a human player. The motivation behind the research is to make the games with machines tangible and interactive. Although some research on the robotic players for board games already exists, e.g., chess, the SwarmPlay technology has the potential to offer much more engagement and interaction with a human as it proposes a multi-agent swarm instead of a single interactive robot. The proposed system consists of a robotic swarm, a workstation, a computer vision (CV), and Game Theory-based algorithms. A novel game algorithm was developed to provide a natural game experience to the user. The preliminary user study revealed that participants were highly engaged in the game with drones (69% put a maximum score on the Likert scale) and found it less artificial compared to the regular computer-based systems (77% put maximum score). The affection of the user's game perception from its outcome was analyzed and put under discussion. User study revealed that SwarmPlay has the potential to be implemented in a wider range of games, significantly improving human-drone interactivity. △ Less

Submitted 1 August, 2021; originally announced August 2021.

Comments: ACM SIGGRAPH21. Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored

DronePaint: Swarm Light Painting with DNN-based Gesture Recognition

Authors: Valerii Serpiva, Ekaterina Karmanova, Aleksey Fedoseev, Stepan Perminov, Dzmitry Tsetserukou

Abstract: We propose a novel human-swarm interaction system, allowing the user to directly control a swarm of drones in a complex environment through trajectory drawing with a hand gesture interface based on the DNN-based gesture recognition. The developed CV-based system allows the user to control the swarm behavior without additional devices through human gestures and motions in real-time, providing conve… ▽ More We propose a novel human-swarm interaction system, allowing the user to directly control a swarm of drones in a complex environment through trajectory drawing with a hand gesture interface based on the DNN-based gesture recognition. The developed CV-based system allows the user to control the swarm behavior without additional devices through human gestures and motions in real-time, providing convenient tools to change the swarm's shape and formation. The two types of interaction were proposed and implemented to adjust the swarm hierarchy: trajectory drawing and free-form trajectory generation control. The experimental results revealed a high accuracy of the gesture recognition system (99.75%), allowing the user to achieve relatively high precision of the trajectory drawing (mean error of 5.6 cm in comparison to 3.1 cm by mouse drawing) over the three evaluated trajectory patterns. The proposed system can be potentially applied in complex environment exploration, spray painting using drones, and interactive drone shows, allowing users to create their own art objects by drone swarms. △ Less

Submitted 23 July, 2021; originally announced July 2021.

Comments: ACM SIGGRAPH 21. Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. arXiv admin note: substantial text overlap with arXiv:2106.14698

SwarmPaint: Human-Swarm Interaction for Trajectory Generation and Formation Control by DNN-based Gesture Interface

Authors: Valerii Serpiva, Ekaterina Karmanova, Aleksey Fedoseev, Stepan Perminov, Dzmitry Tsetserukou

Abstract: Teleoperation tasks with multi-agent systems have a high potential in supporting human-swarm collaborative teams in exploration and rescue operations. However, it requires an intuitive and adaptive control approach to ensure swarm stability in a cluttered and dynamically shifting environment. We propose a novel human-swarm interaction system, allowing the user to control swarm position and formati… ▽ More Teleoperation tasks with multi-agent systems have a high potential in supporting human-swarm collaborative teams in exploration and rescue operations. However, it requires an intuitive and adaptive control approach to ensure swarm stability in a cluttered and dynamically shifting environment. We propose a novel human-swarm interaction system, allowing the user to control swarm position and formation by either direct hand motion or by trajectory drawing with a hand gesture interface based on the DNN gesture recognition. The key technology of the SwarmPaint is the user's ability to perform various tasks with the swarm without additional devices by switching between interaction modes. Two types of interaction were proposed and developed to adjust a swarm behavior: free-form trajectory generation control and shaped formation control. Two preliminary user studies were conducted to explore user's performance and subjective experience from human-swarm interaction through the developed control modes. The experimental results revealed a sufficient accuracy in the trajectory tracing task (mean error of 5.6 cm by gesture draw and 3.1 cm by mouse draw with the pattern of dimension 1 m by 1 m) over three evaluated trajectory patterns and up to 7.3 cm accuracy in targeting task with two target patterns of 1 m achieved by SwarmPaint interface. Moreover, the participants evaluated the trajectory drawing interface as more intuitive (12.9 %) and requiring less effort to utilize (22.7%) than direct shape and position control by gestures, although its physical workload and failure in performance were presumed as more significant (by 9.1% and 16.3%, respectively). △ Less

Submitted 28 June, 2021; originally announced June 2021.

Comments: ICUAS 21, 20XXIEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

DroneTrap: Drone Catching in Midair by Soft Robotic Hand with Color-Based Force Detection and Hand Gesture Recognition

Authors: Aleksey Fedoseev, Valerii Serpiva, Ekaterina Karmanova, Miguel Altamirano Cabrera, Vladimir Shirokun, Iakov Vasilev, Stanislav Savushkin, Dzmitry Tsetserukou

Abstract: The paper proposes a novel concept of docking drones to make this process as safe and fast as possible. The idea behind the project is that a robot with a soft gripper grasps the drone in midair. The human operator navigates the robotic arm with the ML-based gesture recognition interface. The 3-finger robot hand with soft fingers is equipped with touch sensors, making it possible to achieve safe d… ▽ More The paper proposes a novel concept of docking drones to make this process as safe and fast as possible. The idea behind the project is that a robot with a soft gripper grasps the drone in midair. The human operator navigates the robotic arm with the ML-based gesture recognition interface. The 3-finger robot hand with soft fingers is equipped with touch sensors, making it possible to achieve safe drone catching and avoid inadvertent damage to the drone's propellers and motors. Additionally, the soft hand is featured with a unique color-based force estimation technology based on a computer vision (CV) system. Moreover, the visual color-changing system makes it easier for the human operator to interpret the applied forces. Without any additional programming, the operator has full real-time control of the robot's motion and task execution by wearing a mocap glove with gesture recognition, which was developed and applied for the high-level control of DroneTrap. The experimental results revealed that the developed color-based force estimation can be applied for rigid object capturing with high precision (95.3\%). The proposed technology can potentially revolutionize the landing and deployment of drones for parcel delivery on uneven ground, structure maintenance and inspection, risque operations, and etc. △ Less

Submitted 4 August, 2021; v1 submitted 7 February, 2021; originally announced February 2021.

Comments: Published in: 2021 IEEE 4th International Conference on Soft Robotics (RoboSoft), https://ieeexplore.ieee.org/document/9479353, IEEE copyright, "(c) 20XX IEEE...", 7 pages, 15 figures

MaskBot: Real-time Robotic Projection Map** with Head Motion Tracking

Authors: Miguel Altamirano-Cabrera, Igor Usachev, Juan Heredia, Jonathan Tirado, Aleksey Fedoseev, Dzmitry Tsetserukou

Abstract: The projection map** systems on the human face is limited by the latency and the movement of the users. The area of the projection is restricted by the position of the projectors and the cameras. We are introducing MaskBot, a real-time projection map** system operated by a 6 Degrees of Freedom (DoF) collaborative robot. The collaborative robot locates the projector and camera in normal positio… ▽ More The projection map** systems on the human face is limited by the latency and the movement of the users. The area of the projection is restricted by the position of the projectors and the cameras. We are introducing MaskBot, a real-time projection map** system operated by a 6 Degrees of Freedom (DoF) collaborative robot. The collaborative robot locates the projector and camera in normal position to the face of the user to increase the projection area and to reduce the latency of the system. A webcam is used to detect the face and to sense the robot-user distance to modify the projection size and orientation. MaskBot projects different images on the face of the user, such as face modifications, make-up, and logos. In contrast to the existing methods, the presented system is the first that introduces a robotic projection map**. One of the prospective applications is to acquire a dataset of adversarial images to challenge face detection DNN systems, such as Face ID. △ Less

Submitted 7 November, 2020; originally announced November 2020.

Comments: Accepted to the ACM SIGGRAPH ASIA 2020 conference (Emerging Technologies section), ACM copyright, 2 pages, 2 figures

TeslaMirror: Multistimulus Encounter-Type Haptic Display for Shape and Texture Rendering in VR

Authors: Aleksey Fedoseev, Akerke Tleugazy, Luiza Labazanova, Dzmitry Tsetserukou

Abstract: This paper proposes a novel concept of a hybrid tactile display with multistimulus feedback, allowing the real-time experience of the position, shape, and texture of the virtual object. The key technology of the TeslaMirror is that we can deliver the sensation of object parameters (pressure, vibration, and electrotactile feedback) without any wearable haptic devices. We developed the full digital… ▽ More This paper proposes a novel concept of a hybrid tactile display with multistimulus feedback, allowing the real-time experience of the position, shape, and texture of the virtual object. The key technology of the TeslaMirror is that we can deliver the sensation of object parameters (pressure, vibration, and electrotactile feedback) without any wearable haptic devices. We developed the full digital twin of the 6 DOF UR robot in the virtual reality (VR) environment, allowing the adaptive surface simulation and control of the hybrid display in real-time. The preliminary user study was conducted to evaluate the ability of TeslaMirror to reproduce shape sensations with the under-actuated end-effector. The results revealed that potentially this approach can be used in the virtual systems for rendering versatile VR shapes with high fidelity haptic experience. △ Less

Submitted 5 December, 2023; v1 submitted 23 June, 2020; originally announced June 2020.

Comments: Accepted to the ACM SIGGRAPH 2020 conference (Emerging Technologies section), ACM copyright, 2 pages, 3 figures, 1 table

Coupling of localization and depth data for map** using Intel RealSense T265 and D435i cameras

Authors: Evgeny Tsykunov, Valery Ilin, Stepan Perminov, Aleksey Fedoseev, Elvira Zainulina

Abstract: We propose to couple two types of Intel RealSense sensors (tracking T265 and depth D435i) in order to obtain localization and 3D occupancy map of the indoor environment. We implemented a python-based observer pattern with multi-threaded approach for camera data synchronization. We compared different point cloud (PC) alignment methods (using transformations obtained from tracking camera and from IC… ▽ More We propose to couple two types of Intel RealSense sensors (tracking T265 and depth D435i) in order to obtain localization and 3D occupancy map of the indoor environment. We implemented a python-based observer pattern with multi-threaded approach for camera data synchronization. We compared different point cloud (PC) alignment methods (using transformations obtained from tracking camera and from ICP family methods). Tracking camera and PC alignment allow us to generate a set of transformations between frames. Based on these transformations we obtained different trajectories and provided their analysis. Finally, having poses for all frames, we combined depth data. Firstly we obtained a joint PC representing the whole scene. Then we used Octomap representation to build a map. △ Less

Submitted 1 April, 2020; originally announced April 2020.

Manifolds of Triangulations, braid groups of manifolds and the groups $Γ_{n}^{k}$

Authors: D. A. Fedoseev, I. M. Nikonov, V. O. Manturov

Abstract: The spaces of triangulations of a given manifold have been widely studied. The celebrated theorem of Pachner~\cite{Pachner} says that any two triangulations of a given manifold can be connected by a sequence of bistellar moves, or Pachner moves, see also~\cite{GKZ,Nabutovsky}. In the present paper we consider groups which naturally appear when considering the set of triangulations with fixed numbe… ▽ More The spaces of triangulations of a given manifold have been widely studied. The celebrated theorem of Pachner~\cite{Pachner} says that any two triangulations of a given manifold can be connected by a sequence of bistellar moves, or Pachner moves, see also~\cite{GKZ,Nabutovsky}. In the present paper we consider groups which naturally appear when considering the set of triangulations with fixed number of simplices of maximal dimension. There are three ways of introducing this groups: the geometrical one, which depends on the metric, the topological one, and the combinatorial one. The second one can be thought of as a ``braid group'' of the manifold and, by definition, is an invariant of the topological type of manifold; in a similar way, one can construct the smooth version. We construct a series of groups $Γ_{n}^{k}$ corresponding to Pachner moves of $(k-2)$-dimensional manifolds and construct a canonical map from the braid group of any $k$-dimensional manifold to $Γ_{n}^{k}$ thus getting topological/smooth invariants of these manifolds. △ Less

Submitted 21 December, 2020; v1 submitted 4 December, 2019; originally announced December 2019.

Comments: arXiv admin note: substantial text overlap with arXiv:1905.08049 authors' note: arXiv:1905.08049 is a survey paper which includes the results of the present paper

MSC Class: 57M25; 57M27

Development of MirrorShape: High Fidelity Large-Scale Shape Rendering Framework for Virtual Reality

Authors: Aleksey Fedoseev, Nikita Chernyadev, Dzmitry Tsetserukou

Abstract: Today there is a high variety of haptic devices capable of providing tactile feedback. Although most of existing designs are aimed at realistic simulation of the surface properties, their capabilities are limited in attempts of displaying shape and position of virtual objects. This paper suggests a new concept of distributed haptic display for realistic interaction with virtual object of complex s… ▽ More Today there is a high variety of haptic devices capable of providing tactile feedback. Although most of existing designs are aimed at realistic simulation of the surface properties, their capabilities are limited in attempts of displaying shape and position of virtual objects. This paper suggests a new concept of distributed haptic display for realistic interaction with virtual object of complex shape by a collaborative robot with shape display end-effector. MirrorShape renders the 3D object in virtual reality (VR) system by contacting the user hands with the robot end-effector at the calculated point in real-time. Our proposed system makes it possible to synchronously merge the position of contact point in VR and end-effector in real world. This feature provides presentation of different shapes, and at the same time expands the working area comparing to desktop solutions. The preliminary user study revealed that MirrorShape was effective at reducing positional error in VR interactions. Potentially this approach can be used in the virtual systems for rendering versatile VR objects with wide range of sizes with high fidelity large-scaleshape experience. △ Less

Submitted 17 November, 2019; originally announced November 2019.

Comments: Accepted to the 25th ACM Symposium on Virtual Reality Software and Technology (VRST'19), ACM copyright

Deploying a Top-100 Supercomputer for Large Parallel Workloads: the Niagara Supercomputer

Authors: Marcelo Ponce, Ramses van Zon, Scott Northrup, Daniel Gruner, Joseph Chen, Fatih Ertinaz, Alexey Fedoseev, Leslie Groer, Fei Mao, Bruno C. Mundim, Mike Nolta, Jaime Pinto, Marco Saldarriaga, Vladimir Slavnic, Erik Spence, Ching-Hsing Yu, W. Richard Peltier

Abstract: Niagara is currently the fastest supercomputer accessible to academics in Canada. It was deployed at the beginning of 2018 and has been serving the research community ever since. This homogeneous 60,000-core cluster, owned by the University of Toronto and operated by SciNet, was intended to enable large parallel jobs and has a measured performance of 3.02 petaflops, debuting at #53 in the June 201… ▽ More Niagara is currently the fastest supercomputer accessible to academics in Canada. It was deployed at the beginning of 2018 and has been serving the research community ever since. This homogeneous 60,000-core cluster, owned by the University of Toronto and operated by SciNet, was intended to enable large parallel jobs and has a measured performance of 3.02 petaflops, debuting at #53 in the June 2018 TOP500 list. It was designed to optimize throughput of a range of scientific codes running at scale, energy efficiency, and network and storage performance and capacity. It replaced two systems that SciNet operated for over 8 years, the Tightly Coupled System (TCS) and the General Purpose Cluster (GPC). In this paper we describe the transition process from these two systems, the procurement and deployment processes, as well as the unique features that make Niagara a one-of-a-kind machine in Canada. △ Less

Submitted 31 July, 2019; originally announced July 2019.

Comments: PEARC'19: "Practice and Experience in Advanced Research Computing", July 28-August 1, 2019, Chicago, IL, USA

On Groups $G_{n}^{k}$ and $Γ_{n}^{k}$: A Study of Manifolds, Dynamics, and Invariants

Authors: Vassily O. Manturov, Denis A. Fedoseev, Seongjeong Kim, Igor M. Nikonov

Abstract: Recently the first named author defined a 2-parametric family of groups $G_n^k$. Those groups may be regarded as analogues of braid groups. Study of the connection between the groups $G_n^k$ and dynamical systems led to the discovery of the following fundamental principle: If dynamical systems describing the motion of $n$ particles possess a nice codimension 1 property governed by exactly $k$ part… ▽ More Recently the first named author defined a 2-parametric family of groups $G_n^k$. Those groups may be regarded as analogues of braid groups. Study of the connection between the groups $G_n^k$ and dynamical systems led to the discovery of the following fundamental principle: If dynamical systems describing the motion of $n$ particles possess a nice codimension 1 property governed by exactly $k$ particles, then these dynamical systems admit a topological invariant valued in $G_{n}^{k}$. The $G_n^k$ groups have connections to different algebraic structures. Study of the $G_n^k$ groups led to, in particular, the construction of invariants, valued in free products of cyclic groups. All generators of the $G_{n}^{k}$ groups are reflections but there are many ways to enhance them to get rid of $2$-torsion. Later the first and the fourth named authors introduced and studied the second family of groups, denoted by $Γ_n^k$, which are closely related to triangulations of manifolds. The spaces of triangulations of a given manifolds have been widely studied. Theorem of Pachner says that any two triangulations of a given manifold can be connected by a sequence of bistellar moves or Pachner moves. $Γ_n^k$ naturally appear when considering the set of triangulations with the fixed number of points. There are two ways of introducing $Γ_n^k$: the geometrical one, which depends on the metric, and the topological one. The second one can be thought of as a «braid group» of the manifold and is an invariant of the topological type of manifold; in a similar way, one can construct the smooth version. In the present paper we give a survey of the ideas lying in the foundation of the $G_n^k$ and $Γ_n^k$ theories and give an overview of recent results in the study of those groups, manifolds, dynamical systems, knot and braid theories. △ Less

Submitted 29 March, 2021; v1 submitted 20 May, 2019; originally announced May 2019.

Comments: 135 pages, 109 figures

A new approach to the inverse problem for current map** in thin-film superconductors

Authors: J. W. Zuber, F. S. Wells, S. A. Fedoseev, T. H. Johansen, A. B. Rosenfeld, A. V. Pan

Abstract: A novel mathematical approach has been developed to complete the inversion of the Biot-Savart law in one- and two-dimensional cases from measurements of the perpendicular component of the magnetic field using the well-developed Magneto-Optical Imaging technique. Our approach, especially in the 2D case, is provided in great detail to allow a straightforward implementation as opposed to those found… ▽ More A novel mathematical approach has been developed to complete the inversion of the Biot-Savart law in one- and two-dimensional cases from measurements of the perpendicular component of the magnetic field using the well-developed Magneto-Optical Imaging technique. Our approach, especially in the 2D case, is provided in great detail to allow a straightforward implementation as opposed to those found in the literature. Our new approach also refines our previous results for the 1D case [Johansen et al., Phys. Rev. B 54, 16264 (1996)], and streamlines the method developed by Jooss et al. [Physica C 299, 215 (1998)] deemed as the most accurate if compared to that of Roth et al. [J. Appl. Phys. 65, 361 (1989)]. We also verify and streamline the iterative technique, which was developed following Laviano et al. [Supercond. Sci. Technol. 16, 71 (2002)] to account for in-plane magnetic fields caused by the bending of the applied magnetic field due to the demagnetising effect. After testing on magneto-optical images of a high quality YBa2Cu3O7 superconducting thin film, we show that the procedure employed is effective. △ Less

Submitted 17 July, 2018; originally announced July 2018.

Journal ref: JOURNAL OF APPLIED PHYSICS 123, 123906 (2018)

Analysis of low-field isotropic vortex glass containing vortex groups in YBCO thin films visualized by scanning SQUID microscopy

Authors: Frederick S. Wells, Alexey V. Pan, X. Renshaw Wang, Sergey A. Fedoseev, Hans Hilgenkamp

Abstract: The glass-like vortex distribution in pulsed laser deposited YBCO thin films is observed by scanning superconducting quantum interference device microscopy and analysed for ordering after cooling in magnetic fields significantly smaller than the Earth's field. Autocorrelation calculations on this distribution show a weak short-range positional order, while Delaunay triangulation shows a near-compl… ▽ More The glass-like vortex distribution in pulsed laser deposited YBCO thin films is observed by scanning superconducting quantum interference device microscopy and analysed for ordering after cooling in magnetic fields significantly smaller than the Earth's field. Autocorrelation calculations on this distribution show a weak short-range positional order, while Delaunay triangulation shows a near-complete lack of orientational order. The distribution of these vortices is finally characterised as an isotropic vortex glass. Abnormally closely spaced groups of vortices, which are statistically unlikely to occur, are observed above a threshold magnetic field. The origin of these groups is discussed, but will require further investigation. △ Less

Submitted 17 July, 2018; originally announced July 2018.

Journal ref: Scientific Reports 5 8677 (2015)

Observation of Transient Overcritical Currents in YBCO Thin Films using High-Speed Magneto-Optical Imaging and Dynamic Current Map**

Authors: Frederick S. Wells, Alexey V. Pan, Igor A. Golovchanskiy, Sergey A. Fedoseev, Anatoly Rozenfeld

Abstract: The dynamics of transient current distributions in superconducting YBCO thin films were investigated during and immediately following an external field ramp, using high-speed (real-time) Magneto-Optical Imaging and calculation of dynamic current profiles. A number of qualitatively unique and previously unobserved features are seen in this novel analysis of the evolution of supercurrent during pene… ▽ More The dynamics of transient current distributions in superconducting YBCO thin films were investigated during and immediately following an external field ramp, using high-speed (real-time) Magneto-Optical Imaging and calculation of dynamic current profiles. A number of qualitatively unique and previously unobserved features are seen in this novel analysis of the evolution of supercurrent during penetration. As magnetic field ramps up from zero, the dynamic current profile is characterized by strong peaks, the magnitude of which exceed the conventional critical current density (as determined from static current profiles). These peaks develop close to the sample edges, initially resembling screening currents but quickly growing in intensity as the external field increases. A discontinuity in field and current behaviour is newly observed, indicating a novel transition from increasing peak current toward relaxation behaviour. After this transition, the current peaks move toward the centre of the sample while reducing in intensity as magnetic vortices penetrate inward. This motion slows exponentially with time, with the current distribution in the long-time limit reducing to the expected Kim-model profile. △ Less

Submitted 17 July, 2018; originally announced July 2018.

Journal ref: Scientific Reports 7 40235 (2017)

Parities on 2-knots and 2-links

Authors: Denis A. Fedoseev, Vassily O. Manturov

Abstract: 2-dimensional knots and links are studied in the article. The notion of parity is introduced via techniques similar to the ones used by the second named author in 1-dimensional case. By using parity new invariants are constructed and known invariants are refined. 2-dimensional knots and links are studied in the article. The notion of parity is introduced via techniques similar to the ones used by the second named author in 1-dimensional case. By using parity new invariants are constructed and known invariants are refined. △ Less

Submitted 22 June, 2016; originally announced June 2016.

Comments: 24 pages, 16 figures

MSC Class: 57Q45; 57M27

An Inverse Problem for Sturm-Liouville Operators on the Half-line Having Bessel-type Singularity in an Interior Point

Authors: Alexey Fedoseev

Abstract: We study the inverse problem of recovering Sturm-Liouville operators on the half-line with a Bessel-type singularity inside the interval from the given Weyl function. The corresponding uniqueness theorem is proved, a constructive procedure for the solution of the inverse problem is provided, also necessary and sufficient conditions for the solvability of the inverse problem are obtained. We study the inverse problem of recovering Sturm-Liouville operators on the half-line with a Bessel-type singularity inside the interval from the given Weyl function. The corresponding uniqueness theorem is proved, a constructive procedure for the solution of the inverse problem is provided, also necessary and sufficient conditions for the solvability of the inverse problem are obtained. △ Less

Submitted 11 November, 2012; originally announced November 2012.

MSC Class: 34A55 (Primary) 34B24; 34L05; 34L05; 47E05 (Secondary)

Generalization of Bertrand's theorem to surfaces of revolution

Authors: Denis A. Fedoseev, Elena A. Kudryavtseva, Oleg A. Zagryadsky

Abstract: The generalization of Bertrand's theorem to abstract surfaces of revolution without "equators" is proved. We prove a criterion for the existence on such a surface of exactly two central potentials (up to an additive and a multiplicative constants) all of whose bounded nonsingular orbits are closed and which admit a bounded nonsingular noncircular orbit. A criterion for the existence of a unique su… ▽ More The generalization of Bertrand's theorem to abstract surfaces of revolution without "equators" is proved. We prove a criterion for the existence on such a surface of exactly two central potentials (up to an additive and a multiplicative constants) all of whose bounded nonsingular orbits are closed and which admit a bounded nonsingular noncircular orbit. A criterion for the existence of a unique such potential is proved. The geometry and classification of the corresponding surfaces are described, with indicating either the pair of gravitational and oscillator) potentials or the unique (oscillator) potential. The absence of the required potentials on any surface which does not meet the above criteria is proved. △ Less

Submitted 10 June, 2012; v1 submitted 4 September, 2011; originally announced September 2011.

Comments: 37 pages, 5 figures, in Russian

MSC Class: 70B05; 70H12; 70F17; 70H33; 70H06; 53A35; 53A20

Journal ref: Sb. Math., 203:8 (2012), 1112-1150

On Long Virtual Biquanles

Authors: D. A. Fedoseev

Abstract: Virtual quandles with two operations are discussed in the article. Certain knot invariant is constructed and used to distinguish two long virtual knots. Virtual quandles with two operations are discussed in the article. Certain knot invariant is constructed and used to distinguish two long virtual knots. △ Less

Submitted 10 January, 2011; originally announced January 2011.