-
Eliminating the spin-down critical angle in polarizing neutron optics for expanding the polarization bandwidth
Authors:
A. Zubayer,
N. Ghafoor,
A. Glavic,
J. Stahn,
M. Lorentzon,
A. Le Febvrier,
P. Eklund,
J. Birch,
F. Eriksson
Abstract:
Polarized neutron scattering is a very important analysis technique for studies of magnetism, spintronics, and high-sensitivity measurements, among others, offering invaluable information. Yet, the efficiency of such experiments rely on the performance of the polarizing neutron optics to provide high reflectivity and polarization. Presently, state-of-the-art polarizers like Fe/Si supermirrors are…
▽ More
Polarized neutron scattering is a very important analysis technique for studies of magnetism, spintronics, and high-sensitivity measurements, among others, offering invaluable information. Yet, the efficiency of such experiments rely on the performance of the polarizing neutron optics to provide high reflectivity and polarization. Presently, state-of-the-art polarizers like Fe/Si supermirrors are not able to polarize neutrons at low scattering angles in a monochromatic beam or able to polarize neutrons with a variety of wavelengths as for a non-monochromatic beam. To overcome this limitation, it is suggested to use Co/Ti multilayers on Ti substrates owing to their favorable scattering length density characteristics. It is shown that this approach enables a wavelength bandwidth several times larger than achievable with state-of-the-art materials on Si or glass substrates. Consequently, enabling the possibility of polarizing neutrons across an extended wavelength range, including those with very high wavelengths.
△ Less
Submitted 7 April, 2024;
originally announced April 2024.
-
Electronic structure and thermoelectric properties of epitaxial Sc1-xVxNy thin films grown on MgO(001)
Authors:
Susmita Chowdhury,
Niraj Kumar Singh,
Sanath Kumar Honnali,
Grzegorz Greczynski,
Per Eklund,
Arnaud le Febvrier,
Martin Magnuson
Abstract:
The electronic structure of Sc1-xVxNy epitaxial films with different alloying concentrations of V are investigated with respect to effects on thermoelectric properties. Band structure calculations on Sc0.75V0.25N indicate that V 3d states lie in the band gap of the parent ScN compound in the vicinity of the Fermi level. Thus, theoretically the presence of light (dispersive) bands at the Γ-point wi…
▽ More
The electronic structure of Sc1-xVxNy epitaxial films with different alloying concentrations of V are investigated with respect to effects on thermoelectric properties. Band structure calculations on Sc0.75V0.25N indicate that V 3d states lie in the band gap of the parent ScN compound in the vicinity of the Fermi level. Thus, theoretically the presence of light (dispersive) bands at the Γ-point with band multiplicity is expected to lead to lower electrical resistivity while flat (heavy) bands at X-W-K symmetry points are associated with higher Seebeck coefficient than that of ScN. With this aim, epitaxial Sc1-xVxNy thin film samples were deposited on MgO(001) substrates. All the samples showed N substoichiometry and pseudocubic crystal structure. The N-vacancy-induced states were visible in the Sc 2p XAS spectra. The reference ScN and Sc1-xVxNy samples up to x = 0.12 were n type, exhibiting carrier concentration of 1021 cm-3, typical for degenerate semiconductors. For the highest V alloying of x = 0.15, holes became the majority charge carrier as indicated by the positive Seebeck coefficient. The underlying electronic structure and bonding mechanism in Sc1-xVxNy influence the electrical resistivity, Seebeck coefficient, and Hall effect. Thus, the work contributes to the fundamental understanding of the correlated defects and thermoelectric properties to the electronic structure in Sc-N system with V alloying.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Effects of W alloying on the electronic structure, phase stability and thermoelectric power factor in epitaxial CrN thin films
Authors:
Niraj Kumar Singh,
Victor Hjort,
Sanath Kumar Honnali,
Davide Gambino,
Arnaud le Febvrier,
Ganpati Ramanath,
Björn Alling,
Per Eklund
Abstract:
CrN-based alloy thin films are of interest as thermoelectric materials for energy harvesting. Ab initio calculations show that dilute alloying of CrN with 3 at.% W substituting Cr, induce flat electronic bands and push the Fermi level EF into the conduction band, while retaining dispersive Cr 3d bands. These features are conducive for both high electrical conductivity σand high Seebeck coefficient…
▽ More
CrN-based alloy thin films are of interest as thermoelectric materials for energy harvesting. Ab initio calculations show that dilute alloying of CrN with 3 at.% W substituting Cr, induce flat electronic bands and push the Fermi level EF into the conduction band, while retaining dispersive Cr 3d bands. These features are conducive for both high electrical conductivity σand high Seebeck coefficient α, and hence the thermoelectric power factor α^2σ. To investigate this possibility, epitaxial CrWxNz films were grown on c-plane sapphire by dc-magnetron sputtering. However, even films with the lowest W concentration (x = 0.03) in our study contained metallic h-Cr2N, which is not conducive for a high α. Nevertheless, the films exhibit a sizeable power factor of α^2σ~ 4.7 x 10-4 Wm-1K-2 due to high σ~ 700 Scm-1, and a moderate α~ -25 ~{^^^^00b5}V/K. Increasing h-Cr2N fractions in the 0.03 < x \le 0.19 range monotonically increases σ, but severely diminishes αleading to two orders of magnitude decrease in α^2σ. This trend continues with x > 0.19 due to W precipitation. These findings indicate that dilute W additions below its solubility limit in CrN is important for realizing high thermoelectric power factor in CrWxNz alloy films.
△ Less
Submitted 25 June, 2024; v1 submitted 4 November, 2023;
originally announced November 2023.
-
Thermoelectric properties and electronic structure of Cr(Mo,V)Nx thin films studied by synchrotron and lab-based X-ray spectroscopy
Authors:
Susmita Chowdhury,
Victor Hjort,
Rui Shu,
Grzegorz Greczynski,
Arnaud le Febvrier,
Per Eklund,
Martin Magnuson
Abstract:
Chromium-based nitrides are used in hard, resilient coatings, and show promise for thermoelectric applications due to their combination of structural, thermal, and electronic properties. Here, we investigated the electronic structures and chemical bonding correlated to the thermoelectric properties of epitaxially grown chromium-based multicomponent nitride Cr(Mo,V)Nx thin films. Due to minuscule N…
▽ More
Chromium-based nitrides are used in hard, resilient coatings, and show promise for thermoelectric applications due to their combination of structural, thermal, and electronic properties. Here, we investigated the electronic structures and chemical bonding correlated to the thermoelectric properties of epitaxially grown chromium-based multicomponent nitride Cr(Mo,V)Nx thin films. Due to minuscule N vacancies, finite population of Cr 3d and N 2p states appear at the Fermi level and diminishes the band opening for Cr0.51N0.49. Incorporating holes by alloying V in N deficient CrN matrix results in enhanced thermoelectric power factor with marginal change in the charge transfer of Cr to N compared to Cr0.51N0.49. Further alloying Mo isoelectronic to Cr increases the density of states across the Fermi level due to hybridization of the (Cr, V) 3d and Mo 4d-N 2p states in Cr(Mo,V)Nx. The hybridization effect with reduced N 2p states off from stoichiometry drives the system towards metal like electrical resistivity and reduction in Seebeck coefficient compensating the overall power factor still comparable to Cr0.51N0.49. The N deficiency also depicts a critical role in reduction of the charge transfer from metal to N site. The present work envisages ways for enhancing thermoelectric properties through electronic band engineering by alloying and competing effects of N vacancies.
△ Less
Submitted 24 August, 2023; v1 submitted 21 August, 2023;
originally announced August 2023.
-
Reflective, polarizing, and magnetically soft amorphous Fe/Si multilayer neutron optics with isotope-enriched 11B4C inducing atomically flat interfaces
Authors:
A. Zubayer,
N. Ghafoor,
K. A. Thórarinsdóttir,
S. Stendahl,
A. Glavic,
J. Stahn,
G. Nagy,
G. Greczynski,
M. Schwartzkopf,
A. Le Febvrier,
P. Eklund,
J. Birch,
F. Magnus,
F. Eriksson
Abstract:
The utilization of polarized neutrons is of great importance in scientific disciplines spanning materials science, physics, biology, and chemistry. Polarization analysis offers insights into otherwise unattainable sample information such as magnetic domains and structures, protein crystallography, composition, orientation, ion-diffusion mechanisms, and relative location of molecules in multicompon…
▽ More
The utilization of polarized neutrons is of great importance in scientific disciplines spanning materials science, physics, biology, and chemistry. Polarization analysis offers insights into otherwise unattainable sample information such as magnetic domains and structures, protein crystallography, composition, orientation, ion-diffusion mechanisms, and relative location of molecules in multicomponent biological systems. State-of-the-art multilayer polarizing neutron optics have limitations, particularly low specular reflectivity and polarization at higher scattering vectors/angles, and the requirement of high external magnetic fields to saturate the polarizer magnetization. Here, we show that by incorporating 11B4C into Fe/Si multilayers, amorphization and smooth interfaces can be achieved, yielding higher neutron reflectivity, less diffuse scattering and higher polarization. Magnetic coercivity is eliminated, and magnetic saturation can be reached at low external fields (>2 mT). This approach offers prospects for significant improvement in polarizing neutron optics, enabling; nonintrusive positioning of the polarizer, enhanced flux, increased data accuracy, and further polarizing/analyzing methods at neutron scattering facilities.
△ Less
Submitted 15 August, 2023;
originally announced August 2023.
-
Valence electron concentration- and N vacancy-induced elasticity in cubic early transition metal nitrides
Authors:
Soheil Karimi Aghda,
Dimitri Bogdanovski,
Lukas Loefler,
Heng Han Sua,
Lena Patterer,
Damian M. Holzapfel,
Arnaud le Febvrier,
Marcus Hans,
Daniel Primetzhofer,
Jochen M. Schneider
Abstract:
Motivated by frequently reported deviations from stoichiometry in cubic transition metal nitride (TMNx) thin films, the effect of N-vacancy concentration on the elastic properties of cubic TiNx, ZrNx, VNx, NbNx, and MoNx (0.72<x<1.00) is systematically studied by density functional theory (DFT) calculations. The predictions are validated experimentally for VNx (0.77<x<0.97). The DFT results indica…
▽ More
Motivated by frequently reported deviations from stoichiometry in cubic transition metal nitride (TMNx) thin films, the effect of N-vacancy concentration on the elastic properties of cubic TiNx, ZrNx, VNx, NbNx, and MoNx (0.72<x<1.00) is systematically studied by density functional theory (DFT) calculations. The predictions are validated experimentally for VNx (0.77<x<0.97). The DFT results indicate that the elastic behavior of the TMNx depends on both the N-vacancy concentration and the valence electron concentration (VEC) of the transition metal: While TiNx and ZrNx exhibit vacancy-induced reductions in elastic modulus, VNx and NbNx show an increase. These trends can be rationalized by considering vacancy-induced changes in elastic anisotropy and bonding. While introduction of N-vacancies in TiNx results in a significant reduction of elastic modulus along all directions and a lower average bond strength of Ti-N, the vacancy-induced reduction in [001] direction of VNx is overcompensated by the higher stiffness along [011] and [111] directions, resulting in a higher average bond strength of V-N. To validate the predicted vacancy-induced changes in elasticity experimentally, close-to-single-crystal VNx (0.77<x<0.97) are grown on MgO(001) substrates. As the N-content is reduced, the relaxed lattice parameter a0, as probed by X-ray diffraction, decreases from 4.128 A to 4.096 A. This reduction in lattice parameter is accompanied by an anomalous 11% increase in elastic modulus, as determined by nanoindentation. As the experimental data agree with the predictions, the elasticity enhancement in VNx upon N-vacancy formation can be understood based on the concomitant changes in elastic anisotropy and bonding.
△ Less
Submitted 27 May, 2023;
originally announced May 2023.
-
Enhanced Thermoelectric Properties By Embedding Fe Nanoparticles Into CrN Films For Energy Harvesting Applications
Authors:
Daria Pankratova,
Khabib Yusupov,
Alberto Vomiero,
Sanath Kumar Honnali,
Robert Boyd,
Sebastian Ekeroth,
Ulf Helmersson,
Clio Azina,
Arnaud le Febvrier
Abstract:
Nanostructured materials and nanocomposites have shown great promise for improving the efficiency of thermoelectric materials. Herein, Fe nanoparticles were imbedded into a CrN matrix by combining two physical vapor deposition approaches, namely high-power impulse magnetron sputtering and a nanoparticle gun. The combination of these techniques allowed the formation of nanocomposites in which the F…
▽ More
Nanostructured materials and nanocomposites have shown great promise for improving the efficiency of thermoelectric materials. Herein, Fe nanoparticles were imbedded into a CrN matrix by combining two physical vapor deposition approaches, namely high-power impulse magnetron sputtering and a nanoparticle gun. The combination of these techniques allowed the formation of nanocomposites in which the Fe nanoparticles remained intact without intermixing with the matrix. The electrical and thermal transport properties of the nanocomposites were investigated and compared to a monolithic CrN film. The measured thermoelectric properties revealed an increase in the Seebeck coefficient, with a decrease of hall carrier concentration and an increase of the electron mobility which could be explained by energy filtering by internal phases created at the NP/matrix interface. The thermal conductivity of the final nanocomposite was reduced from 4.8 W m-1K-1 to a minimum of 3.0 W m-1K-1 W. This study shows prospects for the nanocomposite synthesis process using nanoparticles and its use in improving the thermoelectric properties of coatings.
△ Less
Submitted 8 January, 2024; v1 submitted 15 April, 2023;
originally announced April 2023.
-
Phase formation in CrFeCoNi nitride thin films
Authors:
Smita G. Rao,
Boburjon Mukhamedov,
Gyula Nagy,
Eric N. Tseng,
Rui Shu,
Robert Boyd,
Daniel Primetzhofer,
Per O. Å. Persson,
Björn Alling,
Igor A. Abrikosov,
Arnaud le Febvrier,
Per Eklund
Abstract:
As a single-phase alloy, CrFeCoNi is a face centered cubic (fcc) material related to the archetypical high-entropy Cantor alloy CrFeCoNiMn. For thin films, CrFeCoNi of approximately equimolar composition tends to assume an fcc structure when grown at room temperature by magnetron sputtering. However, the single-phase solid solution state is typically not achieved for thin films grown at higher tem…
▽ More
As a single-phase alloy, CrFeCoNi is a face centered cubic (fcc) material related to the archetypical high-entropy Cantor alloy CrFeCoNiMn. For thin films, CrFeCoNi of approximately equimolar composition tends to assume an fcc structure when grown at room temperature by magnetron sputtering. However, the single-phase solid solution state is typically not achieved for thin films grown at higher temperatures. The same holds true for Cantor alloy-based ceramics (nitrides and oxides), where phase formation is extremely sensitive to process parameters such as the amount of reactive gas. This study combines theoretical and experimental methods to understand the phase formation in nitrogen-containing CrFeCoNi thin films. Density functional theory calculations considering three competing phases (CrN, Fe-Ni and Co) show that the free energy of mixing, delta G of (CrFeCoNi)1-xNx solid solutions has a maximum at x = 0.20-0.25, and delta G becomes lower when x less than 0.20, greater than 0.25. Thin films of (CrFeCoNi)1-xNx (x = 0.14-0.41) grown by magnetron sputtering show stabilization of the metallic fcc when x lesser than or equal to 0.22 and the stabilization of the NaCl B1 structure when x is greater than 0.33, consistent with the theoretical prediction. In contrast, films with intermediate amounts of nitrogen (x = 0.22) grown at higher temperatures show segregation into multiple phases of CrN, Fe-Ni-rich and Co. These results offer an explanation for the requirement of kinetically limited growth conditions at low temperature for obtaining single-phase CrFeCoNi Cantor-like nitrogen-containing thin films and are of importance for understanding the phase-formation mechanisms in multicomponent ceramics.
△ Less
Submitted 10 November, 2022;
originally announced November 2022.
-
Influence of generated defects by Ar-implantation on the thermoelectric properties of ScN
Authors:
R. Burcea,
J. -F. Barbot,
P. -O. Renault,
D. Eyidi,
T. Girardeau,
M. Marteau,
F. Giovannelli,
A. Zenji,
J-M. Rampnoux,
S. Dilhaire,
P. Eklund,
A. Le Febvrier
Abstract:
Nowadays, making thermoelectric materials more efficient in energy conversion is still a challenge. In this work, to reduce the thermal conductivity and thus improve the overall thermoelectric performances, point and extended defects were generated in epitaxial 111-ScN thin films by implantation using argon ions. The films were investigated by structural, optical, electrical, and thermoelectric ch…
▽ More
Nowadays, making thermoelectric materials more efficient in energy conversion is still a challenge. In this work, to reduce the thermal conductivity and thus improve the overall thermoelectric performances, point and extended defects were generated in epitaxial 111-ScN thin films by implantation using argon ions. The films were investigated by structural, optical, electrical, and thermoelectric characterization methods. The results demonstrated that argon implantation leads to the formation of stable defects (up to 750 K operating temperature) were identified as interstitial type defect clusters and so-called argon-vacancy complexes. The insertion of those specific defects induces acceptor-type deep levels in the bandgap yielding to a reduce of the free carrier mobility. With a reduce electrical conductivity, the irradiated sample exhibited higher Seebeck coefficient maintaining the power factor of the film. The thermal conductivity is strongly reduced from 12 to 3 W.m-1.K-1 at 300 K, showing the effect of defects in increasing phonon scattering. Subsequent high temperature annealing, at 1573 K, leads to the progressive evolution of defects: the initial clusters of interstitial evolved to the benefit of smaller clusters and the formation of bubble. Thus, the number of free carriers, the resistivity and the Seebeck coefficient are almost restored but the mobility of the carriers remains low and a 30% drop in thermal conductivity is still effective (8.5 W.m-1.K-1). This study shows that the control defect engineering with defects introduced by irradiation using noble gases in a thermoelectric coating can be an attractive method to enhance the figure of merit of thermoelectric materials.
△ Less
Submitted 10 August, 2022; v1 submitted 24 March, 2022;
originally announced March 2022.
-
P-type behavior of CrN thin films by control of point defects
Authors:
Arnaud le Febvrier,
Davide Gambino,
Fabien Giovannelli,
Babak Bakhit,
Simon Hurand,
Gregory Abadias,
Björn Alling,
Per Eklund
Abstract:
We report the results of a combined experimental and theoretical study on nonstoichiometric CrN1+d thin films grown by reactive magnetron sputtering on c-plane sapphire, MgO (100) and LaAlO3 (100) substrates in a Ar/N2 gas mixture using different percentage of N2. There is a transition from n-type to p-type behavior in the layers as a function of nitrogen concentration varying from 48 at. % to 52…
▽ More
We report the results of a combined experimental and theoretical study on nonstoichiometric CrN1+d thin films grown by reactive magnetron sputtering on c-plane sapphire, MgO (100) and LaAlO3 (100) substrates in a Ar/N2 gas mixture using different percentage of N2. There is a transition from n-type to p-type behavior in the layers as a function of nitrogen concentration varying from 48 at. % to 52 at. % in CrN films. The compositional change follows a similar trend for all substrates, with a N/Cr ratio increasing from approximately 0.7 to 1.06-1.10 by increasing percentage of N2 in the gas flow ratio. As a result of the change in stoichiometry, the lattice parameter and the Seebeck coefficient increase together with the increase of N in CrN1+d; in particular, the Seebeck value coefficient transitions from -50 uV.K-1 for CrN0.97 to +75 uV.K-1 for CrN1.1. Density functional theory calculations show that Cr vacancies can account for the change in Seebeck coefficient, since they push the Fermi level down in the valence band, whereas N interstitial defects in the form of N2 dumbbells are needed to explain the increasing lattice parameter. Calculations including both types of defects, which have a strong tendency to bind together, reveal a slight increase in the lattice parameter and a simultaneous formation of holes in the valence band. To explain the experimental trends, we argue that both Cr vacancies and N2 dumbbells, possibly in combined configurations, are present in the films. We demonstrate the possibility of controlling the semiconducting behavior of CrN with intrinsic defects from n- to p-type, opening possibilities to integrate this compound in energy-harvesting thermoelectric devices.
△ Less
Submitted 21 February, 2022; v1 submitted 15 November, 2021;
originally announced November 2021.
-
Solid-state Janus nanoprecipitation enables amorphous-like heat conduction in crystalline Mg3Sb2-based thermoelectric materials
Authors:
Rui Shu,
Zhijia Han,
Anna Elsukova,
Yongbin Zhu,
Peng Qin,
Feng Jiang,
Jun Lu,
Per O. Å. Persson,
Justinas Palisaitis,
Arnaud le Febvrier,
Wenqing Zhang,
Oana Cojocaru-Mirédin,
Yuan Yu,
Per Eklund,
Weishu Liu
Abstract:
Solid-state precipitation can be used to tailor materials properties, ranging from ferromagnets and catalysts to mechanical strengthening and energy storage. Thermoelectric properties can be modified by precipitation to enhance phonon scattering while retaining charge-carrier transmission. Here, we uncover unconventional dual Janus-type nanoprecipitates in Mg3Sb1.5Bi0.5 formed by side-by-side Bi-…
▽ More
Solid-state precipitation can be used to tailor materials properties, ranging from ferromagnets and catalysts to mechanical strengthening and energy storage. Thermoelectric properties can be modified by precipitation to enhance phonon scattering while retaining charge-carrier transmission. Here, we uncover unconventional dual Janus-type nanoprecipitates in Mg3Sb1.5Bi0.5 formed by side-by-side Bi- and Ge-rich appendages, in contrast to separate nanoprecipitate formation. These Janus nanoprecipitates result from local co-melting of Bi and Ge during sintering, enabling an amorphous-like lattice thermal conductivity. A precipitate size effect on phonon scattering is observed due to the balance between alloy-disorder and nanoprecipitate scattering. The thermoelectric figure-of-merit ZT reaches 0.6 near room temperature and 1.6 at 773 K. The Janus nanoprecipitation can be introduced into other materials and may act as a general property-tailoring mechanism.
△ Less
Submitted 30 June, 2022; v1 submitted 20 July, 2021;
originally announced July 2021.
-
An upgraded ultra-high vacuum magnetron-sputtering system for high-versatility and software-controlled deposition
Authors:
Arnaud le Febvrier,
Ludvig Landalv,
Thomas Liersch,
David Sandmark,
Per Sandstrom,
Per Eklund
Abstract:
Magnetron sputtering is a widely used physical vapor deposition technique. Reactive sputtering is used for the deposition of, e.g, oxides, nitrides and carbides. In fundamental research, versatility is essential when designing or upgrading a deposition chamber. Furthermore, automated deposition systems are the norm in industrial production, but relatively uncommon in laboratory-scale systems used…
▽ More
Magnetron sputtering is a widely used physical vapor deposition technique. Reactive sputtering is used for the deposition of, e.g, oxides, nitrides and carbides. In fundamental research, versatility is essential when designing or upgrading a deposition chamber. Furthermore, automated deposition systems are the norm in industrial production, but relatively uncommon in laboratory-scale systems used primarily for fundamental research. Combining automatization and computerized control with the required versatility for fundamental research constitutes a challenge in designing, develo**, and upgrading laboratory deposition systems. The present article provides a detailed description of the design of a lab-scale deposition chamber for magnetron sputtering used for the deposition of metallic, oxide, nitride and oxynitride films with automated controls, dc or pulsed bias, and combined with a coil to enhance the plasma density near the substrate. LabVIEW software (provided as Supplementary Information) has been developed for a high degree of computerized or automated control of hardware and processes control and logging of process details.
△ Less
Submitted 27 January, 2021; v1 submitted 16 October, 2020;
originally announced October 2020.
-
Effect of impurities on morphology and growth mode of (111) and (001) epitaxial-like ScN films
Authors:
Arnaud le Febvrier,
Nina Tureson,
Nina Stilkerich,
Grzegorz Greczynski,
Per Eklund
Abstract:
ScN material is an emerging semiconductor with an indirect bandgap. It has attracted attention for its thermoelectric properties, use as seed layers, and for alloys for piezoelectric application. ScN or other transition metal nitride semiconductors used for their interesting electrical properties are sensitive to contaminants, such as oxygen or fluorine. In this present article, the influence of d…
▽ More
ScN material is an emerging semiconductor with an indirect bandgap. It has attracted attention for its thermoelectric properties, use as seed layers, and for alloys for piezoelectric application. ScN or other transition metal nitride semiconductors used for their interesting electrical properties are sensitive to contaminants, such as oxygen or fluorine. In this present article, the influence of depositions conditions on the amount of oxygen contaminants incorporated in ScN films were investigated and their effects on the electrical properties (electrical resistivity and Seebeck coefficient) were studied. The epitaxial-like films of thickness 125 +-5 nm to 155 +-5 nm were deposited by D.C.-magnetron sputtering on c-plane Al2O3, MgO(111) and r-plane Al2O3 at a substrate temperature ranging from 700 to 950 degree C. The amount of oxygen contaminants presents in the film, dissolved into ScN or as an oxide, was related to the adatom mobility during growth, which is affected by the deposition temperature and the presence of twin domain growth. The lowest values of electrical resistivity of 50 micro-ohm cm were obtained on ScN(111)/MgO(111) and on ScN(001)/r-plane Al2O3 grown at 950 degree C with no twin domains and the lowest amount of oxygen contaminant. At the best, the films exhibited an electrical resistivity of 50 micro-ohm cm with Seebeck coefficient values maintained at -40 microV K-1, thus a power factor estimated at 3.2 10-3 W m-1 K-2 (at room temperature).
△ Less
Submitted 5 October, 2018;
originally announced October 2018.
-
Effect of ion-implantation-induced defects and Mg dopants on thermoelectric properties of ScN
Authors:
Nina Tureson,
Marc Marteau,
Thierry Cabioch,
Ngo Van Nong,
Jens Jensen,
Jun Lu,
Grzegorz Greczynski,
Daniele Fournier,
Niraj Singh,
Ajay Soni,
Laurent Belliard,
Per Eklund,
Arnaud le Febvrier
Abstract:
For applications in energy harvesting, environmentally friendly cooling, and as power sources in remote or portable applications, it is desired to enhance the efficiency of thermoelectric materials. One strategy consists of reducing the thermal conductivity while increasing or retaining the thermoelectric power factor. An approach to achieve this is do** to enhance the Seebeck coefficient and el…
▽ More
For applications in energy harvesting, environmentally friendly cooling, and as power sources in remote or portable applications, it is desired to enhance the efficiency of thermoelectric materials. One strategy consists of reducing the thermal conductivity while increasing or retaining the thermoelectric power factor. An approach to achieve this is do** to enhance the Seebeck coefficient and electrical conductivity, while simultaneously introducing defects in the materials to increase phonon scattering. Here, we use Mg ion implantation to induce defects in epitaxial ScN (111) films. The films were implanted with Mg+ ions with different concentration profiles along the thickness of the film, incorporating 0.35 to 2.2 at.% of Mg in ScN. Implantation at high temperature (600 C), with few defects due to the temperature, does not substantially affect the thermal conductivity compared to a reference ScN. Samples implanted at room temperature, in contrast, exhibited a reduction of the thermal conductivity by a factor of three. The sample doped with 2.2 at.% Mg also showed an increased power factor after implantation. This study thus shows the effect of ion-induced defects on thermal conductivity of ScN films. High-temperature implantation allows the defects to be annealed out during implantation, while the defects are retained for room-temperature implanted samples, allowing for a drastic reduction in thermal conductivity.
△ Less
Submitted 24 September, 2018;
originally announced September 2018.