Showing 1–50 of 59 results for author: Favero, I

Efficient optical coupling to gallium arsenide nano-waveguides and resonators with etched conical fibers

Authors: Samuel Pautrel, Florent Malabat, Louis Waquier, Martin Colombano, Martina Morassi, Aristide Lemaître, Ivan Favero

Abstract: We explore new methods for coupling light to on-chip gallium arsenide nanophotonic structures using etched conical optical fibers. With a single-sided conical fiber taper, we demonstrate efficient coupling to an on-chip photonic bus waveguide in a liquid environment. We then show that it is possible to replace such on-chip bus waveguide by two joined conical fibers in order to directly couple ligh… ▽ More We explore new methods for coupling light to on-chip gallium arsenide nanophotonic structures using etched conical optical fibers. With a single-sided conical fiber taper, we demonstrate efficient coupling to an on-chip photonic bus waveguide in a liquid environment. We then show that it is possible to replace such on-chip bus waveguide by two joined conical fibers in order to directly couple light into a target whispering gallery disk resonator. This latter approach proves compliant with demanding environments, such as a vibrating pulse tube cryostat operating at low temperature, and it is demonstrated both in the telecom band and in the near infrared close to 900 nm of wavelength. The versatility, stability, and high coupling efficiency of this method are promising for quantum optics and sensing experiments in constrained environments, where obtaining high signal-to-noise ratio remains a challenge. △ Less

Submitted 19 October, 2023; originally announced October 2023.

Fluid-structure model for disks vibrating at ultra-high frequency in a compressible viscous fluid

Authors: Hamidreza Neshasteh, Marco Ravaro, Ivan Favero

Abstract: Radial mechanical modes of miniature disk-shaped resonators are promising candidates for probing the ultra-high-frequency rheological properties of liquids. However, the lack of an analytical fluid-structure model hinders the inference of liquid properties from the experimental measurement of such radial vibrations. Here we develop analytical models for the case of a disk vibrating in a compressib… ▽ More Radial mechanical modes of miniature disk-shaped resonators are promising candidates for probing the ultra-high-frequency rheological properties of liquids. However, the lack of an analytical fluid-structure model hinders the inference of liquid properties from the experimental measurement of such radial vibrations. Here we develop analytical models for the case of a disk vibrating in a compressible viscous liquid. Closed-form expressions for the mechanical quality factor and resonant frequency shift upon immersion are obtained, which we compare to the results of numerical modeling for a few significant cases. At frequencies above 1 GHz, our model points out the significance of compressibility effects. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Journal ref: Physics of Fluids 35, 052008 (2023)

Whispering gallery quantum well exciton polaritons in an Indium Gallium Arsenide microdisk cavity

Authors: Romain de Oliveira, Martin Colombano, Florent Malabat, Martina Morassi, Aristide Lemaître, Ivan Favero

Abstract: Despite appealing high-symmetry properties that enable high quality factor and strong confinement, whispering gallery modes of spherical and circular resonators have been absent from the field of quantum-well exciton polaritons. Here we observe whispering gallery exciton polaritons in a Gallium Arsenide microdisk cavity filled with Indium Gallium Arsenide quantum wells, the testbed materials of po… ▽ More Despite appealing high-symmetry properties that enable high quality factor and strong confinement, whispering gallery modes of spherical and circular resonators have been absent from the field of quantum-well exciton polaritons. Here we observe whispering gallery exciton polaritons in a Gallium Arsenide microdisk cavity filled with Indium Gallium Arsenide quantum wells, the testbed materials of polaritonics. Strong coupling is evidenced in photoluminescence and resonant spectroscopy, accessed through concomitant confocal microscopy and near-field optical techniques. Excitonic and optical resonances are tuned by varying temperature and disk radius, revealing Rabi splittings between 5 and 10 meV. A dedicated analytical quantum model for such circular polaritons is developed, which reproduces the measured values. At high power, lasing is observed and accompanied by a blueshift of the emission that points to the regime of polariton lasing. △ Less

Submitted 22 September, 2023; originally announced September 2023.

Optomechanical measurement of single nanodroplet evaporation with millisecond time-resolution

Authors: Samantha Sbarra, Louis Waquier, Stephan Suffit, Aristide Lemaître, Ivan Favero

Abstract: Tracking the evolution of an individual nanodroplet of liquid in real-time remains an outstanding challenge. Here a miniature optomechanical resonator detects a single nanodroplet landing on a surface and measures its subsequent evaporation down to a volume of twenty attoliters. The ultra-high mechanical frequency and sensitivity of the device enable a time resolution below the millisecond, suffic… ▽ More Tracking the evolution of an individual nanodroplet of liquid in real-time remains an outstanding challenge. Here a miniature optomechanical resonator detects a single nanodroplet landing on a surface and measures its subsequent evaporation down to a volume of twenty attoliters. The ultra-high mechanical frequency and sensitivity of the device enable a time resolution below the millisecond, sufficient to resolve the fast evaporation dynamics under ambient conditions. Using the device dual optical and mechanical capability, we determine the evaporation in the first ten milliseconds to occur at constant contact radius with a dynamics ruled by the mere Kelvin effect, producing evaporation despite a saturated surrounding gas. Over the following hundred of milliseconds, the droplet further shrinks while being accompanied by the spreading of an underlying puddle. In the final steady-state after evaporation, an extended thin liquid film is stabilized on the surface. Our optomechanical technique opens the unique possibility of monitoring all these stages in real-time. △ Less

Submitted 12 May, 2022; originally announced May 2022.

Enhanced Cavity Optomechanics with Quantum-well Exciton Polaritons

Authors: Nicola Carlon Zambon, Zakari Denis, Romain De Oliveira, Sylvain Ravets, Cristiano Ciuti, Ivan Favero, Jacqueline Bloch

Abstract: Semiconductor microresonators embedding quantum wells can host tightly confined and mutually interacting excitonic, optical and mechanical modes at once. We theoretically investigate the case where the system operates in the strong exciton-photon coupling regime, while the optical and excitonic resonances are parametrically modulated by the interaction with a mechanical mode. Owing to the large ex… ▽ More Semiconductor microresonators embedding quantum wells can host tightly confined and mutually interacting excitonic, optical and mechanical modes at once. We theoretically investigate the case where the system operates in the strong exciton-photon coupling regime, while the optical and excitonic resonances are parametrically modulated by the interaction with a mechanical mode. Owing to the large exciton-phonon coupling at play in semiconductors, we predict an enhancement of polariton-phonon interactions by two orders of magnitude with respect to mere optomechanical coupling: a near-unity single-polariton quantum cooperativity is within reach for current semiconductor resonator platforms. We further analyze how polariton nonlinearities affect dynamical back-action, modifying the capability to cool or amplify the mechanical motion. △ Less

Submitted 16 September, 2022; v1 submitted 24 February, 2022; originally announced February 2022.

Comments: Final version, as published - 20 pages, 11 figures

Multimode optomechanical weighing of a single nanoparticle

Authors: Samantha Sbarra, Louis Waquier, Stephan Suffit, Aristide Lemaître, Ivan Favero

Abstract: We demonstrate multimode optomechanical sensing of individual nanoparticles with radius of a hundred of nanometers. A semiconductor optomechanical disk resonator is optically driven and detected under ambient conditions, as nebulized nanoparticles land on it. Multiple mechanical and optical resonant signals of the disk are tracked simultaneously, providing access to several physical informations a… ▽ More We demonstrate multimode optomechanical sensing of individual nanoparticles with radius of a hundred of nanometers. A semiconductor optomechanical disk resonator is optically driven and detected under ambient conditions, as nebulized nanoparticles land on it. Multiple mechanical and optical resonant signals of the disk are tracked simultaneously, providing access to several physical informations about the landing analyte in real-time. Thanks to a fast camera registering the time and position of landing, these signals can be employed to weigh each nanoparticle with precision. Sources of error and deviation are discussed and modeled, indicating a path to evaluate the elasticity of the nanoparticles on top of their mere mass. The device is optimized for future investigation of biological particles in the high megadalton range, such as large viruses. △ Less

Submitted 4 March, 2024; v1 submitted 19 November, 2021; originally announced November 2021.

Photonic kernel machine learning for ultrafast spectral analysis

Authors: Zakari Denis, Ivan Favero, Cristiano Ciuti

Abstract: We introduce photonic kernel machines, a scheme for ultrafast spectral analysis of noisy radio-frequency signals from single-shot optical intensity measurements. The approach combines the versatility of machine learning and the speed of photonic hardware to reach unprecedented throughput rates. We theoretically describe some of the key underlying principles, and then numerically illustrate the rea… ▽ More We introduce photonic kernel machines, a scheme for ultrafast spectral analysis of noisy radio-frequency signals from single-shot optical intensity measurements. The approach combines the versatility of machine learning and the speed of photonic hardware to reach unprecedented throughput rates. We theoretically describe some of the key underlying principles, and then numerically illustrate the reached performances on a photonic lattice-based implementation. We apply the technique both to picosecond pulsed radio-frequency signals, on energy-spectral-density estimation and a shape classification task, and to continuous signals, on a frequency tracking task. The presented optical computing scheme is resilient to noise while requiring minimal control on the photonic-lattice parameters, making it readily implementable in realistic state-of-the-art photonic platforms. △ Less

Submitted 25 February, 2022; v1 submitted 28 October, 2021; originally announced October 2021.

Comments: 19 pages, 11 figures. Final version accepted in PRApplied

Journal ref: Phys. Rev. Applied 17 (2022) 034077

Very high frequency probes for atomic force microscopy with silicon optomechanics

Authors: L Schwab, P Allain, N Mauran, X Dollat, L Mazenq, D Lagrange, M Gély, S Hentz, G Jourdan, I Favero, B Legrand

Abstract: Atomic force microscopy (AFM) has been constantly supporting nanosciences and nanotechnologies for over 30 years, being present in many fields from condensed matter physics to biology. It enables measuring very weak forces at the nanoscale, thus elucidating interactions at play in fundamental processes. Here we leverage the combined benefits of micro/nanoelectromechanical systems and cavity optome… ▽ More Atomic force microscopy (AFM) has been constantly supporting nanosciences and nanotechnologies for over 30 years, being present in many fields from condensed matter physics to biology. It enables measuring very weak forces at the nanoscale, thus elucidating interactions at play in fundamental processes. Here we leverage the combined benefits of micro/nanoelectromechanical systems and cavity optomechanics to fabricate a sensor for dynamic mode AFM at a frequency above 100 MHz. This is two decades above the fastest commercial AFM probes, suggesting opportunity for measuring forces at timescales unexplored so far. The fabrication is achieved using very-large scale integration technologies inherited from photonic silicon circuits. The probe's ring optomechanical cavity is coupled to a 1.55 um laser light and features a 130 MHz mechanical resonance mode with a quality factor of 900 in air. A limit of detection in displacement of 3.10-16 m/sqrt(Hz) is obtained, enabling the detection of the Brownian motion of the probe and paving the way for force sensing experiments in the dynamic mode with a working vibration amplitude in the picometer range. Inserted in a custom AFM instrument embodiment, this optomechanical sensor demonstrates the capacity to perform force-distance measurements and to maintain a constant interaction strength between tip and sample, an essential requirement for AFM applications. Experiments show indeed a stable closed-loop operation with a setpoint of 4 nN/nm for an unprecedented sub-picometer vibration amplitude, where the tip-sample interaction is mediated by a stretched water meniscus. △ Less

Submitted 27 August, 2021; originally announced September 2021.

Real-time sensing with multiplexed optomechanical resonators

Authors: Fabrice Lamberti, Ujwol Palanchoke, Thijs Geurts, Marc Gely, Sebastien Regord, Louise Banniard, Marc Sansa, Ivan Favero, Guillaume Jourdan, Sebastien Hentz

Abstract: Nanoelectromechanical resonators have been successfully used for a variety of sensing applications. Their extreme resolution comes from their small size at the cost of low capture area, making the "needle in a haystack" issue acute. This leads to poor instrument sensitivity and long analysis time. Moreover, electrical transductions are limited in frequency, which limits the achievable mechanical b… ▽ More Nanoelectromechanical resonators have been successfully used for a variety of sensing applications. Their extreme resolution comes from their small size at the cost of low capture area, making the "needle in a haystack" issue acute. This leads to poor instrument sensitivity and long analysis time. Moreover, electrical transductions are limited in frequency, which limits the achievable mechanical bandwidth again limiting throughput. Multiplexing a large number of high-frequency resonators appears as a solution, but this is complex with electrical transductions. We propose here a route to solve these issues, with a multiplexing scheme for very high frequency optomechanical resonators. We demonstrate the simultaneous frequency measurement of three silicon microdisks resonators fabricated through a Very Large Scale Integration process. The readout architecture is simple and does not degrade the sensing resolutions. This paves the way towards the realization of sensors for multi-parametric analysis, extremely low limit of detection and response time. △ Less

Submitted 9 July, 2021; originally announced July 2021.

Effective bath model for arrays of coupled non-Hermitian nanoresonators

Authors: Vincent Vinel, Zejian Li, Adrien Borne, Adrien Bensemhoun, Ivan Favero, Cristiano Ciuti, Giuseppe Leo

Abstract: Nanophotonics systems have recently been studied under the perspective of non-Hermitian physics. Given their potential for wavefront control, nonlinear optics and quantum optics, it is crucial to develop predictive tools to assist their design. We present here a simple model relying on the coupling to an effective bath consisting of a continuum of modes to describe systems of coupled resonators, a… ▽ More Nanophotonics systems have recently been studied under the perspective of non-Hermitian physics. Given their potential for wavefront control, nonlinear optics and quantum optics, it is crucial to develop predictive tools to assist their design. We present here a simple model relying on the coupling to an effective bath consisting of a continuum of modes to describe systems of coupled resonators, and test it on dielectric nanocylinder chains accessible to experiments. The effective coupling constants, which depend non-trivially on the distance between resonators, are extracted from numerical simulations in the case of just two coupled elements. The model predicts successfully the dispersive and reactive nature of modes for configurations with multiple resonators, as validated by numerical solutions. It can be applied to larger systems, which are hardly solvable with finite-element approaches. △ Less

Submitted 5 October, 2021; v1 submitted 8 April, 2021; originally announced April 2021.

Comments: 5 pages, 3 figures, published in Optics Express

Journal ref: Optics Express Vol. 29, Issue 21, pp. 34015-34023 (2021)

A multiphysics model for high frequency optomechanical sensors optically actuated and detected in the oscillating mode

Authors: Samantha Sbarra, Pierre Etienne Allain, Aristide Lemaître, Ivan Favero

Abstract: Optomechanical systems combine extreme sensitivity and bandwidth in the control of mechanical motion, of interest for various applications. Integrated on a chip, actuated and detected all-optically by a single laser, they could disrupt sensing technologies. We introduce here a multiphysics model that describes their operation in the oscillating mode, under sinusoidal modulation of the laser, when… ▽ More Optomechanical systems combine extreme sensitivity and bandwidth in the control of mechanical motion, of interest for various applications. Integrated on a chip, actuated and detected all-optically by a single laser, they could disrupt sensing technologies. We introduce here a multiphysics model that describes their operation in the oscillating mode, under sinusoidal modulation of the laser, when both photothermal forces and radiation pressure are present, and when nonlinear absorption occurs in the device. The model is validated by systematic experiments on ultra-high frequency optomechanical disk resonators and leads to a quantitative assessment of the amplitude and phase of the demodulated output signal, which carries the sensing information. △ Less

Submitted 17 March, 2021; originally announced March 2021.

An optomechanical discrete variable quantum teleportation scheme

Authors: Samuel Pautrel, Zakari Denis, Jérémy Bon, Adrien Borne, Ivan Favero

Abstract: We propose an experimental protocol to realize discrete variable quantum teleportation using optomechanical devices. The photonic polarization superposition state of a single photon is teleported to a phononic superposition of two micromechanical oscillators by means of photon/phonon entanglement generation and optical Bell state measurement using two-photon interference. Verification of the proto… ▽ More We propose an experimental protocol to realize discrete variable quantum teleportation using optomechanical devices. The photonic polarization superposition state of a single photon is teleported to a phononic superposition of two micromechanical oscillators by means of photon/phonon entanglement generation and optical Bell state measurement using two-photon interference. Verification of the protocol is performed by coherent state transfer between the mechanical devices and light. Simulations show the feasibility of the proposed scheme at millikelvin temperatures using state-of-the-art gigahertz optomechanical devices. △ Less

Submitted 8 May, 2020; originally announced May 2020.

Comments: 11pages, 5 figures

Optomechanical mass spectrometry

Authors: Marc Sansa, Martial Defoort, Ariel Brenac, Maxime Hermouet, Louise Banniard, Alexandre Fafin, Marc Gely, Christophe Masselon, Ivan Favero, Guillaume Jourdan, Sébastien Hentz

Abstract: It has been demonstrated in the recent years that nanomechanical mass spectrometry was well suited for the analysis of specific high mass species such as viruses. Still, the exclusive use of one-dimensional devices such as vibrating beams forces a trade-off between analysis time (related to capture area) and mass resolution (inversely proportional to device mass). Such devices also require complex… ▽ More It has been demonstrated in the recent years that nanomechanical mass spectrometry was well suited for the analysis of specific high mass species such as viruses. Still, the exclusive use of one-dimensional devices such as vibrating beams forces a trade-off between analysis time (related to capture area) and mass resolution (inversely proportional to device mass). Such devices also require complex readout schemes to simultaneously monitor multiple resonance modes, in particular when stiffness or shape come into play, which degrades mass resolution. These issues restrict nanomechanical MS to the analysis of species with specific properties. We report here the first demonstration of single-particle mass spectrometry with nano-optomechanical resonators fabricated with a Very Large Scale Integration process. The unique motion sensitivity of optomechanical techniques allows the use of resonators with new topologies. The device introduced here is designed to be impervious to particle position, stiffness or shape, opening the way to the analysis of large aspect ratio biological objects of great significance such as viruses with a tail or fibrils. Compared to top-down beam resonators with electrical read-out and state-of-the-art mass resolution, we show a three-fold improvement in capture area with no resolution degradation, despite the use of a single resonance mode. Short analysis time is in reach thanks to the sensitivity and bandwidth of optomechanical read-out and its compliance with telecom multiplexing techniques. △ Less

Submitted 14 April, 2020; originally announced April 2020.

Permanent Directional Heat Currents in Lattices of Optomechanical Resonators

Authors: Zakari Denis, Alberto Biella, Ivan Favero, Cristiano Ciuti

Abstract: We study the phonon dynamics in lattices of optomechanical resonators where the mutually coupled photonic modes are coherently driven and the mechanical resonators are uncoupled and connected to independent thermal baths. We present a general procedure to obtain the effective Lindblad dynamics of the phononic modes for an arbitrary lattice geometry, where the light modes play the role of an effect… ▽ More We study the phonon dynamics in lattices of optomechanical resonators where the mutually coupled photonic modes are coherently driven and the mechanical resonators are uncoupled and connected to independent thermal baths. We present a general procedure to obtain the effective Lindblad dynamics of the phononic modes for an arbitrary lattice geometry, where the light modes play the role of an effective reservoir that mediates the phonon nonequilibrium dynamics. We show how to stabilize stationary states exhibiting directional heat currents over arbitrary distance, despite the absence of thermal gradient and of direct coupling between the mechanical resonators. △ Less

Submitted 4 February, 2020; v1 submitted 22 October, 2019; originally announced October 2019.

Comments: Final version accepted in PRL

Journal ref: Phys. Rev. Lett. 124, 083601 (2020)

Brillouin Scattering in Hybrid Optophononic Bragg Micropillar Resonators at 300 GHz

Authors: M. Esmann, F. R. Lamberti, A. Harouri, L. Lanco, I. Sagnes, I. Favero, G. Aubin, C. Gomez-Carbonell, A. Lemaitre, O. Krebs, P. Senellart, N. D. Lanzillotti-Kimura

Abstract: We introduce a monolithic Brillouin generator based on a semiconductor micropillar cavity embedding a high frequency nanoacoustic resonator operating in the hundreds of GHz range. The concept of two nested resonators allows an independent design of the ultrahigh frequency Brillouin spectrum and of the optical device. We develop an optical free-space technique to characterize spontaneous Brillouin… ▽ More We introduce a monolithic Brillouin generator based on a semiconductor micropillar cavity embedding a high frequency nanoacoustic resonator operating in the hundreds of GHz range. The concept of two nested resonators allows an independent design of the ultrahigh frequency Brillouin spectrum and of the optical device. We develop an optical free-space technique to characterize spontaneous Brillouin scattering in this monolithic device and propose a measurement protocol that maximizes the Brillouin generation efficiency in the presence of optically induced thermal effects. The compact and versatile Brillouin generator studied here could be readily integrated into fibered and on-chip architectures. △ Less

Submitted 12 December, 2018; originally announced December 2018.

Comments: 9 pages, 4 figures

Optomechanical Resonating Probe for Very High Speed Sensing of Atomic Forces

Authors: Pierre Etienne Allain, Lucien Schwab, Colin Misner, Marc Gely, Estelle Mairiaux, Maxime Hermouet, Benjamin Walter, Giuseppe Leo, Sébastien Hentz, Marc Faucher, Guillaume Jourdan, Bernard Legrand, Ivan Favero

Abstract: Atomic force spectroscopy and microscopy (AFM) are invaluable tools to characterize nanostructures and biological systems. Most experiments, including state-of-the-art images of molecular bonds, are achieved by driving probes at their mechanical resonance. This resonance reaches the MHz for the fastest AFM micro-cantilevers, with typical motion amplitude of a few nanometres. Next-generation invest… ▽ More Atomic force spectroscopy and microscopy (AFM) are invaluable tools to characterize nanostructures and biological systems. Most experiments, including state-of-the-art images of molecular bonds, are achieved by driving probes at their mechanical resonance. This resonance reaches the MHz for the fastest AFM micro-cantilevers, with typical motion amplitude of a few nanometres. Next-generation investigations of molecular scale dynamics, including faster force imaging and higher-resolution spectroscopy of dissipative interactions, require more bandwidth and vibration amplitudes below interatomic distance, for non-perturbative short-range tip-matter interactions. Probe frequency is a key parameter to improve bandwidth while reducing Brownian motion, allowing large signal-to-noise for exquisite resolution. Optomechanical resonators reach motion detection at 10^(-18) m.(Hz)^(-1/2), while coupling light to bulk vibration modes whose frequencies largely surpass those of cantilevers. Here we introduce an optically operated resonating optomechanical atomic force probe of frequency 2 decades above the fastest functional AFM cantilevers while Brownian motion is 4 orders below. Based on a Silicon-On-Insulator technology, the probe demonstrates high-speed sensing of contact and non-contact interactions with sub-picometre driven motion, breaking open current locks for faster and finer atomic force spectroscopy. △ Less

Submitted 15 October, 2018; originally announced October 2018.

Topological nanophononic states by band inversion

Authors: Martin Esmann, Fabrice Roland Lamberti, Pascale Senellart, Ivan Favero, Olivier Krebs, Loic Lanco, Carmen Gomez Carbonell, Aristide Lemaitre, Norberto Daniel Lanzillotti-Kimura

Abstract: Nanophononics is essential for the engineering of thermal transport in nanostructured electronic devices, it greatly facilitates the manipulation of mechanical resonators in the quantum regime, and could unveil a new route in quantum communications using phonons as carriers of information. Acoustic phonons also constitute a versatile platform for the study of fundamental wave dynamics, including B… ▽ More Nanophononics is essential for the engineering of thermal transport in nanostructured electronic devices, it greatly facilitates the manipulation of mechanical resonators in the quantum regime, and could unveil a new route in quantum communications using phonons as carriers of information. Acoustic phonons also constitute a versatile platform for the study of fundamental wave dynamics, including Bloch oscillations, Wannier Stark ladders and other localization phenomena. Many of the phenomena studied in nanophononics were indeed inspired by their counterparts in optics and electronics. In these fields, the consideration of topological invariants to control wave dynamics has already had a great impact for the generation of robust confined states. Interestingly, the use of topological phases to engineer nanophononic devices remains an unexplored and promising field. Conversely, the use of acoustic phonons could constitute a rich platform to study topological states. Here, we introduce the concept of topological invariants to nanophononics and experimentally implement a nanophononic system supporting a robust topological interface state at 350 GHz. The state is constructed through band inversion, i.e. by concatenating two semiconductor superlattices with inverted spatial mode symmetries. The existence of this state is purely determined by the Zak phases of the constituent superlattices, i.e. that one-dimensional Berry phase. We experimentally evidenced the mode through Raman spectroscopy. The reported robust topological interface states could become part of nanophononic devices requiring resonant structures such as sensors or phonon lasers. △ Less

Submitted 24 February, 2018; originally announced February 2018.

Comments: 21 pages, 7 figures

Journal ref: Phys. Rev. B 97, 155422 (2018)

Microscopic nanomechanical dissipation in gallium arsenide resonators

Authors: Mehdi Hamoumi, Pierre Etienne Allain, William Hease, Laurence Morgenroth, Bruno Gérard, Aristide Lemaître, Giuseppe Leo, Ivan Favero

Abstract: We report on a systematic study of nanomechanical dissipation in high-frequency (approximatively 300 MHz) gallium arsenide optomechanical disk resonators, in conditions where clam** and fluidic losses are negligible. Phonon-phonon interactions are shown to contribute with a loss background fading away at cryogenic temperatures (3 K). Atomic layer deposition of alumina at the surface modifies the… ▽ More We report on a systematic study of nanomechanical dissipation in high-frequency (approximatively 300 MHz) gallium arsenide optomechanical disk resonators, in conditions where clam** and fluidic losses are negligible. Phonon-phonon interactions are shown to contribute with a loss background fading away at cryogenic temperatures (3 K). Atomic layer deposition of alumina at the surface modifies the quality factor of resonators, pointing towards the importance of surface dissipation. The temperature evolution is accurately fitted by two-level systems models, showing that nanomechanical dissipation in gallium arsenide resonators directly connects to their microscopic properties. Two-level systems, notably at surfaces, appear to rule the dam** and fluctuations of such high-quality crystalline nanomechanical devices, at all temperatures from 3 to 300K. △ Less

Submitted 27 January, 2018; originally announced January 2018.

Journal ref: Phys. Rev. Lett. 120, 223601 (2018)

On-chip III-V monolithic integration of heralded single photon sources and beamsplitters

Authors: J. Belhassen, F. Baboux, Q. Yao, M. Amanti, I. Favero, A. Lemaître, S. W. Kolthammer, I. A. Walmsley, S. Ducci

Abstract: We demonstrate a monolithic III-V photonic circuit combining a heralded single photon source with a beamsplitter, at room temperature and telecom wavelength. Pulsed parametric down-conversion in an AlGaAs waveguide generates counterpropagating photons, one of which is used to herald the injection of its twin into the beamsplitter. We use this configuration to implement an integrated Hanbury-Brown… ▽ More We demonstrate a monolithic III-V photonic circuit combining a heralded single photon source with a beamsplitter, at room temperature and telecom wavelength. Pulsed parametric down-conversion in an AlGaAs waveguide generates counterpropagating photons, one of which is used to herald the injection of its twin into the beamsplitter. We use this configuration to implement an integrated Hanbury-Brown and Twiss experiment, yielding a heralded second-order correlation $g^{(2)}_{\rm her}(0)=0.10 \pm 0.02$ that confirms single-photon operation. The demonstrated generation and manipulation of quantum states on a single III-V semiconductor chip opens promising avenues towards real-world applications in quantum information. △ Less

Submitted 19 April, 2018; v1 submitted 24 October, 2017; originally announced October 2017.

Journal ref: Appl. Phys. Lett. 112, 071105 (2018)

High frequency optomechanical disk resonators in III-V ternary semiconductors

Authors: Biswarup Guha, Silvia Mariani, Aristide Lemaître, Sylvain Combrié, Giuseppe Leo, Ivan Favero

Abstract: Optomechanical systems based on nanophotonics are advancing the field of precision motion measurement, quantum control and nanomechanical sensing. In this context III-V semiconductors offer original assets like the heteroepitaxial growth of optimized metamaterials for photon/phonon interactions. GaAs has already demonstrated high performances in optomechanics but suffers from two photon absorption… ▽ More Optomechanical systems based on nanophotonics are advancing the field of precision motion measurement, quantum control and nanomechanical sensing. In this context III-V semiconductors offer original assets like the heteroepitaxial growth of optimized metamaterials for photon/phonon interactions. GaAs has already demonstrated high performances in optomechanics but suffers from two photon absorption (TPA) at the telecom wavelength, which can limit the cooperativity. Here, we investigate TPA-free III-V semiconductor materials for optomechanics applications: GaAs lattice-matched In0:5Ga0:5P and Al0:4Ga0:6As. We report on the fabrication and optical characterization of high frequency (500-700 MHz) optomechanical disks made out of these two materials, demonstrating high optical and mechanical Q in ambient conditions. Finally we achieve operating these new devices as laser-sustained optomechanical self-oscillators, and draw a first comparative study with existing GaAs systems. △ Less

Submitted 2 October, 2017; originally announced October 2017.

Comments: Optics Express, 2017

Nanomechanical resonators based on adiabatic periodicity-breaking in a superlattice

Authors: F. R. Lamberti, M. Esmann, A. Lemaitre, C. Gomez Carbonell, O. Krebs, I. Favero, B. Jusserand, P. Senellart, L. Lanco, N. D. Lanzillotti-Kimura

Abstract: We propose a novel acoustic cavity design where we confine a mechanical mode by adiabatically changing the acoustic properties of a GaAs/AlAs superlattice. By means of high resolution Raman scattering measurements, we experimentally demonstrate the presence of a confined acoustic mode at a resonance frequency around 350 GHz. We observe an excellent agreement between the experimental data and numer… ▽ More We propose a novel acoustic cavity design where we confine a mechanical mode by adiabatically changing the acoustic properties of a GaAs/AlAs superlattice. By means of high resolution Raman scattering measurements, we experimentally demonstrate the presence of a confined acoustic mode at a resonance frequency around 350 GHz. We observe an excellent agreement between the experimental data and numerical simulations based on a photoelastic model. We demonstrate that the spatial profile of the confined mode can be tuned by changing the magnitude of the adiabatic deformation, leading to strong variations of its mechanical quality factor and Raman scattering cross section. The reported alternative confinement method could lead to the development of a novel generation of nanophononic and optomechanical systems. △ Less

Submitted 18 August, 2017; originally announced August 2017.

Optomechanical properties of GaAs/AlAs micropillar resonators operating in the 18 GHz range

Authors: F. R. Lamberti, Q. Yao, L. Lanco, D. T. Nguyen, M. Esmann, A. Fainstein, P. Sesin, S. Anguiano, V. Villafañe, A. Bruchhausen, P. Senellart, I. Favero, N. D. Lanzillotti-Kimura

Abstract: Recent experiments demonstrated that GaAs-AlAs based micropillar cavities are promising systems for quantum optomechanics, allowing the simultaneous three-dimensional confinement of near-infrared photons and acoustic phonons in the 18-100 GHz range. Here, we investigate through numerical simulations the optomechanical properties of this new platform. We evidence how the Poisson's ratio and semicon… ▽ More Recent experiments demonstrated that GaAs-AlAs based micropillar cavities are promising systems for quantum optomechanics, allowing the simultaneous three-dimensional confinement of near-infrared photons and acoustic phonons in the 18-100 GHz range. Here, we investigate through numerical simulations the optomechanical properties of this new platform. We evidence how the Poisson's ratio and semiconductor-vacuum boundary conditions lead to very distinct features in the mechanical and optical three dimensional confinement. We find a strong dependence of the mechanical quality factor and strain distribution on the micropillar radius, in great contrast to what is predicted and observed in the optical domain. The derived optomechanical coupling constants g_0 reach ultra-large values in the 10^6 rad/s range. △ Less

Submitted 26 July, 2017; originally announced July 2017.

Time-Resolved Cavity Nano-Optomechanics in the 20-100 GHz range

Authors: S. Anguiano, A. E. Bruchhausen, B. Jusserand, I. Favero, F. R. Lamperti, L. Lanco, I. Sagnes, A. Lemaître, N. D. Lanzillotti-Kimura, P. Senellart, A. Fainstein

Abstract: Applications of cavity optomechanics span from gravitational wave detection to the study of quantum motion states in mesoscopic mechanical systems. The engineering of resonators supporting strongly interacting mechanical and optical modes is central to these developments. However, current technological and experimental approaches limit the accessible mechanical frequencies to a few GHz, imposing h… ▽ More Applications of cavity optomechanics span from gravitational wave detection to the study of quantum motion states in mesoscopic mechanical systems. The engineering of resonators supporting strongly interacting mechanical and optical modes is central to these developments. However, current technological and experimental approaches limit the accessible mechanical frequencies to a few GHz, imposing hard constraints on quantum mechanical studies. Here we demonstrate the optical control of 20-100~GHz mechanical modes confined in the three dimensions within semiconductor nano-optomechanical pillar cavities. We use a time-resolved transient optical reflectivity technique and access both the energy spectrum and dynamics of the mechanical modes at the picosecond timescale. A strong increase of the optomechanical coupling upon reducing the pillar size is observed together with unprecedent room temperature Q-frequency products above $10^{14}$. The measurements also reveal sideband generation in the optomechanical response. Such resonators can naturally integrate quantum wells and quantum dots, enabling novel applications in cavity quantum electrodynamics and high frequency nanomechanics. △ Less

Submitted 13 October, 2016; originally announced October 2016.

Light-mediated cascaded locking of multiple nano-optomechanical oscillators

Authors: Eduardo Gil-Santos, Matthieu Labousse, Christophe Baker, Arthur Goetschy, William Hease, Carmen Gomez, Aristide Lemaître, Giuseppe Leo, Cristiano Ciuti, Ivan Favero

Abstract: Collective phenomena emerging from non-linear interactions between multiple oscillators, such as synchronization and frequency locking, find applications in a wide variety of fields. Optomechanical resonators, which are intrinsically non-linear, combine the scientific assets of mechanical devices with the possibility of long distance controlled interactions enabled by travelling light. Here we dem… ▽ More Collective phenomena emerging from non-linear interactions between multiple oscillators, such as synchronization and frequency locking, find applications in a wide variety of fields. Optomechanical resonators, which are intrinsically non-linear, combine the scientific assets of mechanical devices with the possibility of long distance controlled interactions enabled by travelling light. Here we demonstrate light-mediated frequency locking of three distant nano-optomechanical oscillators positioned in a cascaded configuration. The oscillators, integrated on a chip along a coupling waveguide, are optically driven with a single laser and oscillate at gigahertz frequency. Despite an initial frequency disorder of hundreds of kilohertz, the guided light locks them all with a clear transition in the optical output. The experimental results are described by Langevin equations, paving the way to scalable cascaded optomechanical configurations. △ Less

Submitted 30 September, 2016; originally announced September 2016.

Journal ref: Phys. Rev. Lett. 118, 063605 (2017)

Fully coupled hybrid cavity optomechanics: quantum interferences and correlations

Authors: Juan Restrepo, Ivan Favero, Cristiano Ciuti

Abstract: We present a quantum theory for a fully coupled hybrid optomechanical system where all mutual couplings between a two-level atom, a confined photon mode and a mechanical oscillator mode are considered. In such a configuration, new quantum interference effects and correlations arise due to the interplay and competition between the different physical interactions. We present an analytical diagonaliz… ▽ More We present a quantum theory for a fully coupled hybrid optomechanical system where all mutual couplings between a two-level atom, a confined photon mode and a mechanical oscillator mode are considered. In such a configuration, new quantum interference effects and correlations arise due to the interplay and competition between the different physical interactions. We present an analytical diagonalization of the related fully coupled Hamiltonian, showing the nature and energy spectra of the tripartite dressed excitations. We determine the driven-dissipative dynamics of such hybrid systems and study phonon blockade effects under resonant excitation. We also study the statistical properties of the photon emission obtained under incoherent pum** of the two-level atom, which is particularly relevant for experiments with solid-state two-level emitters. △ Less

Submitted 27 May, 2016; originally announced May 2016.

Comments: 11 pages, 6 figures

Journal ref: Phys. Rev. A 95, 023832 (2017)

Quantum Communication Between Remote Mechanical Resonators

Authors: S. Felicetti, S. Fedortchenko, R. Rossi Jr., S. Ducci, I. Favero, T. Coudreau, P. Milman

Abstract: Mechanical resonators represent one of the most promising candidates to mediate the interaction between different quantum technologies, bridging the gap between efficient quantum computation and long-distance quantum communication. In this letter, we introduce a novel interferometric scheme where the interaction of a mechanical resonator with input/output quantum pulses is controlled by an indepen… ▽ More Mechanical resonators represent one of the most promising candidates to mediate the interaction between different quantum technologies, bridging the gap between efficient quantum computation and long-distance quantum communication. In this letter, we introduce a novel interferometric scheme where the interaction of a mechanical resonator with input/output quantum pulses is controlled by an independent classical drive. We design protocols for state teleportation and direct quantum state transfer, between distant mechanical resonators. The proposed device, feasible with state-of-the-art technology, can serve as building block for the implementation of long-distance quantum networks of mechanical resonators. △ Less

Submitted 26 May, 2016; originally announced May 2016.

Journal ref: Phys. Rev. A 95, 022322 (2017)

Surface-enhanced gallium arsenide photonic resonator with a quality factor of six million

Authors: Biswarup Guha, Felix Marsault, Fabian Cadiz, Laurence Morgenroth, Vladimir Ulin, Vladimir Berkovitz, Aristide Lemaître, Carmen Gomez, Alberto Amo, Sylvian Combrié, Bruno Gérard, Giuseppe Leo, Ivan Favero

Abstract: Gallium Arsenide and related compound semiconductors lie at the heart of optoelectronics and integrated laser technologies. Shaped at the micro and nano-scale, they allow strong interaction with quantum dots and quantum wells, and promise to result in stunning devices. However gallium arsenide optical structures presently exhibit lower performances than their silicon-based counterparts, notably in… ▽ More Gallium Arsenide and related compound semiconductors lie at the heart of optoelectronics and integrated laser technologies. Shaped at the micro and nano-scale, they allow strong interaction with quantum dots and quantum wells, and promise to result in stunning devices. However gallium arsenide optical structures presently exhibit lower performances than their silicon-based counterparts, notably in nanophotonics where the surface plays a chief role. Here we report on advanced surface control of miniature gallium arsenide optical resonators, using two distinct techniques that produce permanent results. One leads to extend the lifetime of free-carriers and enhance luminescence, while the other strongly reduces surface absorption originating from mid-gap states and enables ultra-low optical dissipation devices. With such surface control, the quality factor of wavelength-sized optical disk resonators is observed to rise up to six million at telecom wavelength, greatly surpassing previous realizations and opening new prospects for Gallium Arsenide nanophotonics. △ Less

Submitted 2 May, 2016; originally announced May 2016.

Monolithic AlGaAs second-harmonic nanoantennas

Authors: V. F. Gili, L. Carletti, A. Locatelli, D. Rocco, M. Finazzi, L. Ghirardini, I. Favero, C. Gomez, A. Lemaître, M. Celebrano, C. De Angelis, G. Leo

Abstract: We demonstrate monolithic aluminum gallium arsenide (AlGaAs) optical anoantennas. Using a selective oxidation technique, we fabricate such epitaxial semiconductor nanoparticles on an aluminum oxide substrate. Second harmonic generation from an AlGaAs nanocylinder of height h=400 nm and varying radius pumped with femtosecond pulses delivered at 1554-nm wavelength has been measured, revealing a peak… ▽ More We demonstrate monolithic aluminum gallium arsenide (AlGaAs) optical anoantennas. Using a selective oxidation technique, we fabricate such epitaxial semiconductor nanoparticles on an aluminum oxide substrate. Second harmonic generation from an AlGaAs nanocylinder of height h=400 nm and varying radius pumped with femtosecond pulses delivered at 1554-nm wavelength has been measured, revealing a peak conversion efficiency exceeding 10-5 for nanocylinders with an otpimized geometry. △ Less

Submitted 29 April, 2016; originally announced April 2016.

Journal ref: Opt. Express 24, 15965-15971 (2016)

Optomechanical THz detection with a sub-wavelength resonator

Authors: Cherif Belacel, Yanko Todorov, Stefano Barbieri, Djamal Gacemi, Ivan Favero, Carlo Sirtori

Abstract: The terahertz (THz) spectral domain offers a myriad of applications spanning chemical spectroscopy, medicine, security and imaging[1]. It has also recently become a playground for fundamental studies of light-matter interactions [2-6]. THz science and technology could benefit from optomechanical approaches, which harness the interaction of light with miniature mechanical resonators [7,8]. So far,… ▽ More The terahertz (THz) spectral domain offers a myriad of applications spanning chemical spectroscopy, medicine, security and imaging[1]. It has also recently become a playground for fundamental studies of light-matter interactions [2-6]. THz science and technology could benefit from optomechanical approaches, which harness the interaction of light with miniature mechanical resonators [7,8]. So far, optomechanics has mostly focused on the optical and microwave domains, leading to new types of quantum experiments [9-11] and to the development of optical-microwave converters [12-14]. Here we demonstrate an integrated meta-atom [15] THz resonator with a flexible part acting as a mechanical oscillator. In this device free space THz photons are collected by the resonator and induce high frequency currents and charges that, in turn, couple to the mechanical degrees of freedom. The resulting mechanical motion is read-out optically, allowing our device to function as a compact and efficient terahertz detector at room temperature. Furthermore the device operates at high modulation frequencies (>10MHz), well beyond the cut-off frequencies of Golay cells, pyroelectric detectors and cryogenic semiconductor bolometers [16,17]. Notably, our experiments unambiguously reveal an instantaneous THz detection mechanism arising from a nano-scale Coulomb interaction, with a Noise Equivalent Power that is potentially frequency independent. Alongside this effect, our compact geometry allows for an uncooled bolometric detection [18] with extremely short heat diffusion times (few microseconds) and high detectivity. △ Less

Submitted 31 May, 2017; v1 submitted 6 April, 2016; originally announced April 2016.

High-precision spectral tuning of micro and nanophotonic cavities by resonantly enhanced photoelectrochemical etching

Authors: Eduardo Gil-Santos, Christophe Baker, Aristide Lemaitre, Carmen Gomez, Sara Ducci, Giuseppe Leo, Ivan Favero

Abstract: We present a simple method to tune optical micro- and nanocavities with picometer precision in the resonant wavelength, corresponding to an effective sub atomic monolayer control of the cavity dimension. This is obtained through resonant photo-electrochemical etching, with in-situ monitoring of the optical spectrum. We employ this technique to spectrally align an ensemble of resonant cavities in a… ▽ More We present a simple method to tune optical micro- and nanocavities with picometer precision in the resonant wavelength, corresponding to an effective sub atomic monolayer control of the cavity dimension. This is obtained through resonant photo-electrochemical etching, with in-situ monitoring of the optical spectrum. We employ this technique to spectrally align an ensemble of resonant cavities in a permanent manner, overcoming the dimension variability resulting from current nanofabrication techniques. In a device containing several resonators, each is individually addressed and tuned, with no optical quality factor degradation. The technique is general and opens the way to multiple applications, such as the straightforward fabrication of networks of identical coupled resonators, or the tuning of chip-based cavities to external references. △ Less

Submitted 19 November, 2015; originally announced November 2015.

Comments: 8 pages, 7 figures

Journal ref: Nature Communications, vol. 8, p. 14267, Jan. 2017

Integrated AlGaAs source of highly indistinguishable and energy-time entangled photons

Authors: Claire Autebert, Natalia Bruno, Anthony Martin, Aristide Lemaître, Carmen Gomez Carbonell, Ivan Favero, Giuseppe Leo, Hugo Zbinden, Sara Ducci

Abstract: The generation of nonclassical states of light in miniature chips is a crucial step towards practical implementations of future quantum technologies. Semiconductor materials are ideal to achieve extremely compact and massively parallel systems and several platforms are currently under development. In this context, spontaneous parametric down conversion in AlGaAs devices combines the advantages of… ▽ More The generation of nonclassical states of light in miniature chips is a crucial step towards practical implementations of future quantum technologies. Semiconductor materials are ideal to achieve extremely compact and massively parallel systems and several platforms are currently under development. In this context, spontaneous parametric down conversion in AlGaAs devices combines the advantages of room temperature operation, possibility of electrical injection and emission in the telecom band. Here we report on a chip-based AlGaAs source, producing indistinguishable and energy-time entangled photons with a brightness of $7.2\times10^6$ pairs/s and a signal-to-noise ratio of $141\pm12$. Indistinguishability between the photons is demonstrated via a Hong-Ou-Mandel experiment with a visibility of $89\pm3\%$, while energy-time entanglement is tested via a Franson interferometer leading to a value for the Bell parameter $ S=2.70\pm0.10$. △ Less

Submitted 20 July, 2015; originally announced July 2015.

Origin of optical losses in gallium arsenide disk whispering gallery resonators

Authors: David Parrain, Christophe Baker, Guillaume Wang, Biswarup Guha, Eduardo Gil Santos, Aristide Lemaitre, Pascale Senellart, Giuseppe Leo, Sara Ducci, Ivan Favero

Abstract: Whispering gallery modes in GaAs disk resonators reach half a million of optical quality factor. These high Qs remain still well below the ultimate design limit set by bending losses. Here we investigate the origin of residual optical dissipation in these devices. A Transmission Electron Microscope analysis is combined with an improved Volume Current Method to precisely quantify optical scattering… ▽ More Whispering gallery modes in GaAs disk resonators reach half a million of optical quality factor. These high Qs remain still well below the ultimate design limit set by bending losses. Here we investigate the origin of residual optical dissipation in these devices. A Transmission Electron Microscope analysis is combined with an improved Volume Current Method to precisely quantify optical scattering losses by roughness and waviness of the structures, and gauge their importance relative to intrinsic material and radiation losses. The analysis also provides a qualitative description of the surface reconstruction layer, whose optical absorption is then revealed by comparing spectroscopy experiments in air and in different liquids. Other linear and nonlinear optical loss channels in the disks are evaluated likewise. Routes are given to further improve the performances of these miniature GaAs cavities. △ Less

Submitted 17 July, 2015; originally announced July 2015.

Comments: 18 pages

High frequency nano-optomechanical disk resonators in liquids

Authors: E. Gil-Santos, C. Baker, D. T. Nguyen, W. Hease, A. Lemaître, S. Ducci, G. Leo, I. Favero

Abstract: Vibrating nano- and micromechanical resonators have been the subject of research aiming at ultrasensitive mass sensors for mass spectrometry, chemical analysis and biomedical diagnosis. Unfortunately, their merits diminish dramatically in liquids due to dissipative mechanisms like viscosity and acoustic losses. A push towards faster and lighter miniaturized nanodevices would enable improved perfor… ▽ More Vibrating nano- and micromechanical resonators have been the subject of research aiming at ultrasensitive mass sensors for mass spectrometry, chemical analysis and biomedical diagnosis. Unfortunately, their merits diminish dramatically in liquids due to dissipative mechanisms like viscosity and acoustic losses. A push towards faster and lighter miniaturized nanodevices would enable improved performances, provided dissipation was controlled and novel techniques were available to efficiently drive and read-out their minute displacement. Here we report on a nano-optomechanical approach to this problem using miniature semiconductor disks. These devices combine mechanical motion at high frequency above the GHz, ultra-low mass of a few picograms, and moderate dissipation in liquids. We show that high-sensitivity optical measurements allow to direct resolve their thermally driven Brownian vibrations, even in the most dissipative liquids. Thanks to this novel technique, we experimentally, numerically and analytically investigate the interaction of these resonators with arbitrary liquids. Nano-optomechanical disks emerge as probes of rheological information of unprecedented sensitivity and speed, opening applications in sensing and fundamental science. △ Less

Submitted 11 March, 2015; originally announced March 2015.

Improved optomechanical disk resonator sitting on a pedestal mechanical shield

Authors: Dac Trung Nguyen, William Hease, Christopher Baker, Eduardo Gil-Santos, Pascale Senellart, Aristide Lemaître, Sara Ducci, Giuseppe Leo, Ivan Favero

Abstract: We experimentally demonstrate the controlled enhancement of the mechanical quality factor Q of GaAs disk optomechanical resonators. Disks vibrating at 1.3 GHz with a mechanical shield integrated in their pedestal show a Q improvement by a factor 10 to 16. The structure is modeled numerically and different modes of vibration are observed, which shed light on the Q enhancement mechanism. An optimize… ▽ More We experimentally demonstrate the controlled enhancement of the mechanical quality factor Q of GaAs disk optomechanical resonators. Disks vibrating at 1.3 GHz with a mechanical shield integrated in their pedestal show a Q improvement by a factor 10 to 16. The structure is modeled numerically and different modes of vibration are observed, which shed light on the Q enhancement mechanism. An optimized double-disk geometry is presented that promises Q above the million for a large parameter range. △ Less

Submitted 21 November, 2014; originally announced November 2014.

Comments: 6 pages, 5 figures

Photoelastic coupling in gallium arsenide optomechanical disk resonators

Authors: Christopher Baker, William Hease, Dac-Trung Nguyen, Alessio Andronico, Sara Ducci, Giuseppe Leo, Ivan Favero

Abstract: We analyze the magnitude of the radiation pressure and electrostrictive stresses exerted by light confined inside GaAs semiconductor WGM optomechanical disk resonators, through analytical and numerical means, and find the electrostrictive force to be of prime importance. We investigate the geometric and photoelastic optomechanical coupling resulting respectively from the deformation of the disk bo… ▽ More We analyze the magnitude of the radiation pressure and electrostrictive stresses exerted by light confined inside GaAs semiconductor WGM optomechanical disk resonators, through analytical and numerical means, and find the electrostrictive force to be of prime importance. We investigate the geometric and photoelastic optomechanical coupling resulting respectively from the deformation of the disk boundary and from the strain-induced refractive index changes in the material, for various mechanical modes of the disks. Photoelastic optomechanical coupling is shown to be a predominant coupling mechanism for certain disk dimensions and mechanical modes, leading to total coupling g$_{om}$ and g$_0$ reaching respectively 3 THz/nm and 4 MHz. Finally, we point towards ways to maximize the photoelastic coupling in GaAs disk resonators, and we provide some upper bounds for its value in various geometries. △ Less

Submitted 17 March, 2014; originally announced March 2014.

Journal ref: Optics Express Vol. 22, Issue 12, pp. 14072-14086 (2014)

An electrically injected photon-pair source at room temperature

Authors: Fabien Boitier, Adeline Orieux, Claire Autebert, Aristide Lemaître, Elisabeth Galopin, Christophe Manquest, Carlo Sirtori, Ivan Favero, Giuseppe Leo, Sara Ducci

Abstract: One of the main challenges for future quantum information technologies is miniaturization and integration of high performance components in a single chip. In this context, electrically driven sources of non-classical states of light have a clear advantage over optically driven ones. Here we demonstrate the first electrically driven semiconductor source of photon pairs working at room temperature a… ▽ More One of the main challenges for future quantum information technologies is miniaturization and integration of high performance components in a single chip. In this context, electrically driven sources of non-classical states of light have a clear advantage over optically driven ones. Here we demonstrate the first electrically driven semiconductor source of photon pairs working at room temperature and telecom wavelength. The device is based on type-II intracavity Spontaneous Parametric Down-Conversion in an AlGaAs laser diode and generates pairs at 1.57 $μ$m. Time-correlation measurements of the emitted pairs give an internal generation efficiency of $7 \times 10^{-11}$ pairs/injected electron. The capability of our platform to support generation, manipulation and detection of photons opens the way to the demonstration of massively parallel systems for complex quantum operations. △ Less

Submitted 25 December, 2013; v1 submitted 20 December, 2013; originally announced December 2013.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett., 112 p,183901 (2014)

Direct high-resolution characterization of quantum correlations via classical measurements

Authors: Andreas Eckstein, Guillaume Boucher, Aristide Lemaître, Pascal Filloux, Ivan Favero, Giuseppe Leo, John E. Sipe, Marco Liscidini, Sara Ducci

Abstract: Quantum optics plays a central role in the study of fundamental concepts in quantum mechanics, and in the development of new technological applications. Typical experiments employ non-classical light, such as entangled photons, generated by parametric processes. The standard characterization of the sources by quantum tomography, which relies on detecting the pairs themselves and thus requires sing… ▽ More Quantum optics plays a central role in the study of fundamental concepts in quantum mechanics, and in the development of new technological applications. Typical experiments employ non-classical light, such as entangled photons, generated by parametric processes. The standard characterization of the sources by quantum tomography, which relies on detecting the pairs themselves and thus requires single photon detectors, limits both measurement speed and accuracy. Here we show that the spectral characterization of the quantum correlations generated by two-photon sources can be directly performed classically with an unprecedented spectral resolution. This streamlined technique has the potential to speed up design and testing of massively parallel integrated sources by providing a fast and reliable quality control procedure. Adapting our method to explore other degrees of freedom would allow the complete characterization of biphoton states generated by parametric processes. △ Less

Submitted 15 December, 2013; originally announced December 2013.

Comments: 21 pages, 7 figures

Journal ref: Laser Photonics Rev. 8, No. 5, L76-L80 (2014)

Ultrahigh Q-Frequency product for optomechanical disk resonators with a mechanical shield

Authors: Dac Trung Nguyen, Christophe Baker, William Hease, Selsabil Sejil, Pascale Senellart, Aristide Lemaitre, Sara Ducci, Giuseppe Leo, Ivan Favero

Abstract: We report on optomechanical GaAs disk resonators with ultrahigh quality factor - frequency product Qf. Disks standing on a simple pedestal exhibit GHz breathing modes attaining a Qf of 10^13 measured under vacuum at cryogenic temperature. Clam** losses are found to be the dominant source of dissipation in this configuration. A new type of disk resonator integrating a shield within the pedestal i… ▽ More We report on optomechanical GaAs disk resonators with ultrahigh quality factor - frequency product Qf. Disks standing on a simple pedestal exhibit GHz breathing modes attaining a Qf of 10^13 measured under vacuum at cryogenic temperature. Clam** losses are found to be the dominant source of dissipation in this configuration. A new type of disk resonator integrating a shield within the pedestal is then proposed and its working principles and performances investigated by numerical simulations. For dimensions compatible with fabrication constraints, the clam**-loss-limited Q reaches 10^7-10^9 corresponding to Qf of 10^16-10^18. This shielded pedestal approach applies to any heterostructure presenting an acoustic mismatch. △ Less

Submitted 20 September, 2013; v1 submitted 19 September, 2013; originally announced September 2013.

Comments: 4 pages, 1 table, 3 figures

Dam** and non-linearity of a levitating magnet in rotation above a superconductor

Authors: Jérémie Druge, Oscar Laurent, Marie-Aude Méasson, Ivan Favero

Abstract: We study the dissipation of moving magnets in levitation above a superconductor. The rotation motion is analyzed using optical tracking techniques. It displays a remarkable regularity together with long dam** time up to several hours. The magnetic contribution to the dam** is investigated in detail by comparing 14 distinct magnetic configurations, and points towards amplitude-dependent dissipa… ▽ More We study the dissipation of moving magnets in levitation above a superconductor. The rotation motion is analyzed using optical tracking techniques. It displays a remarkable regularity together with long dam** time up to several hours. The magnetic contribution to the dam** is investigated in detail by comparing 14 distinct magnetic configurations, and points towards amplitude-dependent dissipation mechanisms. The non-linear dynamics of the mechanical rotation motion is also revealed and described with an effective Duffing model. The obtained picture of the coupling of levitating magnets to their environment sheds light on their potential as ultra-low dissipation mechanical oscillators for high precision physics. △ Less

Submitted 19 July, 2013; originally announced July 2013.

Single Polariton Optomechanics

Authors: Juan Restrepo, Cristiano Ciuti, Ivan Favero

Abstract: This paper investigates a novel hybrid cavity QED-optomechanics situation. We solve the Hamiltonian problem of a cavity coupled both to a two-level atom via a Jaynes-Cummings coupling and to a mechanical motion via radiation pressure coupling. The atom-cavity polariton number operator commutes with the total Hamiltonian leading to an exact analytical solution involving tripartite atom-cavity-mecha… ▽ More This paper investigates a novel hybrid cavity QED-optomechanics situation. We solve the Hamiltonian problem of a cavity coupled both to a two-level atom via a Jaynes-Cummings coupling and to a mechanical motion via radiation pressure coupling. The atom-cavity polariton number operator commutes with the total Hamiltonian leading to an exact analytical solution involving tripartite atom-cavity-mechanics polarons. Under optical pum** of polaronic transitions the system displays unusual atom-assisted cooling and amplification of mechanical motion. We demonstrate the possibility to obtain enhanced optomechanical cooling at the single polariton level, strong bunching of phonons, and describe the peculiar quantum noise statistics of mechanical motion in the single polariton amplification limit. △ Less

Submitted 27 November, 2013; v1 submitted 16 July, 2013; originally announced July 2013.

Comments: PRL in press

Bell states generation on a III-V semiconductor chip at room temperature

Authors: Adeline Orieux, Andreas Eckstein, Aristide Lemaître, Pascal Filloux, Ivan Favero, Giuseppe Leo, Thomas Coudreau, Arne Keller, Pérola Milman, Sara Ducci

Abstract: We demonstrate the generation of polarization-entangled photon pairs at room temperature and telecom wavelength in a AlGaAs semiconductor waveguide. The source is based on spontaneous parametric down conversion with a counterpropagating phase-matching scheme. The quality of the two-photon state is assessed by the reconstruction of the density matrix giving a raw fidelity to a Bell state of 0.83; a… ▽ More We demonstrate the generation of polarization-entangled photon pairs at room temperature and telecom wavelength in a AlGaAs semiconductor waveguide. The source is based on spontaneous parametric down conversion with a counterpropagating phase-matching scheme. The quality of the two-photon state is assessed by the reconstruction of the density matrix giving a raw fidelity to a Bell state of 0.83; a theoretical model, taking into account the experimental parameters, provides ways to understand and control the amount of entanglement. Its compatibility with electrical injection, together with the high versatility of the generated two-photon state, make this source an attractive candidate for completely integrated quantum photonics devices. △ Less

Submitted 2 October, 2013; v1 submitted 9 January, 2013; originally announced January 2013.

Journal ref: Physical Review Letters (2013) 160502

Cavity-enhanced optical detection of carbon nanotube Brownian motion

Authors: S. Stapfner, L. Ost, D. Hunger, E. M. Weig, J. Reichel, I. Favero

Abstract: Optical cavities with small mode volume are well-suited to detect the vibration of sub-wavelength sized objects. Here we employ a fiber-based, high-finesse optical microcavity to detect the Brownian motion of a freely suspended carbon nanotube at room temperature under vacuum. The optical detection resolves deflections of the oscillating tube down to 50pm/Hz^1/2. A full vibrational spectrum of the… ▽ More Optical cavities with small mode volume are well-suited to detect the vibration of sub-wavelength sized objects. Here we employ a fiber-based, high-finesse optical microcavity to detect the Brownian motion of a freely suspended carbon nanotube at room temperature under vacuum. The optical detection resolves deflections of the oscillating tube down to 50pm/Hz^1/2. A full vibrational spectrum of the carbon nanotube is obtained and confirmed by characterization of the same device in a scanning electron microscope. Our work successfully extends the principles of high-sensitivity optomechanical detection to molecular scale nanomechanical systems. △ Less

Submitted 7 November, 2012; originally announced November 2012.

Comments: 14 pages, 11 figures

Journal ref: Appl. Phys. Lett. 102, 151910 (2013)

Miniature GaAs disk resonators probed by a looped fiber taper for optomechanics applications

Authors: L. Ding, P. Senellart, A. Lemaitre, S. Ducci, G. Leo, I. Favero

Abstract: GaAs disk resonators (typical disk size 5 \mum * 200 nm in our work) are good candidates for boosting optomechanical coupling thanks to their ability to confine both optical and mechanical energy in a sub-micron interaction volume. We present results of optomechanical characterization of GaAs disks by near-field optical coupling from a tapered silica nano-waveguide. Whispering gallery modes with o… ▽ More GaAs disk resonators (typical disk size 5 \mum * 200 nm in our work) are good candidates for boosting optomechanical coupling thanks to their ability to confine both optical and mechanical energy in a sub-micron interaction volume. We present results of optomechanical characterization of GaAs disks by near-field optical coupling from a tapered silica nano-waveguide. Whispering gallery modes with optical Q factor up to a few 10^5 are observed. Critical coupling, optical resonance doublet splitting and mode identification are discussed. We eventually show an optomechanical phenomenon of optical force attraction of the silica taper to the disk. This phenomenon shows that mechanical and optical degrees of freedom naturally couple at the micro-nanoscale. △ Less

Submitted 16 June, 2012; originally announced June 2012.

Journal ref: Proc. SPIE 7712, 771211 (2010)

Dam** of optomechanical disks resonators vibrating in air

Authors: D. Parrain, C. Baker, T. Verdier, P. Senellart, A. Lemaitre, S. Ducci, G. Leo, I. Favero

Abstract: We report on miniature GaAs disk optomechanical resonators vibrating in air in the radiofrequency range. The flexural modes of the disks are studied by scanning electron microscopy and optical interferometry, and correctly modeled with the elasticity theory for annular plates. The mechanical dam** is systematically measured, and confronted with original analytical models for air dam**. Formula… ▽ More We report on miniature GaAs disk optomechanical resonators vibrating in air in the radiofrequency range. The flexural modes of the disks are studied by scanning electron microscopy and optical interferometry, and correctly modeled with the elasticity theory for annular plates. The mechanical dam** is systematically measured, and confronted with original analytical models for air dam**. Formulas are derived that correctly reproduce both the mechanical modes and the dam** behavior, and can serve as design tools for optomechanical applications in fluidic environment. △ Less

Submitted 14 June, 2012; originally announced June 2012.

Journal ref: Appl. Phys. Lett. 100, 242105 (2012)

Cavity nano-optomechanics: a nanomechanical system in a high finesse optical cavity

Authors: Sebastian Stapfner, Ivan Favero, David Hunger, Philipp Paulitschke, Jakob Reichel, Khaled Karrai, Eva M. Weig

Abstract: The coupling of mechanical oscillators with light has seen a recent surge of interest, as recent reviews report.[1, 2] This coupling is enhanced when confining light in an optical cavity where the mechanical oscillator is integrated as back- mirror or movable wall. At the nano-scale, the optomechanical coupling increases further thanks to a smaller optomechanical interaction volume and reduced mas… ▽ More The coupling of mechanical oscillators with light has seen a recent surge of interest, as recent reviews report.[1, 2] This coupling is enhanced when confining light in an optical cavity where the mechanical oscillator is integrated as back- mirror or movable wall. At the nano-scale, the optomechanical coupling increases further thanks to a smaller optomechanical interaction volume and reduced mass of the mechanical oscillator. In view of realizing such cavity nano- optomechanics experiments, a scheme was proposed where a sub-wavelength sized nanomechanical oscillator is coupled to a high finesse optical microcavity.[3] Here we present such an experiment involving a single nanomechanical rod precisely positioned into the confined mode of a miniature Fabry-Pérot cavity.[4] We describe the employed stabilized cavity set-up and related finesse measurements. We proceed characterizing the nanorod vibration properties using ultrasonic piezo-actuation methods. Using the optical cavity as a transducer of nanomechanical motion, we monitor optically the piezo-driven nanorod vibration. On top of extending cavity quantum electrodynamics concepts to nanomechanical systems, cavity nano-optomechanics should advance into precision displacement measurements near the standard quantum limit [5], investigation of mechanical systems in their quantum regime, non-linear dynamics [6] and sensing applications. △ Less

Submitted 28 October, 2011; originally announced October 2011.

Comments: This paper was published in Proc. SPIE 7727, 772706 (2010), and is made available as an electronic reprint with permission of SPIE. Copyright notice added to first page of article

Journal ref: published in Proc. SPIE 7727, 772706 (2010)

Critical optical coupling between a GaAs disk and a nanowaveguide suspended on the chip

Authors: C. Baker, C. Belacel, A. Andronico, P. Senellart, A. Lemaitre, E. Galopin, S. Ducci, G. Leo, I. Favero

Abstract: We report on an integrated GaAs disk/waveguide system. A millimeter-long waveguide is suspended and tapered on the chip over a length of 25 μm to evanescently couple to high Q optical whispering gallery modes of a GaAs disk. The critical coupling regime is obtained both by varying the disk/guide gap distance and the width of the suspended nanoscale taper. The experimental results are in good agree… ▽ More We report on an integrated GaAs disk/waveguide system. A millimeter-long waveguide is suspended and tapered on the chip over a length of 25 μm to evanescently couple to high Q optical whispering gallery modes of a GaAs disk. The critical coupling regime is obtained both by varying the disk/guide gap distance and the width of the suspended nanoscale taper. The experimental results are in good agreement with predictions from the coupled mode theory. △ Less

Submitted 2 August, 2011; originally announced August 2011.

Comments: 14 pages, 4 figures

Wavelength-sized GaAs optomechanical resonators with GHz frequency

Authors: Lu Ding, Christophe Baker, Pascale Senellart, Aristide Lemaitre, Sara Ducci, Giuseppe Leo, Ivan Favero

Abstract: We report on wavelength-sized GaAs optomechanical disk resonators showing ultra-strong optomechanical interaction. We observe optical transduction of a disk mechanical breathing mode with 1.4 GHz frequency and effective mass of ~ 2 pg. The measured vacuum optomechanical coupling rate reaches 0.8 MHz, with a related differential optomechanical coupling factor of 485 GHz/nm. The disk Brownian motion… ▽ More We report on wavelength-sized GaAs optomechanical disk resonators showing ultra-strong optomechanical interaction. We observe optical transduction of a disk mechanical breathing mode with 1.4 GHz frequency and effective mass of ~ 2 pg. The measured vacuum optomechanical coupling rate reaches 0.8 MHz, with a related differential optomechanical coupling factor of 485 GHz/nm. The disk Brownian motion is optically resolved with a sensitivity of 10-17 m/{\sqrt}Hz at room temperature and pressure. △ Less

Submitted 24 January, 2011; originally announced January 2011.

Comments: 8 pages, 3 figures

Classical and Quantum Theory of Photothermal Cavity Cooling of a Mechanical Oscillator

Authors: Juan Restrepo, Julien Gabelli, Cristiano Ciuti, Ivan Favero

Abstract: Photothermal effects allow very efficient optomechanical coupling between mechanical degrees of freedom and photons. In the context of cavity cooling of a mechanical oscillator, the question of if the quantum ground state of the oscillator can be reached using photothermal back-action has been debated and remains an open question. Here we address this problem by complementary classical and quantum… ▽ More Photothermal effects allow very efficient optomechanical coupling between mechanical degrees of freedom and photons. In the context of cavity cooling of a mechanical oscillator, the question of if the quantum ground state of the oscillator can be reached using photothermal back-action has been debated and remains an open question. Here we address this problem by complementary classical and quantum calculations. Both lead us to conclude that: first, the ground-state can indeed be reached using photothermal cavity cooling, second, it can be reached in a regime where the cavity detuning is small allowing a large amount of photons to enter the cavity. △ Less

Submitted 17 November, 2010; originally announced November 2010.

Comments: 27 pages, 3 figures

Journal ref: C. R. Physique 12, 860-870 (2011)

High frequency GaAs nano-optomechanical disk resonator

Authors: Lu Ding, Christophe Baker, Pascale Senellart, Aristide Lemaitre, Sara Ducci, Giuseppe Leo, Ivan Favero

Abstract: Optomechanical coupling between a mechanical oscillator and light trapped in a cavity increases when the coupling takes place in a reduced volume. Here we demonstrate a GaAs semiconductor optomechanical disk system where both optical and mechanical energy can be confined in a sub-micron scale interaction volume. We observe giant optomechanical coupling rate up to 100 GHz/nm involving picogram mass… ▽ More Optomechanical coupling between a mechanical oscillator and light trapped in a cavity increases when the coupling takes place in a reduced volume. Here we demonstrate a GaAs semiconductor optomechanical disk system where both optical and mechanical energy can be confined in a sub-micron scale interaction volume. We observe giant optomechanical coupling rate up to 100 GHz/nm involving picogram mass mechanical modes with frequency between 100 MHz and 1 GHz. The mechanical modes are singled-out measuring their dispersion as a function of disk geometry. Their Brownian motion is optically resolved with a sensitivity of 10^(-17)m/sqrt(Hz) at room temperature and pressure, approaching the quantum limit imprecision. △ Less

Submitted 20 July, 2010; originally announced July 2010.

Comments: 7 pages, 3 figures

Ultra-low loss single-mode silica tapers manufactured by a microheater

Authors: Lu Ding, Cherif Belacel, Sara Ducci, Giuseppe Leo, Ivan Favero

Abstract: Using a ceramic thermoelectric heater, we show highly reproducible fabrication of single-mode sub-wavelength silica tapers with ultra-low loss level. The reproducibility of the process is studied statistically, leading to an average taper transmission of 94%. The best tapers have a transmission superior to 99%, above common level reached by other fabrication methods. The taper profile is inspect… ▽ More Using a ceramic thermoelectric heater, we show highly reproducible fabrication of single-mode sub-wavelength silica tapers with ultra-low loss level. The reproducibility of the process is studied statistically, leading to an average taper transmission of 94%. The best tapers have a transmission superior to 99%, above common level reached by other fabrication methods. The taper profile is inspected along its length and closely follows the exponential profile predicted by the model of Birks and Li. This high degree of control over the taper shape allows a detailed analysis of the transition to the single-mode regime during tapering. As an application of this fabrication method, we present a micro-looped taper probe for evanescent coupling experiments requiring fine spatial selectivity. △ Less

Submitted 18 January, 2010; originally announced January 2010.