Showing 1–18 of 18 results for author: Fauvarque, O

Strategy for sensing petal mode in presence of AO residual turbulence with pyramid wavefront sensor

Authors: Nicolas Levraud, Vincent Chambouleyron, Jean François Sauvage, Benoit Neichel, Mahawa Cisse, Olivier Fauvarque, Guido Agapito, Cédric Plantet, Anne Laure Cheffot, Enrico Pinna, Simone Esposito2, Thierry Fusco

Abstract: With the Extremely Large Telescope-generation telescopes come new challenges. The complexity of these telescopes' pupil creates new problems for Adaptive Optics. In particular, the large spiders necessary to support the massive optics of these telescopes create discontinuities in the wavefront measurement. These discontinuities appear as a new phase error dubbed the `petal mode'. This error is des… ▽ More With the Extremely Large Telescope-generation telescopes come new challenges. The complexity of these telescopes' pupil creates new problems for Adaptive Optics. In particular, the large spiders necessary to support the massive optics of these telescopes create discontinuities in the wavefront measurement. These discontinuities appear as a new phase error dubbed the `petal mode'. This error is described as a differential piston between the fragment of the pupil separated by the spiders and is responsible for reducing the European Extremely Large Telescope's (ELT) resolution to a 15m telescope resolution. The aim of this paper is to study the measurement of the petal mode by adaptive optics sensors. We want to understand why the Pyramid Wavefront Sensor (PyWFS) cannot measure this petal mode under normal conditions and how to allow this measurement by adapting the Adaptive optics control scheme and the PyWFS. To facilitate our study, we consider a simplified version of the petal mode, featuring a simpler pupil than the ELT. We studied specifically how a system that separates the atmospheric turbulence from the petal measurement would behave. The unmodulated PyWFS (uPyWFS) but the uPyWFS does not make accurate measurements in the presence of atmospheric residuals. Studying the petal mode's power spectral density, we propose a filtering step, consisting of a pinhole around the pyramid tip. This reduces the first path residuals seen by the uPyWFS and restores its accuracy. Finally, we demonstrate our proposed system with end-to-end simulations.To address the petal problem, a two-path adaptive optics with a sensor dedicated to the measurement of the petal mode seems necessary. Through this paper, we demonstrate that an uPyWFS can confuse the petal mode with the residuals from the first path. However, adding a spatial filter on top of said uPyWFS makes it a good petalometer candidate. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Comments: 18 pages, 15 figures, Accepted in Astronomy and Astrophysics

Modeling noise propagation in Fourier-filtering wavefront sensing, fundamental limits and quantitative comparison

Authors: Vincent Chambouleyron, Olivier Fauvarque, Cédric Plantet, Jean-François Sauvage, Nicolas Levraud, Mahawa Cissé, Benoît Neichel, Thierry Fusco

Abstract: Adaptive optics (AO) is a technique allowing to drastically improve ground-based telescopes angular resolution. The wavefront sensor (WFS) is one of the key components of such systems, driving the fundamental performance limitations. In this paper, we focus on a specific class of WFS: the Fourier-filtering wavefront sensors (FFWFS). This class is known for its extremely high sensitivity. However,… ▽ More Adaptive optics (AO) is a technique allowing to drastically improve ground-based telescopes angular resolution. The wavefront sensor (WFS) is one of the key components of such systems, driving the fundamental performance limitations. In this paper, we focus on a specific class of WFS: the Fourier-filtering wavefront sensors (FFWFS). This class is known for its extremely high sensitivity. However, a clear and comprehensive noise propagation model for any kind of FFWFS is lacking. Considering read-out noise and photon noise, we derive a simple and comprehensive model allowing to understand how these noises propagates in the phase reconstruction in the linear framework. This new noise propagation model works for any kind of FFWFS, and allows to revisit the fundamental sensitivity limit of these sensors. Furthermore, a new comparison between widely used FFWFS is held. We focus on the two main used FFWFS classes: the Zernike WFS (ZWFS) and the pyramid WFS (PWFS), bringing new understanding of their behavior. △ Less

Submitted 6 January, 2023; v1 submitted 27 December, 2022; originally announced December 2022.

Journal ref: A&A 670, A153 (2023)

Optimizing Fourier-Filtering WFS to reach sensitivity close to the fundamental limit

Authors: Vincent Chambouleyron, Olivier Fauvarque, Cédric Plantet, Jean-François Sauvage, Nicolas Levraud, Mahawa Cissé, Benoît Neichel, Thierry Fusco

Abstract: To reach the full potential of the new generation of ground based telescopes, an extremely fine adjustment of the phase is required. Wavefront control and correction before detection has therefore become one of the cornerstones of instruments to achieve targeted performance, especially for high-contrast imaging. A crucial feature of accurate wavefront control leans on the wavefront sensor (WFS). W… ▽ More To reach the full potential of the new generation of ground based telescopes, an extremely fine adjustment of the phase is required. Wavefront control and correction before detection has therefore become one of the cornerstones of instruments to achieve targeted performance, especially for high-contrast imaging. A crucial feature of accurate wavefront control leans on the wavefront sensor (WFS). We present a strategy to design new Fourier-Filtering WFS that encode the phase close from the fundamental photon efficiency limit. This strategy seems promising as it generates highly sensitive sensors suited for different pupil shape configurations. △ Less

Submitted 23 October, 2022; originally announced October 2022.

Journal ref: Proc. SPIE 12185, Adaptive Optics Systems VIII, 121852T (29 August 2022)

Three-sided pyramid wavefront sensor. II. Preliminary demonstration on the new CACTI testbed

Authors: Lauren Schatz, Johanan Codona, Joseph D. Long, Jared R. Males, Weslin Pullen, Jennifer Lumbres, Kyle Van Gorkom, Vincent Chambouleyron, Laird M. Close, Carlos Correia, Olivier Fauvarque, Thierry Fusco, Olivier Guyon, Michael Hart, Pierre Janin-Potiron, Robert Johnson, Nemanja Jovanovic, Mala Mateen, Jean-Francois Sauvage, Benoit Neichel

Abstract: The next generation of giant ground and space telescopes will have the light-collecting power to detect and characterize potentially habitable terrestrial exoplanets using high-contrast imaging for the first time. This will only be achievable if the performance of Giant Segmented Mirror Telescopes (GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full potential. A key component… ▽ More The next generation of giant ground and space telescopes will have the light-collecting power to detect and characterize potentially habitable terrestrial exoplanets using high-contrast imaging for the first time. This will only be achievable if the performance of Giant Segmented Mirror Telescopes (GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full potential. A key component of an ExAO system is the wavefront sensor (WFS), which measures aberrations from atmospheric turbulence. A common choice in current and next-generation instruments is the pyramid wavefront sensor (PWFS). ExAO systems require high spatial and temporal sampling of wavefronts to optimize performance, and as a result, require large detectors for the WFS. We present a closed-loop testbed demonstration of a three-sided pyramid wavefront sensor (3PWFS) as an alternative to the conventional four-sided pyramid wavefront (4PWFS) sensor for GSMT-ExAO applications on the new Comprehensive Adaptive Optics and Coronagraph Test Instrument (CACTI). The 3PWFS is less sensitive to read noise than the 4PWFS because it uses fewer detector pixels. The 3PWFS has further benefits: a high-quality three-sided pyramid optic is easier to manufacture than a four-sided pyramid. We detail the design of the two components of the CACTI system, the adaptive optics simulator and the PWFS testbed that includes both a 3PWFS and 4PWFS. A preliminary experiment was performed on CACTI to study the performance of the 3PWFS to the 4PWFS in varying strengths of turbulence using both the Raw Intensity and Slopes Map signal processing methods. This experiment was repeated for a modulation radius of 1.6 lambda/D and 3.25 lambda/D. We found that the performance of the two wavefront sensors is comparable if modal loop gains are tuned. △ Less

Submitted 7 October, 2022; originally announced October 2022.

Comments: 28 Pages, 15 Figures, and 4 Tables

Adapting the pyramid wavefront sensor for pupil fragmentation of the ELT class telescopes

Authors: Nicolas Levraud, Vincent Chambouleyron, Olivier Fauvarque, Mahawa Cissé, Jean-François Sauvage, Benoît Neichel, Charlotte Bond, Enrico Pinna, Simone Esposito, Noah Schwartz, Thierry Fusco

Abstract: The next generation of Extremely Large Telescope (24 to 39m diameter) will suffer from the so-called "pupil fragmentation" problem. Due to their pupil shape complexity (segmentation, large spiders ...), some differential pistons may appear between some isolated part of the full pupil during the observations. Although classical AO system will be able to correct for turbulence effects, they will be… ▽ More The next generation of Extremely Large Telescope (24 to 39m diameter) will suffer from the so-called "pupil fragmentation" problem. Due to their pupil shape complexity (segmentation, large spiders ...), some differential pistons may appear between some isolated part of the full pupil during the observations. Although classical AO system will be able to correct for turbulence effects, they will be blind to this specific telescope induced perturbations. Hence, such differential piston, a.k.a petal modes, will prevent to reach the diffraction limit of the telescope and ultimately will represent the main limitation of AO-assisted observation with an ELT. In this work we analyse the spatial structure of these petal modes and how it affects the ability of a Pyramid Wavefront sensor to sense them. Then we propose a variation around the classical Pyramid concept for increasing the WFS sensitivity to this particular modes. Nevertheless, We show that one single WFS can not accurately and simultaneously measure turbulence and petal modes. We propose a double path wavefront sensor scheme to solve this problem. We show that such a scheme,associated to a spatial filtering of residual turbulence in the second WFS path dedicated to petal mode sensing, allows to fully measure and correct for both turbulence and fragmentation effects and will eventually restore the full capability and spatial resolution of the future ELT. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Journal ref: Adaptive Optics Systems VIII, Jul 2022, Montr{é}al, France. pp.198

The Three-Sided PyramidWavefront Sensor. I. Simulations and Analysis for Astronomical Adaptive Optics

Authors: Lauren Schatz, Jared R. Males, Carlos Correia, Benoit Neichel, Vincent Chambouleyron, Johanan Codona, Olivier Fauvarque, Jean-François Sauvage, Thierry Fusco, Michael Hart, Pierre Janin-Potiron, Robert Johnson, Joseph Long, Mala Mateen

Abstract: For ExAO instruments for the Giant Segmented Mirror Telescopes (GSMTs), alternative architectures of WFS are under consideration because there is a tradeoff between detector size, speed, and noise that reduces the performance of GSMT-ExAO wavefront control. One option under consideration for a GSMT-ExAO wavefront sensor is a three-sided PWFS (3PWFS). The 3PWFS creates three copies of the telescope… ▽ More For ExAO instruments for the Giant Segmented Mirror Telescopes (GSMTs), alternative architectures of WFS are under consideration because there is a tradeoff between detector size, speed, and noise that reduces the performance of GSMT-ExAO wavefront control. One option under consideration for a GSMT-ExAO wavefront sensor is a three-sided PWFS (3PWFS). The 3PWFS creates three copies of the telescope pupil for wavefront sensing, compared to the conventional four-sided PWFS (4PWFS) which uses four pupils. The 3PWFS uses fewer detector pixels than the 4PWFS and should therefore be less sensitive to read noise. Here we develop a mathematical formalism based on the diffraction theory description of the Foucault knife edge test that predicts the intensity pattern after the PWFS. Our formalism allows us to calculate the intensity in the pupil images formed by the PWFS in the presence of phase errors corresponding to arbitrary Fourier modes. We then use the Object Oriented MATLAB Adaptive Optics toolbox (OOMAO) to simulate an end-to-end model of an adaptive optics system using a PWFS with modulation and compare the performance of the 3PWFS to the 4PWFS. In the case of a low read noise detector, the Strehl ratios of the 3PWFS and 4PWFS are within 0.01. When we included higher read noise in the simulation, we found a Strehl ratio gain of 0.036 for the 3PWFS using Raw Intensity over the 4PWFS using Slopes Maps at a stellar magnitude of 10. At the same magnitude, the 4PWFS RI also outperformed the 4PWFS SM, but the gain was only 0.012 Strehl. This is significant because 4PWFS using Slopes Maps is how the PWFS is conventionally used for AO wavefront sensing. We have found that the 3PWFS is a viable wavefront sensor that can fully reconstruct a wavefront and produce a stable closed-loop with correction comparable to that of a 4PWFS, with modestly better performance for high read-noise detectors. △ Less

Submitted 13 September, 2021; originally announced September 2021.

Comments: 39 pages, 15 figures

Variation on a Zernike wavefront sensor theme: optimal use of photons

Authors: Vincent Chambouleyron, Olivier Fauvarque, Jean-François Sauvage, Kjetil Dohlen, Nicolas Levraud, Arthur Vigan, Mamadou N'Diaye, Benoît Neichel, Thierry Fusco

Abstract: The Zernike wavefront sensor (ZWFS) is a concept belonging to the wide class Fourier-filtering wavefront sensor (FFWFS). The ZWFS is known for its extremely high sensitivity while having a low dynamic range, which makes it a unique sensor for second stage adaptive optics (AO) systems or quasi-static aberrations calibration sensor. This sensor is composed of a focal plane mask made of a phase shift… ▽ More The Zernike wavefront sensor (ZWFS) is a concept belonging to the wide class Fourier-filtering wavefront sensor (FFWFS). The ZWFS is known for its extremely high sensitivity while having a low dynamic range, which makes it a unique sensor for second stage adaptive optics (AO) systems or quasi-static aberrations calibration sensor. This sensor is composed of a focal plane mask made of a phase shifting dot fully described by two parameters: its diameter and depth. In this letter, we aim to improve the performance of this sensor by changing the diameter of its phase shifting dot. We begin with a general theoretical framework providing an analytical description of the FFWFS properties, then we predict the expected ZWFS sensitivity for different configurations of dot diameters and depths. The analytical predictions are then validated with end-to-end simulations. From this, we propose a variation of the classical ZWFS shape which exhibits extremely appealing properties. We show that the ZWFS sensitivity can be optimized by modifying the dot diameter and even reach the optimal theoretical limit, with a trade-off for low spatial frequencies sensitivity. As an example, we show that a ZWFS with a 2λ/D dot diameter (where λ is the sensing wavelength and D the telescope diameter), hereafter called Z2WFS, exhibits a sensitivity twice higher than the classical 1.06λ/D ZWFS for all the phase spatial components except for tip-tilt modes. Furthermore, this gain in sensitivity does not impact the dynamic range of the sensor, and the Z2WFS exhibits a similar dynamical range as the classical 1.06λ/D ZWFS. This study opens the path to the conception of diameter-optimized ZWFS. △ Less

Submitted 17 May, 2021; originally announced May 2021.

The focal-plane assisted pyramid wavefront sensor: enabling frame-by-frame optical gains tracking

Authors: Vincent Chambouleyron, Olivier Fauvarque, Jean-François Sauvage, Benoît Neichel, Thierry Fusco

Abstract: With its high sensitivity, the Pyramid wavefront sensor (PyWFS) is becoming an advantageous sensor for astronomical adaptive optics (AO) systems. However, this sensor exhibits significant non-linear behaviours leading to challenging AO control issues. In order to mitigate these effects, we propose to use, in addition to the classical pyramid sensor, a focal plane image combined with a convolutive… ▽ More With its high sensitivity, the Pyramid wavefront sensor (PyWFS) is becoming an advantageous sensor for astronomical adaptive optics (AO) systems. However, this sensor exhibits significant non-linear behaviours leading to challenging AO control issues. In order to mitigate these effects, we propose to use, in addition to the classical pyramid sensor, a focal plane image combined with a convolutive description of the sensor to perform a fast tracking of the PyWFS non-linearities, the so-called optical gains (OG). We show that this additional focal plane imaging path only requires a small fraction of the total flux, while representing a robust solution to estimate the PyWFS OG. Finally, we demonstrate the gain brought by our method with the specific examples of bootstrap and Non-Common Path Aberrations (NCPA) handling. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Journal ref: A&A 649, A70 (2021)

INGOT Wavefront Sensor: from the optical design to a preliminary laboratory test

Authors: Simone Di Filippo, Davide Greggio, Maria Bergomi, Kalyan Radhakrishnan, Elisa Portaluri, Valentina Viotto, Carmelo Arcidiacono, Demetrio Magrin, Luca Marafatto, Marco Dima, Roberto Ragazzoni, Pierre Janin-Potiron, Lauren Schatz, Benoit Neichel, Olivier Fauvarque, Thierry Fusco

Abstract: The Ingot wavefront sensor is a novel pupil-plane wavefront sensor, specifically designed to cope with the elongation typical of the extended nature of the Laser Guide Star (LGS). In the framework of the ELT, we propose an optical solution suitable for a Laser launch telescope, located outside the telescope pupil. In this paper, we present the current optical design, based on a reflective roof-sha… ▽ More The Ingot wavefront sensor is a novel pupil-plane wavefront sensor, specifically designed to cope with the elongation typical of the extended nature of the Laser Guide Star (LGS). In the framework of the ELT, we propose an optical solution suitable for a Laser launch telescope, located outside the telescope pupil. In this paper, we present the current optical design, based on a reflective roof-shaped prism, which, at the level of the focal plane, splits the light from an LGS producing three beams. The three images of the telescope pupils can be then used for the retrieval of the first derivative of the wavefront. The 3D nature of such a device requires new alignment techniques to be determined theoretically and verified in the real world. A possible fully automated procedure, relying solely on the illumination observed at the three pupils, to align the prism to the image of the LGS is discussed. Careful attention needs to be put both on the telecentricity of the system and on the reference systems of the Ingot adjustments in the 3D space. This is crucial in order to disentangle all the possible misalignment effects. In this context, we devised a test-bench able to reproduce, in a scaled manner, the 3D illumination that the Ingot will face at the ELT, in order to validate the design and to perform preliminary tests of phase retrieval. △ Less

Submitted 19 January, 2021; originally announced January 2021.

Comments: 6 pages, 8 figures, AO4ELT6 conference proceeding, http://ao4elt6.copl.ulaval.ca/proceedings.html

Pyramid wavefront sensor optical gains compensation using a convolutional model

Authors: Vincent Chambouleyron, Olivier Fauvarque, Pierre Janin-Potiron, Carlos Correia, Jean-François Sauvage, Noah Schwartz, Benoît Neichel, Thierry Fusco

Abstract: Extremely Large Telescopes have overwhelmingly opted for the Pyramid wavefront sensor (PyWFS) over the more widely used Shack-Hartmann WaveFront Sensor (SHWFS) to perform their Single Conjugate Adaptive Optics (SCAO) mode. The PyWFS, a sensor based on Fourier filtering, has proven to be highly successful in many astronomy applications. However, it exhibits non-linearity behaviors that lead to a re… ▽ More Extremely Large Telescopes have overwhelmingly opted for the Pyramid wavefront sensor (PyWFS) over the more widely used Shack-Hartmann WaveFront Sensor (SHWFS) to perform their Single Conjugate Adaptive Optics (SCAO) mode. The PyWFS, a sensor based on Fourier filtering, has proven to be highly successful in many astronomy applications. However, it exhibits non-linearity behaviors that lead to a reduction of its sensitivity when working with non-zero residual wavefronts. This so-called Optical Gains (OG) effect, degrades the close loop performance of SCAO systems and prevents accurate correction of Non-Common Path Aberrations (NCPA). In this paper, we aim at computing the OG using a fast and agile strategy in order to control the PyWFS measurements in adaptive optics closed loop systems. Using a novel theoretical description of the PyFWS, which is based on a convolutional model, we are able to analytically predict the behavior of the PyWFS in closed-loop operation. This model enables us to explore the impact of residual wavefront error on particular aspects such as sensitivity and associated OG. The proposed method relies on the knowledge of the residual wavefront statistics and enables automatic estimation of the current OG. End-to-End numerical simulations are used to validate our predictions and test the relevance of our approach. We demonstrate, using on non-invasive strategy, that our method provides an accurate estimation of the OG. The model itself only requires AO telemetry data to derive statistical information on atmospheric turbulence. Furthermore, we show that by only using an estimation of the current Fried parameter r_0 and the basic system-level characteristics, OGs can be estimated with an accuracy of less than 10%. Finally, we highlight the importance of OG estimation in the case of NCPA compensation. The proposed method is applied to the PyWFS. △ Less

Submitted 15 July, 2020; v1 submitted 15 June, 2020; originally announced June 2020.

Journal ref: A&A 644, A6 (2020)

Performance limits of adaptive-optics/high-contrast imagers with pyramid wave-front sensors

Authors: Carlos M. Correia, Olivier Fauvarque, Charlotte Z. Bond, Vincent Chambouleyron, Jean-Francois Sauvage, Thierry Fusco

Abstract: Advanced AO systems will likely utilise Pyramid wave-front sensors (PWFS) over the traditional Shack-Hartmann sensor in the quest for increased sensitivity, peak performance and ultimate contrast. Here, we wish to bring knowledge and quantify the PWFS theoretical limits as a means to highlight its properties and use cases. We explore forward models for the PWFS in the spatial-frequency domain fo… ▽ More Advanced AO systems will likely utilise Pyramid wave-front sensors (PWFS) over the traditional Shack-Hartmann sensor in the quest for increased sensitivity, peak performance and ultimate contrast. Here, we wish to bring knowledge and quantify the PWFS theoretical limits as a means to highlight its properties and use cases. We explore forward models for the PWFS in the spatial-frequency domain for they prove quite useful since a) they emanate directly from physical-optics (Fourier) diffraction theory; b) provide a straightforward path to meaningful error breakdowns, c) allow for reconstruction algorithms with $O (n\,log(n))$ complexity for large-scale systems and d) tie in seamlessly with decoupled (distributed) optimal predictive dynamic control for performance and contrast optimisation. All these aspects are dealt with here. We focus on recent analytical PWFS developments and demonstrate the performance using both analytic and end-to-end simulations. We anchor our estimates with observed on-sky contrast on existing systems and then show very good agreement between analytical and Monte-Carlo estimates for the PWFS. For a potential upgrade of existing high-contrast imagers on 10\,m-class telescopes with visible or near-infrared PWFS, we show under median conditions at Paranal a contrast improvement (limited by chromatic and scintillation effects) of 2x-5x by replacing the wave-front sensor alone at large separations close to the AO control radius where aliasing dominates, and factors in excess of 10x by coupling distributed control with the PWFS over most of the AO control region, from small separations starting with the Inner Working Angle of typically 1-2 $λ/D$ to the AO correction edge (here 20 $λ/D$). △ Less

Submitted 12 March, 2020; originally announced March 2020.

Comments: 12 pages, 13 figures

Adaptive optics with programmable Fourier-based wavefront sensors: a spatial light modulator approach to the LOOPS testbed

Authors: Pierre Janin-Potiron, Vincent Chambouleyron, Lauren Schatz, Olivier Fauvarque, Charlotte Z. Bond, Yannick Abautret, Eduard Muslimov, Kacem El-Hadi, Jean-François Sauvage, Kjetil Dohlen, Benoît Neichel, Carlos M. Correia, Thierry Fusco

Abstract: Wavefront sensors encode phase information of an incoming wavefront into an intensity pattern that can be measured on a camera. Several kinds of wavefront sensors (WFS) are used in astronomical adaptive optics. Amongst them, Fourier-based wavefront sensors perform a filtering operation on the wavefront in the focal plane. The most well known example of a WFS of this kind is the Zernike wavefront s… ▽ More Wavefront sensors encode phase information of an incoming wavefront into an intensity pattern that can be measured on a camera. Several kinds of wavefront sensors (WFS) are used in astronomical adaptive optics. Amongst them, Fourier-based wavefront sensors perform a filtering operation on the wavefront in the focal plane. The most well known example of a WFS of this kind is the Zernike wavefront sensor, and the pyramid wavefront sensor (PWFS) also belongs to this class. Based on this same principle, new WFSs can be proposed such as the n-faced pyramid (which ultimately becomes an axicone) or the flattened pyramid, depending on whether the image formation is incoherent or coherent. In order to test such novel concepts, the LOOPS adaptive optics testbed hosted at the Laboratoire d'Astrophysique de Marseille has been upgraded by adding a Spatial Light Modulator (SLM). This device, placed in a focal plane produces high-definition phase masks that mimic otherwise bulk optic devices. In this paper, we first present the optical design and upgrades made to the experimental setup of the LOOPS bench. Then, we focus on the generation of the phase masks with the SLM and the implications of having such a device in a focal plane. Finally, we present the first closed-loop results in either static or dynamic mode with different WFS applied on the SLM. △ Less

Submitted 15 March, 2019; originally announced March 2019.

Comments: 14 pages, 9 figures, submitted to JATIS

Kernel formalism applied to Fourier based wave front sensing in presence of residual phases

Authors: Olivier Fauvarque, Pierre Janin-Potiron, Carlos Correia, Yoann Brule, Benoit Neichel, Vincent Chambouleyron, Jean-Francois Sauvage, Thierry Fusco

Abstract: In this paper, we describe Fourier-based Wave Front Sensors (WFS) as linear integral operators, characterized by their Kernel. In a first part, we derive the dependency of this quantity with respect to the WFS's optical parameters: pupil geometry, filtering mask, tip/tilt modulation. In a second part we focus the study on the special case of convolutional Kernels. The assumptions required to be in… ▽ More In this paper, we describe Fourier-based Wave Front Sensors (WFS) as linear integral operators, characterized by their Kernel. In a first part, we derive the dependency of this quantity with respect to the WFS's optical parameters: pupil geometry, filtering mask, tip/tilt modulation. In a second part we focus the study on the special case of convolutional Kernels. The assumptions required to be in such a regime are described. We then show that these convolutional kernels allow to drastically simplify the WFS's model by summarizing its behavior in a concise and comprehensive quantity called the WFS's Impulse Response. We explain in particular how it allows to compute the sensor's sensitivity with respect to the spatial frequencies. Such an approach therefore provides a fast diagnostic tool to compare and optimize Fourier-based WFSs. In a third part, we develop the impact of the residual phases on the sensor's impulse response, and show that the convolutional model remains valid. Finally, a section dedicated to the Pyramid WFS concludes this work, and illustrates how the slopes maps are easily handled by the convolutional model. △ Less

Submitted 21 June, 2019; v1 submitted 14 February, 2019; originally announced February 2019.

Comments: 21 pages, 7 figures

Journal ref: J. Opt. Soc. Am. A 36, 1241-1251 (2019)

Pair-based Analytical model for Segmented Telescopes Imaging from Space (PASTIS) for sensitivity analysis

Authors: Lucie Leboulleux, Jean-François Sauvage, Laurent Pueyo, Thierry Fusco, Rémi Soummer, Johan Mazoyer, Anand Sivaramakrishnan, Mamadou N'Diaye, Olivier Fauvarque

Abstract: The imaging and spectroscopy of habitable worlds will require large-aperture space-based telescopes, to increase the collecting area and the angular resolution. These large telescopes will necessarily use segmented primaries to fit in a rocket. However, these massively segmented mirrors make high-contrast performance very difficult to achieve and stabilize, compared to more common monolithic prima… ▽ More The imaging and spectroscopy of habitable worlds will require large-aperture space-based telescopes, to increase the collecting area and the angular resolution. These large telescopes will necessarily use segmented primaries to fit in a rocket. However, these massively segmented mirrors make high-contrast performance very difficult to achieve and stabilize, compared to more common monolithic primaries. Despite space telescopes operating in a friendlier environment than ground-based telescopes, remaining vibrations and resonant modes on the segments can still deteriorate the performance. In this context, we present the Pair-based Analytical model for Segmented Telescopes Imaging from Space (PASTIS) that enables the establishment of a comprehensive error budget, both in term of segment alignment and stability. Using this model, one may evaluate the influence of the segment cophasing and surface quality evolution on the final images and contrasts, and set up requirements for any given mission. One can also identify the dominant modes of a given geometry for a given coronagraphic instrument and design the feedback control systems accordingly. In this paper, we first develop and validate this analytical model by comparing its outputs to the images and contrasts predicted by an end-to-end simulation. We show that the contrasts predicted using PASTIS are accurate enough compared to the end-to-end propagation results, at the exo-Earth detection level. Second, we develop a method for a fast and efficient error budget in term of segment manufacturing and alignment that takes into account the disparities of the segment effects on the final performance. This technique is then applied on a specific aperture to provide static and quasi-static requirements on each segment for local aberrations. Finally we discuss potential application of this new technique to future missions. △ Less

Submitted 4 July, 2018; v1 submitted 2 July, 2018; originally announced July 2018.

Comments: 22 pages, 15 figures, accepted

Journal ref: Journal of Astronomical Telescopes, Instruments, and Systems (JATIS) 2018

General formalism for Fourier based Wave Front Sensing

Authors: Olivier Fauvarque, Benoit Neichel, Thierry Fusco, Jean-François Sauvage, Orion Girault

Abstract: We introduce in this article a general formalism for Fourier based wave front sensing. To do so, we consider the filtering mask as a free parameter. Such an approach allows to unify sensors like the Pyramid Wave Front Sensor (PWFS) and the Zernike Wave Front Sensor (ZWFS). In particular, we take the opportunity to generalize this two sensors in terms of sensors' class where optical quantities as,… ▽ More We introduce in this article a general formalism for Fourier based wave front sensing. To do so, we consider the filtering mask as a free parameter. Such an approach allows to unify sensors like the Pyramid Wave Front Sensor (PWFS) and the Zernike Wave Front Sensor (ZWFS). In particular, we take the opportunity to generalize this two sensors in terms of sensors' class where optical quantities as, for instance, the apex angle for the PWFS or the depth of the Zernike mask for the ZWFS become free parameters. In order to compare all the generated sensors of this two classes thanks to common performance criteria, we firstly define a general phase-linear quantity that we call meta-intensity. Analytical developments allow then to split the perfectly phase-linear behavior of a WFS from the non-linear contributions making robust and analytic definitions of the sensitivity and the linearity range possible. Moreover, we define a new quantity called the SD factor which characterizes the trade-off between these two antagonist quantities. These developments are generalized for modulation device and polychromatic light. A non-exhaustive study is finally led on the two classes allowing to retrieve the usual results and also make explicit the influence of the optical parameters introduced above. △ Less

Submitted 1 December, 2016; v1 submitted 9 November, 2016; originally announced November 2016.

Journal ref: Optica, Vol. 3, No. 12, December 2016

General formalism for Fourier based Wave Front Sensing: application to the Pyramid wave front sensors

Authors: Olivier Fauvarque, Benoit Neichel, Thierry Fusco, Jean-François Sauvage, Orion Giraut

Abstract: In this article, we compare a set of Wave Front Sensors (WFS) based on Fourier filtering technique. In particular, this study explores the "class of pyramidal WFS" defined as the 4 faces pyramid WFS, all its recent variations (6, 8 faces, the flattened PWFS, etc.) and also some new WFSs as the flattened cone WFS or the 3 faces pyramid WFS. In the first part, we describe such a sensors class thanks… ▽ More In this article, we compare a set of Wave Front Sensors (WFS) based on Fourier filtering technique. In particular, this study explores the "class of pyramidal WFS" defined as the 4 faces pyramid WFS, all its recent variations (6, 8 faces, the flattened PWFS, etc.) and also some new WFSs as the flattened cone WFS or the 3 faces pyramid WFS. In the first part, we describe such a sensors class thanks to the optical parameters of the Fourier filtering mask and the modulation parameters. In the second part, we use the unified formalism to create a set of performance criteria: size of the signal on the detector, efficiency of incoming flux, sensitivity, linear range and chromaticity. In the third part, we show the influence of the previous optical and modulation parameters on these performance criteria. This exhaustive study allows to know how to optimize the sensor regarding to performance specifications. We show in particular that the number of faces has influence on the number of pixels required to do the wave front sensing but no influence on the sensitivity and linearity range. To modify these criteria, we show that the modulation radius and the apex angle are much more relevant. Moreover we observe that the time spent on edges or faces during a modulation cycle allows to adjust the trade-off between sensitivity and linearity range. △ Less

Submitted 9 March, 2017; v1 submitted 12 July, 2016; originally announced July 2016.

Journal ref: J. Astron. Telesc. Instrum. Syst. 3(1), 019001 (2017)

Variation around a Pyramid theme: optical recombination and optimal use of photons

Authors: O. Fauvarque, B. Neichel, T. Fusco, J. F. Sauvage

Abstract: We propose a new type of Wave Front Sensor (WFS) derived from the Pyramid WFS (PWFS). This new WFS, called the Flattened Pyramid-WFS (FPWFS), has a reduced Pyramid angle in order to optically overlap the four pupil images into an unique intensity. This map is then used to derive the phase information. In this letter this new WFS is compared to three existing WFSs, namely the PWFS, the Modulated PW… ▽ More We propose a new type of Wave Front Sensor (WFS) derived from the Pyramid WFS (PWFS). This new WFS, called the Flattened Pyramid-WFS (FPWFS), has a reduced Pyramid angle in order to optically overlap the four pupil images into an unique intensity. This map is then used to derive the phase information. In this letter this new WFS is compared to three existing WFSs, namely the PWFS, the Modulated PWFS (MPWFS) and the Zernike WFS (ZWFS) following tests about sensitivity, linearity range and low photon flux behavior. The FPWFS turns out to be more linear than a modulated pyramid for the high-spatial order aberrations but it provides an improved sensitivity compared to the non-modulated pyramid. The noise propagation may even be as low as the ZWFS for some given radial orders. Furthermore, the pixel arrangement being more efficient than for the PWFS, the FPWFS seems particularly well suited for high-contrast applications. △ Less

Submitted 5 August, 2015; v1 submitted 27 July, 2015; originally announced July 2015.

Comments: 4 pages, 4 figures, accepted for publication in Optics Letters - Version corrected for affiliations

Journal ref: Vol. 40, No. 15, August 1 2015, Optics Letters

Enhanced Magnetic Compressibility and Isotropic Scale-Invariance at Sub-Ion Larmor Scales in Solar Wind Turbulence

Authors: Khurom H. Kiyani, Sandra C. Chapman, Fouad Sahraoui, Bogdan Hnat, Olivier Fauvarque, Yuri V. Khotyaintsev

Abstract: The anisotropic nature of solar wind magnetic turbulence fluctuations is investigated scale-by-scale using high cadence in-situ magnetic field measurements from the Cluster and ACE spacecraft missions. The data span five decades in scales from the inertial range to the electron Larmor radius. In contrast to the inertial range, there is a successive increase towards isotropy between parallel and tr… ▽ More The anisotropic nature of solar wind magnetic turbulence fluctuations is investigated scale-by-scale using high cadence in-situ magnetic field measurements from the Cluster and ACE spacecraft missions. The data span five decades in scales from the inertial range to the electron Larmor radius. In contrast to the inertial range, there is a successive increase towards isotropy between parallel and transverse power at scales below the ion Larmor radius, with isotropy being achieved at the electron Larmor radius. In the context of wave-mediated theories of turbulence, we show that this enhancement in magnetic fluctuations parallel to the local mean background field is qualitatively consistent with the magnetic compressibility signature of kinetic Alfven wave solutions of the linearized Vlasov equation. More generally, we discuss how these results may arise naturally due to the prominent role of the Hall term at sub-ion Larmor scales. Furthermore, computing higher-order statistics, we show that the full statistical signature of the fluctuations at scales below the ion Larmor radius is that of a single isotropic globally scale-invariant process distinct from the anisotropic statistics of the inertial range. △ Less

Submitted 24 July, 2012; v1 submitted 3 August, 2010; originally announced August 2010.

Comments: 13 pages, 6 figures, submitted to The Astrophysical Journal (manuscript number: ApJ88636)

Journal ref: ApJ 763, 10 (2013)