-
Ultrathin, sputter-deposited, amorphous alloy films of ruthenium and molybdenum
Authors:
G. Yetik,
A. Troglia,
S. Farokhipoor,
S. van Vliet,
J. Momand,
B. J. Kooi,
R. Bliem,
J. W. M. Frenken
Abstract:
Microscopy and diffraction measurements are presented of ultrathin binary alloy films of ruthenium and molybdenum that are obtained by standard sputter deposition. For compositions close to Ru50Mo50, we find the films to be amorphous. The amorphicity of the films is accompanied by a significant reduction of the roughness with respect to the roughness of equally thick films of either ruthenium or m…
▽ More
Microscopy and diffraction measurements are presented of ultrathin binary alloy films of ruthenium and molybdenum that are obtained by standard sputter deposition. For compositions close to Ru50Mo50, we find the films to be amorphous. The amorphicity of the films is accompanied by a significant reduction of the roughness with respect to the roughness of equally thick films of either ruthenium or molybdenum. We ascribe this to the absence of the grain structure that is characteristic of the polycrystalline films of the separate elements.
△ Less
Submitted 17 August, 2022; v1 submitted 8 April, 2022;
originally announced April 2022.
-
Patterning enhanced tetragonality in BiFeO3 thin films with effective negative pressure by helium implantation
Authors:
C. Toulouse,
J. Fischer,
S. Farokhipoor,
L. Yedra,
F. Carla,
A. Jarnac,
E. Elkaim,
P. Fertey,
J. -N. Audinot,
T. Wirtz,
B. Noheda,
V. Garcia,
S. Fusil,
I. Peral Alonso,
M. Guennou,
J. Kreisel
Abstract:
Helium implantation in epitaxial thin films is a way to control the out-of-plane deformation independently from the in-plane strain controlled by epitaxy. In particular, implantation by means of a helium microscope allows for local implantation and patterning down to the nanometer resolution, which is of interest for device applications. We present here a study of bismuth ferrite (BiFeO3) films wh…
▽ More
Helium implantation in epitaxial thin films is a way to control the out-of-plane deformation independently from the in-plane strain controlled by epitaxy. In particular, implantation by means of a helium microscope allows for local implantation and patterning down to the nanometer resolution, which is of interest for device applications. We present here a study of bismuth ferrite (BiFeO3) films where strain was patterned locally by helium implantation. Our combined Raman, XRD and TEM study shows that the implantation causes an elongation of the BiFeO3 unit cell and ultimately a transition towards the so-called super-tetragonal polymorph via states with mixed phases. In addition, TEM reveals the onset of amorphization at a threshold dose that does not seem to impede the overall increase in tetragonality. The phase transition from the R-like to T-like BiFeO3 appears as first-order in character, with regions of phase coexistence and abrupt changes in lattice parameters.
△ Less
Submitted 15 February, 2021;
originally announced February 2021.
-
Large magnetoelectric coupling in multiferroic oxide heterostructures assembled via epitaxial lift-off
Authors:
David Pesquera,
Ekaterina Khestanova,
Massimo Ghidini,
Sen Zhang,
Aidan P. Rooney,
Francesco Maccherozzi,
Patricia Riego,
Saeedeh Farokhipoor,
Jiyeob Kim,
Xavier Moya,
Mary E. Vickers,
Nadia A. Stelmashenko,
Sarah J. Haigh,
Sarnjeet S. Dhesi,
Neil D. Mathur
Abstract:
The strain dependent functional properties of epitaxial transition metal oxide films can be significantly modified via substrate selection. However, large lattice mismatches preclude dislocation-free epitaxial growth on ferroelectric substrates, whose strain states are modified by applied electric fields. Here we overcome this mismatch problem by depositing an epitaxial film of ferromagnetic La0.7…
▽ More
The strain dependent functional properties of epitaxial transition metal oxide films can be significantly modified via substrate selection. However, large lattice mismatches preclude dislocation-free epitaxial growth on ferroelectric substrates, whose strain states are modified by applied electric fields. Here we overcome this mismatch problem by depositing an epitaxial film of ferromagnetic La0.7Sr0.3MnO3 on a single crystal substrate of well lattice matched SrTiO3 via a film of SrRuO3 that we subsequently dissolved, permitting the transfer of unstrained La0.7Sr0.3MnO3 to a ferroelectric substrate of 0.68Pb(Mg1/3Nb2/3)O3 0.32PbTiO3 in a different crystallographic orientation. Ferroelectric domain switching, and a concomitant ferroelectric phase transition, produced large non volatile changes of magnetization that were mediated by magnetic domain rotations at locations defined by the microstructure - as revealed via high resolution vector maps of magnetization constructed from photoemission electron microscopy data, with contrast from x-ray magnetic circular dichroism. In future, our method may be exploited to control functional properties in dislocation free epitaxial films of any composition.
△ Less
Submitted 2 June, 2020; v1 submitted 29 May, 2020;
originally announced June 2020.
-
Tunable resistivity exponents in the metallic phase of epitaxial nickelates
Authors:
Qikai Guo,
Saeedeh Farokhipoor,
César Magén,
Francisco Rivadulla,
Beatriz Noheda
Abstract:
We report a detailed analysis of the electrical resistivity exponent of thin films of NdNiO3 as a function of epitaxial strain. Strain-free thin-films show a linear dependence of the resistivity vs temperature, consistent with a classical Fermi gas ruled by electron-phonon interactions. In addition, the apparent temperature exponent, n, can be tuned with the epitaxial strain between n= 1 and n= 3.…
▽ More
We report a detailed analysis of the electrical resistivity exponent of thin films of NdNiO3 as a function of epitaxial strain. Strain-free thin-films show a linear dependence of the resistivity vs temperature, consistent with a classical Fermi gas ruled by electron-phonon interactions. In addition, the apparent temperature exponent, n, can be tuned with the epitaxial strain between n= 1 and n= 3. We discuss the critical role played by quenched random disorder in the value of n. Our work shows that the assignment of Fermi/Non-Fermi liquid behaviour based on experimentally obtained resistivity exponents requires an in-depth analysis of the degree of disorder in the material.
△ Less
Submitted 13 September, 2019;
originally announced September 2019.
-
Resistive switching in ferroelectric BiFeO3 by 1.7 eV change of the Schottky barrier height
Authors:
Saeedeh Farokhipoor,
Beatriz Noheda
Abstract:
Using metal-ferroelectric junctions as switchable diodes was proposed several decades ago. This was shown to actually work in PbZr(1-x)TixO3 (PZT) by Blom et al. [P.W. M. Blom et al., Phys. Rev. Lett. 73, 2107 (1994)], who reported switching in the rectification direction and changes of the current of about 2 orders of magnitude upon switching the polarization direction of the ferroelectric layer.…
▽ More
Using metal-ferroelectric junctions as switchable diodes was proposed several decades ago. This was shown to actually work in PbZr(1-x)TixO3 (PZT) by Blom et al. [P.W. M. Blom et al., Phys. Rev. Lett. 73, 2107 (1994)], who reported switching in the rectification direction and changes of the current of about 2 orders of magnitude upon switching the polarization direction of the ferroelectric layer. This form of resistive switching enables the read out of a ferroelectric memory state at higher speed compared to the capacitive design, without destroying the information in each reading cycle. Recently, Jiang and coworkers have shown that these Schottky barrier effects are enormous in BiFeO3, giving thousand times more switched charge than found by in PZT [A.Q. Jiang. et al., Adv. Mat. 23, 1277 (2011)]. Here, by performing local conductivity measurements, we attribute this to a large change of the Schottky barrier height between the as-grown, down-polarized domains and the up-polarized domains. These measurements allow to estimate the relative effect of polarization charges and screening charges on the conduction through the ferroelectric.
△ Less
Submitted 3 December, 2012;
originally announced December 2012.
-
Local conductivity and the role of vacancies around twin walls of (001)-BiFeO3 thin films
Authors:
S. Farokhipoor,
B. Noheda
Abstract:
BiFeO3 thin films epitaxially grown on SrRuO3-buffered (001)-oriented SrTiO3 substrates show orthogonal bundles of twin domains, each of which contains parallel and periodic 71o domain walls. A smaller amount of 109o domain walls are also present at the boundaries between two adjacent bundles. All as-grown twin walls display enhanced conductivity with respect to the domains during local probe meas…
▽ More
BiFeO3 thin films epitaxially grown on SrRuO3-buffered (001)-oriented SrTiO3 substrates show orthogonal bundles of twin domains, each of which contains parallel and periodic 71o domain walls. A smaller amount of 109o domain walls are also present at the boundaries between two adjacent bundles. All as-grown twin walls display enhanced conductivity with respect to the domains during local probe measurements, due to the selective lowering of the Schottky barrier between the film and the AFM tip (see S. Farokhipoor and B. Noheda, Phys. Rev. Lett. 107, 127601 (2011)). In this paper we further discuss these results and show why other conduction mechanisms are discarded. In addition we show the crucial role that oxygen vacancies play in determining the amount of conduction at the walls. This prompts us to propose that the oxygen vacancies migrating to the walls locally lower the Schottky barrier. This mechanism would then be less efficient in non-ferroelastic domain walls where one expects no strain gradients around the walls and thus (assuming that walls are not charged) no driving force for accumulation of defects.
△ Less
Submitted 30 December, 2011;
originally announced January 2012.
-
Conduction through 71o domain walls in BiFeO3 thin films
Authors:
S. Farokhipoor,
B. Noheda
Abstract:
Local conduction at domains and domains walls is investigated in BiFeO3 thin films containing mostly 71o domain walls. Measurements at room temperature reveal conduction through 71o domain walls. Conduction through domains could also be observed at high enough temperatures. It is found that, despite the lower conductivity of the domains, both are governed by the same mechanisms: in the low voltage…
▽ More
Local conduction at domains and domains walls is investigated in BiFeO3 thin films containing mostly 71o domain walls. Measurements at room temperature reveal conduction through 71o domain walls. Conduction through domains could also be observed at high enough temperatures. It is found that, despite the lower conductivity of the domains, both are governed by the same mechanisms: in the low voltage regime electrons trapped at defect states are temperature-activated but the current is limited by the ferroelectric surface charges; in the large voltage regime, Schottky emission takes place and the role of oxygen vacancies is that of selectively increasing the Fermi energy at the walls and locally reducing the Schottky barrier. This understanding provides the key to engineering conduction paths in oxides.
△ Less
Submitted 16 April, 2011;
originally announced April 2011.
-
Tuning the atomic and domain structure of epitaxial films of multiferroic BiFeO3
Authors:
C. J. M. Daumont,
S. Farokhipoor,
A. Ferri,
J. C. Wojdel,
Jorge Iniguez,
B. J. Kooi,
B. Noheda
Abstract:
Recent works have shown that the domain walls of room-temperature multiferroic BiFeO3 (BFO) thin films can display distinct and promising functionalities. It is thus important to understand the mechanisms underlying domain formation in these films. High-resolution x-ray diffraction and piezo-force microscopy, combined with first-principles simulations, have allowed us to characterize both the at…
▽ More
Recent works have shown that the domain walls of room-temperature multiferroic BiFeO3 (BFO) thin films can display distinct and promising functionalities. It is thus important to understand the mechanisms underlying domain formation in these films. High-resolution x-ray diffraction and piezo-force microscopy, combined with first-principles simulations, have allowed us to characterize both the atomic and domain structure of BFO films grown under compressive strain on (001)-SrTiO3, as a function of thickness. We derive a twining model that describes the experimental observations and explains why the 71o domain walls are the ones commonly observed in these films. This understanding provides us with a new degree of freedom to control the structure and, thus, the properties of BiFeO3 thin films.
△ Less
Submitted 23 November, 2009;
originally announced November 2009.