-
What is the speed limit of martensitic transformations?
Authors:
Stefan Schwabe,
Klara Lünser,
Daniel Schmidt,
Kornelius Nielsch,
Peter Gaal,
Sebastian Fähler
Abstract:
Structural martensitic transformations enable various applications, which range from high stroke actuation and sensing to energy efficient magnetocaloric refrigeration and thermomagnetic energy harvesting. All these emerging applications benefit from a fast transformation, but up to now the speed limit of martensitic transformations has not been explored. Here, we demonstrate that a martensite to…
▽ More
Structural martensitic transformations enable various applications, which range from high stroke actuation and sensing to energy efficient magnetocaloric refrigeration and thermomagnetic energy harvesting. All these emerging applications benefit from a fast transformation, but up to now the speed limit of martensitic transformations has not been explored. Here, we demonstrate that a martensite to austenite transformation can be completed in under ten nanoseconds. We heat an epitaxial Ni-Mn-Ga film with a laser pulse and use synchrotron diffraction to probe the influence of initial sample temperature and overheating on transformation rate and ratio. We demonstrate that an increase of thermal energy drives this transformation faster. Though the observed speed limit of 2.5 x 10^{27} (Js)^{-1} per unit cell leaves plenty of room for a further acceleration of applications, our analysis reveals that the practical limit will be the energy required for switching. Our experiments unveil that martensitic transformations obey similar speed limits as in microelectronics, which are expressed by the Margolus-Levitin theorem.
△ Less
Submitted 14 September, 2022; v1 submitted 25 February, 2022;
originally announced February 2022.
-
Building hierarchical martensite
Authors:
Stefan Schwabe,
Robert Niemann,
Anja Backen,
Daniel Wolf,
Christine Damm,
Tina Walter,
Hanus Seiner,
Oleg Heczko,
Kornelius Nielsch,
Sebastian Fähler
Abstract:
Martensitic materials show a complex, hierarchical microstructure containing structural domains separated by various types of twin boundaries. Several concepts exist to describe this microstructure on each length scale, however, there is no comprehensive approach bridging the whole range from the nano- up to the macroscopic scale. Here, we describe for a Ni-Mn-based Heusler alloy how this hierarch…
▽ More
Martensitic materials show a complex, hierarchical microstructure containing structural domains separated by various types of twin boundaries. Several concepts exist to describe this microstructure on each length scale, however, there is no comprehensive approach bridging the whole range from the nano- up to the macroscopic scale. Here, we describe for a Ni-Mn-based Heusler alloy how this hierarchical microstructure is built from scratch with just one key parameter: the tetragonal distortion of the basic building block at the atomic level. Based on this initial block, we introduce five successive levels of nested building blocks. At each level, a larger building block is formed by twinning the preceding one to minimise the relevant energy contributions locally. This naturally explains the occurrence of different types of twin boundaries. We compare this scale-bridging approach of nested building blocks with experiments in real and reciprocal space. Our approach of nested building blocks is versatile as it can be applied to the broad class of functional materials exhibiting diffusionless transformations.
△ Less
Submitted 21 April, 2020;
originally announced April 2020.
-
Efficient and affordable thermomagnetic materials for harvesting low grade waste heat
Authors:
Daniel Dzekan,
Anja Waske,
Kornelius Nielsch,
Sebastian Fähler
Abstract:
Industrial processes release substantial quantities of waste heat, which can be harvested to generate electricity. At present, the conversion of low grade waste heat to electricity relies solely on thermoelectric materials, but such materials are expensive and have low thermodynamic efficiencies. Although thermomagnetic materials may offer a promising alternative, their performance remains to be e…
▽ More
Industrial processes release substantial quantities of waste heat, which can be harvested to generate electricity. At present, the conversion of low grade waste heat to electricity relies solely on thermoelectric materials, but such materials are expensive and have low thermodynamic efficiencies. Although thermomagnetic materials may offer a promising alternative, their performance remains to be evaluated, thereby hindering their real-world application. Here we evaluate the efficiency and cost effectiveness of thermomagnetic materials that can be used in motors, oscillators and generators for converting waste heat to electricity. Our analysis reveals that up to temperature differences of several 10 K the best thermomagnetic materials outperform thermoelectric materials. Importantly, we find that the price per watt for some thermomagnetic materials are much lower compared to present-day thermoelectrics and can become competitive with conventional power plants. The materials library that we present here enables the selection of the best available thermomagnetic materials for harvesting waste heat and gives guidelines for their future development.
△ Less
Submitted 27 April, 2020; v1 submitted 10 January, 2020;
originally announced January 2020.
-
Reversible tuning of magnetocaloric Ni-Mn-Ga-Co films on ferroelectric PMN-PT substrates
Authors:
Benjamin Schleicher,
Robert Niemann,
Stefan Schwabe,
Ruben Hühne,
Ludwig Schultz,
Kornelius Nielsch,
Sebastian Fähler
Abstract:
Tuning functional properties of thin caloric films by mechanical stress is currently of high interest. In particular, a controllable magnetisation or transition temperature is desired for improved usability in magnetocaloric devices. Here, we present results of epitaxial magnetocaloric Ni-Mn-Ga-Co thin films on ferroelectric Pb(Mg$_{1/3}$Nb$_{2/3}$)$_{0.72}$Ti$_{0.28}$O$_3$ (PMN-PT) substrates. Ut…
▽ More
Tuning functional properties of thin caloric films by mechanical stress is currently of high interest. In particular, a controllable magnetisation or transition temperature is desired for improved usability in magnetocaloric devices. Here, we present results of epitaxial magnetocaloric Ni-Mn-Ga-Co thin films on ferroelectric Pb(Mg$_{1/3}$Nb$_{2/3}$)$_{0.72}$Ti$_{0.28}$O$_3$ (PMN-PT) substrates. Utilizing X-ray diffraction measurements, we demonstrate that the strain induced in the substrate by application of an electric field can be transferred to the thin film, resulting in a change of the lattice parameters. We examined the consequences of this strain on the magnetic properties of the thin film by temperature and electric field dependent measurements. We did not observe a change of martensitic transformation temperature but a reversible change of magnetisation within the austenitic state, which we attribute to the intrinsic magnetic instability of this metamagnetic Heusler alloy.
△ Less
Submitted 27 July, 2017;
originally announced July 2017.
-
Nucleation and growth of hierarchical martensite in epitaxial shape memory films
Authors:
Robert Niemann,
Anja Backen,
Sandra Kauffmann-Weiss,
Christian Behler,
Ulrich K. Rößler,
Hanus Seiner,
Oleg Heczko,
Kornelius Nielsch,
Ludwig Schultz,
Sebastian Fähler
Abstract:
Shape memory alloys often show a complex hierarchical morphology in the martensitic state. To understand the formation of this twin-within-twins microstructure, we examine epitaxial Ni-Mn-Ga films as a model system. In-situ scanning electron microscopy experiments show beautiful complex twinning patterns with a number of different mesoscopic twin boundaries and macroscopic twin boundaries between…
▽ More
Shape memory alloys often show a complex hierarchical morphology in the martensitic state. To understand the formation of this twin-within-twins microstructure, we examine epitaxial Ni-Mn-Ga films as a model system. In-situ scanning electron microscopy experiments show beautiful complex twinning patterns with a number of different mesoscopic twin boundaries and macroscopic twin boundaries between already twinned regions. We explain the appearance and geometry of these patterns by constructing an internally twinned martensitic nucleus, which can take the shape of a diamond or a parallelogram, within the basic phenomenological theory of martensite. These nucleus contains already the seeds of different possible mesoscopic twin boundaries. Nucleation and growth of these nuclei determines the creation of the hierarchical space-filling martensitic microstructure. This is in contrast to previous approaches to explain a hierarchical martensitic microstructure. This new picture of creation and anisotropic, well-oriented growth of twinned martensitic nuclei explains the morphology and exact geometrical features of our experimentally observed twins-within-twins microstructure on the meso- and macroscopic scale.
△ Less
Submitted 17 January, 2017;
originally announced January 2017.
-
Modulations in martensitic Heusler alloys originate from nanotwin ordering
Authors:
Markus E. Gruner,
Robert Niemann,
Peter Entel,
Rossitza Pentcheva,
Ulrich K. Rössler,
Kornelius Nielsch,
Sebastian Fähler
Abstract:
Heusler alloys exhibiting magnetic and martensitic transitions enable applications like magnetocaloric refrigeration and actuation based on the magnetic shape memory effect. Their outstanding functional properties depend on low hysteresis losses and low actuation fields. These are only achieved if the atomic positions deviate from a tetragonal lattice by periodic displacements. The origin of the s…
▽ More
Heusler alloys exhibiting magnetic and martensitic transitions enable applications like magnetocaloric refrigeration and actuation based on the magnetic shape memory effect. Their outstanding functional properties depend on low hysteresis losses and low actuation fields. These are only achieved if the atomic positions deviate from a tetragonal lattice by periodic displacements. The origin of the so-called modulated structures is the subject of much controversy: They are either explained by phonon softening or adaptive nanotwinning. Here we used large-scale density functional theory calculations on the Ni2MnGa prototype system to demonstrate interaction energy between twin boundaries. Minimizing the interaction energy resulted in the experimentally observed ordered modulations at the atomic scale, it explained that a/b twin boundaries are stacking faults at the mesoscale, and contributed substantially to the macroscopic hysteresis losses. Furthermore, we found that phonon softening paves the transformation path towards the nanotwinned martensite state. This unified both opposing concepts to explain modulated martensite.
△ Less
Submitted 1 February, 2017; v1 submitted 6 January, 2017;
originally announced January 2017.
-
Growth, microstructure and thermal transformation behaviour of epitaxial Ni-Ti films
Authors:
Sandra Kauffmann-Weiss,
Sandra Hahn,
Carmen Weigelt,
Ludwig Schultz,
Martin F. -X. Wagner,
Sebastian Fähler
Abstract:
Epitaxial films have the potential to be used as model systems for fundamental investigations on the martensitic transformation in binary NiTi. In this paper, we discuss growth of binary NiTi thin films on single crystalline MgO substrates. Sputter deposition is used to grow NiTi films. Films prepared by complementary preparation routes (with different deposition temperatures and subsequent heat t…
▽ More
Epitaxial films have the potential to be used as model systems for fundamental investigations on the martensitic transformation in binary NiTi. In this paper, we discuss growth of binary NiTi thin films on single crystalline MgO substrates. Sputter deposition is used to grow NiTi films. Films prepared by complementary preparation routes (with different deposition temperatures and subsequent heat treatments) are investigated by X-ray diffraction, electron microscopy, atomic force microscopy, and electrical resistivity measurements, with the aim of optimizing film properties, particularly to obtain a well defined orientation of the austenitic unit cell and smooth surfaces. Our results show that deposition at elevated temperatures and carefully controlled subsequent heat treatments allow to produce epitaxially grown and smooth NiTi films that exhibit reversible one- or two-step martensitic transformations.
△ Less
Submitted 21 December, 2016;
originally announced December 2016.
-
Geometry of Adaptive Martensite in Ni-Mn-based Heusler alloys
Authors:
Robert Niemann,
Sebastian Fähler
Abstract:
Modulated martensites play an important role in magnetic shape memory alloys, because all functional properties are closely connected to the twin microstructure and the phase boundary. The nature of the modulated martensites is still unclear. One approach is the concept of adaptive martensite, which regards all modulated phases as nanotwinned microstructures. In this article, we use the Ni-Mn-base…
▽ More
Modulated martensites play an important role in magnetic shape memory alloys, because all functional properties are closely connected to the twin microstructure and the phase boundary. The nature of the modulated martensites is still unclear. One approach is the concept of adaptive martensite, which regards all modulated phases as nanotwinned microstructures. In this article, we use the Ni-Mn-based shape memory alloys as an example to show the geometric rationale behind this concept using analytic equations based on the phenomenological theory of martensite. This could enhance discussions about the implications of the adaptive martensite by showing the exact relations between the various unit cells used to describe the structure. We use the concept to discuss the compatibility at the habit plane, the nature of high-order twin boundaries and the dependence of the lattice constants on the different types of modulation.
△ Less
Submitted 9 January, 2017; v1 submitted 8 November, 2016;
originally announced November 2016.
-
On the origin of perpendicular magnetic anisotropy in strained Fe-Co(-X) films
Authors:
Ludwig Reichel,
Alexander Edström,
Darius Pohl,
Jan Rusz,
Olle Eriksson,
Ludwig Schultz,
Sebastian Fähler
Abstract:
Very high magnetic anisotropies have been theoretically predicted for strained Fe-Co(-X) and indeed several experiments on epitaxial thin films seemed to confirm strain induced anisotropy enhancement. This study presents a critical analysis of the different contributions to perpendicular anisotropy: volume, interface and surface anisotropies. Tracing these contributions, thickness series of single…
▽ More
Very high magnetic anisotropies have been theoretically predicted for strained Fe-Co(-X) and indeed several experiments on epitaxial thin films seemed to confirm strain induced anisotropy enhancement. This study presents a critical analysis of the different contributions to perpendicular anisotropy: volume, interface and surface anisotropies. Tracing these contributions, thickness series of single layer films as well as multilayers with Au-Cu buffers/interlayers of different lattice parameters have been prepared. The analysis of their magnetic anisotropy reveals a negligible influence of the lattice parameter of the buffer. Electronic effects, originating from both, the Au-Cu interface and the film surface, outrange the elastic effects. Surface anisotropy, however, exceeds the interface anisotropy by more than a factor of three. A comparison with results from Density Functional Theory suggests, that the experimentally observed strong perpendicular surface anisotropy originates from a deviation from an ideal oxide-free surface. Accordingly, tailored Fe-Co-X/oxide interfaces may open a route towards high anisotropy in rare-earth free materials.
△ Less
Submitted 20 December, 2016; v1 submitted 9 September, 2016;
originally announced September 2016.
-
Enhanced and Tunable Spin-Orbit Coupling in Tetragonally Strained Fe-Co-B Films
Authors:
Ruslan Salikhov,
Ludwig Reichel,
Benjamin Zingsem,
Florian M. Römer,
Radu-Marius Abrudan,
Jan Rusz,
Olle Eriksson,
Ludwig Schultz,
Sebastian Fähler,
Michael Farle,
Ulf Wiedwald
Abstract:
We have synthesized 20 nm thick films of tetragonally strained interstitial Fe-Co-B alloys epitaxially grown on Au55Cu45 buffer layer. The strained axis is perpendicular to the film plane and the corresponding lattice constant c is enlarged with respect to the in-plane lattice parameter a. By adding the interstitial boron with different concentrations 0, 4, and 10 at.% we were able to stabilize th…
▽ More
We have synthesized 20 nm thick films of tetragonally strained interstitial Fe-Co-B alloys epitaxially grown on Au55Cu45 buffer layer. The strained axis is perpendicular to the film plane and the corresponding lattice constant c is enlarged with respect to the in-plane lattice parameter a. By adding the interstitial boron with different concentrations 0, 4, and 10 at.% we were able to stabilize the tetragonal strain in 20 nm Fe-Co films with different c/a ratios of 1.013, 1.034 and 1.02, respectively. Using ferromagnetic resonance (FMR) and x-ray magnetic circular dichroism (XMCD) we found that the orbital magnetic moment increases with increasing the c/a ratio, pointing towards the enhancement of spin-orbit coupling (SOC) at larger strain. Our results show that careful do** of ferromagnetic films allows to control the SOC by stabilizing anisotropic strain states. These findings are applicable in material design for spintronics applications. We also discuss the influence of B do** on the Fe-Co film microstructure, its magnetic properties and magnetic relaxation.
△ Less
Submitted 9 October, 2015;
originally announced October 2015.
-
From soft to hard magnetic Fe-Co-B by spontaneous strain: A combined first principle and thin film study
Authors:
Ludwig Reichel,
Ludwig Schultz,
Darius Pohl,
Steffen Oswald,
Sebastian Fähler,
Miroslaw Werwinski,
Alexander Edström,
Erna K. Delczeg-Czirjak,
Jan Rusz
Abstract:
In order to convert the well-known Fe-Co-B alloy from a soft to a hard magnet, we propose tetragonal strain by interstitial boron. Density functional theory reveals that when B atoms occupy octahedral interstitial sites, the bcc Fe-Co lattice is strained spontaneously. Such highly distorted Fe-Co is predicted to reach a strong magnetocrystalline anisotropy which may compete with shape anisotropy.…
▽ More
In order to convert the well-known Fe-Co-B alloy from a soft to a hard magnet, we propose tetragonal strain by interstitial boron. Density functional theory reveals that when B atoms occupy octahedral interstitial sites, the bcc Fe-Co lattice is strained spontaneously. Such highly distorted Fe-Co is predicted to reach a strong magnetocrystalline anisotropy which may compete with shape anisotropy. Probing this theoretical suggestion experimentally, epitaxial films are examined. A spontaneous strain up to 5 % lattice distortion is obtained for B contents up to 4 at%, which leads to uniaxial anisotropy constants exceeding 0.5 MJ/m^3. However, a further addition of B results in a partial amorphization, which degrades both anisotropy and magnetization.
△ Less
Submitted 14 September, 2015;
originally announced September 2015.
-
Increased magnetocrystalline anisotropy in epitaxial Fe-Co-C thin films with spontaneous strain
Authors:
Ludwig Reichel,
George Giannopoulos,
Sandra Kauffmann-Weiss,
Martin Hoffmann,
Darius Pohl,
Alexander Edström,
Steffen Oswald,
Dimitris Niarchos,
Jan Rusz,
Ludwig Schultz,
Sebastian Fähler
Abstract:
Rare earth free alloys are in focus of permanent magnet research since the accessibility of the elements needed for nowadays conventional magnets is limited. Tetragonally strained iron-cobalt (Fe-Co) has attracted large interest as promising candidate due to theoretical calculations. In experiments, however, the applied strain quickly relaxes with increasing film thickness and hampers stabilizatio…
▽ More
Rare earth free alloys are in focus of permanent magnet research since the accessibility of the elements needed for nowadays conventional magnets is limited. Tetragonally strained iron-cobalt (Fe-Co) has attracted large interest as promising candidate due to theoretical calculations. In experiments, however, the applied strain quickly relaxes with increasing film thickness and hampers stabilization of a strong magnetocrystalline anisotropy. In our study we show that already 2 at% of carbon substantially reduce the lattice relaxation leading to the formation of a spontaneously strained phase with 3 % tetragonal distortion. In these strained (Fe$_{0.4}$Co$_{0.6}$)$_{0.98}$C$_{0.02}$ films, a magnetocrystalline anisotropy above 0.4 MJ/m$^3$ is observed while the large polarization of 2.1 T is maintained. Compared to binary Fe-Co this is a remarkable improvement of the intrinsic magnetic properties. In this paper, we relate our experimental work to theoretical studies of strained Fe-Co-C and find a very good agreement.
△ Less
Submitted 17 September, 2014;
originally announced September 2014.
-
First-principles calculation of the instability leading to giant inverse magnetocaloric efects
Authors:
Denis Comtesse,
Markus E. Gruner,
Vladimir V. Sokolovskiy,
Vasiliy D. Buchelnikov,
Anna Grünebohm,
Raymundo Arroyave,
Navdeep Singh,
Tino Gottschall,
Oliver Gutfleisch,
Volodymyr Chernenko,
Franca Albertini,
Sebastian Fähler,
Peter Entel
Abstract:
The structural and magnetic properties of functional Ni-Mn-Z (Z = Ga, In, Sn) Heusler alloys are studied by first-principles and Monte Carlo methods. The \textit{ab initio} calculations give a basic understanding of the underlying physics which is associated with the strong competition of ferro- and antiferromagnetic interactions with increasing chemical disorder. The resulting $d$-electron orbita…
▽ More
The structural and magnetic properties of functional Ni-Mn-Z (Z = Ga, In, Sn) Heusler alloys are studied by first-principles and Monte Carlo methods. The \textit{ab initio} calculations give a basic understanding of the underlying physics which is associated with the strong competition of ferro- and antiferromagnetic interactions with increasing chemical disorder. The resulting $d$-electron orbital dependent magnetic ordering is the driving mechanism of magnetostructural instability which is accompanied by a drop of magnetization governing the size of the magnetocaloric effect. The thermodynamic properties are calculated by using the \textit{ab initio} magnetic exchange coupling constants in finite-temperature Monte Carlo simulations, which are used to accurately reproduce the experimental entropy and adiabatic temperature changes across the magnetostructural transition.
△ Less
Submitted 31 January, 2014;
originally announced January 2014.
-
Mesoscopic twin boundaries in epitaxial Ni-Mn-Ga films
Authors:
Anja Backen,
Sandra Kauffmann-Weiss,
Christian Behler,
Anett Diestel,
Robert Niemann,
Alexander Kauffmann,
Jens Freudenberger,
Ludwig Schultz,
Sebastian Fähler
Abstract:
Twin boundaries play an essential role in the use of magnetic shape memory alloy Ni-Mn-Ga as active material. Only if twin boundaries can be moved by an external magnetic field, high strain values of up to 10 % can be obtained. Therefore, understanding the observed twin microstructure of thin films is crucial for future application. We exemplarily present two different microstructural pattern, typ…
▽ More
Twin boundaries play an essential role in the use of magnetic shape memory alloy Ni-Mn-Ga as active material. Only if twin boundaries can be moved by an external magnetic field, high strain values of up to 10 % can be obtained. Therefore, understanding the observed twin microstructure of thin films is crucial for future application. We exemplarily present two different microstructural pattern, type X and type Y microstructure, using the example of two Ni-Mn-Ga films with similar film thickness and composition. The analysis of microstructure and structure of the thin films shows that both, type X and type Y pattern, are formed by mesoscopic 14M twin boundaries. The mesoscopic 14M twin boundaries are either tilted from the substrate surface in case of type X pattern or they are perpendicular to the surface for type Y pattern. Based on a recently proposed scenario for the nucleation of martensite in austenite, we can trace back the difference in twin boundary orientation to differently oriented martensitic nuclei.
△ Less
Submitted 21 November, 2013;
originally announced November 2013.
-
Magnetic domain pattern in hierarchically twinned epitaxial Ni-Mn-Ga films
Authors:
Anett Diestel,
Volker Neu,
Anja Backen,
Ludwig Schultz,
Sebastian Fähler
Abstract:
Magnetic shape memory alloys exhibit a hierarchically twinned microstructure, which has been well examined in epitaxial Ni-Mn-Ga films. Here we analyze consequences of this twin within twins microstructure on the magnetic domain pattern. Atomic and magnetic force microscopy are used to probe the correlation between the martensitic microstructure and magnetic domains. We examine consequences of dif…
▽ More
Magnetic shape memory alloys exhibit a hierarchically twinned microstructure, which has been well examined in epitaxial Ni-Mn-Ga films. Here we analyze consequences of this twin within twins microstructure on the magnetic domain pattern. Atomic and magnetic force microscopy are used to probe the correlation between the martensitic microstructure and magnetic domains. We examine consequences of different twin boundary orientations with respect to the substrate normal as well as variant boundaries between differently aligned twinned laminates. A detailed micromagnetic analysis is given which describes the influence of the finite film thickness on the formation of magnetic band domains in these multiferroic materials.
△ Less
Submitted 7 January, 2013;
originally announced January 2013.
-
Electric field control of magnetic exchange coupling
Authors:
Karin Leistner,
Juliane Wunderwald,
Norman Lange,
Steffen Oswald,
Manuel Richter,
Hongbin Zhang,
Ludwig Schultz,
Sebastian Fähler
Abstract:
Electric control of magnetism is a vision which drives intense research on magnetic semiconductors and multiferroics. Recently, also ultrathin metallic films were reported to show magnetoelectric effects at room temperature. Here we demonstrate much stronger effects by exploiting reduction/oxidation reactions in a naturally grown oxide layer exchange coupled to an underlying ferromagnet. For the e…
▽ More
Electric control of magnetism is a vision which drives intense research on magnetic semiconductors and multiferroics. Recently, also ultrathin metallic films were reported to show magnetoelectric effects at room temperature. Here we demonstrate much stronger effects by exploiting reduction/oxidation reactions in a naturally grown oxide layer exchange coupled to an underlying ferromagnet. For the exemplarily studied FePt/iron oxide composite in an electrolyte, a large and reversible change of magnetization and anisotropy is obtained. The principle can be transferred to various metal/oxide combinations. It represents a novel approach towards multifunctionality.
△ Less
Submitted 26 April, 2013; v1 submitted 12 June, 2012;
originally announced June 2012.
-
Enhancing magnetocrystalline anisotropy of the Fe70Pd30 magnetic shape memory alloy by adding Cu
Authors:
Sandra Kauffmann-Weiss,
Sven Hamann,
Markus Ernst Gruner,
Ludwig Schultz,
Alfred Ludwig,
Sebastian Fähler
Abstract:
Strained epitaxial growth provides the opportunity to understand the dependence of intrinsic and extrinsic properties of functional materials at frozen intermediate stages of a phase transformation. In this study, a combination of thin film experiments and first-principles calculations yields the binding energy and magnetic properties of tetragonal Fe70Pd30-xCux ferromagnetic shape memory thin fil…
▽ More
Strained epitaxial growth provides the opportunity to understand the dependence of intrinsic and extrinsic properties of functional materials at frozen intermediate stages of a phase transformation. In this study, a combination of thin film experiments and first-principles calculations yields the binding energy and magnetic properties of tetragonal Fe70Pd30-xCux ferromagnetic shape memory thin films with x = 0, 3, 7 and structures ranging from bcc to beyond fcc (1.07<c/a_bct<1.57). We find that Cu enhances the quality of epitaxial growth, while spontaneous polarisation and Curie temperature are only moderately lowered as expected from our calculations. Beyond c/a_bct>1.41 the samples undergo structural relaxations through adaptive nanotwinning. For all tetragonal structures, we observe a significant increase of the magnetocrystalline anisotropy constant K1, which reaches a maximum of K1=-2.4*10^5 Jm^-3 at room temperature around c/a_bct=1.33 and is thus even larger than for binary Fe70Pd30 and the prototype Ni-Mn-Ga magnetic shape memory system. Since K1 represents the driving force for variant reorientation in magnetic shape memory systems, we conclude that Fe-Pd-Cu alloys offer a promising route towards microactuators applications with significantly improved work output.
△ Less
Submitted 24 May, 2012;
originally announced May 2012.
-
Magnetic domain structure of epitaxial Ni-Mn-Ga films
Authors:
Anett Diestel,
Anja Backen,
Volker Neu,
Ludwig Schultz,
Sebastian Fähler
Abstract:
For the magnetic shape memory effect, knowledge about the interaction between martensitic and magnetic domain structure is essential. In the case of Ni-Mn-Ga bulk material and foils, a staircase-like magnetic domain structure with 90°- and 180°-domain walls is known for modulated martensite. In the present paper we show that the magnetic domain pattern of thin epitaxial films is fundamentally diff…
▽ More
For the magnetic shape memory effect, knowledge about the interaction between martensitic and magnetic domain structure is essential. In the case of Ni-Mn-Ga bulk material and foils, a staircase-like magnetic domain structure with 90°- and 180°-domain walls is known for modulated martensite. In the present paper we show that the magnetic domain pattern of thin epitaxial films is fundamentally different. Here we analyze epitaxial Ni-Mn-Ga films by atomic and magnetic force microscopy to investigate the correlation between the twinned martensitic variants and the magnetic stripe domains. The observed band-like domains with partially perpendicular outof-plane magnetization run perpendicular to the microstructure domains defined by twinning variants. These features can be explained by the finite film thickness, resulting in an equilibrium twinning period much smaller than the domain period. This does not allow the formation of a staircase domain patter. Instead the energies of the magnetic and martensitic microstructures are minimized independently by aligning both patterns perpendicularly to each other. By analyzing a thickness series we can show that the observed magnetic domain pattern can be quantitatively described by an adapted band domain model of Kittel.
△ Less
Submitted 17 March, 2012;
originally announced March 2012.
-
Failure of the Maxwell relation for the quantification of caloric effects in ferroic materials
Authors:
Robert Niemann,
Oleg Heczko,
Ludwig Schultz,
Sebastian Fähler
Abstract:
Giant caloric effects were reported in elasto-, electro- and magnetocaloric materials near phase transformations. Commonly, their entropy change is indirectly evaluated by a Maxwell relation. We report the fundamental failure of this approach. We analyze exemplarily the Ni-Mn-Ga magnetic shape memory alloy. An applied field results in magnetically induced reorientation of martensitic variants, whi…
▽ More
Giant caloric effects were reported in elasto-, electro- and magnetocaloric materials near phase transformations. Commonly, their entropy change is indirectly evaluated by a Maxwell relation. We report the fundamental failure of this approach. We analyze exemplarily the Ni-Mn-Ga magnetic shape memory alloy. An applied field results in magnetically induced reorientation of martensitic variants, which form during the phase transformation. This results in a spurious magnetocaloric effect, which only disappears when repeating the measurement a second time. This failure is universal as the vector character of the applied field is not considered in the common scalar evaluation of a Maxwell relation.
△ Less
Submitted 17 October, 2011;
originally announced October 2011.
-
Magnetic nanostructures by adaptive twinning in strained epitaxial films
Authors:
Sandra Kauffmann-Weiss,
Markus E. Gruner,
Anja Backen,
Ludwig Schultz,
Peter Entel,
Sebastian Fähler
Abstract:
We exploit the intrinsic structural instability of the Fe70Pd30 magnetic shape memory alloy to obtain functional epitaxial films exhibiting a self-organized nanostructure. We demonstrate that coherent epitaxial straining by 54% is possible. The combination of thin film experiments and large-scale first-principles calculations enables us to establish a lattice relaxation mechanism, which is not exp…
▽ More
We exploit the intrinsic structural instability of the Fe70Pd30 magnetic shape memory alloy to obtain functional epitaxial films exhibiting a self-organized nanostructure. We demonstrate that coherent epitaxial straining by 54% is possible. The combination of thin film experiments and large-scale first-principles calculations enables us to establish a lattice relaxation mechanism, which is not expected for stable materials. We identify a low twin boundary energy compared to a high elastic energy as key prerequisite for the adaptive nanotwinning. Our approach is versatile as it allows to control both, nanostructure and intrinsic properties for ferromagnetic, ferroelastic and ferroelectric materials.
△ Less
Submitted 24 November, 2011; v1 submitted 19 July, 2011;
originally announced July 2011.
-
Modulated Martensite: Why it forms and why it deforms easily
Authors:
Stefan Kaufmann,
Robert Niemann,
Thomas Thersleff,
Ulrich K. Rößler,
Oleg Heczko,
Jörg Buschbeck,
Bernhard Holzapfel,
Ludwig Schultz,
Sebastian Fähler
Abstract:
Diffusionless phase transitions are at the core of the multifunctionality of (magnetic) shape memory alloys, ferroelectrics and multiferroics. Giant strain effects under external fields are obtained in low symmetric modulated martensitic phases. We outline the origin of modulated phases, their connection with tetragonal martensite and consequences for their functional properties by analysing the m…
▽ More
Diffusionless phase transitions are at the core of the multifunctionality of (magnetic) shape memory alloys, ferroelectrics and multiferroics. Giant strain effects under external fields are obtained in low symmetric modulated martensitic phases. We outline the origin of modulated phases, their connection with tetragonal martensite and consequences for their functional properties by analysing the martensitic microstructure of epitaxial Ni-Mn-Ga films from the atomic to macroscale. Geometrical constraints at an austenite-martensite phase boundary act down to the atomic scale. Hence a martensitic microstructure of nanotwinned tetragonal martensite can form. Coarsening of twin variants can reduce twin boundary energy, a process we could follow from the atomic to the millimetre scale. Coarsening is a fractal process, proceeding in discrete steps by doubling twin periodicity. The collective defect energy results in a substantial hysteresis, which allows retaining modulated martensite as a metastable phase at room temperature. In this metastable state elastic energy is released by the formation of a 'twins within twins' microstructure which can be observed from the nanometre to millimetre scale. This hierarchical twinning results in mesoscopic twin boundaries which are diffuse, in contrast to the common atomically sharp twin boundaries of tetragonal martensite. We suggest that observed extraordinarily high mobility of such mesoscopic twin boundaries originates from their diffuse nature which renders pinning by atomistic point defects ineffective.
△ Less
Submitted 19 April, 2011; v1 submitted 17 December, 2010;
originally announced December 2010.
-
Tuning of crystal structure and magnetic properties by exceptionally large epitaxial strains
Authors:
J. Buschbeck,
I. Opahle,
M. Richter,
U. K. Rossler,
P. Klaer,
M. Kallmayer,
H. J. Elmers,
G. Jakob,
L. Schultz,
S. Fahler
Abstract:
Huge deformations of the crystal lattice can be achieved in materials with inherent structural instability by epitaxial straining. By coherent growth on seven different substrates the in-plane lattice constants of 50 nm thick Fe70Pd30 films are continuously varied. The maximum epitaxial strain reaches 8,3 % relative to the fcc lattice. The in-plane lattice strain results in a remarkable tetragon…
▽ More
Huge deformations of the crystal lattice can be achieved in materials with inherent structural instability by epitaxial straining. By coherent growth on seven different substrates the in-plane lattice constants of 50 nm thick Fe70Pd30 films are continuously varied. The maximum epitaxial strain reaches 8,3 % relative to the fcc lattice. The in-plane lattice strain results in a remarkable tetragonal distortion ranging from c/abct = 1.09 to 1.39, covering most of the Bain transformation path from fcc to bcc crystal structure. This has dramatic consequences for the magnetic key properties. Magnetometry and X-ray circular dichroism (XMCD) measurements show that Curie temperature, orbital magnetic moment, and magnetocrystalline anisotropy are tuned over broad ranges.
△ Less
Submitted 21 November, 2009; v1 submitted 9 September, 2009;
originally announced September 2009.
-
Adaptive modulations of martensites
Authors:
S. Kaufmann,
U. K. Roessler,
O. Heczko,
M. Wuttig,
J. Buschbeck,
L. Schultz,
S. Fahler
Abstract:
Modulated phases occur in numerous functional materials like giant ferroelectrics and magnetic shape memory alloys. To understand the origin of these phases, we review and generalize the concept of adaptive martensite. As a starting point, we investigate the coexistence of austenite, adaptive 14M phase and tetragonal martensite in Ni-Mn-Ga magnetic shape memory alloy epitaxial films. The modulat…
▽ More
Modulated phases occur in numerous functional materials like giant ferroelectrics and magnetic shape memory alloys. To understand the origin of these phases, we review and generalize the concept of adaptive martensite. As a starting point, we investigate the coexistence of austenite, adaptive 14M phase and tetragonal martensite in Ni-Mn-Ga magnetic shape memory alloy epitaxial films. The modulated martensite can be constructed from nanotwinned variants of a tetragonal martensite phase. By combining the concept of adaptive martensite with branching of twin variants, we can explain key features of modulated phases from a microscopic view. This includes phase stability, the sequence of 6M-10M-NM intermartensitic transitions, and magnetocrystalline anisotropy.
△ Less
Submitted 29 June, 2009;
originally announced June 2009.
