-
$\mathcal{PT}$-Symmetry induced Bi-Stability in Non-Hermitian Cavity Magnomechanics
Authors:
Chaoyi Lai,
Shah Fahad,
Kashif Ammar Yasir
Abstract:
We study the steady-state non-Hermitian magnomechanical system driven by a transverse magnetic field directly interacting with YIG sphere and excites cavity magnons and photons. To make the system non-Hermitian, we use a traveling field directly interacting with magnons generating gain to the system. We start by illustrating PT-configuration of the system, which contains two PT broken region aroun…
▽ More
We study the steady-state non-Hermitian magnomechanical system driven by a transverse magnetic field directly interacting with YIG sphere and excites cavity magnons and photons. To make the system non-Hermitian, we use a traveling field directly interacting with magnons generating gain to the system. We start by illustrating PT-configuration of the system, which contains two PT broken region around exceptional point and PT protected region along the axis of exceptional point. Late, we discover that the numbers of cavity photons and magnons show bistable behavior depending upon the PT configuration, which becomes more significant as the values of the magnon-photon coupling and traveling field strength increases. We illustrate that steady-state photon only shows bistable behavior when the system in in lossy PT broken configuration, means strength of traveling field is less than the magnon-photon coupling. Otherwise, it will just contain a single stable state because of bistability suppression with gain in the system, which is unlike with any other investigation in this direction. Further, a larger magnon-photon coupling increases photon intensity and decreases magnon intensity, because of photon and magnon energy exchange, leading to enhanced photon bistablity and decreased magnon bistability. However, in case of increasing strength of traveling field, both photon as well as magnon bistability is appeared to be decreasing. We also study the steady-state effective potential of the system and illustrate the occurrence of bistability with nonlinear interactions between contour trajectories, which similarly depends on the PT broken configuration of the system.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
λ-Scaled-Attention: A Novel Fast Attention Mechanism for Efficient Modeling of Protein Sequences
Authors:
Ashish Ranjan,
Md Shah Fahad,
Akshay Deepak
Abstract:
Attention-based deep networks have been successfully applied on textual data in the field of NLP. However, their application on protein sequences poses additional challenges due to the weak semantics of the protein words, unlike the plain text words. These unexplored challenges faced by the standard attention technique include (i) vanishing attention score problem and (ii) high variations in the a…
▽ More
Attention-based deep networks have been successfully applied on textual data in the field of NLP. However, their application on protein sequences poses additional challenges due to the weak semantics of the protein words, unlike the plain text words. These unexplored challenges faced by the standard attention technique include (i) vanishing attention score problem and (ii) high variations in the attention distribution. In this regard, we introduce a novel λ-scaled attention technique for fast and efficient modeling of the protein sequences that addresses both the above problems. This is used to develop the λ-scaled attention network and is evaluated for the task of protein function prediction implemented at the protein sub-sequence level. Experiments on the datasets for biological process (BP) and molecular function (MF) showed significant improvements in the F1 score values for the proposed λ-scaled attention technique over its counterpart approach based on the standard attention technique (+2.01% for BP and +4.67% for MF) and state-of-the-art ProtVecGen-Plus approach (+2.61% for BP and +4.20% for MF). Further, fast convergence (converging in half the number of epochs) and efficient learning (in terms of very low difference between the training and validation losses) were also observed during the training process.
△ Less
Submitted 8 January, 2022;
originally announced January 2022.
-
An Advanced Two-Stage Grid Connected PV System: A Fractional-Order Controller
Authors:
Shah Fahad,
Nasim Ullah,
Ali Jafer Mahdi,
Asier Ibeas,
Arman Goudarzi
Abstract:
A fractional-order (FO) based controller for a grid-connected PV system is presented in this paper. A single phase two-stage grid-connected photovoltaic generator (PVG) is used to test the performance of the FO controller. The main objectives of the proposed controller are: (1) To regulate the output voltage of PVG at a point where the maximum power is drawn. (2) Constant DC-link voltage control.…
▽ More
A fractional-order (FO) based controller for a grid-connected PV system is presented in this paper. A single phase two-stage grid-connected photovoltaic generator (PVG) is used to test the performance of the FO controller. The main objectives of the proposed controller are: (1) To regulate the output voltage of PVG at a point where the maximum power is drawn. (2) Constant DC-link voltage control. (3) Power factor control (PFC) at the inverter output with low total harmonic distortion (THD). To solve the first problem, a non-linear control method known as fractional-order back-step** control (FOBSC) is used to regulate the output voltage of PVG. A maximum power point tracking (MPPT) technique known as perturb and observe (P & O) is used to generate a reference voltage which is suitable for tracking the maximum power generation of PVG. The generated reference is used to regulate the output voltage of PVG using FOBSC. The DC-link voltage fluctuation issue is tackled using FO based PI controller. The last objective is achieved using FOBSC to obtain maximum power factor of the grid. Lyapunov candidate function is used to verify the stability of the system. To test the performance of the proposed controller, it is compared to conventionally known Integer-order (IO) controller. Results have shown a significant improvement in THD and efficiency of the system. The proposed controller offers 0.94%, 1.43% and 1.86% lower THD in comparison with IO controller at 100%, 80% and 70% of the power generation capacity of PVG, respectively. The overall efficiency of the system for 100%, 80%, and 70% of the dynamic powers of the system is noticed to be better in case of FO controller.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Pitch-Synchronous Single Frequency Filtering Spectrogram for Speech Emotion Recognition
Authors:
Shruti Gupta,
Md. Shah Fahad,
Akshay Deepak
Abstract:
Convolutional neural networks (CNN) are widely used for speech emotion recognition (SER). In such cases, the short time fourier transform (STFT) spectrogram is the most popular choice for representing speech, which is fed as input to the CNN. However, the uncertainty principles of the short-time Fourier transform prevent it from capturing time and frequency resolutions simultaneously. On the other…
▽ More
Convolutional neural networks (CNN) are widely used for speech emotion recognition (SER). In such cases, the short time fourier transform (STFT) spectrogram is the most popular choice for representing speech, which is fed as input to the CNN. However, the uncertainty principles of the short-time Fourier transform prevent it from capturing time and frequency resolutions simultaneously. On the other hand, the recently proposed single frequency filtering (SFF) spectrogram promises to be a better alternative because it captures both time and frequency resolutions simultaneously. In this work, we explore the SFF spectrogram as an alternative representation of speech for SER. We have modified the SFF spectrogram by taking the average of the amplitudes of all the samples between two successive glottal closure instants (GCI) locations. The duration between two successive GCI locations gives the pitch, motivating us to name the modified SFF spectrogram as pitch-synchronous SFF spectrogram. The GCI locations were detected using zero frequency filtering approach. The proposed pitch-synchronous SFF spectrogram produced accuracy values of 63.95% (unweighted) and 70.4% (weighted) on the IEMOCAP dataset. These correspond to an improvement of +7.35% (unweighted) and +4.3% (weighted) over state-of-the-art result on the STFT sepctrogram using CNN. Specially, the proposed method recognized 22.7% of the happy emotion samples correctly, whereas this number was 0% for state-of-the-art results. These results also promise a much wider use of the proposed pitch-synchronous SFF spectrogram for other speech-based applications.
△ Less
Submitted 7 August, 2019;
originally announced August 2019.
-
XDoser, A Benchmarking Tool for System Load Measurement Using Denial of Service Features
Authors:
AKM Bahalul Haque,
Rabeya Sultana,
Mohammad Sajid Fahad,
MD Nasif Latif,
Md. Amdadul Bari
Abstract:
Technology has developed so fast that we feel both safe as well as unsafe in both ways. Systems used today are always prone to attack by malicious users. In most cases, services are hindered because these systems cannot handle the amount of over loads the attacker provides. So, proper service load measurement is necessary. The tool that is being described in this paper for developments is based on…
▽ More
Technology has developed so fast that we feel both safe as well as unsafe in both ways. Systems used today are always prone to attack by malicious users. In most cases, services are hindered because these systems cannot handle the amount of over loads the attacker provides. So, proper service load measurement is necessary. The tool that is being described in this paper for developments is based on the Denial of Service methodologies. This tool, XDoser will put a synthetic load on the servers for testing purpose. The HTTP Flood method is used which includes an HTTP POST method as it forces the website to gather the maximum resources possible in response to every single request. The tool developed in this paper will focus on overloading the backend with multiple requests. So, the tool can be implemented for servers new or old for synthetic test endurance testing.
△ Less
Submitted 30 May, 2019;
originally announced May 2019.
-
Deep Robust Framework for Protein Function Prediction using Variable-Length Protein Sequences
Authors:
Ashish Ranjan,
Md Shah Fahad,
David Fernandez-Baca,
Akshay Deepak,
Sudhakar Tripathi
Abstract:
Amino acid sequence portrays most intrinsic form of a protein and expresses primary structure of protein. The order of amino acids in a sequence enables a protein to acquire a particular stable conformation that is responsible for the functions of the protein. This relationship between a sequence and its function motivates the need to analyse the sequences for predicting protein functions. Early g…
▽ More
Amino acid sequence portrays most intrinsic form of a protein and expresses primary structure of protein. The order of amino acids in a sequence enables a protein to acquire a particular stable conformation that is responsible for the functions of the protein. This relationship between a sequence and its function motivates the need to analyse the sequences for predicting protein functions. Early generation computational methods using BLAST, FASTA, etc. perform function transfer based on sequence similarity with existing databases and are computationally slow. Although machine learning based approaches are fast, they fail to perform well for long protein sequences (i.e., protein sequences with more than 300 amino acid residues). In this paper, we introduce a novel method for construction of two separate feature sets for protein sequences based on analysis of 1) single fixed-sized segments and 2) multi-sized segments, using bi-directional long short-term memory network. Further, model based on proposed feature set is combined with the state of the art Multi-lable Linear Discriminant Analysis (MLDA) features based model to improve the accuracy. Extensive evaluations using separate datasets for biological processes and molecular functions demonstrate promising results for both single-sized and multi-sized segments based feature sets. While former showed an improvement of +3.37% and +5.48%, the latter produces an improvement of +5.38% and +8.00% respectively for two datasets over the state of the art MLDA based classifier. After combining two models, there is a significant improvement of +7.41% and +9.21% respectively for two datasets compared to MLDA based classifier. Specifically, the proposed approach performed well for the long protein sequences and superior overall performance.
△ Less
Submitted 19 June, 2019; v1 submitted 4 November, 2018;
originally announced November 2018.
-
DNN-HMM based Speaker Adaptive Emotion Recognition using Proposed Epoch and MFCC Features
Authors:
Md. Shah Fahad,
Jainath Yadav,
Gyadhar Pradhan,
Akshay Deepak
Abstract:
Speech is produced when time varying vocal tract system is excited with time varying excitation source. Therefore, the information present in a speech such as message, emotion, language, speaker is due to the combined effect of both excitation source and vocal tract system. However, there is very less utilization of excitation source features to recognize emotion. In our earlier work, we have prop…
▽ More
Speech is produced when time varying vocal tract system is excited with time varying excitation source. Therefore, the information present in a speech such as message, emotion, language, speaker is due to the combined effect of both excitation source and vocal tract system. However, there is very less utilization of excitation source features to recognize emotion. In our earlier work, we have proposed a novel method to extract glottal closure instants (GCIs) known as epochs. In this paper, we have explored epoch features namely instantaneous pitch, phase and strength of epochs for discriminating emotions. We have combined the excitation source features and the well known Male-frequency cepstral coefficient (MFCC) features to develop an emotion recognition system with improved performance. DNN-HMM speaker adaptive models have been developed using MFCC, epoch and combined features. IEMOCAP emotional database has been used to evaluate the models. The average accuracy for emotion recognition system when using MFCC and epoch features separately is 59.25% and 54.52% respectively. The recognition performance improves to 64.2% when MFCC and epoch features are combined.
△ Less
Submitted 4 June, 2018;
originally announced June 2018.
