-
Mineral Detection of Neutrinos and Dark Matter. A Whitepaper
Authors:
Sebastian Baum,
Patrick Stengel,
Natsue Abe,
Javier F. Acevedo,
Gabriela R. Araujo,
Yoshihiro Asahara,
Frank Avignone,
Levente Balogh,
Laura Baudis,
Yilda Boukhtouchen,
Joseph Bramante,
Pieter Alexander Breur,
Lorenzo Caccianiga,
Francesco Capozzi,
Juan I. Collar,
Reza Ebadi,
Thomas Edwards,
Klaus Eitel,
Alexey Elykov,
Rodney C. Ewing,
Katherine Freese,
Audrey Fung,
Claudio Galelli,
Ulrich A. Glasmacher,
Arianna Gleason
, et al. (44 additional authors not shown)
Abstract:
Minerals are solid state nuclear track detectors - nuclear recoils in a mineral leave latent damage to the crystal structure. Depending on the mineral and its temperature, the damage features are retained in the material from minutes (in low-melting point materials such as salts at a few hundred degrees C) to timescales much larger than the 4.5 Gyr-age of the Solar System (in refractory materials…
▽ More
Minerals are solid state nuclear track detectors - nuclear recoils in a mineral leave latent damage to the crystal structure. Depending on the mineral and its temperature, the damage features are retained in the material from minutes (in low-melting point materials such as salts at a few hundred degrees C) to timescales much larger than the 4.5 Gyr-age of the Solar System (in refractory materials at room temperature). The damage features from the $O(50)$ MeV fission fragments left by spontaneous fission of $^{238}$U and other heavy unstable isotopes have long been used for fission track dating of geological samples. Laboratory studies have demonstrated the readout of defects caused by nuclear recoils with energies as small as $O(1)$ keV. This whitepaper discusses a wide range of possible applications of minerals as detectors for $E_R \gtrsim O(1)$ keV nuclear recoils: Using natural minerals, one could use the damage features accumulated over $O(10)$ Myr$-O(1)$ Gyr to measure astrophysical neutrino fluxes (from the Sun, supernovae, or cosmic rays interacting with the atmosphere) as well as search for Dark Matter. Using signals accumulated over months to few-years timescales in laboratory-manufactured minerals, one could measure reactor neutrinos or use them as Dark Matter detectors, potentially with directional sensitivity. Research groups in Europe, Asia, and America have started develo** microscopy techniques to read out the $O(1) - O(100)$ nm damage features in crystals left by $O(0.1) - O(100)$ keV nuclear recoils. We report on the status and plans of these programs. The research program towards the realization of such detectors is highly interdisciplinary, combining geoscience, material science, applied and fundamental physics with techniques from quantum information and Artificial Intelligence.
△ Less
Submitted 16 May, 2023; v1 submitted 17 January, 2023;
originally announced January 2023.
-
Aeolian sediment transport on Io from lava-frost interactions
Authors:
George D. McDonald,
Joshua Méndez Harper,
Lujendra Ojha,
Paul Corlies,
Josef Dufek,
Ryan C. Ewing,
Laura Kerber
Abstract:
Surface modification on Jupiter's volcanically active moon, Io, has to date been attributed almost exclusively to lava emplacement and volcanic plume deposits. Here we demonstrate that wind-blown transport of sediment may also be altering the Ionian surface. Specifically, shallow subsurface interactions between lava and Io's widespread sulfur dioxide (SO$_2$) frost can produce localized sublimatio…
▽ More
Surface modification on Jupiter's volcanically active moon, Io, has to date been attributed almost exclusively to lava emplacement and volcanic plume deposits. Here we demonstrate that wind-blown transport of sediment may also be altering the Ionian surface. Specifically, shallow subsurface interactions between lava and Io's widespread sulfur dioxide (SO$_2$) frost can produce localized sublimation vapor flows with sufficient gas densities to enable particle saltation. We calculate anticipated outgassing velocities from lava-SO$_2$ frost interactions, and compare these to the saltation thresholds predicted when accounting for the tenuous nature of the sublimated vapor. We find that saltation may occur if frost temperatures surpass 155 K. Finally we make the first measurements of the dimensions of linear features in images from the Galileo probe, previously termed "ridges", which demonstrate certain similarities to dunes on other planetary bodies. Io joins a growing list of bodies with tenuous and transient atmospheres where aeolian sediment transport may be an important control on the landscape.
△ Less
Submitted 18 April, 2022;
originally announced April 2022.
-
Spatial and temporal development of incipient dunes
Authors:
Cyril Gadal,
Clément Narteau,
Ryan C. Ewing,
Andrew Gunn,
Douglas Jerolmack,
Bruno Andreotti,
Philippe Claudin
Abstract:
In zones of loose sand, wind-blown sand dunes emerge due the linear instability of a flat sedimentary bed. This instability has been studied in experiments and numerical models but rarely in the field, due to the large time and length scales involved. We examine dune formation at the upwind margin of the White Sands Dune Field in New Mexico (USA), using 4 years of lidar topographic data to follow…
▽ More
In zones of loose sand, wind-blown sand dunes emerge due the linear instability of a flat sedimentary bed. This instability has been studied in experiments and numerical models but rarely in the field, due to the large time and length scales involved. We examine dune formation at the upwind margin of the White Sands Dune Field in New Mexico (USA), using 4 years of lidar topographic data to follow the spatial and temporal development of incipient dunes. Data quantify dune wavelength, growth rate, and propagation velocity and also the characteristic length scale associated with the growth process. We show that all these measurements are in quantitative agreement with predictions from linear stability analysis. This validation makes it possible to use the theory to reliably interpret dune-pattern characteristics and provide quantitative constraints on associated wind regimes and sediment properties, where direct local measurements are not available or feasible.
△ Less
Submitted 2 October, 2020; v1 submitted 27 August, 2020;
originally announced August 2020.
-
Caesium fallout in Tokyo on 15th March, 2011 is dominated by highly radioactive, caesium-rich microparticles
Authors:
Satoshi Utsunomiya,
Genki Furuki,
Asumi Ochiai,
Shinya Yamasaki,
Kenji Nanba,
Bernd Grambow,
Rodney C. Ewing
Abstract:
In order to understand the chemical properties and environmental impacts of low-solubility Cs-rich microparticles (CsMPs) derived from the FDNPP, the CsMPs collected from Tokyo were investigated at the atomic scale using high-resolution transmission electron microscopy (HRTEM) and dissolution experiments were performed on the air filters. Remarkably, CsMPs 0.58-2.0 micrometer in size constituted 8…
▽ More
In order to understand the chemical properties and environmental impacts of low-solubility Cs-rich microparticles (CsMPs) derived from the FDNPP, the CsMPs collected from Tokyo were investigated at the atomic scale using high-resolution transmission electron microscopy (HRTEM) and dissolution experiments were performed on the air filters. Remarkably, CsMPs 0.58-2.0 micrometer in size constituted 80%-89% of the total Cs radioactivity during the initial fallout events on 15th March, 2011. The CsMPs from Tokyo and Fukushima exhibit the same texture at the nanoscale: aggregates of Zn-Fe-oxide nanoparticles embedded in amorphous SiO2 glass. The Cs is associated with Zn-Fe-oxide nanoparticles or in the form of nanoscale inclusions of intrinsic Cs species,rather than dissolved in the SiO2 matrix. The Cs concentration in CsMPs from Tokyo (0.55-10.9 wt%) is generally less than that in particles from Fukushima (8.5-12.9 wt%).The radioactivity per unit mass of CsMPs from Tokyo is still as high as 1E11 Bq/g, which is extremely high for particles originating from nuclear accidents. Thus, inhalation of the low-solubility CsMPs would result in a high localized energy deposition by beta (0.51-12)*1E-3 Gy/h within the 100-micrometer-thick water layer on the CsMP surface) and may have longer-term effects compared with those predicted for soluble Cs-species.
△ Less
Submitted 26 July, 2019; v1 submitted 1 June, 2019;
originally announced June 2019.
-
Synthesis and electronic structure characterization of diamane
Authors:
Feng Ke,
Lingkong Zhang,
Yabin Chen,
Ketao Yin,
Chenxu Wang,
Wanquan Zhu,
Hailun Wang,
Yu Lin,
Zhenxian Liu,
John S. Tse,
Guilin Wu,
Rodney C. Ewing,
Wendy L. Mao,
Junqiao Wu,
Ho-Kwang Mao,
Bin Chen
Abstract:
Atomically thin graphite, known as graphene, has been a marvel in material science because of its exceptional properties, novel physics and promising applications. Atomically thin diamond, called diamane, has also attracted considerable scientific interest due to its potential physical and mechanical properties. However, until now there has been no reports of successful synthesis of a free-standin…
▽ More
Atomically thin graphite, known as graphene, has been a marvel in material science because of its exceptional properties, novel physics and promising applications. Atomically thin diamond, called diamane, has also attracted considerable scientific interest due to its potential physical and mechanical properties. However, until now there has been no reports of successful synthesis of a free-standing pristine diamane film. Here, we report the synthesis and electronic structure characterization of diamane. Electrical measurements, x-ray diffraction and theoretical simulations reveal that trilayer and thicker graphene transform to hexagonal diamane (h-diamane) when compressed to above 20 GPa, which can be preserved down to few GPa. Raman studies indicate that the sample quenched from high pressure and high temperature also has a h-diamane structure, i.e., h-diamane is recovered back to ambient conditions. Optical absorption and band structure calculations reveal an indirect energy gap of 2.8 eV in the diamane film. Compared to gapless graphene, diamane with sizable bandgap may open up new applications of carbon semiconductors.
△ Less
Submitted 5 February, 2019;
originally announced February 2019.
-
Circadian rhythm of dune-field activity
Authors:
Andrew Gunn,
Matt Wanker,
Nicholas Lancaster,
Douglas A. Edmonds,
Ryan C. Ewing,
Douglas J. Jerolmack
Abstract:
Wind-blown sand dunes are both a consequence and a driver of climate dynamics; they arise under persistently dry and windy conditions, and are sometimes a source for airborne dust. Dune fields experience extreme daily changes in temperature, yet the role of atmospheric stability in driving sand transport and dust emission has not been established. Here we report on an unprecedented multi-scale fie…
▽ More
Wind-blown sand dunes are both a consequence and a driver of climate dynamics; they arise under persistently dry and windy conditions, and are sometimes a source for airborne dust. Dune fields experience extreme daily changes in temperature, yet the role of atmospheric stability in driving sand transport and dust emission has not been established. Here we report on an unprecedented multi-scale field experiment at the White Sands Dune Field (New Mexico, USA), where we demonstrate that a daily rhythm of sand and dust transport arises from non-equilibrium atmospheric boundary layer convection. A global analysis of 45 dune fields confirms the connection between surface wind speed and diurnal temperature cycles, revealing an unrecognized climate feedback that may contribute to the growth of deserts on Earth and dune activity on Mars.
△ Less
Submitted 6 May, 2020; v1 submitted 9 December, 2018;
originally announced December 2018.
-
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
Authors:
Cameron L. Tracy,
Sulgiye Park,
Dylan R. Rittman,
Steven J. Zinkle,
Hongbin Bei,
Maik Lang,
Rodney C. Ewing,
Wendy L. Mao
Abstract:
High-entropy alloys, near-equiatomic solid solutions of five or more elements, represent a new strategy for the design of materials with properties superior to those of conventional alloys. However, their phase space remains constrained, with transition metal high-entropy alloys exhibiting only face- or body-centered cubic structures. Here, we report the high-pressure synthesis of a hexagonal clos…
▽ More
High-entropy alloys, near-equiatomic solid solutions of five or more elements, represent a new strategy for the design of materials with properties superior to those of conventional alloys. However, their phase space remains constrained, with transition metal high-entropy alloys exhibiting only face- or body-centered cubic structures. Here, we report the high-pressure synthesis of a hexagonal close-packed phase of the prototypical high-entropy alloy CrMnFeCoNi. This martensitic transformation begins at 14 GPa and is attributed to suppression of the local magnetic moments, destabilizing the initial fcc structure. Similar to fcc-to-hcp transformations in Al and the noble gases, the transformation is sluggish, occurring over a range of >40 GPa. However, the behaviour of CrMnFeCoNi is unique in that the hcp phase is retained following decompression to ambient pressure, yielding metastable fcc-hcp mixtures. This demonstrates a means of tuning the structures and properties of high-entropy alloys in a manner not achievable by conventional processing techniques.
△ Less
Submitted 25 May, 2017; v1 submitted 2 November, 2016;
originally announced November 2016.