-
Spin communication over 30 $μ$m long channels of chemical vapor deposited graphene on SiO$_2$
Authors:
Z. M. Gebeyehu,
S. Parui,
J. F. Sierra,
M. Timmermans,
M. J. Esplandiu,
S. Brems,
C. Huyghebaert,
K. Garello,
M. V. Costache,
S. O. Valenzuela
Abstract:
We demonstrate a high-yield fabrication of non-local spin valve devices with room-temperature spin lifetimes of up to 3 ns and spin relaxation lengths as long as 9 $μ$m in platinum-based chemical vapor deposition (Pt-CVD) synthesized single-layer graphene on SiO$_2$/Si substrates. The spin-lifetime systematically presents a marked minimum at the charge neutrality point, as typically observed in pr…
▽ More
We demonstrate a high-yield fabrication of non-local spin valve devices with room-temperature spin lifetimes of up to 3 ns and spin relaxation lengths as long as 9 $μ$m in platinum-based chemical vapor deposition (Pt-CVD) synthesized single-layer graphene on SiO$_2$/Si substrates. The spin-lifetime systematically presents a marked minimum at the charge neutrality point, as typically observed in pristine exfoliated graphene. However, by studying the carrier density dependence beyond n ~ 5 x 10$^{12}$ cm$^{-2}$, via electrostatic gating, it is found that the spin lifetime reaches a maximum and then starts decreasing, a behavior that is reminiscent of that predicted when the spin-relaxation is driven by spin-orbit interaction. The spin lifetimes and relaxation lengths compare well with state-of-the-art results using exfoliated graphene on SiO$_2$/Si, being a factor two-to-three larger than the best values reported at room temperature using the same substrate. As a result, the spin signal can be readily measured across 30 $μ$m long graphene channels. These observations indicate that Pt-CVD graphene is a promising material for large-scale spin-based logic-in-memory applications.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Cooling and Self-Oscillation in a Nanotube Electro-Mechanical Resonator
Authors:
C. Urgell,
W. Yang,
S. L. de Bonis,
C. Samanta,
M. J. Esplandiu,
Q. Dong,
Y. **,
A. Bachtold
Abstract:
Nanomechanical resonators are used with great success to couple mechanical motion to other degrees of freedom, such as photons, spins, and electrons. Mechanical vibrations can be efficiently cooled and amplified using photons, but not with other degrees of freedom. Here, we demonstrate a simple yet powerful method for cooling, amplification, and self-oscillation using electrons. This is achieved b…
▽ More
Nanomechanical resonators are used with great success to couple mechanical motion to other degrees of freedom, such as photons, spins, and electrons. Mechanical vibrations can be efficiently cooled and amplified using photons, but not with other degrees of freedom. Here, we demonstrate a simple yet powerful method for cooling, amplification, and self-oscillation using electrons. This is achieved by applying a constant (DC) current of electrons through a suspended nanotube in a dilution fridge. We demonstrate cooling down to $4.6\pm 2.0$ quanta of vibrations. We also observe self-oscillation, which can lead to prominent instabilities in the electron transport through the nanotube. We attribute the origin of the observed cooling and self-oscillation to an electrothermal effect. This work shows that electrons may become a useful resource for quantum manipulation of mechanical resonators.
△ Less
Submitted 12 March, 2019;
originally announced March 2019.
-
Sequential tasks performed by catalytic pumps for colloidal crystallization
Authors:
Ali Afshar Farniya,
Maria J. Esplandiu,
Adrian Bachtold
Abstract:
Gold-platinum catalytic pumps immersed in a chemical fuel are used to manipulate silica colloids. The manipulation relies on the electric field and the fluid flow generated by the pump. Catalytic pumps perform various tasks, such as the repulsion of colloids, the attraction of colloids, and the guided crystallization of colloids. We demonstrate that catalytic pumps can execute these tasks sequenti…
▽ More
Gold-platinum catalytic pumps immersed in a chemical fuel are used to manipulate silica colloids. The manipulation relies on the electric field and the fluid flow generated by the pump. Catalytic pumps perform various tasks, such as the repulsion of colloids, the attraction of colloids, and the guided crystallization of colloids. We demonstrate that catalytic pumps can execute these tasks sequentially over time. Switching from one task to the next is related to the local change of the proton concentration, which modifies the colloid zeta potential and consequently the electric force acting on the colloids.
△ Less
Submitted 20 October, 2014;
originally announced October 2014.
-
Imaging the proton concentration and map** the spatial distribution of the electric field of catalytic micropumps
Authors:
A. Afshar Farniya,
M. J. Esplandiu,
D. Reguera,
A. Bachtold
Abstract:
Catalytic engines can use hydrogen peroxide as a chemical fuel in order to drive motion at the microscale. The chemo-mechanical actuation is a complex mechanism based on the interrelation between catalytic reactions and electro-hydrodynamics phenomena. We studied catalytic micropumps using fluorescence confocal microscopy to image the concentration of protons in the liquid. In addition, we measure…
▽ More
Catalytic engines can use hydrogen peroxide as a chemical fuel in order to drive motion at the microscale. The chemo-mechanical actuation is a complex mechanism based on the interrelation between catalytic reactions and electro-hydrodynamics phenomena. We studied catalytic micropumps using fluorescence confocal microscopy to image the concentration of protons in the liquid. In addition, we measured the motion of particles with different charges in order to map the spatial distributions of the electric field, the electrostatic potential and the fluid flow. The combination of these two techniques allows us to contrast the gradient of the concentration of protons against the spatial variation in the electric field. We present numerical simulations that reproduce the experimental results. Our work sheds light on the interrelation between the different processes at work in the chemo-mechanical actuation of catalytic pumps. Our experimental approach could be used to study other electrochemical systems with heterogeneous electrodes.
△ Less
Submitted 13 November, 2013;
originally announced November 2013.
-
Ultrasensitive force detection with a nanotube mechanical resonator
Authors:
J. Moser,
J. Guttinger,
A. Eichler,
M. J. Esplandiu,
D. E. Liu,
M. I. Dykman,
A. Bachtold
Abstract:
Since the advent of atomic force microscopy, mechanical resonators have been used to study a wide variety of phenomena, such as the dynamics of individual electron spins, persistent currents in normal metal rings, and the Casimir force. Key to these experiments is the ability to measure weak forces. Here, we report on force sensing experiments with a sensitivity of 12 zN Hz^(-1/2) at a temperature…
▽ More
Since the advent of atomic force microscopy, mechanical resonators have been used to study a wide variety of phenomena, such as the dynamics of individual electron spins, persistent currents in normal metal rings, and the Casimir force. Key to these experiments is the ability to measure weak forces. Here, we report on force sensing experiments with a sensitivity of 12 zN Hz^(-1/2) at a temperature of 1.2 K using a resonator made of a carbon nanotube. An ultra-sensitive method based on cross-correlated electrical noise measurements, in combination with parametric downconversion, is used to detect the low-amplitude vibrations of the nanotube induced by weak forces. The force sensitivity is quantified by applying a known capacitive force. This detection method also allows us to measure the Brownian vibrations of the nanotube down to cryogenic temperatures. Force sensing with nanotube resonators offers new opportunities for detecting and manipulating individual nuclear spins as well as for magnetometry measurements.
△ Less
Submitted 29 May, 2013;
originally announced May 2013.
-
Mechanical detection of carbon nanotube resonator vibrations
Authors:
D. Garcia-Sanchez,
A. San Paulo,
M. J. Esplandiu,
F. Perez-Murano,
L. Forro,
A. Aguasca,
A. Bachtold
Abstract:
Bending-mode vibrations of carbon nanotube resonator devices were mechanically detected in air at atmospheric pressure by means of a novel scanning force microscopy method. The fundamental and higher order bending eigenmodes were imaged at up to 3.1GHz with sub-nanometer resolution in vibration amplitude. The resonance frequency and the eigenmode shape of multi-wall nanotubes are consistent with…
▽ More
Bending-mode vibrations of carbon nanotube resonator devices were mechanically detected in air at atmospheric pressure by means of a novel scanning force microscopy method. The fundamental and higher order bending eigenmodes were imaged at up to 3.1GHz with sub-nanometer resolution in vibration amplitude. The resonance frequency and the eigenmode shape of multi-wall nanotubes are consistent with the elastic beam theory for a doubly clamped beam. For single-wall nanotubes, however, resonance frequencies are significantly shifted, which is attributed to fabrication generating, for example, slack. The effect of slack is studied by pulling down the tube with the tip, which drastically reduces the resonance frequency.
△ Less
Submitted 19 December, 2007;
originally announced December 2007.
-
Counting and manipulating single electrons using a carbon nanotube transistor
Authors:
An. Gruneis,
M. J. Esplandiu,
D. Garcia-Sanchez,
A. Bachtold
Abstract:
We report on the electric measurements of an individual Au nanoparticle with an ultra-high contact resistance of about $10^{19} Ω$. The high-impedance measurements have been carried out by counting the electrons that are transferred onto the particle. In order to do this, a carbon nanotube is used as the electrode for the supply of electrons but also as the detector of the charge transfer. Measu…
▽ More
We report on the electric measurements of an individual Au nanoparticle with an ultra-high contact resistance of about $10^{19} Ω$. The high-impedance measurements have been carried out by counting the electrons that are transferred onto the particle. In order to do this, a carbon nanotube is used as the electrode for the supply of electrons but also as the detector of the charge transfer. Measurements using single-electron detection allow us to determine the separation between the electron states in the Au nanoparticle, which is about 4 meV, consistent with the charging energy of the particle. Single-electron detection with nanotubes offers great promise for the study of electron transfer in highly resistive molecular systems.
△ Less
Submitted 13 April, 2007;
originally announced April 2007.