-
Compensation of Phase Noise in Massive-MIMO Uplink Communications Based on Expectation-Maximization Algorithm
Authors:
Alberto Tarable,
Francisco J. Escribano
Abstract:
Phase noise (PN) is a major disturbance in MIMO systems, where the contribution of different oscillators at the transmitter and the receiver side may degrade the overall performance and offset the gains offered by MIMO techniques. This is even more crucial in the case of massive MIMO, since the number of PN sources may increase considerably. In this work, we propose an iterative receiver based on…
▽ More
Phase noise (PN) is a major disturbance in MIMO systems, where the contribution of different oscillators at the transmitter and the receiver side may degrade the overall performance and offset the gains offered by MIMO techniques. This is even more crucial in the case of massive MIMO, since the number of PN sources may increase considerably. In this work, we propose an iterative receiver based on the application of the expectation-maximization algorithm. We consider a massive MIMO framework with a general association of oscillators to antennas, and include other channel disturbances like imperfect channel state information and Rician block fading. At each receiver iteration, given the information on the transmitted symbols, steepest descent is used to estimate the PN samples, with an optimized adaptive step size and a threshold-based stop** rule. The results obtained for several test cases show how the bit error rate and mean square error can benefit from the proposed phase-detection algorithm, even to the point of reaching the same performance as in the case where no PN is present, offering better results than a state-of-the-art alternative. Further analysis of the results allow to draw some useful trade-offs respecting final performance and consumption of resources.
△ Less
Submitted 12 May, 2024; v1 submitted 17 July, 2022;
originally announced July 2022.
-
Slotted Aloha with Capture for OWC-based IoT: Finite Block-Length Performance Analysis
Authors:
Tijana Devaja,
Milica Petkovic,
Francisco J. Escribano,
Cedomir Stefanovic,
Dejan Vukobratovic
Abstract:
In this paper, we propose a Slotted ALOHA (SA)-inspired solution for an indoor optical wireless communication (OWC)-based Internet of Things (IoT) system. Assuming that the OWC receiver exploits the capture effect, we are interested in the derivation of error probability of decoding a short-length data packet originating from a randomly selected OWC IoT transmitter. The presented OWC system analys…
▽ More
In this paper, we propose a Slotted ALOHA (SA)-inspired solution for an indoor optical wireless communication (OWC)-based Internet of Things (IoT) system. Assuming that the OWC receiver exploits the capture effect, we are interested in the derivation of error probability of decoding a short-length data packet originating from a randomly selected OWC IoT transmitter. The presented OWC system analysis rests on the derivation of the signal-to-noise-and-interference-ratio (SINR) statistics and usage of finite block-length (FBL) information theory, from which relevant error probability and throughput is derived. Using the derived expressions, we obtain numerical results which are further utilized to characterize the trade-offs between the system performance and the OWC system setup parameters. The indoor OWC-based system geometry plays an important role in the system performance, thus the presented results can be used as a guideline for the system design to optimize the performance of the SA-based random access protocol.
△ Less
Submitted 16 November, 2022; v1 submitted 5 May, 2022;
originally announced May 2022.
-
Reliability Analysis of Slotted Aloha with Capture for an OWC-based IoT system
Authors:
Milica Petkovic,
Tijana Devaja,
Dejan Vukobratovic,
Francisco J. Escribano,
Cedomir Stefanovic
Abstract:
In this article, we consider a random access scheme for an indoor Internet of Things (IoT) framework that uses optical wireless communication (OWC). We focus on a Slotted ALOHA (SA)-based solution where a number of OWC IoT users contend to send data to a central OWC receiver. In any given slot, and for a randomly selected active user, we consider the reliability of decoding the user's data packet…
▽ More
In this article, we consider a random access scheme for an indoor Internet of Things (IoT) framework that uses optical wireless communication (OWC). We focus on a Slotted ALOHA (SA)-based solution where a number of OWC IoT users contend to send data to a central OWC receiver. In any given slot, and for a randomly selected active user, we consider the reliability of decoding the user's data packet at the receiver. This is done by deriving the signal-to-noise-and-interference-ratio (SINR) statistics from a randomly chosen user and evaluating the probability that the user's SINR is below a given threshold. By placing our analysis in the context of an indoor OWC IoT uplink setup, and employing the standard OWC channel model, we investigate the trade-offs between the reliability and the OWC system parameters such as the cell area or the transmitter's semi-angle. We obtain valuable insights into the design of an SA-based random access solution for a typical indoor OWC cell.
△ Less
Submitted 15 July, 2021;
originally announced July 2021.
-
Denoising Atmospheric Temperature Measurements Taken by the Mars Science Laboratory on the Martian Surface
Authors:
S. Zurita-Zurita,
Francisco J. Escribano,
J. Sáez-Landete,
J. A. Rodríguez-Manfredi
Abstract:
In the present article we analyze data from two temperature sensors of the Mars Science Laboratory, which has been active in Mars since August 2012. Temperature measurements received from the rover are noisy and must be processed and validated before being delivered to the scientific community. Currently, a simple Moving Average (MA) filter is used to perform signal denoising. The application of t…
▽ More
In the present article we analyze data from two temperature sensors of the Mars Science Laboratory, which has been active in Mars since August 2012. Temperature measurements received from the rover are noisy and must be processed and validated before being delivered to the scientific community. Currently, a simple Moving Average (MA) filter is used to perform signal denoising. The application of this basic method relies on the assumption that the noise is stationary and statistically independent from the underlying structure of the signal, an arguable assumption in this kind of harsh environment. In this paper, we analyze the application of two alternative methods to process the temperature sensor measurements: the Discrete Wavelet Transform (DWT) and the Hilbert-Huang Transform (HHT). We consider two different datasets, one belonging to the current Martian measurement campaigns, and the other to the Thermal Vacuum Tests. The processing of these datasets allows to separate the random noise from the interference created by other systems. The experiments show that the MA filter may provide useful results under given circumstances. However, the proposed methods allow a better fitting for all the realistic scenarios, while providing the possibility to identify and analyze other interesting signal features and artifacts that could be later studied and classified. The large amount of data to be processed makes computational efficiency an important requirement in this mission. Considering the computational cost and the filtering performance, we propose the method based on DWT as more suitable for this application.
△ Less
Submitted 3 November, 2020; v1 submitted 22 October, 2020;
originally announced October 2020.
-
Optimization of Chaos-based Coded Modulations for Compensation of Amplifier Nonlinearities
Authors:
Francisco J. Escribano,
José Sáez-Landete,
Alexandre Wagemakers
Abstract:
In this work we expand the possibilities of a known class of chaos-based coded modulation (CCM) systems to address the problem of high-power amplifier (HPA) nonlinearity. The hypothesis is that the CCM nonlinear nature can be exploited to counteract its effects on the system performance, avoiding the need of a predistorter. We propose an optimization method for the design of the CCM to prove this…
▽ More
In this work we expand the possibilities of a known class of chaos-based coded modulation (CCM) systems to address the problem of high-power amplifier (HPA) nonlinearity. The hypothesis is that the CCM nonlinear nature can be exploited to counteract its effects on the system performance, avoiding the need of a predistorter. We propose an optimization method for the design of the CCM to prove this hypothesis. The results show that, for a given back-off level, a nonlinear map** function for the chaos-based encoder and decoder can be designed to compensate the HPA effect on the error rate.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
Chaos-Based Multicarrier VLC Modulator With Compensation of LED Nonlinearity
Authors:
Francisco J. Escribano,
José Sáez-Landete,
Alexandre Wagemakers
Abstract:
The massive deployment of light-emitting diode (LED) lightning infrastructure has opened the opportunity to reuse it as visible light communication (VLC) to leverage the current RF spectrum crisis in indoor scenarios. One of the main problems in VLC is the limited dynamic range of LEDs and their nonlinear response, which may lead to a severe degradation in the communication, and more specifically…
▽ More
The massive deployment of light-emitting diode (LED) lightning infrastructure has opened the opportunity to reuse it as visible light communication (VLC) to leverage the current RF spectrum crisis in indoor scenarios. One of the main problems in VLC is the limited dynamic range of LEDs and their nonlinear response, which may lead to a severe degradation in the communication, and more specifically in the bit error rate (BER). This is aggravated by the extensive usage of multicarrier multiplexing, based on optical orthogonal frequency division multiplexing (O-OFDM), characterized by a high peak-to-average power ratio. Here, we present a chaos-based coded modulation (CCM) setup specifically adapted to the LED nonlinearities. It replaces the usual modulation, while kee** the multicarrier O-OFDM structure unchanged. First, we obtain a semi-analytical bound for the bit error probability, taking into account the LED nonlinear response. The bound results particularly tight for the range of signal-to-noise ratio of interest. Then, we propose a method to design the modulator based on optimization techniques. The objective function is the semi-analytical bound, and the optimization is applied to a parameterization of the CCM conjugation function. This appropriately shapes the chaotic waveform and leads to BER improvements that outperform classical counterparts under ideal predistortion.
△ Less
Submitted 17 April, 2020; v1 submitted 16 April, 2020;
originally announced April 2020.
-
A Spatial Time-Frequency Hop** Index Modulated Scheme in Turbulence-free Optical Wireless Communication Channels
Authors:
Francisco J. Escribano,
Alexandre Wagemakers,
Georges Kaddoum,
Joao V. C. Evangelista
Abstract:
In this article, we propose an index modulation system suitable for optical communications, where the intensity of the light is modulated along the time, space and frequency dimensions, building a Frequency-Hop** Spatial Multi-Pulse Position Modulation (FH-SMPPM). We analyze its performance from the point of view of its efficiency in power and spectrum, and its implementation complexity and requ…
▽ More
In this article, we propose an index modulation system suitable for optical communications, where the intensity of the light is modulated along the time, space and frequency dimensions, building a Frequency-Hop** Spatial Multi-Pulse Position Modulation (FH-SMPPM). We analyze its performance from the point of view of its efficiency in power and spectrum, and its implementation complexity and required receiver latency. We analyze its error probability in the case of the non-turbulent free-space optical (FSO) channel. We derive formulas for the average symbol and bit error probabilities, and the simulation results show that they are tight enough for a wide range of signal-to-noise ratios and system parameters. We compare FH-SMPPM with other proposed index modulated systems of the same nature, and we highlight its distinctive advantages, like the flexibility to build an appropriate waveform under different constraints and objectives. Moreover, FH-SMPPM shows to be better performing in BER/SER and/or offer advantages in efficiency with respect to those alternatives, thus offering the possibility to be adopted for a variety of contexts.
△ Less
Submitted 20 April, 2020; v1 submitted 6 April, 2020;
originally announced April 2020.
-
Adaptive Multi-Receiver Coded Slotted ALOHA for Indoor Optical Wireless Communications
Authors:
Dejan Vukobratovic,
Francisco J. Escribano
Abstract:
In this paper, we design a novel high-throughput random access scheme for an indoor optical wireless communication (OWC) massive Internet of Things (IoT) scenario. Due to the large density of both IoT devices and OWC access points (APs), we base the proposed scheme on multi-receiver coded slotted ALOHA. In this scenario, collisions at APs are resolved by a centralized interference cancellation dec…
▽ More
In this paper, we design a novel high-throughput random access scheme for an indoor optical wireless communication (OWC) massive Internet of Things (IoT) scenario. Due to the large density of both IoT devices and OWC access points (APs), we base the proposed scheme on multi-receiver coded slotted ALOHA. In this scenario, collisions at APs are resolved by a centralized interference cancellation decoder that may exploit both spatial and temporal diversity. By applying adaptive control of each OWC AP field of view (FOV), the proposed system is able to dynamically adapt to different IoT device activation rates, in order to maintain a high total throughput. Using illustrative simulation results, we demonstrate the design methodology and performance possibilities of the proposed method.
△ Less
Submitted 17 April, 2020; v1 submitted 24 February, 2020;
originally announced February 2020.
-
Finite element simulation of the structural integrity of endothelial cell monolayers: a step for tumor cell extravasation
Authors:
A. Nieto,
J. Escribano,
F. Spill,
J. M. Garcia-Aznar,
M. J. Gomez-Benito
Abstract:
Cell extravasation is a crucial step of the metastatic cascade. In this process, the circulating tumor cells inside the blood vessels adhere to the cell monolayer of the blood vessel wall and passes through it, which allows them to invade different organs and complete metastasis. In this process, it is relevant to understand how the adhesions between cells that form the endothelial monolayer are b…
▽ More
Cell extravasation is a crucial step of the metastatic cascade. In this process, the circulating tumor cells inside the blood vessels adhere to the cell monolayer of the blood vessel wall and passes through it, which allows them to invade different organs and complete metastasis. In this process, it is relevant to understand how the adhesions between cells that form the endothelial monolayer are broken, resulting in intra-cellular gaps through which tumor cells are able to extravasate the blood vessel wall.
Within this process, we focus on studying the dynamics of cell-cell junctions rupture produced in the endothelial monolayer by the effect of Calcium waves. The regulation of this monolayer is of vital importance, not only in metastasis, but also in diseases such as pulmonary edema or atherosclerosis.
In order to understand this rupture dynamics in greater depth, we propose a hybrid model that simulates endothelial cells as \textcolor{black}{an} elastic material and cell-cell adhesions of the monolayer by means of a catch bond law.
We study the effects that the cell contraction caused by a Calcium wave presents on the endothelial monolayer depending on the diameter of the blood vessel. For this purpose, we develop a three-dimensional model to study the effect of the different blood vessel diameters.
The results indicate that there are greater tractions on the joints located in vertices common to several cells. This led to the formation of openings in the endothelial monolayer, through which extravasation of tumor cells could occur. For the different geometries studied, no significant effect of the blood vessel diameter on the rupture of the adhesions of monolayer is observed.
△ Less
Submitted 29 November, 2019;
originally announced November 2019.
-
Performance Analysis of QAM-MPPM in Turbulence-Free FSO Channels: Accurate Derivations and Practical Approximations
Authors:
Francisco J. Escribano,
Alexandre Wagemakers
Abstract:
Following the trends of index modulated (IM) techniques for optical communications, in the last few years several new waveform proposals have been made, aiming at conveying a higher density of information by driving different signal properties. One of these proposals mixes multi-pulse pulse-position modulation (MPPM) and quadrature amplitude modulation (QAM) in a system called QAM-MPPM. We present…
▽ More
Following the trends of index modulated (IM) techniques for optical communications, in the last few years several new waveform proposals have been made, aiming at conveying a higher density of information by driving different signal properties. One of these proposals mixes multi-pulse pulse-position modulation (MPPM) and quadrature amplitude modulation (QAM) in a system called QAM-MPPM. We present here a new way to demodulate its compound waveform, and, for the non-turbulent free space optical (FSO) channel, we provide accurate analytical expressions for its error probabilities, both in the case of the traditional and the new detector. Based on these analytical derivations, we also provide simplified expressions for the estimation of the error probabilities. We show that the new detector offers a gain of some tenths of dB in signal-to-noise ratio with respect to the previously defined one without an increase in complexity, and that our error probability estimations are more accurate than previously published results. To the best of our knowledge, this work is the first to provide simulation results validating the study of the error probability performance of QAM-MPPM.
△ Less
Submitted 6 April, 2020; v1 submitted 18 June, 2019;
originally announced June 2019.
-
Design and Performance Analysis of an Index Time Frequency Modulation Scheme for Optical Communications
Authors:
Francisco J. Escribano,
Alexandre Wagemakers,
Georges Kaddoum,
Joao V. C. Evangelista
Abstract:
In this article, we propose an index modulation system suitable for optical communications, based on jointly driving the time and frequency of the signal: an index-time frequency hop** (I-TFH) system. We analyze its performance from the point of view of its efficiency in power and spectrum, and its behavior in terms of error probability for the non-turbulent free-space optical (FSO) channel. We…
▽ More
In this article, we propose an index modulation system suitable for optical communications, based on jointly driving the time and frequency of the signal: an index-time frequency hop** (I-TFH) system. We analyze its performance from the point of view of its efficiency in power and spectrum, and its behavior in terms of error probability for the non-turbulent free-space optical (FSO) channel. We compare I-TFH with already proposed index modulated systems of the same nature, but where the amplitude or the number of transmitters are driven instead of the signal frequency. We derive and compare approximations for the average symbol and bit error probabilities of all these systems. The simulation results show that said approximations are tight enough for a wide range of signal-to-noise ratios and system parameters. Moreover, I-TFH shows to be better performing in BER and/or power efficiency than the comparative alternatives, and may offer interesting properties in a variety of contexts.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Chaos-Based Anytime Reliable Coded Communications
Authors:
Alberto Tarable,
Francisco J. Escribano
Abstract:
Anytime reliable communication systems are needed in contexts where the property of vanishing error probability with time is critical. This is the case of unstable real time systems that are to be controlled through the transmission and processing of remotely sensed data. The most successful anytime reliable transmission systems developed so far are based on channel codes and channel coding theory…
▽ More
Anytime reliable communication systems are needed in contexts where the property of vanishing error probability with time is critical. This is the case of unstable real time systems that are to be controlled through the transmission and processing of remotely sensed data. The most successful anytime reliable transmission systems developed so far are based on channel codes and channel coding theory. In this work, another focus is proposed, placing the stress on the waveform level rather than just on the coding level. This alleviates the coding and decoding complexity problems faced by other proposals. To this purpose, chaos theory is successfully exploited in order to design two different anytime reliable alternatives. The anytime reliability property is formally demonstrated in each case for the AWGN channel, under given conditions. The simulation results shown validate the theoretical developments, and demonstrate that these systems can achieve anytime reliability with affordable resource expenditure.
△ Less
Submitted 17 April, 2019;
originally announced April 2019.
-
Balance of Mechanical Forces Drives Endothelial Gap Formation and May Facilitate Cancer and Immune-Cell Extravasation
Authors:
Jorge Escribano,
Michelle B. Chen,
Emad Moeendarbary,
Xuan Cao,
Vivek Shenoy,
Jose Manuel Garcia-Aznar,
Roger D. Kamm,
Fabian Spill
Abstract:
The formation of gaps in the endothelium is a crucial process underlying both cancer and immune cell extravasation, contributing to the functioning of the immune system during infection, the unfavorable development of chronic inflammation and tumor metastasis. Here, we present a stochastic-mechanical multiscale model of an endothelial cell monolayer and show that the dynamic nature of the endothel…
▽ More
The formation of gaps in the endothelium is a crucial process underlying both cancer and immune cell extravasation, contributing to the functioning of the immune system during infection, the unfavorable development of chronic inflammation and tumor metastasis. Here, we present a stochastic-mechanical multiscale model of an endothelial cell monolayer and show that the dynamic nature of the endothelium leads to spontaneous gap formation, even without intervention from the transmigrating cells. These gaps preferentially appear at the vertices between three endothelial cells, as opposed to the border between two cells. We quantify the frequency and lifetime of these gaps, and validate our predictions experimentally. Interestingly, we find experimentally that cancer cells also preferentially extravasate at vertices, even when they first arrest on borders. This suggests that extravasating cells, rather than initially signaling to the endothelium, might exploit the autonomously forming gaps in the endothelium to initiate transmigration.
△ Less
Submitted 22 November, 2018;
originally announced November 2018.
-
Cryogenic magnetic coil and superconducting magnetic shield for neutron electric dipole moment searches
Authors:
S. Slutsky,
C. M. Swank,
A. Biswas,
R. Carr,
J. Escribano,
B. W. Filippone,
W. C. Griffith,
M. Mendenhall,
N. Nouri,
C. Osthelder,
A. Pérez Galván,
R. Picker,
B. Plaster
Abstract:
A magnetic coil operated at cryogenic temperatures is used to produce spatial, relative field gradients below 6 ppm/cm, stable for several hours. The apparatus is a prototype of the magnetic components for a neutron electric dipole moment (nEDM) search, which will take place at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory using ultra-cold neutrons (UCN). That search require…
▽ More
A magnetic coil operated at cryogenic temperatures is used to produce spatial, relative field gradients below 6 ppm/cm, stable for several hours. The apparatus is a prototype of the magnetic components for a neutron electric dipole moment (nEDM) search, which will take place at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory using ultra-cold neutrons (UCN). That search requires a uniform magnetic field to mitigate systematic effects and obtain long polarization lifetimes for neutron spin precession measurements. This paper details upgrades to a previously described apparatus, particularly the introduction of super-conducting magnetic shielding and the associated cryogenic apparatus. The magnetic gradients observed are sufficiently low for the nEDM search at SNS.
△ Less
Submitted 20 June, 2017; v1 submitted 10 January, 2017;
originally announced January 2017.
-
Fray Juan de Ortega's approximations, 500 years after
Authors:
Manuel Benito,
Jose Javier Escribano,
Emilio Fernández,
Mercedes Sánchez
Abstract:
In 1512, on December 30, the first edition of Fray Juan de Ortega's Arithmetic was published in Lyon. The last chapter, titled "Rules of Geometry", deals with lower approximations of 14 square roots. In later editions of the Arithmetic on 1534, 1537 and 1542 in Seville, these values are replaced by upper approximations. Twelve of them verify the Pell's equation, and so they are optimal. At this mo…
▽ More
In 1512, on December 30, the first edition of Fray Juan de Ortega's Arithmetic was published in Lyon. The last chapter, titled "Rules of Geometry", deals with lower approximations of 14 square roots. In later editions of the Arithmetic on 1534, 1537 and 1542 in Seville, these values are replaced by upper approximations. Twelve of them verify the Pell's equation, and so they are optimal. At this moment nobody knows the way they were obtained. In this paper we show how these approximations can be obtained through a method consistent with the mathematical knowledge at that time.
△ Less
Submitted 14 October, 2020; v1 submitted 5 December, 2012;
originally announced December 2012.