-
Evidence of Hot Carrier Extraction in Metal Halide Perovskite Solar Cells
Authors:
S. Sourabh,
H. Afshari,
V. R. Whiteside,
G. E. Eperon,
R. A. Scheidt,
T. D. Creason,
M. Furis,
A. Kirmani,
B. Saparov,
J. M. Luther,
M. C. Beard,
I. R. Sellers
Abstract:
The presence of hot carriers is presented in the operational properties of an (FA,Cs)Pb(I, Br, Cl)3 solar cell at ambient temperatures and under practical solar concentration. At 100 K, clear evidence of hot carriers is observed in both the high energy tail of the photoluminescence spectra and from the appearance of a non-equilibrium photocurrent at higher fluence in light J-V measurements. At roo…
▽ More
The presence of hot carriers is presented in the operational properties of an (FA,Cs)Pb(I, Br, Cl)3 solar cell at ambient temperatures and under practical solar concentration. At 100 K, clear evidence of hot carriers is observed in both the high energy tail of the photoluminescence spectra and from the appearance of a non-equilibrium photocurrent at higher fluence in light J-V measurements. At room temperature, however, the presence of hot carriers in the emission at elevated laser fluence are shown to compete with a gradual red shift in the PL peak energy as photo induced halide segregation begins to occur at higher lattice temperature. The effects of thermionic emission of hot carriers and the presence of a non-equilibrium carrier distribution are also shown to be distinct from simple lattice heating. This results in large unsaturated photocurrents at high powers as the Fermi distribution exceeds that of the heterointerface controlling carrier transport and rectification.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Dimethylammonium additives alter both vertical and lateral composition in halide perovskite semiconductors
Authors:
Sarthak Jariwala,
Rishi Kumar,
Giles E. Eperon,
Yangwei Shi,
David Fenning,
David S. Ginger
Abstract:
Adding a large A-site cation, such as dimethylammonium (DMA), to the perovskite growth solution has been shown to improve performance and long-term operational stability of halide perovskite solar cells. To better understand the origins of these improvements, we explore the changes in film structure, composition, and optical properties of a formamidinium (FA), Cs, Pb, mixed halide perovskite follo…
▽ More
Adding a large A-site cation, such as dimethylammonium (DMA), to the perovskite growth solution has been shown to improve performance and long-term operational stability of halide perovskite solar cells. To better understand the origins of these improvements, we explore the changes in film structure, composition, and optical properties of a formamidinium (FA), Cs, Pb, mixed halide perovskite following addition of DMA to the perovskite growth solution in the ratio DMA0.1FA0.6Cs0.3Pb(I0.8Br0.2)3. Using time-of-flight secondary-ion mass spectrometry (TOF-SIMS) we show that DMA is indeed incorporated into the perovskite, with a higher DMA concentration at the surface. Using a combination of PL microscopy and photo-induced force microscopy-based (PiFM) nanoinfrared (nanoIR), we demonstrate that incorporating DMA into the film leads to increased local heterogeneity in the local bandgap, and clustering of the local formamidinium (CH5N2+) composition. In addition, using nano-X-ray diffraction, we demonstrate that DMA incorporation also alters the local structural composition by changing the local d-spacing distribution and grain size. Our results suggest that compositional variations in the organic cations at the A-site drive the structural heterogeneity observed in case of DMA incorporated films. Our results also suggest that while current-DMA-additive based approaches do have benefits to operational stability and device performance, process optimization to achieve local compositional and structural homogeneity could further boost both of these gains in performance, bringing further gains to solar cells using DMA additives.
△ Less
Submitted 21 October, 2021;
originally announced October 2021.
-
Relaxed current matching requirements in highly luminescent perovskite tandem solar cells and their fundamental efficiency limits
Authors:
Alan R. Bowman,
Felix Lang,
Yu-Hsien Chiang,
Alberto Jiménez-Solano,
Kyle Frohna,
Giles E. Eperon,
Edoardo Ruggeri,
Mojtaba Abdi-Jalebi,
Miguel Anaya,
Bettina V. Lotsch,
Samuel D. Stranks
Abstract:
Here we use time-resolved and steady-state optical spectroscopy on state-of-the-art low- and high-bandgap perovskite films for tandems to quantify intrinsic recombination rates and absorption coefficients. We apply these data to calculate the limiting efficiency of perovskite-silicon and all-perovskite two-terminal tandems employing currently available bandgap materials as 42.0 % and 40.8 % respec…
▽ More
Here we use time-resolved and steady-state optical spectroscopy on state-of-the-art low- and high-bandgap perovskite films for tandems to quantify intrinsic recombination rates and absorption coefficients. We apply these data to calculate the limiting efficiency of perovskite-silicon and all-perovskite two-terminal tandems employing currently available bandgap materials as 42.0 % and 40.8 % respectively. By including luminescence coupling between sub-cells, i.e. the re-emission of photons from the high-bandgap sub-cell and their absorption in the low-bandgap sub-cell, we reveal the stringent need for current matching is relaxed when the high-bandgap sub-cell is a luminescent perovskite compared to calculations that do not consider luminescence coupling. We show luminescence coupling becomes important in all-perovskite tandems when charge carrier trap** rates are < 10$^{6}$ s$^{-1}$ (corresponding to carrier lifetimes longer than 1 $μ$s at low excitation densities) in the high-bandgap sub-cell, which is lowered to 10$^{5}$ s$^{-1}$ in the better-bandgap-matched perovskite-silicon cells. We demonstrate luminescence coupling endows greater flexibility in both sub-cell thicknesses, increased tolerance to different spectral conditions and a reduction in the total thickness of light absorbing layers. To maximally exploit luminescence coupling we reveal a key design rule for luminescent perovskite-based tandems: the high-bandgap sub-cell should always have the higher short-circuit current. Importantly, this can be achieved by reducing the bandgap or increasing the thickness in the high-bandgap sub-cell with minimal reduction in efficiency, thus allowing for wider, unstable bandgap compositions (>1.7 eV) to be avoided. Finally, we experimentally visualise luminescence coupling in an all-perovskite tandem device stack through cross-section luminescence images.
△ Less
Submitted 1 December, 2020;
originally announced December 2020.
-
Approaching the limits of optoelectronic performance in mixed cation mixed halide perovskites by controlling surface recombination
Authors:
Sarthak Jariwala,
Sven Burke,
Sean Dunfield,
Clayton Shallcross,
Margherita Taddei,
Jian Wang,
Giles E. Eperon,
Neal R. Armstrong,
Joseph J. Berry,
David S. Ginger
Abstract:
We demonstrate the critical role of surface recombination in mixed-cation, mixed-halide perovskite, FA0.83Cs0.17Pb(I0.85Br0.15)3. By passivating non-radiative defects with the polymerizable Lewis base (3-aminopropyl)trimethoxysilane (APTMS) we transform these thin films. We demonstrate average minority carrier lifetimes > 4 μs, nearly single exponential monomolecular PL decays, and concomitantly h…
▽ More
We demonstrate the critical role of surface recombination in mixed-cation, mixed-halide perovskite, FA0.83Cs0.17Pb(I0.85Br0.15)3. By passivating non-radiative defects with the polymerizable Lewis base (3-aminopropyl)trimethoxysilane (APTMS) we transform these thin films. We demonstrate average minority carrier lifetimes > 4 μs, nearly single exponential monomolecular PL decays, and concomitantly high external photoluminescence quantum efficiencies (>20%, corresponding to ~97% of the maximum theoretical quasi-Fermi-level splitting) at low excitation fluence. We confirm both the composition and valence band edge position of the FA0.83Cs0.17Pb(I0.85Br0.15)3 perovskite using multi-institution, cross-validated, XPS and UPS measurements. We extend the APTMS surface passivation to higher bandgap double cation (FA,Cs) compositions (1.7 eV, 1.75 eV and 1.8 eV) as well as the widely used triple cation (FA,MA,Cs) composition and observe significant PL and PL lifetime improvements after surface passivation. Finally, we demonstrate that the average surface recombination velocity (SRV) decreases from ~1000 cm/s to ~10 cm/s post APTMS passivation for FA0.83Cs0.17Pb(I0.85Br0.15)3. Our results demonstrate that surface-mediated recombination is the primary non-radiative loss pathway in MA-free mixed-cation mixed-halide films with a range of different bandgaps, which is a problem observed for a wide range of perovskite active layers and reactive electrical contacts. This study indicates that surface passivation and contact engineering will enable near-theoretical device efficiencies with these materials.
△ Less
Submitted 6 June, 2020;
originally announced June 2020.
-
Microseconds, milliseconds and seconds: deconvoluting the dynamic behaviour of planar perovskite solar cells
Authors:
Adam Pockett,
Giles Eperon,
Nobuya Sakai,
Henry Snaith,
Laurence M Peter,
Petra J Cameron
Abstract:
Perovskite solar cells (PSC) are shown to behave as coupled ionic-electronic conductors with strong evidence that the ionic environment moderates both the rate of electron-hole recombination and the band offsets in planar PSC. Numerous models have been presented to explain the behavior of perovskite solar cells, but to date no single model has emerged that can explain both the frequency and time d…
▽ More
Perovskite solar cells (PSC) are shown to behave as coupled ionic-electronic conductors with strong evidence that the ionic environment moderates both the rate of electron-hole recombination and the band offsets in planar PSC. Numerous models have been presented to explain the behavior of perovskite solar cells, but to date no single model has emerged that can explain both the frequency and time dependent response of the devices. Here we present a straightforward coupled ionic-electronic model that can be used to explain the large amplitude transient behavior and the impedance response of PSC.
△ Less
Submitted 14 October, 2016;
originally announced October 2016.
-
Perovskite-perovskite tandem photovoltaics with optimized bandgaps
Authors:
Giles E. Eperon,
Tomas Leijtens,
Kevin A. Bush,
Rohit Prasanna,
Thomas Green,
Jacob Tse-Wei Wang,
David P. McMeekin,
George Volonakis,
Rebecca L. Milot,
Richard May,
Axel Palmstrom,
Daniel J. Slotcavage,
Rebecca A. Belisle,
Jay B. Patel,
Elizabeth S. Parrott,
Rebecca J. Sutton,
Wen Ma,
Farhad Moghadam,
Bert Conings,
Aslihan Babayigit,
Hans-Gerd Boyen,
Stacey Bent,
Feliciano Giustino,
Laura M. Herz,
Michael B. Johnston
, et al. (2 additional authors not shown)
Abstract:
We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of…
▽ More
We demonstrate four and two-terminal perovskite-perovskite tandem solar cells with ideally matched bandgaps. We develop an infrared absorbing 1.2eV bandgap perovskite, $FA_{0.75}Cs_{0.25}Sn_{0.5}Pb_{0.5}I_3$, that can deliver 14.8 % efficiency. By combining this material with a wider bandgap $FA_{0.83}Cs_{0.17}Pb(I_{0.5}Br_{0.5})_3$ material, we reach monolithic two terminal tandem efficiencies of 17.0 % with over 1.65 volts open-circuit voltage. We also make mechanically stacked four terminal tandem cells and obtain 20.3 % efficiency. Crucially, we find that our infrared absorbing perovskite cells exhibit excellent thermal and atmospheric stability, unprecedented for Sn based perovskites. This device architecture and materials set will enable 'all perovskite' thin film solar cells to reach the highest efficiencies in the long term at the lowest costs.
△ Less
Submitted 20 January, 2017; v1 submitted 12 August, 2016;
originally announced August 2016.
-
Spatially resolved studies of the phases and morphology of methylammonium and formamidinium lead tri-halide perovskites
Authors:
K. Galkowski,
A. Mitioglu,
A. Surrente,
Z. Yang,
D. K. Maude,
P. Kossacki,
G. E. Eperon,
J. T-W. Wang,
H. J. Snaith,
P. Plochocka,
R. J. Nicholas
Abstract:
The family of organic-inorganic tri-halide perovskites including MA (MethylAmmonium)PbI$_{3}$, MAPbI$_{3-x}$Cl$_{x}$, FA (FormAmidinium)PbI$_{3}$ and FAPbBr$_{3}$ are having a tremendous impact on the field of photovoltaic cells due to their ease of deposition and efficiencies, but device performance can be significanly affected by inhomogeneities. Here we report a study of temperature dependent m…
▽ More
The family of organic-inorganic tri-halide perovskites including MA (MethylAmmonium)PbI$_{3}$, MAPbI$_{3-x}$Cl$_{x}$, FA (FormAmidinium)PbI$_{3}$ and FAPbBr$_{3}$ are having a tremendous impact on the field of photovoltaic cells due to their ease of deposition and efficiencies, but device performance can be significanly affected by inhomogeneities. Here we report a study of temperature dependent micro-photoluminescence which shows a strong spatial inhomogeneity related to the presence of microcrystalline grains, which can be both light and dark. In all of the tri-iodide based materials there is evidence that the tetragonal to orthorhombic phase transition observed around 160K does not occur uniformly across the sample with domain formation related to the underlying microcrystallite grains, some of which remain in the high temperature, tetragonal, phase even at very low temperatures. At low temperature the tetragonal domains can be significantly influenced by local defects in the layers. In FAPbBr$_{3}$ a more macroscopic domain structure is observed with large numbers of grains forming phase correlated regions.
△ Less
Submitted 10 June, 2016;
originally announced June 2016.
-
Determination of the exciton binding energy and effective masses for the methylammonium and formamidinium lead tri-halide perovskite family
Authors:
Krzysztof Galkowski,
Anatolie Mitioglu,
Atsuhiko Miyata,
Paulina Plochocka,
Oliver Portugall,
Giles E. Eperon,
Jacob Tse-Wei Wang,
Thomas Stergiopoulos,
Samuel D. Stranks,
Henry J. Snaith,
Robin J. Nicholas
Abstract:
The family of organic-inorganic halide perovskite materials has generated tremendous interest in the field of photovoltaics due to their high power conversion efficiencies. There has been intensive development of cells based on the archetypal methylammonium (MA)and recently introduced formamidinium (FA) materials, however, there is still considerable controversy over their fundamental electronic p…
▽ More
The family of organic-inorganic halide perovskite materials has generated tremendous interest in the field of photovoltaics due to their high power conversion efficiencies. There has been intensive development of cells based on the archetypal methylammonium (MA)and recently introduced formamidinium (FA) materials, however, there is still considerable controversy over their fundamental electronic properties. Two of the most important parameters are the binding energy of the exciton (R$^{*}$) and its reduced effective mass $μ$. Here we present extensive magneto optical studies of Cl assisted grown MAPbI$_{3}$ as well as MAPbBr$_{3}$ and the FA based materials FAPbI$_{3}$ and FAPbBr$_{3}$. We fit the excitonic states as a hydrogenic atom in magnetic field and the Landau levels for free carriers to give R$^{*}$ and $μ$. The values of the exciton binding energy are in the range 14 - 25 meV in the low temperature phase and fall considerably at higher temperatures for the tri-iodides, consistent with free carrier behaviour in all devices made from these materials. Both R$^{*}$ and $μ$ increase approximately proportionally to the band gap, and the mass values, 0.09-0.117 m$_{0}$, are consistent with a simple \textbf{k.p} perturbation approach to the band structure which can be generalized to predict values for the effective mass and binding energy for other members of this perovskite family of materials.
△ Less
Submitted 20 November, 2015;
originally announced November 2015.
-
Non-ferroelectric nature of the conductance hysteresis in CH3NH3PbI3 perovskite-based photovoltaic devices
Authors:
J. Beilsten-Edmands,
G. E. Eperon,
R. D. Johnson,
H. J. Snaith,
P. G. Radaelli
Abstract:
We present measurements of conductance hysteresis on CH3NH3PbI3 perovskite thin films, performed using the double-wave method, in order to investigate the possibility of a ferroelectric response. A strong frequency dependence of the hysteresis is observed in the range of 0.1 Hz to 150 Hz, with a hysteretic charge density in excess of 1000 μC/cm2 at frequencies below 0.4 Hz - a behaviour uncharacte…
▽ More
We present measurements of conductance hysteresis on CH3NH3PbI3 perovskite thin films, performed using the double-wave method, in order to investigate the possibility of a ferroelectric response. A strong frequency dependence of the hysteresis is observed in the range of 0.1 Hz to 150 Hz, with a hysteretic charge density in excess of 1000 μC/cm2 at frequencies below 0.4 Hz - a behaviour uncharacteristic of a ferroelectric response. We show that the observed hysteretic conductance, as well as the presence of a double arc in the impedance spectroscopy, can be fully explained by the migration of mobile ions under bias on a timescale of seconds. Our measurements place an upper limit of approximately 1 μC/cm2 on any intrinsic frequency-independent polarisation, ruling out ferroelectricity as the main cause of current-voltage hysteresis and providing further evidence of the importance of ionic migration in modifying the efficiency of CH3NH3PbI3 devices.
△ Less
Submitted 21 April, 2015;
originally announced April 2015.
-
Steric engineering of metal-halide perovskites with tunable optical band gaps
Authors:
Marina R. Filip,
Giles E. Eperon,
Henry J. Snaith,
Feliciano Giustino
Abstract:
Owing to their high energy-conversion efficiency and inexpensive fabrication routes, solar cells based on metal-organic halide perovskites have rapidly gained prominence as a disruptive technology. An attractive feature of perovskite absorbers is the possibility of tailoring their properties by changing the elemental composition through the chemical precursors. In this context, rational in silico…
▽ More
Owing to their high energy-conversion efficiency and inexpensive fabrication routes, solar cells based on metal-organic halide perovskites have rapidly gained prominence as a disruptive technology. An attractive feature of perovskite absorbers is the possibility of tailoring their properties by changing the elemental composition through the chemical precursors. In this context, rational in silico design represents a powerful tool for map** the vast materials landscape and accelerating discovery. Here we show that the optical band gap of metal-halide perovskites, a key design parameter for solar cells, strongly correlates with a simple structural feature, the largest metal-halide-metal bond angle. Using this descriptor we suggest continuous tunability of the optical gap from the mid-infrared to the visible. Precise band gap engineering is achieved by controlling the bond angles through the steric size of the molecular cation. Based on these design principles we predict novel low-gap perovskites for optimum photovoltaic efficiency, and we demonstrate the concept of band gap modulation by synthesising and characterising novel mixed-cation perovskites.
△ Less
Submitted 23 September, 2014;
originally announced September 2014.