-
The Garber Current Pattern: An Additional Contribution to AC Losses in Helical HTS Cables?
Authors:
Steffen Elschner,
Andrej Kudymow,
Nicolo Riva,
Francesco Grilli
Abstract:
Conductors made of high-temperature (HTS) wires helically wound in one or more layers on round tubes (CORT) are compact, flexible, and can carry a large amount of current. Although these conductors were initially developed for DC applications, e.g. in magnets, it is worth considering their use for AC, e.g. in underground cables for medium voltage grids and with currents in the kA-range. In these c…
▽ More
Conductors made of high-temperature (HTS) wires helically wound in one or more layers on round tubes (CORT) are compact, flexible, and can carry a large amount of current. Although these conductors were initially developed for DC applications, e.g. in magnets, it is worth considering their use for AC, e.g. in underground cables for medium voltage grids and with currents in the kA-range. In these cases, the major challenge is reducing AC losses. In contrast to a straight superconducting wire, in a helical arrangement, due to superconducting shielding, the current does not follow the direction of the wires, but takes a non-trivial zig-zag path within the individual HTS wires (Garber pattern). This includes current components across the thickness of the superconducting layers, so that the often used thin-shell approximation does not hold. In this contribution, we studied a one-layer three-wire CORT by means of fully three-dimensional simulations, based on the H-formulation of Maxwell's equations implemented in the commercial software package COMSOL Multiphysics. As a result of our simulations, the peculiar current profiles were confirmed. In addition, the influence of current, pitch angle, and frequency on the AC losses was studied. We found an optimum for the pitch angle and that the current profiles strongly depend on frequency.
△ Less
Submitted 24 February, 2024; v1 submitted 13 September, 2023;
originally announced September 2023.
-
New Experimental Method for Investigating AC-losses in Concentric HTS Power Cables
Authors:
Steffen Elschner,
Eduard Demencik,
Bruno Douine,
Francesco Grilli,
Andrej Kudymow,
Mark Stemmle,
Severin Strauss,
Victor Zermeno,
Wilfried Goldacker
Abstract:
The optimization of a HTS cable design with respect to AC-losses is of crucial importance for the economic viability of the respective concept. However the experimental determination of AC-losses is not straightforward since for short cable samples the distribution of current among the super-conducting tapes is mainly determined by the contact resistances of the individual tapes. The resulting inh…
▽ More
The optimization of a HTS cable design with respect to AC-losses is of crucial importance for the economic viability of the respective concept. However the experimental determination of AC-losses is not straightforward since for short cable samples the distribution of current among the super-conducting tapes is mainly determined by the contact resistances of the individual tapes. The resulting inhomogeneous current distribution definitely falsifies the results. To solve this experimental problem we present a new experimental technique. The setup is a 2m-long three phase concentric cable model for which, within each phase, the superconducting tapes (up to 30) are connected in series. The Cu-braid backwards conductors were assembled in a rotational symmetric cage type arrangement, such that their self fields at the cable cancel. If experimental peculiarities of this setup, as the strong inductive coupling between the phases and the suitable positioning of the voltage contact leads, are correctly taken into account, the currents can be controlled independently and the electrical properties of the cable can be measured unambiguously. In this paper preliminary results are presented. The work is part of the German government funded cable project AMPACITY (1 km / 20 kV/ 2 kA)
△ Less
Submitted 29 May, 2017; v1 submitted 4 November, 2014;
originally announced November 2014.
-
Shielding efficiency and E(J) characteristics measured on large melt cast Bi-2212 hollow cylinders in axial magnetic fields
Authors:
J-F Fagnard,
S Elschner,
J Bock,
M Dirickx,
B Vanderheyden,
P Vanderbemden
Abstract:
We show that tubes of melt cast Bi-2212 used as current leads for LTS magnets can also act as efficient magnetic shields. The magnetic screening properties under an axial DC magnetic field are characterized at several temperatures below the liquid nitrogen temperature (77 K). Two main shielding properties are studied and compared with those of Bi-2223, a material that has been considered in the pa…
▽ More
We show that tubes of melt cast Bi-2212 used as current leads for LTS magnets can also act as efficient magnetic shields. The magnetic screening properties under an axial DC magnetic field are characterized at several temperatures below the liquid nitrogen temperature (77 K). Two main shielding properties are studied and compared with those of Bi-2223, a material that has been considered in the past for bulk magnetic shields. The first property is related to the maximum magnetic flux density that can be screened, Blim; it is defined as the applied magnetic flux density below which the field attenuation measured at the centre of the shield exceeds 1000. For a cylinder of Bi-2212 with a wall thickness of 5 mm and a large ratio of length over radius, Blim is evaluated to 1 T at T = 10 K. This value largely exceeds the Blim value measured at the same temperature on similar tubes of Bi-2223. The second shielding property that is characterized is the dependence of Blim with respect to variations of the sweep rate of the applied field, dBapp/dt. This dependence is interpreted in terms of the power law E = Ec(J/Jc)^n and allows us to determine the exponent n of this E(J) characteristics for Bi-2212. The characterization of the magnetic field relaxation involves very small values of the electric field. This gives us the opportunity to experimentally determine the E(J) law in an unexplored region of small electric fields. Combining these results with transport and AC shielding measurements, we construct a piecewise E(J) law that spans over 8 orders of magnitude of the electric field.
△ Less
Submitted 27 July, 2010;
originally announced July 2010.
