-
Moiré patterns and inversion boundaries in graphene/hexagonal boron nitride bilayers
Authors:
K. R. Elder,
Zhi-Feng Huang,
T. Ala-Nissila
Abstract:
In this paper a systematic examination of graphene/hexagonal boron nitride (g/hBN) bilayers is presented, through a recently developed two-dimensional phase field crystal model that incorporates out-of-plane deformations. The system parameters are determined by closely matching the stacking energies and heights of graphene/hBN bilayers to those obtained from existing quantum-mechanical density fun…
▽ More
In this paper a systematic examination of graphene/hexagonal boron nitride (g/hBN) bilayers is presented, through a recently developed two-dimensional phase field crystal model that incorporates out-of-plane deformations. The system parameters are determined by closely matching the stacking energies and heights of graphene/hBN bilayers to those obtained from existing quantum-mechanical density functional theory calculations. Out-of-plane deformations are shown to reduce the energies of inversion domain boundaries in hBN, and the coupling between graphene and hBN layers leads to a bilayer defect configuration consisting of an inversion boundary in hBN and a domain wall in graphene. Simulations of twisted bilayers reveal the structure, energy, and elastic properties of the corresponding Moiré patterns, and show a crossover, as the misorientation angle between the layers increases, from a well-defined hexagonal network of domain boundaries and junctions to smeared-out patterns. The transition occurs when the thickness of domain walls approaches the size of the Moiré patterns, and coincides with the peaks in the average von Mises and volumetric stresses of the bilayer.
△ Less
Submitted 20 January, 2023;
originally announced January 2023.
-
Coarse-grained modeling of crystals by the amplitude expansion of the phase-field crystal model: an overview
Authors:
Marco Salvalaglio,
Ken R. Elder
Abstract:
Comprehensive investigations of crystalline systems often require methods bridging atomistic and continuum scales. In this context, coarse-grained mesoscale approaches are of particular interest as they allow the examination of large systems and time scales while retaining some microscopic details. The so-called Phase-Field Crystal (PFC) model conveniently describes crystals at diffusive time scal…
▽ More
Comprehensive investigations of crystalline systems often require methods bridging atomistic and continuum scales. In this context, coarse-grained mesoscale approaches are of particular interest as they allow the examination of large systems and time scales while retaining some microscopic details. The so-called Phase-Field Crystal (PFC) model conveniently describes crystals at diffusive time scales through a continuous periodic field which varies on atomic scales and is related to the atomic number density. To go beyond the restrictive atomic length scales of the PFC model, a complex amplitude formulation was first developed by Goldenfeld et al. [Phys. Rev. E 72, 020601 (2005)]. While focusing on length scales larger than the lattice parameter, this approach can describe crystalline defects, interfaces, and lattice deformations. It has been used to examine many phenomena including liquid/solid fronts, grain boundary energies, and strained films. This topical review focuses on this amplitude expansion of the PFC model and its developments. An overview of the derivation, connection to the continuum limit, representative applications, and extensions is presented. A few practical aspects, such as suitable numerical methods and examples, are illustrated as well. Finally, the capabilities and bounds of the model, current challenges, and future perspectives are addressed.
△ Less
Submitted 12 April, 2022; v1 submitted 8 February, 2022;
originally announced February 2022.
-
Mesoscale Defect Motion in Binary Systems: Effects of Compositional Strain and Cottrell Atmospheres
Authors:
Marco Salvalaglio,
Axel Voigt,
Zhi-Feng Huang,
Ken R. Elder
Abstract:
The velocity of dislocations is derived analytically to incorporate and predict the intriguing effects induced by the preferential solute segregation and Cottrell atmospheres in both two-dimensional and three-dimensional binary systems of various crystalline symmetries. The corresponding mesoscopic description of defect dynamics is constructed through the amplitude formulation of the phase-field c…
▽ More
The velocity of dislocations is derived analytically to incorporate and predict the intriguing effects induced by the preferential solute segregation and Cottrell atmospheres in both two-dimensional and three-dimensional binary systems of various crystalline symmetries. The corresponding mesoscopic description of defect dynamics is constructed through the amplitude formulation of the phase-field crystal model which has been shown to accurately capture elasticity and plasticity in a wide variety of systems. Modifications of the Peach-Koehler force as a result of solute concentration variations and compositional stresses are presented, leading to interesting new predictions of defect motion due to effects of Cottrell atmospheres. These include the deflection of dislocation glide paths, the variation of climb speed and direction, and the change or prevention of defect annihilation, all of which play an important role in determining the fundamental behaviors of complex defect network and dynamics. The analytic results are verified by numerical simulations.
△ Less
Submitted 13 May, 2021; v1 submitted 15 January, 2021;
originally announced January 2021.
-
Scaling up the lattice dynamics of amorphous materials by orders of magnitude
Authors:
Ivan Kriuchevskyi,
Vladimir V. Palyulin,
Rico Milkus,
Robert M. Elder,
Timothy W. Sirk,
Alessio Zaccone
Abstract:
We generalise the non-affine theory of viscoelasticity for use with large, well-sampled systems of arbitrary chemical complexity. Having in mind predictions of mechanical and vibrational properties of amorphous systems with atomistic resolution, we propose an extension of the Kernel Polynomial Method (KPM) for the computation of the vibrational density of states (VDOS) and the eigenmodes, includin…
▽ More
We generalise the non-affine theory of viscoelasticity for use with large, well-sampled systems of arbitrary chemical complexity. Having in mind predictions of mechanical and vibrational properties of amorphous systems with atomistic resolution, we propose an extension of the Kernel Polynomial Method (KPM) for the computation of the vibrational density of states (VDOS) and the eigenmodes, including the $Γ$-correlator of the affine force-field, which is a key ingredient of lattice-dynamic calculations of viscoelasticity. We show that the results converge well to the solution obtained by direct diagonalization (DD) of the Hessian (dynamical) matrix. As is well known, the DD approach has prohibitively high computational requirements for systems with $N=10^4$ atoms or larger. Instead, the KPM approach developed here allows one to scale up lattice dynamic calculations of real materials up to $10^6$ atoms, with a hugely more favorable (linear) scaling of computation time and memory consumption with $N$.
△ Less
Submitted 24 July, 2020; v1 submitted 23 July, 2020;
originally announced July 2020.
-
Towards Measuring Supply Chain Attacks on Package Managers for Interpreted Languages
Authors:
Ruian Duan,
Omar Alrawi,
Ranjita Pai Kasturi,
Ryan Elder,
Brendan Saltaformaggio,
Wenke Lee
Abstract:
Package managers have become a vital part of the modern software development process. They allow developers to reuse third-party code, share their own code, minimize their codebase, and simplify the build process. However, recent reports showed that package managers have been abused by attackers to distribute malware, posing significant security risks to developers and end-users. For example, esli…
▽ More
Package managers have become a vital part of the modern software development process. They allow developers to reuse third-party code, share their own code, minimize their codebase, and simplify the build process. However, recent reports showed that package managers have been abused by attackers to distribute malware, posing significant security risks to developers and end-users. For example, eslint-scope, a package with millions of weekly downloads in Npm, was compromised to steal credentials from developers. To understand the security gaps and the misplaced trust that make recent supply chain attacks possible, we propose a comparative framework to qualitatively assess the functional and security features of package managers for interpreted languages. Based on qualitative assessment, we apply well-known program analysis techniques such as metadata, static, and dynamic analysis to study registry abuse. Our initial efforts found 339 new malicious packages that we reported to the registries for removal. The package manager maintainers confirmed 278 (82%) from the 339 reported packages where three of them had more than 100,000 downloads. For these packages we were issued official CVE numbers to help expedite the removal of these packages from infected victims. We outline the challenges of tailoring program analysis tools to interpreted languages and release our pipeline as a reference point for the community to build on and help in securing the software supply chain.
△ Less
Submitted 2 December, 2020; v1 submitted 4 February, 2020;
originally announced February 2020.
-
Electromagnetic properties of $^{21}$O for benchmarking nuclear Hamiltonians
Authors:
S. Heil,
M. Petri,
K. Vobig,
D. Bazin,
J. Belarge,
P. Bender,
B. A. Brown,
R. Elder,
B. Elman,
A. Gade,
T. Haylett,
J. D. Holt,
T. Hüther,
A. Hufnagel,
H. Iwasaki,
N. Kobayashi,
C. Loelius,
B. Longfellow,
E. Lunderberg,
M. Mathy,
J. Menéndez,
S. Paschalis,
R. Roth,
A. Schwenk,
J. Simonis
, et al. (3 additional authors not shown)
Abstract:
The structure of exotic nuclei provides valuable tests for state-of-the-art nuclear theory. In particular electromagnetic transition rates are more sensitive to aspects of nuclear forces and many-body physics than excitation energies alone. We report the first lifetime measurement of excited states in $^{21}$O, finding $τ_{1/2^+}=420^{+35}_{-32}\text{(stat)}^{+34}_{-12}\text{(sys)}$\,ps. This resu…
▽ More
The structure of exotic nuclei provides valuable tests for state-of-the-art nuclear theory. In particular electromagnetic transition rates are more sensitive to aspects of nuclear forces and many-body physics than excitation energies alone. We report the first lifetime measurement of excited states in $^{21}$O, finding $τ_{1/2^+}=420^{+35}_{-32}\text{(stat)}^{+34}_{-12}\text{(sys)}$\,ps. This result together with the deduced level scheme and branching ratio of several $γ$-ray decays are compared to both phenomenological shell-model and ab initio calculations based on two- and three-nucleon forces derived from chiral effective field theory. We find that the electric quadrupole reduced transition probability of $\rm B(E2;1/2^+ \rightarrow 5/2^+_{g.s.}) = 0.71^{+0.07\ +0.02}_{-0.06\ -0.06}$~e$^2$fm$^4$, derived from the lifetime of the $1/2^+$ state, is smaller than the phenomenological result where standard effective charges are employed, suggesting the need for modifications of the latter in neutron-rich oxygen isotopes. We compare this result to both large-space and valence-space ab initio calculations, and by using multiple input interactions we explore the sensitivity of this observable to underlying details of nuclear forces.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Identifying non-affine softening modes in glassy polymer networks: A pathway to chemical design
Authors:
Robert M. Elder,
Alessio Zaccone,
Timothy W. Sirk
Abstract:
Using molecular simulations and theory, we develop an explicit map** of the contribution of molecular relaxation modes in glassy thermosets to the shear modulus, where the relaxations were tuned by altering the polarity of side groups. Specifically, motions at the domain, segmental, monomer, and atomic levels are taken from molecular dynamics snapshots and directly linked with the viscoelasticit…
▽ More
Using molecular simulations and theory, we develop an explicit map** of the contribution of molecular relaxation modes in glassy thermosets to the shear modulus, where the relaxations were tuned by altering the polarity of side groups. Specifically, motions at the domain, segmental, monomer, and atomic levels are taken from molecular dynamics snapshots and directly linked with the viscoelasticity through a framework based in the lattice dynamics of amorphous solids. This unique approach provides direct insight into the roles of chemical groups in the stress response, including the timescale and spatial extent of relaxations during mechanics. Two thermoset networks with differing concentrations of polar side groups were examined, dicyclopentadiene (DCPD) and 5-norbornene-2-methanol (NBOH). A machine learning method is found to be effective for quantifying large-scale correlated motions while more local chemical relaxations are readily identified by direct inspection. The approach is broadly applicable and enables rapid predictions of the frequency-dependent modulus for any glass.
△ Less
Submitted 11 October, 2019;
originally announced October 2019.
-
A coarse-grained phase-field crystal model of plastic motion
Authors:
Marco Salvalaglio,
Luiza Angheluta,
Zhi-Feng Huang,
Axel Voigt,
Ken R. Elder,
Jorge Viñals
Abstract:
The phase-field crystal model in its amplitude equation approximation is shown to provide an accurate description of the deformation field in defected crystalline structures, as well as of dislocation motion. We analyze in detail the elastic distortion and stress regularization at a dislocation core and show how the Burgers vector density can be directly computed from the topological singularities…
▽ More
The phase-field crystal model in its amplitude equation approximation is shown to provide an accurate description of the deformation field in defected crystalline structures, as well as of dislocation motion. We analyze in detail the elastic distortion and stress regularization at a dislocation core and show how the Burgers vector density can be directly computed from the topological singularities of the phase-field amplitudes. Distortions arising from these amplitudes are then supplemented with non-singular displacements to enforce mechanical equilibrium. This allows for the consistent separation of plastic and elastic time scales in this framework. A finite element method is introduced to solve the combined amplitude and elasticity equations, which is applied to a few prototypical configurations in two spatial dimensions for a crystal of triangular lattice symmetry: i) the stress field induced by an edge dislocation with an analysis of how the amplitude equation regularizes stresses near the dislocation core, ii) the motion of a dislocation dipole as a result of its internal interaction, and iii) the shrinkage of a rotated grain. We also compare our results with those given by other extensions of classical elasticity theory, such as strain-gradient elasticity and methods based on the smoothing of Burgers vector densities near defect cores.
△ Less
Submitted 30 December, 2019; v1 submitted 10 October, 2019;
originally announced October 2019.
-
Phase ordering, transformation, and grain growth of two-dimensional binary colloidal crystals: A phase field crystal modeling
Authors:
Doaa Taha,
S. R. Dlamini,
S. K. Mkhonta,
K. R. Elder,
Zhi-Feng Huang
Abstract:
The formation and dynamics of a wide variety of binary two-dimensional ordered structures and superlattices are investigated through a phase field crystal model with sublattice ordering. Various types of binary ordered phases, the phase diagrams, and the grain growth dynamics and structural transformation processes, including the emergence of topological defects, are examined. The results are comp…
▽ More
The formation and dynamics of a wide variety of binary two-dimensional ordered structures and superlattices are investigated through a phase field crystal model with sublattice ordering. Various types of binary ordered phases, the phase diagrams, and the grain growth dynamics and structural transformation processes, including the emergence of topological defects, are examined. The results are compared to the ordering and assembly of two-component colloidal systems. Two factors governing the binary phase ordering are identified, the coupling and competition between the length scales of two sublattices and the selection of average particle densities of two components. The control and variation of these two factors lead to the prediction of various complex binary ordered patterns, with different types of sublattice ordering for integer vs. noninteger ratios of sublattice length scales. These findings will enable further systematic studies of complex ordering and assembly processes of binary systems particularly binary colloidal crystals.
△ Less
Submitted 25 August, 2019;
originally announced August 2019.
-
Phase field crystal model for heterostructures
Authors:
Petri Hirvonen,
Vili Heinonen,
Haikuan Dong,
Zheyong Fan,
Ken R. Elder,
Tapio Ala-Nissila
Abstract:
Atomically thin 2-dimensional heterostructures are a promising, novel class of materials with groundbreaking properties. The possiblity of choosing the many constituent components and their proportions allows optimizing these materials to specific requirements. The wide adaptability comes with a cost of large parameter space making it hard to experimentally test all the possibilities. Instead, eff…
▽ More
Atomically thin 2-dimensional heterostructures are a promising, novel class of materials with groundbreaking properties. The possiblity of choosing the many constituent components and their proportions allows optimizing these materials to specific requirements. The wide adaptability comes with a cost of large parameter space making it hard to experimentally test all the possibilities. Instead, efficient computational modelling is needed. However, large range of relevant time and length scales related to physics of polycrystalline materials poses a challenge for computational studies. To this end, we present an efficient and flexible phase-field crystal model to describe the atomic configurations of multiple atomic species and phases coexisting in the same physical domain. We extensively benchmark the model for two-dimensional binary systems in terms of their elastic properties and phase boundary configurations and their energetics. As a concrete example, we demonstrate modelling lateral heterostructures of graphene and hexagonal boron nitride. We consider both idealized bicrystals and large-scale systems with random phase distributions. We find consistent relative elastic moduli and lattice constants, as well as realistic continuous interfaces and faceted crystal shapes. Zigzag-oriented interfaces are observed to display the lowest formation energy.
△ Less
Submitted 15 August, 2019;
originally announced August 2019.
-
Controlling grain boundaries by magnetic fields
Authors:
R. Backofen,
K. R. Elder,
A. Voigt
Abstract:
The ability to use external magnetic fields to influence the microstructure in polycrystalline materials has potential applications in microstructural engineering. To explore this potential and to understand the complex interactions between electromagnetic fields and solid-state matter transport we consider a phase-field-crystal (PFC) model. Together with efficient and scalable numerical algorithm…
▽ More
The ability to use external magnetic fields to influence the microstructure in polycrystalline materials has potential applications in microstructural engineering. To explore this potential and to understand the complex interactions between electromagnetic fields and solid-state matter transport we consider a phase-field-crystal (PFC) model. Together with efficient and scalable numerical algorithms this allows the examination of the role that external magnetic fields play on the evolution of defect structures and grain boundaries, on diffusive time scales. Examples for planar and circular grain boundaries explain the essential atomistic processes and large scale simulations in 2D are used to obtain statistical data on grain growth under the influence of external fields.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
Closing the gap between atomic-scale lattice deformations and continuum elasticity
Authors:
Marco Salvalaglio,
Axel Voigt,
Ken R. Elder
Abstract:
Crystal lattice deformations can be described microscopically by explicitly accounting for the position of atoms or macroscopically by continuum elasticity. In this work, we report on the description of continuous elastic fields derived from an atomistic representation of crystalline structures that also include features typical of the microscopic scale. Analytic expressions for strain components…
▽ More
Crystal lattice deformations can be described microscopically by explicitly accounting for the position of atoms or macroscopically by continuum elasticity. In this work, we report on the description of continuous elastic fields derived from an atomistic representation of crystalline structures that also include features typical of the microscopic scale. Analytic expressions for strain components are obtained from the complex amplitudes of the Fourier modes representing periodic lattice positions, which can be generally provided by atomistic modeling or experiments. The magnitude and phase of these amplitudes, together with the continuous description of strains, are able to characterize crystal rotations, lattice deformations, and dislocations. Moreover, combined with the so-called amplitude expansion of the phase-field crystal model, they provide a suitable tool for bridging microscopic to macroscopic scales. This study enables the in-depth analysis of elasticity effects for macro- and mesoscale systems taking microscopic details into account.
△ Less
Submitted 24 April, 2019; v1 submitted 15 August, 2018;
originally announced August 2018.
-
Grain extraction and microstructural analysis method for two-dimensional poly and quasicrystalline solids
Authors:
Petri Hirvonen,
Gabriel Martine La Boissonière,
Zheyong Fan,
Cristian-Vasile Achim,
Nikolas Provatas,
Ken R. Elder,
Tapio Ala-Nissila
Abstract:
While the microscopic structure of defected solid crystalline materials has significant impact on their physical properties, efficient and accurate determination of a given polycrystalline microstructure remains a challenge. In this paper we present a highly generalizable and reliable variational method to achieve this goal for two-dimensional crystalline and quasicrystalline materials. The method…
▽ More
While the microscopic structure of defected solid crystalline materials has significant impact on their physical properties, efficient and accurate determination of a given polycrystalline microstructure remains a challenge. In this paper we present a highly generalizable and reliable variational method to achieve this goal for two-dimensional crystalline and quasicrystalline materials. The method is benchmarked and optimized successfully using a variety of large-scale systems of defected solids, including periodic structures and quasicrystalline symmetries to quantify their microstructural characteristics, e.g., grain size and lattice misorientation distributions. We find that many microstructural properties show universal features independent of the underlying symmetries.
△ Less
Submitted 2 June, 2018;
originally announced June 2018.
-
Defects at grain boundaries: A coarse-grained, three-dimensional description by the amplitude expansion of the phase-field crystal model
Authors:
Marco Salvalaglio,
Rainer Backofen,
K. R. Elder,
Axel Voigt
Abstract:
We address a three-dimensional, coarse-grained description of dislocation networks at grain boundaries between rotated crystals. The so-called amplitude expansion of the phase-field crystal model is exploited with the aid of finite element method calculations. This approach allows for the description of microscopic features, such as dislocations, while simultaneously being able to describe length…
▽ More
We address a three-dimensional, coarse-grained description of dislocation networks at grain boundaries between rotated crystals. The so-called amplitude expansion of the phase-field crystal model is exploited with the aid of finite element method calculations. This approach allows for the description of microscopic features, such as dislocations, while simultaneously being able to describe length scales that are orders of magnitude larger than the lattice spacing. Moreover, it allows for the direct description of extended defects by means of a scalar order parameter. The versatility of this framework is shown by considering both fcc and bcc lattice symmetries and different rotation axes. First, the specific case of planar, twist grain boundaries is illustrated. The details of the method are reported and the consistency of the results with literature is discussed. Then, the dislocation networks forming at the interface between a spherical, rotated crystal embedded in an unrotated crystalline structure, are shown. Although explicitly accounting for dislocations which lead to an anisotropic shrinkage of the rotated grain, the extension of the spherical grain boundary is found to decrease linearly over time in agreement with the classical theory of grain growth and recent atomistic investigations. It is shown that the results obtained for a system with bcc symmetry agree very well with existing results, validating the methodology. Furthermore, fully original results are shown for fcc lattice symmetry, revealing the generality of the reported observations.
△ Less
Submitted 28 May, 2018; v1 submitted 8 March, 2018;
originally announced March 2018.
-
Parameter-free predictions of the viscoelastic response of glassy polymers from non-affine lattice dynamics
Authors:
Vladimir V. Palyulin,
Christopher Ness,
Rico Milkus,
Robert M. Elder,
Timothy W. Sirk,
Alessio Zaccone
Abstract:
We study the viscoelastic response of amorphous polymers using theory and simulations. By accounting for internal stresses and considering instantaneous normal modes (INMs) within athermal non-affine theory, we make parameter-free predictions of the dynamic viscoelastic moduli obtained in coarse-grained simulations of polymer glasses at non-zero temperatures. The theoretical results show very good…
▽ More
We study the viscoelastic response of amorphous polymers using theory and simulations. By accounting for internal stresses and considering instantaneous normal modes (INMs) within athermal non-affine theory, we make parameter-free predictions of the dynamic viscoelastic moduli obtained in coarse-grained simulations of polymer glasses at non-zero temperatures. The theoretical results show very good correspondence with rheology data collected from molecular dynamics simulations over five orders of magnitude in frequency, with some instabilities that accumulate in the low-frequency part on approach to the glass transition. These results provide evidence that the mechanical glass transition itself is continuous and thus represents a crossover rather than a true phase transition. The relatively sharp drop of the low-frequency storage modulus across the glass transition temperature can be explained mechanistically within the proposed theory: the proliferation of low-eigenfrequency vibrational excitations (boson peak and nearly-zero energy excitations) is directly responsible for the rapid growth of a negative non-affine contribution to the storage modulus.
△ Less
Submitted 5 September, 2018; v1 submitted 28 November, 2017;
originally announced November 2017.
-
Kapitza thermal resistance across individual grain boundaries in graphene
Authors:
Khatereh Azizi,
Petri Hirvonen,
Zheyong Fan,
Ari Harju,
Ken R Elder,
Tapio Ala-Nissila,
S Mehdi Vaez Allaei
Abstract:
We study heat transport across individual grain boundaries in suspended monolayer graphene using extensive classical molecular dynamics (MD) simulations. We construct bicrystalline graphene samples containing grain boundaries with symmetric tilt angles using the two-dimensional phase field crystal method and then relax the samples with MD. The corresponding Kapitza resistances are then computed us…
▽ More
We study heat transport across individual grain boundaries in suspended monolayer graphene using extensive classical molecular dynamics (MD) simulations. We construct bicrystalline graphene samples containing grain boundaries with symmetric tilt angles using the two-dimensional phase field crystal method and then relax the samples with MD. The corresponding Kapitza resistances are then computed using nonequilibrium MD simulations. We find that the Kapitza resistance depends strongly on the tilt angle and shows a clear correlation with the average density of defects in a given grain boundary, but is not strongly correlated with the grain boundary line tension. We also show that quantum effects are significant in quantitative determination of the Kapitza resistance by applying the mode-by-mode quantum correction to the classical MD data. The corrected data are in good agreement with quantum mechanical Landauer-Bütticker calculations.
△ Less
Submitted 27 September, 2017;
originally announced September 2017.
-
Nonmonotonic dependence of polymer glass mechanical response on chain bending stiffness
Authors:
Christopher Ness,
Vladimir V. Palyulin,
Rico Milkus,
Robert Elder,
Timothy Sirk,
Alessio Zaccone
Abstract:
We investigate the mechanical properties of amorphous polymers by means of coarse-grained simulations and nonaffine lattice dynamics theory. A small increase of polymer chain bending stiffness leads first to softening of the material, while hardening happens only upon further strengthening of the backbones. This nonmonotonic variation of the storage modulus $G'$ with bending stiffness is caused by…
▽ More
We investigate the mechanical properties of amorphous polymers by means of coarse-grained simulations and nonaffine lattice dynamics theory. A small increase of polymer chain bending stiffness leads first to softening of the material, while hardening happens only upon further strengthening of the backbones. This nonmonotonic variation of the storage modulus $G'$ with bending stiffness is caused by a competition between additional resistance to deformation offered by stiffer backbones and decreased density of the material due to a necessary decrease in monomer-monomer coordination. This counter-intuitive finding suggests that the strength of polymer glasses may in some circumstances be enhanced by softening the bending of constituent chains.
△ Less
Submitted 13 September, 2017; v1 submitted 31 August, 2017;
originally announced September 2017.
-
Grain Boundary Structures and Collective Dynamics of Inversion Domains in Binary Two-Dimensional Materials
Authors:
Doaa Taha,
S. K. Mkhonta,
K. R. Elder,
Zhi-Feng Huang
Abstract:
Understanding and controlling the properties and dynamics of topological defects is a lasting challenge in the study of two-dimensional materials, and is crucial to achieve high-quality films required for technological applications. Here grain boundary structures, energies, and dynamics of binary two-dimensional materials are investigated through the development of a phase field crystal model that…
▽ More
Understanding and controlling the properties and dynamics of topological defects is a lasting challenge in the study of two-dimensional materials, and is crucial to achieve high-quality films required for technological applications. Here grain boundary structures, energies, and dynamics of binary two-dimensional materials are investigated through the development of a phase field crystal model that is parameterized to match the ordering, symmetry, energy and length scales of hexagonal boron nitride. Our studies reveal some new dislocation core structures for various symmetrically and asymmetrically tilted grain boundaries, in addition to those obtained in previous experiments and first-principles calculations. We also identify a defect-mediated growth dynamics for inversion domains governed by the collective atomic migration and defect core transformation at grain boundaries and junctions, a process that is related to inversion symmetry breaking in binary lattice.
△ Less
Submitted 22 May, 2017;
originally announced May 2017.
-
Controlling the energy of defects and interfaces in the amplitude expansion of the phase-field crystal model
Authors:
Marco Salvalaglio,
Rainer Backofen,
Axel Voigt,
Ken R. Elder
Abstract:
One of the major difficulties in employing phase field crystal (PFC) modeling and the associated amplitude (APFC) formulation is the ability to tune model parameters to match experimental quantities. In this work we address the problem of tuning the defect core and interface energies in the APFC formulation. We show that the addition of a single term to the free energy functional can be used to in…
▽ More
One of the major difficulties in employing phase field crystal (PFC) modeling and the associated amplitude (APFC) formulation is the ability to tune model parameters to match experimental quantities. In this work we address the problem of tuning the defect core and interface energies in the APFC formulation. We show that the addition of a single term to the free energy functional can be used to increase the solid-liquid interface and defect energies in a well-controlled fashion, without any major change to other features. The influence of the newly added term is explored in two-dimensional triangular and honeycomb structures as well as bcc and fcc lattices in three dimensions. In addition, a finite element method (FEM) is developed for the model that incorporates a mesh refinement scheme. The combination of the FEM and mesh refinement to simulate amplitude expansion with a new energy term provides a method of controlling microscopic features such as defect and interface energies while simultaneously delivering a coarse-grained examination of the system.
△ Less
Submitted 26 July, 2017; v1 submitted 25 April, 2017;
originally announced April 2017.
-
Thermal conductivity decomposition in two-dimensional materials: Application to graphene
Authors:
Zheyong Fan,
Luiz Felipe C. Pereira,
Petri Hirvonen,
Mikko M. Ervasti,
Ken R. Elder,
Davide Donadio,
Tapio Ala-Nissila,
Ari Harju
Abstract:
Two-dimensional materials have unusual phonon structures due to the presence of flexural (out-of-plane) modes. Although molecular dynamics simulations have been extensively used to study heat transport in such materials, conventional formalisms treat the phonon dynamics isotropically. Here, we decompose the microscopic heat current in atomistic simulations into in-plane and out-of-plane components…
▽ More
Two-dimensional materials have unusual phonon structures due to the presence of flexural (out-of-plane) modes. Although molecular dynamics simulations have been extensively used to study heat transport in such materials, conventional formalisms treat the phonon dynamics isotropically. Here, we decompose the microscopic heat current in atomistic simulations into in-plane and out-of-plane components, corresponding to the in-plane and out-of-plane phonon dynamics, respectively. This decomposition allows for direct computation of the corresponding thermal conductivity components in two-dimensional materials. We apply this decomposition to study heat transport in suspended graphene, using both equilibrium and non-equilibrium molecular dynamics simulations. We show that the flexural component is responsible for about two thirds of the total thermal conductivity in unstrained graphene, and the acoustic flexural component is responsible for the logarithmic divergence of the conductivity when a sufficiently large tensile strain is applied.
△ Less
Submitted 25 June, 2017; v1 submitted 21 December, 2016;
originally announced December 2016.
-
Mass transport of adsorbates near a discontinuous structural phase transition
Authors:
E. Granato,
S. C. Ying,
K. R. Elder,
T. Ala-Nissila
Abstract:
We study the mass transport dynamics of an adsorbed layer near a discontinuous incommensurate striped-honeycomb phase transition via numerical simulations of a coarse-grained model focusing on the motion of domain walls rather than individual atoms. Following an initial step profile created in the incommensurate striped phase, an intermediate hexagonal incommensurate phase nucleates and grows, lea…
▽ More
We study the mass transport dynamics of an adsorbed layer near a discontinuous incommensurate striped-honeycomb phase transition via numerical simulations of a coarse-grained model focusing on the motion of domain walls rather than individual atoms. Following an initial step profile created in the incommensurate striped phase, an intermediate hexagonal incommensurate phase nucleates and grows, leading to a bifurcation into two sharp profiles propagating in opposite directions as opposed to broad profiles induced by atomic diffusive motion. Our results are in agreement with recent numerical simulations of a microscopic model as well as experimental observations for the Pb/Si(111) adsorbate system.
△ Less
Submitted 6 December, 2016;
originally announced December 2016.
-
Phase-field crystal model for ordered crystals
Authors:
Eli Alster,
K. R. Elder,
Jeffrey J. Hoyt,
Peter W. Voorhees
Abstract:
We describe a general method to model multicomponent ordered crystals using the phase-field crystal (PFC) formalism. As a test case, a generic B2 compound is investigated. We are able to produce a line of either first-order or second-order order-disorder phase transitions, features that have not been incorporated in existing PFC approaches. Further, it is found that the only elastic constant for B…
▽ More
We describe a general method to model multicomponent ordered crystals using the phase-field crystal (PFC) formalism. As a test case, a generic B2 compound is investigated. We are able to produce a line of either first-order or second-order order-disorder phase transitions, features that have not been incorporated in existing PFC approaches. Further, it is found that the only elastic constant for B2 that depends on ordering is $C_{11}$. This B2 model was then used to study antiphase boundaries (APBs). The APBs were shown to reproduce classical mean field results. Dynamical simulations of ordering across small-angle grain boundaries predict that dislocation cores pin the evolution of APBs.
△ Less
Submitted 20 October, 2016;
originally announced October 2016.
-
Multiscale modeling of polycrystalline graphene: A comparison of structure and defect energies of realistic samples from phase field crystal models
Authors:
Petri Hirvonen,
Mikko M. Ervasti,
Zheyong Fan,
Morteza Jalalvand,
Matthew Seymour,
S. Mehdi Vaez Allaei,
Nikolas Provatas,
Ari Harju,
Ken R. Elder,
Tapio Ala-Nissila
Abstract:
We extend the phase field crystal (PFC) framework to quantitative modeling of polycrystalline graphene. PFC modeling is a powerful multiscale method for finding the ground state configurations of large realistic samples that can be further used to study their mechanical, thermal or electronic properties. By fitting to quantum-mechanical density functional theory (DFT) calculations, we show that th…
▽ More
We extend the phase field crystal (PFC) framework to quantitative modeling of polycrystalline graphene. PFC modeling is a powerful multiscale method for finding the ground state configurations of large realistic samples that can be further used to study their mechanical, thermal or electronic properties. By fitting to quantum-mechanical density functional theory (DFT) calculations, we show that the PFC approach is able to predict realistic formation energies and defect structures of grain boundaries. We provide an in-depth comparison of the formation energies between PFC, DFT and molecular dynamics (MD) calculations. The DFT and MD calculations are initialized using atomic configurations extracted from PFC ground states. Finally, we use the PFC approach to explicitly construct large realistic polycrystalline samples and characterize their properties using MD relaxation to demonstrate their quality.
△ Less
Submitted 22 June, 2016; v1 submitted 12 May, 2016;
originally announced May 2016.
-
Phase-field-crystal models and mechanical equilibrium
Authors:
V. Heinonen,
C. V. Achim,
K. R. Elder,
S. Buyukdagli,
T. Ala-Nissila
Abstract:
Phase field crystal (PFC) models constitute a field theoretical approach to solidification, melting and related phenomena at atomic length and diffusive time scales. One of the advantages of these models is that they naturally contain elastic excitations associated with strain in crystalline bodies. However, instabilities that are diffusively driven towards equilibrium are often orders of magnitud…
▽ More
Phase field crystal (PFC) models constitute a field theoretical approach to solidification, melting and related phenomena at atomic length and diffusive time scales. One of the advantages of these models is that they naturally contain elastic excitations associated with strain in crystalline bodies. However, instabilities that are diffusively driven towards equilibrium are often orders of magnitude slower than the dynamics of the elastic excitations, and are thus not included in the standard PFC model dynamics. We derive a method to isolate the time evolution of the elastic excitations from the diffusive dynamics in the PFC approach and set up a two-stage process, in which elastic excitations are equilibrated separately. This ensures mechanical equilibrium at all times. We show concrete examples demonstrating the necessity of the separation of the elastic and diffusive time scales. In the small deformation limit this approach is shown to agree with the theory of linear elasticity.
△ Less
Submitted 28 November, 2013;
originally announced November 2013.
-
Phase Field Crystal Model for Magneto-Elasticity in Isotropic Ferromagnetic Solids
Authors:
Niloufar Faghihi,
Nikolas Provatas,
K. R. Elder,
Martin Grant,
Mikko Karttunen
Abstract:
A new isotropic magneto-elastic phase field crystal (PFC) model to study the relation between morphological structure and magnetic properties of pure ferromagnetic solids is introduced. Analytic calculations were used to determine the phase diagram and obtain the relationship between elastic strains and magnetization. Time dependent numerical simulations were used to demonstrate the effect of grai…
▽ More
A new isotropic magneto-elastic phase field crystal (PFC) model to study the relation between morphological structure and magnetic properties of pure ferromagnetic solids is introduced. Analytic calculations were used to determine the phase diagram and obtain the relationship between elastic strains and magnetization. Time dependent numerical simulations were used to demonstrate the effect of grain boundaries on the formation of magnetic domains. It was shown that the grain boundaries act as nucleating sites for domains of reverse magnetization. Finally, we derive a relation for coercivity versus grain mis-orientation in the isotropic limit.
△ Less
Submitted 2 July, 2013;
originally announced July 2013.
-
Glassy phases and driven response of the phase-field-crystal model with random pinning
Authors:
E. Granato,
J. A. P. Ramos,
C. V. Achim,
J. Lehikoinen,
S. C. Ying,
T. Ala-Nissila,
K. R. Elder
Abstract:
We study the structural correlations and the nonlinear response to a driving force of a two-dimensional phase-field-crystal model with random pinning. The model provides an effective continuous description of lattice systems in the presence of disordered external pinning centers, allowing for both elastic and plastic deformations. We find that the phase-field crystal with disorder assumes an amorp…
▽ More
We study the structural correlations and the nonlinear response to a driving force of a two-dimensional phase-field-crystal model with random pinning. The model provides an effective continuous description of lattice systems in the presence of disordered external pinning centers, allowing for both elastic and plastic deformations. We find that the phase-field crystal with disorder assumes an amorphous glassy ground state, with only short-ranged positional and orientational correlations even in the limit of weak disorder. Under increasing driving force, the pinned amorphous-glass phase evolves into a moving plastic-flow phase and then finally a moving smectic phase. The transverse response of the moving smectic phase shows a vanishing transverse critical force for increasing system sizes.
△ Less
Submitted 1 September, 2011;
originally announced September 2011.
-
Phase Field Crystal Study of Symmetric Tilt Grain Boundaries of Iron
Authors:
A. Jaatinen,
C. V. Achim,
K. R. Elder,
T. Ala-Nissila
Abstract:
We apply the phase field crystal model to study the structure and energy of symmetric tilt grain boundaries of bcc iron in 3D. The parameters for the model are obtained by using a recently developed eight-order fitting scheme [A. Jaatinen et al., Phys. Rev. B 80, 031602 (2009)]. The grain boundary free energies we obtain from the model are in good agreement with previous results from molecular dyn…
▽ More
We apply the phase field crystal model to study the structure and energy of symmetric tilt grain boundaries of bcc iron in 3D. The parameters for the model are obtained by using a recently developed eight-order fitting scheme [A. Jaatinen et al., Phys. Rev. B 80, 031602 (2009)]. The grain boundary free energies we obtain from the model are in good agreement with previous results from molecular dynamics simulations and experiments.
△ Less
Submitted 21 June, 2010;
originally announced June 2010.
-
Phase field crystal dynamics for binary systems: Derivation from dynamical density functional theory, amplitude equation formalism, and applications to alloy heterostructures
Authors:
Zhi-Feng Huang,
K. R. Elder,
Nikolas Provatas
Abstract:
The dynamics of phase field crystal (PFC) modeling is derived from dynamical density functional theory (DDFT), for both single-component and binary systems. The derivation is based on a truncation up to the three-point direct correlation functions in DDFT, and the lowest order approximation using scale analysis. The complete amplitude equation formalism for binary PFC is developed to describe the…
▽ More
The dynamics of phase field crystal (PFC) modeling is derived from dynamical density functional theory (DDFT), for both single-component and binary systems. The derivation is based on a truncation up to the three-point direct correlation functions in DDFT, and the lowest order approximation using scale analysis. The complete amplitude equation formalism for binary PFC is developed to describe the coupled dynamics of slowly varying complex amplitudes of structural profile, zeroth-mode average atomic density, and system concentration field. Effects of noise (corresponding to stochastic amplitude equations) and species-dependent atomic mobilities are also incorporated in this formalism. Results of a sample application to the study of surface segregation and interface intermixing in alloy heterostructures and strained layer growth are presented, showing the effects of different atomic sizes and mobilities of alloy components. A phenomenon of composition overshooting at the interface is found, which can be connected to the surface segregation and enrichment of one of the atomic components observed in recent experiments of alloying heterostructures.
△ Less
Submitted 7 June, 2010;
originally announced June 2010.
-
Dynamical transitions and sliding friction of the phase-field-crystal model with pinning
Authors:
J. A. P. Ramos,
E. Granato,
S. C. Ying,
C. V. Achim,
K. R. Elder,
T. Ala-Nissila
Abstract:
We study the nonlinear driven response and sliding friction behavior of the phase-field-crystal (PFC) model with pinning including both thermal fluctuations and inertial effects. The model provides a continuous description of adsorbed layers on a substrate under the action of an external driving force at finite temperatures, allowing for both elastic and plastic deformations. We derive general s…
▽ More
We study the nonlinear driven response and sliding friction behavior of the phase-field-crystal (PFC) model with pinning including both thermal fluctuations and inertial effects. The model provides a continuous description of adsorbed layers on a substrate under the action of an external driving force at finite temperatures, allowing for both elastic and plastic deformations. We derive general stochastic dynamical equations for the particle and momentum densities including both thermal fluctuations and inertial effects. The resulting coupled equations for the PFC model are studied numerically. At sufficiently low temperatures we find that the velocity response of an initially pinned commensurate layer shows hysteresis with dynamical melting and freezing transitions for increasing and decreasing applied forces at different critical values. The main features of the nonlinear response in the PFC model are similar to the results obtained previously with molecular dynamics simulations of particle models for adsorbed layers.
△ Less
Submitted 8 January, 2010;
originally announced January 2010.
-
Amplitude expansion of the binary phase field crystal model
Authors:
K. R. Elder,
Zhi-Feng Huang,
Nikolas Provatas
Abstract:
Amplitude representations of a binary phase field crystal model are developed for a two dimensional triangular lattice and three dimensional BCC and FCC crystal structures. The relationship between these amplitude equations and the standard phase field models for binary alloy solidification with elasticity are derived, providing an explicit connection between phase field crystal and phase field…
▽ More
Amplitude representations of a binary phase field crystal model are developed for a two dimensional triangular lattice and three dimensional BCC and FCC crystal structures. The relationship between these amplitude equations and the standard phase field models for binary alloy solidification with elasticity are derived, providing an explicit connection between phase field crystal and phase field models. Sample simulations of solute migration at grain boundaries, eutectic solidification and quantum dot formation on nano-membranes are also presented.
△ Less
Submitted 5 October, 2009;
originally announced October 2009.
-
Nonlinear Driven Response of a Phase-Field Crystal in a Periodic Pinning Potential
Authors:
C. V. Achim,
J. A. P. Ramos,
M. Karttunen,
K. R. Elder,
E. Granato,
T. Ala-Nissila,
S. C. Ying
Abstract:
We study numerically the phase diagram and the response under a driving force of the phase field crystal model for pinned lattice systems introduced recently for both one and two dimensional systems. The model describes the lattice system as a continuous density field in the presence of a periodic pinning potential, allowing for both elastic and plastic deformations of the lattice. We first pres…
▽ More
We study numerically the phase diagram and the response under a driving force of the phase field crystal model for pinned lattice systems introduced recently for both one and two dimensional systems. The model describes the lattice system as a continuous density field in the presence of a periodic pinning potential, allowing for both elastic and plastic deformations of the lattice. We first present results for phase diagrams of the model in the absence of a driving force. The nonlinear response to a driving force on an initially pinned commensurate phase is then studied via overdamped dynamic equations of motion for different values of mismatch and pinning strengths. For large pinning strength the driven depinning transitions are continuous, and the sliding velocity varies with the force from the threshold with power-law exponents in agreement with analytical predictions. Transverse depinning transitions in the moving state are also found in two dimensions. Surprisingly, for sufficiently weak pinning potential we find a discontinuous depinning transition with hysteresis even in one dimension under overdamped dynamics. We also characterize structural changes of the system in some detail close to the depinning transition.
△ Less
Submitted 12 February, 2009;
originally announced February 2009.
-
Thermal fluctuations and phase diagrams of the phase field crystal model with pinning
Authors:
J. A. P. Ramos,
E. Granato,
C. V. Achim,
S. C. Ying,
K. R. Elder,
T. Ala-Nissila
Abstract:
We study the influence of thermal fluctuations in the phase diagram of a recently introduced two-dimensional phase field crystal model with an external pinning potential. The model provides a continuum description of pinned lattice systems allowing for both elastic deformations and topological defects. We introduce a non-conserved version of the model and determine the ground-state phase diagram…
▽ More
We study the influence of thermal fluctuations in the phase diagram of a recently introduced two-dimensional phase field crystal model with an external pinning potential. The model provides a continuum description of pinned lattice systems allowing for both elastic deformations and topological defects. We introduce a non-conserved version of the model and determine the ground-state phase diagram as a function of lattice mismatch and strength of the pinning potential. Monte Carlo simulations are used to determine the phase diagram as a function of temperature near commensurate phases. The results show a rich phase diagram with commensurate, incommensurate and liquid-like phases with a topology strongly dependent on the type of ordered structure. A finite-size scaling analysis of the melting transition for the $c(2 \times 2)$ commensurate phase shows that the thermal correlation length exponent $ν$ and specific heat behavior are consistent with the Ising universality class as expected from analytical arguments.
△ Less
Submitted 23 August, 2008;
originally announced August 2008.
-
Soft Elasticity in Nematic Liquid-Crystal Networks
Authors:
Simiso K. Mkhonta,
Dan Vernon,
K. R. Elder,
Martin Grant
Abstract:
Liquid-crystal networks consist of weakly crosslinked polymers that are coupled to liquid-crystal molecules. The resultant hybrid system has rich elastic properties. We develop a phase field model to describe mechanical properties of a hexagonal liquid-crystal network. The hexagonal liquid-crystal network is found to have soft shear deformations. The elastic properties are predicted analytically…
▽ More
Liquid-crystal networks consist of weakly crosslinked polymers that are coupled to liquid-crystal molecules. The resultant hybrid system has rich elastic properties. We develop a phase field model to describe mechanical properties of a hexagonal liquid-crystal network. The hexagonal liquid-crystal network is found to have soft shear deformations. The elastic properties are predicted analytically and confirmed with numerical simulations. In addition the model incorporates non-linear elasticity and dislocations or disclinations.
△ Less
Submitted 9 October, 2008; v1 submitted 20 June, 2008;
originally announced June 2008.
-
Melting at dislocations and grain boundaries: A Phase Field Crystal study
Authors:
Joel Berry,
K. R. Elder,
Martin Grant
Abstract:
Dislocation and grain boundary melting are studied in three dimensions using the Phase Field Crystal method. Isolated dislocations are found to melt radially outward from their core, as the localized excess elastic energy drives a power law divergence in the melt radius. Dislocations within low-to-mid angle grain boundaries melt similarly until an angle-dependent first order wetting transition o…
▽ More
Dislocation and grain boundary melting are studied in three dimensions using the Phase Field Crystal method. Isolated dislocations are found to melt radially outward from their core, as the localized excess elastic energy drives a power law divergence in the melt radius. Dislocations within low-to-mid angle grain boundaries melt similarly until an angle-dependent first order wetting transition occurs when neighboring melted regions coalesce. High angle boundaries are treated within a screening approximation, and issues related to ensembles, metastability, and grain size are discussed.
△ Less
Submitted 4 January, 2008;
originally announced January 2008.
-
Phase Diagram and Commensurate-Incommensurate Transitions in the Phase Field Crystal Model with an External Pinning Potential
Authors:
C. V. Achim,
M. Karttunen,
K. R. Elder,
E. Granato,
T. Ala-Nissila,
S. C. Ying
Abstract:
We study the phase diagram and the commensurate-incommensurate transitions in a phase field model of a two-dimensional crystal lattice in the presence of an external pinning potential. The model allows for both elastic and plastic deformations and provides a continuum description of lattice systems, such as for adsorbed atomic layers or two-dimensional vortex lattices. Analytically, a mode expan…
▽ More
We study the phase diagram and the commensurate-incommensurate transitions in a phase field model of a two-dimensional crystal lattice in the presence of an external pinning potential. The model allows for both elastic and plastic deformations and provides a continuum description of lattice systems, such as for adsorbed atomic layers or two-dimensional vortex lattices. Analytically, a mode expansion analysis is used to determine the ground states and the commensurate-incommensurate transitions in the model as a function of the strength of the pinning potential and the lattice mismatch parameter. Numerical minimization of the corresponding free energy shows good agreement with the analytical predictions and provides details on the topological defects in the transition region. We find that for small mismatch the transition is of first-order, and it remains so for the largest values of mismatch studied here. Our results are consistent with results of simulations for atomistic models of adsorbed overlayers.
△ Less
Submitted 8 August, 2006;
originally announced August 2006.
-
Density Functional Theory of Freezing and Phase Field Crystal Modeling
Authors:
K. R. Elder,
Nikolas Provatas,
Joel Berry,
Peter Stefanovic,
Martin Grant
Abstract:
In this paper the relationship between the density functional theory of freezing and phase field modeling is examined. More specifically a connection is made between the correlation functions that enter density functional theory and the free energy functionals used in phase field crystal modeling and standard models of binary alloys (i.e., regular solution model). To demonstrate the properties o…
▽ More
In this paper the relationship between the density functional theory of freezing and phase field modeling is examined. More specifically a connection is made between the correlation functions that enter density functional theory and the free energy functionals used in phase field crystal modeling and standard models of binary alloys (i.e., regular solution model). To demonstrate the properties of the phase field crystal formalism a simple model of binary alloy crystallization is derived and shown to simultaneously model solidification, phase segregation, grain growth, elastic and plastic deformations in anisotropic systems with multiple crystal orientations on diffusive time scales.
△ Less
Submitted 17 July, 2006;
originally announced July 2006.
-
Diffusive Atomistic Dynamics of Edge Dislocations in Two Dimensions
Authors:
J. Berry,
K. R. Elder,
M. Grant
Abstract:
The fundamental dislocation processes of glide, climb, and annihilation are studied on diffusive time scales within the framework of a continuum field theory, the Phase Field Crystals (PFC) model. Glide and climb are examined for single edge dislocations subjected to shear and compressive strain, respectively, in a two dimensional hexagonal lattice. It is shown that the natural features of these…
▽ More
The fundamental dislocation processes of glide, climb, and annihilation are studied on diffusive time scales within the framework of a continuum field theory, the Phase Field Crystals (PFC) model. Glide and climb are examined for single edge dislocations subjected to shear and compressive strain, respectively, in a two dimensional hexagonal lattice. It is shown that the natural features of these processes are reproduced without any explicit consideration of elasticity theory or ad hoc construction of microscopic Peierls potentials. Particular attention is paid to the Peierls barrier for dislocation glide/climb and the ensuing dynamic behavior as functions of strain rate, temperature, and dislocation density. It is shown that the dynamics are accurately described by simple viscous motion equations for an overdamped point mass, where the dislocation mobility is the only adjustable parameter. The critical distance for the annihilation of two edge dislocations as a function of separation angle is also presented.
△ Less
Submitted 27 October, 2005;
originally announced October 2005.
-
Modeling Elastic and Plastic Deformations in Non-Equilibrium Processing Using Phase Field Crystals
Authors:
K. R. Elder,
Martin Grant
Abstract:
A continuum field theory approach is presented for modeling elastic and plastic deformation, free surfaces and multiple crystal orientations in non-equilibrium processing phenomena. Many basic properties of the model are calculated analytically and numerical simulations are presented for a number of important applications including, epitaxial growth, material hardness, grain growth, reconstructi…
▽ More
A continuum field theory approach is presented for modeling elastic and plastic deformation, free surfaces and multiple crystal orientations in non-equilibrium processing phenomena. Many basic properties of the model are calculated analytically and numerical simulations are presented for a number of important applications including, epitaxial growth, material hardness, grain growth, reconstructive phase transitions and crack propagation.
△ Less
Submitted 26 June, 2003;
originally announced June 2003.
-
Instabilities and resistance fluctuations in thin accelerated superconducting rings
Authors:
Mikko Karttunen,
K. R. Elder,
Martin B. Tarlie,
Martin Grant
Abstract:
The non-equilibrium properties of a driven quasi-one dimensional superconducting ring subjected to a constant electromotive force ({\it emf}) is studied. The {\it emf} accelerates the superconducting electrons until the critical current is reached and a dissipative phase slip occurs that lowers the current. The phase slip phenomena is examined as a function of the strength of the {\it emf}, ther…
▽ More
The non-equilibrium properties of a driven quasi-one dimensional superconducting ring subjected to a constant electromotive force ({\it emf}) is studied. The {\it emf} accelerates the superconducting electrons until the critical current is reached and a dissipative phase slip occurs that lowers the current. The phase slip phenomena is examined as a function of the strength of the {\it emf}, thermal noise, and normal state resistivity. Numerical and analytic methods are used to make detailed predictions for the magnitude of phase slips and subsequent dissipation.
△ Less
Submitted 14 November, 2002; v1 submitted 14 November, 2002;
originally announced November 2002.
-
Modeling Elasticity in Crystal Growth
Authors:
K. R. Elder,
Mark Katakowski,
Mikko Haataja,
Martin Grant
Abstract:
A new model of crystal growth is presented that describes the phenomena on atomic length and diffusive time scales. The former incorporates elastic and plastic deformation in a natural manner, and the latter enables access to times scales much larger than conventional atomic methods. The model is shown to be consistent with the predictions of Read and Shockley for grain boundary energy, and Matt…
▽ More
A new model of crystal growth is presented that describes the phenomena on atomic length and diffusive time scales. The former incorporates elastic and plastic deformation in a natural manner, and the latter enables access to times scales much larger than conventional atomic methods. The model is shown to be consistent with the predictions of Read and Shockley for grain boundary energy, and Matthews and Blakeslee for misfit dislocations in epitaxial growth.
△ Less
Submitted 18 July, 2001;
originally announced July 2001.
-
Comment on: `Pipe Network Model for Scaling of Dynamic Interfaces in Porous Media'
Authors:
M. Dube,
M. Rost,
K. R. Elder,
M. Alava,
S. Majaniemi,
T. Ala-Nissila
Abstract:
We argue that a proposed exponent identity [Phys. Rev. Lett 85, 1238 (2000)] for interface roughening in spontaneous imbibition is wrong. It rests on the assumption that the fluctuations are controlled by a single time scale, but liquid conservation imposes two distinct time scales.
We argue that a proposed exponent identity [Phys. Rev. Lett 85, 1238 (2000)] for interface roughening in spontaneous imbibition is wrong. It rests on the assumption that the fluctuations are controlled by a single time scale, but liquid conservation imposes two distinct time scales.
△ Less
Submitted 28 April, 2001;
originally announced April 2001.
-
Sharp interface limits of phase-field models
Authors:
K. R. Elder,
Martin Grant,
Nikolas Provatas,
J. M. Kosterlitz
Abstract:
The use of continuum phase-field models to describe the motion of well-defined interfaces is discussed for a class of phenomena, that includes order/disorder transitions, spinodal decomposition and Ostwald ripening, dendritic growth, and the solidification of eutectic alloys. The projection operator method is used to extract the ``sharp interface limit'' from phase field models which have interf…
▽ More
The use of continuum phase-field models to describe the motion of well-defined interfaces is discussed for a class of phenomena, that includes order/disorder transitions, spinodal decomposition and Ostwald ripening, dendritic growth, and the solidification of eutectic alloys. The projection operator method is used to extract the ``sharp interface limit'' from phase field models which have interfaces that are diffuse on a length scale $ξ$. In particular,phase-field equations are mapped onto sharp interface equations in the limits $ξκ\ll 1$ and $ξv/D \ll 1$, where $κ$ and $v$ are respectively the interface curvature and velocity and $D$ is the diffusion constant in the bulk. The calculations provide one general set of sharp interface equations that incorporate the Gibbs-Thomson condition, the Allen-Cahn equation and the Kardar-Parisi-Zhang equation.
△ Less
Submitted 1 November, 2000;
originally announced November 2000.
-
Conserved Dynamics and Interface Roughening in Spontaneous Imbibition : A Phase Field Model
Authors:
M. Dube,
M. Rost,
K. R. Elder,
M. Alava,
S. Majaniemi,
T. Ala-Nissila
Abstract:
The propagation and roughening of a fluid-gas interface through a disordered medium in the case of capillary driven spontaneous imbibition is considered. The system is described by a conserved (model B) phase-field model, with the structure of the disordered medium appearing as a quenched random field $α({\bf x})$. The flow of liquid into the medium is obtained by imposing a non-equilibrium boun…
▽ More
The propagation and roughening of a fluid-gas interface through a disordered medium in the case of capillary driven spontaneous imbibition is considered. The system is described by a conserved (model B) phase-field model, with the structure of the disordered medium appearing as a quenched random field $α({\bf x})$. The flow of liquid into the medium is obtained by imposing a non-equilibrium boundary condition on the chemical potential, which reproduces Washburn's equation $H \sim t^{1/2}$ for the slowing down motion of the average interface position $H$. The interface is found to be superrough, with global roughness exponent $χ\approx 1.25$, indicating anomalous scaling. The spatial extent of the roughness is determined by a length scale $ξ_{\times} \sim H^{1/2}$ arising from the conservation law. The interface advances by avalanche motion, which causes temporal multiscaling and qualitatively reproduces the experimental results of Horv\a'ath and Stanley [Phys. Rev. E {\bf 52} 5166 (1995)] on the temporal scaling of the interface.
△ Less
Submitted 30 August, 2000;
originally announced August 2000.
-
Defects, order, and hysteresis in driven charge-density waves
Authors:
Mikko Karttunen,
Mikko Haataja,
K. R. Elder,
Martin Grant
Abstract:
We model driven two-dimensional charge-density waves in random media via a modified Swift-Hohenberg equation, which includes both amplitude and phase fluctuations of the condensate. As the driving force is increased, we find that the defect density first increases and then decreases. Furthermore, we find switching phenomena, due to the formation of channels of dislocations. These results are in…
▽ More
We model driven two-dimensional charge-density waves in random media via a modified Swift-Hohenberg equation, which includes both amplitude and phase fluctuations of the condensate. As the driving force is increased, we find that the defect density first increases and then decreases. Furthermore, we find switching phenomena, due to the formation of channels of dislocations. These results are in qualitative accord with recent dynamical x-ray scattering experiments by Ringlandet al. and transport experiments by Lemay et al.
△ Less
Submitted 20 October, 1999;
originally announced October 1999.
-
An X-ray Scattering and Simulation Study of the Ordering Kinetics in CuAu
Authors:
K. R. Elder,
Oana Malis,
Karl Ludwig,
Bulbul Chakraborty,
Nigel Goldenfeld
Abstract:
A detailed numerical and experimental study of the ordering of the low temperature tetragonal phase of CuAu is presented. The numerical simulations are based on a coarse-grained free energy derived from electronic structure calculations of CuAu, while the experimental results are obtained from in situ x-ray scattering. Both theoretical and experimental work indicate a subtle kinetic competition…
▽ More
A detailed numerical and experimental study of the ordering of the low temperature tetragonal phase of CuAu is presented. The numerical simulations are based on a coarse-grained free energy derived from electronic structure calculations of CuAu, while the experimental results are obtained from in situ x-ray scattering. Both theoretical and experimental work indicate a subtle kinetic competition between the ordered tetragonal phase and the metastable modulated phase.
△ Less
Submitted 10 June, 1998;
originally announced June 1998.
-
Kinetics of Modulated and Ordered Structures in CuAu
Authors:
K. R. Elder,
Nicholas A. Gross,
Bulbul Chakraborty,
Nigel Goldenfeld
Abstract:
A continuum model derived from an atomistic Hamiltonian is used to examine the ordering kinetics in CuAu. A detailed description of the formation of the low and high temperature ordered and modulated superlattice states is given. The metastability of the modulated phase at low temperatures is shown to severely hinder creation of the ordered superlattice. Formation of the modulated superlattice i…
▽ More
A continuum model derived from an atomistic Hamiltonian is used to examine the ordering kinetics in CuAu. A detailed description of the formation of the low and high temperature ordered and modulated superlattice states is given. The metastability of the modulated phase at low temperatures is shown to severely hinder creation of the ordered superlattice. Formation of the modulated superlattice is shown to results in interesting lamellar and labyrinthine structures.
△ Less
Submitted 11 December, 1996;
originally announced December 1996.
-
Scaling, Propagation, and Kinetic Roughening of Flame Fronts in Random Media
Authors:
N. Provatas,
T. Ala-Nissila,
M. Grant,
K. R. Elder,
L. Piché
Abstract:
We introduce a model of two coupled reaction-diffusion equations to describe the dynamics and propagation of flame fronts in random media. The model incorporates heat diffusion, its dissipation, and its production through coupling to the background reactant density. We first show analytically and numerically that there is a finite critical value of the background density, below which the front a…
▽ More
We introduce a model of two coupled reaction-diffusion equations to describe the dynamics and propagation of flame fronts in random media. The model incorporates heat diffusion, its dissipation, and its production through coupling to the background reactant density. We first show analytically and numerically that there is a finite critical value of the background density, below which the front associated with the temperature field stops propagating. The critical exponents associated with this transition are shown to be consistent with mean field theory of percolation. Second, we study the kinetic roughening associated with a moving planar flame front above the critical density. By numerically calculating the time dependent width and equal time height correlation function of the front, we demonstrate that the roughening process belongs to the universality class of the Kardar-Parisi-Zhang interface equation. Finally, we show how this interface equation can be analytically derived from our model in the limit of almost uniform background density.
△ Less
Submitted 5 June, 1995;
originally announced June 1995.
-
Flame propagation in random media
Authors:
N. Provatas,
T. Ala-Nissila,
Martin Grant,
K. R. Elder,
Luc Pich
Abstract:
We introduce a phase-field model to describe the dynamics of a self-sustaining propagating combustion front within a medium of randomly distributed reactants. Numerical simulations of this model show that a flame front exists for reactant concentration $c > c^* > 0$, while its vanishing at $c^*$ is consistent with mean-field percolation theory. For $c > c^*$, we find that the interface associate…
▽ More
We introduce a phase-field model to describe the dynamics of a self-sustaining propagating combustion front within a medium of randomly distributed reactants. Numerical simulations of this model show that a flame front exists for reactant concentration $c > c^* > 0$, while its vanishing at $c^*$ is consistent with mean-field percolation theory. For $c > c^*$, we find that the interface associated with the diffuse combustion zone exhibits kinetic roughening characteristic of the Kardar-Parisi-Zhang equation.
△ Less
Submitted 13 May, 1994;
originally announced May 1994.
-
Dynamic scaling and quasi-ordered states in the two dimensional Swift-Hohenberg equation
Authors:
K. R. Elder,
Jorge Viñals,
Martin Grant
Abstract:
The process of pattern formation in the two dimensional Swift-Hohenberg equation is examined through numerical and analytic methods. Dynamic scaling relationships are developed for the collective ordering of convective rolls in the limit of infinite aspect ratio. The stationary solutions are shown to be strongly influenced by the strength of noise. Stationary states for small and large noise str…
▽ More
The process of pattern formation in the two dimensional Swift-Hohenberg equation is examined through numerical and analytic methods. Dynamic scaling relationships are developed for the collective ordering of convective rolls in the limit of infinite aspect ratio. The stationary solutions are shown to be strongly influenced by the strength of noise. Stationary states for small and large noise strengths appear to be quasi-ordered and disordered respectively. The dynamics of ordering from an initially inhomogeneous state is very slow in the former case and fast in the latter. Both numerical and analytic calculations indicate that the slow dynamics can be characterized by a simple scaling relationship, with a characteristic dynamic exponent of $1/4$ in the intermediate time regime.
△ Less
Submitted 27 May, 1992;
originally announced May 1992.
