-
Enhancing Irradiation Resistance in Refractory Medium Entropy Alloys with Simplified Chemistry
Authors:
M. A. Tunes,
D. Parkison,
B. Sun,
P. Willenshofer,
S. Samberger,
B. K. Derby,
J. K. S. Baldwin,
S. J. Fensin,
D. Sobieraj,
J. S. Wróbel,
J. Byggmästar,
S. Pogatscher,
E. Martinez,
D. Nguyen-Manh,
O. El-Atwani
Abstract:
Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii)…
▽ More
Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand extreme conditions, such as (i) severe radiation-damage arising from highly-energetic neutrons, (ii) embrittlement caused by implantation of H and He ions, and (iii) exposure to extreme high-temperatures and thermal gradients. Recent research demonstrated that two RHEAs - the WTaCrV and WTaCrVHf - can outperform both coarse-grained and nanocrystalline W in terms of its radiation response and microstructural stability. Chemical complexity and nanocrystallinity enhance the radiation tolerance of these new RHEAs, but their multi-element nature, including low-melting Cr, complicates bulk fabrication and limits practical applications. We demonstrate that reducing the number of alloying elements and yet retain high-radiation tolerance is possible within the ternary system W-Ta-V via synthesis of two novel nanocrystalline refractory medium-entropy alloys (RMEAs): the W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ (in at.\%). We experimentally show that the radiation response of the W-Ta-V system can be tailored by small additions of V, and such experimental result was validated with theoretical analysis of chemical short-range orders (CSRO) from combined ab-initio atomistic Monte-Carlo modeling. It is predicted from computational analysis that a small change in V concentration has a significant effect on the Ta-V CRSO between W$_{53}$Ta$_{44}$V$_{3}$ and W$_{53}$Ta$_{42}$V$_{5}$ leading to radiation-resistant microstructures in these RMEAs from chemistry stand-point of views. We deviate from the original high-entropy alloy concept to show that high radiation resistance can be achieved in systems with simplified chemical complexity.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Grain boundary metastability controls irradiation resistance in nanocrystalline metals
Authors:
Osman El-Atwani,
Annie K. Barnett,
Enrique Martinez,
Jian Han,
Asher C. Leff,
Chang-Yu Hung,
James E. Nathaniel,
Sicong He,
Emily H. Mang,
Larissa M. Woryk,
Khalid Hattar,
Blas P. Uberuaga,
David J. Srolovitz,
Michael L. Falk,
Jaime Marian,
Mitra L. Taheri
Abstract:
Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that the sink efficiency of a grain boundary is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibr…
▽ More
Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that the sink efficiency of a grain boundary is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibrium irradiation conditions. In this paper, we reveal that the denuded (i.e., defect-free) zone, typically the signature of a strong sink, can collapse as irradiation damage accumulates. We propose a radiation damage evolution model that captures this behavior based on the emergence of a series of irradiation defect-enabled metastable GB microstate changes that dynamically alter the ability of the GB to absorb further damage. We show that these microstate changes control further defect absorption and give rise to the formation of a defect network that manifests itself as a net Nye-tensor signal detectable via lattice curvature experiments.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Transcending the MAX phases concept of nanolaminated early transition metal carbides/nitrides -- the ZIA phases
Authors:
M. A. Tunes,
S. M. Drewry,
F. Schmidt,
J. A. Valdez,
M. M. Schneider,
C. A. Kohnert,
T. A. Saleh,
C. G. Schön,
S. Fensin,
O. El-Atwani,
N. Goossens,
S. Huang,
J. Vleugls,
S. A. Maloy,
K. Lambrinou
Abstract:
A new potential class of nanolaminated and structurally complex materials, herein conceived as the Zigzag IntermetAllic (ZIA) phases, is proposed. A study of the constituent phases of a specific Nb--Si--Ni intermetallic alloy revealed that its ternary H-phase, \textit{i.e.}, the Nb$_3$SiNi$_2$ intermetallic compound (IMC), is a crystalline solid with the close-packed \textit{fcc} Bravais lattice,…
▽ More
A new potential class of nanolaminated and structurally complex materials, herein conceived as the Zigzag IntermetAllic (ZIA) phases, is proposed. A study of the constituent phases of a specific Nb--Si--Ni intermetallic alloy revealed that its ternary H-phase, \textit{i.e.}, the Nb$_3$SiNi$_2$ intermetallic compound (IMC), is a crystalline solid with the close-packed \textit{fcc} Bravais lattice, the 312 MAX phase stoichiometry and a layered atomic arrangement that may define an entire class of nanolaminated IMCs analogous to the nanolaminated ceramic compounds known today as the MAX phases. The electron microscopy investigation of the Nb$_{3}$SiNi$_{2}$ compound -- the first candidate ZIA phase -- revealed a remarkable structural complexity, as its ordered unit cell is made of 96 atoms. The ZIA phases extend the concept of nanolaminated crystalline solids well beyond the MAX phases family of early transition metal carbides/nitrides, most likely broadening the spectrum of achievable material properties into domains typically not covered by the MAX phases. Furthermore, this work uncovers that both families of nanolaminated crystalline solids, \textit{i.e.}, the herein introduced \textit{fcc} ZIA phases and all known variants of the \textit{hcp} MAX phases, obey the same overarching stoichiometric rule $P_{x+y}A_xN_y$, where $x$ and $y$ are integers ranging from 1 to 6.
△ Less
Submitted 11 August, 2023;
originally announced August 2023.
-
Grain Boundary Softening from Stress Assisted Helium Cavity Coalescence in Ultrafine-Grained Tungsten
Authors:
W. S. Cunningham,
Y. Zhang,
S. L. Thomas,
O. El-Atwani,
Y. Wang,
J. R. Trelewicz
Abstract:
The formation of helium cavities in coarse-grained materials produces hardening proportional to the number density and size of the cavities and due to the interaction of dislocations with intragranular helium defects. In nanostructured metals containing a high density of interfacial sinks, preferential cavity formation on the grain boundaries instead produces softening and often attributed to enha…
▽ More
The formation of helium cavities in coarse-grained materials produces hardening proportional to the number density and size of the cavities and due to the interaction of dislocations with intragranular helium defects. In nanostructured metals containing a high density of interfacial sinks, preferential cavity formation on the grain boundaries instead produces softening and often attributed to enhanced interfacial plasticity. Employing two grades of ultrafine-grained tungsten, we explore this effect using targeted implantation studies to map cavity evolution as a function of the irradiation conditions and quantify its impact on the mechanical response through nanoindentation. Softening is reported at implantation temperatures above the threshold for preferential grain boundary cavity formation but at a sufficiently low fluence prior to the growth of intragranular cavities. Collective changes in the mean cavity size, density, and morphology beneath a residual impression on an implanted surface indicate that cavity coalescence accompanied the reduction in hardness. Complementary atomistic simulations demonstrate that, in tungsten grain structures exhibiting softening, grain boundary bubble coalescence is driven by stress concentrations that further act to localize strain in the grain boundaries through cooperative deformation processes involving local atomic shuffling and sliding, dislocation emission, and even the nucleation of unstable twinning events.
△ Less
Submitted 27 March, 2023;
originally announced March 2023.
-
Perspectives on Novel Refractory Amorphous High-Entropy Alloys in Extreme Environments
Authors:
Matheus A. Tunes,
Hi T. Vo,
Jon K. S. Baldwin,
Tarik A. Saleh,
Saryu J. Fensin,
Osman El-Atwani
Abstract:
Two new refractory amorphous high-entropy alloys (RAHEAs) within the W--Ta--Cr--V and W--Ta--Cr--V--Hf systems were herein synthesized using magnetron-sputtering and tested under high-temperature annealing and displacing irradiation using \textit{in situ} Transmission Electron Microscopy. While the WTaCrV RAHEA was found to be unstable under such tests, additions of Hf in this system composing a n…
▽ More
Two new refractory amorphous high-entropy alloys (RAHEAs) within the W--Ta--Cr--V and W--Ta--Cr--V--Hf systems were herein synthesized using magnetron-sputtering and tested under high-temperature annealing and displacing irradiation using \textit{in situ} Transmission Electron Microscopy. While the WTaCrV RAHEA was found to be unstable under such tests, additions of Hf in this system composing a new quinary WTaCrVHf RAHEA was found to be a route to achieve stability both under annealing and irradiation. A new effect of nanoprecipitate reassembling observed to take place within the WTaCrVHf RAHEA under irradiation indicates that a duplex microstructure composed of an amorphous matrix with crystalline nanometer-sized precipitates enhances the radiation response of the system. It is demonstrated that tunable chemical complexity arises as a new alloy design strategy to foster the use of novel RAHEAs within extreme environments. New perspectives for the alloy design and application of chemically-complex amorphous metallic alloys in extreme environments are presented with focus on their thermodynamic phase stability when subjected to high-temperature annealing and displacing irradiation.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
Outstanding Radiation Resistance of Tungsten-based High Entropy Alloys
Authors:
O. El-Atwani,
N. Li,
M. Li,
A. Devaraj,
M. Schneider,
D. Sobieraj,
J. S. Wrobel,
D. D. Nguyen-Manh,
S. A. Maloy,
E. Martinez
Abstract:
A novel W-based refractory high entropy alloy with outstanding radiation resistance has been developed. The alloy was grown as thin films showing a bimodal grain size distribution in the nanocrystalline and ultrafine regimes and a unique 4 nm lamella-like structure revealed by atom probe tomography (APT). Transmission electron microscopy (TEM) and X-ray diffraction show an underlying body-centered…
▽ More
A novel W-based refractory high entropy alloy with outstanding radiation resistance has been developed. The alloy was grown as thin films showing a bimodal grain size distribution in the nanocrystalline and ultrafine regimes and a unique 4 nm lamella-like structure revealed by atom probe tomography (APT). Transmission electron microscopy (TEM) and X-ray diffraction show an underlying body-centered cubic crystalline structure with certain black spots appearing after thermal annealing at elevated temperatures. Thorough analysis based on TEM and APT correlated the black spots with second phase particles rich in Cr and V. After both in situ and ex situ irradiation, these precipitates evolve to quasi-spherical particles with no sign of irradiation-created dislocation loops even after 8 dpa at either room temperature or 1073 K. Furthermore, nanomechanical testing shows a large hardness of 14 GPa in the as-deposited samples, with a slight increase after thermal annealing and almost negligible irradiation hardening. Theoretical modeling based on ab initio methodologies combined with Monte Carlo techniques predicts the formation of Cr and V rich second phase particles and points at equal mobilities of point defects as the origin of the exceptional radiation tolerance. The fact that these alloys are suitable for bulk production coupled with the exceptional radiation and mechanical properties makes them ideal structural materials for applications requiring extreme conditions.
△ Less
Submitted 5 November, 2018;
originally announced November 2018.