Showing 1–6 of 6 results for author: Ek, M

Representation of s-process abundances for comparison to data from bulk meteorites

Authors: Maria Lugaro, Mattias Ek, Mária Pető, Marco Pignatari, Georgy V. Makhatadze, Isaac J. Onyett, Maria Schönbächler

Abstract: Analysis of bulk meteorite compositions has revealed small isotopic variations due to the presence of material (e.g., stardust) that preserved the signature of nuclear reactions occurring in specific stellar sites. The interpretation of such anomalies provides evidence for the environment of the birth of the Sun, its accretion process, the evolution of the solar proto-planetary disk, and the forma… ▽ More Analysis of bulk meteorite compositions has revealed small isotopic variations due to the presence of material (e.g., stardust) that preserved the signature of nuclear reactions occurring in specific stellar sites. The interpretation of such anomalies provides evidence for the environment of the birth of the Sun, its accretion process, the evolution of the solar proto-planetary disk, and the formation of the planets. A crucial element of such interpretation is the comparison of the observed anomalies to predictions from models of stellar nucleosynthesis. To date, however, this comparison has been limited to a handful of model predictions. This is mostly because the calculated stellar abundances need to be transformed into a specific representation, which nuclear astrophysicists and stellar nucleosynthesis researchers are not familiar with. Here, we show in detail that this representation is needed to account for mass fractionation effects in meteorite data that can be generated both in nature and during instrumental analysis. We explain the required internal normalisation to a selected isotopic ratio, describe the motivations behind such representation more widely, and provide the tools to perform the calculations. Then, we present some examples considering two elements produced by the $slow$ neutron-capture ($s$) process: Sr and Mo. We show which specific representations for the Sr isotopic composition calculated by $s$-process models better disentangle the nucleosynthetic signatures from stars of different metallicity. For Mo, the comparison between data and models is improved due to a recent re-analysis of the $^{95}$Mo neutron-capture cross section. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Comments: Accepted for publication in the EPJA Special Issue on: 'From reactors to stars' in honor of Franz Käppeler

Origin of large meteoritic SiC stardust grains in metal-rich AGB stars

Authors: Maria Lugaro, Borbála Cseh, Blanka Világos, Amanda I. Karakas, Paolo Ventura, Flavia Dell'Agli, Reto Trappitsch, Melanie Hampel, Valentina D'Orazi, Claudio B. Pereira, Giuseppe Tagliente, Gyula M. Szabó, Marco Pignatari, Umberto Battino, Ashley Tattersall, Mattias Ek, Maria Schönbächler, Josef Hron, Larry R. Nittler

Abstract: Stardust grains that originated in ancient stars and supernovae are recovered from meteorites and carry the detailed composition of their astronomical sites of origin. We present evidence that the majority of large ($μ$m-sized) meteoritic silicon carbide (SiC) grains formed in C-rich asymptotic giant branch (AGB) stars that were more metal-rich than the Sun. In the framework of the slow neutron-ca… ▽ More Stardust grains that originated in ancient stars and supernovae are recovered from meteorites and carry the detailed composition of their astronomical sites of origin. We present evidence that the majority of large ($μ$m-sized) meteoritic silicon carbide (SiC) grains formed in C-rich asymptotic giant branch (AGB) stars that were more metal-rich than the Sun. In the framework of the slow neutron-captures (the s process) that occurs in AGB stars the lower-than-solar 88Sr/86Sr isotopic ratios measured in the large SiC grains can only be accompanied by Ce/Y elemental ratios that are also lower than solar, and predominately observed in metal-rich barium stars - the binary companions of AGB stars. Such an origin suggests that these large grains represent the material from high-metallicity AGB stars needed to explain the s-process nucleosynthesis variations observed in bulk meteorites (Ek et al. 2020). In the outflows of metal-rich, C-rich AGB stars SiC grains are predicted to be small ($\simeq$ 0.2 $μ$m-sized); large ($\simeq$ $μ$m-sized) SiC grains can grow if the number of dust seeds is two to three orders of magnitude lower than the standard value of $10^{-13}$ times the number of H atoms. We therefore predict that with increasing metallicity the number of dust seeds might decrease, resulting in the production of larger SiC grains. △ Less

Submitted 19 June, 2020; originally announced June 2020.

Comments: accepted for publication in The Astrophysical Journal

The origin of s-process isotope heterogeneity in the solar protoplanetary disk

Authors: Mattias Ek, Alison C. Hunt, Maria Lugaro, Maria Schönbächler

Abstract: Rocky asteroids and planets display nucleosynthetic isotope variations that are attributed to the heterogeneous distribution of stardust from different stellar sources in the solar protoplanetary disk. Here we report new high precision palladium isotope data for six iron meteorite groups, which display smaller nucleosynthetic isotope variations than the more refractory neighbouring elements. Based… ▽ More Rocky asteroids and planets display nucleosynthetic isotope variations that are attributed to the heterogeneous distribution of stardust from different stellar sources in the solar protoplanetary disk. Here we report new high precision palladium isotope data for six iron meteorite groups, which display smaller nucleosynthetic isotope variations than the more refractory neighbouring elements. Based on this observation we present a new model in which thermal destruction of interstellar medium dust results in an enrichment of s-process dominated stardust in regions closer to the Sun. We propose that stardust is depleted in volatile elements due to incomplete condensation of these elements into dust around asymptotic giant branch (AGB) stars. This led to the smaller nucleosynthetic variations for Pd reported here and the lack of such variations for more volatile elements. The smaller magnitude variations measured in heavier refractory elements suggest that material from high-metallicity AGB stars dominated stardust in the Solar System. These stars produce less heavy s-process elements compared to the bulk Solar System composition. △ Less

Submitted 6 February, 2020; originally announced February 2020.

Comments: 25 pages, 9 figures, 1 table

Journal ref: Nature Astronomy (2019)

Late metal-silicate separation on the IAB parent asteroid: Constraints from combined W and Pt isotopes and thermal modelling

Authors: Alison C. Hunt, David L. Cook, Tim Lichtenberg, Philip M. Reger, Mattias Ek, Gregor J. Golabek, Maria Schönbächler

Abstract: The short-lived $^{182}$Hf-$^{182}$W decay system is a powerful chronometer for constraining the timing of metal-silicate separation and core formation in planetesimals and planets. Neutron capture effects on W isotopes, however, significantly hamper the application of this tool. In order to correct for neutron capture effects, Pt isotopes have emerged as a reliable in-situ neutron dosimeter. This… ▽ More The short-lived $^{182}$Hf-$^{182}$W decay system is a powerful chronometer for constraining the timing of metal-silicate separation and core formation in planetesimals and planets. Neutron capture effects on W isotopes, however, significantly hamper the application of this tool. In order to correct for neutron capture effects, Pt isotopes have emerged as a reliable in-situ neutron dosimeter. This study applies this method to IAB iron meteorites, in order to constrain the timing of metal segregation on the IAB parent body. The $ε^{182}$W values obtained for the IAB iron meteorites range from -3.61 $\pm$ 0.10 to -2.73 $\pm$ 0.09. Correlating $ε^{\mathrm{i}}$Pt with $^{182}$W data yields a pre-neutron capture $^{182}$W of -2.90 $\pm$ 0.06. This corresponds to a metal-silicate separation age of 6.0 $\pm$ 0.8 Ma after CAI for the IAB parent body, and is interpreted to represent a body-wide melting event. Later, between 10 and 14 Ma after CAI, an impact led to a catastrophic break-up and subsequent reassembly of the parent body. Thermal models of the interior evolution that are consistent with these estimates suggest that the IAB parent body underwent metal-silicate separation as a result of internal heating by short-lived radionuclides and accreted at around 1.4 $\pm$ 0.1 Ma after CAIs with a radius of greater than 60 km. △ Less

Submitted 28 February, 2018; originally announced February 2018.

Comments: 11 pages, 8 figures, 2 tables; open access article under the CC BY-NC-ND license (see http://creativecommons.org/licenses/by-nc-nd/4.0/)

Journal ref: Earth and Planetary Science Letters, Volume 482, 15 January 2018, Pages 490-500

Prime Focus Spectrograph for the Subaru telescope: massively multiplexed optical and near-infrared fiber spectrograph

Authors: Hajime Sugai, Naoyuki Tamura, Hiroshi Karoji, Atsushi Shimono, Naruhisa Takato, Masahiko Kimura, Youichi Ohyama, Akitoshi Ueda, Hrand Aghazarian, Marcio Vital de Arruda, Robert H. Barkhouser, Charles L. Bennett, Steve Bickerton, Alexandre Bozier, David F. Braun, Khanh Bui, Christopher M. Capocasale, Michael A. Carr, Bruno Castilho, Yin-Chang Chang, Hsin-Yo Chen, Richard C. Y. Chou, Olivia R. Dawson, Richard G. Dekany, Eric M. Ek , et al. (59 additional authors not shown)

Abstract: The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy… ▽ More The Prime Focus Spectrograph (PFS) is an optical/near-infrared multifiber spectrograph with 2394 science fibers distributed across a 1.3-deg diameter field of view at the Subaru 8.2-m telescope. The wide wavelength coverage from 0.38 μm to 1.26 μm, with a resolving power of 3000, simultaneously strengthens its ability to target three main survey programs: cosmology, galactic archaeology and galaxy/AGN evolution. A medium resolution mode with a resolving power of 5000 for 0.71 μm to 0.89 μm will also be available by simply exchanging dispersers. We highlight some of the technological aspects of the design. To transform the telescope focal ratio, a broad-band coated microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of the cable system, optimizing overall throughput; a fiber with low focal ratio degradation is selected for the fiber-positioner and fiber-slit components, minimizing the effects of fiber movements and fiber bending. Fiber positioning will be performed by a positioner consisting of two stages of piezo-electric rotary motors. The positions of these motors are measured by taking an image of artificially back-illuminated fibers with the metrology camera located in the Cassegrain container; the fibers are placed in the proper location by iteratively measuring and then adjusting the positions of the motors. Target light reaches one of the four identical fast-Schmidt spectrograph modules, each with three arms. The PFS project has passed several project-wide design reviews and is now in the construction phase. △ Less

Submitted 2 July, 2015; originally announced July 2015.

Comments: 19 pages, 11 figures

Journal ref: Journal of Astronomical Telescopes, Instruments, and Systems, 1(3), 035001 (2015)

Progress with the Prime Focus Spectrograph for the Subaru Telescope: a massively multiplexed optical and near-infrared fiber spectrograph

Authors: Hajime Sugai, Naoyuki Tamura, Hiroshi Karoji, Atsushi Shimono, Naruhisa Takato, Masahiko Kimura, Youichi Ohyama, Akitoshi Ueda, Hrand Aghazarian, Marcio Vital de Arruda, Robert H. Barkhouser, Charles L. Bennett, Steve Bickerton, Alexandre Bozier, David F. Braun, Khanh Bui, Christopher M. Capocasale, Michael A. Carr, Bruno Castilho, Yin-Chang Chang, Hsin-Yo Chen, Richard C. Y. Chou, Olivia R. Dawson, Richard G. Dekany, Eric M. Ek , et al. (59 additional authors not shown)

Abstract: The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology,… ▽ More The Prime Focus Spectrograph (PFS) is an optical/near-infrared multi-fiber spectrograph with 2394 science fibers, which are distributed in 1.3 degree diameter field of view at Subaru 8.2-meter telescope. The simultaneous wide wavelength coverage from 0.38 um to 1.26 um, with the resolving power of 3000, strengthens its ability to target three main survey programs: cosmology, Galactic archaeology, and galaxy/AGN evolution. A medium resolution mode with resolving power of 5000 for 0.71 um to 0.89 um also will be available by simply exchanging dispersers. PFS takes the role for the spectroscopic part of the Subaru Measurement of Images and Redshifts project, while Hyper Suprime-Cam works on the imaging part. To transform the telescope plus WFC focal ratio, a 3-mm thick broad-band coated glass-molded microlens is glued to each fiber tip. A higher transmission fiber is selected for the longest part of cable system, while one with a better FRD performance is selected for the fiber-positioner and fiber-slit components, given the more frequent fiber movements and tightly curved structure. Each Fiber positioner consists of two stages of piezo-electric rotary motors. Its engineering model has been produced and tested. Fiber positioning will be performed iteratively by taking an image of artificially back-illuminated fibers with the Metrology camera located in the Cassegrain container. The camera is carefully designed so that fiber position measurements are unaffected by small amounts of high special-frequency inaccuracies in WFC lens surface shapes. Target light carried through the fiber system reaches one of four identical fast-Schmidt spectrograph modules, each with three arms. Prototype VPH gratings have been optically tested. CCD production is complete, with standard fully-depleted CCDs for red arms and more-challenging thinner fully-depleted CCDs with blue-optimized coating for blue arms. △ Less

Submitted 12 August, 2014; originally announced August 2014.

Comments: 14 pages, 12 figures, submitted to "Ground-based and Airborne Instrumentation for Astronomy V, Suzanne K. Ramsay, Ian S. McLean, Hideki Takami, Editors, Proc. SPIE 9147 (2014)"