-
Superconductivity-driven ferromagnetism and spin manipulation using vortices in the magnetic superconductor EuRbFe4As4
Authors:
Shigeyuki Ishida,
Daniel Kagerbauer,
Sigrid Holleis,
Kazuki Iida,
Koji Munakata,
Akiko Nakao,
Akira Iyo,
Hiraku Ogino,
Kenji Kawashima,
Michael Eisterer,
Hiroshi Eisaki
Abstract:
Magnetic superconductors are specific materials exhibiting two antagonistic phenomena, superconductivity and magnetism, whose mutual interaction induces various emergent phenomena, such as the reentrant superconducting transition associated with the suppression of superconductivity around the magnetic transition temperature (Tm), highlighting the impact of magnetism on superconductivity. In this s…
▽ More
Magnetic superconductors are specific materials exhibiting two antagonistic phenomena, superconductivity and magnetism, whose mutual interaction induces various emergent phenomena, such as the reentrant superconducting transition associated with the suppression of superconductivity around the magnetic transition temperature (Tm), highlighting the impact of magnetism on superconductivity. In this study, we report the experimental observation of the ferromagnetic order induced by superconducting vortices in the high-critical-temperature (high-Tc) magnetic superconductor EuRbFe4As4. Although the ground state of the Eu2+ moments in EuRbFe4As4 is helimagnetism below Tm, neutron diffraction and magnetization experiments show a ferromagnetic hysteresis of the Eu2+ spin alignment. We demonstrate that the direction of the Eu2+ moments is dominated by the distribution of pinned vortices based on the critical state model. Moreover, we demonstrate the manipulation of spin texture by controlling the direction of superconducting vortices, which can help realize spin manipulation devices using magnetic superconductors.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.
-
Unique defect structure and advantageous vortex pinning properties in superconducting CaKFe4As4
Authors:
Shigeyuki Ishida,
Akira Iyo,
Hiraku Ogino,
Hiroshi Eisaki,
Nao Takeshita,
Kenji Kawashima,
Keiichi Yanagisawa,
Yuuga Kobayashi,
Koji Kimoto,
Hideki Abe,
Motoharu Imai,
Jun-ichi Shimoyama,
Michael Eisterer
Abstract:
The lossless current-carrying capacity of a superconductor is limited by its critical current density (Jc). A key to enhance Jc towards real-life applications is engineering defect structures to optimize the pinning landscape. For iron-based superconductors (IBSs) considered as candidate materials for high-field applications, high Jc values have been achieved by various techniques to introduce art…
▽ More
The lossless current-carrying capacity of a superconductor is limited by its critical current density (Jc). A key to enhance Jc towards real-life applications is engineering defect structures to optimize the pinning landscape. For iron-based superconductors (IBSs) considered as candidate materials for high-field applications, high Jc values have been achieved by various techniques to introduce artificial pinning centres. Here we report extraordinary vortex pinning properties in CaKFe4As4 (CaK1144) arising from the inherent defect structure. Scanning transmission electron microscopy revealed the existence of nanoscale intergrowths of the CaFe2As2 phase, which is unique to CaK1144 formed as a line compound. The Jc properties in CaK1144 are found to be distinct from other IBSs characterized by a significant anisotropy with respect to the magnetic field orientation as well as a remarkable pinning mechanism significantly enhanced with increasing temperature. We propose a comprehensive explanation of the Jc properties based on the unique intergrowths acting as pinning centres.
△ Less
Submitted 10 July, 2019;
originally announced July 2019.
-
Coexisting spin resonance and long-range magnetic order of Eu in EuRbFe$_4$As$_4$
Authors:
K. Iida,
Y. Nagai,
S. Ishida,
M. Ishikado,
N. Murai,
A. D. Christianson,
H. Yoshida,
Y. Inamura,
H. Nakamura,
A. Nakao,
K. Munakata,
D. Kagerbauer,
M. Eisterer,
K. Kawashima,
Y. Yoshida,
H. Eisaki,
A. Iyo
Abstract:
Magnetic excitations and magnetic structure of EuRbFe$_4$As$_4$ were investigated by inelastic neutron scattering (INS), neutron diffraction, and random phase approximation (RPA) calculations. Below the superconducting transition temperature $T_\text{c}=36.5$~K, the INS spectra exhibit the neutron spin resonances at $Q_\text{res}=1.27(2)$~$\textÅ^{-1}$ and $1.79(3)$~$\textÅ^{-1}$. They correspond…
▽ More
Magnetic excitations and magnetic structure of EuRbFe$_4$As$_4$ were investigated by inelastic neutron scattering (INS), neutron diffraction, and random phase approximation (RPA) calculations. Below the superconducting transition temperature $T_\text{c}=36.5$~K, the INS spectra exhibit the neutron spin resonances at $Q_\text{res}=1.27(2)$~$\textÅ^{-1}$ and $1.79(3)$~$\textÅ^{-1}$. They correspond to the $\mathbf{Q}=(0.5,0.5,1)$ and $(0.5,0.5,3)$ nesting wave vectors, showing three dimensional nature of the band structure. The characteristic energy of the neutron spin resonance is $E_\text{res}=17.7(3)$~meV corresponding to $5.7(1)k_\text{B}T_\text{c}$. Observation of the neutron spin resonance mode and our RPA calculations in conjunction with the recent optical conductivity measurements are indicative of the $s_\pm$ superconducting pairing symmetry in EuRbFe$_4$As$_4$. In addition to the neutron spin resonance mode, upon decreasing temperature below the magnetic transition temperature $T_\text{N}=15$~K, the spin wave excitation originating in the long-range magnetic order of the Eu sublattice was observed in the low-energy inelastic channel. Single-crystal neutron diffraction measurements demonstrate that the magnetic propagation vector of the Eu sublattice is $\mathbf{k}=(0, 0, 0.25)$, representing the three-dimensional antiferromagnetic order. Linear spin wave calculations assuming the obtained magnetic structure with the intra- and inter-plane nearest neighbor exchange couplings of $J_1/k_\text{B}=-1.31$~K and $J_c/k_\text{B}=0.08$~K can reproduce quantitatively the observed spin wave excitation. Our results show that superconductivity and long-range magnetic order of Eu coexist in EuRbFe$_4$As$_4$ whereas the coupling between them is rather weak.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
Peculiarities of the electronic transport in half-metallic Co-based Heusler alloys
Authors:
V. V. Marchenkov,
Yu. A. Perevozchikova,
N. I. Kourov,
V. Yu. Irkhin,
M. Eisterer,
T. Gao
Abstract:
Electrical, magnetic and galvanomagnetic properties of half-metallic Heusler alloys of Co$_2$YZ (Y = Ti, V, Cr, Mn, Fe, Ni, and Z = Al, Si, Ga, Ge, In, Sn, Sb) were studied in the temperature range 4.2--900 K and in magnetic fields of up to 100 kOe. It was found that varying Y in affects strongly the electric resistivity and its temperature dependence $ρ(T)$, while this effect is not observed upon…
▽ More
Electrical, magnetic and galvanomagnetic properties of half-metallic Heusler alloys of Co$_2$YZ (Y = Ti, V, Cr, Mn, Fe, Ni, and Z = Al, Si, Ga, Ge, In, Sn, Sb) were studied in the temperature range 4.2--900 K and in magnetic fields of up to 100 kOe. It was found that varying Y in affects strongly the electric resistivity and its temperature dependence $ρ(T)$, while this effect is not observed upon changing Z. When Y is varied, extrema (maximum or minimum) are observed in $ρ(T)$ near the Curie temperature $T_C$. At $T < T_C$, the $ρ(T)$ behavior can be ascribed to a change in electronic energy spectrum near the Fermi level. The coefficients of the normal and anomalous Hall effect were determined. It was shown that the latter coefficient, $R_S$, is related to the residual resistivity $ρ_0$ by a power law $R_S \sim ρ_0^k/M_S$ with $M_S$ the spontaneous magnetization. The exponent $k$ was found to be 1.8 for Co$_2$FeZ alloys, which is typical for asymmetric scattering mechanisms, and 2.9 for Co$_2$YAl alloys, which indicates an additional contribution to the anomalous Hall effect. The temperature dependence of resistivity at low temperatures is analyzed and discussed in the framework of the two-magnon scattering theory.
△ Less
Submitted 5 December, 2017;
originally announced December 2017.
-
Nanoscale Magnetic Compasses
Authors:
Hidetsugu Shiozawa,
Desai Zhang,
Michael Eisterer,
Paola Ayala,
Thomas Pichler,
Martha R. McCartney,
David J. Smith
Abstract:
We have synthesized nanoscale magnetic compasses with high yield. These ferromagnetic iron carbide nano-particles, which are encapsulated in a pair of parallel carbon needles, change their direction in response to an external magnetic field. Electron holography reveals magnetic fields confined to the vicinity of the bicone-shaped particles, which are composed of few ferromagnetic domains. Aligned…
▽ More
We have synthesized nanoscale magnetic compasses with high yield. These ferromagnetic iron carbide nano-particles, which are encapsulated in a pair of parallel carbon needles, change their direction in response to an external magnetic field. Electron holography reveals magnetic fields confined to the vicinity of the bicone-shaped particles, which are composed of few ferromagnetic domains. Aligned magnetically and encapsulated in an acrylate polymer matrix, these nanocompasses exhibit anisotropic bulk magnetic permeability with an easy axis normal to the needle direction, that can be understood as a result of the anisotropic demagnetizing field of a nonspherical single-domain particle. This novel material with orthogonal magnetic and structural axes could be highly useful as magnetic components in electromagnetic wave absorbent materials and magnetorheological fluids.
△ Less
Submitted 3 March, 2017;
originally announced March 2017.
-
Do**-dependent critical current properties in K, Co, and P-doped BaFe2As2 single crystals
Authors:
Shigeyuki Ishida,
Dongjoon Song,
Hiraku Ogino,
Akira Iyo,
Hiroshi Eisaki,
Masamichi Nakajima,
Jun-ichi Shimoyama,
Michael Eisterer
Abstract:
In order to establish the do** dependence of the critical current properties in the iron-based superconductors, the in-plane critical current density (Jc) of BaFe2As2-based superconductors, Ba1-xKxFe2As2 (K-Ba122), Ba(Fe1-xCox)2As2 (Co-Ba122), and BaFe2(As1-xPx)2 (P-Ba122) in a wide range of do** concentration (x) was investigated by means of magnetization hysteresis loop (MHL) measurements on…
▽ More
In order to establish the do** dependence of the critical current properties in the iron-based superconductors, the in-plane critical current density (Jc) of BaFe2As2-based superconductors, Ba1-xKxFe2As2 (K-Ba122), Ba(Fe1-xCox)2As2 (Co-Ba122), and BaFe2(As1-xPx)2 (P-Ba122) in a wide range of do** concentration (x) was investigated by means of magnetization hysteresis loop (MHL) measurements on single-crystal samples. Depending on the dopant elements and their concentration, Jc exhibits a variety of magnetic-field (H) and temperature (T) dependences. (1) In the case of K-Ba122, MHL of the underdoped samples (x < 0.33) exhibits the second magnetization peak (SMP), which sustains high Jc at high H and high T, exceeding 10^5 A/cm2 at T = 25 K and H = 6 T for x = 0.30. On the other hand, SMP is missing in the optimally (x ~ 0.36-0.40) and overdoped (x ~ 0.50) samples, and consequently Jc rapidly decreases by more than one order of magnitude, although the change in Tc is within a few K. (2) For Co-Ba122, SMP is always present over the entire superconducting (SC) dome from the under (x ~ 0.05) to the overdoped (x ~ 0.12) region. However, the magnitude of Jc significantly changes with x, exhibiting a sharp maximum at x ~ 0.057, which is a slightly underdoped composition for Co-Ba122. (3) For P-Ba122, the highest Jc is attained at x = 0.30 corresponding to the highest Tc composition. For the overdoped samples, MHL is characterized by SMP located close to the irreversibility field. Common to the three do** variations, Jc becomes highest at the under-do** side of SC dome near the phase boundary between SC phase and the antiferromagnetic/orthorhombic phase. Also, the peak appears in a narrow range of do**, distinct from the Tc dome with broad maximum. These similarities in the three cases indicate that the observed do** dependence of Jc is intrinsic to the BaFe2As2-based superconductors.
△ Less
Submitted 6 January, 2017;
originally announced January 2017.
-
Assessing composition gradients in multifilamentary superconductors by means of magnetometry methods
Authors:
T. Baumgartner,
J. Hecher,
J. Bernardi,
S. Pfeiffer,
C. Senatore,
M. Eisterer
Abstract:
We present two magnetometry-based methods suitable for assessing gradients in the critical temperature and hence the composition of multifilamentary superconductors: AC magnetometry and Scanning Hall Probe Microscopy. The novelty of the former technique lies in the iterative evaluation procedure we developed, whereas the strength of the latter is the direct visualization of the temperature depende…
▽ More
We present two magnetometry-based methods suitable for assessing gradients in the critical temperature and hence the composition of multifilamentary superconductors: AC magnetometry and Scanning Hall Probe Microscopy. The novelty of the former technique lies in the iterative evaluation procedure we developed, whereas the strength of the latter is the direct visualization of the temperature dependent penetration of a magnetic field into the superconductor. Using the example of a PIT Nb3Sn wire, we demonstrate the application of these techniques, and compare the respective results to each other and to EDX measurements of the Sn distribution within the sub-elements of the wire.
△ Less
Submitted 7 November, 2016;
originally announced November 2016.
-
Performance Boost in Industrial Multifilamentary Nb3Sn Wires due to Radiation Induced Pinning Centers
Authors:
T. Baumgartner,
M. Eisterer,
H. W. Weber,
R. Flükiger,
C. Scheuerlein,
L. Bottura
Abstract:
We report non-Cu critical current densities of 4.09 * 10^9 A/m^2 at 12 T and 2.27 * 10^9 A/m^2 at 15 T obtained from transport measurements on a Ti-alloyed RRP Nb3Sn wire after irradiation to a fast neutron fluence of 8.9 * 10^21 m^-2. These values are to our knowledge unprecedented in multifilamentary Nb3Sn, and they correspond to a Jc enhancement of approximately 60% relative to the unirradiated…
▽ More
We report non-Cu critical current densities of 4.09 * 10^9 A/m^2 at 12 T and 2.27 * 10^9 A/m^2 at 15 T obtained from transport measurements on a Ti-alloyed RRP Nb3Sn wire after irradiation to a fast neutron fluence of 8.9 * 10^21 m^-2. These values are to our knowledge unprecedented in multifilamentary Nb3Sn, and they correspond to a Jc enhancement of approximately 60% relative to the unirradiated state. Our magnetometry data obtained on short wire samples irradiated to fast neutron fluences of up to 2.5 * 10^22 m^-2 indicate the possibility of an even better performance, whereas earlier irradiation studies on bronze-processed Nb3Sn wires with a Sn content further from stoichiometry attested a decline of the critical current density at such high fluences. We show that radiation induced point-pinning centers rather than an increase of the upper critical field are responsible for this Jc enhancement, and argue that these results call for further research on pinning landscape engineering.
△ Less
Submitted 21 April, 2015;
originally announced April 2015.
-
One-dimensional pinning behavior in Co-doped BaFe2As2 thin films
Authors:
V. Mishev,
W. Seeböck,
M. Eisterer,
K. Iida,
F. Kurth,
J. Hänisch,
E. Reich,
B. Holzapfel
Abstract:
Angle-resolved transport measurements revealed that planar defects dominate flux pinning in the investigated Co-doped BaFe2As2 thin film. For any given field and temperature, the critical current depends only on the angle between the crystallographic c-axis and the applied magnetic field but not on the angle between the current and the field. The critical current is therefore limited only by the i…
▽ More
Angle-resolved transport measurements revealed that planar defects dominate flux pinning in the investigated Co-doped BaFe2As2 thin film. For any given field and temperature, the critical current depends only on the angle between the crystallographic c-axis and the applied magnetic field but not on the angle between the current and the field. The critical current is therefore limited only by the in-plane component of the Lorentz force but independent of the out-of-plane component, which is entirely balanced by the pinning force exerted by the planar defects. This one-dimensional pinning behavior shows similarities and differences to intrinsic pinning in layered superconductors.
△ Less
Submitted 29 January, 2014;
originally announced January 2014.
-
Effects of Neutron Irradiation on Pinning Force Scaling in State-of-the-Art Nb3Sn Wires
Authors:
T. Baumgartner,
M. Eisterer,
H. W. Weber,
R. Flükiger,
C. Scheuerlein,
L. Bottura
Abstract:
We present an extensive irradiation study involving five state-of-the-art Nb3Sn wires which were subjected to sequential neutron irradiation up to a fast neutron fluence of 1.6 * 10^22 m^-2 (E > 0.1 MeV). The volume pinning force of short wire samples was assessed in the temperature range from 4.2 to 15 K in applied fields of up to 7 T by means of SQUID magnetometry in the unirradiated state and a…
▽ More
We present an extensive irradiation study involving five state-of-the-art Nb3Sn wires which were subjected to sequential neutron irradiation up to a fast neutron fluence of 1.6 * 10^22 m^-2 (E > 0.1 MeV). The volume pinning force of short wire samples was assessed in the temperature range from 4.2 to 15 K in applied fields of up to 7 T by means of SQUID magnetometry in the unirradiated state and after each irradiation step. Pinning force scaling computations revealed that the exponents in the pinning force function differ significantly from those expected for pure grain boundary pinning, and that fast neutron irradiation causes a substantial change in the functional dependence of the volume pinning force. A model is presented, which describes the pinning force function of irradiated wires using a two-component ansatz involving a point-pinning contribution stemming from radiation induced pinning centers. The dependence of this point-pinning contribution on fast neutron fluence appears to be a universal function for all examined wire types.
△ Less
Submitted 27 November, 2013;
originally announced November 2013.
-
Critical current anisotropy in Nd-1111 single crystals and the infuence of neutron irradiation
Authors:
M. Eisterer,
V. Mishev,
M. Zehetmayer,
N. D. Zhigadlo,
S. Katrych,
J. Karpinski
Abstract:
We report on angle-resolved magnetization measurements on NdFeAsO$_{0.65}$F$_{0.35}$ (Nd-1111) single crystals. The field dependence of the critical current density, $J_c$, is non-monotonous in these crystals at all orientations and temperatures due to the fishtail effect, which strongly influences the angular dependence of $J_c$. The currents decrease as the field is tilted from the crystallograp…
▽ More
We report on angle-resolved magnetization measurements on NdFeAsO$_{0.65}$F$_{0.35}$ (Nd-1111) single crystals. The field dependence of the critical current density, $J_c$, is non-monotonous in these crystals at all orientations and temperatures due to the fishtail effect, which strongly influences the angular dependence of $J_c$. The currents decrease as the field is tilted from the crystallographic c-axis at low fields, but increase at high fields. A peak occurs in the angular dependence of $J_c$ at intermediate fields. The critical currents are significantly enhanced after irradiation with fast neutrons and the fishtail disappears. The different current anisotropies at low and high fields, however, persist. We discuss the data in the framework of the anisotropic scaling approach and propose a transition from dominant pinning by large defects of low density at low fields to pinning by small defects of high density at high fields in the pristine crystal. Strong pinning dominates at all fields after the irradiation, and the angular dependence of $J_c$ can be described by anisotropic scaling only after an appropriate extension to this pinning regime.
△ Less
Submitted 14 November, 2013;
originally announced November 2013.
-
Stress dependence of the critical currents in neutron irradiated (RE)BCO coated conductors
Authors:
J. Emhofer,
M. Eisterer,
H. W. Weber
Abstract:
The application of HTS coated conductors in future fusion or accelerator magnets is currently of increasing interest. High Lorentz forces and therefore high hoop stresses act on the conductors in large coils. The conductor is furthermore exposed to neutron radiation in fusion or accelerator magnets. The expected neutron fluence over the desired lifetime of such magnets can be simulated by irradiat…
▽ More
The application of HTS coated conductors in future fusion or accelerator magnets is currently of increasing interest. High Lorentz forces and therefore high hoop stresses act on the conductors in large coils. The conductor is furthermore exposed to neutron radiation in fusion or accelerator magnets. The expected neutron fluence over the desired lifetime of such magnets can be simulated by irradiation experiments in a fission reactor. The coated conductors were characterized in the pristine state and after irradiation to the ITER design fluence. The sensitivity of the critical currents to applied stress was measured in liquid nitrogen. The cold part of the set-up was positioned between a rotatable split coil electro-magnet for assessing the Ic-anisotropy up to 1.4T under maximum Lorentz force configuration. The Ic-sensitivity to applied stress changed significantly in the GdBCO/IBADconductors after irradiation, whereas nearly no change was observed in the YBCO/RABiTS-conductor. Furthermore, Ic and Tc were strongly reduced in the GdBCO/IBAD-sample after irradiation. The angular dependence of Ic changed for both samples in different ways after the irradiation, but no change in the angular dependence was observed upon applying stress. The high neutron capture cross-section of Gd and the resulting strong reduction of Tc seem to be responsible for the different stress dependence of Ic in irradiated Gd-123 coated conductors.
△ Less
Submitted 18 January, 2013;
originally announced January 2013.
-
Orbital and spin magnetic moments of transforming 1D iron inside metallic and semiconducting carbon nanotubes
Authors:
Antonio Briones-Leon,
Paola Ayala,
Xianjie Liu,
Hiromichi Kataura,
Kazuhiro Yanagi,
Eugen Weschke,
Michael Eisterer,
Thomas Pichler,
Hidetsugu Shiozawa
Abstract:
The orbital and spin magnetic properties of iron inside transforming metallic and semiconducting 1D carbon nanotube hybrids are studied by means of local x-ray magnetic circular dichroism (XMCD) and bulk superconducting quantum interference device (SQUID) measurements. Nanotube hybrids are initially ferrocene filled single-walled carbon nanotubes (SWCNT) of different metallicities. After a high te…
▽ More
The orbital and spin magnetic properties of iron inside transforming metallic and semiconducting 1D carbon nanotube hybrids are studied by means of local x-ray magnetic circular dichroism (XMCD) and bulk superconducting quantum interference device (SQUID) measurements. Nanotube hybrids are initially ferrocene filled single-walled carbon nanotubes (SWCNT) of different metallicities. After a high temperature nanochemical reaction ferrocene molecules react with each other to form iron nano clusters. We show that the ferrocenes molecular orbitals interact differently with the SWCNT of different metallicities without significant XMCD response. This XMCD at various temperatures and magnetic fields reveals that the orbital and/or spin magnetic moments of the encapsulated iron are altered drastically as the transformation to 1D Fe nanoclusters takes place. The orbital and spin magnetic moments are both found to be larger in filled semiconducting nanotubes than in the metallic sample. This could mean that the magnetic polarizations of the encapsulated material is dependent on the metallicity of the tubes. From a comparison between the iron 3d magnetic moments and the bulk magnetism measured by SQUID, we conclude that the delocalized magnetisms dictate the magnetic properties of these 1D hybrid nanostructures.
△ Less
Submitted 19 September, 2012;
originally announced September 2012.
-
Rotating sample magnetometer for cryogenic temperatures and high magnetic fields
Authors:
M. Eisterer,
F. Hengstberger,
C. S. Voutsinas,
N. Hörhager,
S. Sorta,
J. Hecher,
H. W. Weber
Abstract:
We report on the design and implementation of a rotating sample magnetometer (RSM) operating in the variable temperature insert of a cryostat equipped with a high-field magnet. The limited space and the cryogenic temperatures impose the most critical design parameters: the small bore size of the magnet requires a very compact pick-up coil system and the low temperatures demand a very careful desig…
▽ More
We report on the design and implementation of a rotating sample magnetometer (RSM) operating in the variable temperature insert of a cryostat equipped with a high-field magnet. The limited space and the cryogenic temperatures impose the most critical design parameters: the small bore size of the magnet requires a very compact pick-up coil system and the low temperatures demand a very careful design of the bearings. Despite these difficulties the RSM achieves excellent resolution at high magnetic field sweep rates, exceeding that of a typical vibrating sample magnetometer by about a factor of ten. In addition the gas-flow cryostat and the high-field superconducting magnet provide a temperature and magnetic field range unprecedented for this type of magnetometer.
△ Less
Submitted 27 May, 2011;
originally announced May 2011.
-
Anisotropic critical currents in FeSe0.5Te0.5 films and the influence of neutron irradiation
Authors:
M. Eisterer,
R. Raunicher,
H. W. Weber,
E. Bellingeri,
M. R. Cimberle,
I. Pallecchi,
M. Putti,
C. Ferdeghini
Abstract:
We report on measurements of the superconducting properties of FeSe05Te05 thin films grown on lanthanum aluminate. The films have high transition temperatures (above 19 K) and sharp resistive transitions in fields up to 15 T. The temperature dependence of the upper critical field and the irreversibility lines are steep and anisotropic, as recently reported for single crystals. The critical current…
▽ More
We report on measurements of the superconducting properties of FeSe05Te05 thin films grown on lanthanum aluminate. The films have high transition temperatures (above 19 K) and sharp resistive transitions in fields up to 15 T. The temperature dependence of the upper critical field and the irreversibility lines are steep and anisotropic, as recently reported for single crystals. The critical current densities, assessed by magnetization measurements in a vector VSM, were found to be well above 10^9 Am-2 at low temperatures. In all samples, the critical current as a function of field orientation has a maximum, when the field is oriented parallel to the film surface. The maximum indicates the presence of correlated pinning centers. A minimum occurs in three films, when the field is applied perpendicular to the film plane. In the forth film, instead, a local maximum caused by c-axis correlated pinning centers was found at this orientation. The irradiation of two films with fast neutrons did not change the properties drastically, where a maximum enhancement of the critical current by a factor of two was found.
△ Less
Submitted 23 March, 2011;
originally announced March 2011.
-
Magnetic measurement of the critical current anisotropy in coated conductors
Authors:
F. Hengstberger,
M. Eisterer,
H. W. Weber
Abstract:
We determine the critical current anisotropy at maximum Lorentz force from hysteresis loops in a vibrating sample magnetometer. To eliminate the signal of spurious variable Lorentz force currents it is sufficient to cut the sample to a specific length, which is calculated from the position dependent sensitivity of the instrument. The procedure increases the resolution of the measurement and the re…
▽ More
We determine the critical current anisotropy at maximum Lorentz force from hysteresis loops in a vibrating sample magnetometer. To eliminate the signal of spurious variable Lorentz force currents it is sufficient to cut the sample to a specific length, which is calculated from the position dependent sensitivity of the instrument. The procedure increases the resolution of the measurement and the results compare well to transport data on the same sample. As the electric field in magnetisation measurements is lower than in transport experiments the anisotropy at high currents (low temperatures and fields) can be measured without the need of making current contacts or any special sample preparation.
△ Less
Submitted 10 January, 2011;
originally announced January 2011.
-
Effects of high pressure on the physical properties of MgB2
Authors:
T. Prikhna,
W. Gawalek,
Ya. Savchuk,
A. Soldatov,
V. Sokolovsky,
M. Eisterer,
H. W. Weber,
J. Noudem,
M. Serga,
V. Turkevich,
M. Tompsic,
V. Tkach,
N. Danilenko,
W. Goldacker,
F. Karau,
I. Fesenko,
M. Rindfleisch,
J. Dellith,
M. Wendt,
S. You,
V. Meerovich,
S. Dub,
V. Moshchil,
N. Sergienko,
A. Kozyrev
, et al. (5 additional authors not shown)
Abstract:
The synthesis of MgB2-based materials under high pressure gave the possibility to suppress the evaporation of magnesium and to obtain near theoretically dense nanograined structures with high superconducting, thermal conducting, and mechanical characteristics: critical current densities of 1.8-1.0 \cdot 106 A/cm2 in the self field and 103 A/cm2 in a magnetic field of 8 T at 20 K, 5-3 \cdot 105 A/c…
▽ More
The synthesis of MgB2-based materials under high pressure gave the possibility to suppress the evaporation of magnesium and to obtain near theoretically dense nanograined structures with high superconducting, thermal conducting, and mechanical characteristics: critical current densities of 1.8-1.0 \cdot 106 A/cm2 in the self field and 103 A/cm2 in a magnetic field of 8 T at 20 K, 5-3 \cdot 105 A/cm2 in self field at 30 K, the corresponding critical fields being HC2 = 15 T at 22 K and irreversible fields Hirr =13 T at 20 K, and Hirr =3.5 T at 30 K, thermal conduction of 53+/-2 W/(m \cdot κ), the Vickers hardness Hv=10.12+/-0.2 GPa under a load of 148.8 N and the fracture toughness K1C = 7.6+/-2.0 MPa m0.5 under the same load, the Young modulus E=213 GPa. Estimation of quenching current and AC losses allowed the conclusion that highpressure-prepared materials are promising for application in transformer-type fault current limiters working at 20-30 K.
△ Less
Submitted 12 May, 2010;
originally announced May 2010.
-
Disorder effects and current percolation in FeAs based superconductors
Authors:
M. Eisterer,
M. Zehetmayer,
H. W. Weber,
J. Jiang,
J. D. Weiss,
A. Yamamoto,
E. E. Hellstrom,
D. C. Larbalestier,
N. D. Zhigadlo,
J. Karpinski
Abstract:
We report the influence of atomic disorder introduced by sequential neutron irradiation on the basic superconducting properties, flux pinning and grain connectivity. Two different polycrystalline Sm-1111 samples (SmFeAsO_{1-x}F_x) and two Ba-122 single crystals (BaFe_{1.8}Co_{0.2}As_2) were investigated. The monotonous decrease of the transition temperature with neutron fluence degrades the uppe…
▽ More
We report the influence of atomic disorder introduced by sequential neutron irradiation on the basic superconducting properties, flux pinning and grain connectivity. Two different polycrystalline Sm-1111 samples (SmFeAsO_{1-x}F_x) and two Ba-122 single crystals (BaFe_{1.8}Co_{0.2}As_2) were investigated. The monotonous decrease of the transition temperature with neutron fluence degrades the upper critical field, at least in the investigated temperature region. Pinning on the other hand is largely improved, with a different optimal defect concentration (fluence) in the two materials. The analysis of the current flow in the polycrystalline samples reveals weak link behaviour in the majority of grain connections and the existence of stronger grain connections. The density of the latter seems to be close to the percolation threshold (i.e. the minimum fraction for a continuous current path). Both types of connections are sensitive to disorder and degrade upon neutron irradiation.
△ Less
Submitted 29 January, 2010;
originally announced January 2010.
-
Higher borides and oxygen-enriched Mg-B-O inclusions as possible pinning centers in nanostructural magnesium diboride and the influence of additives on their formation
Authors:
Tatiana Prikhna,
Wolfgang Gawalek,
Yaroslav Savchuk,
Vasiliy Tkach,
Nikolay Danilenko,
Michael Wendt,
Jan Dellith,
Harold Weber,
Michael Eisterer,
Viktor Moshchil,
Nina Sergienko,
Artem Kozyrev,
Peter Nagorny,
Andrey Shapovalov,
Vladimir Melnikov,
Sergey Dub,
Doris Litzkendorf,
Tobias Habisreuther,
Christa Schmidt,
Athanasios Mamalis,
Vladimir Sokolovsky,
Vladimir Sverdun,
Fridrich Karau,
Alexandra Starostina
Abstract:
The study of high pressure (2 GPa) synthesized MgB2-based materials allows us to conclude that higher borides (with near MgB12 stoichiometry) and oxygen-enriched Mg-B-O inclusions can be pinning centers in nanostructural magnesium diboride matrix (with average grain sizes of 15-37 nm). It has been established that additions of Ti or SiC as well as manufacturing temperature can affect the size, a…
▽ More
The study of high pressure (2 GPa) synthesized MgB2-based materials allows us to conclude that higher borides (with near MgB12 stoichiometry) and oxygen-enriched Mg-B-O inclusions can be pinning centers in nanostructural magnesium diboride matrix (with average grain sizes of 15-37 nm). It has been established that additions of Ti or SiC as well as manufacturing temperature can affect the size, amount and distribution of these inclusions in the material structure and thus, influence critical current density. The superconducting behavior of materials with near MgB12 stoichiometry of matrix is discussed.
△ Less
Submitted 12 January, 2010;
originally announced January 2010.
-
The influence of weak texture on the critical currents in polycrystalline MgB$_2$
Authors:
M. Eisterer,
H. W. Weber
Abstract:
The current transport in polycrystalline MgB$_2$ is strongly influenced by the intrinsic anisotropy of this superconductor. Untextured bulks and wires are macroscopically isotropic, but the grains retain their anisotropic properties and the field dependence of the critical currents is much stronger than in isotropic superconductors. Weakly or partially textured tapes are macroscopically anisotro…
▽ More
The current transport in polycrystalline MgB$_2$ is strongly influenced by the intrinsic anisotropy of this superconductor. Untextured bulks and wires are macroscopically isotropic, but the grains retain their anisotropic properties and the field dependence of the critical currents is much stronger than in isotropic superconductors. Weakly or partially textured tapes are macroscopically anisotropic, but the anisotropy of the zero resistivity (or irreversibility) field is smaller than the intrinsic upper critical field anisotropy, $γ$. The \Jc-anisotropy is field and temperature dependent and can be much larger than $γ$. The most suitable parameter for the quantification of the macroscopic anisotropy is, therefore, the anisotropy of the zero resistivity field. It is difficult to distinguish between a higher degree of texture at a lower intrinsic anisotropy and a weaker texture at higher anisotropy and hardly possible based on the field dependence of the critical current anisotropy alone. The knowledge of the upper critical field is crucial and angular resolved measurements of either the critical currents or, better, the resistive in-field transitions are favorable for this purpose.
△ Less
Submitted 11 January, 2010;
originally announced January 2010.
-
Thickness dependence of the critical current density in superconducting films: a geometrical approach
Authors:
F. Hengstberger,
M. Eisterer,
H. W. Weber
Abstract:
We analyze the influence of the magnetic field generated by the supercurrents (self-field) on the current density distribution by numerical simulations. The thickness of the superconducting film determines the self-field and consequently the critical current density at zero applied field. We find an equation, which derives the thickness dependence of the critical current density from its depende…
▽ More
We analyze the influence of the magnetic field generated by the supercurrents (self-field) on the current density distribution by numerical simulations. The thickness of the superconducting film determines the self-field and consequently the critical current density at zero applied field. We find an equation, which derives the thickness dependence of the critical current density from its dependence on the magnetic induction. Solutions of the equation reproduce numerical simulations to great accuracy, thus enabling a quantification of the dependence of the self-field critical current density with increasing film thickness. This result is technologically relevant for the development of coated conductors with thicker superconducting layers.
△ Less
Submitted 7 January, 2010;
originally announced January 2010.
-
Inhomogeneity of Magnesium Diboride Structure and its Effect on Critical Current Density
Authors:
T. Prikhna,
W. Gawalek,
Ya. Savchuk,
A. Kozyrev,
M. Wendt,
J. Dellith,
W. Goldacker,
S. Dub,
N. Sergienko,
T. Habisreuther,
V. Moshchil,
U. Dittrich,
W. Karau,
J. Noudem,
Ch. Schmidt,
V. Turkevich,
D. Litzkendorf,
H. Weber,
M. Eisterer,
V. Melnikov,
P. Nagorny,
V. Sverdun
Abstract:
The influence of the oxygen segregation into Mg-B-O inclusions (which are oxygen enriched as compared to the matrix material) and the formation of boron enriched phases (with near MgB12 composition) in MgB2 structure on pinning in magnesium diboride and the effect of SiC and Ti alloying on the formation of structural inhomogenities in MgB2 are discussed. A nanostructural material of near theoret…
▽ More
The influence of the oxygen segregation into Mg-B-O inclusions (which are oxygen enriched as compared to the matrix material) and the formation of boron enriched phases (with near MgB12 composition) in MgB2 structure on pinning in magnesium diboride and the effect of SiC and Ti alloying on the formation of structural inhomogenities in MgB2 are discussed. A nanostructural material of near theoretical density (2.7 g/cm3) based on MgB2-SiC (10 wt. percents of 200-800 nm SiC was added), which is characterized by high jc (1000000 A/cm2 in 1 T - 100000 A/cm2 in 3.5 T at 20 K and 100000 A/cm2 at 35 K) has been synthesized at 2 GPa.
△ Less
Submitted 24 December, 2009;
originally announced December 2009.
-
Nanostructural Superconducting Materials for Fault Current Limiters and Cryogenic Electrical Machines
Authors:
T. A. Prikhna,
W. Gawalek,
Ya. M. Savchuk,
N. V. Sergienko,
V. E. Moshchil,
V. Sokolovsky,
J. Vajda,
V. N. Tkach,
F. Karau,
H. Weber,
M. Eisterer,
A. Juolain,
J. Rabier,
X. Chaud,
M. Wendt,
J. Dellith,
N. I. Danilenko,
T. Habisreuther,
S. N. Dub,
V. Meerovich,
D. Litzkendorf,
P. A. Nagorny,
L. K. Kovalev,
Ch. Schmidt,
V. S. Melnikov
, et al. (5 additional authors not shown)
Abstract:
Materials of the Y-Ba-Cu-O (melt-textured YBa2Cu3O7-d-based materials or MT-YBCO) and Mg-B-O (MgB2-based materials) systems with high superconducting performance, which can be attained due to the formation of regularly distributed nanostructural defects and inhomogenities in their structure can be effectively used in cryogenic technique, in particular in fault current limiters and electrical mac…
▽ More
Materials of the Y-Ba-Cu-O (melt-textured YBa2Cu3O7-d-based materials or MT-YBCO) and Mg-B-O (MgB2-based materials) systems with high superconducting performance, which can be attained due to the formation of regularly distributed nanostructural defects and inhomogenities in their structure can be effectively used in cryogenic technique, in particular in fault current limiters and electrical machines (electromotors, generators, pumps for liquid gases, etc.). The developed processes of high-temperature (900-800 oC) oxygenation under elevated pressure (16 MPa) of MT-YBCO and high-pressure (2 GPa) synthesis of MgB2-based materials allowed us to attain high SC (critical current densities, upper critical fields, fields of irreversibility, trapped magnetic fields) and mechanical (hardness, fracture toughness, Young modulus) characteristics. It has been shown that the effect of materials properties improvement in the case of MT-YBCO was attained due to the formation of high twin density (20-22 micron-1), prevention of macrockracking and reduction (by a factor of 4.5) of microcrack density, and in the case of MgB2-based materials due to the formation of oxygen-enriched as compared to the matrix phase fine-dispersed Mg-B-O inhomogenities as well as inclusions of higher borides with near-MgB12 stoichiometry in the Mg-B-O matrix (with 15-37 nm average grain sizes). The possibility is shown to obtain the rather high Tc (37 K) and critical current densities in materials with MgB12 matrix (with 95 percent of shielding fraction as calculated from the resistant curve).
△ Less
Submitted 24 December, 2009;
originally announced December 2009.
-
Effect of higher borides and inhomogeneity of oxygen distribution on critical current density of undoped and doped magnesium diboride
Authors:
T. A. Prikhna,
W. Gawalek,
V. M. Tkach,
N. I. Danilenko,
Ya M. Savchuk,
S. N. Dub,
V. E. Moshchil,
A. V. Kozyrev,
N. V. Sergienko,
M. Wendt,
V. S. Melnikov,
J. Dellith,
H Weber,
M Eisterer,
Ch Schmidt,
T Habisreuther,
D Litzkendorf,
J Vajda,
A. P. Shapovalov,
V. Sokolovsky,
P. A. Nagorny,
V. B. Sverdun,
J. Kosa,
F. Karau,
A. V. Starostina
Abstract:
The effect of do** with Ti, Ta, SiC in complex with synthesis temperature on the amount and distribution of structural inhomogeneities in MgB2 matrix of high-pressuresynthesized-materials (2 GPa) which can influence pining: higher borides (MgB12) and oxygen-enriched Mg-B-O inclusions, was established and a mechanism of do** effect on jc increase different from the generally accepted was prop…
▽ More
The effect of do** with Ti, Ta, SiC in complex with synthesis temperature on the amount and distribution of structural inhomogeneities in MgB2 matrix of high-pressuresynthesized-materials (2 GPa) which can influence pining: higher borides (MgB12) and oxygen-enriched Mg-B-O inclusions, was established and a mechanism of do** effect on jc increase different from the generally accepted was proposed. Near theoretically dense SiC-doped material exhibited jc= 1000000 A/sq. cm in 1T field and Hirr =8.5 T at 20 K. The highest jc in fields above 9, 6, and 4 T at 10, 20, and 25 K, respectively, was demonstrated by materials synthesized at 2 GPa, 600 oC from Mg and B without additions (at 20 K jc= 100 A/sq. cm in 10 T field). Materials synthesized from Mg and B taken up to 1:20 ratio were superconductive. The highest jc (60000 A/sq. cm at 20 K in zero field, Hirr= 5 T) and the amount of SC phase (95.3 percents of shielding fraction), Tc being 37 K were demonstrated by materials having near MgB12 composition of the matrix. The materials with MgB12 matrix had a doubled microhardness of that with MgB2 matrix (25 GPa and 13.08 GPa, at a load of 4.9 N, respectively).
△ Less
Submitted 24 December, 2009;
originally announced December 2009.
-
Numerical extension of the power law Jc(B) to zero field in thin superconducting films
Authors:
F. Hengstberger,
M. Eisterer,
H. W. Weber
Abstract:
Numerical simulations of the current and field distribution in thin superconducting films are carried out for a given material law Jc(B) and as a function of the applied field H, taking the sample's self-field into account. The dependence of the critical current density on the applied field Jc(H) is computed for comparison with experiment, considering the geometry of transport measurements.
We…
▽ More
Numerical simulations of the current and field distribution in thin superconducting films are carried out for a given material law Jc(B) and as a function of the applied field H, taking the sample's self-field into account. The dependence of the critical current density on the applied field Jc(H) is computed for comparison with experiment, considering the geometry of transport measurements.
We show that extrapolating the high field power law Jc \propto B^{-α} to the lowest fields results in a finite critical current at zero applied field Jc(H=0), despite the singularity of Jc(B). Moreover, particular features of the experiment, such as a low field plateau in Jc(H), are reproduced and found to be determined by the self-field.
△ Less
Submitted 10 December, 2009;
originally announced December 2009.
-
Disorder Induced Effects on the Critical Current Density of Iron Pnictide BaFe_1.8 Co_0.2 As_2 single crystals
Authors:
M. Zehetmayer,
M. Eisterer,
H. W. Weber,
J. Jiang,
J. D. Weiss,
A. Yamamoto,
A. A. Polyanskii,
E. E. Hellstrom,
D. C. Larbalestier
Abstract:
Investigating the role of disorder in superconductors is an essential part of characterizing the fundamental superconducting properties as well as assessing potential applications of the material. In most cases, the information available on the defect matrix is poor, making such studies difficult, but the situation can be improved by introducing defects in a controlled way, as provided by neutro…
▽ More
Investigating the role of disorder in superconductors is an essential part of characterizing the fundamental superconducting properties as well as assessing potential applications of the material. In most cases, the information available on the defect matrix is poor, making such studies difficult, but the situation can be improved by introducing defects in a controlled way, as provided by neutron irradiation. In this work, we analyze the effects of neutron irradiation on a Ba(Fe$_{1-x}$Co$_x$)$_2$As$_2$ single crystal. We mainly concentrate on the magnetic properties which were determined by magnetometry. Introducing disorder by neutron irradiation leads to significant effects on both the reversible and the irreversible magnetic properties, such as the transition temperature, the upper critical field, the anisotropy, and the critical current density. The results are discussed in detail by comparing them with the properties in the unirradiated state.
△ Less
Submitted 30 November, 2009;
originally announced November 2009.
-
Critical currents in weakly textured MgB2: Nonlinear transport in anisotropic heterogeneous media
Authors:
M. Eisterer,
W. Hassler,
P. Kovac
Abstract:
A model for highly non-linear transport in heterogeneous media consisting of anisotropic particles with a preferred orientation is proposed and applied to the current transport in weakly textured magnesium diboride, MgB2. It essentially explains why, unlike in conventional superconductors, a significant macroscopic anisotropy of the critical currents can be induced by the preparation of MgB2 tap…
▽ More
A model for highly non-linear transport in heterogeneous media consisting of anisotropic particles with a preferred orientation is proposed and applied to the current transport in weakly textured magnesium diboride, MgB2. It essentially explains why, unlike in conventional superconductors, a significant macroscopic anisotropy of the critical currents can be induced by the preparation of MgB2 tapes. The field and angular dependence of the critical current is calculated for various degrees of texture and compared to experimental data.
△ Less
Submitted 29 October, 2009;
originally announced October 2009.
-
Consequences of the peculiar intrinsic properties of MgB2 on its macroscopic current flow
Authors:
M. Eisterer,
H. W. Weber
Abstract:
The influence of two important features of magnesium diboride on the macroscopic transport properties of polycrystalline MgB2 is discussed in the framework of a percolation model. While two band superconductivity does not have significant consequences in the field and temperature range of possible power applications, the opposite is true for the anisotropy of the upper critical field. The field…
▽ More
The influence of two important features of magnesium diboride on the macroscopic transport properties of polycrystalline MgB2 is discussed in the framework of a percolation model. While two band superconductivity does not have significant consequences in the field and temperature range of possible power applications, the opposite is true for the anisotropy of the upper critical field. The field dependence of the critical current densities strongly increases and the macroscopic supercurrents disappear well below the apparent upper critical field. The common scaling laws for the field dependence of the volume pinning force are altered and Kramer's plot is no longer linear, although grain boundary pinning dominates in nearly all polycrystalline MgB2 conductors. In contrast to the conventional superconductors NbTi and Nb3Sn, a significant critical current anisotropy can be induced by the preparation technique of MgB2 tapes.
△ Less
Submitted 22 October, 2009;
originally announced October 2009.
-
Neutron irradiation of coated conductors
Authors:
M. Eisterer,
R. Fuger,
M. Chudy,
F. Hengstberger,
H. W. Weber
Abstract:
Various commercial coated conductors were irradiated with fast neutrons in order to introduce randomly distributed, uncorrelated defects which increase the critical current density, Jc, in a wide temperature and field range. The Jc-anisotropy is significantly reduced and the angular dependence of Jc does not obey the anisotropic scaling approach. These defects enhance the irreversibility line in…
▽ More
Various commercial coated conductors were irradiated with fast neutrons in order to introduce randomly distributed, uncorrelated defects which increase the critical current density, Jc, in a wide temperature and field range. The Jc-anisotropy is significantly reduced and the angular dependence of Jc does not obey the anisotropic scaling approach. These defects enhance the irreversibility line in not fully optimized tapes, but they do not in state-of-the-art conductors. Neutron irradiation provides a clear distinction between the low field region, where Jc is limited by the grain boundaries, and the high field region, where depinning leads to dissipation.
△ Less
Submitted 28 August, 2009;
originally announced August 2009.
-
Disorder effects on the superconducting properties of BaFe$_{1.8}$Co$_{0.2}$As$_2$ single crystals
Authors:
M. Eisterer,
M. Zehetmayer,
H. W. Weber,
J. Jiang,
J. D. Weiss,
A. Yamamoto,
E. E. Hellstrom
Abstract:
Single crystals of superconducting BaFe$_{1.8}$Co$_{0.2}$As$_2$ were exposed to neutron irradiation in a fission reactor. The introduced defects decrease the superconducting transition temperature (by about 0.3 K) and the upper critical field anisotropy (e.g. from 2.8 to 2.5 at 22 K) and enhance the critical current densities by a factor of up to about 3. These changes are discussed in the conte…
▽ More
Single crystals of superconducting BaFe$_{1.8}$Co$_{0.2}$As$_2$ were exposed to neutron irradiation in a fission reactor. The introduced defects decrease the superconducting transition temperature (by about 0.3 K) and the upper critical field anisotropy (e.g. from 2.8 to 2.5 at 22 K) and enhance the critical current densities by a factor of up to about 3. These changes are discussed in the context of similar experiments on other superconducting materials.
△ Less
Submitted 17 July, 2009;
originally announced July 2009.
-
Neutron Irradiation of Sm-1111
Authors:
M. Eisterer,
H. W. Weber,
J. Jiang,
J. D. Weiss,
A. Yamamoto,
A. A. Polyanskii,
E. E. Hellstrom,
D. C. Larbalestier
Abstract:
SmFeAsO$_{1-x}$F$_x$ was irradiated in a fission reactor to a fast (E > 0.1 MeV) neutron fluence of 4x10^${21}$ m$^{-2}$. The introduced defects increase the normal state resistivity due to a reduction in the mean free path of the charge carriers. This leads to an enhancement of the upper critical field at low temperatures. The critical current density within the grains, Jc, increases upon irrad…
▽ More
SmFeAsO$_{1-x}$F$_x$ was irradiated in a fission reactor to a fast (E > 0.1 MeV) neutron fluence of 4x10^${21}$ m$^{-2}$. The introduced defects increase the normal state resistivity due to a reduction in the mean free path of the charge carriers. This leads to an enhancement of the upper critical field at low temperatures. The critical current density within the grains, Jc, increases upon irradiation. The second maximum in the field dependence of Jc disappears and the critical current density becomes a monotonically decreasing function of the applied magnetic field.
△ Less
Submitted 16 April, 2009;
originally announced April 2009.
-
Assessing the spatial and field dependence of the critical current density in YBCO bulk superconductors by scanning Hall probes
Authors:
F. Hengstberger,
M. Eisterer,
M. Zehetmayer,
H. W. Weber
Abstract:
Although the flux density map of a bulk superconductor provides in principle sufficient information for calculating the magnitude and the direction of the supercurrent flow, the inversion of the Biot-Savart law is ill conditioned for thick samples, thus rendering this method unsuitable for state of the art bulk superconductors. If a thin (< 1 mm) slab is cut from the bulk, the inversion is reaso…
▽ More
Although the flux density map of a bulk superconductor provides in principle sufficient information for calculating the magnitude and the direction of the supercurrent flow, the inversion of the Biot-Savart law is ill conditioned for thick samples, thus rendering this method unsuitable for state of the art bulk superconductors. If a thin (< 1 mm) slab is cut from the bulk, the inversion is reasonably well conditioned and the variation of the critical current density in the sample can be calculated with adequate spatial resolution. Therefore a novel procedure is employed, which exploits the symmetry of the problem and solves the equations non-iteratively, assuming a planar z-independent current density. The calculated current density at a certain position is found to depend on the magnetic induction. In this way the average field dependence of the critical current density Jc(B) is obtained also at low fields, which is not accessible to magnetisation measurements due to the self-field of the sample. It is further shown that an evaluation of magnetisation loops, taking the self-field into account, results in a similar dependence in the field range accessible to this experiment.
△ Less
Submitted 26 November, 2008;
originally announced November 2008.
-
Connectivity and Critical Currents in Polycrystalline MgB2
Authors:
M. Eisterer,
J. Emhofer,
S. Sorta,
M. Zehetmayer,
H. W. Weber
Abstract:
Current transport in polycrystalline magnesium diboride is highly non-uniform (percolative) due to the presence of secondary phases and also due to the intrinsic anisotropy of the material. The influence of secondary phases on the transport properties of MgB2 was investigated. Bulk samples were prepared from a mixture of MgB2 and MgO powders by the ex-situ technique in order to vary the MgO cont…
▽ More
Current transport in polycrystalline magnesium diboride is highly non-uniform (percolative) due to the presence of secondary phases and also due to the intrinsic anisotropy of the material. The influence of secondary phases on the transport properties of MgB2 was investigated. Bulk samples were prepared from a mixture of MgB2 and MgO powders by the ex-situ technique in order to vary the MgO content systematically. The samples were characterized by resistive and magnetization measurements. The reduced MgB2 fraction is modeled by a reduced effective cross section (connectivity), which was assessed directly by the experiments. The presence of MgO also increases the percolation threshold, which reduces the zero resistivity (or irreversibility) field.
△ Less
Submitted 6 November, 2008;
originally announced November 2008.
-
Application prospects of MgB$_2$ in view of its basic properties
Authors:
M. Eisterer,
H. W. Weber
Abstract:
Seven years after the discovery of superconductivity in magnesium diboride, the fundamental superconducting properties of this compound are well known and the peculiar current transport in polycrystalline materials is essentially understood. Based on this knowledge the ultimate performance of wires or tapes at high magnetic fields will be predicted and compared to state-of-the-art materials and…
▽ More
Seven years after the discovery of superconductivity in magnesium diboride, the fundamental superconducting properties of this compound are well known and the peculiar current transport in polycrystalline materials is essentially understood. Based on this knowledge the ultimate performance of wires or tapes at high magnetic fields will be predicted and compared to state-of-the-art materials and to other superconductors. The key parameter for high field applications is the upper critical field, which can be strongly enhanced by impurity scattering. This fundamental property might be further optimized in bulk materials, since higher values were reported for thin films. The MgB$_2$ grains are usually very small, if prepared by the in-situ technique. The resulting high density of grain boundaries leads to strong pinning, close to the theoretical limit. On the other hand, the connectivity between the grains is still rather poor and strongly reduces the achievable critical currents, thus leaving room for further improvements.
△ Less
Submitted 31 October, 2008;
originally announced October 2008.
-
Influence of the upper critical field anisotropy on the transport properties of polycrystalline MgB$_{2}$
Authors:
M. Eisterer,
C. Krutzler,
H. W. Weber
Abstract:
The intrinsic properties of MgB$_2$ form the basis for all applications of this superconductor. We wish to emphasize that the application range of polycrystalline MgB$_2$ is limited by the upper critical field H$_{c2}$ and its anisotropy. In wires or tapes, the MgB$_2$ grains are randomly oriented or only slightly textured and the anisotropy of the upper critical field leads to different transpo…
▽ More
The intrinsic properties of MgB$_2$ form the basis for all applications of this superconductor. We wish to emphasize that the application range of polycrystalline MgB$_2$ is limited by the upper critical field H$_{c2}$ and its anisotropy. In wires or tapes, the MgB$_2$ grains are randomly oriented or only slightly textured and the anisotropy of the upper critical field leads to different transport properties in different grains, if a magnetic field is applied and the current transport becomes percolative. The irreversibility line is caused by the disappearance of a continuous superconducting current path and not by depinning as in high temperature superconductors. Based on a percolation model, we demonstrate how changes of the upper critical field and its anisotropy and how changes of flux pinning will influence the critical currents of a wire or a tape. These predictions are compared to results of neutron irradiation experiments, where these parameters were changed systematically.
△ Less
Submitted 22 June, 2005;
originally announced June 2005.
-
Significance of solutions of the inverse Biot-Savart problem in thick superconductors
Authors:
M. Eisterer
Abstract:
The evaluation of current distributions in thick superconductors from field profiles near the sample surface is investigated theoretically. A simple model of a cylindrical sample, in which only circular currents are flowing, reduces the inversion to a linear least squares problem, which is analyzed by singular value decomposition. Without additional assumptions about the current distribution (e.…
▽ More
The evaluation of current distributions in thick superconductors from field profiles near the sample surface is investigated theoretically. A simple model of a cylindrical sample, in which only circular currents are flowing, reduces the inversion to a linear least squares problem, which is analyzed by singular value decomposition. Without additional assumptions about the current distribution (e.g. constant current over the sample thickness), the condition of the problem is very bad, leading to unrealistic results. However, any additional assumption strongly influences the solution and thus renders the solutions again questionable. These difficulties are unfortunately inherent to the inverse Biot-Savart problem in thick superconductors and cannot be avoided by any models or algorithms.
△ Less
Submitted 25 October, 2004;
originally announced October 2004.
-
Influence of disorder on Hc2-anisotropy and flux pinning in MgB2
Authors:
M. Eisterer
Abstract:
The upper critical field and flux pinning in MgB2 single crystals were investigated. The implications of these properties for technical applications are discussed and compared with transport properties of polycrystalline bulk samples and wires. In these untextured materials current percolation is important, especially at high magnetic fields. It is shown that the anisotropy of the upper critical…
▽ More
The upper critical field and flux pinning in MgB2 single crystals were investigated. The implications of these properties for technical applications are discussed and compared with transport properties of polycrystalline bulk samples and wires. In these untextured materials current percolation is important, especially at high magnetic fields. It is shown that the anisotropy of the upper critical field influences the "irreversibility line" and that the application range of MgB2 is limited by the smallest upper critical field (i.e., for the field direction perpendicular to the boron planes). Disorder, introduced by irradiation with neutrons, enhances the upper critical field, reduces the anisotropy and drastically changes flux pinning. While the enhanced Hc2 and the reduced anisotropy generally improve the transport properties of the polycrystalline samples, the contribution of the radiation-induced defects to flux pinning is small compared to the as-grown defect structure (grain boundary pinning).
△ Less
Submitted 22 October, 2004;
originally announced October 2004.
-
"Magnetoscan": A Modified Hall Probe Scanning Technique for the Detection of Inhomogeneities in Bulk High Temperature Superconductors
Authors:
M. Eisterer,
S. Haindl,
T. Wojcik,
H. W. Weber
Abstract:
We present a novel technique for the investigation of local variations of the critical current density in large bulk superconductors. In contrast to the usual Hall probe scanning technique, the sample is not magnetized as a whole before the scan, but locally by a small permanent magnet, which is fixed near the Hall probe, during the scanning process. The resulting signal can be interpreted as a…
▽ More
We present a novel technique for the investigation of local variations of the critical current density in large bulk superconductors. In contrast to the usual Hall probe scanning technique, the sample is not magnetized as a whole before the scan, but locally by a small permanent magnet, which is fixed near the Hall probe, during the scanning process. The resulting signal can be interpreted as a qualitative measure of the local shielding currents flowing at the surface.
△ Less
Submitted 9 October, 2003; v1 submitted 8 May, 2003;
originally announced May 2003.
-
Current percolation and anisotropy in polycrystalline MgB$_2$
Authors:
M. Eisterer,
M. Zehetmayer,
H. W. Weber
Abstract:
The influence of anisotropy on the transport current in MgB$_2$ polycrystalline bulk samples and wires is discussed. A model for the critical current density is proposed, which is based on anisotropic London theory, grain boundary pinning and percolation theory. The calculated currents agree convincingly with experimental data and the fit parameters, especially the anisotropy, obtained from perc…
▽ More
The influence of anisotropy on the transport current in MgB$_2$ polycrystalline bulk samples and wires is discussed. A model for the critical current density is proposed, which is based on anisotropic London theory, grain boundary pinning and percolation theory. The calculated currents agree convincingly with experimental data and the fit parameters, especially the anisotropy, obtained from percolation theory agree with experiment or theoretical predictions.
△ Less
Submitted 8 May, 2003;
originally announced May 2003.
-
Unusual effects of anisotropy on the specific heat of ceramic and single crystal MgB2
Authors:
F. Bouquet,
Y. Wang,
I. Sheikin,
P. Toulemonde,
M. Eisterer,
H. W. Weber,
S. Lee,
S. Tajima,
A. Junod
Abstract:
The two-gap structure in the superconducting state of MgB_2 gives rise to unusual thermodynamic properties which depart markedly from the isotropic single-band BCS model, both in their temperature- and field dependence. We report and discuss measurements of the specific heat up to 16 T on ceramic, and up to 14 T on single crystal samples, which demonstrate these effects in the bulk. The behavior…
▽ More
The two-gap structure in the superconducting state of MgB_2 gives rise to unusual thermodynamic properties which depart markedly from the isotropic single-band BCS model, both in their temperature- and field dependence. We report and discuss measurements of the specific heat up to 16 T on ceramic, and up to 14 T on single crystal samples, which demonstrate these effects in the bulk. The behavior in zero field is described in terms of two characteristic temperatures, a crossover temperature Tc_pi ~ 13 K, and a critical temperature Tc = Tc_sigma ~ 38 K, whereas the mixed-state specific heat requires three characteristic fields, an isotropic crossover field Hc2_pi ~ 0.35 T, and an anisotropic upper critical field with extreme values Hc2_sigma_c ~ 3.5 T and Hc2_sigma_ab ~ 19 T, where the indexes πand σrefer to the 3D and 2D sheets of the Fermi surface. Irradiation-induced interband scattering tends to move the gaps toward a common value, and increases the upper critical field up to ~ 28 T when Tc = 30 K.
△ Less
Submitted 31 October, 2002;
originally announced October 2002.
-
Specific heat of MgB_2 after irradiation
Authors:
Yuxing Wang,
Frederic Bouquet,
Ilya Sheikin,
Pierre Toulemonde,
Bernard Revaz,
Michael Eisterer,
Harald W. Weber,
Joerg Hinderer,
Alain Junod
Abstract:
We studied the effect of disorder on the superconducting properties of polycrystalline MgB_2 by specific-heat measurements. In the pristine state, these measurements give a bulk confirmation of the presence of two superconducting gaps with 2 Delta 0 / k_B T_c = 1.3 and 3.9 with nearly equal weights. The scattering introduced by irradiation suppresses T_c and tends to average the two gaps althoug…
▽ More
We studied the effect of disorder on the superconducting properties of polycrystalline MgB_2 by specific-heat measurements. In the pristine state, these measurements give a bulk confirmation of the presence of two superconducting gaps with 2 Delta 0 / k_B T_c = 1.3 and 3.9 with nearly equal weights. The scattering introduced by irradiation suppresses T_c and tends to average the two gaps although less than predicted by theory. We also found that by a suitable irradiation process by fast neutrons, a substantial bulk increase of dH_{c2}/dT at T_c can be obtained without sacrificing more than a few degrees in T_c. The upper critical field of the sample after irradiation exceeds 28 T at T goes to 0 K.
△ Less
Submitted 7 January, 2003; v1 submitted 8 August, 2002;
originally announced August 2002.
-
Mixed state properties of superconducting MgB2 single crystals
Authors:
M. Zehetmayer,
M. Eisterer,
H. W. Weber,
J. Jun,
S. M. Kazakov,
J. Karpinski,
A. Wisniewski
Abstract:
We report on measurements of the magnetic moment in superconducting MgB2 single crystals. We find μ_0H_{c2}^c(0) = 3.2 T, μ_0H_{c2}^{ab}(0) = 14.5 T, γ= 4.6, μ_0H_c(0) = 0.28 T, and κ(T_c) = 4.7. The standard Ginzburg-Landau and London model relations lead to a consistent data set and indicate that MgB2 is a clean limit superconductor of intermediate coupling strength with very pronounced anisot…
▽ More
We report on measurements of the magnetic moment in superconducting MgB2 single crystals. We find μ_0H_{c2}^c(0) = 3.2 T, μ_0H_{c2}^{ab}(0) = 14.5 T, γ= 4.6, μ_0H_c(0) = 0.28 T, and κ(T_c) = 4.7. The standard Ginzburg-Landau and London model relations lead to a consistent data set and indicate that MgB2 is a clean limit superconductor of intermediate coupling strength with very pronounced anisotropy effects.
△ Less
Submitted 9 April, 2002;
originally announced April 2002.
-
Neutron Irradiation of MgB2 Bulk Superconductors
Authors:
M. Eisterer,
M. Zehetmayer,
S. Toenies,
H. W. Weber,
M. Kambara,
N. Hari Babu,
D. A. Cardwell,
L. R. Greenwood
Abstract:
Sintered samples of MgB2 were irradiated in a fission reactor. Defects in the bulk microstructure are produced during this process mainly by the 10B(n,a)7Li reaction while collisions of fast neutrons with the lattice atoms induce much less damage. Self-shielding effects turn out to be very important and lead to a highly inhomogeneous defect distribution in the irradiated samples. The resulting d…
▽ More
Sintered samples of MgB2 were irradiated in a fission reactor. Defects in the bulk microstructure are produced during this process mainly by the 10B(n,a)7Li reaction while collisions of fast neutrons with the lattice atoms induce much less damage. Self-shielding effects turn out to be very important and lead to a highly inhomogeneous defect distribution in the irradiated samples. The resulting disorder enhances the normal state resistivity and the upper critical field. The irreversibility line shifts to higher fields at low temperatures and the measured critical current densities increase following irradiation.
△ Less
Submitted 7 December, 2001;
originally announced December 2001.
