-
A consistent derivation of soil stiffness from elastic wave speeds
Authors:
David M. Riley,
Itai Einav,
François Guillard
Abstract:
Elastic wave speeds are fundamental in geomechanics and have historically been described by an analytic formula that assumes linearly elastic solid medium. Empirical relations stemming from this assumption were used to determine nonlinearly elastic stiffness relations that depend on pressure, density, and other state variables. Evidently, this approach introduces a mathematical and physical discon…
▽ More
Elastic wave speeds are fundamental in geomechanics and have historically been described by an analytic formula that assumes linearly elastic solid medium. Empirical relations stemming from this assumption were used to determine nonlinearly elastic stiffness relations that depend on pressure, density, and other state variables. Evidently, this approach introduces a mathematical and physical disconnect between the derivation of the analytical wave speed (and thus stiffness) and the empirically generated stiffness constants. In our study, we derive wave speeds for energy-conserving (hyperelastic) and non-energy-conserving (hypoelastic) constitutive models that have a general dependence on pressure and density. Under isotropic compression states, the analytical solutions for both models converge to previously documented empirical relations. Conversely, in the presence of shear, hyperelasticity predicts changes in the longitudinal and transverse wave speed ratio. This prediction arises from terms that ensure energy conservation in the hyperelastic model, without needing fabric to predict such an evolution, as was sometimes assumed in previous investigations. Such insights from hyperelasticity could explain the previously unaccounted-for evolution of longitudinal wave speeds in oedometric compression. Finally, the procedure used herein is general and could be extended to account for other relevant state variables of soils, such as grain-size, grain-shape, or saturation.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
Neural integration for constitutive equations using small data
Authors:
Filippo Masi,
Itai Einav
Abstract:
Data-driven models based on deep learning algorithms intend to overcome the limitations of traditional constitutive modelling by directly learning from data. However, the need for extensive data that collate the full state of the material is hindered by traditional experimental observations, which typically provide only small data - sparse and partial material state observations. To address this i…
▽ More
Data-driven models based on deep learning algorithms intend to overcome the limitations of traditional constitutive modelling by directly learning from data. However, the need for extensive data that collate the full state of the material is hindered by traditional experimental observations, which typically provide only small data - sparse and partial material state observations. To address this issue, we develop a novel deep learning algorithm referred to as Neural Integration for Constitutive Equations to discover constitutive models at the material point level from scarce and incomplete observations. It builds upon the solution of the initial value problem describing the time evolution of the material state, unlike the majority of data-driven approaches for constitutive modelling that require large data of increments of state variables. Numerical benchmarks demonstrate that the method can learn accurate, consistent, and robust constitutive models from incomplete, sparse, and noisy data collecting simple conventional experimental protocols.
△ Less
Submitted 21 December, 2023; v1 submitted 13 November, 2023;
originally announced November 2023.
-
A Thermodynamic Treatment\\ of Partially Saturated Soils \\ Revealing the Structure of Effective Stress
Authors:
Yimin Jiang,
Itai Einav,
Mario Liu
Abstract:
A rigorous thermodynamic treatment of partially saturated soils is developed using a minimal number of assumptions. The derivation is carried out in a way that does not require to explicitly track the complex shapes of interfaces between the solid, fluid and gas domains. Instead, suction is the property being recovered explicitly through the minimisation of energy around an ideal `suctionless limi…
▽ More
A rigorous thermodynamic treatment of partially saturated soils is developed using a minimal number of assumptions. The derivation is carried out in a way that does not require to explicitly track the complex shapes of interfaces between the solid, fluid and gas domains. Instead, suction is the property being recovered explicitly through the minimisation of energy around an ideal `suctionless limit', while considering the different compressibilities of the three domains. In interpreting experimental data the derivation ensures the thermodynamic equilibrium between the chemical potentials of the soil and measurement cells, while carefully distinguishing intrinsic from measured pressures and suctions. A most general expression for the effective stress of partially saturated soils is then derived that is strictly linked to the soil-water retention curve (SWRC). The structure of the effective stress broadly depends on the three thermodynamic densities characterising the solid, fluid and gas domains. Special cases of SWRC are explored, which reveals conditions for which the structure of the effective stress may agree with previously proposed empirical relationships.
△ Less
Submitted 17 December, 2022;
originally announced December 2022.
-
Static friction at fractal interfaces
Authors:
Dorian Hanaor,
Yixiang Gan,
Itai Einav
Abstract:
Tribological phenomena are governed by combined effects of material properties, topology and surface-chemistry. We study the interplay of multiscale surface structures with molecular-scale interactions towards interpreting static frictional interactions at fractal interfaces. By spline-assisted-discretization we analyse asperity interactions in pairs of contacting fractal surface-profiles. For ela…
▽ More
Tribological phenomena are governed by combined effects of material properties, topology and surface-chemistry. We study the interplay of multiscale surface structures with molecular-scale interactions towards interpreting static frictional interactions at fractal interfaces. By spline-assisted-discretization we analyse asperity interactions in pairs of contacting fractal surface-profiles. For elastically deforming asperities, force analysis reveals greater friction at surfaces exhibiting higher fractality, with increasing molecular-scale friction amplifying this trend. Increasing adhesive strength yields higher overall friction at surfaces of lower fractality owing to greater true-contact-area. In systems where adhesive-type interactions play an important role, such as those where cold-welded junctions form, friction is minimised at an intermediate value of surface profile fractality found to be around 1.3 to 1.5. Results have implications for systems exhibiting evolving surface structures.
△ Less
Submitted 2 June, 2021;
originally announced June 2021.
-
Contact mechanics of fractal surfaces by spline assisted discretisation
Authors:
Dorian Hanaor,
Yixiang Gan,
Itai Einav
Abstract:
We present a newly developed approach for the calculation of interfacial stiffness and contact area evolution between two rough bodies exhibiting self affine surface structures. Using spline assisted discretization to define localised contact normals and surface curvatures we interpret the mechanics of simulated non-adhesive elastic surface-profiles subjected to normal loading by examining discret…
▽ More
We present a newly developed approach for the calculation of interfacial stiffness and contact area evolution between two rough bodies exhibiting self affine surface structures. Using spline assisted discretization to define localised contact normals and surface curvatures we interpret the mechanics of simulated non-adhesive elastic surface-profiles subjected to normal loading by examining discrete contact points as projected Hertzian spheres. The analysis of rough-to-rough contact mechanics for surface profiles exhibiting fractal structures, with fractal dimensions in the regime 1 2, reveals the significant effect of surface fractality on contact mechanics and compliance with surfaces having the same mean roughness but higher fractality showing lower contact stiffness in conditions of initial contact for a given load. The predicted linear development of true contact area with load was found to be consistent with diverse existing numerical and experimental studies. Results from this model demonstrate the applicability of the developed method for the meaningful contact analysis of hierarchical structures with implications for modelling tribological interactions between pairs of rough surfaces
△ Less
Submitted 2 June, 2021;
originally announced June 2021.
-
The impact of clogging on the transfer dynamics of hydraulic networks
Authors:
D. S. Griffani,
P. Rognon,
I. Einav
Abstract:
We investigate how clogging affects the transfer properties of a generic class of materials featuring a hydraulic network embedded in a matrix. We consider the flow of a liquid through fully saturated hydraulic networks which transfer heat (or mass) by advection and diffusion, and a matrix in which only diffusion operates. Networks are subjected to different clogging scenarios (or attacks), changi…
▽ More
We investigate how clogging affects the transfer properties of a generic class of materials featuring a hydraulic network embedded in a matrix. We consider the flow of a liquid through fully saturated hydraulic networks which transfer heat (or mass) by advection and diffusion, and a matrix in which only diffusion operates. Networks are subjected to different clogging scenarios (or attacks), changing their microstructure and flow field. A series of canonical cooling tests are simulated using a tracer method prior to and following attack. Results quantify the threat posed by different types and degrees of attack to a system's transfer properties. An analytical framework is introduced to predict this vulnerability to attacks, rationalised in terms of their effect on the physical mechanisms underlying the transfer dynamics.
△ Less
Submitted 29 March, 2018;
originally announced April 2018.
-
Effects of surface structure deformation on static friction at fractal interfaces
Authors:
Dorian A H Hanaor,
Yixiang Gan,
Itai Einav
Abstract:
The evolution of fractal surface structures with flattening of asperities was investigated using isotropically roughened aluminium surfaces loaded in compression. It was found that asperity amplitude, mean roughness and fractal dimension decrease through increased compressive stress and number of loading events. Of the samples tested, surfaces subjected to an increased number of loading events exh…
▽ More
The evolution of fractal surface structures with flattening of asperities was investigated using isotropically roughened aluminium surfaces loaded in compression. It was found that asperity amplitude, mean roughness and fractal dimension decrease through increased compressive stress and number of loading events. Of the samples tested, surfaces subjected to an increased number of loading events exhibited the most significant surface deformation and were observed to exhibit higher levels of static friction at an interface with a single crystal flat quartz substrate. This suggests that the frequency of grain reorganisation events in geomaterials plays an important role in the development of intergranular friction. Fractal surfaces were numerically modelled using Weierstrass- Mandelbrot based functions. From the study of frictional interactions with rigid flat opposing surfaces it was apparent that the effect of surface fractal dimension is more significant with increasing dominance of adhesive mechanisms.
△ Less
Submitted 21 August, 2013;
originally announced August 2013.
-
A Particle-Water Based Model for Water Retention Hysteresis
Authors:
Yixiang Gan,
Federico Maggi,
Giuseppe Buscarnera,
Itai Einav
Abstract:
A particle-water discrete element based approach to describe water movement in partially saturated granular media is presented and tested. Water potential is governed by both capillary bridges, dominant at low saturations, and the pressure of entrapped air, dominant at high saturations. The approach captures the hysteresis of water retention during wetting and drainage by introducing the local evo…
▽ More
A particle-water discrete element based approach to describe water movement in partially saturated granular media is presented and tested. Water potential is governed by both capillary bridges, dominant at low saturations, and the pressure of entrapped air, dominant at high saturations. The approach captures the hysteresis of water retention during wetting and drainage by introducing the local evolution of liquid-solid contact angles at the level of pores and grains. Extensive comparisons against experimental data are presented. While these are made without the involvement of any fitting parameters, the method demonstrates relative high success by achieving a correlation coefficient of at least 82%, and mostly above 90%. For the tested materials with relatively mono-disperse grain size, the hysteresis of water retention during cycles of wetting and drainage has been shown to arise from the dynamics of solid-liquid contact angles as a function of local liquid volume changes.
△ Less
Submitted 4 December, 2013; v1 submitted 20 July, 2013;
originally announced July 2013.
-
The interactions between comminution, segregation and remixing in granular flows
Authors:
Benjy Marks,
Itai Einav
Abstract:
Granular segregation is an important mechanism for industrial processes aiming at mixing grains. Additionally, it plays a pivotal role in determining the kinematics of geophysical flows. Because of segregation, the grainsize distribution varies in space and time. Additional complications arise from the presence of comminution, where new particles are created, enhancing segregation. This has a feed…
▽ More
Granular segregation is an important mechanism for industrial processes aiming at mixing grains. Additionally, it plays a pivotal role in determining the kinematics of geophysical flows. Because of segregation, the grainsize distribution varies in space and time. Additional complications arise from the presence of comminution, where new particles are created, enhancing segregation. This has a feedback on the comminution process, as particles change their local neighbourhood. Simultaneously, particles are generally undergoing remixing, further complicating the segregation and comminution processes. The interaction between these mechanisms is explored using a cellular automaton with three rules: one for each of segregation, comminution and mixing. The interplay between these rules creates complex patterns, as seen in segregating systems, and depth dependent grading curves, which have been observed in avalanche runout. At every depth, log-normal grading curves are produced at steady state, as measured experimentally in avalanche and debris flow deposits.
△ Less
Submitted 16 April, 2013;
originally announced April 2013.
-
Internal relaxation time in immersed particulate materials
Authors:
P. Rognon,
I. Einav,
C. Gay
Abstract:
We study the dynamics of the solid to liquid transition for a model material made of elastic particles immersed in a viscous fluid. The interaction between particle surfaces includes their viscous lubrication, a sharp repulsion when they get closer than a tuned steric length and their elastic deflection induced by those two forces. We use Soft Dynamics to simulate the dynamics of this material w…
▽ More
We study the dynamics of the solid to liquid transition for a model material made of elastic particles immersed in a viscous fluid. The interaction between particle surfaces includes their viscous lubrication, a sharp repulsion when they get closer than a tuned steric length and their elastic deflection induced by those two forces. We use Soft Dynamics to simulate the dynamics of this material when it experiences a step increase in the shear stress and a constant normal stress. We observe a long creep phase before a substantial flow eventually establishes. We find that the typical creep time relies on an internal relaxation process, namely the separation of two particles driven by the applied stress and resisted by the viscous friction. This mechanism should be relevant for granular pastes, living cells, emulsions and wet foams.
△ Less
Submitted 12 November, 2009;
originally announced November 2009.
