Showing 1–19 of 19 results for author: Ehrler, B

Accelerated hot-carrier cooling in MAPbI3 perovskite by pressure-induced lattice compression

Authors: Loreta A. Muscarella, Eline M. Hutter, Jarvist M. Frost, Gianluca G. Grimaldi, Jan Versluis, Huib J. Bakker, Bruno Ehrler

Abstract: Hot-carrier cooling (HCC) in metal halide perovskites in the high-density regime is significantly slower compared to conventional semiconductors. This effect is commonly attributed to a hot-phonon bottleneck but the influence of the lattice properties on the HCC behaviour is poorly understood. Using pressure-dependent transient absorption spectroscopy (fs-TAS) we find that at an excitation density… ▽ More Hot-carrier cooling (HCC) in metal halide perovskites in the high-density regime is significantly slower compared to conventional semiconductors. This effect is commonly attributed to a hot-phonon bottleneck but the influence of the lattice properties on the HCC behaviour is poorly understood. Using pressure-dependent transient absorption spectroscopy (fs-TAS) we find that at an excitation density below Mott transition, pressure does not affect the HCC. On the contrary, above Mott transition, HCC in methylammonium lead iodide (MAPbI3) is around two times as fast at 0.3 GPa compared to ambient pressure. Our electron-phonon coupling calculations reveal about two times stronger electron-phonon coupling for the inorganic cage mode at 0.3 GPa. However, our experiments reveal that pressure promotes faster HCC only above Mott transition. Altogether, these findings suggest a change in the nature of excited carriers in the high-density regime, providing insights on the electronic behavior of devices operating at such high charge-carrier density. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Metal halide perovskite toxicity effects on plants are caused by iodide ions

Authors: Eline M. Hutter, Reiny Sangster, Christa Testerink, Bruno Ehrler, Charlotte M. M. Gommers

Abstract: Highly-efficient solar cells containing lead halide perovskites are expected to revolutionize sustainable energy production in the coming years. Combining these next-generation solar panels with agriculture, can optimize land-use, but brings new risks in case of leakage into the soil. Perovskites are generally assumed to be toxic because of the lead (Pb), but experimental evidence to support this… ▽ More Highly-efficient solar cells containing lead halide perovskites are expected to revolutionize sustainable energy production in the coming years. Combining these next-generation solar panels with agriculture, can optimize land-use, but brings new risks in case of leakage into the soil. Perovskites are generally assumed to be toxic because of the lead (Pb), but experimental evidence to support this prediction is scarce. We used Arabidopsis thaliana to test the toxicity of the lead-based perovskite MAPbI3 (MA = CH3NH3) and several of its precursors in plants. Our results show that MAPbI3 severely hampers plant growth at concentrations above 5 microM. Surprisingly, we find that the precursors MAI is equally toxic, while lead-based precursors without iodide are only toxic above 500 microM. These observations reveal that perovskite toxicity at low concentrations is caused by iodide ions specifically, and contrast the widespread idea that lead is the most harmful component. We calculate that iodide toxicity thresholds are likely to reach in the soil upon perovskite leakage, but much less so for lead toxicity thresholds. Hence, this work stresses the importance to further understand and predict harmful effects of iodide-containing perovskites in the environment. △ Less

Submitted 11 December, 2020; originally announced December 2020.

Sequentially Deposited versus Conventional Nonfullerene Organic Solar Cells: Interfacial Trap States, Vertical Stratification, and Exciton Dissociation

Authors: Jiangbin Zhang, Moritz H. Futscher, Vincent Lami, Felix U. Kosasih, Changsoon Cho, Qinying Gu, Aditya Sadhanala, Andrew J. Pearson, Bin Kan, Giorgio Divitini, Xiangjian Wan, Daniel Credgington, Neil C. Greenham, Yongsheng Chen, Caterina Ducati, Bruno Ehrler, Yana Vaynzof, Richard H. Friend, Artem A. Bakulin

Abstract: Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large area and roll-to-toll fabrication. However, the related photophysics at donor-acceptor interface and the vertical heterogeneity of donor-acceptor distribution, cri… ▽ More Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large area and roll-to-toll fabrication. However, the related photophysics at donor-acceptor interface and the vertical heterogeneity of donor-acceptor distribution, critical for exciton dissociation and device performance, are largely unexplored. Herein, steady-state and time-resolved optical and electrical techniques are employed to characterize the interfacial trap states. Correlation with the luminescent efficiency of interfacial states and its non-radiative recombination, interfacial trap states are characterized to be about 50% more populated in the sq-BHJ than as-cast BHJ (c-BHJ), which probably limits the device voltage output. Cross-sectional energy-dispersive X-ray spectroscopy and ultraviolet photoemission spectroscopy depth profiling directly vizualize the donor-acceptor vertical stratification with a precision of 1-2 nm. From the proposed "needle" model, the high exciton dissociation efficiency is rationalized. Our study highlights the promise of sequential deposition to fabricate efficient solar cells, and points towards improving the voltage output and overall device performance via eliminating interfacial trap states. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Journal ref: Adv. Energy Mater. 9 (47), 1902145 (2019)

Change in Tetracene Polymorphism Facilitates Triplet Transfer in Singlet Fission-Sensitized Silicon Solar Cells

Authors: Benjamin Daiber, Sourav Maiti, Silvia Ferro, Joris Bodin, Alyssa F. J. van den Boom, Stefan L. Luxembourg, Sachin Kinge, Sidharam Pujari, Han Zuilhof, Laurens D. A. Siebbeles, Bruno Ehrler

Abstract: Singlet fission in tetracene generates two triplet excitons per absorbed photon. If these triplet excitons can be effectively transferred into silicon (Si) then additional photocurrent can be generated from photons above the bandgap of Si. This could alleviate the thermalization loss and increase the efficiency of conventional Si solar cells. Here we show that a change in the polymorphism of tetra… ▽ More Singlet fission in tetracene generates two triplet excitons per absorbed photon. If these triplet excitons can be effectively transferred into silicon (Si) then additional photocurrent can be generated from photons above the bandgap of Si. This could alleviate the thermalization loss and increase the efficiency of conventional Si solar cells. Here we show that a change in the polymorphism of tetracene deposited on Si due to air exposure, facilitates triplet transfer from tetracene into Si. Magnetic field-dependent photocurrent measurements confirm that triplet excitons contribute to the photocurrent. The decay of tetracene delayed photoluminescence was used to determine a triplet transfer time of 215 ns and a maximum yield of triplet transfer into Si of ~50 %. Our study suggests that control over the morphology of tetracene during deposition will be of great importance to boost the triplet transfer yield further. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Lattice compression increases the activation barrier for phase segregation in mixed-halide perovskites

Authors: Loreta A. Muscarella, Eline M. Hutter, Francesca Wittmann, Young Won Woo, Young-Kwang Jung, Lucie McGovern, Jan Versluis, Aron Walsh, Huib J. Bakker, Bruno Ehrler

Abstract: The bandgap tunability of mixed-halide perovskites makes them promising candidates for light emitting diodes and tandem solar cells. However, illuminating mixed-halide perovskites results in the formation of segregated phases enriched in a single-halide. This segregation occurs through ion migration, which is also observed in single-halide compositions, and whose control is thus essential to enhan… ▽ More The bandgap tunability of mixed-halide perovskites makes them promising candidates for light emitting diodes and tandem solar cells. However, illuminating mixed-halide perovskites results in the formation of segregated phases enriched in a single-halide. This segregation occurs through ion migration, which is also observed in single-halide compositions, and whose control is thus essential to enhance the lifetime and stability. Using pressure-dependent transient absorption spectroscopy, we find that the formation rates of both iodide- and bromide-rich phases in MAPb(BrxI1-x)3 reduce by two orders of magnitude on increasing the pressure to 0.3 GPa. We explain this reduction from a compression-induced increase of the activation energy for halide migration, which is supported by first-principle calculations. A similar mechanism occurs when the unit cell volume is reduced by incorporating a smaller cation. These findings reveal that stability with respect to halide segregation can be achieved either physically through compressive stress or chemically through compositional engineering. △ Less

Submitted 9 July, 2020; originally announced July 2020.

The impact of exciton delocalization on exciton-vibration interactions in organic semiconductors

Authors: Antonios M. Alvertis, Raj Pandya, Loreta A. Muscarella, Nipun Sawhney, Malgorzata Nguyen, Bruno Ehrler, Akshay Rao, Richard H. Friend, Alex W. Chin, Bartomeu Monserrat

Abstract: Organic semiconductors exhibit properties of individual molecules and extended crystals simultaneously. The strongly bound excitons they host are typically described in the molecular limit, but excitons can delocalize over many molecules, raising the question of how important the extended crystalline nature is. Using accurate Green's function based methods for the electronic structure and non-pert… ▽ More Organic semiconductors exhibit properties of individual molecules and extended crystals simultaneously. The strongly bound excitons they host are typically described in the molecular limit, but excitons can delocalize over many molecules, raising the question of how important the extended crystalline nature is. Using accurate Green's function based methods for the electronic structure and non-perturbative finite difference methods for exciton-vibration coupling, we describe exciton interactions with molecular and crystal degrees of freedom concurrently. We find that the degree of exciton delocalization controls these interactions, with thermally activated crystal phonons predominantly coupling to delocalized states, and molecular quantum fluctuations predominantly coupling to localized states. Based on this picture, we quantitatively predict and interpret the temperature and pressure dependence of excitonic peaks in the acene series of organic semiconductors, which we confirm experimentally, and we develop a simple experimental protocol for probing exciton delocalization. Overall, we provide a unified picture of exciton delocalization and vibrational effects in organic semiconductors, reconciling the complementary views of finite molecular clusters and periodic molecular solids. △ Less

Submitted 5 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. B 102, 081122 (2020)

Thermodynamic stabilization of mixed-halide perovskites against phase segregation

Authors: Eline M. Hutter, Loreta A. Muscarella, Francesca Wittmann, Jan Versluis, Lucie McGovern, Huib J. Bakker, Young-Won Woo, Young-Kwang Jung, Aron Walsh, Bruno Ehrler

Abstract: Mixing iodide and bromide in halide perovskite semiconductors is an effective strategy to tune their bandgap, therefore mixed-halide perovskites hold great promise for color-tunable LEDs and tandem solar cells. However, the bandgap of mixed-halide perovskites is unstable under (sun-)light, since the halides segregate into domains of different bandgaps. Using pressure-dependent ultrafast transient… ▽ More Mixing iodide and bromide in halide perovskite semiconductors is an effective strategy to tune their bandgap, therefore mixed-halide perovskites hold great promise for color-tunable LEDs and tandem solar cells. However, the bandgap of mixed-halide perovskites is unstable under (sun-)light, since the halides segregate into domains of different bandgaps. Using pressure-dependent ultrafast transient absorption spectroscopy, we show that high external pressure increases the range of thermodynamically stable halide mixing ratios. Chemical pressure, by inserting a smaller cation, has the same effect, which means that any iodide-to-bromide ratio can be thermodynamically stabilized by tuning the crystal volume and compressibility. We interpret this stabilization by an alteration of the Helmholtz free energy via the largely overlooked PdeltaV term. △ Less

Submitted 9 July, 2020; v1 submitted 15 January, 2020; originally announced January 2020.

Journal ref: Cell Reports Physical Science 1, 100120, 2020

Pitfalls and prospects of optical spectroscopy to characterize perovskite-transport layer interfaces

Authors: Eline M. Hutter, Thomas Kirchartz, Bruno Ehrler, David Cahen, Elizabeth von Hauff

Abstract: Perovskite photovoltaics has witnessed an unprecedented increase in power conversion efficiency over the last decade. The choice of transport layers, through which photo-generated electrons and holes are transported to the electrodes, is a crucial factor for further improving both the device performance and stability. In this perspective, we critically examine the application of optical spectrosco… ▽ More Perovskite photovoltaics has witnessed an unprecedented increase in power conversion efficiency over the last decade. The choice of transport layers, through which photo-generated electrons and holes are transported to the electrodes, is a crucial factor for further improving both the device performance and stability. In this perspective, we critically examine the application of optical spectroscopy to characterize the quality of the transport layer-perovskite interface. We highlight the power of complementary studies that use both continuous wave (cw) and time-resolved photoluminescence (PL) to understand non-radiative losses, and additional transient spectroscopies for characterizing the potential for loss-less carrier extraction at the solar cell interfaces. Based on this discussion, we make recommendations on how to extrapolate results from optical measurements to assess the quality of a transport layer, and its impact on solar cell efficiency. △ Less

Submitted 22 December, 2019; originally announced December 2019.

Journal ref: Applied Physics Letters 116, 100501 (2020)

Quantifying mobile ions in perovskite-based devices with temperature-dependent capacitance measurements: frequency versus time domain

Authors: Moritz H. Futscher, Mahesh K. Gangishetty, Daniel N. Congreve, Bruno Ehrler

Abstract: Perovskites have proven to be a promising candidate for highly-efficient solar cells, light-emitting diodes, and X-ray detectors, overcoming limitations of inorganic semiconductors. However, they are notoriously unstable. The main reason for this instability is the migration of mobile ions through the device during operation, as they are mixed ionic-electronic conductors. Here we show how measurin… ▽ More Perovskites have proven to be a promising candidate for highly-efficient solar cells, light-emitting diodes, and X-ray detectors, overcoming limitations of inorganic semiconductors. However, they are notoriously unstable. The main reason for this instability is the migration of mobile ions through the device during operation, as they are mixed ionic-electronic conductors. Here we show how measuring the capacitance in both the frequency and the time domain can be used to study ionic dynamics within perovskite-based devices, quantifying activation energy, diffusion coefficient, sign of charge, concentration, and the length of the ionic double layer in the vicinity of the interfaces. Measuring the transient of the capacitance furthermore allows for distinguishing between ionic and electronic effects. △ Less

Submitted 21 October, 2019; originally announced October 2019.

Pathways towards 30% efficient single-junction perovskite solar cells and the role of mobile ions

Authors: Jonas Diekmann, Pietro Caprioglio, Moritz H. Futscher, Vincent M. Le Corre, Sebastian Reichert, Frank Jaiser, Malavika Arvind, Lorena Perdigon Toro, Emilio Gutierrez-Partida, Francisco Pena-Camargo, Carsten Deibel, Bruno Ehrler, Thomas Unold, Thomas Kirchartz, Dieter Neher, Martin Stolterfoht

Abstract: Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline silicon cells are not well understood. Here, we establish a simulation model that well describes efficient p-i-n type perovskite solar cells and a range of different… ▽ More Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline silicon cells are not well understood. Here, we establish a simulation model that well describes efficient p-i-n type perovskite solar cells and a range of different experiments. We then study important device and material parameters and we find that an efficiency regime of 30% can be unlocked by optimizing the built-in potential across the perovskite layer by using either highly doped (10^19 cm-3), thick transport layers (TLs) or ultrathin undoped TLs, e.g. self-assembled monolayers. Importantly, we only consider parameters that have been already demonstrated in recent literature, that is a bulk lifetime of 10 us, interfacial recombination velocities of 10 cm/s, a perovskite bandgap of 1.5 eV and an EQE of 95%. A maximum efficiency of 31% is predicted for a bandgap of 1.4 eV. Finally, we demonstrate that the relatively high mobile ion density does not represent a significant barrier to reach this efficiency regime. Thus, the results of this paper promise continuous PCE improvements until perovskites may become the most efficient single-junction solar cell technology in the near future. △ Less

Submitted 25 April, 2021; v1 submitted 16 October, 2019; originally announced October 2019.

Crystal orientation and grain size: do they determine optoelectronic properties of MAPbI3 perovskite?

Authors: Loreta A. Muscarella, Eline M. Hutter, Sandy Sanchez, Christian D. Dieleman, Tom J. Savenije, Anders Hagfeldt, Michael Saliba, Bruno Ehrler

Abstract: It is thought that growing large, oriented grains of perovskite can lead to more efficient devices. We study MAPbI3 films fabricated via Flash Infrared Annealing (FIRA) consisting of highly oriented, large grains. Domains observed in the SEM are often misidentified with crystallographic grains, but SEM images don't provide diffraction information. We measure the grain size, crystal structure and g… ▽ More It is thought that growing large, oriented grains of perovskite can lead to more efficient devices. We study MAPbI3 films fabricated via Flash Infrared Annealing (FIRA) consisting of highly oriented, large grains. Domains observed in the SEM are often misidentified with crystallographic grains, but SEM images don't provide diffraction information. We measure the grain size, crystal structure and grain orientation using Electron Back-Scattered Diffraction (EBSD) and we study how these affect the optoelectronic properties as characterized by local photoluminescence (PL) and time-resolved microwave conductivity measurements (TRMC). We find a spherulitic growth yielding large (tens of micron), highly oriented grains along the (112) and (400) planes in contrast to randomly oriented, smaller (400 nm) grains observed in films fabricated via conventional antisolvent (AS) drip**. We observe a local enhancement and shift of the photoluminescence emission at different regions of the FIRA clusters, but these can be explained with a combination of light-outcoupling and self-absorption. We observe no effect of crystal orientation on the optoelectronic properties. Additionally, despite a substantial difference in grain size between our FIRA sample and a conventional AS sample, we find similar photoluminescence and charge carrier mobilities and lifetime for the two films. These findings show that the optoelectronic quality is not necessarily related to the orientation and size of crystalline domains in perovskite films indicating that fabrication requirements may be more relaxed for perovskites. △ Less

Submitted 17 July, 2019; originally announced July 2019.

Local Crystal Misorientation Influences Non-Radiative Recombination

Authors: Sarthak Jariwala, Hongyu Sun, Gede W. P. Adhyaksa, Andries Lof, Loreta A. Muscarella, Bruno Ehrler, Erik C. Garnett, David S. Ginger

Abstract: We use ultrasensitive electron backscatter diffraction (EBSD) to map the local crystal orientations, grains, and grain boundaries in CH3NH3PbI3 (MAPI) perovskite thin films. Although the true grain structure is broadly consistent with the morphology visible in scanning electron microscopy (SEM), the inverse pole figure maps taken with EBSD reveal grain structure and internal misorientation that is… ▽ More We use ultrasensitive electron backscatter diffraction (EBSD) to map the local crystal orientations, grains, and grain boundaries in CH3NH3PbI3 (MAPI) perovskite thin films. Although the true grain structure is broadly consistent with the morphology visible in scanning electron microscopy (SEM), the inverse pole figure maps taken with EBSD reveal grain structure and internal misorientation that is otherwise hidden. Local crystal misorientation is consistent with the presence of local strain which varies from one grain to the next. We acquire co-aligned confocal optical photoluminescence (PL) microscopy images on the same MAPI samples used for EBSD. We correlate optical and EBSD data, showing that PL is anticorrelated with the local grain orientation spread, suggesting that grains with higher degrees of crystalline orientational heterogeneity (local strain) exhibit more non-radiative recombination. We find that larger grains tend to have larger grain orientation spread, consistent with higher degrees of strain and non-radiative recombination. △ Less

Submitted 11 September, 2019; v1 submitted 26 March, 2019; originally announced March 2019.

The Potential of Singlet Fission Photon Multipliers as an Alternative to Silicon-based Tandem Solar Cells

Authors: Moritz H. Futscher, Akshay Rao, Bruno Ehrler

Abstract: Singlet fission, an exciton multiplication process in organic semiconductors which converts one singlet exciton into two triplet excitons is a promising way to reduce thermalization losses in conventional solar cells. One way to harvest triplet excitons is to transfer their energy into quantum dots, which then emit photons into an underlying solar cell. We simulate the performance potential of suc… ▽ More Singlet fission, an exciton multiplication process in organic semiconductors which converts one singlet exciton into two triplet excitons is a promising way to reduce thermalization losses in conventional solar cells. One way to harvest triplet excitons is to transfer their energy into quantum dots, which then emit photons into an underlying solar cell. We simulate the performance potential of such a singlet fission photon multiplier combined with a silicon base cell and compare it to a silicon-based tandem solar cell. We calculate the influence of various loss-mechanisms on the performance potential under real-world operation conditions using a variety of silicon base cells with different efficiencies. We find that the photon multiplier is more stable against changes in the solar spectrum than two-terminal tandem solar cells. We furthermore find that, as the efficiency of the silicon solar cell increases, the efficiency of the photon multiplier increases at a higher rate than the tandem solar cell. For current record silicon solar cells, the photon multiplier has the potential to increase the efficiency by up to 4.2% absolute. △ Less

Submitted 26 July, 2018; originally announced July 2018.

Enhancing silicon solar cells with singlet fission: the case for Foerster resonant energy transfer using a quantum dot intermediate

Authors: S. W. Tabernig, B. Daiber, T. Wang, B. Ehrler

Abstract: One way for solar cell efficiencies to overcome the Shockley-Queisser limit is downconversion of high-energy photons using singlet fission (SF) in polyacenes like tetracene (Tc). SF enables generation of multiple excitons from the high-energy photons which can be harvested in combination with Si. In this work we investigate the use of lead sulfide quantum dots (PbS QDs) with a band gap close to Si… ▽ More One way for solar cell efficiencies to overcome the Shockley-Queisser limit is downconversion of high-energy photons using singlet fission (SF) in polyacenes like tetracene (Tc). SF enables generation of multiple excitons from the high-energy photons which can be harvested in combination with Si. In this work we investigate the use of lead sulfide quantum dots (PbS QDs) with a band gap close to Si as an interlayer that allows Foerster Resonant Energy Transfer (FRET) from Tc to Si, a process that would be spin-forbidden without the intermediate QD step. We investigate how the conventional FRET model, most commonly applied to the description of molecular interactions, can be modified to describe the geometry of QDs between Tc and Si and how the distance between QD and Si, and the QD bandgap affects the FRET efficiency. By extending the acceptor dipole in the FRET model to a 2D plane, and to the bulk, we see a relaxation of the distance dependence of transfer. Our results indicate that FRET efficiencies from PbS QDs to Si well above 50 % are be possible at very short, but possibly realistic distances of around 1 nm, even for quantum dots with relatively low photoluminescence quantum yield. △ Less

Submitted 26 January, 2018; originally announced January 2018.

Comments: 12 pages, 6 figures submitted to Journal of Photonics for Energy

Quantification of Ion Migration in CH3NH3PbI3 Perovskite Solar Cells by Transient Capacitance Measurements

Authors: Moritz H. Futscher, Ju Min Lee, Lucie McGovern, Loreta A. Muscarella, Tianyi Wang, Muhammad Irfan Haider, Azhar Fakharuddin, Lukas Schmidt-Mende, Bruno Ehrler

Abstract: Solar cells based on organic-inorganic metal halide perovskites show efficiencies close to highly-optimized silicon solar cells. However, ion migration in the perovskite films leads to device degradation and impedes large scale commercial applications. We use transient ion-drift measurements to quantify activation energy, diffusion coefficient, and concentration of mobile ions in methylammonium le… ▽ More Solar cells based on organic-inorganic metal halide perovskites show efficiencies close to highly-optimized silicon solar cells. However, ion migration in the perovskite films leads to device degradation and impedes large scale commercial applications. We use transient ion-drift measurements to quantify activation energy, diffusion coefficient, and concentration of mobile ions in methylammonium lead triiodide (MAPbI3) perovskite solar cells, and find that their properties change close to the tetragonal-to-orthorhombic phase transition temperature. We identify three migrating ion species which we attribute to the migration of iodide (I-) and methylammonium (MA+). We find that the concentration of mobile MA+ ions is one order of magnitude higher than the one of mobile I- ions, and that the diffusion coefficient of mobile MA+ ions is three orders of magnitude lower than the one for mobile I- ions. We furthermore observe that the activation energy of mobile I- ions (0.29 eV) is highly reproducible for different devices, while the activation energy of mobile MA+ depends strongly on device fabrication. This quantification of mobile ions in MAPbI3 will lead to a better understanding of ion migration and its role in operation and degradation of perovskite solar cells. △ Less

Submitted 30 January, 2019; v1 submitted 25 January, 2018; originally announced January 2018.

The Sobering Reality of Perovskite/Si Tandem Solar Cells under Realistic Operating Conditions

Authors: Moritz H. Futscher, Bruno Ehrler

Abstract: Perovskite/Si tandem solar cells have the potential to considerably out-perform conventional solar cells. Under standard test conditions, perovskite/Si tandem solar cells already outperform the Si single junction. Under realistic conditions, however, as we show, those tandem solar cells are hardly more efficient than the Si cell alone. We model the performance of realistic perovskite/Si tandem sol… ▽ More Perovskite/Si tandem solar cells have the potential to considerably out-perform conventional solar cells. Under standard test conditions, perovskite/Si tandem solar cells already outperform the Si single junction. Under realistic conditions, however, as we show, those tandem solar cells are hardly more efficient than the Si cell alone. We model the performance of realistic perovskite/Si tandem solar cells under real-world climate conditions, by incorporating parasitic cell resistances, non-radiative recombination, and optical losses into the detailed-balance limit. We show quantitatively that optimizing these parameters in the perovskite top cell, perovskite/Si tandem solar cells reach an efficiency advantage of up to 14% absolute, even while leaving the Si cell untouched. Despite the rapid efficiency increase of perovskite solar cells, our results emphasize the need for further material development, careful device design, and light management strategies, all necessary for highly efficient perovskite/Si tandem solar cells. △ Less

Submitted 26 June, 2017; originally announced June 2017.

Indirect to direct bandgap transition in methylammonium lead halide perovskite

Authors: Tianyi Wang, Benjamin Daiber, Jarvist M. Frost, Sander A. Mann, Erik C. Garnett, Aron Walsh, Bruno Ehrler

Abstract: Methylammonium lead iodide perovskites are considered direct bandgap semiconductors. Here we show that in fact they present a weakly indirect bandgap 60 meV below the direct bandgap transition. This is a consequence of spin-orbit coupling resulting in Rashba-splitting of the conduction band. The indirect nature of the bandgap explains the apparent contradiction of strong absorption and long charge… ▽ More Methylammonium lead iodide perovskites are considered direct bandgap semiconductors. Here we show that in fact they present a weakly indirect bandgap 60 meV below the direct bandgap transition. This is a consequence of spin-orbit coupling resulting in Rashba-splitting of the conduction band. The indirect nature of the bandgap explains the apparent contradiction of strong absorption and long charge carrier lifetime. Under hydrostatic pressure from ambient to 325 MPa, Rashba splitting is reduced due to a pressure induced ordering of the crystal structure. The nature of the bandgap becomes increasingly more direct, resulting in five times faster charge carrier recombination, and a doubling of the radiative efficiency. At hydrostatic pressures above 325 MPa, MAPI undergoes a reversible phase transition resulting in a purely direct bandgap semiconductor. The pressure-induced changes suggest epitaxial and synthetic routes to higher efficiency optoelectronic devices. △ Less

Submitted 22 September, 2016; originally announced September 2016.

Journal ref: Energy and Environmental Science 10, 509 (2017)

A Silicon-Singlet Fission Parallel Tandem Solar Cell Exceeding 100 % External Quantum Efficiency

Authors: Luis M. Pazos, Ju Min Lee, Anton Kirch, Maxim Tabachnyk, Richard H. Friend, Bruno Ehrler

Abstract: Silicon solar cells dominate the solar cell market with record lab efficiencies reaching almost 26%. However, after 60 years of research, this efficiency saturated close to the theoretical limit for silicon, and radically new approaches are needed to further improve the efficiency. Here we present parallel-connected tandem solar cells based on down-conversion via singlet fission. This design allow… ▽ More Silicon solar cells dominate the solar cell market with record lab efficiencies reaching almost 26%. However, after 60 years of research, this efficiency saturated close to the theoretical limit for silicon, and radically new approaches are needed to further improve the efficiency. Here we present parallel-connected tandem solar cells based on down-conversion via singlet fission. This design allows raising the theoretical power conversion efficiency limit to 45% with far superior stability under changing sunlight conditions in comparison to traditional series tandems. We experimentally demonstrate a silicon/pentacene parallel tandem solar cell that exceeds 100% external quantum efficiency at the main absorption peak of pentacene, showing efficient photocurrent addition and proving this design as a realistic prospect for real-world applications. △ Less

Submitted 23 December, 2015; originally announced December 2015.

Journal ref: ACS Energy Letters 2017, 2 (2), pp 476-480

Analysis of the inverse square-root size effect in the plasticity of metals

Authors: T. T. Zhu, B. Ehrler, X. D. Hou, A. J. Bushby, D. J. Dunstan

Abstract: Small-scale mechanical behaviour shows significant departures from classical elastic-plastic theory. In a remarkable number of instances, the strength of a material appears to scale as the reciprocal square root of the smallest length scale. There are several recent experimental and modeling results in the literature that show an interaction between dimensional (extrinsic) size and microstructur… ▽ More Small-scale mechanical behaviour shows significant departures from classical elastic-plastic theory. In a remarkable number of instances, the strength of a material appears to scale as the reciprocal square root of the smallest length scale. There are several recent experimental and modeling results in the literature that show an interaction between dimensional (extrinsic) size and microstructural (intrinsic) size effects. In this paper, we present a mechanical model that naturally produces the inverse square root strengthening and derive an expression for the effective length when both the extrinsic and intrinsic size effects are significant. The theory fits well to data from a wide range of deformation geometries and includes the interaction between the microstructural and dimensional size effects. Furthermore, this approach is able to predict the size effect under uniform deformation without strain gradient. △ Less

Submitted 29 October, 2009; originally announced October 2009.