-
Controlling wall particle interactions with activity
Authors:
Luke Neville,
Jens Eggers,
Tanniemola Liverpool
Abstract:
We calculate the effective forces on hard disks near walls embedded inside active nematic liquid crystals. When the disks are sufficiently close to the wall and the flows are sufficiently slow, we can obtain exact expressions for the effective forces. We find these forces and the dynamics of disks near the wall depend both on the properties of the active nematic and on the anchoring conditions on…
▽ More
We calculate the effective forces on hard disks near walls embedded inside active nematic liquid crystals. When the disks are sufficiently close to the wall and the flows are sufficiently slow, we can obtain exact expressions for the effective forces. We find these forces and the dynamics of disks near the wall depend both on the properties of the active nematic and on the anchoring conditions on the disks and the wall. Our results show that the presence of active stresses attract planar anchored disks to walls if the activity is extensile, and repel them if contractile. For normal anchored disks the reverse is true; they are attracted in contractile systems, and repelled in extensile ones.
△ Less
Submitted 6 June, 2024;
originally announced June 2024.
-
When does the elastic regime begin in viscoelastic pinch-off?
Authors:
A. Gaillard,
M. A. Herrada,
A. Deblais,
C. van Poelgeest,
L. Laruelle,
J. Eggers,
D. Bonn
Abstract:
In this experimental and numerical study, we revisit the question of the onset of the elastic regime in viscoelastic pinch-off. This is relevant for all modern filament thinning techniques which aim at measuring the extensional properties of low-viscosity polymer solutions such as the Slow Retraction Method (SRM) in Capillary Breakup Extensional Rheometry (CaBER) as well as the drip** method whe…
▽ More
In this experimental and numerical study, we revisit the question of the onset of the elastic regime in viscoelastic pinch-off. This is relevant for all modern filament thinning techniques which aim at measuring the extensional properties of low-viscosity polymer solutions such as the Slow Retraction Method (SRM) in Capillary Breakup Extensional Rheometry (CaBER) as well as the drip** method where a drop detaches from a nozzle. In these techniques, a stable liquid bridge is slowly brought to its stability threshold where capillary-driven thinning starts, slowing down dramatically at a critical radius $h_1$ marking the onset of the elastic regime where the bridge becomes a filament with elasto-capillary thinning dynamics. While a theoretical scaling for this transition radius exists for the classical step-strain CaBER protocol, where polymer chains stretch without relaxing during the fast plate separation, we show that it is not necessarily valid for a slow protocol such as in SRM since polymer chains only start stretching (beyond their equilibrium coiled configuration) when the bridge thinning rate becomes comparable to the inverse of their relaxation time. We derive a universal scaling for $h_1$ valid for both low and high-viscosity polymer solution which is validated by both CaBER (SRM) experiments with different polymer solutions, plate diameters and sample volumes and by numerical simulations using the FENE-P model.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Early Stages of Drop Coalescence
Authors:
Antoine Deblais,
Kaili Xie,
Peter Lewin-Jones,
Dirk Aarts,
Miguel A. Herrada,
Jens Eggers,
James E. Sprittles,
Daniel Bonn
Abstract:
Despite the large body of research on coalescence, firm agreement between experiment, theory, and computation has not been established for the very earliest times following the initial contact of two liquid volumes. Combining a range of experimental and computational modelling approaches, we have been able to elucidate the influence of the intervening gas, of the van der Waals forces and of therma…
▽ More
Despite the large body of research on coalescence, firm agreement between experiment, theory, and computation has not been established for the very earliest times following the initial contact of two liquid volumes. Combining a range of experimental and computational modelling approaches, we have been able to elucidate the influence of the intervening gas, of the van der Waals forces and of thermal fluctuations on coalescence. For simple liquids, the gas influences both pre- and post-contact regimes, with a jump-to-contact the primary mode of merging. Subsequently, wave-like air pockets are observed. For a system with ultralow interfacial tension, that mimics nanodrop behaviour, the very first moments are governed by thermal fluctuations at the interfaces, with a nontrivial opening speed given by stochastic thermally driven motion.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Viscoelastic wetting: Cox-Voinov theory with normal stress effects
Authors:
Minkush Kansal,
Vincent Bertin,
Charu Datt,
Jens Eggers,
Jacco H. Snoeijer
Abstract:
The classical Cox-Voinov theory of contact line motion provides a relation between the macroscopically observable contact angle, and the microscopic wetting angle as a function of contact line velocity. Here we investigate how viscoelasticity, specifically the normal stress effect, modifies wetting dynamics. Using the thin film equation for the second-order fluid, it is found that the normal stres…
▽ More
The classical Cox-Voinov theory of contact line motion provides a relation between the macroscopically observable contact angle, and the microscopic wetting angle as a function of contact line velocity. Here we investigate how viscoelasticity, specifically the normal stress effect, modifies wetting dynamics. Using the thin film equation for the second-order fluid, it is found that the normal stress effect is dominant at small scales. We show that the effect can be incorporated in the Cox-Voinov theory through an apparent microscopic angle, which differs from the true microscopic angle. The theory is applied to the classical problems of drop spreading and dip-coating, which shows how normal stress facilitates (inhibits) the motion of advancing (receding) contact lines. For rapid advancing motion, the apparent microscopic angle can tend to zero in which case the dynamics is described by a new regime that was already anticipated in Boudaoud (2007).
△ Less
Submitted 26 March, 2024; v1 submitted 17 October, 2023;
originally announced October 2023.
-
Beware of CaBER: Filament thinning rheometry doesn't give `the' relaxation time of polymer solutions
Authors:
Antoine Gaillard,
Miguel Angel Herrada Gutierrez,
Antoine Deblais,
Jens Eggers,
Daniel Bonn
Abstract:
The viscoelastic relaxation time of a polymer solution is often measured using Capillary Breakup Extensional Rheometry (CaBER) where a droplet is placed between two plates which are pulled apart to form a thinning filament. For a slow plate retraction protocol, required to avoid inertio-capillary oscillations for low-viscosity liquids, we show experimentally that the CaBER relaxation time $τ_e$ in…
▽ More
The viscoelastic relaxation time of a polymer solution is often measured using Capillary Breakup Extensional Rheometry (CaBER) where a droplet is placed between two plates which are pulled apart to form a thinning filament. For a slow plate retraction protocol, required to avoid inertio-capillary oscillations for low-viscosity liquids, we show experimentally that the CaBER relaxation time $τ_e$ inferred from the exponential thinning regime is in fact an apparent relaxation time that increases significantly when increasing the plate diameter and the droplet volume. Similarly, we observe that $τ_e$ increases with the plate diameter for the classical step-strain plate separation protocol of a commercial (Haake) CaBER device and increases with the nozzle diameter for a Drip**-onto-Substrate (DoS) method. This dependence on the flow history before the formation of the viscoelastic filament is in contradiction with polymer models such as Oldroyd-B that predict a filament thinning rate $1/3τ$ ($τ$ being the model's relaxation time) which is a material property independent of geometrical factors. We show that this is not due to artefacts such as solvent evaporation or polymer degradation and that it can only be rationalised by finite extensibility effects (FENE-P model) for a dilute polymer solution in a viscous solvent, but not for semi-dilute solutions in a low-viscosity solvent.
△ Less
Submitted 6 May, 2024; v1 submitted 15 September, 2023;
originally announced September 2023.
-
Rheology of suspensions of flat elastic particles
Authors:
Jens Eggers,
Tanniemola B. Liverpool,
Alexander Mietke
Abstract:
We consider a suspension of non-interacting flat elastic particles in a Newtonian fluid. We model a flat shape as three beads, carried along by the flow according to Stokes' law, and connected by nonlinear springs, chosen such that the energy is quadratic in the area. In analogy with common dumbbell models involving two beads connected by linear springs, we solve the stochastic equations of motion…
▽ More
We consider a suspension of non-interacting flat elastic particles in a Newtonian fluid. We model a flat shape as three beads, carried along by the flow according to Stokes' law, and connected by nonlinear springs, chosen such that the energy is quadratic in the area. In analogy with common dumbbell models involving two beads connected by linear springs, we solve the stochastic equations of motion exactly to compute the constitutive law for the stress tensor of a flat elastic particle suspension. A lower convected time derivative naturally arises as part of the constitutive law, but surprisingly the rheological response in strong extensional and strong contracting flows is similar to that of the classical Oldroyd-B model associated with dumbbell suspensions.
△ Less
Submitted 17 June, 2023; v1 submitted 6 April, 2023;
originally announced April 2023.
-
Anomalous dimensions of the Smoluchowski coagulation equation
Authors:
J. Eggers,
M. A. Fontelos
Abstract:
The coagulation (or aggregation) equation was introduced by Smoluchowski in 1916 to describe the clum** together of colloidal particles through diffusion, but has been used in many different contexts as diverse as physical chemistry, chemical engineering, atmospheric physics, planetary science, and economics. The effectiveness of clum** is described by a kernel $K(x,y)$, which depends on the s…
▽ More
The coagulation (or aggregation) equation was introduced by Smoluchowski in 1916 to describe the clum** together of colloidal particles through diffusion, but has been used in many different contexts as diverse as physical chemistry, chemical engineering, atmospheric physics, planetary science, and economics. The effectiveness of clum** is described by a kernel $K(x,y)$, which depends on the sizes of the colliding particles $x,y$. We consider kernels $K = (xy)^γ$, but any homogeneous function can be treated using our methods. For sufficiently effective clum** $1 \ge γ> 1/2$, the coagulation equation produces an infinitely large cluster in finite time (a process known as the gel transition). Using a combination of analytical methods and numerics, we calculate the anomalous scaling dimensions of the main cluster growth, calling into question results much used in the literature. Apart from the solution branch which originates from the exactly solvable case $γ= 1$, we find a new branch of solutions near $γ= 1/2$, which violates scaling relations widely believed to hold universal.
△ Less
Submitted 24 December, 2022;
originally announced December 2022.
-
Exact results for sheared polar active suspensions with variable liquid crystalline order
Authors:
Aurore Loisy,
Anthony P. Thompson,
Jens Eggers,
Tanniemola B. Liverpool
Abstract:
We consider a confined sheared active polar liquid crystal with a uniform orientation and study the effect of variations in the magnitude of polarization. Restricting our analysis to one-dimensional geometries, we demonstrate that with asymmetric boundary conditions, this system is characterized, macroscopically, by a linear shear stress vs. shear strain relationship that does not pass through the…
▽ More
We consider a confined sheared active polar liquid crystal with a uniform orientation and study the effect of variations in the magnitude of polarization. Restricting our analysis to one-dimensional geometries, we demonstrate that with asymmetric boundary conditions, this system is characterized, macroscopically, by a linear shear stress vs. shear strain relationship that does not pass through the origin: At a zero strain rate, the fluid sustains a non-zero stress. Analytic solutions for the polarization, density, and velocity fields are derived for asymptotically large or small systems and are shown by comparison with precise numerical solutions to be good approximations for finite-size systems.
△ Less
Submitted 11 December, 2022;
originally announced December 2022.
-
MARS : a Method for the Adaptive Removal of Stiffness in PDEs
Authors:
Laurent Duchemin,
Jens Eggers
Abstract:
The E(xplicit)I(implicit)N(null) method was developed recently to remove numerical instability from PDEs, adding and subtracting an operator $\mathcal{D}$ of arbitrary structure, treating the operator implicitly in one case, and explicitly in the other. Here we extend this idea by devising an adaptive procedure to find an optimal approximation for $\mathcal{D}$. We propose a measure of the numeric…
▽ More
The E(xplicit)I(implicit)N(null) method was developed recently to remove numerical instability from PDEs, adding and subtracting an operator $\mathcal{D}$ of arbitrary structure, treating the operator implicitly in one case, and explicitly in the other. Here we extend this idea by devising an adaptive procedure to find an optimal approximation for $\mathcal{D}$. We propose a measure of the numerical error which detects numerical instabilities across all wavelengths, and adjust each Fourier component of $\mathcal{D}$ to the smallest value such that numerical instability is suppressed. We show that for a number of nonlinear and non-local PDEs, in one and two dimensions, the spectrum of $\mathcal{D}$ adapts automatically and dynamically to the theoretical result for marginal stability. Our method thus has the same stability properties as a fully implicit method, while only requiring the computational cost comparable to an explicit solver. The adaptive implicit part is diagonal in Fourier space, and thus leads to minimal overhead compared to the explicit method.
△ Less
Submitted 29 June, 2022;
originally announced July 2022.
-
Perspectives on viscoelastic flow instabilities and elastic turbulence
Authors:
Sujit S. Datta,
Arezoo M. Ardekani,
Paulo E. Arratia,
Antony N. Beris,
Irmgard Bischofberger,
Jens G. Eggers,
J. Esteban López-Aguilar,
Suzanne M. Fielding,
Anna Frishman,
Michael D. Graham,
Jeffrey S. Guasto,
Simon J. Haward,
Sarah Hormozi,
Gareth H. McKinley,
Robert J. Poole,
Alexander Morozov,
V. Shankar,
Eric S. G. Shaqfeh,
Amy Q. Shen,
Holger Stark,
Victor Steinberg,
Ganesh Subramanian,
Howard A. Stone
Abstract:
Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the h…
▽ More
Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the hallmarks of turbulence -- even though the effective Reynolds numbers may be $O(1)$ or smaller. We provide perspectives on viscoelastic flow instabilities by integrating the input from speakers at a recent international workshop: historical remarks, characterization of fluids and flows, discussion of experimental and simulation tools, and modern questions and puzzles that motivate further studies of this fascinating subject. The materials here will be useful for researchers and educators alike, especially as the subject continues to evolve in both fundamental understanding and applications in engineering and the sciences.
△ Less
Submitted 22 August, 2021;
originally announced August 2021.
-
Self-similarity in the breakup of very dilute viscoelastic solutions
Authors:
A. Deblais,
M. A. Herrada,
J. Eggers,
D. Bonn
Abstract:
When pushed out of a syringe, polymer solutions form droplets attached by long and slender cylindrical filaments whose diameter decreases exponentially with time before eventually breaking. In the last stages of this process, a striking feature is the self-similarity of the solution shape near the end of the filament. This means that shapes at different times, if properly rescaled, collapse onto o…
▽ More
When pushed out of a syringe, polymer solutions form droplets attached by long and slender cylindrical filaments whose diameter decreases exponentially with time before eventually breaking. In the last stages of this process, a striking feature is the self-similarity of the solution shape near the end of the filament. This means that shapes at different times, if properly rescaled, collapse onto one universal shape. A theoretical description inspired by this similarity observation and based on the Oldroyd-B model was recently shown to disagree with existing experimental results. By revisiting these measurements and analysing the interface profiles of very diluted polyethylene oxide solutions at high temporal and spatial resolution, we show that they are very well described by the model.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Stability of similarity solutions of viscous thread pinch-off
Authors:
Michael C. Dallaston,
Chengxi Zhao,
James E. Sprittles,
Jens Eggers
Abstract:
In this paper we compute the linear stability of similarity solutions of the breakup of viscous liquid threads, in which the viscosity and inertia of the liquid are in balance with the surface tension. The stability of the similarity solution is determined using numerical continuation to find the dominant eigenvalues. Stability of the first two solutions (those with largest minimum radius) is cons…
▽ More
In this paper we compute the linear stability of similarity solutions of the breakup of viscous liquid threads, in which the viscosity and inertia of the liquid are in balance with the surface tension. The stability of the similarity solution is determined using numerical continuation to find the dominant eigenvalues. Stability of the first two solutions (those with largest minimum radius) is considered. We find that the first similarity solution, which is the one seen in experiments and simulations, is linearly stable with a complex nontrivial eigenvalue, which could explain the phenomenon of break-up producing sequences of small satellite droplets of decreasing radius near a main pinch-off point. The second solution is seen to be linearly unstable. These linear stability results compare favorably to numerical simulations for the stable similarity solution, while a profile starting near the unstable similarity solution is shown to very rapidly leave the linear regime.
△ Less
Submitted 9 October, 2021; v1 submitted 11 June, 2021;
originally announced June 2021.
-
Elastic Rayleigh-Plateau instability: Dynamical selection of nonlinear states
Authors:
Anupam Pandey,
Minkush Kansal,
Miguel A. Herrada,
Jens Eggers,
Jacco H. Snoeijer
Abstract:
A slender thread of elastic hydrogel is susceptible to a surface instability that is reminiscent of the classical Rayleigh-Plateau instability of liquid jets. The final, highly nonlinear states that are observed in experiments arise from a competition between capillarity and large elastic deformations. Combining a slender analysis and fully three-dimensional numerical simulations, we present the p…
▽ More
A slender thread of elastic hydrogel is susceptible to a surface instability that is reminiscent of the classical Rayleigh-Plateau instability of liquid jets. The final, highly nonlinear states that are observed in experiments arise from a competition between capillarity and large elastic deformations. Combining a slender analysis and fully three-dimensional numerical simulations, we present the phase map of all possible morphologies for an unstable neo-Hookean cylinder subjected to capillary forces. Interestingly, for softer cylinders we find the coexistence of two distinct configurations, namely, cylinders-on-a-string and beads-on-a-string. It is shown that for a given set of parameters, the final pattern is selected via a dynamical evolution. To capture this, we compute the dispersion relation and determine the characteristic wavelength of the dynamically selected profiles. The validity of the "slender" results is confirmed via simulations and these results are consistent with experiments on elastic and viscoelastic threads.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Influence of the surface viscous stress on the pinch-off of free surfaces loaded with nearly-inviscid surfactants
Authors:
A. Ponce-Torres,
M. Rubio,
M. A. Herrada,
J. Eggers,
J. M. Montanero
Abstract:
We analyze both theoretically and experimentally the breakup of a pendant water droplet loaded with Sodium Dodecyl Sulfate (SDS). The free surface minimum radius measured in the experiments is compared with that obtained from a numerical solution of the full Navier-Stokes equations for different values of the shear and dilatational surface viscosities. This comparison shows the small but measurabl…
▽ More
We analyze both theoretically and experimentally the breakup of a pendant water droplet loaded with Sodium Dodecyl Sulfate (SDS). The free surface minimum radius measured in the experiments is compared with that obtained from a numerical solution of the full Navier-Stokes equations for different values of the shear and dilatational surface viscosities. This comparison shows the small but measurable effect of the surface viscous stresses on the system dynamics for sufficiently small spatiotemporal distances from the breakup point, and allows to establish upper bounds for the values of the shear and dilatational viscosities. We study numerically the distribution of Marangoni and viscous stresses over the free surface as a function of the time to the pinching, and describe how surface viscous stresses grow in the pinching region as the free surface approaches its breakup. When Marangoni and surface viscosity stresses are taken into account, the surfactant is not swept away from the thread neck in the time interval analyzed. Surface viscous stresses eventually balance the driving capillary pressure in that region for small enough values of the time to pinching. Based on this result, we propose a scaling law to account for the effect of the surface viscosities on the last stage of the temporal evolution of the neck radius.
△ Less
Submitted 9 April, 2020;
originally announced April 2020.
-
How many ways a cell can move: the modes of self-propulsion of an active drop
Authors:
Aurore Loisy,
Jens Eggers,
Tanniemola B. Liverpool
Abstract:
Numerous physical models have been proposed to explain how cell motility emerges from internal activity, mostly focused on how crawling motion arises from internal processes. Here we offer a classification of self-propulsion mechanisms based on general physical principles, showing that crawling is not the only way for cells to move on a substrate. We consider a thin drop of active matter on a plan…
▽ More
Numerous physical models have been proposed to explain how cell motility emerges from internal activity, mostly focused on how crawling motion arises from internal processes. Here we offer a classification of self-propulsion mechanisms based on general physical principles, showing that crawling is not the only way for cells to move on a substrate. We consider a thin drop of active matter on a planar substrate and fully characterize its autonomous motion for all three possible sources of driving: (i) the stresses induced in the bulk by active components, which allow in particular tractionless motion, (ii) the self-propulsion of active components at the substrate, which gives rise to crawling motion, and (iii) a net capillary force, possibly self-generated, and coupled to internal activity. We determine travelling-wave solutions to the lubrication equations as a function of a dimensionless activity parameter for each mode of motion. Numerical simulations are used to characterize the drop motion over a wide range of activity magnitudes, and explicit analytical solutions in excellent agreement with the simulations are derived in the weak-activity regime.
△ Less
Submitted 4 March, 2020; v1 submitted 12 January, 2020;
originally announced January 2020.
-
Tractionless Self-Propulsion of Active Drops
Authors:
Aurore Loisy,
Jens Eggers,
Tanniemola B. Liverpool
Abstract:
We report on a new mode of self-propulsion exhibited by compact drops of active liquids on a substrate which, remarkably, is tractionless, i.e., which imparts no mechanical stress locally on the surface. We show, both analytically and by numerical simulation, that the equations of motion for an active nematic drop possess a simple self-propelling solution, with no traction on the solid surface and…
▽ More
We report on a new mode of self-propulsion exhibited by compact drops of active liquids on a substrate which, remarkably, is tractionless, i.e., which imparts no mechanical stress locally on the surface. We show, both analytically and by numerical simulation, that the equations of motion for an active nematic drop possess a simple self-propelling solution, with no traction on the solid surface and in which the direction of motion is controlled by the winding of the nematic director field across the drop height. The physics underlying this mode of motion has the same origins as that giving rise to the zero viscosity observed in bacterial suspensions. This topologically protected tractionless self-propusion provides a robust physical mechanism for efficient cell migration in crowded environments like tissues.
△ Less
Submitted 10 December, 2019;
originally announced December 2019.
-
Self-similar breakup of polymeric threads as described by the Oldroyd-B model
Authors:
J. Eggers,
M. A. Herrada,
J. H. Snoeijer
Abstract:
When a drop of fluid containing long, flexible polymers breaks up, it forms threads of almost constant thickness, whose size decreases exponentially in time. Using an Oldroyd-B fluid as a model, we show that the thread profile, rescaled by the thread thickness, converges to a similarity solution. Using the correspondence between viscoelastic fluids and non-linear elasticity, we derive similarity e…
▽ More
When a drop of fluid containing long, flexible polymers breaks up, it forms threads of almost constant thickness, whose size decreases exponentially in time. Using an Oldroyd-B fluid as a model, we show that the thread profile, rescaled by the thread thickness, converges to a similarity solution. Using the correspondence between viscoelastic fluids and non-linear elasticity, we derive similarity equations for the full three-dimensional axisymmetric flow field in the limit that the viscosity of the solvent fluid can be neglected. A conservation law balancing pressure and elastic energy permits to calculate the thread thickness exactly. The explicit form of the velocity and stress fields can be deduced from a solution of the similarity equations. Results are validated by detailed comparison with numerical simulations.
△ Less
Submitted 29 May, 2019;
originally announced May 2019.
-
The relationship between viscoelasticity and elasticity
Authors:
J. H. Snoeijer,
A. Pandey,
M. A. Herrada,
J. Eggers
Abstract:
We consider models for elastic liquids, such as solutions of flexible polymers. They introduce a relaxation time $λ$ into the system, over which stresses relax. We study the kinematics of the problem, and clarify the relationship between Lagrangian and Eulerian descriptions, thereby showing which polymer models correspond to a nonlinear elastic deformation in the limit $λ\rightarrow\infty$. This a…
▽ More
We consider models for elastic liquids, such as solutions of flexible polymers. They introduce a relaxation time $λ$ into the system, over which stresses relax. We study the kinematics of the problem, and clarify the relationship between Lagrangian and Eulerian descriptions, thereby showing which polymer models correspond to a nonlinear elastic deformation in the limit $λ\rightarrow\infty$. This allows us to split the change in elastic energy into reversible and dissipative parts, and thus to write an equation for the total energy, the sum of kinetic and elastic energies. As an illustration, we show how the presence or absence of an elastic limit determines the fate of an elastic thread during capillary instability, using novel numerical schemes based on our insights into the flow kinematics.
△ Less
Submitted 29 May, 2019;
originally announced May 2019.
-
Curvature regularization near contacts with stretched elastic tubes
Authors:
Bhargav Rallabandi,
Joel Marthelot,
P. -T. Brun,
Jens Eggers
Abstract:
Bringing a rigid object into contact with a soft elastic tube causes the tube to conform to the surface of the object, resulting in contact lines. The curvature of the tube walls near these contact lines is often large and is typically regularized by the finite bending rigidity of the tube. Here, we show using experiments and a Föppl--von Kármán-like theory that a second mechanism of curvature reg…
▽ More
Bringing a rigid object into contact with a soft elastic tube causes the tube to conform to the surface of the object, resulting in contact lines. The curvature of the tube walls near these contact lines is often large and is typically regularized by the finite bending rigidity of the tube. Here, we show using experiments and a Föppl--von Kármán-like theory that a second mechanism of curvature regularization occurs when the tube is axially stretched. The radius of curvature obtained is unrelated to the bending rigidity of the tube walls, increases with the applied stretching force and decreases with sheet thickness, in contrast with the effects of finite bending rigidity. %Moreover, the axial force decreases the contact area between the tube and the intruding object, potentially reducing the drag necessary to propel the object through the tube. We show that these features are due to an interplay between geometry and mechanics specific to elastic tubes, but one that is absent from both planar sheets and spherical shells.
△ Less
Submitted 26 February, 2019;
originally announced February 2019.
-
Opposed flow focusing: evidence of a second order jetting transition
Authors:
Jun Dong,
Max Meissner,
Jens Eggers,
Annela M. Seddon,
C. Patrick Royall
Abstract:
We propose a novel microfluidic "opposed-flow" geometry in which the continuous fluid phase is fed into a junction in a direction opposite the dispersed phase. This pulls out the dispersed phase into a micron-sized jet, which decays into micron-sized droplets. As the driving pressure is tuned to a critical value, the jet radius vanishes as a power law down to sizes below 1 $μ$m. By contrast, the c…
▽ More
We propose a novel microfluidic "opposed-flow" geometry in which the continuous fluid phase is fed into a junction in a direction opposite the dispersed phase. This pulls out the dispersed phase into a micron-sized jet, which decays into micron-sized droplets. As the driving pressure is tuned to a critical value, the jet radius vanishes as a power law down to sizes below 1 $μ$m. By contrast, the conventional "coflowing" junction leads to a first order jetting transition, in which the jet disappears at a finite radius of several $μ$m, to give way to a "drip**" state, resulting in much larger droplets. We demonstrate the effectiveness of our method by producing the first microfluidic silicone oil emulsions with a sub micron particle radius, and utilize these droplets to produce colloidal clusters.
△ Less
Submitted 5 April, 2018; v1 submitted 4 April, 2018;
originally announced April 2018.
-
Active suspensions have non-monotonic flow curves and multiple mechanical equilibria
Authors:
Aurore Loisy,
Jens Eggers,
Tanniemola B. Liverpool
Abstract:
We point out unconventional mechanical properties of confined active fluids, such as bacterial suspensions, under shear. Using a minimal model of an active liquid crystal with no free parameters, we predict the existence of a window of bacteria concentration for which a suspension of \textit{E.~Coli} effectively behaves, at steady-state, as a negative viscosity fluid and reach quantitative agreeme…
▽ More
We point out unconventional mechanical properties of confined active fluids, such as bacterial suspensions, under shear. Using a minimal model of an active liquid crystal with no free parameters, we predict the existence of a window of bacteria concentration for which a suspension of \textit{E.~Coli} effectively behaves, at steady-state, as a negative viscosity fluid and reach quantitative agreement with experimental measurements. Our theoretical analysis further shows that a negative apparent viscosity is due to a non-monotonic local velocity profile, and is associated with a non-monotonic stress vs. strain rate flow curve. This implies that fixed stress and fixed strain rate ensembles are not equivalent for active fluids.
△ Less
Submitted 5 October, 2019; v1 submitted 1 March, 2018;
originally announced March 2018.
-
Pair creation, motion, and annihilation of topological defects in 2D nematics
Authors:
Dario Cortese,
Jens Eggers,
Tanniemola B. Liverpool
Abstract:
We present a novel framework for the study of disclinations in two-dimensional active nematic liquid crystals, and topological defects in general. The order tensor formalism is used to calculate exact multi-particle solutions of the linearized static equations inside a uniformly aligned state. Topological charge conservation requires a fixed difference between the number of half charges. Starting…
▽ More
We present a novel framework for the study of disclinations in two-dimensional active nematic liquid crystals, and topological defects in general. The order tensor formalism is used to calculate exact multi-particle solutions of the linearized static equations inside a uniformly aligned state. Topological charge conservation requires a fixed difference between the number of half charges. Starting from a set of hydrodynamic equations, we derive a low-dimensional dynamical system for the parameters of the static solutions, which describes the motion of a half-disclination pair, or of several pairs. Within this formalism, we model defect production and annihilation, as observed in experiments. Our dynamics also provide an estimate for the critical density at which production and annihilation rates are balanced.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Thermal rupture of a free liquid sheet
Authors:
Georgy Kitavtsev,
Marco A. Fontelos,
Jens Eggers
Abstract:
We consider a free liquid sheet, taking into account the dependence of surface tension on temperature, or concentration of some pollutant. The sheet dynamics are described within a long-wavelength description. In the presence of viscosity, local thinning of the sheet is driven by a strong temperature gradient across the pinch region, resembling a shock. As a result, for long times the sheet thins…
▽ More
We consider a free liquid sheet, taking into account the dependence of surface tension on temperature, or concentration of some pollutant. The sheet dynamics are described within a long-wavelength description. In the presence of viscosity, local thinning of the sheet is driven by a strong temperature gradient across the pinch region, resembling a shock. As a result, for long times the sheet thins exponentially, leading to breakup. We describe the quasi one-dimensional thickness, velocity, and temperature profiles in the pinch region in terms of similarity solutions, which posses a universal structure. Our analytical description agrees quantitatively with numerical simulations.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
Cusp-shaped Elastic Creases and Furrows
Authors:
S. Karpitschka,
J. Eggers,
A. Pandey,
J. H. Snoeijer
Abstract:
The surfaces of growing biological tissues, swelling gels, and compressed rubbers do not remain smooth, but frequently exhibit highly localized inward folds. We reveal the morphology of this surface folding in a novel experimental setup, which permits to deform the surface of a soft gel in a controlled fashion. The interface first forms a sharp furrow, whose tip size decreases rapidly with deforma…
▽ More
The surfaces of growing biological tissues, swelling gels, and compressed rubbers do not remain smooth, but frequently exhibit highly localized inward folds. We reveal the morphology of this surface folding in a novel experimental setup, which permits to deform the surface of a soft gel in a controlled fashion. The interface first forms a sharp furrow, whose tip size decreases rapidly with deformation. Above a critical deformation, the furrow bifurcates to an inward folded crease of vanishing tip size. We show experimentally and numerically that both creases and furrows exhibit a universal cusp-shape, whose width scales like $y^{3/2}$ at a distance $y$ from the tip. We provide a similarity theory that captures the singular profiles before and after the self-folding bifurcation, and derive the length of the fold from large deformation elasticity.
△ Less
Submitted 2 October, 2017; v1 submitted 3 May, 2017;
originally announced May 2017.
-
Classification of certain types of maximal matrix subalgebras
Authors:
John Eggers,
Ron Evans,
Mark Van Veen
Abstract:
Let $M_n(K)$ denote the algebra of $n \times n$ matrices over a field $K$ of characteristic zero. A nonunital subalgebra $N \subset M_n(K)$ will be called a nonunital intersection if $N$ is the intersection of two unital subalgebras of $M_n(K)$. Appealing to recent work of Agore, we show that for $n \ge 3$, the dimension (over $K$) of a nonunital intersection is at most $(n-1)(n-2)$, and we comple…
▽ More
Let $M_n(K)$ denote the algebra of $n \times n$ matrices over a field $K$ of characteristic zero. A nonunital subalgebra $N \subset M_n(K)$ will be called a nonunital intersection if $N$ is the intersection of two unital subalgebras of $M_n(K)$. Appealing to recent work of Agore, we show that for $n \ge 3$, the dimension (over $K$) of a nonunital intersection is at most $(n-1)(n-2)$, and we completely classify the nonunital intersections of maximum dimension $(n-1)(n-2)$. We also classify the unital subalgebras of maximum dimension properly contained in a parabolic subalgebra of maximum dimension in $M_n(K)$.
△ Less
Submitted 8 April, 2017;
originally announced April 2017.
-
Spatial structure of shock formation
Authors:
J. Eggers,
T. Grava,
M. A. Herrada,
G. Pitton
Abstract:
The formation of a singularity in a compressible gas, as described by the Euler equation, is characterized by the steepening, and eventual overturning of a wave. Using a self-similar description in two space dimensions, we show that the spatial structure of this process, which starts at a point, is equivalent to the formation of a caustic, i.e. to a cusp catastrophe. The lines along which the prof…
▽ More
The formation of a singularity in a compressible gas, as described by the Euler equation, is characterized by the steepening, and eventual overturning of a wave. Using a self-similar description in two space dimensions, we show that the spatial structure of this process, which starts at a point, is equivalent to the formation of a caustic, i.e. to a cusp catastrophe. The lines along which the profile has infinite slope correspond to the caustic lines, from which we construct the position of the shock. By solving the similarity equation, we obtain a complete local description of wave steepening and of the spreading of the shock from a point.
△ Less
Submitted 31 December, 2016;
originally announced January 2017.
-
Oil-in-water microfluidics on the colloidal scale: new routes to self-assembly and glassy packings
Authors:
Max Meissner,
Jun Dong,
Jens Eggers,
Annela M. Seddon,
C. Patrick Royall
Abstract:
We have developed Norland Optical Adhesive (NOA) flow focusing devices, making use of the excellent solvent compatibility and surface properties of NOA to generate micron scale oil-in-water emulsions with polydispersities as low as 5%. While current work on microfluidic oil-in-water emulsification largely concerns the production of droplets with sizes on the order of 10s of micrometres, large enou…
▽ More
We have developed Norland Optical Adhesive (NOA) flow focusing devices, making use of the excellent solvent compatibility and surface properties of NOA to generate micron scale oil-in-water emulsions with polydispersities as low as 5%. While current work on microfluidic oil-in-water emulsification largely concerns the production of droplets with sizes on the order of 10s of micrometres, large enough that Brownian motion is negligible, our NOA devices can produce droplets with radii ranging from 2 μm to 12 μm. To demonstrate the utility of these emulsions as colloidal model systems we produce fluorescently labelled polydimethylsiloxane droplets suitable for particle resolved studies with confocal microscopy. We analyse the structure of the resulting emulsion in 3D using coordinate tracking and the topological cluster classification and reveal a new mono-disperse thermal system.
△ Less
Submitted 21 October, 2016; v1 submitted 3 September, 2016;
originally announced September 2016.
-
Probing colloidal gels at multiple lengthscales: the role of hydrodynamics
Authors:
C. Patrick Royall,
Jens Eggers,
Akira Furukawa,
Hajime Tanaka
Abstract:
Colloidal gels are out-of-equilibrium structures, made up of a rarefied network of colloidal particles. Comparing experiments to numerical simulations, with hydrodynamic interactions switched off, we demonstrate the crucial role of the solvent for gelation. Hydrodynamic interactions suppress the formation of larger local equilibrium structures of closed geometry, and instead lead to the formation…
▽ More
Colloidal gels are out-of-equilibrium structures, made up of a rarefied network of colloidal particles. Comparing experiments to numerical simulations, with hydrodynamic interactions switched off, we demonstrate the crucial role of the solvent for gelation. Hydrodynamic interactions suppress the formation of larger local equilibrium structures of closed geometry, and instead lead to the formation of highly anisotropic threads, which promote an open gel network. We confirm these results with simulations which include hydrodynamics. Based on three-point correlations, we propose a scale-resolved quantitative measure for the anisotropy of the gel structure. We find a strong discrepancy for interparticle distances just under twice the particle diameter between systems with and without hydrodynamics, quantifying the role of hydrodynamics from a structural point of view.
△ Less
Submitted 16 September, 2015; v1 submitted 21 June, 2015;
originally announced June 2015.
-
Shock formation in the dispersionless Kadomtsev-Petviashvili equation
Authors:
T. Grava,
C. Klein,
J. Eggers
Abstract:
The dispersionless Kadomtsev-Petviashvili (dKP) equation $(u_t+uu_x)_x=u_{yy}$ is one of the simplest nonlinear wave equations describing two-dimensional shocks. To solve the dKP equation we use a coordinate transformation inspired by the method of characteristics for the one-dimensional Hopf equation $u_t+uu_x=0$. We show numerically that the solutions to the transformed equation do not develop s…
▽ More
The dispersionless Kadomtsev-Petviashvili (dKP) equation $(u_t+uu_x)_x=u_{yy}$ is one of the simplest nonlinear wave equations describing two-dimensional shocks. To solve the dKP equation we use a coordinate transformation inspired by the method of characteristics for the one-dimensional Hopf equation $u_t+uu_x=0$. We show numerically that the solutions to the transformed equation do not develop shocks. This permits us to extend the dKP solution as the graph of a multivalued function beyond the critical time when the gradients blow up. This overturned solution is multivalued in a lip shape region in the $(x,y)$ plane, where the solution of the dKP equation exists in a weak sense only, and a shock front develops. A local expansion reveals the universal scaling structure of the shock, which after a suitable change of coordinates corresponds to a generic cusp catastrophe. We provide a heuristic derivation of the shock front position near the critical point for the solution of the dKP equation, and study the solution of the dKP equation when a small amount of dissipation is added. Using multiple-scale analysis, we show that in the limit of small dissipation and near the critical point of the dKP solution, the solution of the dissipative dKP equation converges to a Pearcey integral. We test and illustrate our results by detailed comparisons with numerical simulations of both the regularized equation, the dKP equation, and the asymptotic description given in terms of the Pearcey integral.
△ Less
Submitted 17 June, 2016; v1 submitted 24 May, 2015;
originally announced May 2015.
-
A general method to remove the stiffness of PDEs
Authors:
Laurent Duchemin,
Jens Eggers
Abstract:
A new method to remove the stiffness of partial differential equations is presented. Two terms are added to the right-hand-side of the PDE : the first is a dam** term and is treated implicitly, the second is of the opposite sign and is treated explicitly. A criterion for absolute stability is found and the scheme is shown to be convergent. The method is applied with success to the mean curvature…
▽ More
A new method to remove the stiffness of partial differential equations is presented. Two terms are added to the right-hand-side of the PDE : the first is a dam** term and is treated implicitly, the second is of the opposite sign and is treated explicitly. A criterion for absolute stability is found and the scheme is shown to be convergent. The method is applied with success to the mean curvature flow equation, the Kuramoto-Sivashinsky equation, and to the Rayleigh-Taylor instability in a Hele-Shaw cell, including the effect of surface tension.
△ Less
Submitted 7 August, 2013;
originally announced August 2013.
-
Identification of structure in condensed matter with the topological cluster classification
Authors:
Alex Malins,
Stephen R. Williams,
Jens Eggers,
C. Patrick Royall
Abstract:
We describe the topological cluster classification (TCC) algorithm. The TCC detects local structures with bond topologies similar to isolated clusters which minimise the potential energy for a number of monatomic and binary simple liquids with $m\leq13$ particles. We detail a modified Voronoi bond detection method that optimizes the cluster detection. The method to identify each cluster is outline…
▽ More
We describe the topological cluster classification (TCC) algorithm. The TCC detects local structures with bond topologies similar to isolated clusters which minimise the potential energy for a number of monatomic and binary simple liquids with $m\leq13$ particles. We detail a modified Voronoi bond detection method that optimizes the cluster detection. The method to identify each cluster is outlined, and a test example of Lennard-Jones liquid and crystal phases is considered and critically examined.
△ Less
Submitted 23 December, 2013; v1 submitted 21 July, 2013;
originally announced July 2013.
-
Investigating isomorphs with the topological cluster classification
Authors:
Alex Malins,
Jens Eggers,
C. Patrick Royall
Abstract:
Isomorphs are lines in the density-temperature plane of certain "strongly-correlating" or "Roskilde simple" liquids where two-point structure and dynamics have been shown to be close to identical up to a scale transformation. Here we consider such a liquid, a Lennard-Jones glassformer, and investigate the behavior along isomorphs of higher-order structural and dynamical correlations. We then consi…
▽ More
Isomorphs are lines in the density-temperature plane of certain "strongly-correlating" or "Roskilde simple" liquids where two-point structure and dynamics have been shown to be close to identical up to a scale transformation. Here we consider such a liquid, a Lennard-Jones glassformer, and investigate the behavior along isomorphs of higher-order structural and dynamical correlations. We then consider an inverse power law reference system mapped to the Lennard-Jones system [Pedersen et al., Phys. Rev. Lett. 105, 157801 (2010)]. Using the topological cluster classification to identify higher-order structures, in both systems we find bicapped square anti-prisms, which are known to be a locally favored structure in the Lennard-Jones glassformer. The population of these locally favored structures is up to 80% higher in the Lennard-Jones system than the equivalent inverse power law system. The structural relaxation time of the two systems, on the other hand, is almost identical, and the four-point dynamical susceptibility is marginally higher in the inverse power law system. Upon cooling the lifetime of the locally favored structures in the Lennard-Jones system are up to 40% higher relative to the reference system.
△ Less
Submitted 23 December, 2013; v1 submitted 21 July, 2013;
originally announced July 2013.
-
Lifetimes and Lengthscales of Structural Motifs in a Model Glassformer
Authors:
Alex Malins,
Jens Eggers,
Hajime Tanaka,
C. Patrick Royall
Abstract:
We use a newly-developed method to identify local structural motifs in a popular model glassformer, the Kob-Andersen binary Lennard-Jones mixture. By measuring the lifetimes of a zoo of clusters, we find that 11-membered bicapped square antiprisms, denoted as 11A, have longer lifetimes on average than other structures considered. Other long-lived clusters are similar in structure to the 11A cluste…
▽ More
We use a newly-developed method to identify local structural motifs in a popular model glassformer, the Kob-Andersen binary Lennard-Jones mixture. By measuring the lifetimes of a zoo of clusters, we find that 11-membered bicapped square antiprisms, denoted as 11A, have longer lifetimes on average than other structures considered. Other long-lived clusters are similar in structure to the 11A cluster. These clusters group into ramified networks that are correlated with slow particles and act to retard the motion of neighbouring particles. The structural lengthscale associated with these networks does not grow as fast as the dynamical lengthscale $ξ_4$ as the system is cooled, in the range of temperatures our molecular dynamics simulations access. Thus we find a strong, but indirect, correlation between static structural ordering and slow dynamics.
△ Less
Submitted 12 June, 2013;
originally announced June 2013.
-
Identification of long-lived clusters and their link to slow dynamics in a model glass former
Authors:
Alex Malins,
Jens Eggers,
C. Patrick Royall,
Stephen R. Williams,
Hajime Tanaka
Abstract:
We study the relationship between local structural ordering and dynamical heterogeneities in a model glass-forming liquid, the Wahnstrom mixture. A novel cluster-based approach is used to detect local energy minimum polyhedral clusters and local crystalline environments. A structure-specific time correlation function is then devised to determine their temporal stability. For our system, the lifeti…
▽ More
We study the relationship between local structural ordering and dynamical heterogeneities in a model glass-forming liquid, the Wahnstrom mixture. A novel cluster-based approach is used to detect local energy minimum polyhedral clusters and local crystalline environments. A structure-specific time correlation function is then devised to determine their temporal stability. For our system, the lifetime correlation function for icosahedral clusters decays far slower than for those of similarly sized but topologically distinct clusters. Upon cooling, the icosahedra form domains of increasing size and their lifetime increases with the size of the domains. Furthermore, these long-lived domains lower the mobility of neighboring particles. These structured domains show correlations with the slow regions of the dynamical heterogeneities that form on cooling towards the glass transition. Although icosahedral clusters with a particular composition and arrangement of large and small particles are structural elements of the crystal, we find that most icosahedral clusters lack such order in composition and arrangement and thus local crystalline ordering makes only a limited contribution to this process. Finally, we characterize the spatial correlation of the domains of icosahedra by two structural correlation lengths and compare them with the four-point dynamic correlation length. All the length scales increase upon cooling, but in different ways.
△ Less
Submitted 22 February, 2013; v1 submitted 8 March, 2012;
originally announced March 2012.
-
Local structure of Liquid-Vapour Interfaces
Authors:
Maia Godonoga,
Alex Malins,
Jens Eggers,
C. Patrick Royall
Abstract:
The structure of a simple liquid may be characterised in terms of ground state clusters of small numbers of atoms of that same liquid. Here we use this sensitive structural probe to consider the effect of a liquid-vapour interface upon the liquid structure. At higher temperatures (above around half the critical temperature) we find that the predominant effect of the interface is to reduce the loca…
▽ More
The structure of a simple liquid may be characterised in terms of ground state clusters of small numbers of atoms of that same liquid. Here we use this sensitive structural probe to consider the effect of a liquid-vapour interface upon the liquid structure. At higher temperatures (above around half the critical temperature) we find that the predominant effect of the interface is to reduce the local density, which significantly suppresses the local cluster populations. At lower temperatures, however, pronounced interfacial layering is found. This appears to be connected with significant orientational ordering of clusters based on 3- and 5-membered rings, with the rings aligning perpendicular and parallel to the interface respectively. At all temperatures, we find that the population of five-fold symmetric structures is suppressed, rather than enhanced, close to the interface.
△ Less
Submitted 14 February, 2011;
originally announced February 2011.
-
The effect of inter-cluster interactions on the structure of colloidal clusters
Authors:
Alex Malins,
Stephen R. Williams,
Jens Eggers,
Hajime Tanaka,
C. Patrick Royall
Abstract:
Colloidal systems present exciting opportunities to study clusters. Unlike atomic clusters, which are frequently produced at extremely low density, colloidal clusters may interact with one another. Here we consider the effect of such interactions on the intra-cluster structure in simulations of colloidal cluster fluids. A sufficient increase in density leads to a higher population of clusters in t…
▽ More
Colloidal systems present exciting opportunities to study clusters. Unlike atomic clusters, which are frequently produced at extremely low density, colloidal clusters may interact with one another. Here we consider the effect of such interactions on the intra-cluster structure in simulations of colloidal cluster fluids. A sufficient increase in density leads to a higher population of clusters in the ground state. In other words, inter-cluster interactions perturb the intra-cluster behaviour, such that each cluster may no longer be considered as an isolated system. Conversely, for dilute, weakly interacting cluster fluids little dependence on colloid concentration is observed, and we thus argue that it is reasonable to treat each cluster as an isolated system.
△ Less
Submitted 5 October, 2010;
originally announced October 2010.
-
Comment on ``Force Balance at the Transition from Selective Withdrawal to Viscous Entrainment
Authors:
J. Eggers,
S. Courrech du Pont
Abstract:
Comment on paper by Blanchette and Zhang, Phys. Rev. Lett. 102, 144501 (2009).
Comment on paper by Blanchette and Zhang, Phys. Rev. Lett. 102, 144501 (2009).
△ Less
Submitted 30 March, 2010;
originally announced March 2010.
-
The blistering of a viscoelastic filament of a droplet of saliva
Authors:
Christian Wagner,
Rainer Sattler,
Jens Eggers
Abstract:
A fluid dynamics video of the break up of a droplet of saliva is shown. First a viscoelastic filament is formed and than the blistering of this filament is shown. Finally, a flow induced phase separation takes place nanometer sized solid fiber remains that consist out of the biopolymers.
A fluid dynamics video of the break up of a droplet of saliva is shown. First a viscoelastic filament is formed and than the blistering of this filament is shown. Finally, a flow induced phase separation takes place nanometer sized solid fiber remains that consist out of the biopolymers.
△ Less
Submitted 22 September, 2009;
originally announced September 2009.
-
Geometric frustration in small colloidal clusters
Authors:
Alex Malins,
Stephen R. Williams,
Jens Eggers,
Hajime Tanaka,
C. Patrick Royall
Abstract:
We study the structure of clusters in a model colloidal system with competing interactions using Brownian dynamics simulations. A short-ranged attraction drives clustering, while a weak, long-ranged repulsion is used to model electrostatic charging in experimental systems. The former is treated with a short-ranged Morse attractive interaction, the latter with a repulsive Yukawa interaction. We c…
▽ More
We study the structure of clusters in a model colloidal system with competing interactions using Brownian dynamics simulations. A short-ranged attraction drives clustering, while a weak, long-ranged repulsion is used to model electrostatic charging in experimental systems. The former is treated with a short-ranged Morse attractive interaction, the latter with a repulsive Yukawa interaction. We consider the yield of clusters of specific structure as a function of the strength of the interactions, for clusters with m=3,4,5,6,7,10 and 13 colloids. At sufficient strengths of the attractive interaction (around 10 kT), the average bond lifetime approaches the simulation timescale and the system becomes nonergodic. For small clusters m<=5 where geometric frustration is not relevant, despite nonergodicity, for sufficient strengths of the attractive interaction the yield of clusters which maximise the number of bonds approaches 100%. However for $m=7$ and higher, in the nonergodic regime we find a lower yield of these structures where we argue geometric frustration plays a significant role. $m=6$ is a special case, where two structures, of octahedral and C2v symmetry compete, with the latter being favoured by entropic contributions in the ergodic regime and by kinetic trap** in the nonergodic regime. We believe that our results should be valid as far as the one-component description of the interaction potential is valid. A system with competing electrostatic repulsions and van der Waals attractions may be such an example. However, in some cases, the one-component description of the interaction potential may not be appropriate.
△ Less
Submitted 1 January, 2010; v1 submitted 17 September, 2009;
originally announced September 2009.
-
M-brane singularity formation
Authors:
Jens Eggers,
Jens Hoppe
Abstract:
We derive self-similar string solutions in a graph representation, near the point of singularity formation, which can be shown to extend to point-like singularities on M-branes, as well as to the radially symmetric case.
We derive self-similar string solutions in a graph representation, near the point of singularity formation, which can be shown to extend to point-like singularities on M-branes, as well as to the radially symmetric case.
△ Less
Submitted 9 December, 2008;
originally announced December 2008.
-
The role of self-similarity in singularities of PDE's
Authors:
Jens Eggers,
Marco A. Fontelos
Abstract:
We survey rigorous, formal, and numerical results on the formation of point-like singularities (or blow-up) for a wide range of evolution equations. We use a similarity transformation of the original equation with respect to the blow-up point, such that self-similar behaviour is mapped to the fixed point of a \textit{dynamical system}. We point out that analysing the dynamics close to the fixed…
▽ More
We survey rigorous, formal, and numerical results on the formation of point-like singularities (or blow-up) for a wide range of evolution equations. We use a similarity transformation of the original equation with respect to the blow-up point, such that self-similar behaviour is mapped to the fixed point of a \textit{dynamical system}. We point out that analysing the dynamics close to the fixed point is a useful way of characterising the singularity, in that the dynamics frequently reduces to very few dimensions. As far as we are aware, examples from the literature either correspond to stable fixed points, low-dimensional centre-manifold dynamics, limit cycles, or travelling waves. For each "class" of singularity, we give detailed examples.
△ Less
Submitted 7 December, 2008;
originally announced December 2008.
-
Vibration-induced climbing of drops
Authors:
P. Brunet,
J. Eggers,
R. D. Deegan
Abstract:
We report an experimental study of liquid drops moving against gravity, when placed on a vertically vibrating inclined plate, which is partially wetted by the drop. The frequency of vibrations ranges from 30 to 200 Hz, and, above a threshold in vibration acceleration, drops experience an upward motion. We attribute this surprising motion to the deformations of the drop, as a consequence of an up…
▽ More
We report an experimental study of liquid drops moving against gravity, when placed on a vertically vibrating inclined plate, which is partially wetted by the drop. The frequency of vibrations ranges from 30 to 200 Hz, and, above a threshold in vibration acceleration, drops experience an upward motion. We attribute this surprising motion to the deformations of the drop, as a consequence of an up or down symmetry breaking induced by the presence of the substrate. We relate the direction of motion to contact angle measurements. This phenomenon can be used to move a drop along an arbitrary path in a plane, without special surface treatments or localized forcing.
△ Less
Submitted 11 September, 2008;
originally announced September 2008.
-
Maximum size of drops levitated by an air cushion
Authors:
Jacco H. Snoeijer,
Philippe Brunet,
Jens Eggers
Abstract:
Liquid drops can be kept from touching a plane solid surface by a gas stream entering from underneath, as it is observed for water drops on a heated plate, kept aloft by a stream of water vapor. We investigate the limit of small flow rates, for which the size of the gap between the drop and the substrate becomes very small. Above a critical drop radius no stationary drops can exist, below the cr…
▽ More
Liquid drops can be kept from touching a plane solid surface by a gas stream entering from underneath, as it is observed for water drops on a heated plate, kept aloft by a stream of water vapor. We investigate the limit of small flow rates, for which the size of the gap between the drop and the substrate becomes very small. Above a critical drop radius no stationary drops can exist, below the critical radius two solutions coexist. However, only the solution with the smaller gap width is stable, the other is unstable. We compare to experimental data and use boundary integral simulations to show that unstable drops develop a gas "chimney" which breaks the drop in its middle.
△ Less
Submitted 3 September, 2008;
originally announced September 2008.
-
Rayleigh-Plateau instability causes the crown splash
Authors:
Robert D. Deegan,
Philippe Brunet,
Jens Eggers
Abstract:
The impact of a drop onto a liquid layer and the subsequent splash has important implications for diverse physical processes such as air-sea gas transfer, cooling, and combustion. In the {\it crown splash} parameter regime, the splash pattern is highly regular. We focus on this case as a model for the mechanism that leads to secondary droplets, and thus explain the drop size distribution resulti…
▽ More
The impact of a drop onto a liquid layer and the subsequent splash has important implications for diverse physical processes such as air-sea gas transfer, cooling, and combustion. In the {\it crown splash} parameter regime, the splash pattern is highly regular. We focus on this case as a model for the mechanism that leads to secondary droplets, and thus explain the drop size distribution resulting from the splash. We show that the mean number of secondary droplets is determined by the most unstable wavelength of the Rayleigh-Plateau instability. Variations from this mean are governed by the width of the spectrum. Our results for the crown splash will provide the basis for understanding more complicated splashes.
△ Less
Submitted 3 December, 2008; v1 submitted 18 June, 2008;
originally announced June 2008.
-
Thick films coating a plate withdrawn from a bath
Authors:
J. H. Snoeijer,
J. Ziegler,
B. Andreotti,
M. Fermigier,
J. Eggers
Abstract:
We consider the deposition of a film of viscous liquid on a flat plate being withdrawn from a bath, experimentally and theoretically. For any plate speed $U$, there is a range of ``thick'' film solutions whose thickness scales like $U^{1/2}$ for small $U$. These solutions are realized for a partially wetting liquid, while for a perfectly wetting liquid the classical Landau-Levich-Derjaguin (LLD)…
▽ More
We consider the deposition of a film of viscous liquid on a flat plate being withdrawn from a bath, experimentally and theoretically. For any plate speed $U$, there is a range of ``thick'' film solutions whose thickness scales like $U^{1/2}$ for small $U$. These solutions are realized for a partially wetting liquid, while for a perfectly wetting liquid the classical Landau-Levich-Derjaguin (LLD) film is observed, whose thickness scales like $U^{2/3}$. The thick film is distinguished from the LLD film by a dip in its spatial profile at the transition to the bath. We calculate the phase diagram for the existence of stationary film solutions as well as the film profiles, and find excellent agreement with experiment.
△ Less
Submitted 27 March, 2008;
originally announced March 2008.
-
A catalogue of singularities
Authors:
Jens Eggers,
Marco A. Fontelos
Abstract:
This paper is an attempt to classify finite-time singularities of PDEs. Most of the problems considered describe free-surface flows, which are easily observed experimentally. We consider problems where the singularity occurs at a point, and where typical scales of the solution shrink to zero as the singularity is approached. Upon a similarity transformation, exact self-similar behaviour is mappe…
▽ More
This paper is an attempt to classify finite-time singularities of PDEs. Most of the problems considered describe free-surface flows, which are easily observed experimentally. We consider problems where the singularity occurs at a point, and where typical scales of the solution shrink to zero as the singularity is approached. Upon a similarity transformation, exact self-similar behaviour is mapped to the fixed point of a {\it infinite dimensional dynamical system} representing the original dynamics. We show that the dynamics close to the fixed point is a useful way classifying the structure of the singularity. Specifically, we consider various types of stable and unstable fixed points, centre-manifold dynamics, limit cycles, and chaotic dynamics.
△ Less
Submitted 3 November, 2007;
originally announced November 2007.
-
Blistering of viscoelastic filaments
Authors:
R. Sattler,
J. Eggers,
C. Wagner
Abstract:
When a dilute polymer solution experiences capillary thinning, it forms an almost uniformly cylindrical thread, which we study experimentally. In the last stages of thinning, when polymers have become fully stretched, the filament becomes prone to instabilities, of which we describe two: A novel "breathing" instability, originating from the edge of the filament, and a sinusoidal instability in t…
▽ More
When a dilute polymer solution experiences capillary thinning, it forms an almost uniformly cylindrical thread, which we study experimentally. In the last stages of thinning, when polymers have become fully stretched, the filament becomes prone to instabilities, of which we describe two: A novel "breathing" instability, originating from the edge of the filament, and a sinusoidal instability in the interior, which ultimately gives rise to a "blistering" pattern of beads on the filament. We describe the linear instability with a spatial resolution of 80 nm in the disturbance amplitude. For sufficiently high polymer concentrations, the filament eventually separates out into a "solid" phase of entangled polymers, connected by fluid beads. A solid polymer fiber of about 100 nanometer thickness remains, which is essentially permanent.
△ Less
Submitted 19 September, 2007;
originally announced September 2007.
-
Film transitions of receding contact lines
Authors:
J. Ziegler,
J. H. Snoeijer,
J. Eggers
Abstract:
When a solid plate is withdrawn from a liquid bath, a receding contact line is formed where solid, liquid, and gas meet. Above a critical speed $U_{cr}$, a stationary contact line can no longer exist and the solid will eventually be covered completely by a liquid film. Here we show that the bifurcation diagram of this coating transition changes qualitatively, from discontinuous to continuous, wh…
▽ More
When a solid plate is withdrawn from a liquid bath, a receding contact line is formed where solid, liquid, and gas meet. Above a critical speed $U_{cr}$, a stationary contact line can no longer exist and the solid will eventually be covered completely by a liquid film. Here we show that the bifurcation diagram of this coating transition changes qualitatively, from discontinuous to continuous, when decreasing the inclination angle of the plate. We show that this effect is governed by the presence of capillary waves, illustrating that the large scale flow strongly effects the maximum speed of dewetting.
△ Less
Submitted 19 June, 2007;
originally announced June 2007.
-
Theory of the collapsing axisymmetric cavity
Authors:
J. Eggers,
M. A. Fontelos,
D. Leppinen,
J. H. Snoeijer
Abstract:
We investigate the collapse of an axisymmetric cavity or bubble inside a fluid of small viscosity, like water. Any effects of the gas inside the cavity as well as of the fluid viscosity are neglected. Using a slender-body description, we show that the minimum radius of the cavity scales like $h_0 \propto t'^α$, where $t'$ is the time from collapse. The exponent $α$ very slowly approaches a unive…
▽ More
We investigate the collapse of an axisymmetric cavity or bubble inside a fluid of small viscosity, like water. Any effects of the gas inside the cavity as well as of the fluid viscosity are neglected. Using a slender-body description, we show that the minimum radius of the cavity scales like $h_0 \propto t'^α$, where $t'$ is the time from collapse. The exponent $α$ very slowly approaches a universal value according to $α=1/2 + 1/(4\sqrt{-\ln(t')})$. Thus, as observed in a number of recent experiments, the scaling can easily be interpreted as evidence of a single non-trivial scaling exponent. Our predictions are confirmed by numerical simulations.
△ Less
Submitted 18 October, 2006;
originally announced October 2006.
-
To knot or not to knot
Authors:
J. Hickford,
R. Jones,
S. Courrech du Pont,
J. Eggers
Abstract:
We study the formation of knots on a macroscopic ball-chain, which is shaken on a horizontal plate at 12 times the acceleration of gravity. We find that above a certain critical length, the knotting probability is independent of chain length, while the time to shake out a knot increases rapidly with chain length. The probability if finding a knot after a certain time is the result of the balance…
▽ More
We study the formation of knots on a macroscopic ball-chain, which is shaken on a horizontal plate at 12 times the acceleration of gravity. We find that above a certain critical length, the knotting probability is independent of chain length, while the time to shake out a knot increases rapidly with chain length. The probability if finding a knot after a certain time is the result of the balance of these two processes. In particular, the knotting probability tends to a constant for long chains.
△ Less
Submitted 28 July, 2006;
originally announced July 2006.