-
Soft X-ray prompt emission from a high-redshift gamma-ray burst EP240315a
Authors:
Y. Liu,
H. Sun,
D. Xu,
D. S. Svinkin,
J. Delaunay,
N. R. Tanvir,
H. Gao,
C. Zhang,
Y. Chen,
X. -F. Wu,
B. Zhang,
W. Yuan,
J. An,
G. Bruni,
D. D. Frederiks,
G. Ghirlanda,
J. -W. Hu,
A. Li,
C. -K. Li,
J. -D. Li,
D. B. Malesani,
L. Piro,
G. Raman,
R. Ricci,
E. Troja
, et al. (170 additional authors not shown)
Abstract:
Long gamma-ray bursts (GRBs) are believed to originate from core collapse of massive stars. High-redshift GRBs can probe the star formation and reionization history of the early universe, but their detection remains rare. Here we report the detection of a GRB triggered in the 0.5--4 keV band by the Wide-field X-ray Telescope (WXT) on board the Einstein Probe (EP) mission, designated as EP240315a,…
▽ More
Long gamma-ray bursts (GRBs) are believed to originate from core collapse of massive stars. High-redshift GRBs can probe the star formation and reionization history of the early universe, but their detection remains rare. Here we report the detection of a GRB triggered in the 0.5--4 keV band by the Wide-field X-ray Telescope (WXT) on board the Einstein Probe (EP) mission, designated as EP240315a, whose bright peak was also detected by the Swift Burst Alert Telescope and Konus-Wind through off-line analyses. At a redshift of $z=4.859$, EP240315a showed a much longer and more complicated light curve in the soft X-ray band than in gamma-rays. Benefiting from a large field-of-view ($\sim$3600 deg$^2$) and a high sensitivity, EP-WXT captured the earlier engine activation and extended late engine activity through a continuous detection. With a peak X-ray flux at the faint end of previously known high-$z$ GRBs, the detection of EP240315a demonstrates the great potential for EP to study the early universe via GRBs.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
Automated Identification and Tracking of Deformation Twin Structures in Molecular Dynamics Simulations
Authors:
H. J. Ehrich,
A. Dollmann,
P. G. Grützmacher,
C. Gachot,
S. J. Eder
Abstract:
Deformation twinning significantly influences the microstructure, texture, and mechanical properties of metals, necessitating comprehensive studies of twin formation and interactions. While experimental methods excel at analyzing individual samples, they often lack the capability for temporal analysis of twinned structures. Molecular dynamics simulations offer a temporal dimension, yet the absence…
▽ More
Deformation twinning significantly influences the microstructure, texture, and mechanical properties of metals, necessitating comprehensive studies of twin formation and interactions. While experimental methods excel at analyzing individual samples, they often lack the capability for temporal analysis of twinned structures. Molecular dynamics simulations offer a temporal dimension, yet the absence of suitable tools for automated crystal twin identification has been a significant limitation. In this article, we introduce a novel computational tool integrated into the visualization and analysis software OVITO. Our tool automates the identification of coherent twin boundaries, links related twin boundaries, validates twin structures through orientation analysis, and tracks twins over time, providing quantifiable data and enabling in-depth investigations. Validation on a copper single crystal under shear loading demonstrates successful tracking of various twins, revealing their genesis and growth over multiple timesteps. This innovative approach promises to advance the computational materials science domain by facilitating the study of deformation twinning, offering profound insights into the behavior and mechanical performance of materials.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Deformation twins as a probe for tribologically induced stress states
Authors:
Antje Dollmann,
Christian Kuebel,
Vahid Tavakolli,
Stefan J. Eder,
Michael Feuerbacher,
Tim Liening,
Alexander Kauffmann,
Julia Rau,
Christian Greiner
Abstract:
Friction and wear of metals are critically influenced by the microstructures of the bodies constituting the tribological contact. Understanding the microstructural evolution taking place over the lifetime of a tribological system therefore is crucial for strategically designing tribological systems with tailored friction and wear properties. Here, we focus on single-crystalline CoCrFeMnNi that is…
▽ More
Friction and wear of metals are critically influenced by the microstructures of the bodies constituting the tribological contact. Understanding the microstructural evolution taking place over the lifetime of a tribological system therefore is crucial for strategically designing tribological systems with tailored friction and wear properties. Here, we focus on single-crystalline CoCrFeMnNi that is prone to form twins at room temperature. Deformation twins feature a pronounced orientation dependence with a tension-compression anisotropy, a distinct strain release in an extended volume and robust onset stresses. This makes deformation twinning an ideal probe to experimentally investigate the complex stress fields occurring in a tribological contact. Our results clearly show a grain orientation dependence of twinning under tribological load. Unexpectedly, neither the crystal direction parallel to the sliding nor the normal direction are solely decisive for twinning. This experimental approach is ideal to experimentally validate tribological stress field models, as is demonstrates here.
△ Less
Submitted 5 September, 2023;
originally announced September 2023.
-
Dislocation-mediated and twinning-induced plasticity of CoCrFeMnNi in varying tribological loading scenarios
Authors:
Antje Dollmann,
Alexander Kauffmann,
Martin Heilmaier,
Aditya Srinivasan Tirunilai,
Lakshmi Sravani Mantha,
Christian Kübel,
Stefan J. Eder,
Johannes Schneider,
Christian Greiner
Abstract:
Coarse-grained, metallic materials undergo microstructure refinement during tribological loading. This in turn results in changing tribological properties, so understanding deformation under tribological load is mandatory when designing tribological systems. Single-trace experiments were conducted to understand the initiation of deformation mechanisms acting in various tribological systems. The ma…
▽ More
Coarse-grained, metallic materials undergo microstructure refinement during tribological loading. This in turn results in changing tribological properties, so understanding deformation under tribological load is mandatory when designing tribological systems. Single-trace experiments were conducted to understand the initiation of deformation mechanisms acting in various tribological systems. The main scope of this work was to investigate the influence of normal and friction forces as well as crystal orientations on the dominating deformation mechanism in a face-centred cubic concentrated solid solution. While varying the normal force is easily realised, varying friction forces were achieved by using several counter body materials paired against CoCrFeMnNi. The subsurface deformation layer was either mediated through dislocation slip or twinning, depending on the grain orientation and on the tribological system. A layer dominated by dislocation-based deformation is characterised by lattice rotation, the formation of a dislocation trace line or subgrain formation. Such behaviour is observed for tribological systems with a low friction coefficient. For systems dominated by deformation twinning, three types of twin appearance were observed: small twins interacting with the surface, large twins and grains with two active twin systems. Two different twinning mechanisms are discussed as responsible for these characteristics.
△ Less
Submitted 12 November, 2021;
originally announced November 2021.
-
The SRG X-ray orbital observatory, its telescopes and first scientific results
Authors:
R. Sunyaev,
V. Arefiev,
V. Babyshkin,
A. Bogomolov,
K. Borisov,
M. Buntov,
H. Brunner,
R. Burenin,
E. Churazov,
D. Coutinho,
J. Eder,
N. Eismont,
M. Freyberg,
M. Gilfanov,
P. Gureyev,
G. Hasinger,
I. Khabibullin,
V. Kolmykov,
S. Komovkin,
R. Krivonos,
I. Lapshov,
V. Levin,
I. Lomakin,
A. Lutovinov,
P. Medvedev
, et al. (17 additional authors not shown)
Abstract:
The orbital observatory Spectrum-Roentgen-Gamma (SRG), equipped with the grazing-incidence X-ray telescopes Mikhail Pavlinsky ART-XC and eROSITA, was launched by Roscosmos to the Lagrange L2 point of the Sun-Earth system on July 13, 2019. The launch was carried out from the Baikonur Cosmodrome by a Proton-M rocket with a DM-03 upper stage. The German telescope eROSITA was installed on SRG under an…
▽ More
The orbital observatory Spectrum-Roentgen-Gamma (SRG), equipped with the grazing-incidence X-ray telescopes Mikhail Pavlinsky ART-XC and eROSITA, was launched by Roscosmos to the Lagrange L2 point of the Sun-Earth system on July 13, 2019. The launch was carried out from the Baikonur Cosmodrome by a Proton-M rocket with a DM-03 upper stage. The German telescope eROSITA was installed on SRG under an agreement between Roskosmos and the DLR, the German Aerospace Agency. In December 2019, SRG started to perform its main scientific task: scanning the celestial sphere to obtain X-ray maps of the entire sky in several energy ranges (from 0.2 to 8 keV with eROSITA, and from 4 to 30 keV with ART-XC). By mid-June 2021, the third six-month all-sky survey had been completed. Over a period of four years, it is planned to obtain eight independent maps of the entire sky in each of the energy ranges. The sum of these maps will provide high sensitivity and reveal more than three million quasars and over one hundred thousand massive galaxy clusters and galaxy groups. The availability of eight sky maps will enable monitoring of long-term variability (every six months) of a huge number of extragalactic and Galactic X-ray sources, including hundreds of thousands of stars with hot coronae. The rotation of the satellite around the axis directed toward the Sun with a period of four hours enables tracking the faster variability of bright X-ray sources during one day every half year. The chosen strategy of scanning the sky leads to the formation of deep survey zones near both ecliptic poles. The paper presents sky maps obtained by the telescopes on board SRG during the first survey of the entire sky and a number of results of deep observations performed during the flight to the L2 point in the frame of the performance verification program.(Abriged)
△ Less
Submitted 17 December, 2021; v1 submitted 27 April, 2021;
originally announced April 2021.
-
The eROSITA X-ray telescope on SRG
Authors:
P. Predehl,
R. Andritschke,
V. Arefiev,
V. Babyshkin,
O. Batanov,
W. Becker,
H. Böhringer,
A. Bogomolov,
T. Boller,
K. Borm,
W. Bornemann,
H. Bräuninger,
M. Brüggen,
H. Brunner,
M. Brusa,
E. Bulbul,
M. Buntov,
V. Burwitz,
W. Burkert,
N. Clerc,
E. Churazov,
D. Coutinho,
T. Dauser,
K. Dennerl,
V. Doroshenko
, et al. (68 additional authors not shown)
Abstract:
eROSITA (extended ROentgen Survey with an Imaging Telescope Array) is the primary instrument on the Spectrum-Roentgen-Gamma (SRG) mission, which was successfully launched on July 13, 2019, from the Baikonour cosmodrome. After the commissioning of the instrument and a subsequent calibration and performance verification phase, eROSITA started a survey of the entire sky on December 13, 2019. By the e…
▽ More
eROSITA (extended ROentgen Survey with an Imaging Telescope Array) is the primary instrument on the Spectrum-Roentgen-Gamma (SRG) mission, which was successfully launched on July 13, 2019, from the Baikonour cosmodrome. After the commissioning of the instrument and a subsequent calibration and performance verification phase, eROSITA started a survey of the entire sky on December 13, 2019. By the end of 2023, eight complete scans of the celestial sphere will have been performed, each lasting six months. At the end of this program, the eROSITA all-sky survey in the soft X-ray band (0.2--2.3\,keV) will be about 25 times more sensitive than the ROSAT All-Sky Survey, while in the hard band (2.3--8\,keV) it will provide the first ever true imaging survey of the sky. The eROSITA design driving science is the detection of large samples of galaxy clusters up to redshifts $z>1$ in order to study the large-scale structure of the universe and test cosmological models including Dark Energy. In addition, eROSITA is expected to yield a sample of a few million AGNs, including obscured objects, revolutionizing our view of the evolution of supermassive black holes. The survey will also provide new insights into a wide range of astrophysical phenomena, including X-ray binaries, active stars, and diffuse emission within the Galaxy. Results from early observations, some of which are presented here, confirm that the performance of the instrument is able to fulfil its scientific promise. With this paper, we aim to give a concise description of the instrument, its performance as measured on ground, its operation in space, and also the first results from in-orbit measurements.
△ Less
Submitted 7 October, 2020;
originally announced October 2020.
-
Report on Data Quality in Biobanks: Problems, Issues, State-of-the-Art
Authors:
Suneth Ranasinghe,
Horst Pichler,
Johann Eder
Abstract:
This report discusses the issues of data quality in biobanks. It presents the state-of-the-art in data quality: the definition of data quality, the dimensions of data quality, and the quality management system for achieving or describing the aspired data quality characteristics and we present and discuss all elements for such a data quality management system. In depth, we discuss the requirements…
▽ More
This report discusses the issues of data quality in biobanks. It presents the state-of-the-art in data quality: the definition of data quality, the dimensions of data quality, and the quality management system for achieving or describing the aspired data quality characteristics and we present and discuss all elements for such a data quality management system. In depth, we discuss the requirements and the context of data quality for biobanks in particular, where we argue that biobanks can be seen as data brokers, where the indented use of the data is to support the search for suitable material and data in the preparation of medical studies. For such an intended use, the quality of the metadata is of high importance and biobanks have to emphasize to strive for adequate documentation of the quality of the data annotating the samples.
△ Less
Submitted 17 December, 2018;
originally announced December 2018.
-
Thermostat Influence on the Structural Development and Material Removal during Abrasion of Nanocrystalline Ferrite
Authors:
Stefan J. Eder,
Ulrike Cihak-Bayr,
Davide Bianchi,
Gregor Feldbauer,
Gerhard Betz
Abstract:
We consider a nanomachining process of hard, abrasive particles grinding on the rough surface of a polycrystalline ferritic work piece. Using extensive large-scale molecular dynamics (MD) simulations, we show that the mode of thermostatting, i.e., the way that the heat generated through deformation and friction is removed from the system, has crucial impact on tribological and materials related ph…
▽ More
We consider a nanomachining process of hard, abrasive particles grinding on the rough surface of a polycrystalline ferritic work piece. Using extensive large-scale molecular dynamics (MD) simulations, we show that the mode of thermostatting, i.e., the way that the heat generated through deformation and friction is removed from the system, has crucial impact on tribological and materials related phenomena. By adopting an electron-phonon coupling approach to parametrize the thermostat of the system, thus including the electronic contribution to the thermal conductivity of iron, we can reproduce the experimentally measured values that yield realistic temperature gradients in the work piece. We compare these results to those obtained by assuming the two extreme cases of only phononic heat conduction and instantaneous removal of the heat generated in the machining interface. Our discussion of the differences between these three cases reveals that although the average shear stress is virtually temperature independent up to a normal pressure of approximately 1 GPa, the grain and chip morphology as well as most relevant quantities depend heavily on the mode of thermostatting beyond a normal pressure of 0.4 GPa. These pronounced differences can be explained by the thermally activated processes that guide the reaction of the Fe lattice to the external mechanical and thermal loads caused by nanomachining.
△ Less
Submitted 14 April, 2017;
originally announced April 2017.
-
The Wide Field Imager Instrument for Athena
Authors:
Norbert Meidinger,
Josef Eder,
Tanja Eraerds,
Kirpal Nandra,
Daniel Pietschner,
Markus Plattner,
Arne Rau,
Rafael Strecker
Abstract:
The WFI (Wide Field Imager) instrument is planned to be one of two complementary focal plane cameras on ESA's next X-ray observatory Athena. It combines unprecedented survey power through its large field of view of 40 amin x 40 amin together with excellent count rate capability (larger than 1 Crab). The energy resolution of the silicon sensor is state-of-the-art in the energy band of interest from…
▽ More
The WFI (Wide Field Imager) instrument is planned to be one of two complementary focal plane cameras on ESA's next X-ray observatory Athena. It combines unprecedented survey power through its large field of view of 40 amin x 40 amin together with excellent count rate capability (larger than 1 Crab). The energy resolution of the silicon sensor is state-of-the-art in the energy band of interest from 0.2 keV to 15 keV, e.g. the full width at half maximum of a line at 7 keV will be better than 170 eV until the end of the nominal mission phase. This performance is accomplished by using DEPFET active pixel sensors with a pixel size of 130 x 130 microns is well suited to the on-axis angular resolution of 5 arcsec half energy width (HEW) of the mirror system. Each DEPFET pixel is a combined sensor-amplifier structure with a MOSFET integrated onto a fully depleted 450 micron thick silicon bulk. Two detectors are planned for the WFI instrument: A large-area detector comprising four sensors with a total of 1024 x 1024 pixels and a fast detector optimized for high count rate observations. This high count rate capable detector permits for bright point sources with an intensity of 1 Crab a throughput of more than 80% and a pile-up of less than 1 %. The fast readout of the DEPFET pixel matrices is facilitated by an ASIC development, called VERITAS-2. Together with the Switcher-A, a control ASIC that allows for operation of the DEPFET in rolling shutter mode, these elements form the key components of the WFI detectors. The detectors are surrounded by a graded-Z shield, which has in particular the purpose to avoid fluorescence lines that would contribute to the instrument background...[Abridged]
△ Less
Submitted 3 February, 2017;
originally announced February 2017.
-
Adaptive Distributed Top-k Query Processing
Authors:
Claus Dabringer,
Johann Eder
Abstract:
ADiT is an adaptive approach for processing distributed top-$k$ queries over peer-to-peer networks optimizing both system load and query response time. This approach considers the size of the peer to peer network, the amount $k$ of searched objects, the network capabilities of a connected peer, i.e. the transmission rate, the amount of objects stored on each peer, and the speed of a peer in proces…
▽ More
ADiT is an adaptive approach for processing distributed top-$k$ queries over peer-to-peer networks optimizing both system load and query response time. This approach considers the size of the peer to peer network, the amount $k$ of searched objects, the network capabilities of a connected peer, i.e. the transmission rate, the amount of objects stored on each peer, and the speed of a peer in processing a local top-$k$ query. In extensive experiments with a variety of scenarios we could show that ADiT outperforms state of the art distributed query processing techniques.
△ Less
Submitted 6 June, 2016;
originally announced June 2016.
-
Effects of van der Waals Interactions in the Adsorption of Isooctane and Ethanol on Fe(100) Surfaces
Authors:
Pedro O. Bedolla,
Gregor Feldbauer,
Michael Wolloch,
Stefan J. Eder,
Nicole Dörr,
Peter Mohn,
Josef Redinger,
András Vernes
Abstract:
Van der Waals (vdW) forces play a fundamental role in the structure and behavior of diverse systems. Thanks to development of functionals that include non-local correlation, it is possible to study the effects of vdW interactions in systems of industrial and tribological interest. Here we simulated within the framework of density functional theory (DFT) the adsorption of isooctane (2,2,4-trimethyl…
▽ More
Van der Waals (vdW) forces play a fundamental role in the structure and behavior of diverse systems. Thanks to development of functionals that include non-local correlation, it is possible to study the effects of vdW interactions in systems of industrial and tribological interest. Here we simulated within the framework of density functional theory (DFT) the adsorption of isooctane (2,2,4-trimethylpentane) and ethanol on a Fe(100) surface, employing various exchange-correlation functionals to take vdW forces into account. In particular, this paper discusses the effect of vdW forces on the magnitude of adsorption energies, equilibrium geometries and their role in the binding mechanism. According to our calculations, vdW interactions increase the adsorption energies and reduce the equilibrium distances. Nevertheless, they do not influence the spatial configuration of the adsorbed molecules. Their effect on the electronic density is a non-isotropic, delocalized accumulation of charge between the molecule and the slab. In conclusion, vdW forces are essential for the adsorption of isooctane and ethanol on a bcc Fe(100) surface.
△ Less
Submitted 15 May, 2014; v1 submitted 9 May, 2014;
originally announced May 2014.
-
The Interface Region Imaging Spectrograph (IRIS)
Authors:
B. De Pontieu,
A. M. Title,
J. Lemen,
G. D. Kushner,
D. J. Akin,
B. Allard,
T. Berger,
P. Boerner,
M. Cheung,
C. Chou,
J. F. Drake,
D. W. Duncan,
S. Freeland,
G. F. Heyman,
C. Hoffman,
N. E. Hurlburt,
R. W. Lindgren,
D. Mathur,
R. Rehse,
D. Sabolish,
R. Seguin,
C. J. Schrijver,
T. D. Tarbell,
J. -P. Wuelser,
C. J. Wolfson
, et al. (63 additional authors not shown)
Abstract:
The Interface Region Imaging Spectrograph (IRIS) small explorer spacecraft provides simultaneous spectra and images of the photosphere, chromosphere, transition region, and corona with 0.33-0.4 arcsec spatial resolution, 2 s temporal resolution and 1 km/s velocity resolution over a field-of-view of up to 175 arcsec x 175 arcsec. IRIS was launched into a Sun-synchronous orbit on 27 June 2013 using…
▽ More
The Interface Region Imaging Spectrograph (IRIS) small explorer spacecraft provides simultaneous spectra and images of the photosphere, chromosphere, transition region, and corona with 0.33-0.4 arcsec spatial resolution, 2 s temporal resolution and 1 km/s velocity resolution over a field-of-view of up to 175 arcsec x 175 arcsec. IRIS was launched into a Sun-synchronous orbit on 27 June 2013 using a Pegasus-XL rocket and consists of a 19-cm UV telescope that feeds a slit-based dual-bandpass imaging spectrograph. IRIS obtains spectra in passbands from 1332-1358, 1389-1407 and 2783-2834 Angstrom including bright spectral lines formed in the chromosphere (Mg II h 2803 Angstrom and Mg II k 2796 Angstrom) and transition region (C II 1334/1335 Angstrom and Si IV 1394/1403 Angstrom). Slit-jaw images in four different passbands (C II 1330, Si IV 1400, Mg II k 2796 and Mg II wing 2830 Angstrom) can be taken simultaneously with spectral rasters that sample regions up to 130 arcsec x 175 arcsec at a variety of spatial samplings (from 0.33 arcsec and up). IRIS is sensitive to emission from plasma at temperatures between 5000 K and 10 MK and will advance our understanding of the flow of mass and energy through an interface region, formed by the chromosphere and transition region, between the photosphere and corona. This highly structured and dynamic region not only acts as the conduit of all mass and energy feeding into the corona and solar wind, it also requires an order of magnitude more energy to heat than the corona and solar wind combined. The IRIS investigation includes a strong numerical modeling component based on advanced radiative-MHD codes to facilitate interpretation of observations of this complex region. Approximately eight Gbytes of data (after compression) are acquired by IRIS each day and made available for unrestricted use within a few days of the observation.
△ Less
Submitted 10 January, 2014;
originally announced January 2014.
-
Discovery of 10 pulsars in an Arecibo drift-scan survey
Authors:
D. R. Lorimer,
K. M. Xilouris,
A. S. Fruchter,
I. H. Stairs,
F. Camilo,
A. M. Vazquez,
J. A. Eder,
M. A. McLaughlin,
M. S. E. Roberts,
J. W. T. Hessels,
S. M. Ransom
Abstract:
We present the results of a 430-MHz survey for pulsars conducted during the upgrade to the 305-m Arecibo radio telescope. Our survey covered a total of 1147 square degrees of sky using a drift-scan technique. We detected 33 pulsars, 10 of which were not known prior to the survey observations. The highlight of the new discoveries is PSR J0407+1607, which has a spin period of 25.7 ms, a characteri…
▽ More
We present the results of a 430-MHz survey for pulsars conducted during the upgrade to the 305-m Arecibo radio telescope. Our survey covered a total of 1147 square degrees of sky using a drift-scan technique. We detected 33 pulsars, 10 of which were not known prior to the survey observations. The highlight of the new discoveries is PSR J0407+1607, which has a spin period of 25.7 ms, a characteristic age of 1.5 Gyr and is in a 1.8-yr orbit about a low-mass (>0.2 Msun) companion. The long orbital period and small eccentricity (e = 0.0009) make the binary system an important new addition to the ensemble of binary pulsars suitable to test for violations of the strong equivalence principle. We also report on our initially unsuccessful attempts to detect optically the companion to J0407+1607 which imply that its absolute visual magnitude is > 12.1. If, as expected on evolutionary grounds, the companion is an He white dwarf, our non-detection imples a cooling age of least 1 Gyr.
△ Less
Submitted 1 April, 2005;
originally announced April 2005.
-
First Experiences Integrating PC Distributed I/O Into Argonne's ATLAS Control System
Authors:
F. H. Munson,
D. E. R. Quock,
S. L. Dean,
K. J. Eder
Abstract:
First Experiences Integrating PC Distributed I/O Into Argonne's ATLAS Control System The roots of ATLAS (Argonne Tandem-Linac Accelerator System) date back to the early 1960s. Located at the Argonne National Laboratory, the accelerator has been designated a National User Facility, which focuses primarily on heavy-ion nuclear physics. Like the accelerator it services, the control system has been…
▽ More
First Experiences Integrating PC Distributed I/O Into Argonne's ATLAS Control System The roots of ATLAS (Argonne Tandem-Linac Accelerator System) date back to the early 1960s. Located at the Argonne National Laboratory, the accelerator has been designated a National User Facility, which focuses primarily on heavy-ion nuclear physics. Like the accelerator it services, the control system has been in a constant state of evolution. The present real-time portion of the control system is based on the commercial product Vsystem [1]. While Vsystem has always been capable of distributed I/O processing, the latest offering of this product provides for the use of relatively inexpensive PC hardware and software. This paper reviews the status of the ATLAS control system, and describes first experiences with PC distributed I/O.
△ Less
Submitted 8 November, 2001;
originally announced November 2001.
-
The Relational Database Aspects of Argonne's ATLAS Control System
Authors:
D. E. R. Quock,
F. H. Munson,
K. J. Eder,
S. L. Dean
Abstract:
The Relational Database Aspects of Argonnes ATLAS Control System Argonnes ATLAS (Argonne Tandem Linac Accelerator System) control system comprises two separate database concepts. The first is the distributed real-time database structure provided by the commercial product Vsystem [1]. The second is a more static relational database archiving system designed by ATLAS personnel using Oracle Rdb [2]…
▽ More
The Relational Database Aspects of Argonnes ATLAS Control System Argonnes ATLAS (Argonne Tandem Linac Accelerator System) control system comprises two separate database concepts. The first is the distributed real-time database structure provided by the commercial product Vsystem [1]. The second is a more static relational database archiving system designed by ATLAS personnel using Oracle Rdb [2] and Paradox [3] software. The configuration of the ATLAS facility has presented a unique opportunity to construct a control system relational database that is capable of storing and retrieving complete archived tune-up configurations for the entire accelerator. This capability has been a major factor in allowing the facility to adhere to a rigorous operating schedule. Most recently, a Web-based operator interface to the control systems Oracle Rdb database has been installed. This paper explains the history of the ATLAS database systems, how they interact with each other, the design of the new Web-based operator interface, and future plans.
△ Less
Submitted 1 November, 2001;
originally announced November 2001.
-
Gas Mass Fractions and the Evolution of LSB Dwarf Galaxies
Authors:
J. Schombert,
S. McGaugh,
J. Eder
Abstract:
The optical and HI properties for a sample of low surface brightness (LSB) dwarf galaxies, cataloged from the Second Palomar Sky Survey, is presented. Gas mass fractions for LSB dwarfs reach the highest levels of any know galaxy type (f_g=95%) confirming that their low stellar densities are due to inefficient conversion of gas mass into stellar mass. Comparison with star formation models indicat…
▽ More
The optical and HI properties for a sample of low surface brightness (LSB) dwarf galaxies, cataloged from the Second Palomar Sky Survey, is presented. Gas mass fractions for LSB dwarfs reach the highest levels of any know galaxy type (f_g=95%) confirming that their low stellar densities are due to inefficient conversion of gas mass into stellar mass. Comparison with star formation models indicates that the blue optical colors of LSB dwarfs is not due to low metallicity or recent star formation and can only be explained by a dominant stellar population that is less than 5 Gyrs in mean age. If star formation occurs in OB complexes, similar to normal galaxies, then LSB dwarfs must undergo weak bursts traveling over the extent of the galaxy to maintain their LSB nature, which contributes to their irregular morphological appearance.
△ Less
Submitted 25 January, 2001;
originally announced January 2001.
-
Gas Rich Dwarfs from the PSS-II III. HI Profiles and Dynamical Masses
Authors:
Jo Ann Eder,
James Schombert
Abstract:
We present Arecibo neutral hydrogen data on a sample of optically selected dwarf galaxies. The sample ranges in HI mass from 10^6 M_sun to 5x10^9 M_sun, with a mean of 7.9x10^8 M_sun. Using estimated HI radii, the HI surface densities range from 0.6 to 20 M_sun pc^-2, all well below the critical threshold for star formation (Kennicutt 1998). M_HI/L values of the LSB dwarfs range from 0.3 to 12 w…
▽ More
We present Arecibo neutral hydrogen data on a sample of optically selected dwarf galaxies. The sample ranges in HI mass from 10^6 M_sun to 5x10^9 M_sun, with a mean of 7.9x10^8 M_sun. Using estimated HI radii, the HI surface densities range from 0.6 to 20 M_sun pc^-2, all well below the critical threshold for star formation (Kennicutt 1998). M_HI/L values of the LSB dwarfs range from 0.3 to 12 with a mean value of 2.0. Dynamical masses, calculated from the HI profile widths, range from 10^8 M_sun to 10^11 M_sun. There is a strong correlation between optical luminosity and dynamical mass for LSB dwarfs implying that the dark matter (whether baryonic or non-baryonic) follows the detectable baryonic matter.
△ Less
Submitted 20 June, 2000;
originally announced June 2000.
-
Slow pulsars from the STScI/NAIC drift scan search
Authors:
K. Xilouris,
A. Fruchter,
D. R. Lorimer,
J. Eder,
A. Vazquez
Abstract:
The unique sensitivity of the Arecibo telescope at 430 MHz motivated a drift scan search of the visible sky divided up into eight declination strips. Based on an analysis of the data collected in the region assigned to us, eight new long-period pulsars have so far been discovered.
The unique sensitivity of the Arecibo telescope at 430 MHz motivated a drift scan search of the visible sky divided up into eight declination strips. Based on an analysis of the data collected in the region assigned to us, eight new long-period pulsars have so far been discovered.
△ Less
Submitted 9 November, 1999; v1 submitted 2 November, 1999;
originally announced November 1999.
-
Gas-Rich Dwarf Galaxies from the PSS-II --- II. Optical Properties
Authors:
R. A. Pildis,
J. M. Schombert,
J. Eder
Abstract:
We describe the optical properties of a sample of 101 gas-rich field dwarf galaxies found on PSS-II (Second Palomar Sky Survey) plates, most newly discovered as part of a survey to investigate the clustering properties of dwarf galaxies relative to giants. These galaxies have low surface brightnesses and are relatively distant, with recession velocities ranging up to 10,000 km/s. They have bluer…
▽ More
We describe the optical properties of a sample of 101 gas-rich field dwarf galaxies found on PSS-II (Second Palomar Sky Survey) plates, most newly discovered as part of a survey to investigate the clustering properties of dwarf galaxies relative to giants. These galaxies have low surface brightnesses and are relatively distant, with recession velocities ranging up to 10,000 km/s. They have bluer V-I colors (median value of 0.75) than either actively star-forming giant galaxies or low metallicity globular clusters, implying that these dwarfs have both low metallicities and little past star formation. These galaxies are also extremely gas rich, with a median HI mass to V luminosity ratio of approximately 2 in solar units. We divide the sample into two groups: true dwarfs with diameters (at 25 I mag arcsec^-2) less than 7.5 kpc and Magellanic dwarfs with diameters greater than that value. The true dwarfs have greater HI mass to V luminosity ratios and slightly bluer V-I colors than the Magellanic dwarfs. Overall, the optical properties of our sample of dwarf galaxies point towards their being quiescent objects that have undergone little star formation over the age of the universe. They are not faded objects, but instead may be going through one of their first periods of weak star formation.
△ Less
Submitted 18 December, 1996;
originally announced December 1996.
-
Gas Rich Dwarfs from the PSS-II I. Catalog and Characteristics
Authors:
James Schombert,
Rachel Pildis,
Jo Ann Eder
Abstract:
This project is a visual search for field dwarf galaxies using Second Palomar Sky Survey photographic plates. A morphologically selected sample of 310 objects yielded 145 detections of true dwarfs within a redshift search window of 0 to 10,000 km sec^-1. We confirm the low mass, dwarf nature of the same by comparison of luminosity, isophotal size, HI mass and HI profile width distribution of oth…
▽ More
This project is a visual search for field dwarf galaxies using Second Palomar Sky Survey photographic plates. A morphologically selected sample of 310 objects yielded 145 detections of true dwarfs within a redshift search window of 0 to 10,000 km sec^-1. We confirm the low mass, dwarf nature of the same by comparison of luminosity, isophotal size, HI mass and HI profile width distribution of other dwarf samples. The goal of this project is to use these newly discovered dwarf galaxies to map large scale structure as a test of biased galaxy formation. Initial indicators are that the large scale distribution of dwarf galaxies is identical to bright, high mass galaxies, in contradiction to theory using biasing. The full analysis of the sample will be reported in the final paper of our series.
△ Less
Submitted 12 December, 1996;
originally announced December 1996.
