Showing 1–32 of 32 results for author: Eckert, S

Helicity oscillations in Rayleigh-Bénard convection of liquid metal in a cell with aspect ratio 0.5

Authors: R. Mitra, F. Stefani, V. Galindo, S. Eckert, M. Sieger, T. Vogt, T. Wondrak

Abstract: In this paper, we present numerical and experimental results on helicity oscillations in a liquid-metal Rayleigh-Bénard (RB) convection cell, with an aspect ratio of 0.5. We find that helicity oscillations occur during transitions of flow states that are characterised by significant changes in the Reynolds number. Moreover, we also observe helicity oscillations at flow conditions where the tempora… ▽ More In this paper, we present numerical and experimental results on helicity oscillations in a liquid-metal Rayleigh-Bénard (RB) convection cell, with an aspect ratio of 0.5. We find that helicity oscillations occur during transitions of flow states that are characterised by significant changes in the Reynolds number. Moreover, we also observe helicity oscillations at flow conditions where the temporal gradient of the change in the Reynolds number is significantly smaller than that of the helicity. Notably, the helicity oscillations observed during the transient double-roll state exhibit characteristics remarkably similar to those associated with the Tayler Instability. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Comments: 10 pages, 16 figures

Uncertainty Quantification of Super-Resolution Flow Map** in Liquid Metals using Ultrasound Localization Microscopy

Authors: David Weik, Zehua Dou, Dirk Räbiger, Tobias Vogt, Sven Eckert, Jürgen Czarske, Lars Büttner

Abstract: Convection of liquid metals drives large natural processes and is important in technical processes. Model experiments are conducted for research purposes where simulations are expensive and the clarification of open questions requires novel flow map** methods with an increased spatial resolution. In this work, the method of Ultrasound Localization Microscopy (ULM) is investigated for this purpos… ▽ More Convection of liquid metals drives large natural processes and is important in technical processes. Model experiments are conducted for research purposes where simulations are expensive and the clarification of open questions requires novel flow map** methods with an increased spatial resolution. In this work, the method of Ultrasound Localization Microscopy (ULM) is investigated for this purpose. Known from microvasculature imaging, this method provides an increased spatial resolution beyond the diffraction limit. Its applicability in liquid metal flows is promising, however the realization and reliability is challenging, as artificial scattering particles or microbubbles cannot be utilized. To solve this issue an approach using nonlinear adaptive beamforming is proposed. This allowed the reliable tracking of particles of which super-resolved flow maps can be deduced. Furthermore, the application in fluid physics requires quantified results. Therefore, an uncertainty quantification model based on the spatial resolution, velocity gradient and measurement parameters is proposed, which allows to estimate the flow maps validity under experimental conditions. The proposed method is demonstrated in magnetohydrodynamic convection experiments. In some occasions, ULM was able to measure velocity vectors within the boundary layer of the flow, which will help for future in-depth flow studies. Furthermore, the proposed uncertainty model of ULM is of generic use in other applications. △ Less

Submitted 16 April, 2024; originally announced April 2024.

The Heisenberg-RIXS instrument at the European XFEL

Authors: Justine Schlappa, Giacomo Ghiringhelli, Benjamin E. Van Kuiken, Martin Teichmann, Piter S. Miedema, Jan Torben Delitz, Natalia Gerasimova, Serguei Molodtsov, Luigi Adriano, Bernard Baranasic, Carsten Broers, Robert Carley, Patrick Gessler, Nahid Ghodrati, David Hickin, Le Phuong Hoang, Manuel Izquierdo, Laurent Mercadier, Giuseppe Mercurio, Sergii Parchenko, Marijan Stupar, Zhong Yin, Leonardo Martinelli, Giacomo Merzoni, Ying Ying Peng , et al. (22 additional authors not shown)

Abstract: Resonant Inelastic X-ray Scattering (RIXS) is an ideal X-ray spectroscopy method to push the combination of energy and time resolutions to the Fourier transform ultimate limit, because it is unaffected by the core-hole lifetime energy broadening. And in pump-probe experiments the interaction time is made very short by the same core-hole lifetime. RIXS is very photon hungry so it takes great advant… ▽ More Resonant Inelastic X-ray Scattering (RIXS) is an ideal X-ray spectroscopy method to push the combination of energy and time resolutions to the Fourier transform ultimate limit, because it is unaffected by the core-hole lifetime energy broadening. And in pump-probe experiments the interaction time is made very short by the same core-hole lifetime. RIXS is very photon hungry so it takes great advantage from high repetition rate pulsed X-ray sources like the European XFEL. The hRIXS instrument is designed for RIXS experiments in the soft X-ray range with energy resolution approaching the Fourier and the Heisenberg limits. It is based on a spherical grating with variable line spacing (VLS) and a position-sensitive 2D detector. Initially, two gratings are installed to adequately cover the whole photon energy range. With optimized spot size on the sample and small pixel detector the energy resolution can be better than 40 meV at any photon energy below 1000 eV. At the SCS instrument of the European XFEL the spectrometer can be easily positioned thanks to air-pads on a high-quality floor, allowing the scattering angle to be continuously adjusted over the 65-145 deg range. It can be coupled to two different sample interaction chamber, one for liquid jets and one for solids, each equipped at the state-of-the-art and compatible for optical laser pum** in collinear geometry. The measured performances, in terms of energy resolution and count rate on the detector, closely match design expectations. hRIXS is open to public users since the summer of 2022. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 43 pages, 12 figures, Supplemental Material

Current Tomography -- Localization of void fractions in conducting liquids by measuring the induced magnetic flux density

Authors: L. Krause, N. Kumar, T. Wondrak, S. Gumhold, S. Eckert, K. Eckert

Abstract: A novel concept of a measurement technology for the localization and determination of the size of gas bubbles is presented, which is intended to contribute to a further understanding of the dynamics of efficiency-reducing gas bubbles in electrolyzers. A simplified proof-of-concept (POC) model is used to numerically simulate the electric current flow through materials with significant differences i… ▽ More A novel concept of a measurement technology for the localization and determination of the size of gas bubbles is presented, which is intended to contribute to a further understanding of the dynamics of efficiency-reducing gas bubbles in electrolyzers. A simplified proof-of-concept (POC) model is used to numerically simulate the electric current flow through materials with significant differences in electrical conductivity. Through an automated approach, an extensive data set of electric current density and conductivity distributions is generated, complemented with determined magnetic flux densities in the surroundings of the POC cell at virtual sensor positions. The generated data set serves as testing data for various reconstruction approaches. Based on the measurable magnetic flux density, solving Biot-Savarts law inversely is demonstrated and discussed with a model-based solution of an optimization problem, of which the gas bubble locations are derived. △ Less

Submitted 21 July, 2023; originally announced July 2023.

Learning to reconstruct the bubble distribution with conductivity maps using Invertible Neural Networks and Error Diffusion

Authors: Nishant Kumar, Lukas Krause, Thomas Wondrak, Sven Eckert, Kerstin Eckert, Stefan Gumhold

Abstract: Electrolysis is crucial for eco-friendly hydrogen production, but gas bubbles generated during the process hinder reactions, reduce cell efficiency, and increase energy consumption. Additionally, these gas bubbles cause changes in the conductivity inside the cell, resulting in corresponding variations in the induced magnetic field around the cell. Therefore, measuring these gas bubble-induced magn… ▽ More Electrolysis is crucial for eco-friendly hydrogen production, but gas bubbles generated during the process hinder reactions, reduce cell efficiency, and increase energy consumption. Additionally, these gas bubbles cause changes in the conductivity inside the cell, resulting in corresponding variations in the induced magnetic field around the cell. Therefore, measuring these gas bubble-induced magnetic field fluctuations using external magnetic sensors and solving the inverse problem of Biot-Savart Law allows for estimating the conductivity in the cell and, thus, bubble size and location. However, determining high-resolution conductivity maps from only a few induced magnetic field measurements is an ill-posed inverse problem. To overcome this, we exploit Invertible Neural Networks (INNs) to reconstruct the conductivity field. Our qualitative results and quantitative evaluation using random error diffusion show that INN achieves far superior performance compared to Tikhonov regularization. △ Less

Submitted 28 March, 2024; v1 submitted 4 July, 2023; originally announced July 2023.

Comments: Accepted for Oral presentation at WCIPT11 (11th World Congress on Industrial Process Tomography)

Oscillatory large-scale circulation in liquid-metal thermal convection and its structural unit

Authors: Andrei Teimurazov, Sanjay Singh, Sylvie Su, Sven Eckert, Olga Shishkina, Tobias Vogt

Abstract: In Rayleigh-Bénard convection (RBC), the size of a flow domain and its aspect ratio $\varGamma$ (a ratio between the spatial length and height of the domain) affect the shape of the large-scale circulation (LSC). For some aspect ratios, the flow dynamics include a three-dimensional oscillatory mode known as a jump-rope vortex (JRV), however, the effects of varying aspect ratios on this mode are no… ▽ More In Rayleigh-Bénard convection (RBC), the size of a flow domain and its aspect ratio $\varGamma$ (a ratio between the spatial length and height of the domain) affect the shape of the large-scale circulation (LSC). For some aspect ratios, the flow dynamics include a three-dimensional oscillatory mode known as a jump-rope vortex (JRV), however, the effects of varying aspect ratios on this mode are not well investigated. In this paper, we study these aspect-ratio effects in liquid metals, for a low Prandtl number $Pr=0.03$. Direct numerical simulations and experiments are carried out for a Rayleigh number range $2.9 \times 10^4 \leq Ra \leq 1.6 \times 10^6$ and square cuboid domains with $\varGamma=2$, $2.5$, $3$ and $5$. Our study demonstrates that a repeating pattern of a JRV encountered at an aspect ratio $\varGamma \approx 2.5$ is the basic structural unit that builds up to a lattice of interlaced JRVs at the largest aspect ratio. The size of the domain determines how many structural units are self-organized within the domain; the number of the realized units is expected to scale as $\varGamma^2$ with sufficiently large and growing $\varGamma$. We find the oscillatory modes for all investigated $\varGamma$, however, they are more pronounced for $\varGamma=2.5$ and $\varGamma=5$. Future studies for large-aspect ratio domains of different shapes would enhance our understanding of how the JRVs adjust and reorganize at such scaled-up geometries, and answer the question of whether they are indeed the smallest superstructure units. △ Less

Submitted 22 April, 2023; originally announced April 2023.

Comments: 26 pages, 16 figures

Journal ref: Journal of Fluid Mechanics, 977 (2023), A16

An image processing pipeline for in-situ dynamic X-ray imaging of directional solidification of metal alloys in thin cells

Authors: Mihails Birjukovs, Natalia Shevchenko, Sven Eckert

Abstract: We present an image processing algorithm developed for quantitative analysis of directional solidification of metal alloys in thin cells using X-ray imaging. Our methodology allows to identify the fluid volume, fluid channels and cavities, and to separate them from the solidified structures. It also allows morphological analysis within the solid fraction, including automatic decomposition into dom… ▽ More We present an image processing algorithm developed for quantitative analysis of directional solidification of metal alloys in thin cells using X-ray imaging. Our methodology allows to identify the fluid volume, fluid channels and cavities, and to separate them from the solidified structures. It also allows morphological analysis within the solid fraction, including automatic decomposition into dominant grains by orientation and connectivity. In addition, the interplay between solidification and convection can be studied by characterizing convection plumes in the fluid, and solute concentrations above the develo** solidification front. The image filters used enable the developed code (open-source) to work reliably even for single images with low signal-to-noise ratio, low contrast-to-noise ratio, and low image resolution. This is demonstrated by applying the code to several dynamic in situ X-ray imaging experiments with a solidifying gallium-indium alloy in a thin cell. Grain (and global) dendrite orientation statistics, convective plume parameterization, etc. can be obtained from the code output. The limitations of the presented approach are also explained. △ Less

Submitted 9 September, 2022; originally announced October 2022.

Clannish algebras are of amenable representation type

Authors: Sebastian Eckert

Abstract: We revisit G. Elek's notion of amenable representation type, where algebras are characterised by every indecomposable module being "almost" the direct sum of modules of bounded dimension. We give a new proof of his result that string algebras are amenable that relies on the planarity of the coefficient quivers of indecomposable string and band modules. Using this connection to graph theory, we the… ▽ More We revisit G. Elek's notion of amenable representation type, where algebras are characterised by every indecomposable module being "almost" the direct sum of modules of bounded dimension. We give a new proof of his result that string algebras are amenable that relies on the planarity of the coefficient quivers of indecomposable string and band modules. Using this connection to graph theory, we then show that clannish algebras are also of amenable type. △ Less

Submitted 18 August, 2022; originally announced August 2022.

Comments: 12 pages, 2 figures

Report number: MPIM-Bonn-2022 MSC Class: 16G20 (Primary) 16G60; 05C10 (Secondary)

Synchronizing the helicity of Rayleigh-Bénard convection by a tide-like electromagnetic forcing

Authors: Peter Jüstel, Sebastian Röhrborn, Sven Eckert, Vladimir Galindo, Thomas Gundrum, Rodion Stepanov, Frank Stefani

Abstract: We present results on the synchronization of the helicity in a liquid-metal Rayleigh-Bénard (RB) experiment under the influence of a tide-like electromagnetic forcing with azimuthal wavenumber m=2. We show that for a critical forcing strength the typical Large Scale Circulation (LSC) in the cylindrical vessel of aspect ratio unity is entrained by the period of the tide-like forcing, leading to syn… ▽ More We present results on the synchronization of the helicity in a liquid-metal Rayleigh-Bénard (RB) experiment under the influence of a tide-like electromagnetic forcing with azimuthal wavenumber m=2. We show that for a critical forcing strength the typical Large Scale Circulation (LSC) in the cylindrical vessel of aspect ratio unity is entrained by the period of the tide-like forcing, leading to synchronized helicity oscillations with opposite signs in two half-spaces. The obtained experimental results are consistent with and supported by numerical simulations. A similar entrainment mechanism for the helicity in the solar tachocline may be responsible for the astonishing synchronization of the solar dynamo by the 11.07-year triple synodic alignment cycle of the tidally dominant planets Venus, Earth and Jupiter. △ Less

Submitted 25 July, 2022; v1 submitted 20 July, 2022; originally announced July 2022.

Particle tracking velocimetry and trajectory curvature statistics for particle-laden liquid metal flow in the wake of a cylindrical obstacle

Authors: Mihails Birjukovs, Peteris Zvejnieks, Tobias Lappan, Martins Klevs, Sascha Heitkam, Pavel Trtik, David Mannes, Sven Eckert, Andris Jakovics

Abstract: This paper presents the analysis of the particle-laden liquid metal wake flow around a cylindrical obstacle at different obstacle Reynolds numbers. Particles in liquid metal are visualized using dynamic neutron radiography. We present the results of particle tracking velocimetry of the obstacle wake flow using an improved version of our image processing and particle tracking code MHT-X. The latter… ▽ More This paper presents the analysis of the particle-laden liquid metal wake flow around a cylindrical obstacle at different obstacle Reynolds numbers. Particles in liquid metal are visualized using dynamic neutron radiography. We present the results of particle tracking velocimetry of the obstacle wake flow using an improved version of our image processing and particle tracking code MHT-X. The latter now utilizes divergence-free interpolation of the particle image velocimetry field used for motion prediction and particle trajectory reconstruction. We demonstrate significant improvement over the previously obtained results by showing the capabilities to assess both temporal and spatial characteristics of turbulent liquid metal flow, and validating the precision and accuracy of our methods against theoretical expectations, numerical simulations and experiments reported in literature. We obtain the expected vortex shedding frequency scaling with the obstacle Reynolds number and correctly identify the universal algebraic growth laws predicted and observed for trajectory curvature in isotropic homogeneous two-dimensional turbulence. Particle residence times within the obstacle wake and velocity statistics are also derived and found to be physically sound. Finally, we outline potential improvements to our methodology and plans for further research using neutron imaging of particle-laden flow. △ Less

Submitted 21 June, 2022; originally announced June 2022.

In-situ measurements of dendrite tip shape selection in a metallic alloy

Authors: H. Neumann-Heyme, N. Shevchenko, J. Grenzer, K. Eckert, C. Beckermann, S. Eckert

Abstract: The size and shape of the primary dendrite tips determine the principal length scale of the microstructure evolving during solidification of alloys. In-situ X-ray measurements of the tip shape in metals have been unsuccessful so far due to insufficient spatial resolution or high image noise. To overcome these limitations, high-resolution synchrotron radiography and advanced image processing techni… ▽ More The size and shape of the primary dendrite tips determine the principal length scale of the microstructure evolving during solidification of alloys. In-situ X-ray measurements of the tip shape in metals have been unsuccessful so far due to insufficient spatial resolution or high image noise. To overcome these limitations, high-resolution synchrotron radiography and advanced image processing techniques are applied to a thin sample of a solidifying Ga-35wt.%In alloy. Quantitative in-situ measurements are performed of the growth of dendrite tips during the fast initial transient and the subsequent steady growth period, with tip velocities ranging over almost two orders of magnitude. The value of the dendrite tip shape selection parameter is found to be $σ^* = 0.0768$, which suggests an interface energy anisotropy of $\varepsilon_4 = 0.015$ for the present Ga-In alloy. The non-axisymmetric dendrite tip shape amplitude coefficient is measured to be $A_4 \approx 0.004$, which is in excellent agreement with the universal value previously established for dendrites. △ Less

Submitted 8 June, 2022; v1 submitted 10 November, 2021; originally announced November 2021.

Comments: 9 pages, 6 figures, submitted to "Physical Reviews Materials"

Journal ref: Phys. Rev. Materials 6 (2022) 063401

Collapse of Coherent Large Scale Flow in Strongly Turbulent Liquid Metal Convection

Authors: Felix Schindler, Sven Eckert, Till Zürner, Jörg Schumacher, Tobias Vogt

Abstract: The large-scale flow structure and the turbulent transfer of heat and momentum are directly measured in highly turbulent liquid metal convection experiments for Rayleigh numbers varied between $4 \times 10^5$ and $\leq 5 \times 10^9$ and Prandtl numbers of $0.025~\leq~Pr~\leq ~0.033$. Our measurements are performed in two cylindrical samples of aspect ratios $Γ=$ diameter/height $= 0.5$ and 1 fill… ▽ More The large-scale flow structure and the turbulent transfer of heat and momentum are directly measured in highly turbulent liquid metal convection experiments for Rayleigh numbers varied between $4 \times 10^5$ and $\leq 5 \times 10^9$ and Prandtl numbers of $0.025~\leq~Pr~\leq ~0.033$. Our measurements are performed in two cylindrical samples of aspect ratios $Γ=$ diameter/height $= 0.5$ and 1 filled with the eutectic alloy GaInSn. The reconstruction of the three-dimensional flow pattern by 17 ultrasound Doppler velocimetry sensors detecting the velocity profiles along their beamlines in different planes reveals a clear breakdown of coherence of the large-scale circulation for $Γ= 0.5$. As a consequence, the scaling laws for heat and momentum transfer inherit a dependence on the aspect ratio. We show that this breakdown of coherence is accompanied with a reduction of the Reynolds number $Re$. The scaling exponent $β$ of the power law $Nu\propto Ra^β$ crosses \FIN{eventually} over from $β=0.221$ to 0.124 when the liquid metal flow at $Γ=0.5$ reaches $Ra\gtrsim 2\times 10^8$ and the coherent large-scale flow is completely collapsed. △ Less

Submitted 21 January, 2022; v1 submitted 29 October, 2021; originally announced October 2021.

Comments: 4 pages, 5 figures, 1 supplementary with 1 figure and 4 tables, 1 movie

Jump rope vortex flow in liquid metal Rayleigh-Bénard convection in a cuboid container of aspect ratio five

Authors: Megumi Akashi, Takatoshi Yanagisawa, Ataru Sakuraba, Felix Schindler, Susanne Horn, Tobias Vogt, Sven Eckert

Abstract: We study the topology and the temporal dynamics of turbulent Rayleigh-Benard convection in a liquid metal with a Prandtl number of 0.03 located inside a box with a square base area and an aspect ratio of five. Experiments and numerical simulations are focused on the moderate Rayleigh number range, where a new cellular flow regime has been reported by a previous study (Akashi et al., Phys. Rev. Flu… ▽ More We study the topology and the temporal dynamics of turbulent Rayleigh-Benard convection in a liquid metal with a Prandtl number of 0.03 located inside a box with a square base area and an aspect ratio of five. Experiments and numerical simulations are focused on the moderate Rayleigh number range, where a new cellular flow regime has been reported by a previous study (Akashi et al., Phys. Rev. Fluids, vol.4, 2019, 033501). This flow structure shows symmetries with respect to the vertical planes crossing at the center of the container. The dynamic behaviour is dominated by strong three-dimensional oscillations with a period length that corresponds to the turnover time. Our analysis reveals that the flow structure in the aspect ratio five box corresponds in key features to the jump rope vortex structure, which has recently been discovered in an aspect ratio two cylinder (Vogt et al., Proc. Natl Acad. Sci. USA, vol.115, 2018, 12674-12679). While in the cylinder a single jump rope vortex occurs, the coexistence of four recirculating swirls is detected in this study. %Their cycling movement is restrained by the limited height of the fluid layer in the aspect ratio five box. Their approach to the lid or the bottom of the convection box causes a temporal deceleration of both the horizontal velocity at the respective boundary and the vertical velocity in the bulk, which in turn is reflected in Nusselt number oscillations. The cellular flow regime shows remarkable similarities to properties commonly attributed to turbulent superstructures △ Less

Submitted 28 September, 2021; originally announced September 2021.

Particle tracking velocimetry in liquid gallium flow about a cylindrical obstacle

Authors: Mihails Birjukovs, Peteris Zvejnieks, Tobias Lappan, Martins Sarma, Sascha Heitkam, Pavel Trtik, David Mannes, Sven Eckert, Andris Jakovics

Abstract: This paper demonstrates particle tracking velocimetry performed for a model system wherein particle-laden liquid metal flow about a cylindrical obstacle was studied. We present the image processing methodology developed for particle detection in images with disparate and often low signal- and contrast-to-noise ratios, and the application of our MHT-X tracing algorithm for particle trajectory recon… ▽ More This paper demonstrates particle tracking velocimetry performed for a model system wherein particle-laden liquid metal flow about a cylindrical obstacle was studied. We present the image processing methodology developed for particle detection in images with disparate and often low signal- and contrast-to-noise ratios, and the application of our MHT-X tracing algorithm for particle trajectory reconstruction within and about the wake flow of the obstacle. Preliminary results indicate that the utilized methods enable consistent particle detection and recovery of long, representative particle trajectories with high confidence. However, we also underline the necessity of implementing a more advanced particle position extrapolation approach for increased tracking accuracy. We also show that the utilized particles exhibit the Stokes number range that suggests good flow tracking accuracy, and that the particle time scales extracted from reconstructed trajectories are consistent with expectations based a priori estimates. △ Less

Submitted 17 September, 2021; originally announced September 2021.

MHT-X: Offline Multiple Hypothesis Tracking with Algorithm X

Authors: Peteris Zvejnieks, Mihails Birjukovs, Martins Klevs, Megumi Akashi, Sven Eckert, Andris Jakovics

Abstract: An efficient and versatile implementation of offline multiple hypothesis tracking with Algorithm X for optimal association search was developed using Python. The code is intended for scientific applications that do not require online processing. Directed graph framework is used and multiple scans with progressively increasing time window width are used for edge construction for maximum likelihood… ▽ More An efficient and versatile implementation of offline multiple hypothesis tracking with Algorithm X for optimal association search was developed using Python. The code is intended for scientific applications that do not require online processing. Directed graph framework is used and multiple scans with progressively increasing time window width are used for edge construction for maximum likelihood trajectories. The current version of the code was developed for applications in multiphase hydrodynamics, e.g. bubble and particle tracking, and is capable of resolving object motion, merges and splits. Feasible object associations and trajectory graph edge likelihoods are determined using weak mass and momentum conservation laws translated to statistical functions for object properties. The code is compatible with n-dimensional motion with arbitrarily many tracked object properties. This framework is easily extendable beyond the present application by replacing the currently used heuristics with ones more appropriate for the problem at hand. The code is open-source and will be continuously developed further. △ Less

Submitted 1 February, 2021; v1 submitted 16 December, 2020; originally announced January 2021.

Comments: 18 pages, 15 figures

Tame (hereditary) algebras of amenable representation type

Authors: Sebastian Eckert

Abstract: We show that all finite dimensional, tame hereditary $k$-algebras are of amenable representation type (in the sense of G. Elek) for all fields $k$. The proof is adapted from our previous result for tame path algebras. Further, it is proven that this results extends to some tilted algebras, in particular tame concealed algebras are amenable. We show that all finite dimensional, tame hereditary $k$-algebras are of amenable representation type (in the sense of G. Elek) for all fields $k$. The proof is adapted from our previous result for tame path algebras. Further, it is proven that this results extends to some tilted algebras, in particular tame concealed algebras are amenable. △ Less

Submitted 15 December, 2020; originally announced December 2020.

Comments: 17 pages, 1 figure

MSC Class: 16G20; 16G60

Free-fall velocities and heat transport enhancement in liquid metal magneto-convection

Authors: Tobias Vogt, Juancheng Yang, Felix Schindler, Sven Eckert

Abstract: In geo- and astrophysics, low Prandtl number convective flows often interact with magnetic fields. Although a static magnetic field acts as a stabilizing force on such flow fields, we find that self-organized convective flow structures reach an optimal state where the heat transport significantly increases and convective velocities reach the theoretical free-fall limit, i.e. the maximum possible v… ▽ More In geo- and astrophysics, low Prandtl number convective flows often interact with magnetic fields. Although a static magnetic field acts as a stabilizing force on such flow fields, we find that self-organized convective flow structures reach an optimal state where the heat transport significantly increases and convective velocities reach the theoretical free-fall limit, i.e. the maximum possible velocity a fluid parcel can achieve when its potential buoyant energy is fully converted into kinetic energy. Our measurements show that the application of a static magnetic field leads to an anisotropic, highly ordered flow structure and a decrease of the turbulent fluctuations. When the magnetic field strength is increased beyond the optimum, Hartmann braking becomes dominant and leads to a reduction of the heat and momentum transport. The results are relevant for the understanding of magneto-hydrodynamic convective flows in planetary cores and stellar interiors in regions with strong toroidal magnetic fields oriented perpendicular to temperature gradients. △ Less

Submitted 10 December, 2020; v1 submitted 7 December, 2020; originally announced December 2020.

Transition from steady to oscillating convection rolls in Rayleigh-Bénard convection under the influence of a horizontal magnetic field

Authors: J. C. Yang, T. Vogt, S. Eckert

Abstract: In this study we consider the effect of a horizontal magnetic field on the Rayleigh-Bénard convection in a finite liquid metal layer contained in a cuboid vessel (200 \times 200 \times 40 mm^3). Laboratory experiments are performed for measuring temperature and flow field in the alloy GaInSn at Prandtl number Pr = 0.03 and in a Rayleigh number range 2.3 \times 10^4 < Ra < 2.6 \times 10^5. The fiel… ▽ More In this study we consider the effect of a horizontal magnetic field on the Rayleigh-Bénard convection in a finite liquid metal layer contained in a cuboid vessel (200 \times 200 \times 40 mm^3). Laboratory experiments are performed for measuring temperature and flow field in the alloy GaInSn at Prandtl number Pr = 0.03 and in a Rayleigh number range 2.3 \times 10^4 < Ra < 2.6 \times 10^5. The field strength is varied up to a maximum value of 320 mT (Ha = 2470, Q = 6.11 \times 10^6). The magnetic field forces the flow to form two-dimensional rolls parallel to the direction of the field lines. The experiments confirm the predictions made by Busse and Clever (J. Mécanique Théorique et Appliquée, 1983) who showed that the application of the horizontal magnetic field extends the range in which steady two-dimensional roll structures exist (Busse balloon) towards higher Ra numbers. A transition from the steady to a time-dependent oscillatory flow occurs when Ra exceeds a critical value for a given Chandrasekhar number Q, which is also equivalent to a reduction of the ratio Q/Ra. Our measurements reveal that the first develo** oscillations are clearly of two-dimensional nature, in particular a mutual increase and decrease in the size of adjacent convection rolls is observed without the formation of any detectable gradients in the velocity field along the magnetic field direction. At a ratio of Q/Ra = 1, the first 3D structures appear, which initially manifest themselves in a slight inclination of the rolls with respect to the magnetic field direction. Immediately in the course of this, there arise also disturbances in the spaces between adjacent convection rolls, which are advected along the rolls due to the secondary flow driven by Ekman pum**. The transition to fully-developed three-dimensional structures and then to a turbulent regime takes place with further lowering Q/Ra. △ Less

Submitted 4 December, 2020; originally announced December 2020.

Wild Kronecker quivers and amenability

Authors: Sebastian Eckert

Abstract: We apply the notion of hyperfinite families of modules to the wild path algebras of generalised Kronecker quivers $kΘ(d)$. While the preprojective and postinjective component are hyperfinite, we show the existence of a family of non-hyperfinite modules in the regular component for some $d$. Making use of dimension expanders to achieve this, our construction is more explicit than previous results.… ▽ More We apply the notion of hyperfinite families of modules to the wild path algebras of generalised Kronecker quivers $kΘ(d)$. While the preprojective and postinjective component are hyperfinite, we show the existence of a family of non-hyperfinite modules in the regular component for some $d$. Making use of dimension expanders to achieve this, our construction is more explicit than previous results. From this it follows that no finitely controlled wild algebra is of amenable representation type. △ Less

Submitted 7 June, 2022; v1 submitted 3 November, 2020; originally announced November 2020.

Comments: 18 pages, 2 figures. Updated version fixes some typos, improves some proofs and adds a new section dealing with the non-amenability of controlled wild algebras

Report number: MPIM-Bonn-2022 MSC Class: 16G20; 16G60

Frontiers in Planetary Rings Science

Authors: Shawn M. Brooks, Tracy M. Becker, K. Baillié, H. N. Becker, E. T. Bradley, J. E. Colwell, J. N. Cuzzi, I. de Pater, S. Eckert, M. El Moutamid, S. G. Edgington, P. R. Estrada, M. W. Evans, A. Flandes, R. G. French, Á. García, M. K. Gordon, M. M. Hedman, H. -W. Hsu, R. G. Jerousek, E. A. Marouf, B. K. Meinke, P. D. Nicholson, S. H. Pilorz, M. R. Showalter , et al. (3 additional authors not shown)

Abstract: We now know that the outer solar system is host to at least six diverse planetary ring systems, each of which is a scientifically compelling target with the potential to inform us about the evolution, history and even the internal structure of the body it adorns. These diverse ring systems represent a set of distinct local laboratories for understanding the physics and dynamics of planetary disks,… ▽ More We now know that the outer solar system is host to at least six diverse planetary ring systems, each of which is a scientifically compelling target with the potential to inform us about the evolution, history and even the internal structure of the body it adorns. These diverse ring systems represent a set of distinct local laboratories for understanding the physics and dynamics of planetary disks, with applications reaching beyond our Solar System. We highlight the current status of planetary rings science and the open questions before the community to promote continued Earth-based and spacecraft-based investigations into planetary rings. As future spacecraft missions are launched and more powerful telescopes come online in the decades to come, we urge NASA for continued support of investigations that advance our understanding of planetary rings, through research and analysis of data from existing facilities, more laboratory work and specific attention to strong rings science goals during future mission selections. △ Less

Submitted 27 August, 2020; originally announced August 2020.

Rolling Polygons with Granular Material down an Incline

Authors: Sidney Eckert, Phillip Ingalls, J. West

Abstract: The present paper reports a novel behavior involving regular polygons with n sides and filled to varying degrees with granular materials. These are comprised of a set of hollow polygons produced on a 3D printer, and a single larger hollow hexagon fabricated with wooden sides and clear Plexiglas faces. Empty or full polygons stop immediately at shallow ramp angles, and roll the full length of the r… ▽ More The present paper reports a novel behavior involving regular polygons with n sides and filled to varying degrees with granular materials. These are comprised of a set of hollow polygons produced on a 3D printer, and a single larger hollow hexagon fabricated with wooden sides and clear Plexiglas faces. Empty or full polygons stop immediately at shallow ramp angles, and roll the full length of the ramp for steep ramp angles, approaching a terminal velocity. This is consistent with results previously reported by other investigators of rolling solid polygons and partially filled cylinders. In contrast, partially filled polygons released at shallow ramp angles accelerate to a "terminal velocity," but then come to an abrupt stop. The distance traveled is reproducible and dependent on the ramp angle, number of sides and the volume fill ratio and is minimized when filled to 0.4 of its total internal volume. For larger ramp angles, the partially filled polygons again approach a "terminal velocity," but the terminal velocity is minimized, again near the fill ratio of 0.4. a simple model is introduced, but it is successful only in replicating the overall trend in velocity as a function of time for the large angle cases. △ Less

Submitted 4 May, 2020; originally announced May 2020.

Comments: 28 pages, 12 Figures

Flow regimes of Rayleigh-Bénard convection in a vertical magnetic field

Authors: Till Zürner, Felix Schindler, Tobias Vogt, Sven Eckert, Jörg Schumacher

Abstract: The effects of a vertical static magnetic field on the flow structure and global transport properties of momentum and heat in liquid metal Rayleigh-Bénard convection are investigated. Experiments are conducted in a cylindrical convection cell of unity aspect ratio, filled with the alloy GaInSn at a low Prandtl number of $\mathit{Pr}=0.029$. Changes of the large-scale velocity structure with increa… ▽ More The effects of a vertical static magnetic field on the flow structure and global transport properties of momentum and heat in liquid metal Rayleigh-Bénard convection are investigated. Experiments are conducted in a cylindrical convection cell of unity aspect ratio, filled with the alloy GaInSn at a low Prandtl number of $\mathit{Pr}=0.029$. Changes of the large-scale velocity structure with increasing magnetic field strength are probed systematically using multiple ultrasound Doppler velocimetry sensors and thermocouples for a parameter range that is spanned by Rayleigh numbers of $10^6 \le \mathit{Ra} \le 6\times 10^7$ and Hartmann numbers of $\mathit{Ha} \le 1000$. Our simultaneous multi-probe temperature and velocity measurements demonstrate how the large-scale circulation is affected by an increasing magnetic field strength (or Hartmann number). Lorentz forces induced in the liquid metal first suppress the oscillations of the large-scale circulation at low $\mathit{Ha}$, then transform the one-roll structure into a cellular large-scale pattern consisting of multiple up- and downwellings for intermediate $\mathit{Ha}$, before finally expelling any fluid motion out of the bulk at the highest accessible $\mathit{Ha}$ leaving only a near-wall convective flow that persists even below Chandrasekhar's linear instability threshold. Our study thus proves experimentally the existence of wall modes in confined magnetoconvection. The magnitude of the transferred heat remains nearly unaffected by the steady decrease of the fluid momentum over a large range of Hartmann numbers. We extend the experimental global transport analysis to momentum transfer and include the dependence of the Reynolds number on the Hartmann number. △ Less

Submitted 18 February, 2020; originally announced February 2020.

Journal ref: J. Fluid Mech. 894, A21, 2020

Combined measurement of velocity and temperature in liquid metal convection

Authors: Till Zürner, Felix Schindler, Tobias Vogt, Sven Eckert, Jörg Schumacher

Abstract: Combined measurements of velocity components and temperature in a turbulent Rayleigh-Bénard convection flow at a low Prandtl number of $\mathit{Pr}= 0.029$ and Rayleigh numbers between $10^6 \le \mathit{Ra} \le 6 \times 10^7$ are conducted in a series of experiments with durations of more than a thousand free-fall time units. Multiple crossing ultrasound beam lines and an array of thermocouples at… ▽ More Combined measurements of velocity components and temperature in a turbulent Rayleigh-Bénard convection flow at a low Prandtl number of $\mathit{Pr}= 0.029$ and Rayleigh numbers between $10^6 \le \mathit{Ra} \le 6 \times 10^7$ are conducted in a series of experiments with durations of more than a thousand free-fall time units. Multiple crossing ultrasound beam lines and an array of thermocouples at mid-height allow for a detailed analysis and characterization of the complex three-dimensional dynamics of the single large-scale circulation (LSC) roll in the cylindrical convection cell of unit aspect ratio which is filled with the liquid metal alloy GaInSn. We measure the internal temporal correlations of the complex large-scale flow and distinguish between short-term oscillations associated with a sloshing motion in the mid-plane as well as varying orientation angles of the velocity close to the top/bottom plates and the slow azimuthal drift of the mean orientation of the roll as a whole that proceeds on an up to a hundred times slower time scale. The coherent LSC drives a vigorous turbulence in the whole cell that is quantified by direct Reynolds number measurements at different locations in the cell. The velocity increment statistics in the bulk of the cell displays characteristic properties of intermittent small-scale fluid turbulence. We also show that the impact of the symmetry-breaking large-scale flow persists to small-scale velocity fluctuations thus preventing the establishment of fully isotropic turbulence in the cell centre. Reynolds number amplitudes depend sensitively on beam line position in the cell such that different definitions have to be compared. The global momentum and heat transfer scalings with Rayleigh number are found to agree with those of direct numerical simulations and other laboratory experiments. △ Less

Submitted 18 February, 2020; v1 submitted 8 July, 2019; originally announced July 2019.

Journal ref: J. Fluid Mech. 876, 1108-1128, 2019

Tame hereditary path algebras and amenability

Authors: Sebastian Eckert

Abstract: In this note we are concerned with the notion of amenable representation type as defined in a recent paper by Gábor Elek. Roughly speaking, an algebra is of amenable type if for all $\varepsilon > 0$, every finite-dimensional module has a submodule which is a direct sum of modules which are small with respect to $\varepsilon$ such that the quotient is also small in that respect. We will show that… ▽ More In this note we are concerned with the notion of amenable representation type as defined in a recent paper by Gábor Elek. Roughly speaking, an algebra is of amenable type if for all $\varepsilon > 0$, every finite-dimensional module has a submodule which is a direct sum of modules which are small with respect to $\varepsilon$ such that the quotient is also small in that respect. We will show that the tame hereditary path algebras of quivers of extended Dynkin type over any field $k$ are of amenable type, thus extending a conjecture in the aforementioned paper to another class of tame algebras. In doing so, we avoid using already known results for string algebras. We also show that path algebras of wild acyclic quivers over finite fields are not amenable. △ Less

Submitted 18 June, 2019; v1 submitted 6 August, 2018; originally announced August 2018.

Comments: 16 pages; added a new section to deal with non-amenability of wild acyclic quivers, enhanced Proposition 13, fixed some typos

MSC Class: 16G20; 16G60

Local Lorentz force and ultrasound Doppler velocimetry in a vertical convection liquid metal flow

Authors: Till Zürner, Tobias Vogt, Christian Resagk, Sven Eckert, Jörg Schumacher

Abstract: We report velocity measurements in a vertical turbulent convection flow cell that is filled with the eutectic liquid metal alloy gallium-indium-tin by the use of local Lorentz force velocimetry (LLFV) and ultrasound Doppler velocimetry (UDV). We demonstrate the applicability of LLFV for a thermal convection flow and reproduce a linear dependence of the measured force in the range of micronewtons o… ▽ More We report velocity measurements in a vertical turbulent convection flow cell that is filled with the eutectic liquid metal alloy gallium-indium-tin by the use of local Lorentz force velocimetry (LLFV) and ultrasound Doppler velocimetry (UDV). We demonstrate the applicability of LLFV for a thermal convection flow and reproduce a linear dependence of the measured force in the range of micronewtons on the local flow velocity magnitude. Furthermore, the presented experiment is used to explore scaling laws of the global turbulent transport of heat and momentum in this low-Prandtl-number convection flow. Our results are found to be consistent with theoretical predictions and recent direct numerical simulations. △ Less

Submitted 6 November, 2017; originally announced November 2017.

Comments: 11 pages, 12 figures, 2 tables

Journal ref: Exp. Fluids 59, 3 (2018)

The DRESDYN project: planned experiments and present status

Authors: Frank Stefani, Sven Eckert, Gunter Gerbeth, André Giesecke, Thomas Gundrum, Dirk Raebiger, Martin Seilmayer, Tom Weier

Abstract: The Dresden sodium facility for dynamo and thermohydraulic studies (DRESDYN) is a platform for large-scale liquid sodium experiments devoted to fundamental geo- and astrophysical questions as well as to various applied problems related to the conversion and storage of energy. Its most ambitious part is a precession driven dynamo experiment comprising 8 tons of liquid sodium supposed to rotate with… ▽ More The Dresden sodium facility for dynamo and thermohydraulic studies (DRESDYN) is a platform for large-scale liquid sodium experiments devoted to fundamental geo- and astrophysical questions as well as to various applied problems related to the conversion and storage of energy. Its most ambitious part is a precession driven dynamo experiment comprising 8 tons of liquid sodium supposed to rotate with up to 10 Hz and to precess with up to 1 Hz. Another large-scale set-up is a Tayler-Couette experiment with a gap width of 0.2 m and a height of 2 m, whose inner cylinder rotates with up to 20 Hz. Equipped with a coil system for the generation of an axial field of up to 120 mT and two different axial currents through the center and the liquid sodium, this experiment aims at studying various versions of the magnetorotational instability and their combinations with the Tayler instability. We discuss the physical background of these two experiments and delineate the present status of their technical realization. Other installations, such as a sodium loop and a test stand for In-Service-Inspection experiments will also be sketched. △ Less

Submitted 11 April, 2017; originally announced April 2017.

Comments: 4 pages, 2 figures

Visualization of the global flow structure in a modified Rayleigh-Benard setup using contactless inductive flow tomography

Authors: Thomas Wondrak, Josef Pal, Frank Stefani, Vladimir Galindo, Sven Eckert

Abstract: Rayleigh-Benard convection is not only a classical problem in fluid dynamics but plays also an important role in many metallurgical and crystal growth applications. The measurement of the flow field and of the dynamics of the emerging large-scale circulation in liquid metals is a challenging task due to the opaqueness and the high temperature of the melts. Contactless inductive flow tomography is… ▽ More Rayleigh-Benard convection is not only a classical problem in fluid dynamics but plays also an important role in many metallurgical and crystal growth applications. The measurement of the flow field and of the dynamics of the emerging large-scale circulation in liquid metals is a challenging task due to the opaqueness and the high temperature of the melts. Contactless inductive flow tomography is a technique to visualize the mean three-dimensional flow structure in liquid metals by measuring the flow induced magnetic field perturbations under the influence of one or several applied magnetic fields. In this paper, we present first measurements of the flow induced magnetic field in a Rayleigh-Benard setup, which are also used to investigate the dynamics of the large-scale circulation. Additionally, we investigate numerically the quality of the reconstruction of the three-dimensional flow field for different sensor configurations. △ Less

Submitted 16 February, 2017; originally announced February 2017.

Comments: 31 pages, 20 figures

Instabilities and spin-up behaviour of a rotating magnetic field driven flow in a rectangular cavity

Authors: V. Galindo, R. Nauber, D. Räbiger, S. Franke, H. Beyer, L. Büttner, J. Czarske, S. Eckert

Abstract: This study presents numerical simulations and experiments considering the flow of an electrically conducting fluid inside a cube driven by a rotating magnetic field (RMF). The investigations are focused on the spin-up, where a liquid metal (GaInSn) is suddenly exposed to an azimuthal body force generated by the RMF, and the subsequent flow development. The numerical simulations rely on a semi-anal… ▽ More This study presents numerical simulations and experiments considering the flow of an electrically conducting fluid inside a cube driven by a rotating magnetic field (RMF). The investigations are focused on the spin-up, where a liquid metal (GaInSn) is suddenly exposed to an azimuthal body force generated by the RMF, and the subsequent flow development. The numerical simulations rely on a semi-analytical expression for the induced electromagnetic force density in an electrically conducting medium inside a cuboid container with insulating walls. Velocity distributions in two perpendicular planes are measured using a novel dual-plane, two-component ultrasound array Doppler velocimeter (UADV) with continuous data streaming, enabling long term measurements for investigating transient flows. This approach allows to identify the main emerging flow modes during the transition from a stable to unstable flow regimes with exponentially growing velocity oscillations using the Proper Orthogonal Decomposition (POD) method. Characteristic frequencies in the oscillating flow regimes are determined in the super critical range above the critical magnetic Taylor number $Ta_c \approx 1.26 \times 10^5$, where the transition from the steady double vortex structure of the secondary flow to an unstable regime with exponentially growing oscillations is detected. The mean flow structures and the temporal evolution of the flow predicted by the numerical simulations and observed in experiments are in very good agreement. △ Less

Submitted 2 November, 2017; v1 submitted 6 December, 2016; originally announced December 2016.

Comments: 34 pages, 25 figures, submitted to Physics of Fluids

DRESDYN - A new facility for MHD experiments with liquid sodium

Authors: F. Stefani, S. Eckert, G. Gerbeth, A. Giesecke, Th. Gundrum, C. Steglich, T. Weier, B. Wustmann

Abstract: The DREsden Sodium facility for DYNamo and thermohydraulic studies (DRESDYN) is intended as a platform both for large scale experiments related to geo- and astrophysics as well as for experiments related to thermohydraulic and safety aspects of liquid metal batteries and liquid metal fast reactors. The most ambitious projects in the framework of DRESDYN are a homogeneous hydromagnetic dynamo drive… ▽ More The DREsden Sodium facility for DYNamo and thermohydraulic studies (DRESDYN) is intended as a platform both for large scale experiments related to geo- and astrophysics as well as for experiments related to thermohydraulic and safety aspects of liquid metal batteries and liquid metal fast reactors. The most ambitious projects in the framework of DRESDYN are a homogeneous hydromagnetic dynamo driven solely by precession and a large Taylor-Couette type experiment for the combined investigation of the magnetorotational instability and the Tayler instability. In this paper we give a short summary about the ongoing preparations and delineate the next steps for the realization of DRESDYN. △ Less

Submitted 27 January, 2012; originally announced January 2012.

Comments: 10 pages, 6 figures, submitted to Magnetohydrodynamics

Journal ref: Magnetohydrodynamics 48 (2012), pp. 103-113

Young Exoplanet Transit Initiative (YETI)

Authors: R. Neuhäuser, R. Errmann, A. Berndt, G. Maciejewski, H. Takahashi, W. P. Chen, D. P. Dimitrov, T. Pribulla, E. H. Nikogossian, E. L. N. Jensen, L. Marschall, Z. -Y. Wu, A. Kellerer, F. M. Walter, C. Briceño, R. Chini, M. Fernandez, St. Raetz, G. Torres, D. W. Latham, S. N. Quinn, A. Niedzielski, Ł. Bukowiecki, G. Nowak, T. Tomov , et al. (58 additional authors not shown)

Abstract: We present the Young Exoplanet Transit Initiative (YETI), in which we use several 0.2 to 2.6m telescopes around the world to monitor continuously young (< 100 Myr), nearby (< 1 kpc) stellar clusters mainly to detect young transiting planets (and to study other variability phenomena on time-scales from minutes to years). The telescope network enables us to observe the targets continuously for sever… ▽ More We present the Young Exoplanet Transit Initiative (YETI), in which we use several 0.2 to 2.6m telescopes around the world to monitor continuously young (< 100 Myr), nearby (< 1 kpc) stellar clusters mainly to detect young transiting planets (and to study other variability phenomena on time-scales from minutes to years). The telescope network enables us to observe the targets continuously for several days in order not to miss any transit. The runs are typically one to two weeks long, about three runs per year per cluster in two or three subsequent years for about ten clusters. There are thousands of stars detectable in each field with several hundred known cluster members, e.g. in the first cluster observed, Tr-37, a typical cluster for the YETI survey, there are at least 469 known young stars detected in YETI data down to R=16.5 mag with sufficient precision of 50 milli-mag rms (5 mmag rms down to R=14.5 mag) to detect transits, so that we can expect at least about one young transiting object in this cluster. If we observe 10 similar clusters, we can expect to detect approximately 10 young transiting planets with radius determinations. The precision given above is for a typical telescope of the YETI network, namely the 60/90-cm Jena telescope (similar brightness limit, namely within +/-1 mag, for the others) so that planetary transits can be detected. For planets with mass and radius determinations, we can calculate the mean density and probe the internal structure. We aim to constrain planet formation models and their time-scales by discovering planets younger than 100 Myr and determining not only their orbital parameters, but also measuring their true masses and radii, which is possible so far only by the transit method. Here, we present an overview and first results. (Abstract shortened) △ Less

Submitted 21 June, 2011; originally announced June 2011.

Comments: 15 pages, 10 figures, AN accepted 2011 June 15

Electromagnetic response of a highly granular hadronic calorimeter

Authors: C. Adloff, J. Blaha, J. -J. Blaising, C. Drancourt, A. Espargilière, R. Gaglione, N. Geffroy, Y. Karyotakis, J. Prast, G. Vouters, K. Francis, J. Repond, J. Smith, L. Xia, E. Baldolemar, J. Li, S. T. Park, M. Sosebee, A. P. White, J. Yu, Y. Mikami, N. K. Watson T. Goto, G. Mavromanolakis, M. A. Thomson, D. R. Ward W. Yan , et al. (142 additional authors not shown)

Abstract: The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the hadronic calorimeter, one option is a highly granular sampling calorimeter with steel as absorber and scintillator layers as active material. High granularity is obtained by segmenting the scintillator into small tiles individuall… ▽ More The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the hadronic calorimeter, one option is a highly granular sampling calorimeter with steel as absorber and scintillator layers as active material. High granularity is obtained by segmenting the scintillator into small tiles individually read out via silicon photo-multipliers (SiPM). A prototype has been built, consisting of thirty-eight sensitive layers, segmented into about eight thousand channels. In 2007 the prototype was exposed to positrons and hadrons using the CERN SPS beam, covering a wide range of beam energies and incidence angles. The challenge of cell equalization and calibration of such a large number of channels is best validated using electromagnetic processes. The response of the prototype steel-scintillator calorimeter, including linearity and uniformity, to electrons is investigated and described. △ Less

Submitted 8 June, 2011; v1 submitted 20 December, 2010; originally announced December 2010.

Report number: DESY 10-241

Journal ref: JINST 6 (2011) P04003

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

Authors: The ATLAS Collaboration, G. Aad, E. Abat, B. Abbott, J. Abdallah, A. A. Abdelalim, A. Abdesselam, O. Abdinov, B. Abi, M. Abolins, H. Abramowicz, B. S. Acharya, D. L. Adams, T. N. Addy, C. Adorisio, P. Adragna, T. Adye, J. A. Aguilar-Saavedra, M. Aharrouche, S. P. Ahlen, F. Ahles, A. Ahmad, H. Ahmed, G. Aielli, T. Akdogan , et al. (2587 additional authors not shown)

Abstract: A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on… ▽ More A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN. △ Less

Submitted 14 August, 2009; v1 submitted 28 December, 2008; originally announced January 2009.