Showing 1–24 of 24 results for author: Eckert, J

Nano-Patterned Pt-Based Metallic Glass Electrocatalysts with In-Situ Copper Oxide Foam for Enhanced Hydrogen Evolution

Authors: Fei-Fan Cai, Baran Sarac, Adnan Akman, Juan J. Londoño, Selin Gümrükcü, Lukas Schweiger, Martin Hantusch, Jan Schroers, Andreas Blatter, Annett Gebert, Florian Spieckermann, Jürgen Eckert

Abstract: Hydrogen is a promising energy carrier for replacing fossil fuels, and hydrogen production via hydrogen evolution reaction (HER) is an environmentally friendly option if electrocatalysts with low overpotentials and long-term stability are used. In this work, the electrocatalytic performance of $\mathrm{Pt_{57.5}Cu_{14.7}Ni_{5.3}P_{22.5}}$ bulk metallic glass (BMG) with flat, micro-patterned, and n… ▽ More Hydrogen is a promising energy carrier for replacing fossil fuels, and hydrogen production via hydrogen evolution reaction (HER) is an environmentally friendly option if electrocatalysts with low overpotentials and long-term stability are used. In this work, the electrocatalytic performance of $\mathrm{Pt_{57.5}Cu_{14.7}Ni_{5.3}P_{22.5}}$ bulk metallic glass (BMG) with flat, micro-patterned, and nano-patterned surfaces for HER in 0.5 M H2SO4 is studied. The nano-patterned Pt-BMG demonstrates outstanding long-term stability and self-improving behavior with a final overpotential of 150 mV and a Tafel slope of 42 $\mathrm{mV dec^{-1}}$ after 1000 linear sweep voltammetry (LSV) cycles, which is respectively 42% and 37% lower than in the first LSV cycle. X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) indicate the formation of a layer of CuO/Cu2O foam deposited on top of the nano-patterned surface during the stability test of 1000 LSV cycles. A three-step process is proposed to explain the formation of CuxO foam via dynamic hydrogen bubble templating (DHBT) electrodeposition from Cu dissolution of the Pt-BMG without using copper salt. This work provides a method to create CuxO foams that could be used for various applications. Moreover, nano-patterned BMGs with DHBT deposition offer a feasible strategy to synthesize metal or metal-oxide foams. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 28 pages, 9 figures (including supplementary information)

Phase Retrieval in Incoherent Diffractive Imaging using higher-order photon correlation functions

Authors: M. Bojer, J. Eckert, S. Karl, S. Richter, J. von Zanthier

Abstract: To obtain spatial information about an arbitrary object in x-ray structure analysis, the standard method is to measure the intensity in the far field, i.e., the first-order photon correlation function of the coherently scattered x-ray photons (coherent diffractive imaging). Recently, it was suggested to record alternatively the incoherently scattered photons and measure the second-order photon cor… ▽ More To obtain spatial information about an arbitrary object in x-ray structure analysis, the standard method is to measure the intensity in the far field, i.e., the first-order photon correlation function of the coherently scattered x-ray photons (coherent diffractive imaging). Recently, it was suggested to record alternatively the incoherently scattered photons and measure the second-order photon correlation function to reconstruct the geometry of the unknown object (incoherent diffractive imaging). Yet, besides various advantages of the latter method, both techniques suffer from the so-called phase retrieval problem. Lately, an ab-initio phase retrieval algorithm to reconstruct the phase of the so-called structure factor of the scattering objects based on the third-order photon correlation function was reported. The algorithm makes use of the so-called closure phase, which contains important, yet incomplete phase information, well-known from triple correlations and their bispectrum in speckle masking and astronomy applications. Here, we provide a detailed analysis of the underlying scheme and quantities in the context of x-ray structure analysis. In particular, we explicitly calculate the third-order photon correlation function in a full quantum mechanical treatment and discuss the uniqueness of the closure phase equations constructed from it. In this context, we recapitulate the sign problem of the closure phase and how it can be lifted using redundant information. We further show how the algorithm can be improved using even higher-order photon correlation functions, e.g., the fourth-order correlation function, delivering new phase relations appearing in the four-point correlations. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Rejuvenation engineering in metallic glasses by complementary stress and structure modulation

Authors: D. Şopu, F. Spieckermann, X. L. Bian, S. Fellner, J. Wright, M. Cordill, C. Gammer, G. Wang, M. Stoica, J. Eckert

Abstract: Residual stress engineering is very widely used in the design of new advanced lightweight materials. For metallic glasses the attention has been on structural changes and rejuvenation processes. High energy scanning X-ray diffraction strain map** reveals large elastic fluctuations in metallic glasses after deformation under triaxial compression. Microindentation hardness map** hints to a compe… ▽ More Residual stress engineering is very widely used in the design of new advanced lightweight materials. For metallic glasses the attention has been on structural changes and rejuvenation processes. High energy scanning X-ray diffraction strain map** reveals large elastic fluctuations in metallic glasses after deformation under triaxial compression. Microindentation hardness map** hints to a competing hardening-softening mechanism after compression and further reveals the complementary effects of stress and structure modulation. Transmission electron microscopy proves that structure modulation under room temperature deformation relates to the shear band formation that closely correlates to the distribution of elastic heterogeneities. Molecular dynamics simulations provide an atomistic understanding of the complex shear band activity in notched metallic glasses and the related fluctuations in the strain/stress heterogeneity. Thus, future focus should be given to stress engineering and elastic heterogeneity that together with structure modulation may allow to design metallic glasses with enhanced ductility and strain hardening ability. △ Less

Submitted 11 October, 2022; v1 submitted 16 September, 2022; originally announced September 2022.

Magnetron Sputtered Non-Toxic and Precious Element-Free Ti-Zr-Ge Metallic Glass Nanofilms with Enhanced Biocorrosion Resistance

Authors: Baran Sarac, Matej Micusik, Barbara Putz, Stefan Wurster, Elham Sharifikolouei, Lixia Xi, Maria Omastova, Florian Spieckermann, Christian Mitterer, Jürgen Eckert

Abstract: The chemical composition and structural state of advanced alloys are the decisive factors in optimum biomedical performance. This contribution presents unique Ti-Zr-Ge metallic glass thin-film compositions fabricated by magnetron sputter deposition targeted for nanocoatings for biofouling prevention. The amorphous nanofilms with nanoscale roughness exhibit a large relaxation and supercooled liquid… ▽ More The chemical composition and structural state of advanced alloys are the decisive factors in optimum biomedical performance. This contribution presents unique Ti-Zr-Ge metallic glass thin-film compositions fabricated by magnetron sputter deposition targeted for nanocoatings for biofouling prevention. The amorphous nanofilms with nanoscale roughness exhibit a large relaxation and supercooled liquid regions as revealed by flash differential scanning calorimetry. Ti\textsubscript{68}Zr\textsubscript{8}Ge\textsubscript{24} shows the lowest corrosion (0.17 \textmu A cm\textsuperscript{\textminus2}) and passivation (1.22 \textmu A cm\textsuperscript{\textminus2}) current densities, with the lowest corrosion potential of \textminus0.648 V and long-range stability against pitting, corroborating its excellent performance in phosphate buffer solution at 37 {\textdegree}C. The oxide layer is comprised of TiO\textsubscript{2}, TiO\textsubscript{\emph{x}} and ZrO\textsubscript{\emph{x}}, as determined using X-ray photoelectron spectroscopy by short-term ion-etching of the surface layer. The two orders of magnitude increase in the oxide and interface resistance (from 14 to 1257 {\textOmega} cm\textsuperscript{2}) along with an order of magnitude decrease in the capacitance parameter of the oxide interface (from 1.402 x 10\textsuperscript{\textminus5} to 1.677 x 10\textsuperscript{\textminus6} S s\textsuperscript{n} cm\textsuperscript{\textminus2}) of the same composition is linked to the formation of carbonyl groups and reduction of the native oxide layer during linear sweep voltammetry. △ Less

Submitted 1 August, 2022; v1 submitted 14 July, 2022; originally announced July 2022.

Comments: 34 Pages, 5 Figures, 4 Tables, 13 Supplementary Figures

Epithelia are multiscale active liquid crystals

Authors: Josep-Maria Armengol-Collado, Livio Nicola Carenza, Julia Eckert, Dimitrios Krommydas, Luca Giomi

Abstract: Biological processes such as embryogenesis, wound healing and cancer progression, crucially rely on the ability of epithelial cells to coordinate their mechanical activity over length scales order of magnitudes larger than the typical cellular size. While regulated by various signalling pathways, it has recently become evident that this behavior can additionally hinge on a minimal toolkit of physi… ▽ More Biological processes such as embryogenesis, wound healing and cancer progression, crucially rely on the ability of epithelial cells to coordinate their mechanical activity over length scales order of magnitudes larger than the typical cellular size. While regulated by various signalling pathways, it has recently become evident that this behavior can additionally hinge on a minimal toolkit of physical mechanisms, of which liquid crystal order is the most prominent example. Yet, experimental and theoretical studies have given so far inconsistent results in this respect: whereas nematic order is often invoked in the interpretation of experimental data, computational models have instead suggested that hexatic order could serve as a linchpin for collective migration in confluent cell layers. In this article we resolve this dilemma. Using a combination of in vitro experiments on Madin-Darby canine kidney cells (MDCK), numerical simulations and analytical work, we demonstrate that both nematic and hexatic order are, in fact, present in epithelial layers, with the former being dominant at large length scales and the latter at small length scales. In MDCK GII cells on uncoated glass, these different types of liquid crystal order crossover at a length scale of the order of ten cell sizes. Our work sheds light on the emergent organization of living matter, provides a new framework for deciphering the structure of epithelia, and paves the way toward a comprehensive and predictive mesoscopic theory of tissues. △ Less

Submitted 6 December, 2022; v1 submitted 1 February, 2022; originally announced February 2022.

Theory of defect-mediated morphogenesis

Authors: Ludwig A. Hoffmann, Livio Nicola Carenza, Julia Eckert, Luca Giomi

Abstract: Growing experimental evidence indicates that topological defects could serve as organizing centers in the morphogenesis of tissues. Here, we provide a quantitative explanation for this phenomenon, rooted in the buckling theory of deformable active polar liquid crystals. Using a combination of linear stability analysis and computational fluid dynamics, we demonstrate that active layers, such as con… ▽ More Growing experimental evidence indicates that topological defects could serve as organizing centers in the morphogenesis of tissues. Here, we provide a quantitative explanation for this phenomenon, rooted in the buckling theory of deformable active polar liquid crystals. Using a combination of linear stability analysis and computational fluid dynamics, we demonstrate that active layers, such as confined cell monolayers, are unstable to the formation of protrusions in the presence of disclinations. The instability originates from an interplay between the focusing of the elastic forces, mediated by defects, and the renormalization of the system's surface tension by the active flow. The posttransitional regime is also characterized by several complex morphodynamical processes, such as oscillatory deformations, droplet nucleation, and active turbulence. Our findings offer an explanation of recent observations on tissue morphogenesis and shed light on the dynamics of active surfaces in general. △ Less

Submitted 22 March, 2022; v1 submitted 31 May, 2021; originally announced May 2021.

Comments: 10 pages, 3 figures. 5 pages, 2 figure Supplementary Information. Minor edits and some clarifications added

Structure-dynamics relationships in cryogenically deformed bulk metallic glass

Authors: Florian Spieckermann, Daniel Şopu, Viktor Soprunyuk, Michael B. Kerber, Jozef Bednarčík, Alexander Schökel, Amir Rezvan, Sergey Ketov, Baran Sarac, Erhard Schafler, Jürgen Eckert

Abstract: The atomistic mechanisms occurring during the processes of aging and rejuvenation in glassy materials involve very small structural rearrangements that are extremely difficult to capture experimentally. Here we use in-situ X-ray diffraction to investigate the structural rearrangements during annealing from 77 K up to the crystallization temperature in Cu44Zr44Al8Hf2Co2 bulk metallic glass rejuvena… ▽ More The atomistic mechanisms occurring during the processes of aging and rejuvenation in glassy materials involve very small structural rearrangements that are extremely difficult to capture experimentally. Here we use in-situ X-ray diffraction to investigate the structural rearrangements during annealing from 77 K up to the crystallization temperature in Cu44Zr44Al8Hf2Co2 bulk metallic glass rejuvenated by high pressure torsion performed at cryogenic temperatures and at room temperature. Using a measure of the configurational entropy calculated from the X-ray pair correlation function, the structural footprint of the deformation-induced rejuvenation in bulk metallic glass is revealed. With synchrotron radiation, temperature and time resolutions comparable to calorimetric experiments are possible. This opens hitherto unavailable experimental possibilities allowing to unambiguously correlate changes in atomic configuration and structure to calorimetrically observed signals and can attribute those to changes of the dynamic and vibrational relaxations (α-, β- and γ-transition) in glassy materials. The results suggest that the structural footprint of the β-transition is related to entropic relaxation with characteristics of a first-order transition. Dynamic mechanical analysis data shows that in the range of the β-transition, non-reversible structural rearrangements are preferentially activated. The low-temperature γ-transition is mostly triggering reversible deformations and shows a change of slope in the entropic footprint suggesting second-order characteristics. △ Less

Submitted 11 January, 2022; v1 submitted 19 April, 2021; originally announced April 2021.

Journal ref: Nat. Commun. 13, 127 (2022)

Magnetic ground-state of the one-dimensional ferromagnetic chain compounds $M$(NCS)$_2$(thiourea)$_2$; $M$ = Ni, Co

Authors: Samuel P. M. Curley, Rebecca Scatena, Robert C. Williams, Paul A. Goddard, Piero Macchi, Thomas J. Hicken, Tom Lancaster, Fan Xiao, Stephen J. Blundell, Vivien Zapf, James C. Eckert, Elizabeth H. Krenkel, Jacqueline A. Villa, Melissa L. Rhodehouse, Jamie L. Manson

Abstract: The magnetic properties of the two isostructural molecule-based magnets, Ni(NCS)$_{2}$(thiourea)$_{2}$, $S$ = 1, [thiourea = SC(NH$_2$)$_2$] and Co(NCS)$_{2}$(thiourea)$_{2}$, $S$ = 3/2, are characterised using several techniques in order to rationalise their relationship with structural parameters and ascertain magnetic changes caused by substitution of the spin. Zero-field heat capacity and muon… ▽ More The magnetic properties of the two isostructural molecule-based magnets, Ni(NCS)$_{2}$(thiourea)$_{2}$, $S$ = 1, [thiourea = SC(NH$_2$)$_2$] and Co(NCS)$_{2}$(thiourea)$_{2}$, $S$ = 3/2, are characterised using several techniques in order to rationalise their relationship with structural parameters and ascertain magnetic changes caused by substitution of the spin. Zero-field heat capacity and muon-spin relaxation measurements reveal low-temperature long-range ordering in both compounds, in addition to Ising-like ($D < 0$) single-ion anisotropy ($D_{\rm{Co}} \sim$ -100 K, $D_{\rm{Ni}} \sim$ -10 K). Crystal and electronic structure, combined with DC-field magnetometry, affirm highly quasi-one-dimensional behaviour, with ferromagnetic intrachain exchange interactions $J_{\rm{Co}}\approx+4$ K and $J_{\rm{Ni}}\sim+100$ K and weak antiferromagnetic interchain exchange, on the order of $J'$ $\sim-0.1$ K. Electron charge and spin-density map** reveals through-space exchange as a mechanism to explain the large discrepancy in $J$-values despite, from a structural perspective, the highly similar exchange pathways in both materials. Both species can be compared to the similar compounds $M$Cl$_2$(thiourea)$_4$, $M$ = Ni(II) (DTN) and Co(II) (DTC), where DTN is know to harbour two magnetic field-induced quantum critical points. Direct comparison of DTN and DTC with the compounds studied here shows that substituting the halide Cl$^-$ ion, for the NCS$^-$ ion, results in a dramatic change in both the structural and magnetic properties. △ Less

Submitted 10 March, 2021; v1 submitted 1 December, 2020; originally announced December 2020.

Comments: Main text: 13 pages - 11 figures, 2 tables. Supplemental information: 6 pages - 2 figures, 6 tables

Journal ref: Phys. Rev. Materials 5, 034401 (2021)

Deep Learning Algorithms for Coronary Artery Plaque Characterisation from CCTA Scans

Authors: Felix Denzinger, Michael Wels, Katharina Breininger, Anika Reidelshöfer, Joachim Eckert, Michael Sühling, Axel Schmermund, Andreas Maier

Abstract: Analysing coronary artery plaque segments with respect to their functional significance and therefore their influence to patient management in a non-invasive setup is an important subject of current research. In this work we compare and improve three deep learning algorithms for this task: A 3D recurrent convolutional neural network (RCNN), a 2D multi-view ensemble approach based on texture analys… ▽ More Analysing coronary artery plaque segments with respect to their functional significance and therefore their influence to patient management in a non-invasive setup is an important subject of current research. In this work we compare and improve three deep learning algorithms for this task: A 3D recurrent convolutional neural network (RCNN), a 2D multi-view ensemble approach based on texture analysis, and a newly proposed 2.5D approach. Current state of the art methods utilising fluid dynamics based fractional flow reserve (FFR) simulation reach an AUC of up to 0.93 for the task of predicting an abnormal invasive FFR value. For the comparable task of predicting revascularisation decision, we are able to improve the performance in terms of AUC of both existing approaches with the proposed modifications, specifically from 0.80 to 0.90 for the 3D-RCNN, and from 0.85 to 0.90 for the multi-view texture-based ensemble. The newly proposed 2.5D approach achieves comparable results with an AUC of 0.90. △ Less

Submitted 13 December, 2019; originally announced December 2019.

Comments: Accepted at BVM 2020

Coronary Artery Plaque Characterization from CCTA Scans using Deep Learning and Radiomics

Authors: Felix Denzinger, Michael Wels, Nishant Ravikumar, Katharina Breininger, Anika Reidelshöfer, Joachim Eckert, Michael Sühling, Axel Schmermund, Andreas Maier

Abstract: Assessing coronary artery plaque segments in coronary CT angiography scans is an important task to improve patient management and clinical outcomes, as it can help to decide whether invasive investigation and treatment are necessary. In this work, we present three machine learning approaches capable of performing this task. The first approach is based on radiomics, where a plaque segmentation is u… ▽ More Assessing coronary artery plaque segments in coronary CT angiography scans is an important task to improve patient management and clinical outcomes, as it can help to decide whether invasive investigation and treatment are necessary. In this work, we present three machine learning approaches capable of performing this task. The first approach is based on radiomics, where a plaque segmentation is used to calculate various shape-, intensity- and texture-based features under different image transformations. A second approach is based on deep learning and relies on centerline extraction as sole prerequisite. In the third approach, we fuse the deep learning approach with radiomic features. On our data the methods reached similar scores as simulated fractional flow reserve (FFR) measurements, which - in contrast to our methods - requires an exact segmentation of the whole coronary tree and often time-consuming manual interaction. In literature, the performance of simulated FFR reaches an AUC between 0.79-0.93 predicting an abnormal invasive FFR that demands revascularization. The radiomics approach achieves an AUC of 0.86, the deep learning approach 0.84 and the combined method 0.88 for predicting the revascularization decision directly. While all three proposed methods can be determined within seconds, the FFR simulation typically takes several minutes. Provided representative training data in sufficient quantities, we believe that the presented methods can be used to create systems for fully automatic non-invasive risk assessment for a variety of adverse cardiac events. △ Less

Submitted 13 December, 2019; v1 submitted 12 December, 2019; originally announced December 2019.

Comments: International Conference on Medical Image Computing and Computer-Assisted Intervention. Springer, Cham, 2019

Kondo exhaustion and conductive surface states in antiferromagnetic YbIr$_3$Si$_7$

Authors: Macy Stavinoha, C. -L. Huang, W. Adam Phelan, Alannah M. Hallas, V. Loganathan, Jeffrey W. Lynn, Qingzhen Huang, Franziska Weickert, Vivien Zapf, Katharine R. Larsen, Patricia D. Sparks, James C. Eckert, Anand B. Puthirath, C. Hooley, Andriy H. Nevidomskyy, E. Morosan

Abstract: The interplay of Kondo screening and magnetic ordering in strongly correlated materials containing local moments is a subtle problem.[1] Usually the number of conduction electrons matches or exceeds the number of moments, and a Kondo-screened heavy Fermi liquid develops at low temperatures.[2] Changing the pressure, magnetic field, or chemical do** can displace this heavy Fermi liquid in favor o… ▽ More The interplay of Kondo screening and magnetic ordering in strongly correlated materials containing local moments is a subtle problem.[1] Usually the number of conduction electrons matches or exceeds the number of moments, and a Kondo-screened heavy Fermi liquid develops at low temperatures.[2] Changing the pressure, magnetic field, or chemical do** can displace this heavy Fermi liquid in favor of a magnetically ordered state.[3,4] Here we report the discovery of a version of such a `Kondo lattice' material, YbIr$_3$Si$_7$, in which the number of free charge carriers is much less than the number of local moments. This leads to `Kondo exhaustion':[5] the electrical conductivity tends to zero at low temperatures as all the free carriers are consumed in the formation of Kondo singlets. This effect coexists with antiferromagnetic long-range order, with a Néel temperature $T\rm_N = 4.1\,{\rm K}$. Furthermore, the material shows conductive surface states with potential topological nature, and thus presents an exciting topic for future investigations. △ Less

Submitted 30 August, 2019; v1 submitted 29 August, 2019; originally announced August 2019.

A blockchain-based user-centric emission monitoring and trading system for multi-modal mobility

Authors: Johannes Eckert, David López, Carlos Lima Azevedo, Bilal Farooq

Abstract: Since the transport sector accounts for one of the highest shares of greenhouse gases (GHG) emissions, several existing proposals state the idea to control the by the transportation sector caused GHG emissions through an Emission Trading Systems (ETS). However, most existing approaches integrate GHG emissions through the fuel consumption and car registration, limiting the tracing of emissions in m… ▽ More Since the transport sector accounts for one of the highest shares of greenhouse gases (GHG) emissions, several existing proposals state the idea to control the by the transportation sector caused GHG emissions through an Emission Trading Systems (ETS). However, most existing approaches integrate GHG emissions through the fuel consumption and car registration, limiting the tracing of emissions in more complex modes e.g. shared vehicles, shared rides and even public transportation. This paper presents a new design of a user-centric ETS and its implementation as a carbon Blockchain framework for Smart Mobility Data-market (cBSMD). The cBSMD allows for the seamless transactions of token-equivalent GHG emissions when realizing a trip, or an emission trading action as well as the transaction of individual, service or system-wide emission performance data. We demonstrate an instance of the cBSMD implementation for the transactions of an ETS where all travellers receive a certain amount of emission credits in the form of tokens, linked to the GHG price and a total emission cap. Travellers use their tokens each time they emit GHG when travelling in a multi-modal network, purchase tokens for a given trip when they have an insufficient token amount or sell when having a surplus of tokens due to a lower amount of emitted GHG. This instance of cBSMD is then applied to a case-study of 24hours of mobility of 3,186 travellers from Oakville, Ontario, Canada, where we showcase different cBSMD transactions and analyze token usage and emission performance. △ Less

Submitted 27 August, 2019; v1 submitted 15 August, 2019; originally announced August 2019.

Comments: 15 pages, 5 figures

Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales

Authors: Oleksandr Glushko, Alexander Funk, Verena Maier-Kiener, Philipp Kraker, Maria Krautz, Jurgen Eckert, Anja Waske

Abstract: In this work the global and local mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy are investigated by a combination of different testing and characterization techniques in order to shed light on the partly contradictory data in recent literature. Macroscale compression tests were performed to illuminate the global fracture behavior and evaluate it statistically. LaFe1… ▽ More In this work the global and local mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy are investigated by a combination of different testing and characterization techniques in order to shed light on the partly contradictory data in recent literature. Macroscale compression tests were performed to illuminate the global fracture behavior and evaluate it statistically. LaFe11.2Si1.8 demonstrates a brittle behavior with fracture strains below 0.6 % and widely distributed fracture stresses of 180-620 MPa leading to a Weibull modulus of m = 2 to 6. The local mechanical properties, such as hardness and Youngs modulus, of the main and secondary phases are examined by nanoindentation and Vickers microhardness tests. An intrinsic strength of the main magnetocaloric phase of at least 2 GPa is estimated. The significantly lower values obtained by compression tests are attributed to the detrimental effect of pores, microcracks, and secondary phases. Microscopic examination of indentation-induced cracks reveals that ductile alpha-Fe precipitates act as crack arrestors whereas pre-existing cracks at La-rich precipitates provide numerous "weak links" for the initiation of catastrophic fracture. The presented systematic study extends the understanding of the mechanical reliability of La(Fe, Si)13 alloys by revealing the correlations between the mechanical behavior of macroscopic multi-phase samples and the local mechanical properties of the single phases. △ Less

Submitted 2 April, 2019; originally announced April 2019.

Journal ref: Acta Materialia 165 (2019) 40-50

Magnetic properties of double perovskite $Ln_2$CoIrO$_6$ ($Ln$ = Eu, Tb, Ho): hetero-tri-spin $3d$-$5d$-$4f$ systems

Authors: Xiaxin Ding, Bin Gao, Elizabeth Krenkel, Charles Dawson, James C. Eckert, Sang-Wook Cheong, Vivien Zapf

Abstract: The field of double perovskites is now advancing to three magnetic elements on the A, B and B$'$ sites. A series of iridium-based double perovskite compounds, $Ln_2$CoIrO$_6$ ($Ln$ = Eu, Tb, Ho) with three magnetic elements were synthesized as polycrystalline samples. The compounds crystalize in monoclinic structures with the space group $P2_1/n$. Magnetic properties of these hetero-tri-spin $3d$-… ▽ More The field of double perovskites is now advancing to three magnetic elements on the A, B and B$'$ sites. A series of iridium-based double perovskite compounds, $Ln_2$CoIrO$_6$ ($Ln$ = Eu, Tb, Ho) with three magnetic elements were synthesized as polycrystalline samples. The compounds crystalize in monoclinic structures with the space group $P2_1/n$. Magnetic properties of these hetero-tri-spin $3d$-$5d$-$4f$ systems were studied by magnetic susceptibility and field dependent magnetization in both DC and pulsed magnetic fields. All these compounds show ferrimagnetic transitions at temperatures $T_C$ above 100 K, which are attributable to antiferromagnetic coupling between Co$^{2+}$ and Ir$^{4+}$ spins. For Eu$_2$CoIrO$_6$, the magnetic properties are similar to those of La$_2$CoIrO$_6$. The Eu$^{3+}$ spins show Van Vleck paramagnetism that don't significantly interact with transition-metal cations. By contrast, Tb$_2$CoIrO$_6$ and Ho$_2$CoIrO$_6$ reveal a second transition to antiferromagnetic order below a lower temperature $T_N$. The temperature-induced ferrimagnetic-to-antiferromagnetic phase transition might be explained by a spin-reorientation transition. Moreover, a magnetic-field-induced spin-flop transition with a small hysteresis was observed below $T_N$ in these two compounds. The magnetic moment of all three compounds do not saturate up to 60 T at low temperatures. Moderate magnetocaloric effect was also observed in all three compounds. Our results should motivate further investigation of the spin configuration on single crystals of these iridium-based double perovskites. △ Less

Submitted 16 January, 2019; originally announced January 2019.

Comments: Accepted by Physical Review B

Journal ref: Physical Review B 99, 014438 2019

Transformation-mediated Plasticity in CuZr based Metallic Glass Composites: A Quantitative Mechanistic Understanding

Authors: B. A. Sun, K. K. Song, S. Pauly, P. Gararella, C. T. Liu, J. Eckert, Y. Yang

Abstract: In this paper, we present a thorough stress analysis of the Cu-Zr metallic-glass composite with embedded B2 particles subject to a martensitic transformation. Within the framework of the Eshelby theory, we are able to explain, in a quantitative manner, (1) the formation of three types of shear bands with distinct morphologies as observed experimentally in the severely deformed Cu-Zr metallic-glass… ▽ More In this paper, we present a thorough stress analysis of the Cu-Zr metallic-glass composite with embedded B2 particles subject to a martensitic transformation. Within the framework of the Eshelby theory, we are able to explain, in a quantitative manner, (1) the formation of three types of shear bands with distinct morphologies as observed experimentally in the severely deformed Cu-Zr metallic-glass composite and (2) the work hardening ability of the Cu-Zr metallic-glass composite as related to the coupled effects of elastic back stress and elastic mismatch caused by the martensitic transformation. Furthermore, we also discuss the issues about the stress affected zone of the individual B2 phase and the stability of the crystalline-amorphous interface. Given the general agreement between the theoretical and experimental findings, we believe that the outcome of our current work can lead to a deeper understanding of the transformation-induced plasticity in the Cu-Zr based metallic glass composites, which should be very useful to the design of the metallic-glass composites with improved ductility. △ Less

Submitted 11 March, 2016; v1 submitted 9 March, 2016; originally announced March 2016.

Comments: 32 pages, 11 figures

Structural Contribution to the Ferroelectric Fatigue in Lead Zirconate Titanate (PZT) Ceramics

Authors: Manuel Hinterstein, Jerome Rouquette, J. Haines, Ph. Papet, Julia Glaum, Michael Knapp, J. Eckert, M. Hoffman

Abstract: Many ferroelectric devices are based on doped lead zirconate titanate (PZT) ceramics with compositions near the morphotropic phase boundary (MPB), at which the relevant material's properties approach their maximum. Based on a synchrotron x-ray diffraction study of MPB PZT, bulk fatigue is unambiguously found to arise from a less effective field induced tetragonal-to-monoclinic transformation, at w… ▽ More Many ferroelectric devices are based on doped lead zirconate titanate (PZT) ceramics with compositions near the morphotropic phase boundary (MPB), at which the relevant material's properties approach their maximum. Based on a synchrotron x-ray diffraction study of MPB PZT, bulk fatigue is unambiguously found to arise from a less effective field induced tetragonal-to-monoclinic transformation, at which the degradation of the polarization flip** is detected by a less intense and more diffuse anomaly in the atomic displacement parameter of lead. The time dependence of the ferroelectric response on a structural level down to 250 $μ$s confirms this interpretation in the time scale of the piezolectric strain response. △ Less

Submitted 7 January, 2015; originally announced January 2015.

Journal ref: Physical Review B, the American Physical Society, 2014, 90, pp.094113

The Cycle Spectrum of Claw-free Hamiltonian Graphs

Authors: Jonas Eckert, Felix Joos, Dieter Rautenbach

Abstract: If $G$ is a claw-free hamiltonian graph of order $n$ and maximum degree $Δ$ with $Δ\geq 24$, then $G$ has cycles of at least $\min\left\{ n,\left\lceil\frac{3}{2}Δ\right\rceil\right\}-2$ many different lengths. If $G$ is a claw-free hamiltonian graph of order $n$ and maximum degree $Δ$ with $Δ\geq 24$, then $G$ has cycles of at least $\min\left\{ n,\left\lceil\frac{3}{2}Δ\right\rceil\right\}-2$ many different lengths. △ Less

Submitted 4 December, 2013; originally announced December 2013.

Comments: 9 pages

Correlation between Internal States and Strength in Bulk Metallic Glass

Authors: J. Tan, C. J. Li, Y. H. Jiang, R. Zhou, J. Eckert

Abstract: The internal states or local structures of bulk metallic glass (BMGs) can be well reflected from the changes of density, structural relaxation as well as the elastic constants. With the increasing free volume (FV) content, more local atomic clusters are capable of simultaneous plastic shear at different sites in the metallic glasses, inducing large plasticity. In this work, we report a close corre… ▽ More The internal states or local structures of bulk metallic glass (BMGs) can be well reflected from the changes of density, structural relaxation as well as the elastic constants. With the increasing free volume (FV) content, more local atomic clusters are capable of simultaneous plastic shear at different sites in the metallic glasses, inducing large plasticity. In this work, we report a close correlation between the internal states and strength in a BMG and discover that the yield strength can be changed by varying of the casting current, revealing that the yielding strength of BMGs is not only intrinsically associated with the glass transition, but also with the internal states, such as free volume and elastic properties. Such results may have some implications for understanding the correlations between the internal states and mechanical properties of BMGs. △ Less

Submitted 10 October, 2013; originally announced October 2013.

Comments: 8 pages, 3figures, The paper has been accepte by: PRICM: 8 Pacific Rim International Congress on Advanced Materialsand Processing. pp. 3199-3206. John Wiley & Sons, Inc. http://onlinelibrary.wiley.com/doi/10.1002/9781118792148.ch394/summary

Journal ref: PRICM: 8 Pacific Rim International Congress on Advanced Materialsand Processing, 2013

Polymeric Frameworks as Organic Semiconductors with Controlled Electronic Properties

Authors: Ken Sakaushi, Georg Nickerl, Hem Chandra Kandpal, Laura Cano-Cortés, Thomas Gemming, Jürgen Eckert, Stefan Kaskel, Jeroen van den Brink

Abstract: The rational assembly of monomers, in principle, enables the design of a specific periodicity of polymeric frameworks, leading to a tailored set of electronic structure properties in these solid-state materials. The further development of these emerging systems requires a combination of both experimental and theoretical studies. Here, we investigated the electronic structures of two-dimensional po… ▽ More The rational assembly of monomers, in principle, enables the design of a specific periodicity of polymeric frameworks, leading to a tailored set of electronic structure properties in these solid-state materials. The further development of these emerging systems requires a combination of both experimental and theoretical studies. Here, we investigated the electronic structures of two-dimensional polymeric frameworks based on triazine and benzene rings, by means of electrochemical techniques. The experimental density of states was obtained from quasi-open-circuit voltage measurements through galvanostatic intermittent titration technique, which we show to be in excellent agreement with first principles calculations performed for two and three-dimensional structures of these polymeric frameworks. These findings suggest that the electronic properties do not only depend on the number of stacked layers but also on the ratio of the different aromatic rings. △ Less

Submitted 1 July, 2013; originally announced July 2013.

Journal ref: J. Phys. Chem. Lett. 4, 2977-2981 (2013)

Electromagnetic response of a highly granular hadronic calorimeter

Authors: C. Adloff, J. Blaha, J. -J. Blaising, C. Drancourt, A. Espargilière, R. Gaglione, N. Geffroy, Y. Karyotakis, J. Prast, G. Vouters, K. Francis, J. Repond, J. Smith, L. Xia, E. Baldolemar, J. Li, S. T. Park, M. Sosebee, A. P. White, J. Yu, Y. Mikami, N. K. Watson T. Goto, G. Mavromanolakis, M. A. Thomson, D. R. Ward W. Yan , et al. (142 additional authors not shown)

Abstract: The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the hadronic calorimeter, one option is a highly granular sampling calorimeter with steel as absorber and scintillator layers as active material. High granularity is obtained by segmenting the scintillator into small tiles individuall… ▽ More The CALICE collaboration is studying the design of high performance electromagnetic and hadronic calorimeters for future International Linear Collider detectors. For the hadronic calorimeter, one option is a highly granular sampling calorimeter with steel as absorber and scintillator layers as active material. High granularity is obtained by segmenting the scintillator into small tiles individually read out via silicon photo-multipliers (SiPM). A prototype has been built, consisting of thirty-eight sensitive layers, segmented into about eight thousand channels. In 2007 the prototype was exposed to positrons and hadrons using the CERN SPS beam, covering a wide range of beam energies and incidence angles. The challenge of cell equalization and calibration of such a large number of channels is best validated using electromagnetic processes. The response of the prototype steel-scintillator calorimeter, including linearity and uniformity, to electrons is investigated and described. △ Less

Submitted 8 June, 2011; v1 submitted 20 December, 2010; originally announced December 2010.

Report number: DESY 10-241

Journal ref: JINST 6 (2011) P04003

Measurement of the 3-D Born-Oppenheimer Potential of a Proton in a Hydrogen Bonded System using Deep Inelastic Neutron Scattering: The Superprotonic Conductor Rb3H(SO4)2

Authors: D. Homouz, G. F. Reiter, J. Eckert, J. Mayers, R. Blinc

Abstract: Born-Oppenheimer (BO) potential in any material. The proton potential surfaces in the hydrogen bonded superprotonic conductor Rb3H(SO4)2 are extracted from the momentum distribution measured using Deep Inelastic Neutron Scattering(DINS). The potential has a single minimum along the bond direction, which accounts for the absence of the antiferroelectric transition seen in the deuterated material,… ▽ More Born-Oppenheimer (BO) potential in any material. The proton potential surfaces in the hydrogen bonded superprotonic conductor Rb3H(SO4)2 are extracted from the momentum distribution measured using Deep Inelastic Neutron Scattering(DINS). The potential has a single minimum along the bond direction, which accounts for the absence of the antiferroelectric transition seen in the deuterated material, and a saddle point off the bond direction for tunneling into the next well with a barrier height of 350 meV. The measured potential is in qualitative agreement with phenomenological double Morse potentials that have been used to describe hydrogen bonds in other systems. △ Less

Submitted 26 January, 2007; v1 submitted 26 January, 2007; originally announced January 2007.

Superconducting properties of nanocrystalline MgB$_2$

Authors: B Lorenz, O Perner, J Eckert, C W Chu

Abstract: Nanocrystalline MgB$_2$ produced by mechanical alloying has been shown to exhibit enhanced superconducting properties such as increased pinning and higher critical currents. However, the effects of the synthesis process on the intrinsic superconducting properties have not been addressed yet. We have investigated the superconducting gap structure of nanocrystalline MgB$_2$ pellets synthesized by… ▽ More Nanocrystalline MgB$_2$ produced by mechanical alloying has been shown to exhibit enhanced superconducting properties such as increased pinning and higher critical currents. However, the effects of the synthesis process on the intrinsic superconducting properties have not been addressed yet. We have investigated the superconducting gap structure of nanocrystalline MgB$_2$ pellets synthesized by high-energy ball milling employing specific heat measurements. We found that the larger $σ$-gap decreased whereas the smaller $π$-gap slightly increased in ball milled MgB$_2$ as compared to bulk samples synthesized along the standard routes. The data show that the ball milling process introduces defects that enhance the interband scattering similar to irradiation with neutrons. The reduction of the $σ$-gap explains the lower superconducting transition temperature of 33 K. △ Less

Submitted 22 July, 2006; originally announced July 2006.

Journal ref: Supercond. Sci. Technol. 19 (2006) 912

Comparative Study of Dense Bulk MgB$_2$ Materials Prepared by Different Methods

Authors: V. N. Narozhnyi, G. Fuchs, A. Handstein, A. Gümbel, J. Eckert, K. Nenkov, D. Hinz, O. Gutfleisch, A. Wälte, L. N. Bogacheva, I. E. Kostyleva, K. -H. Müller, L. Schultz

Abstract: We report on the results of a comparative investigation of highly dense bulk MgB$_2$ samples prepared by three methods: (i) hot deformation; (ii) high pressure sintering; and (iii) mechanical alloying of Mg and B powders with subsequent hot compaction. All types of samples were studied by ac-susceptibility, dc-magnetization and resistivity measurements in magnetic fields up to $μ_0H=160$ kOe. A… ▽ More We report on the results of a comparative investigation of highly dense bulk MgB$_2$ samples prepared by three methods: (i) hot deformation; (ii) high pressure sintering; and (iii) mechanical alloying of Mg and B powders with subsequent hot compaction. All types of samples were studied by ac-susceptibility, dc-magnetization and resistivity measurements in magnetic fields up to $μ_0H=160$ kOe. A small but distinct anisotropy of the upper critical field $H_{c2}^{a,b}/H_{c2}^{c}\sim1.2$ connected with some texture of MgB$_2$ grains was found for the hot deformed samples. The samples prepared by high pressure sintering as well as by mechanical alloying show improved superconducting properties, including high upper critical fields $H_{c2}$ ($μ_0H_{c2}(0)\sim23$ T), irreversibility fields $H_{irr}$ which are strongly shifted towards higher values $H_{irr}(T)\sim0.8H_{c2}(T)$ and high critical current $J_c$ ($J_c=10^5$ A/cm$^2$ at 20 K and 1 T). △ Less

Submitted 26 June, 2002; originally announced June 2002.

Comments: 3 pages including 6 figures. Presented at SCRM2002 conference. Submitted to the J. Supercond.: Inc. Novel Magnetism

Journal ref: J. Supercond. 15 (2002) 599-601.

Improved superconducting properties in nanocrystalline bulk MgB_2

Authors: A. Gümbel, J. Eckert, G. Fuchs, K. Nenkov, K. -H. Müller, L. Schultz

Abstract: Highly dense nanocrystalline MgB_2 bulk superconductors with distinctly improved pinning were prepared by mechanical alloying of Mg and B powders and hot compaction at ambient temperatures. The nanocrystalline samples reveal high critical current densities of 105 A/cm2 at 20 K and 1 T together with a strongly shifted irreversibility line towards higher fields resulting in H_irr(T) ~ 0.8 H_c2(T),… ▽ More Highly dense nanocrystalline MgB_2 bulk superconductors with distinctly improved pinning were prepared by mechanical alloying of Mg and B powders and hot compaction at ambient temperatures. The nanocrystalline samples reveal high critical current densities of 105 A/cm2 at 20 K and 1 T together with a strongly shifted irreversibility line towards higher fields resulting in H_irr(T) ~ 0.8 H_c2(T), whereas typically H_irr(T) ~ 0.5 H_c2(T) is observed for bulk untextured samples. These values exceed that of all other so far reported bulk samples and are in the range of the values of thin films. The improved pinning of this material which mainly consists of spherical grains of about 40-100 nm in size is attributed to the large number of grain boundaries. △ Less

Submitted 30 November, 2001; originally announced November 2001.

Comments: 14 pages including 4 figures