-
Leveraging yield buckling to achieve ideal shock absorbers
Authors:
Wenfeng Liu,
Shahram Janbaz,
David Dykstra,
Bernard Ennis,
Corentin Coulais
Abstract:
The ideal shock absorber combines high stiffness with high energy absorption whilst retaining structural integrity after impact and is scalable for industrial production. So far no structure meets all of these criteria. Here, we introduce a special occurrence of plastic buckling as a design concept for mechanical metamaterials that combine all the elements required of an ideal shock absorber. By s…
▽ More
The ideal shock absorber combines high stiffness with high energy absorption whilst retaining structural integrity after impact and is scalable for industrial production. So far no structure meets all of these criteria. Here, we introduce a special occurrence of plastic buckling as a design concept for mechanical metamaterials that combine all the elements required of an ideal shock absorber. By striking a balance between plastic deformation and buckling, which we term yield buckling, these metamaterials exhibit sequential, maximally dissipative collapse combined with high strength and the preservation of structural integrity. Unlike existing structures, this design paradigm is applicable to all elastoplastic materials at any length scale and hence will lead to a new generation of shock absorbers with enhanced safety and sustainabilty in a myriad of high-tech applications.
△ Less
Submitted 7 October, 2023;
originally announced October 2023.
-
Inverse design of multishape metamaterials
Authors:
David M. J. Dykstra,
Corentin Coulais
Abstract:
Multishape metamaterials exhibit more than one target shape change, e.g. the same metamaterial can have either a positive or negative Poisson's ratio. So far, multishape metamaterials have mostly been obtained by trial-and-error. The inverse design of multiple target deformations in such multishape metamaterials remains a largely open problem. Here, we demonstrate that it is possible to design met…
▽ More
Multishape metamaterials exhibit more than one target shape change, e.g. the same metamaterial can have either a positive or negative Poisson's ratio. So far, multishape metamaterials have mostly been obtained by trial-and-error. The inverse design of multiple target deformations in such multishape metamaterials remains a largely open problem. Here, we demonstrate that it is possible to design metamaterials with multiple nonlinear deformations of arbitrary complexity. To this end, we introduce a novel sequential nonlinear method to design multiple target modes. We start by iteratively adding local constraints that match a first specific target mode; we then continue from the obtained geometry by iteratively adding local constraints that match a second target mode; and so on. We apply this sequential method to design up to 3 modes with complex shapes and we show that this method yields at least an 85% success rate. Yet we find that these metamaterials invariably host additional spurious modes, whose number grows with the number of target modes and their complexity, as well as the system size. Our results highlight an inherent trade-off between design freedom and design constraints and pave the way towards multi-functional materials and devices.
△ Less
Submitted 24 April, 2023;
originally announced April 2023.
-
Buckling Metamaterials for Extreme Vibration Dam**
Authors:
David M. J. Dykstra,
Coen Lenting,
Alexandre Masurier,
Corentin Coulais
Abstract:
Dam** mechanical resonances is a formidable challenge in an increasing number of applications. Many of the passive dam** methods rely on using low stiffness dissipative elements, complex mechanical structures or electrical systems, while active vibration dam** systems typically add an additional layer of complexity. However, in many cases, the reduced stiffness or additional complexity and m…
▽ More
Dam** mechanical resonances is a formidable challenge in an increasing number of applications. Many of the passive dam** methods rely on using low stiffness dissipative elements, complex mechanical structures or electrical systems, while active vibration dam** systems typically add an additional layer of complexity. However, in many cases, the reduced stiffness or additional complexity and mass render these vibration dam** methods unfeasible. Here, we introduce a method for passive vibration dam** by allowing buckling of the primary load path, which sets an upper limit for vibration transmission: the transmitted acceleration saturates at a maximum value, no matter what the input acceleration is. This nonlinear mechanism leads to an extreme dam** coefficient tan delta ~0.23 in our metal metamaterial|orders of magnitude larger than the linear dam** of traditional lightweight structural materials. We demonstrate this principle experimentally and numerically in free-standing rubber and metal mechanical metamaterials over a range of accelerations, and show that bi-directional buckling can further improve its performance. Buckling metamaterials pave the way towards extreme vibration dam** without mass or stiffness penalty, and as such could be applicable in a multitude of high-tech applications, including aerospace structures, vehicles and sensitive instruments.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Apptainer Without Setuid
Authors:
Dave Dykstra
Abstract:
Apptainer (formerly known as Singularity) since its beginning implemented many of its container features with the assistance of a setuid-root program. It still supports that mode, but as of version 1.1.0 it no longer uses setuid by default. This is feasible because it now can mount squashfs filesystems, ext3 filesystems, and overlay filesystems using unprivileged user namespaces and FUSE. It also…
▽ More
Apptainer (formerly known as Singularity) since its beginning implemented many of its container features with the assistance of a setuid-root program. It still supports that mode, but as of version 1.1.0 it no longer uses setuid by default. This is feasible because it now can mount squashfs filesystems, ext3 filesystems, and overlay filesystems using unprivileged user namespaces and FUSE. It also now enables unprivileged users to build containers, even without requiring system administrators to configure /etc/subuid and /etc/subgid unlike other "rootless" container systems. As a result, all the unprivileged functions can be used nested inside of another container, even if the container runtime prevents any elevated privileges. As of version 1.2.0 Apptainer also supports completely unprivileged encryption of Singularity Image Format (SIF) container files. Performance with a particularly challenging HEP benchmark using the FUSE-based mounts both with and without encryption is essentially identical to the previous methods that required elevated privileges to use the Linux kernel-based counterparts.
△ Less
Submitted 22 September, 2023; v1 submitted 25 August, 2022;
originally announced August 2022.
-
The Extreme Mechanics of Viscoelastic Metamaterials
Authors:
David M. J. Dykstra,
Shahram Janbaz,
Corentin Coulais
Abstract:
Mechanical metamaterials made of flexible building blocks can exhibit a plethora of extreme mechanical responses, such as negative elastic constants, shape-changes, programmability and memory. To date, dissipation has largely remained overlooked for such flexible metamaterials. As a matter of fact, extensive care has often been devoted in the constitutive materials' choice to avoid strong dissipat…
▽ More
Mechanical metamaterials made of flexible building blocks can exhibit a plethora of extreme mechanical responses, such as negative elastic constants, shape-changes, programmability and memory. To date, dissipation has largely remained overlooked for such flexible metamaterials. As a matter of fact, extensive care has often been devoted in the constitutive materials' choice to avoid strong dissipative effects. However, in an increasing number of scenarios, where metamaterials are loaded dynamically, dissipation can not be ignored. In this review, we show that the interplay between mechanical instabilities and viscoelasticity can be crucial and can be harnessed to obtain new functionalities. We first show that this interplay is key to understanding the dynamical behaviour of flexible dissipative metamaterials that use buckling and snap** as functional mechanisms. We further discuss the new opportunities that spatial patterning of viscoelastic properties offer for the design of mechanical metamaterials with properties that depend on loading rate.
△ Less
Submitted 20 June, 2022; v1 submitted 4 April, 2022;
originally announced April 2022.
-
Inverted and programmable Poynting effects in metamaterials
Authors:
Aref Ghorbani,
David Dykstra,
Corentin Coulais,
Daniel Bonn,
Erik van der Linden,
Mehdi Habibi
Abstract:
The Poynting effect generically manifests itself as the extension of the material in the direction perpendicular to an applied shear deformation (torsion) and is a material parameter hard to design. Unlike isotropic solids, in designed structures, peculiar couplings between shear and normal deformations can be achieved and exploited for practical applications. Here, we engineer a metamaterial that…
▽ More
The Poynting effect generically manifests itself as the extension of the material in the direction perpendicular to an applied shear deformation (torsion) and is a material parameter hard to design. Unlike isotropic solids, in designed structures, peculiar couplings between shear and normal deformations can be achieved and exploited for practical applications. Here, we engineer a metamaterial that can be programmed to contract or extend under torsion and undergo nonlinear twist under compression. First, we show that our system exhibits a novel type of inverted Poynting effect, where axial compression induces a nonlinear torsion. Then the Poynting modulus of the structure is programmed from initial negative values to zero and positive values via a pre-compression applied prior to torsion. Our work opens avenues for programming nonlinear elastic moduli of materials and tuning the couplings between shear and normal responses by rational design. Obtaining inverted and programmable Poynting effects in metamaterials inspires diverse applications from designing machine materials, soft robots and actuators to engineering biological tissues, implants and prosthetic devices functioning under compression and torsion.
△ Less
Submitted 18 May, 2021; v1 submitted 22 February, 2021;
originally announced February 2021.
-
Oligomodal mechanical metamaterials
Authors:
Aleksi Bossart,
David M. J. Dykstra,
Jop van der Laan,
Corentin Coulais
Abstract:
Mechanical metamaterials are artifical composites that exhibit a wide range of advanced functionalities such as negative Poisson's ratio, shape-shifting, topological protection, multistability, and enhanced energy dissipation. To date, most metamaterials have a single property, e.g. a single shape change, or are pluripotent, \emph{i.e.} they can have many different responses, but require complex a…
▽ More
Mechanical metamaterials are artifical composites that exhibit a wide range of advanced functionalities such as negative Poisson's ratio, shape-shifting, topological protection, multistability, and enhanced energy dissipation. To date, most metamaterials have a single property, e.g. a single shape change, or are pluripotent, \emph{i.e.} they can have many different responses, but require complex actuation protocols. Here, we introduce a novel class of oligomodal metamaterials that encode a few distinct properties that can be selectively controlled under uniaxial compression. In particular, we realise a metamaterial that has a negative (positive) Poisson's ratio for low (high) compression rate. The ability of our oligomodal metamaterials to host multiple mechanical responses within a single structure makes them an early example of multi-functional matter and paves the way towards robust and adaptable devices.
△ Less
Submitted 9 June, 2020;
originally announced June 2020.
-
Viscoelastic Metamaterials
Authors:
David M. J. Dykstra,
Joris Busink,
Bernard Ennis,
Corentin Coulais
Abstract:
Mechanical metamaterials are artificial composites with tunable advanced mechanical properties. Particularly interesting types of mechanical metamaterials are flexible metamaterials, which harness internal rotations and instabilities to exhibit programmable deformations. However, to date such materials have mostly been considered using nearly purely elastic constituents such as neo-Hookean rubbers…
▽ More
Mechanical metamaterials are artificial composites with tunable advanced mechanical properties. Particularly interesting types of mechanical metamaterials are flexible metamaterials, which harness internal rotations and instabilities to exhibit programmable deformations. However, to date such materials have mostly been considered using nearly purely elastic constituents such as neo-Hookean rubbers. Here we explore experimentally the mechanical snap-through response of metamaterials that are made of constituents that exhibit large viscoelastic relaxation effects, encountered in the vast majority of rubbers, in particular in 3D printed rubbers. We show that they exhibit a very strong sensitivity to the loading rate. In particular, the mechanical instability is strongly affected beyond a certain loading rate. We rationalize our findings with a compliant mechanism model augmented with viscoelastic interactions, which captures qualitatively well the reported behavior, suggesting that the sensitivity to loading rate stems from the nonlinear and inhomogeneous deformation rate, provoked by internal rotations. Our findings bring a novel understanding of metamaterials in the dynamical regime and opens up avenues for the use of metamaterials for dynamical shape-changing as well as vibration and impact dam** applications.
△ Less
Submitted 26 April, 2019;
originally announced April 2019.
-
HEP Software Foundation Community White Paper Working Group -- Conditions Data
Authors:
Paul Laycock,
Marko Bracko,
Marco Clemencic,
Dave Dykstra,
Andrea Formica,
Giacomo Govi,
Michel Jouvin,
David Lange,
Lynn Wood
Abstract:
To produce the best physics results, high energy physics experiments require access to calibration and other non-event data during event data processing. These conditions data are typically stored in databases that provide versioning functionality, allowing physicists to make improvements while simultaneously guaranteeing the reproducibility of their results. With the increased complexity of moder…
▽ More
To produce the best physics results, high energy physics experiments require access to calibration and other non-event data during event data processing. These conditions data are typically stored in databases that provide versioning functionality, allowing physicists to make improvements while simultaneously guaranteeing the reproducibility of their results. With the increased complexity of modern experiments, and the evolution of computing models that demand large scale access to conditions data, the solutions for managing this access have evolved over time. In this white paper we give an overview of the conditions data access problem, present convergence on a common solution and present some considerations for the future.
△ Less
Submitted 16 January, 2019;
originally announced January 2019.
-
A Roadmap for HEP Software and Computing R&D for the 2020s
Authors:
Johannes Albrecht,
Antonio Augusto Alves Jr,
Guilherme Amadio,
Giuseppe Andronico,
Nguyen Anh-Ky,
Laurent Aphecetche,
John Apostolakis,
Makoto Asai,
Luca Atzori,
Marian Babik,
Giuseppe Bagliesi,
Marilena Bandieramonte,
Sunanda Banerjee,
Martin Barisits,
Lothar A. T. Bauerdick,
Stefano Belforte,
Douglas Benjamin,
Catrin Bernius,
Wahid Bhimji,
Riccardo Maria Bianchi,
Ian Bird,
Catherine Biscarat,
Jakob Blomer,
Kenneth Bloom,
Tommaso Boccali
, et al. (285 additional authors not shown)
Abstract:
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for…
▽ More
Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade.
△ Less
Submitted 19 December, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
HEPCloud, a New Paradigm for HEP Facilities: CMS Amazon Web Services Investigation
Authors:
Burt Holzman,
Lothar A. T. Bauerdick,
Brian Bockelman,
Dave Dykstra,
Ian Fisk,
Stuart Fuess,
Gabriele Garzoglio,
Maria Girone,
Oliver Gutsche,
Dirk Hufnagel,
Hyunwoo Kim,
Robert Kennedy,
Nicolo Magini,
David Mason,
Panagiotis Spentzouris,
Anthony Tiradani,
Steve Timm,
Eric W. Vaandering
Abstract:
Historically, high energy physics computing has been performed on large purpose-built computing systems. These began as single-site compute facilities, but have evolved into the distributed computing grids used today. Recently, there has been an exponential increase in the capacity and capability of commercial clouds. Cloud resources are highly virtualized and intended to be able to be flexibly de…
▽ More
Historically, high energy physics computing has been performed on large purpose-built computing systems. These began as single-site compute facilities, but have evolved into the distributed computing grids used today. Recently, there has been an exponential increase in the capacity and capability of commercial clouds. Cloud resources are highly virtualized and intended to be able to be flexibly deployed for a variety of computing tasks. There is a growing nterest among the cloud providers to demonstrate the capability to perform large-scale scientific computing. In this paper, we discuss results from the CMS experiment using the Fermilab HEPCloud facility, which utilized both local Fermilab resources and virtual machines in the Amazon Web Services Elastic Compute Cloud. We discuss the planning, technical challenges, and lessons learned involved in performing physics workflows on a large-scale set of virtualized resources. In addition, we will discuss the economics and operational efficiencies when executing workflows both in the cloud and on dedicated resources.
△ Less
Submitted 29 September, 2017;
originally announced October 2017.