-
Adjusting the numerical viscosity in the Godunov-like SPH method at modeling compressible flows
Authors:
A. N. Parshikov,
S. A. Medin,
G. D. Rublev,
S. A. Dyachkov
Abstract:
The paper proposes a way to control the viscosity of numerical approximation in the contact SPH method. This variant of SPH contains momentum and energy fluxes in the right-hand sides of the equations, which are calculated using the solution of the Riemann problem between each pair of neighboring particles within the smoothing kernel support radius, which is similar to the procedure for calculatin…
▽ More
The paper proposes a way to control the viscosity of numerical approximation in the contact SPH method. This variant of SPH contains momentum and energy fluxes in the right-hand sides of the equations, which are calculated using the solution of the Riemann problem between each pair of neighboring particles within the smoothing kernel support radius, which is similar to the procedure for calculating fluxes across cell boundaries in Godunov schemes. Such SPH method does not require the use of artificial viscosity, because the significant numerical viscosity is already introduced by a Riemann problem solution. The magnitude of numerical viscosity decreases linearly with particle size, however, it becomes comparable with the physical viscosity for most materials when the particle size is about $\thicksim 1\,$nm, which hampers the correct accounting for viscous effects in real-life problems. In this study we develop a method for reducing the viscous stresses of numerical origin, for which a correcting viscous stress tensor is constructed on the basis of the analytical solution for discontinuous viscous flow. The use of such correction makes it possible to improve the agreement with the experiment in the simulation of viscous flows.
△ Less
Submitted 14 June, 2023;
originally announced June 2023.
-
A wide-range semiclassical self-consistent average atom model
Authors:
A. S. Polyukhin,
S. A. Dyachkov,
P. R. Levashov
Abstract:
Discovery of material properties at extremes, which are essential for high energy density physics development, requires the most advanced experimental facilities, theories, and computations. Nowadays it is possible to model properties of matter in such conditions using the state-of-the-art density functional theory (DFT) or path-integral Monte--Carlo (PIMC) approaches with remarkable precision. Ho…
▽ More
Discovery of material properties at extremes, which are essential for high energy density physics development, requires the most advanced experimental facilities, theories, and computations. Nowadays it is possible to model properties of matter in such conditions using the state-of-the-art density functional theory (DFT) or path-integral Monte--Carlo (PIMC) approaches with remarkable precision. However, fundamental and computational limitations of these methods impede their practical usage while wide-range thermodynamic and transport models of plasma are required. As a consequence, an average atom (AA) framework is still relevant today and has been attracting more and more attention lately. The self-consistent field and electron density in an atomic cell is usually obtained using the Thomas--Fermi (TF), Hartree--Fock (HF), Kohn--Sham (KS) approaches, or their extensions. In this study we present the AA model, where semiclassical wave functions are used for bound states, while free electrons are approximated by the TF model with a thermodynamically consistent energy boundary. The model is compared in various regions of temperatures and pressures with the reference data: Saha model for rarefied plasma, DFT for warm dense matter, and experimental shock Hugoniot data. It is demonstrated that a single AA model may provide a reasonable agreement with the established techniques at low computational cost and with stable convergence of the self-consistent field.
△ Less
Submitted 26 February, 2023; v1 submitted 23 September, 2022;
originally announced September 2022.
-
Direct imaging of shock wave splitting in diamond at Mbar pressures
Authors:
S. S. Makarov,
S. A. Dyachkov,
T. A. Pikuz,
K. Katagiri,
V. V. Zhakhovsky,
N. A. Inogamov,
V. A. Khokhlov,
A. S. Martynenko,
B. Albertazzi,
G. Rigon,
P. Mabey,
N. Hartley,
Y. Inubushi,
K. Miyanishi,
K. Sueda,
T. Togashi,
M. Yabashi,
T. Yabuuchi,
R. Kodama,
S. A. Pikuz,
M. Koenig,
N. Ozaki
Abstract:
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under me…
▽ More
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under megabar (Mbar) pressure, even a solid with high strength exhibits plastic properties, causing the shock wave to split in two. This phenomenon is described by theoretical models, but without direct experimental measurements to confirm them, their validity is still in doubt. Here, we present the results of an experiment in which the evolution of the coupled elastic-plastic wave structure in diamond was directly observed and studied with submicron spatial resolution, using the unique capabilities of the X-ray free-electron laser. The direct measurements allowed, for the first time, the fitting and validation of a strength model for diamond in the range of several Mbar by performing continuum mechanics simulations in 2D geometry. The presented experimental approach to the study of shock waves in solids opens up new possibilities for the direct verification and construction of the equations of state of matter in the ultra-high pressure range, which are relevant for the solution of a variety of problems in high energy density physics.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Jet effusion from a metal droplet irradiated by a polarized ultrashort laser pulse
Authors:
S. Yu. Grigoryev,
B. V. Lakatosh,
P. M. Solyankin,
M. S. Krivokorytov,
V. V. Zhakhovsky,
S. A. Dyachkov,
C. -D. Ohl,
A. P. Shkurinov,
V. V. Medvedev
Abstract:
Fragmentation of liquid metal droplets irradiated by linearly and circularly polarized femtosecond laser pulses is observed in our experiment. The obtained shadowgraph snapshots demonstrate that a circularly polarized pulse may produce several randomly-oriented jets effused from the expanding droplets, while a linearly polarized laser pulse generates strictly the cruciform jets. The latter orienta…
▽ More
Fragmentation of liquid metal droplets irradiated by linearly and circularly polarized femtosecond laser pulses is observed in our experiment. The obtained shadowgraph snapshots demonstrate that a circularly polarized pulse may produce several randomly-oriented jets effused from the expanding droplets, while a linearly polarized laser pulse generates strictly the cruciform jets. The latter orientation is tied with polarization plane, rotation of which causes rotation of the cruciform jets by the same angle. To shed light on the experimental data we performed molecular dynamics simulation of droplet expansion induced by angle-dependent heating.
Our simulation shows that the jet directions are determined by an oriented angle-dependent energy distribution within a frontal hemisphere layer of droplet after absorption of linearly polarized light. As a result, the produced flow velocity field guided by surface tension forms two high-speed opposite jets oriented across the electric field vector as in our experiment.
A shock-wave pulse generated in the frontal layer has angle-dependent amplitude inherited from the oriented energy deposition. The release part of shock pulse produces a cavitation zone nearby the droplet center, and thus an expanding spherical shell is formed from the droplet. The flow velocities within a rearside hemisphere of the shell, produced after reflection of the shock wave from the rear side of droplet, generate two low-speed opposite jets oriented along the electric field vector. Thus we found that the cruciform jets are originated independently from the frontal and rear sides of droplet, and a pair of frontal jets is faster than a pair of rearside jets.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Liquid tin droplet fragmentation by ultra-short laser pulse
Authors:
S. Yu. Grigoryev,
S. A. Dyachkov,
V. A. Khokhlov,
V. V. Zhakhovsky,
A. N. Parshikov,
N. A. Inogamov
Abstract:
The fragmentation of a liquid metal droplet induced by a nanosecond laser pulse has been studied well. However, the fragmentation mechanism may be different, when a subpicosecond laser pulse is applied. To discover the details of the fragmentation process, we perform a hydrodynamic simulation of a liquid tin droplet irradiated by a femtosecond laser pulse. We have found that the pressure pulse ind…
▽ More
The fragmentation of a liquid metal droplet induced by a nanosecond laser pulse has been studied well. However, the fragmentation mechanism may be different, when a subpicosecond laser pulse is applied. To discover the details of the fragmentation process, we perform a hydrodynamic simulation of a liquid tin droplet irradiated by a femtosecond laser pulse. We have found that the pressure pulse induced by an instantaneous temperature growth in the skin layer propagates from the one side of the surface of a spherical droplet and focuses in its center; at the release a big cavity is formed at the center of a droplet; the pressure wave release at the backside surface may cause the spallation.
△ Less
Submitted 15 February, 2019; v1 submitted 15 December, 2018;
originally announced January 2019.
-
Expansion and fragmentation of liquid metal droplet by a short laser pulse
Authors:
S. Yu. Grigoryev,
B. V. Lakatosh,
M. S. Krivokorytov,
V. V. Zhakhovsky,
S. A. Dyachkov,
D. K. Ilnitsky,
K. P. Migdal,
N. A. Inogamov,
A. Yu. Vinokhodov,
V. O. Kompanets,
Yu. V. Sidelnikov,
V. M. Krivtsun,
K. N. Koshelev,
V. V. Medvedev
Abstract:
We report an experimental and numerical investigation of the fragmentation mechanisms of micrometer-sized metal droplet irradiated by ultrashort laser pulses. The results of the experiment show that the fast one-side heating of such a droplet may lead to either symmetric or asymmetric expansion followed by different fragmentation scenarios. To unveil the underlying processes leading to fragmentati…
▽ More
We report an experimental and numerical investigation of the fragmentation mechanisms of micrometer-sized metal droplet irradiated by ultrashort laser pulses. The results of the experiment show that the fast one-side heating of such a droplet may lead to either symmetric or asymmetric expansion followed by different fragmentation scenarios. To unveil the underlying processes leading to fragmentation we perform simulation of liquid-tin droplet expansion produced by the initial conditions similar to those in experiment using the smoothed particle hydrodynamics (SPH) method. Simulation demonstrates that a thin heated surface layer generates a ultrashort shock wave propagating from the frontal side to rear side of the droplet. Convergence of such shock wave followed by a rarefaction tale to the droplet center results in the cavitation of material inside the central region by the strong tensile stress. Reflection of the shock wave from the rear side of droplet produces another region of highly stretched material where the spallation may occur producing a thin spallation layer moving with a velocity higher than expansion of the central shell after cavitation. It is shown both experimentally and numerically that the threshold laser intensity necessary for the spallation is higher than the threshold required to induce cavitation in the central region of droplet. Thus, the regime of asymmetrical expansion is realized if the laser intensity exceeds the spallation threshold. The transverse and longitudinal expansion velocities obtained in SPH simulations of different regimes of expansion are agreed well with our experimental data.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
-
Parallel SPH modeling using dynamic domain decomposition and load balancing displacement of Voronoi subdomains
Authors:
M. S. Egorova,
S. A. Dyachkov,
A. N. Parshikov,
V. V. Zhakhovsky
Abstract:
A highly adaptive load balancing algorithm for parallel simulations using particle methods, such as molecular dynamics and smoothed particle hydrodynamics (SPH), is developed. Our algorithm is based on the dynamic spatial decomposition of simulated material samples between Voronoi subdomains, where each subdomain with all its particles is handled by a single computational process which is typicall…
▽ More
A highly adaptive load balancing algorithm for parallel simulations using particle methods, such as molecular dynamics and smoothed particle hydrodynamics (SPH), is developed. Our algorithm is based on the dynamic spatial decomposition of simulated material samples between Voronoi subdomains, where each subdomain with all its particles is handled by a single computational process which is typically run on a single CPU core of a multiprocessor computing cluster.
The algorithm displaces the positions of neighbor Voronoi subdomains in accordance with the local load imbalance between the corresponding processes. It results in particle transfers from heavy-loaded processes to less-loaded ones. Iteration of the algorithm puts into alignment the processor loads. Convergence to a well-balanced decomposition from imbalanced one is improved by the usage of multi-body terms in the balancing displacements.
The high adaptability of the balancing algorithm to simulation conditions is illustrated by SPH modeling of the dynamic behavior of materials under extreme conditions, which are characterized by large pressure and velocity gradients, as a result of which the spatial distribution of particles varies greatly in time. The higher parallel efficiency of our algorithm in such conditions is demonstrated by comparison with the corresponding static decomposition of the computational domain. Our algorithm shows almost perfect strong scalability in tests using from tens to several thousand processes.
△ Less
Submitted 8 June, 2018; v1 submitted 14 May, 2018;
originally announced May 2018.
