-
Resistivity, Hall effect, and anisotropic superconducting coherence lengths of HgBa$_2$CaCu$_2$O$_{6+δ}$ thin films with different morphology
Authors:
H. Richter,
W. Lang,
M. Peruzzi,
H. Hattmansdorfer,
J. H. Durrell,
J. D. Pedarnig
Abstract:
Thin films of the high-temperature superconductor HgBa$_2$CaCu$_2$O$_{6+δ}$ have been prepared on SrTiO$_3$ substrates by pulsed-laser deposition of precursor films and subsequent annealing in mercury-vapor atmosphere. The microstructural properties of such films can vary considerably and have been analyzed by x-ray diffraction and atomic force microscopy. Whereas the resistivity is significantly…
▽ More
Thin films of the high-temperature superconductor HgBa$_2$CaCu$_2$O$_{6+δ}$ have been prepared on SrTiO$_3$ substrates by pulsed-laser deposition of precursor films and subsequent annealing in mercury-vapor atmosphere. The microstructural properties of such films can vary considerably and have been analyzed by x-ray diffraction and atomic force microscopy. Whereas the resistivity is significantly enhanced in samples with coarse-grained structure, the Hall effect shows little variation. This disparity is discussed based on models for transport properties in granular materials. We find that, despite of the morphological variation, all samples have similar superconducting properties. The critical temperatures $T_c \sim 121.2$ K $\dots 122.0$ K, resistivity, and Hall data indicate that the samples are optimally doped. The analyses of superconducting order parameter fluctuations in zero and finite magnetic fields yield the in-plane $ξ_{ab}(0) \sim 2.3$ nm $\dots 2.8$ nm and out-of-plane $ξ_{c}(0) \sim 0.17$ nm $ \dots 0.24$ nm Ginzburg-Landau coherence lengths at zero temperature. Hall measurements provide estimates of carrier scattering defects in the normal state and vortex pinning properties in the superconducting state inside the grains.
△ Less
Submitted 23 December, 2020;
originally announced December 2020.
-
Successful production of Solution Blow Spun YBCO+Ag complex ceramics
Authors:
A. L. Pessoa,
M. J. Raine,
D. P. Hampshire,
D. K. Namburi,
J. H. Durrell,
R. Zadorosny
Abstract:
YBCO fabrics composed of nanowires, produced by solution blow spinning (SBS) are so brittle that the Lorentz force produced by induced currents can be strong enough to damage them. On the other hand, it is known that silver addition improves the mechanical and flux pinning properties of ceramic superconductors. Thus, in this work, we show how we successfully obtained a polymeric precursor solution…
▽ More
YBCO fabrics composed of nanowires, produced by solution blow spinning (SBS) are so brittle that the Lorentz force produced by induced currents can be strong enough to damage them. On the other hand, it is known that silver addition improves the mechanical and flux pinning properties of ceramic superconductors. Thus, in this work, we show how we successfully obtained a polymeric precursor solution containing YBCO$+$Ag salts, which can be spun by the SBS route to produce ceramic samples. Yttrium, barium, copper, and silver metal acetates, and polyvinylpyrrolidone (PVP) (in a ratio of 5:1wt [PVP:acetates]) were dissolved in a solution with 61.5 wt\% of methanol, 12 wt\% of propionic acid, and 26.5 wt\% of ammonium hydroxide, together with 6 wt\% of PVP in solution. Three different amounts of silver (10 wt\%, 20 wt\%, and 30 wt\%) were used in YBa$_2$Cu$_3$O$_{7-x}$. The TGA characterizations revealed a lowering of crystallization and partial melting temperatures by about \SI{30}{\celsius}. SEM images show that after burning out the polymer, a fabric composed of nanowires of diameters up to \SI{380}{\nano \metre} is produced. However, after the sintering process at \SI{925}{\celsius} for \SI{1}{\hour}, the nanowires shrink into a porous-like sample.
△ Less
Submitted 17 August, 2020; v1 submitted 6 April, 2020;
originally announced April 2020.
-
Composite stacks for reliable > 17 T trapped fields in bulk superconductor magnets
Authors:
Kai Yuan Huang,
Yunhua Shi,
Jan Srpčič,
Mark D Ainslie,
Devendra K Namburi,
Anthony R Dennis,
Difan Zhou,
Martin Boll,
Mykhaylo Filipenko,
Jan Jaroszynski,
Eric E Hellstrom,
David A Cardwell,
John H Durrell
Abstract:
Trapped fields of over 20 T are, in principle, achievable in bulk, single-grain high temperature cuprate superconductors. The principle barriers to realizing such performance are, firstly, the large tensile stresses that develop during the magnetization of such trapped-field magnets as a result of the Lorentz force, which lead to brittle fracture of these ceramic-like materials at high fields and,…
▽ More
Trapped fields of over 20 T are, in principle, achievable in bulk, single-grain high temperature cuprate superconductors. The principle barriers to realizing such performance are, firstly, the large tensile stresses that develop during the magnetization of such trapped-field magnets as a result of the Lorentz force, which lead to brittle fracture of these ceramic-like materials at high fields and, secondly, catastrophic thermal instabilities as a result of flux movement during magnetization. Moreover, for a batch of samples nominally fabricated identically, the statistical nature of the failure mechanism means the best performance (i.e. trapped fields of over 17 T) cannot be attained reliably. The magnetization process, particularly to higher fields, also often damages the samples such that they cannot repeatedly trap high fields following subsequent magnetization. In this study, we report the sequential trap** of magnetic fields of ~ 17 T, achieving 16.8 T at 26 K initially and 17.6 T at 22.5 K subsequently, in a stack of two Ag-doped GdBa2Cu3O7-δ bulk superconductor composites of diameter 24 mm reinforced with (1) stainless-steel laminations, and (2) shrink-fit stainless steel rings. A trapped field of 17.6 T is, in fact, comparable with the highest trapped fields reported to date for bulk superconducting magnets of any mechanical and chemical composition, and this was achieved using the first composite stack to be fabricated by this technique.
△ Less
Submitted 3 December, 2019; v1 submitted 22 August, 2019;
originally announced August 2019.
-
A portable magnetic field of > 3 T generated by the flux jump assisted, pulsed field magnetisation of bulk superconductors
Authors:
Difan Zhou,
Mark D. Ainslie,
Yunhua Shi,
Anthony R. Dennis,
Kaiyuan Huang,
John R. Hull,
David A. Cardwell,
John H. Durrell
Abstract:
A trapped magnetic field of greater than 3 T has been achieved in a single grain GdBa2Cu3O7-δ (GdBaCuO) bulk superconductor of diameter 30 mm by employing pulsed field magnetisation (PFM). The magnet system is portable and operates at temperatures between 50 K and 60 K. Flux jump behaviour was observed consistently during magnetisation when the applied pulsed field, Ba, exceeded a critical value (…
▽ More
A trapped magnetic field of greater than 3 T has been achieved in a single grain GdBa2Cu3O7-δ (GdBaCuO) bulk superconductor of diameter 30 mm by employing pulsed field magnetisation (PFM). The magnet system is portable and operates at temperatures between 50 K and 60 K. Flux jump behaviour was observed consistently during magnetisation when the applied pulsed field, Ba, exceeded a critical value (e.g. 3.78 T at 60 K). A sharp dBa/dt is essential to this phenomenon. This flux jump behaviour enables the magnetic flux to penetrate fully to the centre of the bulk superconductor, resulting in full magnetization of the sample without requiring an applied field as large as that predicted by the Bean model. We show that this flux jump behaviour can occur over a wide range of fields and temperatures, and that it can be exploited in a practical quasi-permanent magnet system.
△ Less
Submitted 1 January, 2017;
originally announced January 2017.
-
DC Characterization of a Circular, Epoxy-Impregnated High Temperature Superconducting (HTS) Coil
Authors:
Di Hu,
Mark D. Ainslie,
Jordan P. Rush,
John H. Durrell,
** Zou
Abstract:
Direct current (DC) characterization of high temperature superconducting (HTS) coils is important for HTS applications, such as electric machines, superconducting magnetic energy storage (SMES) and transformers. In this paper, DC characterization of a circular, epoxy-impregnated HTS coil made from YBCO coated conductor for use as a prototype axial flux HTS electric machine is presented. Multiple v…
▽ More
Direct current (DC) characterization of high temperature superconducting (HTS) coils is important for HTS applications, such as electric machines, superconducting magnetic energy storage (SMES) and transformers. In this paper, DC characterization of a circular, epoxy-impregnated HTS coil made from YBCO coated conductor for use as a prototype axial flux HTS electric machine is presented. Multiple voltage taps were utilized within the coil during measurement to help provide further detailed information on its DC behavior as a function of length. Based on the experimental results, there exist regions of non-uniformity along the length of superconductor in the coil, resulting in non-ideal superconducting properties of the coil. By studying the current-voltage (I-V) curves across different regions, it is found that a decreasing n-value and critical current exists in the non-uniform parts of the HTS coil.
△ Less
Submitted 24 December, 2015;
originally announced December 2015.
-
A Trapped Field of 17.6 T in Melt-Processed, Bulk Gd-Ba-Cu-O Reinforced with Shrink-Fit Steel
Authors:
John H. Durrell,
Anthony R. Dennis,
Jan Jaroszynski,
Mark D. Ainslie,
Kysen G. B. Palmer,
Yunhua Shi,
Archie M. Campbell,
John Hull,
Mike Strasik,
Eric Hellstrom,
David A. Cardwell
Abstract:
The ability of large grain, REBa$_{2}$Cu$_{3}$O$_{7-δ}$ [(RE)BCO; RE = rare earth] bulk superconductors to trap magnetic field is determined by their critical current. With high trapped fields, however, bulk samples are subject to a relatively large Lorentz force, and their performance is limited primarily by their tensile strength. Consequently, sample reinforcement is the key to performance impr…
▽ More
The ability of large grain, REBa$_{2}$Cu$_{3}$O$_{7-δ}$ [(RE)BCO; RE = rare earth] bulk superconductors to trap magnetic field is determined by their critical current. With high trapped fields, however, bulk samples are subject to a relatively large Lorentz force, and their performance is limited primarily by their tensile strength. Consequently, sample reinforcement is the key to performance improvement in these technologically important materials. In this work, we report a trapped field of 17.6 T, the largest reported to date, in a stack of two, silver-doped GdBCO superconducting bulk samples, each of diameter 25 mm, fabricated by top-seeded melt growth (TSMG) and reinforced with shrink-fit stainless steel. This sample preparation technique has the advantage of being relatively straightforward and inexpensive to implement and offers the prospect of easy access to portable, high magnetic fields without any requirement for a sustaining current source.
△ Less
Submitted 7 July, 2014; v1 submitted 3 June, 2014;
originally announced June 2014.
-
YBCO single grains seeded by 45° - 45° bridge-seeds of different lengths
Authors:
Yunhua Shi,
John H. Durrell,
Anthony R. Dennis,
David A. Cardwell
Abstract:
Single grain, (RE)BCO bulk superconductors in large or complicated geometries are required for a variety of potential applications, such as motors and generators and magnetic shielding devices. As a result, top, multi-seeded, melt growth (TMSMG) has been investigated over the past two years in an attempt to enlarge the size of (RE)BCO single grains specifically for such applications. Of these mult…
▽ More
Single grain, (RE)BCO bulk superconductors in large or complicated geometries are required for a variety of potential applications, such as motors and generators and magnetic shielding devices. As a result, top, multi-seeded, melt growth (TMSMG) has been investigated over the past two years in an attempt to enlarge the size of (RE)BCO single grains specifically for such applications. Of these multi-seeding techniques, so-called bridge seeding provides the best alignment of two seeds in a single grain growth process. Here we report, for the first time, the successful growth of YBCO using a special, 45° - 45°, arrangement of bridge-seeds. The superconducting properties, including trapped field, of the multi-seeded YBCO grains have been measured for different bridge lengths of the 45°- 45° bridge-seeds. The boundaries at the im**ing growth front and the growth features of the top, multi-seeded surface and cross-section of the multi-seeded, samples have been analysed using optical microscopy. The results suggest that an impurity-free boundary between the two seeds of each leg of the bridge-seed can form when 45°- 45° bridge-seeds are used to enlarge the size of YBCO grains.
△ Less
Submitted 19 October, 2012;
originally announced October 2012.
-
A Trapped Field of >3T in Bulk MgB2 Fabricated by Uniaxial Hot Pressing
Authors:
J. H. Durrell,
C. E. J. Dancer,
A. Dennis,
Y. Shi,
Z. Xu,
A. M. Campbell,
N. H. Babu,
R. I. Todd,
C. R. M. Grovenor,
D. A. Cardwell
Abstract:
A trapped field of over 3 T has been measured at 17.5 K in a magnetised stack of two disc-shaped bulk MgB2 superconductors of diameter 25 mm and thickness 5.4 mm. The bulk MgB2 samples were fabricated by uniaxial hot pressing, which is a readily scalable, industrial technique, to 91% of their maximum theoretical density. The macroscopic critical current density derived from the trapped field data…
▽ More
A trapped field of over 3 T has been measured at 17.5 K in a magnetised stack of two disc-shaped bulk MgB2 superconductors of diameter 25 mm and thickness 5.4 mm. The bulk MgB2 samples were fabricated by uniaxial hot pressing, which is a readily scalable, industrial technique, to 91% of their maximum theoretical density. The macroscopic critical current density derived from the trapped field data using the Biot-Savart law is consistent with the measured local critical current density. From this we conclude that critical current density, and therefore trapped field performance, is limited by the flux pinning available in MgB2, rather than by lack of connectivity. This suggests strongly that both increasing sample size and enhancing pinning through do** will allow further increases in trapped field performance of bulk MgB2.
△ Less
Submitted 28 September, 2012; v1 submitted 30 July, 2012;
originally announced July 2012.
-
The behavior of grain boundaries in the Fe-based superconductors
Authors:
J. H. Durrell,
C. -B. Eom,
A. Gurevich,
E. E. Hellstrom,
C. Tarantini,
A. Yamamoto,
D. C. Larbalestier
Abstract:
The Fe-based superconductors (FBS) are an important new class of superconducting materials. As with any new superconductor with a high transition temperature and upper critical field, there is a need to establish what their applications potential might be. Applications require high critical current densities, so the usefulness of any new superconductor is determined both by the capability to devel…
▽ More
The Fe-based superconductors (FBS) are an important new class of superconducting materials. As with any new superconductor with a high transition temperature and upper critical field, there is a need to establish what their applications potential might be. Applications require high critical current densities, so the usefulness of any new superconductor is determined both by the capability to develop strong vortex pinning and by the absence or ability to overcome any strong current-limiting mechanisms of which grain boundaries in the cuprates are a cautionary example. In this review we first consider the positive role that grain boundary properties play in the metallic, low temperature superconductors and then review the theoretical background and current experimental data relating to the properties of grain boundaries in FBS polycrystals, bi-crystal thin films, and wires. Based on this evidence, we conclude that grain boundaries in FBS are weak linked in a qualitatively similar way to grain boundaries in the cuprate superconductors, but also that the effects are a little less marked. Initial experiments with the textured substrates used for cuprate coated conductors show similar benefit for the critical current density of FBS thin films too. We also note that the particular richness of the pairing symmetry and the multiband parent state in FBS may provide opportunities for grain boundary modification as a better understanding of their pairing state and grain boundary properties are developed.
△ Less
Submitted 14 October, 2011; v1 submitted 4 October, 2011;
originally announced October 2011.
-
Theory and experiment testing flux-line-cutting physics
Authors:
John R. Clem,
Marcus Weigand,
J. H. Durrell,
A. M. Campbell
Abstract:
We discuss predictions of five proposed theories for the critical state of type-II superconductors accounting for both flux cutting and flux transport (depinning). The theories predict different behaviours for the ratio $E_y/E_z$ of the transverse and parallel components of the in-plane electric field produced just above the critical current of a type-II superconducting slab as a function of the a…
▽ More
We discuss predictions of five proposed theories for the critical state of type-II superconductors accounting for both flux cutting and flux transport (depinning). The theories predict different behaviours for the ratio $E_y/E_z$ of the transverse and parallel components of the in-plane electric field produced just above the critical current of a type-II superconducting slab as a function of the angle of an in-plane applied magnetic field. We present experimental results measured using an epitaxially grown YBCO thin film favoring one of the five theories: the extended elliptic critical-state model. We conclude that when the current density $\bm J$ is neither parallel nor perpendicular to the local magnetic flux density $\bm B$, both flux cutting and flux transport occur simultaneously when $J$ exceeds the critical current density $J_c$, indicating an intimate relationship between flux cutting and depinning. We also conclude that the dynamical properties of the superconductor when $J$ exceeds $J_c$ depend in detail upon two nonlinear effective resistivities for flux cutting ($ρ_c$) and flux flow ($ρ_f$) and their ratio $r= ρ_c/ρ_f$.
△ Less
Submitted 7 March, 2011;
originally announced March 2011.
-
Individual grain boundary properties and overall performance of metal-organic-deposition coated conductors
Authors:
M. Weigand,
S. C. Speller,
G. M. Hughes,
N. A. Rutter,
S. Lozano-Perez,
C. R. M. Grovenor,
J. H. Durrell
Abstract:
We have investigated single grain boundaries (GBs) isolated in coated conductors produced by Metal-Organic Deposition (MOD). When a magnetic field is swept in the film plane, an angle-dependent crossover from boundary to grain limited critical current density Jc is found. In the force-free orientation, even at fields as high as 8 T, the GBs still limit Jc. We deduce that this effect is a direct co…
▽ More
We have investigated single grain boundaries (GBs) isolated in coated conductors produced by Metal-Organic Deposition (MOD). When a magnetic field is swept in the film plane, an angle-dependent crossover from boundary to grain limited critical current density Jc is found. In the force-free orientation, even at fields as high as 8 T, the GBs still limit Jc. We deduce that this effect is a direct consequence of GB meandering. We have employed these single GB results to explain the dependence of Jc of polycrystalline tracks on their width: in-plane measurements become flatter as the tracks are narrowed down. This result is consistent with the stronger GB limitation at field configurations close to force-free found from the isolated boundaries. Our study shows that for certain geometries even at high fields the effect of GBs cannot be neglected.
△ Less
Submitted 13 April, 2010;
originally announced April 2010.
-
Practical vortex diodes from pinning enhanced YBa2Cu3O7-d
Authors:
S. A. Harrington,
J. L. MacManus-Driscoll,
J. H. Durrell
Abstract:
We identify a scalable, practical route to fabricating a superconducting diode. The device relies for its function on the barrier to flux vortex entry being reduced at the substrate interface of a superconducting pinning enhanced YBa2Cu3O7-d nano-composite film. We show that these composite systems provide a practical route to fabricating a useful superconducting diode and demonstrate the rectif…
▽ More
We identify a scalable, practical route to fabricating a superconducting diode. The device relies for its function on the barrier to flux vortex entry being reduced at the substrate interface of a superconducting pinning enhanced YBa2Cu3O7-d nano-composite film. We show that these composite systems provide a practical route to fabricating a useful superconducting diode and demonstrate the rectification of an alternating current.
△ Less
Submitted 29 June, 2009; v1 submitted 22 April, 2009;
originally announced April 2009.
-
Suppression of vortex channeling in meandered YBa2Cu3O7-d grain boundaries
Authors:
J. H. Durrell,
D. M. Feldmann,
C. Cantoni
Abstract:
We report on the in-plane magnetic field (H) dependence of the critical current density (Jc) in meandered and planar single grain boundaries (GBs) isolated in YBa2Cu3O7-d (YBCO) coated conductors. The Jc(H)properties of the planar GB are consistent with those previously seen in single GBs of YBCO films grown on SrTiO3 bi-crystals. In the straight boundary a characteristic flux channeling regime…
▽ More
We report on the in-plane magnetic field (H) dependence of the critical current density (Jc) in meandered and planar single grain boundaries (GBs) isolated in YBa2Cu3O7-d (YBCO) coated conductors. The Jc(H)properties of the planar GB are consistent with those previously seen in single GBs of YBCO films grown on SrTiO3 bi-crystals. In the straight boundary a characteristic flux channeling regime when H is oriented near the GB plane, associated with a reduced Jc, is seen. The meandered GB does not show vortex channeling since it is not possible for a sufficient length of vortex line to lie within it.
△ Less
Submitted 22 August, 2007;
originally announced August 2007.
-
Vortex deformation and breaking in superconductors: A microscopic description
Authors:
E. Pardo,
J. H. Durrell,
M. G. Blamire
Abstract:
Vortex breaking has been traditionally studied for nonuniform critical current densities, although it may also appear due to nonuniform pinning force distributions. In this article we study the case of a high-pinning/low-pinning/high-pinning layered structure. We have developed an elastic model for describing the deformation of a vortex in these systems in the presence of a uniform transport cur…
▽ More
Vortex breaking has been traditionally studied for nonuniform critical current densities, although it may also appear due to nonuniform pinning force distributions. In this article we study the case of a high-pinning/low-pinning/high-pinning layered structure. We have developed an elastic model for describing the deformation of a vortex in these systems in the presence of a uniform transport current density $J$ for any arbitrary orientation of the transport current and the magnetic field. If $J$ is above a certain critical value, $J_c$, the vortex breaks and a finite effective resistance appears. Our model can be applied to some experimental configurations where vortex breaking naturally exists. This is the case for YBa$_2$Cu$_3$O$_{7-x}$ (YBCO) low angle grain boundaries and films on vicinal substrates, where the breaking is experienced by Abrikosov-Josephson vortices (AJV) and Josephson string vortices (SV), respectively. With our model, we have experimentally extracted some intrinsic parameters of the AJV and SV, such as the line tension $ε_l$ and compared it to existing predictions based on the vortex structure.
△ Less
Submitted 26 September, 2007; v1 submitted 8 January, 2007;
originally announced January 2007.
-
Cross-over between channeling and pinning at twin boundaries in YBa2Cu3O7 thin films
Authors:
A. Palau,
J. H. Durrell,
J. L. MacManus-Driscoll,
S. Harrington,
T. Puig,
F. Sandiumenge,
X. Obradors,
M. G. Blamire
Abstract:
The critical current (Jc) of highly twinned YBa2Cu3O7 films has been measured as a function of temperature, magnetic field and angle. For much of the parameter space we observe a strong suppression of Jc for fields in the twin boundary (TB) directions; this is quantitatively modeled as flux-cutting-mediated vortex channeling. For certain temperatures and fields a cross-over occurs to a regime in…
▽ More
The critical current (Jc) of highly twinned YBa2Cu3O7 films has been measured as a function of temperature, magnetic field and angle. For much of the parameter space we observe a strong suppression of Jc for fields in the twin boundary (TB) directions; this is quantitatively modeled as flux-cutting-mediated vortex channeling. For certain temperatures and fields a cross-over occurs to a regime in which channeling is blocked and the TBs act as planar pinning centers so that TB pinning enhances the overall Jc. In this regime, intrinsic pinning along the TBs is comparable to that between the twins.
△ Less
Submitted 25 July, 2006;
originally announced July 2006.
-
Angle-dependence of the Hall effect in HgBa2CaCu2O6 thin films
Authors:
H. Richter,
I. Puica,
W. Lang,
M. Peruzzi,
J. H. Durrell,
H. Sturm,
J. D. Pedarnig,
D. Baeuerle
Abstract:
Superconducting compounds of the family Hg-Ba-Ca-Cu-O have been the subject of intense study since the current record-holder for the highest critical temperature of a superconductor belongs to this class of materials. Thin films of the compound with two adjacent copper-oxide layers and a critical temperature of about 120 K were prepared by a two-step process that consists of the pulsed-laser dep…
▽ More
Superconducting compounds of the family Hg-Ba-Ca-Cu-O have been the subject of intense study since the current record-holder for the highest critical temperature of a superconductor belongs to this class of materials. Thin films of the compound with two adjacent copper-oxide layers and a critical temperature of about 120 K were prepared by a two-step process that consists of the pulsed-laser deposition of precursor films and the subsequent annealing in mercury-vapor atmosphere. Like some other high-temperature superconductors, Hg-Ba-Ca-Cu-O exhibits a specific anomaly of the Hall effect, a double-sign change of the Hall coefficient close to the superconducting transition. We have investigated this phenomenon by measurements of the Hall effect at different angles between the magnetic field direction and the crystallographic c-axis. The results concerning the upper part of the transition, where the first sign change occurs, are discussed in terms of the renormalized fluctuation model for the Hall conductivity, adapted through the field rescaling procedure in order to take into account the arbitrary orientation of the magnetic field.
△ Less
Submitted 13 April, 2006;
originally announced April 2006.
-
Negative magnetocaloric effect from highly sensitive metamagnetism in CoMnSi_{1-x}Ge_{x}
Authors:
K. G. Sandeman,
R. Daou,
S. Ozcan,
J. H. Durrell,
N. D. Mathur,
D. J. Fray
Abstract:
We report a novel negative magnetocaloric effect in CoMnSi_{1-x}Ge_{x} arising from a metamagnetic magnetoelastic transition. The effect is of relevance to magnetic refrigeration over a wide range of temperature, including room temperature. In addition we report a very high shift in the metamagnetic transition temperature with applied magnetic field. This is driven by competition between antifer…
▽ More
We report a novel negative magnetocaloric effect in CoMnSi_{1-x}Ge_{x} arising from a metamagnetic magnetoelastic transition. The effect is of relevance to magnetic refrigeration over a wide range of temperature, including room temperature. In addition we report a very high shift in the metamagnetic transition temperature with applied magnetic field. This is driven by competition between antiferromagnetic and ferromagnetic order which can be readily tuned by applied pressure and compositional changes.
△ Less
Submitted 31 March, 2006;
originally announced March 2006.
-
Benefits of current percolation in superconducting coated conductors
Authors:
N. A. Rutter,
J. H. Durrell,
M. G. Blamire,
J. L. MacManus-Driscoll,
H. Wang,
S. R. Foltyn
Abstract:
The critical currents of MOD/RABiTS and PLD/IBAD coated conductors have been measured as a function of magnetic field orientation and compared to films grown on single crystal substrates. By varying the orientation of magnetic field applied in the plane of the film, we are able to determine the extent to which current flow in each type of conductor is percolative. Standard MOD/RABiTS conductors…
▽ More
The critical currents of MOD/RABiTS and PLD/IBAD coated conductors have been measured as a function of magnetic field orientation and compared to films grown on single crystal substrates. By varying the orientation of magnetic field applied in the plane of the film, we are able to determine the extent to which current flow in each type of conductor is percolative. Standard MOD/RABiTS conductors have also been compared to samples whose grain boundaries have been doped by diffusing Ca from an overlayer. We find that undoped MOD/RABiTS tapes have a less anisotropic in-plane field dependence than PLD/IBAD tapes and that the uniformity of critical current as a function of in-plane field angle is greater for MOD/RABiTS samples doped with Ca.
△ Less
Submitted 16 June, 2005;
originally announced June 2005.
-
Critical currents in vicinal YBa$_2$Cu$_3$O$_{7-δ}$ films
Authors:
J. H. Durrell,
G. Burnell,
Z. H. Barber,
M. G. Blamire,
J. E. Evetts
Abstract:
Most measurements of critical current densities in YBa$_2$Cu$_3$O$_{7-δ}$ thin films to date have been performed on films where the \textit{c}-axis is grown normal to the film surface. With such films, the analysis of the dependence of $j_c$ on the magnetic field angle is complex. The effects of extrinsic contributions to the angular field dependence of $j_c$, such as the measurement geometry an…
▽ More
Most measurements of critical current densities in YBa$_2$Cu$_3$O$_{7-δ}$ thin films to date have been performed on films where the \textit{c}-axis is grown normal to the film surface. With such films, the analysis of the dependence of $j_c$ on the magnetic field angle is complex. The effects of extrinsic contributions to the angular field dependence of $j_c$, such as the measurement geometry and disposition of pinning centres, are convoluted with those intrinsically due to the anisotropy of the material. As a consequence of this, it is difficult to distinguish between proposed FLL structure models on the basis of angular critical current density measurements on \textit{c}-axis films. Films grown on mis-cut (vicinal) substrates have a reduced measurement symmetry and thus provide a greater insight into the critical current anisotropy. In this paper previous descriptions of the magnetic field angle dependence of $j_c$ in YBa$_2$Cu$_3$O$_{7-δ}$ are reviewed. Measurements on YBa$_2$Cu$_3$O$_{7-δ}$ thin films grown on a range of vicinal substrates are presented and the results interpreted in terms of the structure and dimensionality of the FLL in YBa$_2$Cu$_3$O$_{7-δ}$. There is strong evidence for a transition in the structure of the flux line lattice depending on magnetic field magnitude, orientation and temperature. As a consequence, a simple scaling law can not, by itself, describe the observed critical current anisotropy in YBa$_2$Cu$_3$O$_{7-δ}$. The experimentally obtained $j_c(θ)$ behaviour of YBCO is successfully described in terms of a kinked vortex structure for fields applied near parallel to the \textit{a-b} planes.
△ Less
Submitted 9 July, 2004; v1 submitted 25 June, 2004;
originally announced June 2004.
-
Effect of varying material anisotropy on critical current anistropy in vicinal YBa$_2$Cu$_3$O$_{7-δ}$ thin films
Authors:
J. H. Durrell,
R. Roessler,
M. P. Delamare,
J. D. Pedarnig,
D Baeuerle,
J. E. Evetts
Abstract:
The high $T_{c}$ cuprate superconductors are noted for their anisotropic layered structure, certain of these materials indeed tend toward the limit of a Lawrence-Doniach superconductor. However, YBa$_2$Cu$_3$O$_{7-δ}$ has a smaller anisotropy than would be expected from its interlayer spacing. This is due to the cuprate chains in the structure. To investigate the influence of the chain oxygen on…
▽ More
The high $T_{c}$ cuprate superconductors are noted for their anisotropic layered structure, certain of these materials indeed tend toward the limit of a Lawrence-Doniach superconductor. However, YBa$_2$Cu$_3$O$_{7-δ}$ has a smaller anisotropy than would be expected from its interlayer spacing. This is due to the cuprate chains in the structure. To investigate the influence of the chain oxygen on transport properties critical current versus applied field angle measurements were performed on fully oxygenated and de-oxygenated YBa$_2$Cu$_3$O$_{7-δ}$ thin films and optimally oxygenated Y$_{0.75}$Ca$_{0.2}$Ba$_2$Cu$_3$O$_{7-δ}$ thin films. The films were grown on 10$^{\circ}$ mis-cut SrTiO$_3$ substrates to enable the intrinsic vortex channelling effect to be observed. The form of the vortex channelling minimum observed in field angle dependent critical current studies on the films was seen to depend on film oxygenation. The vortex channelling effect is dependent on a angular dependent cross-over to a string-pancake flux line lattice. The results obtained appear to be consistent with the prediction of Blatter et al. [Rev. Mod. Phys., 66 (4): 1125 (1994)] that increased superconducting anisotropy leads to the kinked string-pancake lattice existing over a smaller angular range.
△ Less
Submitted 13 August, 2003;
originally announced August 2003.
-
The critical current of YBa2Cu3O7-d Low Angle Grain Boundaries
Authors:
J. H. Durrell,
M. J. Hogg,
F. Kahlmann,
Z. H. Barber,
M. G. Blamire,
J. E. Evetts
Abstract:
Transport critical current measurements have been performed on 5 degree [001]-tilt thin film YBa2Cu3O7-delta single grain boundaries with magnetic field rotated in the plane of the film, phi. The variation of the critical current has been determined as a function of the angle between the magnetic field and the grain boundary plane. In applied fields above 1 T the critical current, j_c, is found…
▽ More
Transport critical current measurements have been performed on 5 degree [001]-tilt thin film YBa2Cu3O7-delta single grain boundaries with magnetic field rotated in the plane of the film, phi. The variation of the critical current has been determined as a function of the angle between the magnetic field and the grain boundary plane. In applied fields above 1 T the critical current, j_c, is found to be strongly suppressed only when the magnetic field is within an angle phi_k of the grain boundary. Outside this angular range the behavior of the artificial grain boundary is dominated by the critical current of the grains. We show that the phi dependence of j_c in the suppressed region is well described by a flux cutting model.
△ Less
Submitted 14 May, 2003; v1 submitted 21 February, 2003;
originally announced February 2003.
-
Flux line lattice structure and behaviour in anti-phase boundary free vicinal YBa2Cu3O7-d thin films
Authors:
J. H. Durrell,
S. H. Mennema,
Ch. Jooss,
G. Gibson,
Z. H. Barber,
H. W. Zandbergen,
J. E. Evetts
Abstract:
Field angle dependent critical current, magneto-optical microscopy, and high resolution electron microscopy studies have been performed on YBa2Cu3O7-d thin films grown on mis-cut substrates. High resolution electron microscopy images show that the films studied exhibited clean epitaxial growth with a low density of anti-phase boundaries and stacking faults. Any anti-phase boundaries (APBs) forme…
▽ More
Field angle dependent critical current, magneto-optical microscopy, and high resolution electron microscopy studies have been performed on YBa2Cu3O7-d thin films grown on mis-cut substrates. High resolution electron microscopy images show that the films studied exhibited clean epitaxial growth with a low density of anti-phase boundaries and stacking faults. Any anti-phase boundaries (APBs) formed near the film substrate interface rapidly healed rather than extending through the thickness of the film. Unlike vicinal films grown on annealed substrates, which contain a high density of anti-phase boundaries, magneto optical imaging showed no filamentary flux penetration in the films studied. The flux penetration is, however, asymmetric. This is associated with intrinsic pinning of flux strings by the tilted a-b planes and the dependence of the pinning force on the angle between the local field and the a-b planes. Field angle dependent critical current measurements exhibited the striking vortex channelling effect previously reported in vicinal films. By combining the results of three complementary characterisation techniques it is shown that extended APB free films exhibit markedly different critical current behaviour as compared to APB rich films. This is attributed to the role of APB sites as strong pinning centres for Josephson string vortices between the a-b planes.
△ Less
Submitted 27 January, 2003;
originally announced January 2003.
