Showing 1–50 of 97 results for author: Durian, D J

Cornerstones are the Key Stones: Using Interpretable Machine Learning to Probe the Clogging Process in 2D Granular Hoppers

Authors: Jesse M. Hanlan, Sam Dillavou, Andrea J. Liu, Douglas J. Durian

Abstract: The sudden arrest of flow by formation of a stable arch over an outlet is a unique and characteristic feature of granular materials. Previous work suggests that grains near the outlet randomly sample configurational flow microstates until a clog-causing flow microstate is reached. However, factors that lead to clogging remain elusive. Here we experimentally observe over 50,000 clogging events for… ▽ More The sudden arrest of flow by formation of a stable arch over an outlet is a unique and characteristic feature of granular materials. Previous work suggests that grains near the outlet randomly sample configurational flow microstates until a clog-causing flow microstate is reached. However, factors that lead to clogging remain elusive. Here we experimentally observe over 50,000 clogging events for a tridisperse mixture of quasi-2D circular grains, and utilize a variety of machine learning (ML) methods to search for predictive signatures of clogging microstates. This approach fares just modestly better than chance. Nevertheless, our analysis using linear Support Vector Machines (SVMs) highlights the position of potential arch cornerstones as a key factor in clogging likelihood. We verify this experimentally by varying the position of a fixed (cornerstone) grain, and show that such a grain dictates the size of feasible flow-ending arches, and thus the time and mass of each flow. Positioning this grain correctly can even increase the ejected mass by over 50%. Our findings demonstrate that interpretable ML algorithms like SVMs can uncover meaningful physics even when their predictive power is below the standards of conventional ML practice. △ Less

Submitted 7 July, 2024; originally announced July 2024.

Comments: 16 pages, 11 figures

Taut-Line Buzzers with Periodic Forcing

Authors: Jesse M. Hanlan, Douglas J. Durian

Abstract: The time-dependent forcing and work per cycle required to drive sinusoidal spinning of a taut-line buzzer is analytically derived, both on and off resonance, from the nonlinear equation of motion. To test predictions, a model experimental system is constructed and characterized in terms of contraction versus twist angle and damped oscillations. The predicted force profile is then approximately imp… ▽ More The time-dependent forcing and work per cycle required to drive sinusoidal spinning of a taut-line buzzer is analytically derived, both on and off resonance, from the nonlinear equation of motion. To test predictions, a model experimental system is constructed and characterized in terms of contraction versus twist angle and damped oscillations. The predicted force profile is then approximately implemented by hand. Nearly sinusoidal motion is observed, and the energy injection per cycle needed to maintain steady state oscillations is found to agree with theory. Additional force profiles are implemented, one to maximize non-sinusoidal response and one to maximize the response per operator effort. With the latter, an Aluminum disk of radius 5~cm and height 0.95~cm was spun at a peak speed of over 11,000~RMP for fifteen minutes. The corresponding hand-powered centrifuge system would required $1.5\times$ more force, twice the power, and triple the time in order to run $90\times$ more samples than prior state-of-art. △ Less

Submitted 29 May, 2024; v1 submitted 29 February, 2024; originally announced February 2024.

The Equation of Motion for Taut-Line Buzzers

Authors: Alexander J. Gerra, Courtney C. Jones, Sam Dillavou, Jesse M. Hanlan, Julia Radzio, Paulo E. Arratia, Douglas J. Durian

Abstract: Equations of motion are developed for the oscillatory rotation of a disk suspended between twisted strings kept under tension by a hanging mass, to which additional forces may be applied. In the absence of forcing, damped harmonic oscillations are observed to decay with an exponential time envelope for two different string types. This is consistent with dam** caused by string viscosity, rather t… ▽ More Equations of motion are developed for the oscillatory rotation of a disk suspended between twisted strings kept under tension by a hanging mass, to which additional forces may be applied. In the absence of forcing, damped harmonic oscillations are observed to decay with an exponential time envelope for two different string types. This is consistent with dam** caused by string viscosity, rather than air turbulence, and may be quantified in terms of a quality factor. To test the proposed equation of motion and model for viscous dam** within the string, we measure both the natural oscillation frequency and the quality factor for widely varied values of string length, string radius, disk moment of inertia, and hanging mass. The data are found to scale in good accord with predictions. A variation where rotational kinetic energy is converted back and forth to spring potential energy is also discussed. △ Less

Submitted 29 May, 2024; v1 submitted 29 February, 2024; originally announced February 2024.

Comments: 7 pages, 3 figures, 1 table

Stochastic dynamics of granular hopper flows: a slow hidden mode controls the stability of clogs

Authors: David Hathcock, Sam Dillavou, Jesse M. Hanlan, Douglas J. Durian, Yuhai Tu

Abstract: Granular flows in small-outlet hoppers exhibit intermittent clogging behavior: while a temporary clog (pause) can last for an extended period before flow spontaneously restarts, there are also permanent clogs that last beyond experimental timescales. Here, we introduce a phenomenological model with multiplicative noise that provides a dynamical explanation for these extreme events: they arise due… ▽ More Granular flows in small-outlet hoppers exhibit intermittent clogging behavior: while a temporary clog (pause) can last for an extended period before flow spontaneously restarts, there are also permanent clogs that last beyond experimental timescales. Here, we introduce a phenomenological model with multiplicative noise that provides a dynamical explanation for these extreme events: they arise due to coupling between the flow rate and a slow hidden mode that controls the stability of clogs. The theory fully resolves the statistics of pause and clog events, including the non-exponential clogging times and non-Gaussian flow rate distribution and explains the stretched-exponential growth of the average clogging time with outlet size. Our work provides a framework for extracting features of granular flow dynamics from experimental trajectories. △ Less

Submitted 2 December, 2023; originally announced December 2023.

Comments: 5 pages, 3 figures; SM: 6 pages

Machine Learning Without a Processor: Emergent Learning in a Nonlinear Electronic Metamaterial

Authors: Sam Dillavou, Benjamin D Beyer, Menachem Stern, Andrea J Liu, Marc Z Miskin, Douglas J Durian

Abstract: Standard deep learning algorithms require differentiating large nonlinear networks, a process that is slow and power-hungry. Electronic learning metamaterials offer potentially fast, efficient, and fault-tolerant hardware for analog machine learning, but existing implementations are linear, severely limiting their capabilities. These systems differ significantly from artificial neural networks as… ▽ More Standard deep learning algorithms require differentiating large nonlinear networks, a process that is slow and power-hungry. Electronic learning metamaterials offer potentially fast, efficient, and fault-tolerant hardware for analog machine learning, but existing implementations are linear, severely limiting their capabilities. These systems differ significantly from artificial neural networks as well as the brain, so the feasibility and utility of incorporating nonlinear elements have not been explored. Here we introduce a nonlinear learning metamaterial -- an analog electronic network made of self-adjusting nonlinear resistive elements based on transistors. We demonstrate that the system learns tasks unachievable in linear systems, including XOR and nonlinear regression, without a computer. We find our nonlinear learning metamaterial reduces modes of training error in order (mean, slope, curvature), similar to spectral bias in artificial neural networks. The circuitry is robust to damage, retrainable in seconds, and performs learned tasks in microseconds while dissipating only picojoules of energy across each transistor. This suggests enormous potential for fast, low-power computing in edge systems like sensors, robotic controllers, and medical devices, as well as manufacturability at scale for performing and studying emergent learning. △ Less

Submitted 5 April, 2024; v1 submitted 1 November, 2023; originally announced November 2023.

Comments: 11 pages 8 figures

Experimental Demonstration of Coupled Learning in Elastic Networks

Authors: Lauren E. Altman, Menachem Stern, Andrea J. Liu, Douglas J. Durian

Abstract: Coupled learning is a contrastive scheme for tuning the properties of individual elements within a network in order to achieve desired functionality of the system. It takes advantage of physics both to learn using local rules and to "compute" the output response to input data, thus enabling the system to perform decentralized computation without the need for a processor or external memory. We demo… ▽ More Coupled learning is a contrastive scheme for tuning the properties of individual elements within a network in order to achieve desired functionality of the system. It takes advantage of physics both to learn using local rules and to "compute" the output response to input data, thus enabling the system to perform decentralized computation without the need for a processor or external memory. We demonstrate a proof-of-concept mechanical network that can learn simple tasks such as self-symmetrizing via iterative tuning of individual spring rest lengths. These mechanical networks could feasibly be scaled and automated to solve increasingly complex tasks, hinting at a new class of smart metamaterials. △ Less

Submitted 8 July, 2024; v1 submitted 31 October, 2023; originally announced November 2023.

Comments: 14 pages, 7 figures

Physical learning of power-efficient solutions

Authors: Menachem Stern, Sam Dillavou, Dinesh Jayaraman, Douglas J. Durian, Andrea J. Liu

Abstract: As the size and ubiquity of artificial intelligence and computational machine learning (ML) models grow, their energy consumption for training and use is rapidly becoming economically and environmentally unsustainable. Neuromorphic computing, or the implementation of ML in hardware, has the potential to reduce this cost. In particular, recent laboratory prototypes of self-learning electronic circu… ▽ More As the size and ubiquity of artificial intelligence and computational machine learning (ML) models grow, their energy consumption for training and use is rapidly becoming economically and environmentally unsustainable. Neuromorphic computing, or the implementation of ML in hardware, has the potential to reduce this cost. In particular, recent laboratory prototypes of self-learning electronic circuits, examples of ``physical learning machines," open the door to analog hardware that directly employs physics to learn desired functions from examples. In this work, we show that this hardware platform allows for even further reduction of energy consumption by using good initial conditions as well as a new learning algorithm. Using analytical calculations, simulation and experiment, we show that a trade-off emerges when learning dynamics attempt to minimize both the error and the power consumption of the solution--greater power reductions can be achieved at the cost of decreasing solution accuracy. Finally, we demonstrate a practical procedure to weigh the relative importance of error and power minimization, improving power efficiency given a specific tolerance to error. △ Less

Submitted 16 October, 2023; originally announced October 2023.

Comments: 15 pages, 7 figures

Bellybutton: Accessible and Customizable Deep-Learning Image Segmentation

Authors: Sam Dillavou, Jesse M. Hanlan, Anthony T. Chieco, Hongyi Xiao, Sage Fulco, Kevin T. Turner, Douglas J. Durian

Abstract: The conversion of raw images into quantifiable data can be a major hurdle in experimental research, and typically involves identifying region(s) of interest, a process known as segmentation. Machine learning tools for image segmentation are often specific to a set of tasks, such as tracking cells, or require substantial compute or coding knowledge to train and use. Here we introduce an easy-to-use… ▽ More The conversion of raw images into quantifiable data can be a major hurdle in experimental research, and typically involves identifying region(s) of interest, a process known as segmentation. Machine learning tools for image segmentation are often specific to a set of tasks, such as tracking cells, or require substantial compute or coding knowledge to train and use. Here we introduce an easy-to-use (no coding required), image segmentation method, using a 15-layer convolutional neural network that can be trained on a laptop: Bellybutton. The algorithm trains on user-provided segmentation of example images, but, as we show, just one or even a portion of one training image can be sufficient in some cases. We detail the machine learning method and give three use cases where Bellybutton correctly segments images despite substantial lighting, shape, size, focus, and/or structure variation across the regions(s) of interest. Instructions for easy download and use, with further details and the datasets used in this paper are available at pypi.org/project/Bellybuttonseg. △ Less

Submitted 31 August, 2023; originally announced September 2023.

Comments: 6 Pages 3 Figures

Hierarchical bubble size distributions in coarsening wet liquid foams

Authors: Nicolo Galvani, Marina Pasquet, Arnab Mukherjee, Alice Requier, Sylvie Cohen-Addad, Olivier Pitois, Reinhard Höhler, Emmanuelle Rio, Anniina Salonen, Douglas J. Durian, Dominique Langevin

Abstract: Coarsening of two-phase systems is crucial for the stability of dense particle packings such as alloys, foams, emulsions or supersaturated solutions. Mean field theories predict an asymptotic scaling state with a broad particle size distribution. Aqueous foams are good model systems for investigations of coarsening-induced structures, because the continuous liquid as well as the dispersed gas phas… ▽ More Coarsening of two-phase systems is crucial for the stability of dense particle packings such as alloys, foams, emulsions or supersaturated solutions. Mean field theories predict an asymptotic scaling state with a broad particle size distribution. Aqueous foams are good model systems for investigations of coarsening-induced structures, because the continuous liquid as well as the dispersed gas phases are uniform and isotropic. We present coarsening experiments on wet foams, with liquid fractions up to their unjamming point and beyond, that are performed under microgravity to avoid gravitational drainage. As time elapses, a self-similar regime is reached where the normalized bubble size distribution is invariant. Unexpectedly, the distribution features an excess of small \textit{roaming} bubbles, mobile within the network of \textit{jammed} larger bubbles. These roaming bubbles are reminiscent of rattlers in granular materials (grains not subjected to contact forces). We identify a critical liquid fraction $φ^*$, above which the bubble assembly unjams and the two bubble populations merge into a single narrow distribution of bubbly liquids. Unexpectedly, $φ^*$ is larger than the random close packing fraction of the foam $φ_{rcp}$. This is because, between $φ_{rcp}$ and $φ^*$, the large bubbles remain connected due to a weak adhesion between bubbles. We present models that identify the physical mechanisms explaining our observations. We propose a new comprehensive view of the coarsening phenomenon in wet foams. Our results should be applicable to other phase-separating systems and they may also help to control the elaboration of solid foams with hierarchical structures. △ Less

Submitted 31 July, 2023; v1 submitted 23 April, 2023; originally announced April 2023.

Effective exponents for the diffusive coarsening of wet foams and analogous materials

Authors: Douglas J. Durian

Abstract: Empirical exponents for the growth of average domain size commonly lie between the known limits of 1/2 and 1/3. Here, a framework is developed in the context of foams to quantitatively explain such intermediate exponents, based on a model of gas diffusion and microstructure in which bubbles are approximately spherical and meet at approximately circular films. This predicts growth that is only loga… ▽ More Empirical exponents for the growth of average domain size commonly lie between the known limits of 1/2 and 1/3. Here, a framework is developed in the context of foams to quantitatively explain such intermediate exponents, based on a model of gas diffusion and microstructure in which bubbles are approximately spherical and meet at approximately circular films. This predicts growth that is only logarithmically different from a 1/3 power law for nearly-kissing spheres at jamming. It also predicts how the growth law and effective exponents vary with liquid content, as set by the film radius. These predictions compare well with experimental data for two different foaming systems. △ Less

Submitted 29 June, 2023; v1 submitted 1 April, 2023; originally announced April 2023.

Machine learning-informed structuro-elastoplasticity predicts ductility of disordered solids

Authors: Hongyi Xiao, Ge Zhang, Entao Yang, Robert J. S. Ivancic, Sean A. Ridout, Robert Riggleman, Douglas J. Durian, Andrea J. Liu

Abstract: All solids yield under sufficiently high mechanical loads. Below yield, the mechanical responses of all disordered solids are nearly alike, but above yield every different disordered solid responds in its own way. Brittle systems can shatter without warning, like ordinary window glass, or exhibit strain localization prior to fracture, like metallic or polymeric glasses. Ductile systems, e.g. foams… ▽ More All solids yield under sufficiently high mechanical loads. Below yield, the mechanical responses of all disordered solids are nearly alike, but above yield every different disordered solid responds in its own way. Brittle systems can shatter without warning, like ordinary window glass, or exhibit strain localization prior to fracture, like metallic or polymeric glasses. Ductile systems, e.g. foams like shaving cream or emulsions like mayonnaise, can flow indefinitely with no strain localization. While there are empirical strategies for tuning the degree of strain localization, there is no framework that explains their effectiveness or limitations. We show that Structuro-Elastoplastic (StEP) models provide microscopic understanding of how strain localization depends on the interplay of structure, plasticity and elasticity. △ Less

Submitted 22 March, 2023; originally announced March 2023.

A simply solvable model capturing the approach to statistical self-similarity for the diffusive coarsening of bubbles, droplets, and grains

Authors: Anthony T. Chieco, Douglas J. Durian

Abstract: Aqueous foams and a wide range of related systems are believed to coarsen by gas diffusion between neighboring domains into a statistically self-similar scaling state, after the decay of initial transients, such that dimensionless size and shape distributions become time independent and the average grows as a power law. Partial integrodifferential equations for the time evolution of the size distr… ▽ More Aqueous foams and a wide range of related systems are believed to coarsen by gas diffusion between neighboring domains into a statistically self-similar scaling state, after the decay of initial transients, such that dimensionless size and shape distributions become time independent and the average grows as a power law. Partial integrodifferential equations for the time evolution of the size distribution for such phase separating systems can be formulated for arbitrary initial conditions, but these are cumbersome for analyzing data on non-scaling state preparations. Here we show that essential features of the approach to the scaling state can be captured by an exactly-solvable ordinary differential equation for the evolution of the average bubble size. The key ingredient is to characterize the the bubble size distribution approximately, using the average size of all bubbles and the average size of the critical bubbles, which instantaneously neither grow nor shrink. The difference between these two averages serves as a proxy for the width of the size distribution. To test our model, we compare with data for quasi-two dimensional dry foams created with three different initial amounts of polydispersity. This allows us to readily identify the critical radius from the average area of six-sided bubbles, whose growth rate is zero by the von~Neumann law. The growth of the average and critical radii agree quite well with exact solution, though the most monodisperse sample crosses over to the scaling state faster than expected. A simpler approximate solution of our model performs equally well. Our approach is applicable to 3d foams, which we demonstrate by re-analyzing prior data, as well as to froths of dilute droplets and to phase separation kinetics for more general systems such as emulsions, binary mixtures, and alloys. △ Less

Submitted 22 June, 2023; v1 submitted 16 March, 2023; originally announced March 2023.

Journal ref: Phys. Rev. E 108, 034606 (2023)

Twist and Measure: Characterizing the Effective Radius of Strings and Bundles under Twisting Contraction

Authors: Jesse M. Hanlan, Gabrielle E. Davis, Douglas J. Durian

Abstract: We test the standard model for the length contraction of a bundle of strings under twist, and find deviation that is significantly greater than typically appreciated and that has a different nature at medium and large twist angles. By including volume conservation, we achieve better fits to data for single-, double-, and triple-stranded bundles of Nylon monofilament as an ideal test case. This giv… ▽ More We test the standard model for the length contraction of a bundle of strings under twist, and find deviation that is significantly greater than typically appreciated and that has a different nature at medium and large twist angles. By including volume conservation, we achieve better fits to data for single-, double-, and triple-stranded bundles of Nylon monofilament as an ideal test case. This gives a well-defined procedure for extracting an effective twist radius that characterizes contraction behavior. While our approach accounts for the observed faster-than-expected contraction up to medium twist angles, we also find that the contraction is nevertheless slower than expected at large twist angles for both Nylon monofilament bundles and several other string types. The size of this effect varies with the individual-string braid structure and with the number of strings in the bundle. We speculate that it may be related to elastic deformation within the material. However, our first modeling attempt does not fully capture the observed behavior. △ Less

Submitted 7 April, 2023; v1 submitted 17 January, 2023; originally announced January 2023.

Comments: 8 pages, 8 figures

Journal ref: Soft Matter 19, 4315-22 (2023)

Average outpouring velocity and flow rate of grains discharged from a tilted quasi-2D silo

Authors: Ryan Kozlowski, J. Carter Luketich, Elijah Oshatz, Douglas J. Durian, Luis A. Pugnaloni

Abstract: The flow of granular materials through constricted openings is important in many natural and industrial processes. These complex flows - featuring dense, dissipative flow in the bulk but low-dissipation, low density outpouring in the vicinity of the orifice - have long been characterized empirically by the Beverloo rule and, recently, modeled successfully using energy balance. The dependence of fl… ▽ More The flow of granular materials through constricted openings is important in many natural and industrial processes. These complex flows - featuring dense, dissipative flow in the bulk but low-dissipation, low density outpouring in the vicinity of the orifice - have long been characterized empirically by the Beverloo rule and, recently, modeled successfully using energy balance. The dependence of flow rate on the silo's angle with respect to gravity, however, is not captured by current models. We experimentally investigate the role of tilt angle in this work using a quasi-2D monolayer of grains in a silo. We measure mass flow rate, the average exit velocities of grains, and the packing fraction along the orifice with varying tilt angles. We propose a model that describes our results (and earlier findings with 3D systems [H. G. Sheldon and D. J. Durian, Granul. Matter 12, 579 (2010)]) by considering the dependence of outpouring speed and angle with respect to the orifice angle and, importantly, the angle of stagnant zones adjacent to the orifice. We conclude by posing questions about possible extensions of our model in order to describe spatial variations of exit velocity and density along the orifice cross section. △ Less

Submitted 20 January, 2023; v1 submitted 11 October, 2022; originally announced October 2022.

Comments: 10 pages and 11 figures

Aqueous foams in microgravity, measuring bubble sizes

Authors: Marina Pasquet, Nicolo Galvani, Olivier Pitois, Sylvie Cohen-Addad, Reinhard Höhler, Anthony T. Chieco, Sam Dillavou, Jesse M. Hanlan, Douglas J. Durian, Emmanuelle Rio, Anniina Salonen, Dominique Langevin

Abstract: The paper describes a study of wet foams in microgravity whose bubble size distribution evolves due to diffusive gas exchange. We focus on the comparison between the size of bubbles determined from images of the foam surface and the size of bubbles in the bulk foam, determined from Diffuse Transmission Spectroscopy (DTS). Extracting the bubble size distribution from images of a foam surface is dif… ▽ More The paper describes a study of wet foams in microgravity whose bubble size distribution evolves due to diffusive gas exchange. We focus on the comparison between the size of bubbles determined from images of the foam surface and the size of bubbles in the bulk foam, determined from Diffuse Transmission Spectroscopy (DTS). Extracting the bubble size distribution from images of a foam surface is difficult so we have used three different procedures : manual analysis, automatic analysis with a customized Python script and machine learning analysis. Once various pitfalls were identified and taken into account, all the three procedures yield identical results within error bars. DTS only allows the determination of an average bubble radius which is proportional to the photon transport mean free path $\ell^*$. The relation between the measured diffuse transmitted light intensity and {$\ell^*$} previously derived for slab-shaped samples of infinite lateral extent does not apply to the cuboid geometry of the cells used in the microgravity experiment. A new more general expression of the diffuse intensity transmitted with specific optical boundary conditions has been derived and applied to determine the average bubble radius. The temporal evolution of the average bubble radii deduced from DTS and of the same average radii of the bubbles measured at the sample surface are in very good agreement throughout the coarsening. Finally, ground experiments were performed to compare bubble size distributions in a bulk wet foam and at its surface at times so short that diffusive gas exchange is insignificant. They were found to be similar, confirming that bubbles seen at the surface are representative of the bulk foam bubbles. △ Less

Submitted 20 February, 2023; v1 submitted 7 September, 2022; originally announced September 2022.

Average Evolution and Size-Topology Relations for Coarsening 2d Dry Foams

Authors: Anthony T. Chieco, James P. Sethna, Douglas J. Durian

Abstract: Two-dimensional dry foams coarsen according to the von Neumann law as $dA/dt \propto (n-6)$ where $n$ is the number of sides of a bubble with area $A$. Such foams reach a self-similar scaling state where area and side-number distributions are stationary. Combining self-similarity with the von Neumann law, we derive time derivatives of moments of the bubble area distribution and a relation connecti… ▽ More Two-dimensional dry foams coarsen according to the von Neumann law as $dA/dt \propto (n-6)$ where $n$ is the number of sides of a bubble with area $A$. Such foams reach a self-similar scaling state where area and side-number distributions are stationary. Combining self-similarity with the von Neumann law, we derive time derivatives of moments of the bubble area distribution and a relation connecting area moments with averages of the side-number distribution that are weighted by powers of bubble area. To test these predictions, we collect and analyze high precision image data for a large number of bubbles squashed between parallel acrylic plates and allowed to coarsen into the self-similar scaling state. We find good agreement for moments ranging from two to twenty. △ Less

Submitted 5 July, 2022; v1 submitted 23 May, 2022; originally announced May 2022.

Comments: 8 pages, 7 figures

Journal ref: Frontiers in Soft Matter - Foams 2, 941811 (2022)

Structuro-elasto-plasticity (StEP) model for plasticity in disordered solids

Authors: Ge Zhang, Hongyi Xiao, Entao Yang, Robert J. S. Ivancic, Sean A. Ridout, Robert A. Riggleman, Douglas J. Durian, Andrea J. Liu

Abstract: Elastoplastic lattice models for the response of solids to deformation typically incorporate structure only implicitly via a local yield strain that is assigned to each site. However, the local yield strain can change in response to a nearby or even distant plastic event in the system. This interplay is key to understanding phenomena such as avalanches in which one plastic event can trigger anothe… ▽ More Elastoplastic lattice models for the response of solids to deformation typically incorporate structure only implicitly via a local yield strain that is assigned to each site. However, the local yield strain can change in response to a nearby or even distant plastic event in the system. This interplay is key to understanding phenomena such as avalanches in which one plastic event can trigger another, leading to a cascade of events, but typically is neglected in elastoplastic models. To include the interplay one could calculate the local yield strain for a given particulate system and follow its evolution, but this is expensive and requires knowledge of particle interactions, which is often hard to extract from experiments. Instead, we introduce a structural quantity, "softness," obtained using machine learning to correlate with imminent plastic rearrangements. We show that softness also correlates with local yield strain. We incorporate softness to construct a "structuro-elasto-plasticity" model that reproduces particle simulation results quantitatively for several observable quantities, confirming that we capture the influence of the interplay of local structure, plasticity, and elasticity on material response. △ Less

Submitted 17 May, 2022; originally announced May 2022.

Desynchronous Learning in a Physics-Driven Learning Network

Authors: Jacob F Wycoff, Sam Dillavou, Menachem Stern, Andrea J Liu, Douglas J Durian

Abstract: In a neuron network, synapses update individually using local information, allowing for entirely decentralized learning. In contrast, elements in an artificial neural network (ANN) are typically updated simultaneously using a central processor. Here we investigate the feasibility and effect of desynchronous learning in a recently introduced decentralized, physics-driven learning network. We show t… ▽ More In a neuron network, synapses update individually using local information, allowing for entirely decentralized learning. In contrast, elements in an artificial neural network (ANN) are typically updated simultaneously using a central processor. Here we investigate the feasibility and effect of desynchronous learning in a recently introduced decentralized, physics-driven learning network. We show that desynchronizing the learning process does not degrade performance for a variety of tasks in an idealized simulation. In experiment, desynchronization actually improves performance by allowing the system to better explore the discretized state space of solutions. We draw an analogy between desynchronization and mini-batching in stochastic gradient descent, and show that they have similar effects on the learning process. Desynchronizing the learning process establishes physics-driven learning networks as truly fully distributed learning machines, promoting better performance and scalability in deployment. △ Less

Submitted 1 December, 2022; v1 submitted 10 January, 2022; originally announced January 2022.

Comments: 6 pages 4 figures

Physical learning beyond the quasistatic limit

Authors: Menachem Stern, Sam Dillavou, Marc Z. Miskin, Douglas J. Durian, Andrea J. Liu

Abstract: Physical networks, such as biological neural networks, can learn desired functions without a central processor, using local learning rules in space and time to learn in a fully distributed manner. Learning approaches such as equilibrium propagation, directed aging, and coupled learning similarly exploit local rules to accomplish learning in physical networks such as mechanical, flow, or electrical… ▽ More Physical networks, such as biological neural networks, can learn desired functions without a central processor, using local learning rules in space and time to learn in a fully distributed manner. Learning approaches such as equilibrium propagation, directed aging, and coupled learning similarly exploit local rules to accomplish learning in physical networks such as mechanical, flow, or electrical networks. In contrast to certain natural neural networks, however, such approaches have so far been restricted to the quasistatic limit, where they learn on time scales slow compared to their physical relaxation. This quasistatic constraint slows down learning, limiting the use of these methods as machine learning algorithms, and potentially restricting physical networks that could be used as learning platforms. Here we explore learning in an electrical resistor network that implements coupled learning, both in the lab and on the computer, at rates that range from slow to far above the quasistatic limit. We find that up to a critical threshold in the ratio of the learning rate to the physical rate of relaxation, learning speeds up without much change of behavior or error. Beyond the critical threshold, the error exhibits oscillatory dynamics but the networks still learn successfully. △ Less

Submitted 21 December, 2021; originally announced December 2021.

Comments: 26 pages, 5 figures

Probing the Gardner transition in an active quasi-thermal pressure-controlled granular system

Authors: Hongyi Xiao, Andrea J. Liu, Douglas J. Durian

Abstract: To experimentally search for signals of the Gardner transition, an active quasi-thermal granular glass is constructed using a monolayer of air-fluidized star-shaped granular particles. The pressure of the system is controlled by adjusting the tension exerted on an enclosing boundary. Velocity distributions of the internal particles and the scaling of the pressure, density, effective-temperature, a… ▽ More To experimentally search for signals of the Gardner transition, an active quasi-thermal granular glass is constructed using a monolayer of air-fluidized star-shaped granular particles. The pressure of the system is controlled by adjusting the tension exerted on an enclosing boundary. Velocity distributions of the internal particles and the scaling of the pressure, density, effective-temperature, and relaxation time are examined, demonstrating that the system has important features of a thermal system. Using a pressure-based quenching protocol that brings the system into deeper glassy states, signals of the Gardner transition are detected via cage size and separation order parameters for both particle positions and orientations, offering experimental evidence of the Gardner transition for a system with in low spatial dimensions that is quasi-thermal. △ Less

Submitted 6 November, 2021; originally announced November 2021.

Comments: 5 pages, 4 figures

Spatters and Spills: Spreading Dynamics for Partially Wetting Droplets

Authors: Sylvia C. L. Durian, Sam Dillavou, Kwame Markin, Adrian Portales, Bryan O. Torres Maldonado, William T. M. Irvine, Paulo E. Arratia, Douglas J. Durian

Abstract: We present a solvable model inspired by dimensional analysis for the time-dependent spreading of droplets that partially wet a substrate, where the spreading eventually stops and the contact angle reaches a nonzero equilibrium value. We separately consider small droplets driven by capillarity and large droplets driven by gravity. To explore both regimes, we first measure the equilibrium radius ver… ▽ More We present a solvable model inspired by dimensional analysis for the time-dependent spreading of droplets that partially wet a substrate, where the spreading eventually stops and the contact angle reaches a nonzero equilibrium value. We separately consider small droplets driven by capillarity and large droplets driven by gravity. To explore both regimes, we first measure the equilibrium radius versus a comprehensive range of droplet volumes for four household fluids, and we compare the results with predictions based on minimizing the sum of gravitational and interfacial energies. The agreement is good, and gives a reliable measurement of an equilibrium contact angle that is consistent in both small and large droplet regimes. Next we use energy considerations to develop equations of motion for the time dependence of the spreading, in both regimes, where the driving forces are balanced against viscous drag in the bulk of the droplet and by friction at the moving contact line. Our approach leads to explicit prediction of the functional form of the spreading dynamics. It successfully describes prior data for a small capillary-driven droplet, and it fits well to new data we obtain for large gravity-driven droplets with a wide range of volumes. △ Less

Submitted 18 December, 2021; v1 submitted 3 November, 2021; originally announced November 2021.

Journal ref: Physics of Fluids 34, 012112 (2022)

Demonstration of Decentralized, Physics-Driven Learning

Authors: Sam Dillavou, Menachem Stern, Andrea J. Liu, Douglas J. Durian

Abstract: In typical artificial neural networks, neurons adjust according to global calculations of a central processor, but in the brain neurons and synapses self-adjust based on local information. Contrastive learning algorithms have recently been proposed to train physical systems, such as fluidic, mechanical, or electrical networks, to perform machine learning tasks from local evolution rules. However,… ▽ More In typical artificial neural networks, neurons adjust according to global calculations of a central processor, but in the brain neurons and synapses self-adjust based on local information. Contrastive learning algorithms have recently been proposed to train physical systems, such as fluidic, mechanical, or electrical networks, to perform machine learning tasks from local evolution rules. However, to date such systems have only been implemented in silico due to the engineering challenge of creating elements that autonomously evolve based on their own response to two sets of global boundary conditions. Here we introduce and implement a physics-driven contrastive learning scheme for a network of variable resistors, using circuitry to locally compare the response of two identical networks subjected to the two different sets of boundary conditions. Using this innovation, our system effectively trains itself, optimizing its resistance values without use of a central processor or external information storage. Once the system is trained for a specified allostery, regression, or classification task, the task is subsequently performed rapidly and automatically by the physical imperative to minimize power dissipation in response to the given voltage inputs. We demonstrate that, unlike typical computers, such learning systems are robust to extreme damage (and thus manufacturing defects) due to their decentralized learning. Our twin-network approach is therefore readily scalable to extremely large or nonlinear networks where its distributed nature will be an enormous advantage; a laboratory network of only 500 edges will already outpace its in silico counterpart. △ Less

Submitted 22 June, 2022; v1 submitted 31 July, 2021; originally announced August 2021.

Comments: 11 pages 7 figures

Quantifying the Long-Range Structure of Foams and Other Cellular Patterns with Hyperuniformity Disorder Length Spectroscopy

Authors: Anthony T. Chieco, Douglas J. Durian

Abstract: We investigate the local- and long-range structure of four different space-filling cellular patterns: bubbles in a quasi-2d foam plus Voronoi constructions made around points that are uncorrelated (Poisson patterns), low discrepancy (Halton patterns), and displaced from a lattice by Gaussian noise (Einstein patterns). We study distributions of local quantities including cell areas and topological… ▽ More We investigate the local- and long-range structure of four different space-filling cellular patterns: bubbles in a quasi-2d foam plus Voronoi constructions made around points that are uncorrelated (Poisson patterns), low discrepancy (Halton patterns), and displaced from a lattice by Gaussian noise (Einstein patterns). We study distributions of local quantities including cell areas and topological features; the former is the widest for bubbles in a foam making them locally the most disordered but the latter show no significant differences between the cellular patterns. Long-range structure is probed by the spectral density and also by converting the real-space spectrum of number density or volume fraction fluctuations for windows of diameter $D$ to the effective distance $h(D)$ from the window boundary where these fluctuations occur. This real-space hyperuniformity disorder length spectroscopy is performed on various point patterns which are determined by the centroids of the bubbles in the foam, by the points patterns around which the Voronoi cells are created and by the centroids of the Voronoi cells. These patterns are either unweighted or weighted by the area of the cells they occupy. The unweighted bubble centroids have $h(D)$ that collapses for the different ages of of the foam with random Poissonian fluctuations at long distances. All patterns of area-weighted points have constant $h(D)=h_e$ for large $D$; $h_e=0.084 \sqrt{\left< a\right>}$ for the bubble centroids is the smallest value, meaning they are most uniform. All the weighted centroids collapse to the same constant $h_e=0.084 \sqrt{\left< a\right>}$ as for the foams. A similar analysis is performed on the edges of the cells where the spectra of $h(D)$ for the foam edges show $h(D) \sim D^{1-ε}$ where $ε=0.3$ △ Less

Submitted 15 January, 2021; originally announced January 2021.

Comments: The paper is 14 pages, 10 figures

Journal ref: Phys. Rev. E 103, 062609 (2021)

Experimentally Testing a Generalized Coarsening Model for Individual Bubbles in Quasi-Two-Dimensional Wet Foams

Authors: Anthony T. Chieco, Douglas J. Durian

Abstract: We present high-precision data for the time evolution of bubble area $A(t)$ and circularity shape parameter $C(t)$ for quasi-2d foams consisting of bubbles squashed between parallel plates. In order to fully compare with predictions by Roth et al. [Phys. Rev. E 87 2013] and Schimming et al. [Phys. Rev. E 96 2017], foam wetness is systematically varied by controlling the height of the sample above… ▽ More We present high-precision data for the time evolution of bubble area $A(t)$ and circularity shape parameter $C(t)$ for quasi-2d foams consisting of bubbles squashed between parallel plates. In order to fully compare with predictions by Roth et al. [Phys. Rev. E 87 2013] and Schimming et al. [Phys. Rev. E 96 2017], foam wetness is systematically varied by controlling the height of the sample above a liquid reservoir which in turn controls the radius $r$ of the inflation of the Plateau borders. For very dry foams, where the borders are very small, classic von Neumann behavior is observed where a bubble's growth rate depends only on its number $n$ of sides. For wet foams, the inflated borders impede gas exchange and cause deviations from von Neumann's law that are found to be in accord with the generalized coarsening equation. In particular, the overall growth rate varies linearly with the film height, which decrease as surface Plateau borders inflate. And, more interestingly, the deviation from $dA/dt\propto (n-6)$ von Neumann behavior grows in proportion to $nCr/\sqrt{A}$. This is highlighted definitively by data for six-sided bubbles, which are forbidden to grow or shrink except for the existence of this term. And it is tested quantitatively by variation of all four relevant quantities: $n$, $C$, $r$, and $A$ △ Less

Submitted 13 October, 2020; originally announced October 2020.

Comments: Main paper is 9 pages with 7 figures; also contains supplemental material with an additional 9 pages and 9 figures

Journal ref: Phys. Rev. E 103, 012610 (2021)

Resolving Tensions Surrounding Massive Pulleys

Authors: D. J. Durian, J. Kroll, E. J. Mele

Abstract: The distribution of string tension on the contact line between an ideal string and a massive pulley is a frequently-discussed but incompletely-posed problem that confronts students in introductory mechanics. We highlight ambiguities in the usual presentation of this problem by the massive Atwood's machine and discuss two compact resolutions that treat situations where the pulley or the string elas… ▽ More The distribution of string tension on the contact line between an ideal string and a massive pulley is a frequently-discussed but incompletely-posed problem that confronts students in introductory mechanics. We highlight ambiguities in the usual presentation of this problem by the massive Atwood's machine and discuss two compact resolutions that treat situations where the pulley or the string elastically deform. We propose experiments that can be developed in an intermediate laboratory to determine the tension profile. △ Less

Submitted 11 October, 2020; originally announced October 2020.

Comments: American Journal of Physics (in press): pdfLaTeX: 8 pages, 6 figures

Journal ref: American Journal of Physics 89, 277 (2021)

Strain localization and failure of disordered particle rafts with tunable ductility during tensile deformation

Authors: Hongyi Xiao, Robert JS Ivancic, Douglas J Durian

Abstract: Quasi-static tensile experiments were performed for a model disordered solid consisting of a two-dimensional raft of polydisperse floating granular particles with capillary attractions. The ductility is tuned by controlling the capillary interaction range, which varies with the particle size. During the tensile tests, after an initial period of elastic deformation, strain localization occurs and l… ▽ More Quasi-static tensile experiments were performed for a model disordered solid consisting of a two-dimensional raft of polydisperse floating granular particles with capillary attractions. The ductility is tuned by controlling the capillary interaction range, which varies with the particle size. During the tensile tests, after an initial period of elastic deformation, strain localization occurs and leads to the formation of a shear band at which the pillar later fails. In this process, small particles with long-ranged interactions can endure large plastic deformations without forming significant voids, while large particles with short-range interactions fail dramatically by fracturing at small deformation. Particle-level structure was measured, and the strain-localized region was found to have higher structural anisotropy than the bulk. Local interactions between anisotropic sites and particle rearrangements were the main mechanisms driving strain localization and the subsequent failure, and significant differences of such interactions exist between ductile and brittle behaviors. △ Less

Submitted 8 May, 2020; originally announced May 2020.

Stagnant Zone Formation in a 2D Bed of Circular and Elongated Grains under Penetration

Authors: Matt Harrington, Hongyi Xiao, Douglas J. Durian

Abstract: When a large blunt object penetrates into a granular material, the force response exhibits an initial nonlinear relationship with depth that is widely attributed to the formation of a shear jammed stagnant zone. We present an experimental study of a model 2D granular system that preserves common aspects of slow granular penetration, such as a linear force law for large depths, while also allowing… ▽ More When a large blunt object penetrates into a granular material, the force response exhibits an initial nonlinear relationship with depth that is widely attributed to the formation of a shear jammed stagnant zone. We present an experimental study of a model 2D granular system that preserves common aspects of slow granular penetration, such as a linear force law for large depths, while also allowing for direct and precise measurement of a stagnant zone. We also probe structural anisotropies throughout the bed and examine their characteristics inside and outside the stagnant zone. Finally, we simultaneously consider effects of concave elongated particle shapes (dimers) and find that while most results are not affected, the relationship between local structure and strain suggests a distinct fragility in the stagnant zone. △ Less

Submitted 19 December, 2018; originally announced December 2018.

Journal ref: Granular Matter 22 (1), 17 (2020)

Machine Learning Characterization of Structural Defects in Amorphous Packings of Dimers and Ellipses

Authors: Matt Harrington, Andrea J. Liu, Douglas J. Durian

Abstract: Structural defects within amorphous packings of symmetric particles can be characterized using a machine learning approach that incorporates structure functions of radial distances and angular arrangement. This yields a scalar field, \emph{softness}, that correlates with the probability that a particle is about to rearrange. However, when particle shapes are elongated, as in the case of dimers and… ▽ More Structural defects within amorphous packings of symmetric particles can be characterized using a machine learning approach that incorporates structure functions of radial distances and angular arrangement. This yields a scalar field, \emph{softness}, that correlates with the probability that a particle is about to rearrange. However, when particle shapes are elongated, as in the case of dimers and ellipses, we find the standard structure functions produce imprecise softness measurements. Moreover, ellipses exhibit deformation profiles in stark contrast to circular particles. In order to account for effects of orientation and alignment, we introduce new structure functions to recover predictive performance of softness, as well as provide physical insight to local and extended dynamics. We study a model disordered solid, a bidisperse two-dimensional granular pillar, driven by uniaxial compression and composed entirely of monomers, dimers, or ellipses. We demonstrate how the computation of softness via support vector machine extends to dimers and ellipses with the introduction of new orientational structure functions. Then, we highlight the spatial extent of rearrangements and defects, as well as their cross-correlation, for each particle shape. Finally, we demonstrate how an additional machine learning algorithm, recursive feature elimination, provides an avenue to better understand how softness arises from particular structural aspects. We identify the most crucial structure functions in determining softness and discuss their physical implications. △ Less

Submitted 26 January, 2019; v1 submitted 8 November, 2018; originally announced November 2018.

Comments: 16 pages, 12 figures

Journal ref: Phys. Rev. E 99, 022903 (2019)

The Spectrum of Structure for Jammed and Unjammed Soft Disks

Authors: A. T. Chieco, M. Zu, A. J. Liu, N. Xu, D. J. Durian

Abstract: We investigate the short, medium, and long-range structure of soft disk configurations for a wide range of area fractions and simulation protocols by converting the real-space spectrum of volume fraction fluctuations for windows of width $L$ to the distance $h(L)$ from the window boundary over which fluctuations occur. Rapidly quenched unjammed configurations exhibit size-dependent super-Poissonia… ▽ More We investigate the short, medium, and long-range structure of soft disk configurations for a wide range of area fractions and simulation protocols by converting the real-space spectrum of volume fraction fluctuations for windows of width $L$ to the distance $h(L)$ from the window boundary over which fluctuations occur. Rapidly quenched unjammed configurations exhibit size-dependent super-Poissonian long-range features that, surprisingly, approach the totally-random limit even close to jamming. Above and just below jamming, the spectra exhibit a plateau, $h(L)=h_e$, for $L$ larger than particle size and smaller than a cutoff $L_c$ beyond which there are long-range fluctuations. The value of $h_e$ is independent of protocol and characterizes the putative hyperuniform limit. This behavior is compared with that for Einstein solids, with and without hyperuniformity-destroying defects. We find that key structural features of the particle configurations are more evident, as well as easier and more intuitive to quantify, using the real-space spectrum of hyperuniformity lengths rather than the spectral density. △ Less

Submitted 14 September, 2018; v1 submitted 26 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. E 98, 042606 (2018)

Eliminating Stripe Artifacts in Light-Sheet Fluorescence Imaging

Authors: Seyyed Muhammad Salili, Matt Harrington, Douglas J. Durian

Abstract: We report two techniques to mitigate stripe artifacts in light-sheet fluorescence imaging. The first uses an image processing algorithm called the multidirectional stripe remover (MDSR) method to filter stripes from an existing image. The second uses an elliptical holographic diffuser (EHD) with strong scattering anisotropy to prevent stripe formation during image acquisition. These techniques fac… ▽ More We report two techniques to mitigate stripe artifacts in light-sheet fluorescence imaging. The first uses an image processing algorithm called the multidirectional stripe remover (MDSR) method to filter stripes from an existing image. The second uses an elliptical holographic diffuser (EHD) with strong scattering anisotropy to prevent stripe formation during image acquisition. These techniques facilitate accurate interpretation of image data, especially in denser samples. They are also facile and cost-effective. △ Less

Submitted 22 March, 2018; v1 submitted 20 November, 2017; originally announced November 2017.

Comments: Supplementary Material available at the journal page

Journal ref: Review of Scientific Instruments 89, 036107 (2018)

The Hindered Settling Function at Low Re Has Two Branches

Authors: T. A. Brzinski III, D. J. Durian

Abstract: We analyze hindered settling speed versus volume fraction $φ$ for dispersions of monodisperse spherical particles sedimenting under gravity, using data from 15 different studies drawn from the literature, as well as 12 measurements of our own. We discuss and analyze the results in terms of popular empirical forms for the hindered settling function, and compare to the known limiting behaviors. A si… ▽ More We analyze hindered settling speed versus volume fraction $φ$ for dispersions of monodisperse spherical particles sedimenting under gravity, using data from 15 different studies drawn from the literature, as well as 12 measurements of our own. We discuss and analyze the results in terms of popular empirical forms for the hindered settling function, and compare to the known limiting behaviors. A significant finding is that the data fall onto two distinct branches, both of which are well-described by a hindered settling function of the Richardson-Zaki form $H(φ)=(1-φ)^n$ but with different exponents: $n=5.6\pm0.1$ for Brownian systems with Péclet number ${\rm Pe}<{\rm Pe}_c$, and $n=4.48\pm0.04$ for non-Brownian systems with ${\rm Pe}>{\rm Pe}_c$. The crossover Péclet number is ${\rm Pe}_c\approx10^8$, which is surprisingly large. △ Less

Submitted 12 November, 2018; v1 submitted 25 October, 2017; originally announced October 2017.

Comments: Supplementary material available on request

Journal ref: Phys. Rev. Fluids 3, 124303 (2018)

Anisotropic Particles Strengthen Granular Pillars under Compression

Authors: Matt Harrington, Douglas J. Durian

Abstract: We probe the effects of particle shape on the global and local behavior of a two-dimensional granular pillar, acting as a proxy for a disordered solid, under uniaxial compression. This geometry allows for direct measurement of global material response, as well as tracking of all individual particle trajectories. In general, drawing connections between local structure and local dynamics can be chal… ▽ More We probe the effects of particle shape on the global and local behavior of a two-dimensional granular pillar, acting as a proxy for a disordered solid, under uniaxial compression. This geometry allows for direct measurement of global material response, as well as tracking of all individual particle trajectories. In general, drawing connections between local structure and local dynamics can be challenging in amorphous materials due to lower precision of atomic positions, so this study aims to elucidate such connections. We vary local interactions by using three different particle shapes: discrete circular grains (monomers), pairs of grains bonded together (dimers), and groups of three bonded in a triangle (trimers). We find that dimers substantially strengthen the pillar and the degree of this effect is determined by orientational order in the initial condition. In addition, while the three particle shapes form void regions at distinct rates, we find that anisotropies in the local amorphous structure remain robust through the definition of a metric that quantifies packing anisotropy. Finally, we highlight connections between local deformation rates and local structure. △ Less

Submitted 20 December, 2017; v1 submitted 27 September, 2017; originally announced September 2017.

Comments: 15 pages, 15 figures

Journal ref: Phys. Rev. E 97, 012904 (2018)

Hyperuniformity Disorder Length Spectroscopy for Extended Particles

Authors: D. J. Durian

Abstract: The concept of a hyperuniformity disorder length $h$ was recently introduced for analyzing volume fraction fluctuations for a set of measuring windows. This length permits a direct connection to the nature of disorder in the spatial configuration of the particles, and provides a way to diagnose the degree of hyperuniformity in terms of the scaling of $h$ and its value in comparison with establishe… ▽ More The concept of a hyperuniformity disorder length $h$ was recently introduced for analyzing volume fraction fluctuations for a set of measuring windows. This length permits a direct connection to the nature of disorder in the spatial configuration of the particles, and provides a way to diagnose the degree of hyperuniformity in terms of the scaling of $h$ and its value in comparison with established bounds. Here, this approach is generalized for extended particles, which are larger than the image resolution and can lie partially inside and partially outside the measuring windows. The starting point is an expression for the volume fraction variance in terms of four distinct volumes: that of the particle, the measuring window, the mean-squared overlap between particle and region, and the region over which particles have non-zero overlap with the measuring window. After establishing limiting behaviors, computational methods are developed for both continuum and pixelated particles. Exact results are presented for particles of special shape, and for measuring windows of special shape. Comparison is made for other particle shapes, using simulated Poisson patterns. And the effects of polydisersity and image errors are discussed. For small measuring windows, both particle shape and spatial arrangement affect the form of the variance. For large regions, the variance scaling depends only on arrangement but particle shape sets the numerical proportionality. The combined understanding permit the measured variance to be translated to the spectrum of hyperuniformity lengths versus region size, as the quantifier of spatial arrangement. This program is demonstrated for a system of non-overlap** particles at a series of increasing packing fractions as well as for an Einstein pattern of particles with several different extended shapes. △ Less

Submitted 1 September, 2017; v1 submitted 5 July, 2017; originally announced July 2017.

Journal ref: Phys. Rev. E 96, 032910 (2017)

Characterizing Pixel and Point Patterns with a Hyperuniformity Disorder Length

Authors: A. T. Chieco, R. Dreyfus, D. J. Durian

Abstract: We introduce the concept of a hyperuniformity disorder length that controls the variance of volume fraction fluctuations for randomly placed windows of fixed size. In particular, fluctuations are determined by the average number of particles within a distance $h$ from the boundary of the window. We first compute special expectations and bounds in $d$ dimensions, and then illustrate the range of be… ▽ More We introduce the concept of a hyperuniformity disorder length that controls the variance of volume fraction fluctuations for randomly placed windows of fixed size. In particular, fluctuations are determined by the average number of particles within a distance $h$ from the boundary of the window. We first compute special expectations and bounds in $d$ dimensions, and then illustrate the range of behavior of $h$ versus window size $L$ by analyzing three different types of simulated two-dimensional pixel pattern - where particle positions are stored as a binary digital image in which pixels have value zero/one if empty/contain a particle. The first are random binomial patterns, where pixels are randomly flipped from zero to one with probability equal to area fraction. These have long-ranged density fluctuations, and simulations confirm the exact result $h=L/2$. Next we consider vacancy patterns, where a fraction $f$ of particles on a lattice are randomly removed. These also display long-range density fluctuations, but with $h=(L/2)(f/d)$ for small $f$. For a hyperuniform system with no long-range density fluctuations, we consider Einstein patterns where each particle is independently displaced from a lattice site by a Gaussian-distributed amount. For these, at large $L$, $h$ approaches a constant equal to about half the root-mean-square displacement in each dimension. Then we turn to grayscale pixel patterns that represent simulated arrangements of polydisperse particles, where the volume of a particle is encoded in the value of its central pixel. And we discuss the continuum limit of point patterns, where pixel size vanishes. In general, we thus propose to quantify particle configurations not just by the scaling of the density fluctuation spectrum but rather by the real-space spectrum of $h(L)$ versus $L$. We call this approach Hyperuniformity Disorder Length Spectroscopy. △ Less

Submitted 1 September, 2017; v1 submitted 5 July, 2017; originally announced July 2017.

Journal ref: Phys. Rev. E 96, 032909 (2017)

Border-Crossing Model for the Diffusive Coarsening of Two-Dimensional and Quasi-Two-Dimensional Wet Foams

Authors: C. D. Schimming, D. J. Durian

Abstract: For dry foams, the transport of gas from small high-pressure bubbles to large low-pressure bubbles is dominated by diffusion across the thin soap films separating neighboring bubbles. For wetter foams, the film areas become smaller as the Plateau borders and vertices inflate with liquid. So-called "border-blocking" models can explain some features of wet-foam coarsening based on the presumption th… ▽ More For dry foams, the transport of gas from small high-pressure bubbles to large low-pressure bubbles is dominated by diffusion across the thin soap films separating neighboring bubbles. For wetter foams, the film areas become smaller as the Plateau borders and vertices inflate with liquid. So-called "border-blocking" models can explain some features of wet-foam coarsening based on the presumption that the inflated borders totally block the gas flux, however, this approximation dramatically fails in the wet/unjamming limit where the bubbles become close-packed spheres and coarsening proceeds even though there are no films. Here, we account for the ever-present border-crossing flux by a new length scale defined by the average gradient of gas concentration inside the borders. We compute that it is proportional to the geometric average of film and border thicknesses, and we verify this scaling by numerical solution of the diffusion equation. We similarly consider transport across inflated vertices and surface Plateau borders in quasi-2d foams. And we show how the $dA/dt=K_0(n-6)$ von~Neumann law is modified by the appearance of terms that depend on bubble size and shape as well as the concentration gradient length scales. Finally, we use the modified von~Neumann law to compute the growth rate of the average bubble area, which is not constant. △ Less

Submitted 24 August, 2017; v1 submitted 5 June, 2017; originally announced June 2017.

Journal ref: Phys. Rev. E 96, 032805 (2017)

Friction controls submerged granular flows

Authors: Juha Koivisto, Marko Korhonen, Mikko J. Alava, Carlos P. Ortiz, Douglas J. Durian, Antti Puisto

Abstract: We investigate the coupling between interstitial medium and granular particles by studying the hopper flow of dry and submerged system experimentally and numerically. In accordance with earlier studies, we find, that the dry hopper empties at a constant rate. However, in the submerged system we observe the surging of the flow rate. We model both systems using the discrete element method, which we… ▽ More We investigate the coupling between interstitial medium and granular particles by studying the hopper flow of dry and submerged system experimentally and numerically. In accordance with earlier studies, we find, that the dry hopper empties at a constant rate. However, in the submerged system we observe the surging of the flow rate. We model both systems using the discrete element method, which we couple with computational fluid dynamics in the case of a submerged hopper. We are able to match the simulations and the experiments with good accuracy. To do that, we fit the particle-particle contact friction for each system separately, finding that submerging the hopper changes the particle-particle contact friction from $μ_{vacuum}=0.15$ to $μ_{sub}=0.13$, while all the other simulation parameters remain the same. Furthermore, our experiments find a particle size dependence to the flow rate, which is comprehended based on arguments on the terminal velocity and drag. These results jointly allow us to conclude that at the large particle limit, the interstitial medium does not matter, in contrast to small particles. The particle size limit, where this occurs depends on the viscosity of the interstitial fluid. △ Less

Submitted 7 April, 2017; v1 submitted 28 March, 2017; originally announced March 2017.

Comments: 8 pages, 8 figures, 2 Supplementary videos at https://www.youtube.com/playlist?list=PLlB0dcWeUNfvpPvM6nAU1KsGv_4wbMKPw

Effect of interstitial fluid on the fraction of flow microstates that precede clogging in granular hoppers

Authors: Juha Koivisto, Douglas J. Durian

Abstract: We report on the nature of flow events for the gravity-driven discharge of glass beads through a hole that is small enough that the hopper is susceptible to clogging. In particular, we measure the average and standard deviation of the distribution of discharged masses as a function of both hole and grain sizes. We do so in air, which is usual, but also with the system entirely submerged under wate… ▽ More We report on the nature of flow events for the gravity-driven discharge of glass beads through a hole that is small enough that the hopper is susceptible to clogging. In particular, we measure the average and standard deviation of the distribution of discharged masses as a function of both hole and grain sizes. We do so in air, which is usual, but also with the system entirely submerged under water. This damps the grain dynamics and could be expected to dramatically affect the distribution of the flow events, which are described in prior work as avalanche-like. Though the flow is slower and the events last longer, we find that the average discharge mass is only slightly reduced for submerged grains. Furthermore, we find that the shape of the distribution remains exponential, implying that clogging is still a Poisson process even for immersed grains. Per Thomas and Durian [Phys. Rev. Lett. 114, 178001 (2015]), this allows interpretation of the average discharge mass in terms of the fraction of flow microstates that precede, i.e. that effectively cause, a stable clog to form. Since this fraction is barely altered by water, we conclude that the crucial microscopic variables are the grain positions; grain momenta play only a secondary role in destabilizing weak incipient arches. These insights should aid on-going efforts to understand the susceptibility of granular hoppers to clogging. △ Less

Submitted 24 February, 2017; v1 submitted 11 January, 2017; originally announced January 2017.

Journal ref: Phys. Rev. E 95, 032904 (2017)

Intermittency and Velocity Fluctuations in Hopper Flows Prone to Clogging

Authors: C. C. Thomas, D. J. Durian

Abstract: We experimentally study the dynamics of granular media in a discharging hopper. In such flows, there often appears to be a critical outlet size $D_c$ such that the flow never clogs for $D > D_c$. We report on the time-averaged velocity distributions, as well as temporal intermittency in the ensemble-averaged velocity of grains in a viewing window, for both $D < D_c$ and $D > D_c$, near and far fro… ▽ More We experimentally study the dynamics of granular media in a discharging hopper. In such flows, there often appears to be a critical outlet size $D_c$ such that the flow never clogs for $D > D_c$. We report on the time-averaged velocity distributions, as well as temporal intermittency in the ensemble-averaged velocity of grains in a viewing window, for both $D < D_c$ and $D > D_c$, near and far from the outlet. We characterize the velocity distributions by the standard deviation and the skewness of the distribution of vertical velocities. We propose a measure for intermittency based on the two-sample Kolmogorov-Smirnov $D_{KS}$-statistic for the velocity distributions as a function of time. We find that there is no discontinuity or kink in these various measures as a function of hole size. This result supports the proposition that there is no well-defined $D_c$ and that clogging is always possible. Furthermore, the intermittency time scale of the flow is set by the speed of the grains at the hopper exit. This latter finding is consistent with a model of clogging as the independent sampling for stable configurations at the exit with a rate set by the exiting grain speed [Thomas and Durian, Phys. Rev. Lett. (2015)]. △ Less

Submitted 27 April, 2016; originally announced April 2016.

The sands of time run faster near the end

Authors: Juha Koivisto, Douglas J. Durian

Abstract: Submerged granular hoppers exhibit an unexpected surge in discharge rate as they empty [Wilson et al. 2015]. With a more sensitive apparatus, we find that this surge depends on hopper diameter and also happens in air --- though the effect is smaller and previously unnoticed. We also find that the surge may be turned off by fixing the rate of fluid flow through the granular packing. With no flow co… ▽ More Submerged granular hoppers exhibit an unexpected surge in discharge rate as they empty [Wilson et al. 2015]. With a more sensitive apparatus, we find that this surge depends on hopper diameter and also happens in air --- though the effect is smaller and previously unnoticed. We also find that the surge may be turned off by fixing the rate of fluid flow through the granular packing. With no flow control, dye injected on top of the packing gets drawn into the grains, at a rate that increases as the hopper empties. Thus we conclude that the surge is caused by a self-generated pum** of fluid through the packing. We successfully model this effect via a driving pressure set by the dilation of grains as they exit. This highlights a surprising and unrecognized role that interstitial fluid plays in setting the discharge rate, and likely also in controlling clog formation, for granular hoppers whether in air or under water. △ Less

Submitted 12 May, 2016; v1 submitted 17 February, 2016; originally announced February 2016.

Comments: Contains main article (5 pages, 4 figures) and supplemental material (8 pages, 7 figures). The supplemental video can be found at https://youtu.be/gRdiKEZbhA4

Journal ref: Nature Communications 8, 15551 (2017)

Rheology of sediment transported by a laminar flow

Authors: M. Houssais, C. P. Ortiz, D. J. Durian, D. J. Jerolmack

Abstract: Understanding the dynamics of fluid-driven sediment transport remains challenging, as it is an intermediate region between a granular material and a fluid flow. Boyer \textit{et al.}\citep{Boyer2011} proposed a local rheology unifying dense dry-granular and viscous-suspension flows, but it has been validated only for neutrally-buoyant particles in a confined system. Here we generalize the Boyer \t… ▽ More Understanding the dynamics of fluid-driven sediment transport remains challenging, as it is an intermediate region between a granular material and a fluid flow. Boyer \textit{et al.}\citep{Boyer2011} proposed a local rheology unifying dense dry-granular and viscous-suspension flows, but it has been validated only for neutrally-buoyant particles in a confined system. Here we generalize the Boyer \textit{et al.}\citep{Boyer2011} model to account for the weight of a particle by addition of a pressure $P_0$, and test the ability of this model to describe sediment transport in an idealized laboratory river. We subject a bed of settling plastic particles to a laminar-shear flow from above, and use Refractive-Index-Matching to track particles' motion and determine local rheology --- from the fluid-granular interface to deep in the granular bed. Data from all experiments collapse onto a single curve of friction $μ$ as a function of the viscous number $I_v$ over the range $10^{-5} \leq I_v \leq 1$, validating the local rheology model. For $I_v < 10^{-5}$, however, data do not collapse. Instead of undergoing a jamming transition with $μ\rightarrow μ_s$ as expected, particles transition to a cree** regime where we observe a continuous decay of the friction coefficient $μ\leq μ_s$ as $I_v$ decreases. The rheology of this creep regime cannot be described by the local model, and more work is needed to determine whether a non-local rheology model can be modified to account for our findings. △ Less

Submitted 28 September, 2015; originally announced September 2015.

Journal ref: Phys. Rev. E 94, 062609 (2016)

Divergence of Voronoi cell anisotropy vector: A threshold-free characterization of local structure in amorphous materials

Authors: Jennifer M. Rieser, Carl P. Goodrich, Andrea J. Liu, Douglas J. Durian

Abstract: Characterizing structural inhomogeneity is an essential step in understanding the mechanical response of amorphous materials. We introduce a threshold-free measure based on the field of vectors pointing from the center of each particle to the centroid of the Voronoi cell in which the particle resides. These vectors tend to point in toward regions of high free volume and away from regions of low fr… ▽ More Characterizing structural inhomogeneity is an essential step in understanding the mechanical response of amorphous materials. We introduce a threshold-free measure based on the field of vectors pointing from the center of each particle to the centroid of the Voronoi cell in which the particle resides. These vectors tend to point in toward regions of high free volume and away from regions of low free volume, reminiscent of sinks and sources in a vector field. We compute the local divergence of these vectors, for which positive values correspond to overpacked regions and negative values identify underpacked regions within the material. Distributions of this divergence are nearly Gaussian with zero mean, allowing for structural characterization using only the moments of the distribution. We explore how the standard deviation and skewness vary with packing fraction for simulations of bidisperse systems and find a kink in these moments that coincides with the jamming transition. △ Less

Submitted 22 December, 2015; v1 submitted 17 September, 2015; originally announced September 2015.

Journal ref: Phys. Rev. Lett. 116, 088001 (2016)

Deformation-Driven Diffusion and Plastic Flow in Two-Dimensional Amorphous Granular Pillars

Authors: Wenbin Li, Jennifer M. Rieser, Andrea J. Liu, Douglas J. Durian, Ju Li

Abstract: We report a combined experimental and simulation study of deformation-induced diffusion in compacted two-dimensional amorphous granular pillars, in which thermal fluctuations play negligible role. The pillars, consisting of bidisperse cylindrical acetal plastic particles standing upright on a substrate, are deformed uniaxially and quasistatically by a rigid bar moving at a constant speed. The plas… ▽ More We report a combined experimental and simulation study of deformation-induced diffusion in compacted two-dimensional amorphous granular pillars, in which thermal fluctuations play negligible role. The pillars, consisting of bidisperse cylindrical acetal plastic particles standing upright on a substrate, are deformed uniaxially and quasistatically by a rigid bar moving at a constant speed. The plastic flow and particle rearrangements in the pillars are characterized by computing the best-fit affine transformation strain and non-affine displacement associated with each particle between two stages of deformation. The non-affine displacement exhibits exponential crossover from ballistic to diffusive behavior with respect to the cumulative deviatoric strain, indicating that in athermal granular packings, the cumulative deviatoric strain plays the role of time in thermal systems and drives effective particle diffusion. We further study the size-dependent deformation of the granular pillars by simulation, and find that different-sized pillars follow self-similar shape evolution during deformation. In addition, the yield stress of the pillars increases linearly with pillar size. Formation of transient shear lines in the pillars during deformation becomes more evident as pillar size increases. The width of these elementary shear bands is about twice the diameter of a particle, and does not vary with pillar size. △ Less

Submitted 4 February, 2015; originally announced February 2015.

Comments: 14 pages, 11 figures

Journal ref: Phys. Rev. E 91, 062212 (2015)

Tunable capillary-induced attraction between vertical cylinders

Authors: Jennifer M. Rieser, P. E. Arratia, A. G. Yodh, J. P. Gollub, D. J. Durian

Abstract: Deformation of a fluid interface caused by the presence of objects at the interface can lead to large lateral forces between the objects. We explore these fluid-mediated attractive force between partially submerged vertical cylinders. Forces are experimentally measured by slowly separating cylinder pairs and cylinder triplets after capillary rise is initially established for cylinders in contact.… ▽ More Deformation of a fluid interface caused by the presence of objects at the interface can lead to large lateral forces between the objects. We explore these fluid-mediated attractive force between partially submerged vertical cylinders. Forces are experimentally measured by slowly separating cylinder pairs and cylinder triplets after capillary rise is initially established for cylinders in contact. For cylinder pairs, numerical computations and a theoretical model are found to be in good agreement with measurements. The model provides insight into the relative importance of the contributions to the total force. For small separations, the pressure term dominates, while at large separations, surface tension becomes more important. A cross-over between the two regimes occurs at a separation of around half of a capillary length. The experimentally measured forces between cylinder triplets are also in good agreement with numerical computations, and we show that pair-wise contributions account for nearly all of the attractive force between triplets. For cylinders with equilibrium capillary rise height greater than the height of the cylinder, we find that the attractive force depends on the height of the cylinders above the submersion level, which provides a means to create precisely-controlled tunable cohesive forces between objects deforming a fluid interface. △ Less

Submitted 2 December, 2014; v1 submitted 26 November, 2014; originally announced November 2014.

Fraction of clogging configurations sampled by granular hopper flow

Authors: C. C. Thomas, D. J. Durian

Abstract: We measure the fraction $F$ of flowing grain configurations that precede a clog, based on the average mass discharged between clogging events for various aperture geometries. By tilting the hopper, we demonstrate that $F$ is a function of the hole area projected in the direction of the exiting grain velocity. By varying the length of slits, we demonstrate that grains clog in the same manner as if… ▽ More We measure the fraction $F$ of flowing grain configurations that precede a clog, based on the average mass discharged between clogging events for various aperture geometries. By tilting the hopper, we demonstrate that $F$ is a function of the hole area projected in the direction of the exiting grain velocity. By varying the length of slits, we demonstrate that grains clog in the same manner as if they were flowing out of a set of smaller independent circular openings. The collapsed data for $F$ can be fit to a decay that is exponential in hole width raised to the power of the system dimensionality. This is consistent with a simple model in which individual grains near the hole have a large but constant probability to precede a clog. Such a picture implies that there is no sharp clogging transition, and that all hoppers have a nonzero probability to clog. See Supplemental Material for models of clogging as a discrete Poisson process, and for resulting alternative measures of l based on the standard deviation of the discharge mass distribution. △ Less

Submitted 5 May, 2015; v1 submitted 3 October, 2014; originally announced October 2014.

Comments: Supplemental Material available at PRL and also with source files

Journal ref: Phys. Rev. Lett. 114, 178001 (2015)

Identifying structural flow defects in disordered solids using machine learning methods

Authors: Ekin D. Cubuk, Samuel S. Schoenholz, Jennifer M. Rieser, Brad D. Malone, Joerg Rottler, Douglas J. Durian, Efthimios Kaxiras, Andrea J. Liu

Abstract: We use machine learning methods on local structure to identify flow defects - or regions susceptible to rearrangement - in jammed and glassy systems. We apply this method successfully to two disparate systems: a two dimensional experimental realization of a granular pillar under compression, and a Lennard-Jones glass in both two and three dimensions above and below its glass transition temperature… ▽ More We use machine learning methods on local structure to identify flow defects - or regions susceptible to rearrangement - in jammed and glassy systems. We apply this method successfully to two disparate systems: a two dimensional experimental realization of a granular pillar under compression, and a Lennard-Jones glass in both two and three dimensions above and below its glass transition temperature. We also identify characteristics of flow defects that differentiate them from the rest of the sample. Our results show it is possible to discern subtle structural features responsible for heterogeneous dynamics observed across a broad range of disordered materials. △ Less

Submitted 24 September, 2014; originally announced September 2014.

Comments: 4 pages, 4 figures

Journal ref: Phys. Rev. Lett. 114, 108001 (2015)

Rheology of nearly ideal 3d foams

Authors: C. D. Jones, K. N. Nordstrom, D. J. Durian

Abstract: We probe the complex rheology of nearly ideal 3d foam by flowing through a narrow column. The foams we investigate have large bubble size, to minimize the effects of coarsening, and are very dry. Foams of this type cannot be studied via conventional rheometry. The foam flows upward through a vertical rectangular column with a 4:1 cross-sectional aspect ratio, by bubbling gas through a soapy soluti… ▽ More We probe the complex rheology of nearly ideal 3d foam by flowing through a narrow column. The foams we investigate have large bubble size, to minimize the effects of coarsening, and are very dry. Foams of this type cannot be studied via conventional rheometry. The foam flows upward through a vertical rectangular column with a 4:1 cross-sectional aspect ratio, by bubbling gas through a soapy solution at the base of our apparatus. At the column's narrow surfaces are sticky boundaries, which create shear due to the zero velocity boundary condition. As expected, the flow profile between the adjacent slippery broad faces is flat, however the profile between the narrow, sticky faces exhibits a curved velocity profile that is dependent on gas flow rate. We are able to analyze a 2d velocity profile from a 3d bulk system. We employ particle image velocimetry to measure the strain rate, and compute the stress from the pressure drop along the channel, to investigate the local stress-strain relationships in a flowing foam. We find these dry foams to have a Hershel-Bulkley exponent of 0.21, which is significantly lower (more shear thinning) than other results shown in the literature for much wetter foams. △ Less

Submitted 10 April, 2014; originally announced April 2014.

Penetration depth scaling for impact into wet granular packings

Authors: Theodore A. Brzinski III, Jorin Schug, Kelly Mao, Douglas J. Durian

Abstract: We present experimental measurements of penetration depths for the impact of spheres into wetted granular media. We observe that the penetration depth in the liquid saturated case scales with projectile density, size, and drop height in a fashion consistent with the scaling observed in the dry case, but that penetration depths into saturated packings tend to be smaller. This result suggests that,… ▽ More We present experimental measurements of penetration depths for the impact of spheres into wetted granular media. We observe that the penetration depth in the liquid saturated case scales with projectile density, size, and drop height in a fashion consistent with the scaling observed in the dry case, but that penetration depths into saturated packings tend to be smaller. This result suggests that, for the range of impact energies observed, the stop** force is set by static contact forces between grains within the bed, and that the presence of liquid serves, primarily, to enhance these contact forces. The enhancement to the stop** force has a complicated dependence on liquid fraction, accompanied by a change in the drop-height dependence, that must be the consequence of accompanying changes in the conformation of the liquid phase in the interstices. △ Less

Submitted 24 January, 2015; v1 submitted 31 March, 2014; originally announced March 2014.

Comments: 7 pages, 4 figures, to be published in Phys. Rev. E

Kinetics of Gravity-Driven Water Channels Under Steady Rainfall

Authors: Cesare M. Cejas, Yuli Wei, Remi Barrois, Christian Fretigny, Douglas J. Durian, Remi Dreyfus

Abstract: We investigate the formation of fingered flow in dry granular media under simulated rainfall using a quasi-2D experimental set-up composed of a random close packing of mono-disperse glass beads. Using controlled experiments, we analyze the finger instabilities that develop from the wetting front as a function of fundamental granular (particle size) and fluid properties (rainfall, viscosity).These… ▽ More We investigate the formation of fingered flow in dry granular media under simulated rainfall using a quasi-2D experimental set-up composed of a random close packing of mono-disperse glass beads. Using controlled experiments, we analyze the finger instabilities that develop from the wetting front as a function of fundamental granular (particle size) and fluid properties (rainfall, viscosity).These finger instabilities act as precursors for water channels, which serve as outlets for water drainage. We look into the characteristics of the homogeneous wetting front and channel size as well as estimate relevant time scales involved in the instability formation and the velocity of the channel finger tip. We compare our experimental results with that of the well-known prediction developed by Parlange and Hill [1976]. This model is based on linear stability analysis of the growth of perturbations arising at the interface between two immiscible fluids. Results show that in terms of morphology, experiments agree with the proposed model. However, in terms of kinetics we nevertheless account for another term that describes the homogenization of the wetting front. This result shows that the manner we introduce the fluid to a porous medium can also influence the formation of finger instabilities. △ Less

Submitted 14 March, 2014; v1 submitted 13 March, 2014; originally announced March 2014.

Comments: 13 pages, 7 figures

Journal ref: Phys. Rev E 90, 042205 (2014)

Morphology of rain water channelization in systematically varied model sandy soils

Authors: Y. Wei, C. M. Cejas, R. Barrois, R. Dreyfus, D. J. Durian

Abstract: We visualize the formation of fingered flow in dry model sandy soils under different raining conditions using a quasi-2d experimental set-up, and systematically determine the impact of soil grain diameter and surface wetting property on water channelization phenomenon. The model sandy soils we use are random closely-packed glass beads with varied diameters and surface treatments. For hydrophilic s… ▽ More We visualize the formation of fingered flow in dry model sandy soils under different raining conditions using a quasi-2d experimental set-up, and systematically determine the impact of soil grain diameter and surface wetting property on water channelization phenomenon. The model sandy soils we use are random closely-packed glass beads with varied diameters and surface treatments. For hydrophilic sandy soils, our experiments show that rain water infiltrates into a shallow top layer of soil and creates a horizontal water wetting front that grows downward homogeneously until instabilities occur to form fingered flows. For hydrophobic sandy soils, in contrast, we observe that rain water ponds on the top of soil surface until the hydraulic pressure is strong enough to overcome the capillary repellency of soil and create narrow water channels that penetrate the soil packing. Varying the raindrop im**ing speed has little influence on water channel formation. However, varying the rain rate causes significant changes in water infiltration depth, water channel width, and water channel separation. At a fixed raining condition, we combine the effects of grain diameter and surface hydrophobicity into a single parameter and determine its influence on water infiltration depth, water channel width, and water channel separation. We also demonstrate the efficiency of several soil water improvement methods that relate to rain water channelization phenomenon, including pre-wetting sandy soils at different level before rainfall, modifying soil surface flatness, and applying superabsorbent hydrogel particles as soil modifiers. △ Less

Submitted 13 March, 2014; originally announced March 2014.

Journal ref: Physical Review Applied 2, 044004 (2014)

Rain water transport and storage in a model sandy soil with hydrogel particle additives

Authors: Y. Wei, D. J. Durian

Abstract: We study rain water infiltration and drainage in a dry model sandy soil with superabsorbent hydrogel particle additives by measuring the mass of retained water for non-ponding rainfall using a self-built 3D laboratory set-up. In the pure model sandy soil, the retained water curve measurements indicate that instead of a stable horizontal wetting front that grows downward uniformly, a narrow fingere… ▽ More We study rain water infiltration and drainage in a dry model sandy soil with superabsorbent hydrogel particle additives by measuring the mass of retained water for non-ponding rainfall using a self-built 3D laboratory set-up. In the pure model sandy soil, the retained water curve measurements indicate that instead of a stable horizontal wetting front that grows downward uniformly, a narrow fingered flow forms under the top layer of water-saturated soil. This rain water channelization phenomenon not only further reduces the available rain water in the plant root zone, but also affects the efficiency of soil additives, such as superabsorbent hydrogel particles. Our studies show that the shape of the retained water curve for a soil packing with hydrogel particle additives strongly depends on the location and the concentration of the hydrogel particles in the model sandy soil. By carefully choosing the particle size and distribution methods, we may use the swollen hydrogel particles to modify the soil pore structure, to clog or extend the water channels in sandy soils, or to build water reservoirs in the plant root zone. △ Less

Submitted 10 February, 2014; v1 submitted 23 October, 2013; originally announced October 2013.

Journal ref: European Physical Journal E 37, 97 (2014)