-
Surface temperature and emissivity measurement for materials exposed to a flame through two-color IR-thermography
Authors:
Tanja Pelzmann,
Fabien Dupont,
Benjamin Sauté,
Étienne Robert
Abstract:
Two-color (2C) pyrometry has long been used for flame temperature and soot concentration studies and is now becoming more widely used to measure surface temperatures of burning materials. With the obvious advantage of being a contact-free method that requires only minimal optical access, 2C pyrometry combined with high-speed acquisition is a promising diagnostic tool to obtain exceptional temporal…
▽ More
Two-color (2C) pyrometry has long been used for flame temperature and soot concentration studies and is now becoming more widely used to measure surface temperatures of burning materials. With the obvious advantage of being a contact-free method that requires only minimal optical access, 2C pyrometry combined with high-speed acquisition is a promising diagnostic tool to obtain exceptional temporal and spatial resolution of thermally degrading samples. However, its conceptual simplicity relies on a set of basic assumptions that when violated can result in large errors. In this work, we use an experimental configuration representative for fire resistance testing for aerospace and naval applications to analyze the impact of camera parameters and test setup on the accuracy of the surface temperature results obtained. Two types of fibre reinforced polymer composites and a steel plate are used to investigate material specific aspects that effect the measurements. An improved workflow for camera calibration is presented that takes the actual experimental setup into account. The temperature and emissivity map** obtained trough in-situ IR measurements is compared against data acquired trough thermocouples and post-fire hemispherical directional reflectance measurements at room temperature. This comparison illustrates the necessity for proper post-processing and demonstrates that emissivity values obtained from pristine or burnt samples are not well suited to obtain accurate surface temperatures through conventional (single color) IR thermography. We also present a detailed error budget and suggestions for calibration measurements to keep the overall error well below 50 K in a temperature range from 673 K - 1473 K.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
Textured Mesh Quality Assessment: Large-Scale Dataset and Deep Learning-based Quality Metric
Authors:
Yana Nehmé,
Johanna Delanoy,
Florent Dupont,
Jean-Philippe Farrugia,
Patrick Le Callet,
Guillaume Lavoué
Abstract:
Over the past decade, 3D graphics have become highly detailed to mimic the real world, exploding their size and complexity. Certain applications and device constraints necessitate their simplification and/or lossy compression, which can degrade their visual quality. Thus, to ensure the best Quality of Experience (QoE), it is important to evaluate the visual quality to accurately drive the compress…
▽ More
Over the past decade, 3D graphics have become highly detailed to mimic the real world, exploding their size and complexity. Certain applications and device constraints necessitate their simplification and/or lossy compression, which can degrade their visual quality. Thus, to ensure the best Quality of Experience (QoE), it is important to evaluate the visual quality to accurately drive the compression and find the right compromise between visual quality and data size. In this work, we focus on subjective and objective quality assessment of textured 3D meshes. We first establish a large-scale dataset, which includes 55 source models quantitatively characterized in terms of geometric, color, and semantic complexity, and corrupted by combinations of 5 types of compression-based distortions applied on the geometry, texture map** and texture image of the meshes. This dataset contains over 343k distorted stimuli. We propose an approach to select a challenging subset of 3000 stimuli for which we collected 148929 quality judgments from over 4500 participants in a large-scale crowdsourced subjective experiment. Leveraging our subject-rated dataset, a learning-based quality metric for 3D graphics was proposed. Our metric demonstrates state-of-the-art results on our dataset of textured meshes and on a dataset of distorted meshes with vertex colors. Finally, we present an application of our metric and dataset to explore the influence of distortion interactions and content characteristics on the perceived quality of compressed textured meshes.
△ Less
Submitted 8 May, 2023; v1 submitted 4 February, 2022;
originally announced February 2022.
-
Multi-resolution deep learning pipeline for dense large scale point clouds
Authors:
Thomas Richard,
Florent Dupont,
Guillaume Lavoue
Abstract:
Recent development of 3D sensors allows the acquisition of extremely dense 3D point clouds of large-scale scenes. The main challenge of processing such large point clouds remains in the size of the data, which induce expensive computational and memory cost. In this context, the full resolution cloud is particularly hard to process, and details it brings are rarely exploited. Although fine-grained…
▽ More
Recent development of 3D sensors allows the acquisition of extremely dense 3D point clouds of large-scale scenes. The main challenge of processing such large point clouds remains in the size of the data, which induce expensive computational and memory cost. In this context, the full resolution cloud is particularly hard to process, and details it brings are rarely exploited. Although fine-grained details are important for detection of small objects, they can alter the local geometry of large structural parts and mislead deep learning networks. In this paper, we introduce a new generic deep learning pipeline to exploit the full precision of large scale point clouds, but only for objects that require details. The core idea of our approach is to split up the process into multiple sub-networks which operate on different resolutions and with each their specific classes to retrieve. Thus, the pipeline allows each class to benefit either from noise and memory cost reduction of a sub-sampling or from fine-grained details.
△ Less
Submitted 23 September, 2021;
originally announced September 2021.
-
Partitioning the universe into gravitational basins using the cosmic velocity field
Authors:
A. Dupuy,
H. M. Courtois,
F. Dupont,
F. Denis,
R. Graziani,
Y. Copin,
D. Pomarede,
N. Libeskind,
E. Carlesi,
B. Tully,
D. Guinet
Abstract:
This letter presents a new approach using the cosmic peculiar velocity field to characterize the morphology and size of large scale structures in the local Universe. The algorithm developed uses the three-dimensional peculiar velocity field to compute flow lines, or streamlines. The local Universe is then partitioned into volumes corresponding to gravitational basins, also called watersheds, among…
▽ More
This letter presents a new approach using the cosmic peculiar velocity field to characterize the morphology and size of large scale structures in the local Universe. The algorithm developed uses the three-dimensional peculiar velocity field to compute flow lines, or streamlines. The local Universe is then partitioned into volumes corresponding to gravitational basins, also called watersheds, among the different end-points of the velocity flow lines. This new methodology is first tested on numerical cosmological simulations, used as benchmark for the method, and then applied to the {\it Cosmic-Flows} project observational data in order to to pay particular attention to the nearby superclusters including ours. More extensive tests on both simulated and observational data will be discussed in an accompanying paper.
△ Less
Submitted 15 July, 2019;
originally announced July 2019.
-
Drop Formation in a One-Dimensional Approximation of the Navier-Stokes Equation
Authors:
Jens Eggers,
Todd F. Dupont
Abstract:
We consider the viscous motion of a thin, axisymmetric column of fluid with a free surface. A one-dimensional equation of motion for the velocity and the radius is derived from the Navier-Stokes equation. We compare with recent experiments on the breakup of a liquid jet and on the bifurcation of a drop suspended from an orifice. The equations form singularities as the fluid neck is pinching off.…
▽ More
We consider the viscous motion of a thin, axisymmetric column of fluid with a free surface. A one-dimensional equation of motion for the velocity and the radius is derived from the Navier-Stokes equation. We compare with recent experiments on the breakup of a liquid jet and on the bifurcation of a drop suspended from an orifice. The equations form singularities as the fluid neck is pinching off. The nature of the singularities is investigated in detail.
△ Less
Submitted 28 October, 2001;
originally announced October 2001.
-
Influence of Nd on the magnetic properties of Nd1-xCaxMnO3
Authors:
F. Dupont,
F. Millange,
S. de Brion,
A. Janossy,
G. Chouteau
Abstract:
The role played by the Nd ions in the magnetic properties of Nd0.5Ca0.5MnO3 and Nd0.7Ca0.3MnO3 is studied using static magnetization, neutron diffraction and high frequency (9.4-475GHz) Electron Spin Resonance. We show that the Nd ions are weakly coupled to the Mn ions via ferromagnetic exchange and are responsible for the peculiar ferromagnetic resonance observed in the FM phase of both compoun…
▽ More
The role played by the Nd ions in the magnetic properties of Nd0.5Ca0.5MnO3 and Nd0.7Ca0.3MnO3 is studied using static magnetization, neutron diffraction and high frequency (9.4-475GHz) Electron Spin Resonance. We show that the Nd ions are weakly coupled to the Mn ions via ferromagnetic exchange and are responsible for the peculiar ferromagnetic resonance observed in the FM phase of both compounds (ground state below 120K for x=0.3, high field state for x=0.5). We then use ESR to look for magnetic phase separation in the low field, CO phase of Nd0.5Ca0.5MnO3. We show that there is no trace of the FM phase imbedded in the CO phase, contrary to what is observed in La0.5Ca0.5MnO3 or Pr0.5Sr0.5MnO3.
△ Less
Submitted 8 October, 2001;
originally announced October 2001.
-
Sonoluminescing air bubbles rectify argon
Authors:
Detlef Lohse,
Michael P. Brenner,
Todd F. Dupont,
Sascha Hilgenfeldt,
Blaine Johnston
Abstract:
The dynamics of single bubble sonoluminescence (SBSL) strongly depends on the percentage of inert gas within the bubble. We propose a theory for this dependence, based on a combination of principles from sonochemistry and hydrodynamic stability. The nitrogen and oxygen dissociation and subsequent reaction to water soluble gases implies that strongly forced air bubbles eventually consist of pure…
▽ More
The dynamics of single bubble sonoluminescence (SBSL) strongly depends on the percentage of inert gas within the bubble. We propose a theory for this dependence, based on a combination of principles from sonochemistry and hydrodynamic stability. The nitrogen and oxygen dissociation and subsequent reaction to water soluble gases implies that strongly forced air bubbles eventually consist of pure argon. Thus it is the partial argon (or any other inert gas) pressure which is relevant for stability. The theory provides quantitative explanations for many aspects of SBSL.
△ Less
Submitted 7 August, 1997; v1 submitted 7 May, 1996;
originally announced May 1996.
-
Bubble Shape Oscillations and the Onset of Sonoluminescence
Authors:
Michael P. Brenner,
Detlef Lohse,
T. F. Dupont
Abstract:
An air bubble trapped in water by an oscillating acoustic field undergoes either radial or nonspherical pulsations depending on the strength of the forcing pressure. Two different instability mechanisms (the Rayleigh--Taylor instability and parametric instability) cause deviations from sphericity. Distinguishing these mechanisms allows explanation of many features of recent experiments on sonolumi…
▽ More
An air bubble trapped in water by an oscillating acoustic field undergoes either radial or nonspherical pulsations depending on the strength of the forcing pressure. Two different instability mechanisms (the Rayleigh--Taylor instability and parametric instability) cause deviations from sphericity. Distinguishing these mechanisms allows explanation of many features of recent experiments on sonoluminescence, and suggests methods for finding sonoluminescence in different parameter regimes.
△ Less
Submitted 28 June, 1995; v1 submitted 13 April, 1995;
originally announced April 1995.
