-
Quantifying Intuition: Bayesian Approach to Figures of Merit in EXAFS Analysis of Magic Size Clusters
Authors:
Lucy Haddad,
Diego Gianolio,
David J. Dunstan,
Andrei Sapelkin
Abstract:
Analysis of the extended X-ray absorption fine structure (EXAFS) can yield local structural information in magic size clusters even when other structural methods (such as X-ray diffraction) fail, but typically requires an initial guess -- an atomistic model. Model comparison is thus one of the most crucial steps in establishing atomic structure of nanoscale systems and relies critically on the cor…
▽ More
Analysis of the extended X-ray absorption fine structure (EXAFS) can yield local structural information in magic size clusters even when other structural methods (such as X-ray diffraction) fail, but typically requires an initial guess -- an atomistic model. Model comparison is thus one of the most crucial steps in establishing atomic structure of nanoscale systems and relies critically on the corresponding figures of merit (delivered by the data analysis) to make a decision on the most suitable model of atomic arrangements. However, none of the currently used statistical figures of merit take into account such significant factor as parameter correlations. Here we show that ignoring such correlations may result in a selection of an incorrect structural model. We then report on a new metric based on Bayes theorem that addresses this problem. We show that our new metric is superior to the currently used in EXAFS analysis as it reliably yields correct structural models even in cases when other statistical criteria may fail. We then demonstrate the utility of the new figure of merit in comparison of structural models for CdS magic-size clusters using EXAFS data.
△ Less
Submitted 3 November, 2023; v1 submitted 1 November, 2023;
originally announced November 2023.
-
Interfacial stress transfer in monolayer and few-layer MoS2 nanosheets in model nanocomposites
Authors:
Ming Dong,
Robert J. Young,
David J. Dunstan,
Dimitrios G. Papageorgiou
Abstract:
Understanding the stress transfer mechanisms from a polymer matrix to two-dimensional reinforcements is essential for the preparation of high performance nanocomposites. In this study, the interfacial stress transfer from a flexible polymer substrate to monolayer and few-layer molybdenum disulfide MoS2 under tension has been investigated. Layer-dependent and strain-dependent photoluminescence (PL)…
▽ More
Understanding the stress transfer mechanisms from a polymer matrix to two-dimensional reinforcements is essential for the preparation of high performance nanocomposites. In this study, the interfacial stress transfer from a flexible polymer substrate to monolayer and few-layer molybdenum disulfide MoS2 under tension has been investigated. Layer-dependent and strain-dependent photoluminescence (PL) spectroscopy were used to examine the stress transfer efficiency.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
Carbon nanotubes collapse phase diagram with arbitrary number of walls. Collapse modes and macroscopic analog
Authors:
Y. Magnin,
F. Rondepierre,
W. Cui,
D. J. Dunstan,
A. San-Miguel
Abstract:
Carbon nanotubes tend to collapse when their diameters exceed a certain threshold, or when a sufficiently large external pressure is applied on their walls. Their radial stability of tubes has been studied in each of these cases, however a general theory able to predict collapse is still lacking. Here, we propose a simple model predicting stability limits as a function of the tube diameter, the nu…
▽ More
Carbon nanotubes tend to collapse when their diameters exceed a certain threshold, or when a sufficiently large external pressure is applied on their walls. Their radial stability of tubes has been studied in each of these cases, however a general theory able to predict collapse is still lacking. Here, we propose a simple model predicting stability limits as a function of the tube diameter, the number of walls and the pressure. The model is supported by atomistic simulations, experiments, and is used to plot collapse phase diagrams. We have identified the most stable carbon nanotube, which can support a maximum pressure of 18 GPa before collapsing. The latter was identified as a multiwall tube with an internal tube diameter of 12nm and 30 walls. This maximum pressure is lowered depending on the internal tube diameter and the number of walls. We then identify a tube diameter domain in which the radial mechanical stability can be treated as equivalent to macroscopic tubes, known to be described by the canonical Lévy-Carrier law. This multiscale behavior is shown to be in good agreement with experiments based on O-ring gaskets collapse, proposed as a simple macroscopic parallel to nanotubes in this domain.
△ Less
Submitted 29 January, 2021;
originally announced January 2021.
-
Softening of the Euler buckling criterion under discretisation of compliance
Authors:
D. J. Carter,
D. J. Dunstan,
W. Just,
O. F. Bandtlow,
A. San Miguel
Abstract:
Euler solved the problem of the collapse of tall thin columns under unexpectedly small loads in 1744. The analogous problem of the collapse of circular elastic rings or tubes under external pressure was mathematically intractable and only fully solved recently. In the context of carbon nanotubes, an additional phenomenon was found experimentally and in atomistic simulations but not explained: the…
▽ More
Euler solved the problem of the collapse of tall thin columns under unexpectedly small loads in 1744. The analogous problem of the collapse of circular elastic rings or tubes under external pressure was mathematically intractable and only fully solved recently. In the context of carbon nanotubes, an additional phenomenon was found experimentally and in atomistic simulations but not explained: the collapse pressure of smaller diameter tubes deviates below the continuum mechanics solution [Torres-Dias et al., Carbon 123, 145 (2017)]. Here, this deviation is shown to occur in discretized straight columns and it is fully explained in terms of the phonon dispersion curve. This reveals an unexpected link between the static mechanical properties of discrete systems and their dynamics described through dispersion curves.
△ Less
Submitted 28 November, 2020;
originally announced November 2020.
-
Graphene on silicon: effects of the silicon surface orientation on the work function and carrier density of graphene
Authors:
Y. W. Sun,
D. Holec,
D. Gehringer,
L. Li,
O. Fenwick,
D. J. Dunstan,
C. J. Humphreys
Abstract:
Density functional theory has been employed to study graphene on the (111), (100) and (110) surfaces of silicon (Si) substrates. There are several interesting findings. First, carbon atoms in graphene form covalent bonds with Si atoms, when placed close enough on Si (111) and (100) surfaces, but not on the (110) surface. The presence of a Si (111) surface shifts the Fermi level of graphene into it…
▽ More
Density functional theory has been employed to study graphene on the (111), (100) and (110) surfaces of silicon (Si) substrates. There are several interesting findings. First, carbon atoms in graphene form covalent bonds with Si atoms, when placed close enough on Si (111) and (100) surfaces, but not on the (110) surface. The presence of a Si (111) surface shifts the Fermi level of graphene into its conduction band, resulting in an increase of the work function by 0.29 eV and of the electron density by three orders of magnitude. The carrier density of graphene can also be increased by eighty times on a Si (100) substrate without do**, due to the modification of the density of states near the Dirac point. No interfacial covalent bond can be formed on Si (110). These striking effects that different orientations of a silicon substrate can have on the properties of graphene are related to the surface density of the silicon surface. Applying the results to a real device of a specific orientation requires further consideration of surface reconstructions, lattice mismatch, temperature, and environmental effects.
△ Less
Submitted 12 July, 2021; v1 submitted 6 October, 2020;
originally announced October 2020.
-
Easy computation of the Bayes Factor to fully quantify Occam's razor
Authors:
David J. Dunstan,
Joel Crowne,
Alan J. Drew
Abstract:
The Bayes factor is the gold-standard figure of merit for comparing fits of models to data, for hypothesis selection and parameter estimation. However it is little used because it is computationally very intensive. Here it is shown how Bayes factors can be calculated accurately and easily, so that any least-squares or maximum-likelihood fits may be routinely followed by the calculation of Bayes fa…
▽ More
The Bayes factor is the gold-standard figure of merit for comparing fits of models to data, for hypothesis selection and parameter estimation. However it is little used because it is computationally very intensive. Here it is shown how Bayes factors can be calculated accurately and easily, so that any least-squares or maximum-likelihood fits may be routinely followed by the calculation of Bayes factors to guide the best choice of model and hence the best estimations of parameters. Approximations to the Bayes factor, such as the Bayesian Information Criterion (BIC), are increasingly used. Occam's razor expresses a primary intuition, that parameters should not be multiplied unnecessarily, and that is quantified by the BIC. The Bayes factor quantifies two further intuitions. Models with physically-meaningful parameters are preferable to models with physically-meaningless parameters. Models that could fail to fit the data, yet which do fit, are preferable to models which span the data space and are therefore guaranteed to fit the data. The outcomes of using Bayes factors are often very different from traditional statistics tests and from the BIC. Three examples are given. In two of these examples, the easy calculation of the Bayes factor is exact. The third example illustrates the rare conditions under which it has some error and shows how to diagnose and correct the error.
△ Less
Submitted 19 July, 2020;
originally announced July 2020.
-
3D strain in 2D materials: Experimental test in unsupported monolayer graphene under pressure
Authors:
Y. W. Sun,
W. Liu,
I. Hernandez,
J. Gonzalez,
F. Rodriguez,
D. J. Dunstan,
C. J. Humphreys
Abstract:
Previous Raman measurements on supported graphene under high pressure reported a very different shift rate of in-plane phonon frequency of graphene (16 cm$^{-1}$GPa$^{-1}$) from graphite (4.7 cm$^{-1}$GPa$^{-1}$), implying very different in-plane anharmonicity that graphene gets stiffer than graphite in-plane under the same pressure. It was suggested that it could be due to the adhesion of graphen…
▽ More
Previous Raman measurements on supported graphene under high pressure reported a very different shift rate of in-plane phonon frequency of graphene (16 cm$^{-1}$GPa$^{-1}$) from graphite (4.7 cm$^{-1}$GPa$^{-1}$), implying very different in-plane anharmonicity that graphene gets stiffer than graphite in-plane under the same pressure. It was suggested that it could be due to the adhesion of graphene to substrates. We have therefore performed high pressure Raman measurements on unsupported graphene and we find a similar in-plane stiffness and anharmonicity of graphene (5.4 cm$^{-1}$GPa$^{-1}$) to graphite. On the other hand, the out-of-plane stiffness of graphene is hard to define, due to the 2D nature of graphene. However, we estimate a similar out-of-plane stiffness of graphene (1.4$\pm$295 GPa) to that of graphite (38.7$\pm$7 GPa), by measuring its effect on the shift of the in-plane phonon frequency with pressure.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
The Effect of Humidity on the Interlayer Interaction of Bi-layer Graphene
Authors:
A. Qadir,
Y. W. Sun,
W. Liu,
P. Goldberg Oppenheimer,
Y. Xu,
C. J. Humphreys,
D. J. Dunstan
Abstract:
The lubricating ability of graphite largely depends on the environmental humidity, essentially the amount of water in between its layers. In general, intercalated molecules in layered materials modify their extraordinary properties by interacting with the layers. To understand the interaction of intercalated water molecules with graphene layers, we performed Raman measurements on bi-layer graphene…
▽ More
The lubricating ability of graphite largely depends on the environmental humidity, essentially the amount of water in between its layers. In general, intercalated molecules in layered materials modify their extraordinary properties by interacting with the layers. To understand the interaction of intercalated water molecules with graphene layers, we performed Raman measurements on bi-layer graphene at various humidity levels and observed an additional peak close to that of the low-frequency layer breathing mode between two graphene layers. The additional peak is attributed to the vibration between an intercalated water layer and the graphene layers. We further propose that the monolayer coverage of water increases between bilayer graphene with increasing environmental humidity while the interaction between the water layer and graphene layers remains approximately unchanged, until too much water is intercalated to keep the monolayer structure, at just over 50\% relative humidity. Notably, the results suggest that unexpectedly humidity could be an important factor affecting the properties of layered materials, as it significantly modifies the interlayer interaction.
△ Less
Submitted 25 September, 2018;
originally announced September 2018.
-
Quantitative explanation of the reported values of the Hall-Petch parameter
Authors:
Y. Li,
A. J. Bushby,
D. J. Dunstan
Abstract:
The Hall-Petch effect has been described for the past sixty years as a dependence of the strength of polycrystalline metals on the inverse square-root of grain size d. The value of the coefficient of the dependence has been the subject of discussion throughout. Here, we find what factors in the experiments determine its values. A meta-analysis using maximum-likelihood methods is reported of the li…
▽ More
The Hall-Petch effect has been described for the past sixty years as a dependence of the strength of polycrystalline metals on the inverse square-root of grain size d. The value of the coefficient of the dependence has been the subject of discussion throughout. Here, we find what factors in the experiments determine its values. A meta-analysis using maximum-likelihood methods is reported of the literature values of the coefficient in sixty-one datasets. Weak dependence is found on composition and bulk strength. Clear dependence is found on the elastic anisotropy of the different metals and on their stacking fault energies. Surprisingly, no dependence is found on plastic strain, and the strongest dependence is found on the average grain size of each study. Combining these effects accounts for the reported values of about 80% of the sixty-one coefficients. The grain-size dependence and the bulk strength dependence indicate that the Hall-Petch coefficient is an artefact arising from incorrect fitting of the data. Moreover, the grain-size dependence implies a minimum strength described by a simple inverse 1/d or a lnd/d function, which arises theoretically from considerations of dislocation curvature.
△ Less
Submitted 26 August, 2018;
originally announced August 2018.
-
Graphite Under Compression: Shift of Layer Breathing and Shear Modes Frequencies with Interlayer Spacing
Authors:
Y. W. Sun,
D. Holec,
Y. Xu,
D. J. Dunstan
Abstract:
Layered materials have huge potential in various applications due to their extraordinary properties. To determine the interlayer interaction (or equivalently the layer spacing under different perturbations) is of critical importance. In this letter, we focus on one of the most prominent layered materials, graphite, and theoretically quantify the relationship between its interlayer spacing and the…
▽ More
Layered materials have huge potential in various applications due to their extraordinary properties. To determine the interlayer interaction (or equivalently the layer spacing under different perturbations) is of critical importance. In this letter, we focus on one of the most prominent layered materials, graphite, and theoretically quantify the relationship between its interlayer spacing and the vibrational frequencies of its layer breathing and shear modes, which are measures of the interlayer interaction. The method used here to determine the interlayer interaction can be further applied to other layered materials.
△ Less
Submitted 13 April, 2017;
originally announced April 2017.
-
The new high field photoexcitation muon spectrometer at the ISIS pulsed neutron and muon source
Authors:
K. Yokoyama,
J. S. Lord,
P. Murahari,
K. Wang,
D. J. Dunstan,
S. P. Waller,
D. J. McPhail,
A. D. Hillier,
J. Henson,
M. R. Harper,
P. Heathcote,
A. J. Drew
Abstract:
A high power pulsed laser system has been installed on the high magnetic field muon spectrometer (HiFi) at the ISIS pulsed neutron and muon source, situated at the STFC Rutherford Appleton Laboratory in the UK. The upgrade enables one to perform light-pump muon-probe experiments under a high magnetic field, which opens new applications of muon spin spectroscopy. In this report we give an overview…
▽ More
A high power pulsed laser system has been installed on the high magnetic field muon spectrometer (HiFi) at the ISIS pulsed neutron and muon source, situated at the STFC Rutherford Appleton Laboratory in the UK. The upgrade enables one to perform light-pump muon-probe experiments under a high magnetic field, which opens new applications of muon spin spectroscopy. In this report we give an overview of the principle of the HiFi Laser system, and describe the newly developed techniques and devices that enable precisely controlled photoexcitation of samples in the muon instrument. A demonstration experiment illustrates the potential of this unique combination of the photoexcited system and avoided level crossing technique.
△ Less
Submitted 21 January, 2017; v1 submitted 20 July, 2016;
originally announced July 2016.
-
The Hall-Petch effect as a manifestation of the general size effect
Authors:
Yuan Li,
Andy J. Bushby,
David J. Dunstan
Abstract:
The experimental evidence for the Hall-Petch dependence of strength on the inverse square-root of grain size is reviewed critically. Both the classic data and more recent results are considered. While the data can be fitted to the inverse square-root dependence excellently (but using two free fitting parameters for each dataset), it is also consistent with a dependence on the simple inverse of gra…
▽ More
The experimental evidence for the Hall-Petch dependence of strength on the inverse square-root of grain size is reviewed critically. Both the classic data and more recent results are considered. While the data can be fitted to the inverse square-root dependence excellently (but using two free fitting parameters for each dataset), it is also consistent with a dependence on the simple inverse of grain size (with one free fitting parameter for each dataset). There have been difficulties, recognised for half-a-century, in explaining the inverse square-root expression. A Bayesian analysis shows that the data strongly supports the simple inverse expression proposed. Since this expression derives from underlying theory, it is also more readily explicable. It is concluded that the Hall-Petch effect is not to be explained by the variety of theories found in the literature, but is a manifestation of, or underlain by, the general size effect observed throughout micromechanics, due to the inverse relationship between the stress required and the space available for dislocation sources to operate.
△ Less
Submitted 5 July, 2015;
originally announced July 2015.
-
Graphite under uniaxial compression along c-axis: a new parameter relates out-of-plane strain to in-plane phonon frequency
Authors:
Y. W. Sun,
D. Holec,
D. J. Dunstan
Abstract:
Stacking graphene sheets forms graphite. Two in-plane vibrational modes of graphite, E1u and E2g(2), are derived from graphene E2g mode, the shifts of which under compression are all considered as results of in-plane bond shortening. Values of Gruneisen parameter have been reported to quantify such relation. However, the reason why the shift rates of these three modes with pressure differ is uncl…
▽ More
Stacking graphene sheets forms graphite. Two in-plane vibrational modes of graphite, E1u and E2g(2), are derived from graphene E2g mode, the shifts of which under compression are all considered as results of in-plane bond shortening. Values of Gruneisen parameter have been reported to quantify such relation. However, the reason why the shift rates of these three modes with pressure differ is unclear. In this work, we introduce a new parameter to quantify the contribution of out-of-plane strain to the in-plane vibrational frequencies, suggesting that the compression of π-electrons plays a non-negligible part in both graphite and graphene under high pressure.
△ Less
Submitted 27 August, 2015; v1 submitted 15 February, 2015;
originally announced February 2015.
-
The Significance of Bundling Effects on Carbon Nanotubes' Response to Hydrostatic Compression
Authors:
Y. W. Sun,
I. Hernandez,
J. Gonzalez,
K. Scott,
K. J. Donovan,
A. Sapelkin,
F. Rodriguez,
D. J. Dunstan
Abstract:
The study of the G-mode pressure coefficients of carbon nanotubes, reflecting the stiff sp2 bond pressure dependence, is essential to the understanding of their extraordinary mechanical properties as well as fundamental mechanics. However, it is hindered by the availability of carbon nanotubes samples only as bundles or isolated with surfactants. Octadecylamine functionalized carbon nanotubes are…
▽ More
The study of the G-mode pressure coefficients of carbon nanotubes, reflecting the stiff sp2 bond pressure dependence, is essential to the understanding of their extraordinary mechanical properties as well as fundamental mechanics. However, it is hindered by the availability of carbon nanotubes samples only as bundles or isolated with surfactants. Octadecylamine functionalized carbon nanotubes are mostly of a single diameter and can be stably dispersed in 1, 2-dichloroethane and chloroform without surfactants. Here we perform high pressure Raman spectroscopy on these tubes and obtain their experimental G-mode pressure coefficients for individual tubes and bundles. The G-plus pressure coefficient for bundles is only about half of that for individual tubes in 1, 2-dichloroethane and is about two-thirds in chloroform. The G-minus pressure coefficient for bundles is about one-third of G-plus in 1, 2-dichloroethane and about the same in chloroform. These results for the first time provide unambiguous experimental evidence of the significant effect of bundling on carbon nanotubes' G-mode pressure coefficients, identifying it as one of the major reasons for the lack of consensus on what the values should be in the literature.
△ Less
Submitted 17 February, 2015; v1 submitted 21 November, 2014;
originally announced November 2014.
-
Design rules for dislocation filters
Authors:
Tom Ward,
Ana M. Sánchez,
Mingchu Tang,
Jiang Wu,
Huiyun Liu,
David J. Dunstan,
Richard Beanland
Abstract:
The efficacy of strained layer threading dislocation filter structures in single crystal epitaxial layers is evaluated using numerical modeling for (001) face-centred cubic materials, such as GaAs or Si(1-x)Ge(x), and (0001) hexagonal materials such as GaN. We find that threading dislocation densities decay exponentially as a function of the strain relieved, irrespective of the fraction of threadi…
▽ More
The efficacy of strained layer threading dislocation filter structures in single crystal epitaxial layers is evaluated using numerical modeling for (001) face-centred cubic materials, such as GaAs or Si(1-x)Ge(x), and (0001) hexagonal materials such as GaN. We find that threading dislocation densities decay exponentially as a function of the strain relieved, irrespective of the fraction of threading dislocations that are mobile. Reactions between threading dislocations tend to produce a population that is a balanced mixture of mobile and sessile in (001) cubic materials. In contrast, mobile threading dislocations tend to be lost very rapidly in (0001) GaN, often with little or no reduction in the immobile dislocation density. The capture radius for threading dislocation interactions is estimated to be approx. 40nm using cross section transmission electron microscopy of dislocation filtering structures in GaAs monolithically grown on Si. We find that the minimum threading dislocation density that can be obtained in any given structure is likely to be limited by kinetic effects to approx. 1.0e+04 to 1.0e+05 per square cm.
△ Less
Submitted 13 July, 2014;
originally announced July 2014.
-
Pressure coefficients of Raman modes of carbon nanotubes resolved by chirality: Environmental effect on graphene sheet
Authors:
A. J. Ghandour,
I. F. Crowe,
J. E. Proctor,
Y. W. Sun,
M. P. Halsall,
I. Hernandez,
A. Sapelkin,
D. J. Dunstan
Abstract:
Studies of the mechanical properties of single-walled carbon nanotubes are hindered by the availability only of ensembles of tubes with a range of diameters. Tunable Raman excitation spectroscopy picks out identifiable tubes. Under high pressure, the radial breathing mode shows a strong environmental effect shown here to be largely independent of the nature of the environment . For the G-mode, the…
▽ More
Studies of the mechanical properties of single-walled carbon nanotubes are hindered by the availability only of ensembles of tubes with a range of diameters. Tunable Raman excitation spectroscopy picks out identifiable tubes. Under high pressure, the radial breathing mode shows a strong environmental effect shown here to be largely independent of the nature of the environment . For the G-mode, the pressure coefficient varies with diameter consistent with the thick-wall tube model. However, results show an unexpectedly strong environmental effect on the pressure coefficients. Reappraisal of data for graphene and graphite gives the G-mode Grueuneisen parameter gamma = 1.34 and the shear deformation parameter beta = 1.34.
△ Less
Submitted 3 August, 2012;
originally announced August 2012.
-
Raman excitation spectroscopy of carbon nanotubes: effects of pressure medium and pressure
Authors:
A. J. Ghandour,
A. Sapelkin,
I. Hernandez,
D. J. Dunstan,
I. F. Crowe,
M. P. Halsall
Abstract:
Raman excitation and emission spectra for the radial breathing mode (RBM) are reported, together with a preliminary analysis. From the position of the peaks on the two-dimensional plot of excitation resonance energy against Raman shift, the chiral indices (m, n) for each peak are identified. Peaks shift from their positions in air when different pressure media are added - water, hexane, sulphuric…
▽ More
Raman excitation and emission spectra for the radial breathing mode (RBM) are reported, together with a preliminary analysis. From the position of the peaks on the two-dimensional plot of excitation resonance energy against Raman shift, the chiral indices (m, n) for each peak are identified. Peaks shift from their positions in air when different pressure media are added - water, hexane, sulphuric acid - and when the nanotubes are unbundled in water with surfactant and sonication. The shift is about 2 - 3 cm-1 in RBM frequency, but unexpectedly large in resonance energy, being spread over up to 100meV for a given peak. This contrasts with the effect of pressure. The shift of the peaks of semiconducting nanotubes in water under pressure is orthogonal to the shift from air to water. This permits the separation of the effects of the pressure medium and the pressure, and will enable the true pressure coefficients of the RBM and the other Raman peaks for each (m, n) to be established unambiguously.
△ Less
Submitted 10 May, 2012;
originally announced May 2012.
-
Analysis of the inverse square-root size effect in the plasticity of metals
Authors:
T. T. Zhu,
B. Ehrler,
X. D. Hou,
A. J. Bushby,
D. J. Dunstan
Abstract:
Small-scale mechanical behaviour shows significant departures from classical elastic-plastic theory. In a remarkable number of instances, the strength of a material appears to scale as the reciprocal square root of the smallest length scale. There are several recent experimental and modeling results in the literature that show an interaction between dimensional (extrinsic) size and microstructur…
▽ More
Small-scale mechanical behaviour shows significant departures from classical elastic-plastic theory. In a remarkable number of instances, the strength of a material appears to scale as the reciprocal square root of the smallest length scale. There are several recent experimental and modeling results in the literature that show an interaction between dimensional (extrinsic) size and microstructural (intrinsic) size effects. In this paper, we present a mechanical model that naturally produces the inverse square root strengthening and derive an expression for the effective length when both the extrinsic and intrinsic size effects are significant. The theory fits well to data from a wide range of deformation geometries and includes the interaction between the microstructural and dimensional size effects. Furthermore, this approach is able to predict the size effect under uniform deformation without strain gradient.
△ Less
Submitted 29 October, 2009;
originally announced October 2009.
-
Quantum molecular dynamics study of the pressure dependence of the ammonia inversion transition
Authors:
I. M. Herbauts,
D. J. Dunstan
Abstract:
The mechanism of the shift, broadening and quenching of the ammonia inversion frequency with gas pressure has been a problem of lively interest for over seventy years. A simple quantum model of the ammonia molecule perturbed by collisions with ideal gas molecules displays the essential features of the experimental data for NH3 and for ND3. The model does not display the behaviour expected from t…
▽ More
The mechanism of the shift, broadening and quenching of the ammonia inversion frequency with gas pressure has been a problem of lively interest for over seventy years. A simple quantum model of the ammonia molecule perturbed by collisions with ideal gas molecules displays the essential features of the experimental data for NH3 and for ND3. The model does not display the behaviour expected from theories of quantum localisation such as quantum state diffusion and decoherence. On the other hand, models of perturbed classical oscillators do display similar behaviour to our model. The quenching of the ammonia inversion transition cannot therefore be interpreted as spatial localisation of the wavefunction.
△ Less
Submitted 15 April, 2007;
originally announced April 2007.
-
Localisation of a wave-function by superposition of different histories
Authors:
D. J. Dunstan
Abstract:
Quantum state diffusion shows how stochastic interaction with the environment may cause localisation of the wave-function, and thereby demonstrates that quantum mechanics need not invoke a separate axiom of measurement to explain the emergence of the classical world. It has not been clear whether quantum state diffusion requires some new physics. We set up an explicit numerical calculation of th…
▽ More
Quantum state diffusion shows how stochastic interaction with the environment may cause localisation of the wave-function, and thereby demonstrates that quantum mechanics need not invoke a separate axiom of measurement to explain the emergence of the classical world. It has not been clear whether quantum state diffusion requires some new physics. We set up an explicit numerical calculation of the evolution of the wave-function of a two-state system under interaction using only the physics explicitly contained in quantum mechanics without an axiom of measurement. The wave-function does indeed localise, as proposed by quantum state diffusion, on eigenstates of the perturbation. The mechanism appears to be the superposition of histories evolving under different Hamiltonians.
△ Less
Submitted 9 June, 2005;
originally announced June 2005.
